The final stage of construction is the outer decoration of the private house. From how the facade finish will be performed country houseAnd from which material will largely depend on the attractiveness of the appearance.
The protection of the bearing walls of the house from unfavorable weather conditions is also directly dependent on the quality of the cladding.

Any house is designed to perform several functions.
It:

• aesthetic appeal of the appearance of the house;
• hide building defects;
• protect the bearing walls from the impact of unfavorable weather conditions;
• ensure in winter and in the summer comfortable conditions accommodation;

It should be remembered that all new buildings are settled. Departures outdoor facing did not crack and did not finish it, it should be done only after the house is mounted.
It should also be borne in mind that any facade cladding is an extra load on the foundation. Therefore, with a type of finish, it is necessary to decide in advance and in accordance with this arrange the foundation.

What material is frozen facades

Lower facade own house One of these ways is:

• natural stone;
• artificial stone;
• siding;
• wooden lining;
• block house;
• facing brick;
• decorative tile;
• stone crumb;
• combined finish;

Facing with natural stone

Facing facade natural stone guarantees durability and original appearance.

Most often, natural stone is separated by the basement of the house, but there are often cases when the natural stone is facing the outer walls of private houses completely or in combination with other species.
Finishing with natural stone of bearing walls at home is:

• high quality;
• protection of walls from bad weather;
• attractive appearance for long decades;
• strength;

Such natural minerals are used for facing facades of private cottages:

• Granite - the most common stone for exterior decoration private houses. Its distinctive characteristic is high strength and durability.
• Marble - It is easily processed, polished marble has a rich palette of colors and shades, it is one of the most expensive finishing materials.
• Basalt - Its characteristics are very similar to granite.
• Quartzite - very hard mineral, differs from others natural stones Inclosure of quartz grain.
• Limestone - For external facing, its more dense varieties are used.
• Sandstone - Very porous, soft mineral, easily leaning grinding.
• Slanets - One of the most inexpensive representatives of natural camas, in the external finishing of facades, found an application due to its original, layered appearance.

Facing with artificial stone

Artificial stone on the construction market appeared quite recently. Today, this finishing material is widely used for private houses.
It is quite difficult at a glance to distinguish from natural stone. It became popular in connection with a low cost, practically unlimited decorative capabilities and simplicity of laying.
The composition of artificial stone includes:

• acrylic or carbomid resins;
• polymer concrete;
• cement;
• various dyes;

Polymer binders increase strength and improve performance.

When choosing this finishing material, ask for its composition. Some polymers can be harmful to health.

The dimensions of artificial tiles vary widely. Their area can be from 5 cm² to 0.5 m² and a thickness of 1-2 cm. The thickness of the stone imitating a cobblestone can be up to 10 cm.

Exterior finish of a country house siding

Of all the types of siding, which are produced by industry, only two are applied to finishing facades of private houses:

• vinyl siding;
• wooden siding;

Vinyl siding is the most universal. It is used for the device of ventilated facades.
Vinyl siding possesses such properties that caused its popularity:

• durability;
• attractive view;
• ease of installation;
• extensive color gamut;
• good ventilation of bearing walls;
• fire safety;
• efficiency;
• environmentally friendly, harmless to health;

Wooden siding - This is the same wooden lining, which is done not from solid wood, but from wood fibers, which are compressed using various resins.

From vinyl siding, it is distinguished by such properties:

• requires care as genuine wood;
• fire harassment;
• much more expensive;
• limited service life;
• some resins used in its manufacture can be harmful to health;

Facing the outer walls with wooden clapboard

The lining is made of natural wood. It is a board, a thickness of up to 16 mm, from which, on the one hand, spike, and on the other hand, groove Defects.
Wooden lining made from such wood:

• pine;
• oak;
• alder;
• beech;
• linden;
• ash;

Figure figures indicate:

1. insulation;
2. vapor-permeable membrane;
3. wooden lining;

But it should be borne in mind that the tree is short-lived material, and without special processing the facing does not last long. Therefore, after a certain period of time, all the wooden parts of the facade should be subjected to additional processing.

Outdoor finish of a private house by a block house

One of the options for wooden lining is. It is a treated board, which has one side flat, and the other convex. Assembled

Material for the manufacture of block house are mainly coniferous breeds Trees are pine and larch.
They enjoy the greatest popularity in connection with such characteristics:

• relatively low cost;
• the presence in their composition of antiseptic resins, guaranteeing the durability of such a facade;
• environmentally friendly material;
• excellent thermal insulation properties;
• this wood is not affected by ultraviolet rays;
• well tolerate maximum temperature differences;

Debolic species of trees such as oak, birch or alder did not find such widespread use due to its high cost.
But if you wish, you can order a block house from oak. This is an expensive material, but it looks very impressive and will serve not one dozen years old.

Facing trim facing brick

A good option for finishing the facade of a private house is the use of facing bricks.
Facade finishing brick will solve such problems:

• posted by the facade of your home is a beautiful, unique look;
• protect the bearing walls from bad weather;
• disguise building defects;
• additionally insulate the house;

The facing brick has all the qualities that are necessary for finishing material for outdoor work:

• low thermal conductivity;
• frost resistance and high temperatures;
• resistance to ultraviolet rays;
• a diverse color scheme will solve any design plans;

Facing masonry has a significant weight and therefore under it need to be summed up the foundation. In the new construction, the width of the foundation is calculated taking into account the width of the facing.
In the existing structure, it is necessary to arrange an additional foundation.

Decorative Tile Facade Finish

Every year more and more grow requirements for quality outdoor decoration private houses. Finishing materials are becoming more and more diverse.
The facade tile is one of the most common materials for outdoor cladding.
It is well suited to the facing of new houses and for finishing already existing ones. At the same time, old houses acquire a completely different, modern appearance.
Available several varieties of facing tiles:

• the terracotta tile - a red clay is on its manufacture, burn it at a temperature of 1300ºC, has a natural clay color, very durable;
• decorative tile with a layer of thin glass coating;
• decorative tile coated with thin layer of ceramics;
• decorative two-layer tiles on which a ceramic coating is applied;

The decorative tile has such distinctive features:

• high strength;
• low weight does not require an additional foundation device;
• does not support combustion;
• very low moisture absorption coefficient;
• environmentally friendly material;
• high frost resistance;
• tile resistant to ultraviolet radiation;

Facing facade stone crumb

Stone crumb is a natural small pebble, which are mixed with the binding and adhesive material.

There is a stone crumb of different colors, and each color still has a lot of shades. Combining with different colors you can achieve unique design solutions.
In construction stores you can buy crumbs from various materials:

• quartz;
• granite;
• marble;

The facade, lined with crumb, is perfectly opposed unfavorable conditions Weather.

The decoration of the outer walls of marble crumb looks amazing.
Stone crumb has such advantages:

• the crumb can be applied to a different base (concrete, plasterboard, plaster, brick, foam concrete, etc.);
• stone crumb is not subject to ultraviolet rays;
• well confronts mechanical effects;
• easily tolerates temperature differences;
• possesses vapor permeability, allows the walls to "breathe";
• has a long service life;

Combined finish of facades of private houses

In conclusion, I would like to say that there are no ideal finishing materials. Each material has its own positive and negative qualities.
Therefore, you should not stop your choice on some one finishing material. We must try to experiment with various types of finishing facade.
Photos will tell you what can be your facade.

The stylish design of the walls of the building is the basis of any exterior of the yard. In order to give their own dwelling individuality, you need to carefully think about the design of the facade of the house, develop a project and choose building materials.

Design options

More and more country houses Eclectic or "rustic" design options are selected. Consider the most interesting of them:

1. Alpine style or chalet;
2. Original design;
3. Country;
4. French direction or Provence;
5. Eastern direction;
6. Modern English style.

The most common options for the design of the facade of a private country house in style. This is a very peculiar direction, its feature is a large number of natural materials from which cladding is made. It is predominantly a tree, but often it is complemented by stones or brick masonry. It is withstanding a soft brown or close to it. When creating such a cladding, it is necessary to take into account the presence of a canopy, which is obligatory in such buildings.

Photo - Chalet

Original style is associated with minimalism or popular high tech. it perfect design for one-storey houses From brick, where the facade should not only complement the landscape, but also be part of the exterior of the yard. Most often there are frame structures, providing additional ventilation of the building. The outer layer of decoration can be built of metal, plastic or glass depending on the possibilities and preferences.

Photo - Facade Modern

Materials To cover modern buildings:

1. Siding PVC. Siding is very simple to flicker the facades, in addition, now there are unique plates that not only provide the perfect surface, but further increase the thermal insulation. it best option For a small frame house;
2. Galvanized professional flooring. Another famous and loved by many masters option. The profile is made of cold-rolled rolled steel treated with a variety of polymers and zinc. This increases its strength and durability. Also, the metal base significantly strengthens the walls, protects them from negative impact. ambient and reduces the fire hazard of the building;
3. Wooden siding. For design simple home in classic style with High Tech elements ( big windows and plastic) quite often use various wood coatings. They have nothing to do with natural wooden blocks, but it is practically completely transmitted to both the color and texture of a genuine timber.

In addition to the use of individual overhead facing, the modern uses the plaster of the walls of the core, "fur coat" or mosaic. This is a great urban solution, if you need to combine the availability of processing and beauty of the surface.

Country - Optional design of the facade of the village house under the tree. As follows from the name, it is a fairly light style, the main role is played by wood. Unlike Chalet, Country very rarely combines several coatings, most often it is bars, boards and other wood options.

Photo - Country Style

Modern provence is often called the half-timber. This landscape design It implies a large number of diverse coarse elements in the exterior, but at the same time they skillfully combine with neat and cute details. Facades in particular are complemented by specially treated beams. Earlier, real logs made of wood were used for the facing of the outer coat, but they were too tightened by the foundation, thereby significantly reducing the durability of the building. Now outside the house is covered with a special tile or overhead boards that simulate the present coating.

Photos - Provence or Fakhverk

Building eastern style It is impossible to confuse any other. They are not covered with tiles, bricks or wood, and are processed with light spacure and paint. It helps to create the effect of a smooth glossy surface. Naturally, such a decoration of a residential building immediately issues the defects of the construction (possible cracks or irregularities), so many builders before creating such a direction pre-insulate the house of foams or thermal stilts.

Photo - facade in oriental style

Monumental english style - This is an artificial brick progenitor on the outer surfaces of the building and the fence. As you know, initially in England, the houses were built exclusively from the stone, this material was perfect high humidity and sharp drops of temperature. Now, thanks to the presence of a huge number of analogues from such technology, they have been departed, but at home still covered by tradition artificial stone or shield.

Photo - English finish

This version of the design of the country or two-story private house is rarely used to cover the entire facade, since such a design is very weighting foundation. Most often, the layer of stone is installed on separate parts of the wall. Materials are mainly used:

1. Granite;
2. Marble;
3. Seven;
4. Slate.

Depending on the solution, you can create a very beautiful and original style of your home. But it must be remembered that on average, the stone takes all the construction of 40 tons per 100 square meters.

It should be understood that if it is incorrect to choose the design of the face wall, then you can not only spoil the landscape design, but also contribute to the destruction of the carrier system of the house. Before starting construction, it is necessary to refer to experts in advice. The development of an individual project will take approximately a week and, depending on the complexity, will cost in the amount of 1000 rubles to several tens of thousands (for example, the project of the facade one-storey house In Moscow in the style of a chalet of 120 square meters. meters has the cost of 3,500 rubles). Also, the price depends on the size of the construction and the number of decorative elements.

Photo - House Finishing Project

When creating a technological map and other calculations, the wizard will take into account not only the desired size and color of the decoration, but also its pressure on the foundation, which is very important for houses on piles or pillars.

1. Be sure to calculate the size of the yard before starting work. Many materials do not withstand the effects of water, so it will be necessary to consider the possibility of expanding the roof or porch;
2. To create a beautiful facade of cottages, it is advisable to use durable durable materialsthat do not require care. This is a natural stone and professional flooring;
3. When choosing a coating, consider not only its texture, but also color. In particular, it is important for the house in the style of Provence and Chale, otherwise it may turn out a completely tasteless design;
4. For the arches from the wood, it is best to choose durable and light breeds: pine, larch, Canadian maple;
5. Before starting work, be sure to browse the photo by which you can develop the design of the facade of the house. This will help you take into account many moments and mistakes, likely in the construction process.

One of the synonyms of the word "facade" is the word "face". Indeed, the facial part of the building plays the role of a peculiar showcase and is considered a business card of the whole house. Along with the decorative, the facade performs the practical function. Back at the design stage, it is necessary to think about the combination of finishing materials, coordinating them with the whole building of the building. The modern profile market presents a variety of finishing materials for facades of houses, which involve the installation of a different level of complexity.

What to pay attention to when choosing materials for the facade?

The need for outer decoration of the facade is caused not only to aesthetics, but also the ability to significantly increase the performance characteristics of the building. Thinking in what material to separate the facade of the house should pay attention to such criteria:

Resistance to atmospheric precipitation and climatic manifestations;

Resistance to moisture and frost;

Thermal insulation level;

Environmental Safety;

The possibilities of material as a design element.

Do not forget to insulate the walls in front of the facade trim

If the use of the simulation material takes place, then it is worth paying attention to the level of its similarity with the original. The soundproofing characteristics of the finishing raw materials and the windproof level are also taken into account. The quality facing of the facade of the house is the key to the strength, durability and aesthetic facade. Featuring optimal materials for building facades, it is possible to increase its life and add originality to a general design. When selecting facing materials, it is also worth making the complexity of installation and cost.

Types of facade finish

Modern finishing of facades of private houses is most often carried out with following species Finishing materials for the facade:

Facade plaster - The material is the most "ancient" and popular way of cladding, requires good preparation of walls. There are many types of plaster - silicone, silicate, acrylic, etc.

- inexpensive facade facing material. Vinyl view It is usually installed on houses in moderate climates, as it is quickly heated from high temperatures.

Brick facing - Classic finish type, made from cement and sewer. It has high operational and aesthetic characteristics.

Clinker tile - Durable material for finishing facades, resistant to abrasion, therefore it is installed most often in places with high permeability so that the facade does not lose the appearance due to many numerical contacts.

Panels - optimally suitable for finishing the facade and can be different species: Metal, wooden, glass, polyurethane foam, etc.

Choose material correctly

Facade plaster

Such material finishing facades, as the plaster is used very often and is characterized by simplicity of application. Its main purpose is to create an attractive appearance of your finishing of the house and protection against climatic influences.

Advantages of a modern finish decorative facadenoah plaster:

Wide decorative features - creating different textures and color solutions.

Simplicity of application;

Resistance to temperature fluctuations;

Moisture resistance;

Low cost.

However, if the finishing technology was broken, then cracks, swelling, spotty, peeling the finish layer possible. Plastering the facade of a private house - a simple process that can be implemented own forces, If there are minimal skills in this area.

Decision to separate the facade siding will allow the owner of the house to get good result And the beautiful appearance of the building. Vinyl and metallic siding is considered the most popular.

Pluses of vinyl:

Of the minuses of vinyl siding, you can note:

Metal siding for facade cladding is most often made of aluminum.

Facing brick

The use of facing options for trimming of a brick gives the house respectability and solidity. Perform the installation of this material should be professionals, as the process requires certain skills.

Pluses of facing brick:

Does not require special care;

Frost-resistant;

Environmentally safe;

The facade acquires strength and stability;

Brick protects the house from atmospheric precipitation and other climatic manifestations;

Adds the service life of the carrying structures;

A wide range of textures and color solutions.

By cons of facing facades of houses, bricks can be attributed:

Education with time white Nalea (Svyola) that spoils the appearance of the building;

High price material.

A special method of processing of clay allows you to achieve the clinker tiles of high operational indicators. As a result, the optimal facing material is obtained, which for all indicators is suitable for outdoor use.

Advantages of clinker tiles:

Strength and not exposure to mechanical effects;

Resistance to ultravioleti;

Frost resistance;

Low water absorption;

Durability.

The familiar for us all the lining is the very first view. facade panels. Already after it began to use various variations of this cladding, making it from metal, porcelain stoneware, stone, polyvinyl chloride.

What are the advantages of facing at home by panels:

Installation of cladding does not require long preparatory workmay be carried out under all weather conditions, the process of laying passes quickly;

The facade is reliably protected from the temperature difference and other adverse effects;

The material is not combustible;

Does not require special leaving;

Small weight.

What material still choose to finish facades?

Picking best Material For the facade, it should be considered from which the house is built. After all, wooden I. bruce housesFor example, require the construction of a ventilated facade, and for such needs it is optimally suitable for siding or panels. While brick and stone buildings "love" plaster and brick. You should also focus on your financial capabilities, because the market of modern finishing materials of the facade is so large that the requests of any category of citizens will satisfy. Facing must be perfectly combined with common design Buildings and act with a single ensemble.

Read about previous construction stages:

Beautiful and stylish design of the facade of the house will highlight it among many buildings. But also chosen for work materials are carried and practical value. They allow you to protect the walls of the structure from the negative impact of precipitation. Additionally, under the selected raw materials, you can position the insulation, a vapor barrier film. Such a multi-layered "exterior" will create optimal conditions Home Supplies. It is also important and selection of decorations for walls. These include a variety of columns, eaves. Such components will easily stylize the structure and emphasize its uniqueness. Lighting devices can be attributed to the auxiliary components. Their location around the mansion and on the walls themselves will provide the convenience and safety of the movement of the owners through the courtyard area, around the construction in the evening, night time.

Choosing style

The exterior of the private house speaks a lot about its owners: their tastes, preferences. The most popular styles for house design include:

• Modern. Does not do without high windows with thin frames. The exterior should be restrained and is usually performed in bright or gray tones.

• American. Optimal solution For single-storey buildings, elongated horizontally. It is characterized by a complex roof design (skate - minimal), compliance with symmetry.

• Classical. The classic requires strict adherence to symmetry. But objects can have any forms: complemented by rounded verandas, mansard floors.

• Chalet. Stylistics is inherent in the presence of a near-roofing, walls of walls outside and inside with a tree, the presence of open balconies and a veranda.

• Fack. German stylistics involving light staining of the walls and their decoration with wooden beams.

• Rustic. To finish such buildings, only a tree is used. Characteristic features: the presence of carved skates, shutter.

• Japanese. The direction is inherent raised in the corners to the top of the roof, light walls, dark corner decor, simple layout.

What color to choose and how to pick it up

The original design of the facade of the country house can be drawn, paying attention not only to the stylistics, but also on the selected colors. They can affect the perception of the object and emphasize its advantages. Therefore, when choosing the optimal range, such rules should be used.

1. Light killers are recommended for small objects: they will allow you to visually bring the structure. Dark kernels, on the contrary, remove the object and focus on the environment (even if the lawn is only around).
2. Bright colors (yellow, orange, red, green) are recommended to use for buildings with simple design and minimal decor.
3. It is allowed to use 3 main colors, 1 of which will be applied to the decor. As an additional, it is possible to use colors obtained as a result of mixing any 2-main koles.

Smooth surfaces make even faded colors brighter. But the rough surfaces of the walls are capable of clarifying and discoloring the kernels.

Facing facing options

When choosing materials for designing a private building, it is necessary to take into account the features of the object itself, its style and weather conditions in which owners live. For example, on top of the foam block walls it is recommended to carry out the installation of sandwiches capable of protecting the porous material from moisture well. For regions where temperature drops are considered frequent phenomenon, it is recommended to buy materials from plastic, polymers. Natural materials are suitable for locations where strong rains or critical heat are observed. It is also worth remembering the complexity of the care of natural raw materials: painting wood and its antiseptic processing will require additional costs after installation. After selecting the appropriate material, you need to design that takes into account the parameters of individual components and the required number of units. All this will significantly simplify the future construction and eliminate errors when conducting it.

A natural stone

The use of natural stone to styling the house is an interesting solution. With this material, you can easily create an old exterior. For operation, many types of stones characteristic are used. The most popular pebbles include:

• Limestone. A breed with a plurality of pores, it is easy to handle. It has a white or light yellow tint.
• Sandstone. It has high density and durability. Sustainable frost. It has a yellowish and light brown tint.
• Travertine. Porous stone of light gray and whitish shade. Promotes additional insulation of the structure, creating correct conditions Ventilation walls.
• Quiccito sandstone. The stone has absorbed the best quality quartz and sandstone. May have a gray, yellow brown tint. Refers to the most durable rocks.

If in the interior of the house (for example, in the lobby) masonry, then such a stylistics of the exterior is recommended.

Facade tile

Stone tile is a profitable substitute for the usual stone intended for styling facades. Material made of natural raw materials has the shape of rectangles and squares. It has a high cost, so it is often used to decorate the corners, laying out the basements. The material allows to emphasize the originality of a country cottage or small house in the suburban zone. Analogs of artificial raw materials also have many shapes and sizes, but at the same time they have a more affordable price. Evalnamed and superior characteristics of such products. They are minimally subject to temperature drops. They are not afraid of constant exposure to the scorching sun. In addition, it is possible to install an artificial tile material under the stone yourself. Each component are mortgages (fasteners). Therefore, fixation is carried out easily and quickly. Self-tapping screws are commonly used in operation. Fasten the components to the crate.

Facing brick

Choice decorative bricks To protect the facade makes home ownership with this pleasure. Unlike other materials, such products are capable of serving long-term owners without requiring special care or treatments. To limit even the biggest building will need a little time. Therefore, the owners remain only to choose the optimal type of materials:

• Clinker. It is manufactured from special clay rocks. Minimally absorbs water, so it has a high frost resistance.
• Silicate. Refers to budget solutions. But at the same time its service life is significantly less than that of clinkers. And it looks very simple.
• Hyperpressed. Refers to the most popular colorful coloring. Such facing material may have a special extensive coating. It is attractive non-standard texture: the material surface seems torn.

Decorative plaster

Facade plaster belongs to the most affordable materialsused to styling buildings. It can be placed both mansion and country house. Thanks to the use of auxiliary tools (rollers, scrapers), the surface of the frozen raw material can be given any kind and relief. At the same time, the owners can plaster housing with their own hands, using such simple tips:

• Before working, it is necessary to purchase everything you need, including an antiseptic to remove the fungus from the walls (if it is available), the kernels for staining the material.
• Plaster raw materials should be prepared for work in accuracy according to the instructions from the manufacturer. Application is carried out at a temperature of +5 to +30 degrees. In dry weather, the walls should be slightly moistened.
• Alignment of the base before applying the material is only in the smelting of the seams (you can use similar raw materials at a more affordable price). In the process of applying, the main material will hide unevenness. Bring out the application of auxiliary paint (for example, gilding, silverness) follows only after complete drying of the main layer.

Registration of vinyl panels

Conducting outdoor veneers with vinyl panels refers to one of the simplest options for creating an unusual architecture. Such material is manufactured as imitation of stone. But at the same time it easily tolerates the heat, and in contrast to the original raw materials. Separate elements are neatly combined with each other, creating a solid surface that has original relief. As for the color scheme, it is diverse: manufacturers offer clients olive, cream, brown, caramel materials. With properly attachment, the product will retain the primordial view for many decades. But even in case of damage, the individual components of the assembled wall can be easily replaced by new: the difference between the adjacent components of the surface will not be visible. Reliable material is suitable for alignment of walls. Under it can be insulating and insulation layers (with additional installation of the crate).

Siding

Siding refers to universal solutions that apply even for prefabricated cottages and similar buildings. Sold in boards-stripes with a length of about 3.5 m. Suitable for walls with any irregularities. According to the type of raw materials, from which it is produced, this building material is divided into such categories:

• Metal. Refers to the budget group. Requires a neat mount, because when damaged, the sheets can be coated with rust and lose the primordial appearance and state.
• Wood. It is made of wood-cellulose mixtures bonding on the principle of MDF. It has a short service life, needs annual staining and protection against moisture, a core.
• Plastic. It has increased wear resistance. Does not fade, not deforming with time. More expensive and reliable analogue of this type are vinyl material. It can easily withstand temperatures from -50 to +50 degrees.
• Fibro-cement. Refers to the most expensive mind. It can easily withstand strong frosts and heat. Not subject to rotting, corrosion.

Combined cladding and its options

Creating a suitable project to stylish your housing, the owners consider the possibility of combined use qualitative materials. With their help, it is possible to allocate individual parts of the structure. Optimal ways to use different types Materials include:

• Split horizontal. The best solution for the structure that has two floors. The lower part can simply align and become stained, and the upper one is to decorate with a bar. Also attractive combination of painted top and stone nose.

• Allocation of the base. Optimally for any buildings. Allows you to visually make the height of the wall more. Materials under wood, stone can be used as highlighting materials.

• Selection of corners, base and input. The best solution will be laying tiled materials and stone. Such a framing for house buildings usually use experienced architects. The separation of the walls on separate parts makes it easy to stylize any construction.

Decorating facade

Suppose the created stylistry will help the choice of different jewelry. Most. simple decision The separation of a multi-storey structure by eaves. They can separate the base and floors, located under the roof. Over entrance door Or in separate "empty" parts of the walls can be placed a small bas-relief. True, it will be appropriate only when styling classics, baroque. The universal type can include columns. Their presence will allow you to make a beautiful big porch with a visor. Near the input door can be installed a pair of vases with flowers or statuettes. You can also choose flat columns with capitals. They visually increase the height of the walls. Rusta belongs to the popular stucco decoration. They are styled under the stone and become an excellent frame of the corners, suitable for vertical separation of the structure.

Decorating windows and doors

Select windows and doors in the structure will help the use of stucco. It will stylize these parts of the structure and make them unusual. The original replacement (for example, in the German style) will be used wood materials. It can be just lumber framing openings or carved parts. When choosing such products, you should not forget about the window on the attic. For him, you can choose more complex in performance and more beautiful framing. But the spacious accommodation will look very nice with backlight or suspended flower pots. Such stylization will give the structure a special comfort and make it unique. The framing of openings and stone is allowed. It may be the same or differ in size and shape. As for balconies, the railing for them must fully correspond to the selected stylistry. They can be plaster, bought from metal or manufactured from sawn timber.

Lighting facade

High-quality lighting around the construction allows owners at any time of day to be safely moved through the territory of the yard. When choosing lamps, it is recommended to give preference to street models that are fastened to the walls. They will ensure the most accurate lighting of the perimeter of the structure. Select such illuminators should be made according to the accommodated housing style. So, luxurious buildings can be complemented by small lanterns, and the objects in the stylistic minimalism are better equipped with spotlights. For low buildings, the location of the illuminators is optimal directly under the roof. Open and closed terraces should be lit separately. After all, it is here that households can hold rest along with guests. Above the entrance door must necessarily make external lighting. The optimal option will be the installation of a standard type lamp or with a motion sensor.

Conclusion

For each owner, one's own housing is not just a structure, but also a real generic nest. Therefore, the owners want to give him such beauty that will allocate the original building against the background of others. Starting work in this direction follows from the choice of optimal stylistics. It will easily determine the required materials and make a plan of work. Also do not forget about suitable color gamma. She is able to influence the perception of housing, make it extraordinary. Additionally, it should be selected and separate decorations of windows, doors, walls themselves. They are used to underline the stylization, visual increase Building or its separation into parts and floors. Follow simple recommendations and advice in carrying out all stages will make it easy to transform even very an old house or recently erected object.

Estimates 0.

The facade of the house is that his outdoor part, which is the first to see everything who came to you with a visit. From how it looks like, the impression is largely dependent on the guests of the house. By the facade you can judge the status, material well-being and artistic taste of those who live behind him. In addition, he has its own functional tasks. It is desirable that the design of the exterior finish of the house harmonized with the surrounding landscape and corresponded to the style interior decoration. At the same time, protects the walls and overlappings of the construction from external influences.

That is why it is so important to seriously treat the question and think over the design of the facades of houses and cottages. Do not forget that you and your homemade will also have to look at him every day. And if you can simply throw in the living room in the living room, then with the update of the facade everything is much stuck it and more difficult.

Finishing Facade of the First Floor decorative stone, and mansard plaster

Facade design styles

Naturally, the design of the facade of the private house depends on the selected style, and in turn, from the preferred material, and on the contrary, if you first decided on the style, the construction and construction and decorative materials. Possible options for finishing the facades of cottages are as follows:

Modern and modern;

Pseudorussky;

ArtDeko or classicism;

Ampire or baroque;

Canadian or French;

English or Dutch;

Gothic or Romanesque;

East Asian;

Eclectic or header.

As a rule, the design of the cottage facade corresponds to the architectural style of the house. Justice to say that it is extremely rare modern designers Use some one direction. Typically combined two or three similar style. But often the most beautiful facades of houses are created precisely by contrasts. If you want to build an unusual home so that it stands out among buildings in typical projects, you cannot do without a professional designer.

Registration of the facade of the house in Art Nouveau style

The facade begins with the project

Without competent, high-quality project to build reliable and beautiful house It is impossible. If you do not have at least the middle skills of the builder and the knowledge of the architect engineer - do not attempt to save, please contact a specialist immediately.

Creating a project facade for the house includes such main stages:

Determination of the type of facade design, a selection of building materials.

When the house is built from scratch, the facade is thought out with the "box" of the building: the project is approved, optimal materials and so on are approved. If work is carried out on changing the stylistry for a long time built at home, then a specialist is necessarily going to produce all the necessary measurements.

Drawing up various facade design options, primary projects.

Select the best option.

Development of a detailed project and compiling estimates.

Lastly, decorative facade elements corresponding to the desired style are selected. The design of facades of houses and cottages is always approved with your wishes. But to listen to the recommendations of the designer and builders are also necessary, since there are many non-nuances on the surface of the nuances in combination of materials. Otherwise, you can never build a house of your dreams, live in which will be pleasant and safe.

Classification of facades based on materials

The project of the facade of the house should be thought out to the smallest detail. To begin with, it is worth understanding which materials can be used to design facade surfaces, in which their features, advantages and disadvantages. IN modern construction Apply both classic materials and innovative, which appeared on the market recently. You can choose:

tree or wooden plaquen;

stone ordinary or ground;

brick or ceramics;

concrete or composite;

plaster different species and textures;

siding or metal;

glass or plastic.

Each of the types of finishing materials for the facade, in turn, is divided into different subspecies and types.

Watch on the video Original facade of the house:

Professional builders advise first of all to navigate the climatic conditions of your region.

The facade coating must withstand:

rain, snow;

radiation of ultraviolet and temperature differences;

wind and dust.

And at the same time not to lose its attractive appearance and operational characteristics. Another important factor: the safety of the material and its environmental friendliness. The last parameter is paid in recent special attention.

Take into account your financial capabilities and availability of the selected material - because the facade is not eternal and from time to time it will have to be repaired and updated. Choosing material for the design of facade planes, you also need to decide with the design style.

Facing brick as optimal option Country House Facade Finishes

Finishing siding

Siding is a modern construction and finishing material. It is practical inexpensive. This is a great budget option for those restricted in the means. More often, siding is used to build fences or household buildings - For example, garages. But for the cladding of modern dacha house He is also quite suitable. Especially if you choose not vinyl or steel, but wooden material.

Siding from artificial materials, in addition to affordable and low cost, has several advantages:

durability and durability;

corrosion resistance and biological factors (mold, insects);

wide color gamut.

Siding is easily mounted and dismantled, but despite this, such work is better to entrust professionals. And if you need, the facing is easy to remove and replace on the damaged area, without repairing the entire facade completely.

Important! Siding may not only be metallic, also produce types of wood and vinyl. Wooden siding is environmentally friendly, it decorates the facades of cottages and houses, but not very durable and costs the rest. The vinyl is resistant to ignition and is inexpensive, but did not show itself as a sufficiently reliable and aesthetic finishing material.

Finishing facade siding

On our site you can find contacts of construction companies that offer. Directly to communicate with representatives, you can visiting the exhibition of houses "Low-rise country".

Tile facade trim

Ceramic tile - an excellent solution for the design of the front surface of the Townhouse or country cottage. Ceramics has the following advantages and features:

tile looks beautiful and modern;

she is durable and practical;

solid elements are easy to replace, if necessary;

ceramic tile eco-friendly and non-combustible;

it is appropriate in almost any architectural style due to the variety of forms and textures.

There is only one "but": the material itself is expensive. And its laying is even more expensive.

But there is also good news: it is not necessary to fabulous with tiles completely all the facade from the ground and to the roof. You can put the tile only at the ground level or fragments. Author's design using this material for finishing facades looks very original and aesthetically. Usually the designers have ready solutionson the basis of which you can develop individual project, taking into account your wishes and ideas.

Tile trim process

Finish facade brick

Brick looks always kindly and quite aesthetically, especially modern clinker. This is not the most original, but proven version of the facade facing. Modern manufacturers produced facing brick Various forms, textures and colors. Create an unusual composition and thus give a highlight to the overall style of a country house will not be a lot of work.

Facing brick is performed at the construction stage, in parallel with the construction of walls and roofs. But you can apply the brick and to the restoration of the old building, for example, if it is decided to make a ventilated facade.

Facade of the country house from clinker brick

Tree in facades

Tree is undoubtedly one of the popular materials for beautiful finish Country house. It combines superbly with country styles, Russian, Finnish, chalet. Wooden trim uses for decorating a house of american ranch.

What you need to consider must:

the tree requires additional processing with special means that protect it from external factors, mold and insects;

wood - easily flammable, combustible material;

boards have a property over time to dispel and deform, be sure to take into account the shrinkage of the walls.

Finishing facade house with wooden panels

External stone finish of the facade of a private house

Stone facing always looks solid and rich, even in modern High-tec. You can use natural breeds:

• seven or limestone;

  sandstone;

  dagestan stone, etc.

Cheaper will cost an artificial stone house. It is made of acrylic resins and cement, the surface can imitate any kind of natural stone and is visually not different. But at the same time, the artificial stone is much easier and easier to work with it.

The main feature of the stone: its thermostatic properties. That is, in winter it will keep warm in the house, and in the summer - on the contrary, coolness. At the same time, the stone through a variety of textures, drawings and shades, looks very aesthetically and unusual. You can create stunning compositions, thanks to which your home will immediately turn into an architectural exclusive.

The stone is perfectly combined with almost all other finishing materials, so applicable in any architectural style.

Partial finish facade house with artificial stone

Plaster as a type of material for finishing facade

We can safely say that the plaster is the most popular and widespread material for finishing the facade of any construction, not only a country house. Such facades in the circle of professionals are called "wet" due to the technology of preparing and applying the solution. And the material itself, and work with it is relatively inexpensive.

Stuccoings, even the cheapest, are different. Most of the modern compositions are distinguished by high performance characteristics, durability and environmental friendliness, so that they are recommended for decoration of walls from "breathable" materials ..

But it is important to take into account the level of plasticity of the mixture in the frozen form. Some plaster with the slightest vibrations and mechanical effects crack and creep. For outdoor finishing at home, especially standing on urban street or near autobah, such plaster is not suitable.

A great advantage: plastered walls, as a rule, are additionally painted. If you wish, you can repaint them every season by changing the style and appearance of your home. Masters advise to stop their choice on silicone plaster - she combined the best qualities and advantages of other types.

With a competent approach, even the simplest facades of cottages will look beautiful, the photo below presents good things example.

In the photo Completed finish of the facade of a country house with plaster

Mixed facades of private houses

See the selection of various facades of houses on video:

Mixed style in architecture is called fusion. It's not just a connection different materials, For example, the bottom of the stone facade, and the top is from the brick, as some believe. This is a completely special combination of different styles, where elements of one direction are smoothly moving to another, or on the contrary, contrast sharply.

Fusion can be an ideal solution for those who do not have large finances, and would like to use the remnants of different materials. Many begin to design the facade fusion, relying on their strength and knowledge, but in the end, they give up and turn to professionals that correctly pick up materials and colors, thereby creating a unique and wonderful style.

Fusion Facade Design

Design decorations facades

The designer decor on the facade is what will make the construction completed and emphasize this or that style. Although the decorations are mounted in the last place, we need to think over their type and location at the construction stage. At least, it is advisable to do it. Well, if it is a person who knows what the design of the facades of private houses, the photo of the examples of which can be viewed by coordinating the final result with it.

What is used most often:

stucco, a variety of bas-reliefs, frescoes and sculptures;

towers and arches;

erkers and balconies;

eaves and rusts;

columns and capitals.

In addition to these elements, the facades are also decorated with forged products - lattices, window sills, visors and fences or living vegetation. A stone or brick facade of the house, served by grape vines or roses, look very picturesque and attractive.

Facade of the house decorated with vegetation

And one more point, which can also be attributed to the finish decor of the facade - this is a backlight. Thoughtful, competent lighting in modern decoration necessary. With it, you can hide small errors and emphasize those elements that you consider the most significant.

Decorating the facade of the house backlight

Stock Foto Different types and styles of the facade of country houses and cottages

How can the facades of houses look like, photo two-storey houses and not large single-storey with finishing from different materials:

Original facade trim stone and plaster

Russian style facade

Modern house with facade in alpine style

Facade in American Colonial Style

Gothic style facade

Original finish of the facade of the house with an attic in the classic style

Facade finishing with artificial stone and plaster with elements of designer decoration

The facade of the house is made of tiles, and the balcony is decorated with decorated wrought railing

Original drawings on the facade of the house

Watching facade with green ornament

Mixed Country House Facade

Conclusion

You could make sure that plaster and brick are far from the only options for finishing a country cottage. Do not dwell on some one finishing material and style, in fact their great set. A variety of ideas and solutions allows not only to create an original and stylish facade of your home, but also to choose an option acceptable at cost.

Estimates 0.