Clematis is able to combat anything with his luxurious blossom. So I failed to resist his charms and caught fire to put on my site of this handsome. For a short time, I learned all the secrets of care for him and acquired cherished seedlings.

But the plant is wearing, so the question immediately arose about such an important stage in the cultivation of Clematis, as the arrangement of support for these Lian. Make them with your own hands does not represent much difficulty, the main thing is not to disregard the peculiarities of your own garden and the need of the plant itself.

Clematis is a curly plant, a kind of Lian. Without a reliable support of his branches, they will simply spread out on the ground, constantly falling under his feet. And with the help of a suitable support, you can easily decorate the garden, gazebo, walls with shirma with clematis.

A similar method of cultivation contributes to the full development of Lian and more fluttering flowering. In addition, it performs a sanitary function, since the plants unfolded by the soil are not ventilated, the liquid is stored, as a result, a favorable microclimate is created for all sorts of diseases.

Features of the supports for Clematis

You should start with a detailed study and selection of options suitable for you. Decide with the type of support that fits well in the design of your garden, determine the list of materials necessary for its structure.

An important aspect on this issue will be the variety of your Clematis. Moreover, the biological and decorative characteristics of different varieties are often a decisive factor.

So, for an interesting composition in the form of a carpet, the "Space Melody" and "Jubilee 70" are perfect. Characteristic feature Data varieties is that inflorescences are located from the roots to the top of the top evenly. For beautiful garlands and cascades, the "climber", "Serenade Crim" and "Birzinka" successfully apply.

To create a cylindrical element as a support, planted varieties that do not cling to as much as possible - this is "white dance", "Alenushka", "Singai Bird" and others.

When creating support, think about the fact that it is possible to close it by Liana only in the summer, and in the cold season it will be open. Therefore, Her. appearance It should be quite decorative and well fit into the surrounding space even in winter.

Features of the soil in your garden play an important role, because the construction, first of all, should be strong reliable, able to easily withstand the mass of the adult bush. As a material used for the supporting structure, applied depending on its variety variety, stairs, wooden and metal arches, rope and much more.

Supports can be attached to the walls of the house and buildings, decorate the windows, doors, tracks, trees or designated designs.

Remember that only plants of one variety are placed on a small layer of support, but you can create on large harmonious composition Immediately from several varieties.

We make support for Clematis

Wicker support from prutics

This is the type of support that looks spectacular even without the presence of Liana. To build it, you will need an ax, boys (you can replace them with a vine), twine and several high barns.

• The base of the stories is sharp, then they are securely stick into the soil at the place of the future landing of Clematis.
• From the lots or branches weave 2 rings, which in size should be so that it can be cuddled to vertical jerse.
• You can install stiffs not in parallel with respect to each other or make the support itself is not equilateral, but then the rings are made unequal.
• Next, the rings at your wish are installed on the rods, the protruding tops of which are spill.
• For the fortress, the rings themselves are well fixed with twine, and in the inner plane of the rings there are interlaced vines, which are fixed around the perimeter of the rings.

Slacher from Bruschev

• To create an interesting cholerar, you will need rails and bars with a thickness of 5 cm.
• The frame itself consists of BRUSEV, already lattice lattice on her. At the same time, horizontal are superimposed on the front side, and the vertical, which are perpendicular to the first, with the reverse. It is desirable to fix them with the help of self-tapping screws, so the design will be stronger. This is especially true of the places of crossing the plates.
• On the spot where the tag will stand must consolidate the support poles. If this is a track of the track, then the sleeper is additionally strengthened with metal corners. In the same way, the Sleoper itself is fixed to the columns.
• For maximum reliability, it is better to build additional supports. So, the sleeper, located close to the wall of the house, is based on her auxiliary bars.

Rabits Mesh Support

One of the simplest, but from this no less interesting ways is to create support for Clematis from the most ordinary chain grid. It does not require any expensive material or special efforts to create it, this support is easy, economical and together with this effect.

• You will need a challenge grid of size corresponding to the desired structure of the structure, a roll of non-body wire, 3 thin plastic supports or any suitable material and a segment of an old electrical cable.
• The most difficult thing in this process will be to stretch the grid, because it has a tendency to constantly twist and tangled. To make it easier for themselves the task divided by half the cable lay down in parallel to each other on the ground, while observing the distance equal to the width of the grid.
• Cable segments casually fasten, so it will be much more convenient to attach to the Rabita to them. After you cope with this task, it's time to do supports.
• 2 of them should be located on the sides of the grid, and the remaining - with the top. Now in the grid stretched to the cable, the side supports do so that the bottom of 20 cm remains free. This part will be underground. The third pipe is extended at the top of the mesh so that the design becomes more stable. All connections are well fixed with wire.
• The resulting design is installed in its place. As a rule, such supports are used to mask and decorate fences. The legs of the support are riveted into the soil in about half a meter from the fencing, the upper part lean to it closely and fixed with self-draws.
• Quite often, Clematis make the porch at home. To do this, with the help of the wire, the trellis design and fasten them with one end over the entrance to the house, the other end is tied to a peg, stuck in the ground near the bush.

It is interesting to Clematis, growing near the fence and stretched on a volleyball net. The lower part of the mesh is fixed on the stakes driven into the ground, and the upper is attracted using hooks or hooked nails to the fence.

Arch for Clematis

The arch can be called the most beautiful design for curly plants. The ready-made options sold in stores are undoubtedly amazed by their diversity, but their cost is not available to everyone. Therefore, many southers-craftsmen make arches on their own.

For their manufacture, we need a pair of long three-meter duralum tubes, 5 pieces of half-meter length, welded grid in PVC insulation, stainless screws and enamel.

• Long tubes are beaten in a pair of identical arcs. The easiest way to give them the necessary shape, stretching them through the pipe. Then they are driven into the soil of 20 cm from each other, short tubes with screws are attached to the bases connecting them between themselves. Finished design paint enamel.
• Then two pieces of mesh are cut off so that their width exceeds the design width to a pair of cells. Their length should be exactly the same. Then, with the help of bruises, protruding cells are converted into protruding rods about 4 cm long. It is with their help that the grid will be attached to the arch. Tighten each twig around the tubes, then install the arch, immersing it into the soil at least 50 cm.

Secrets of Garter Clematis

Regardless of the type of support, the plant's garter should be carried out according to certain rules.

With the help of a twine, the stalk of the plant to the bottom of the structure is bred, and then he is wrapped around several times around the tubes or grid. In the future, the procedure is repeated as needed.

Most often, Liana itself develops on the desired route, only small-bedroom varieties can be called, they need periodic tapping and direction of their growth.

It is important and competently pick up the varieties suitable for a specific corner of the garden. So, on a small cozy site, low fences are recommended to place varieties with large inflorescences.

Luxurious they are on the site, the size of which does not exceed 5 square meters. They are good at the central flower beds and in the parisades. The height of such plants reaches 3 meters.

Beautiful compositions of large-flowered clematis with evergreen bushes and trees. High trees are not rarely decorated with small-ceiling liaans, characterized by powerful shoots and active growth.

In both cases, Clematis is beautifully powered by the branches of trees, descend on the soil with a thick carpet of emerald foliage with bright inflorescences, creating an extraordinary beauty of the composition.

Clematis - that's perfect option To create luxurious partitions, barriers and other elements of the garden. The main thing is to choose to choose support for him, taking into account not only your desires, but the variety and external features of Liana.

The first requirement for the support is strength.

Clematis are rapidly growing and gaining quite large weight, and after the rain, the mass of the flower garland increases several times.

Clematis leaves and pets have a feature at a young age to cover support. Old leaves of such abilities do not have. This nuance should be considered when choosing a support: those parts for which the plants will be cling, should not exceed 1-2 cm in diameter, otherwise Clematis simply cannot cover them. Moreover, clematis prefers rough supports.

An important criterion when choosing a support of gardeners consider group trimming of Clematis. The plants of the second group are tied up, and in the winter it is carefully removed from the support and cover. Clematis of the third group of trimming in the fall is cut and removed from the support.

You can purchase a ready-made support or a sleeper, but you can make it yourself.

Required Support Materials

In the manufacture of support for Clematis, they usually use metal, wood or remedies, such as thrills and branches.

For making metal support (for example, arches) will be needed:

• metal bar diameter 1 cm;
• pipe with a diameter of 3 cm;
• and concrete.

To make it easily support from wood, come in handy:

• wooden bar. 22-23 cm long;
• wooden rails 25 × 60 cm. (In an amount of 8 pieces) 25 × 180 cm. (4 pieces), 25 × 15 cm. (2 pieces);
• as well as nails, hammer, glue and hacksaw.

For creating supports from girlfriend need to prepare:

• high rhe (4 pieces);
• flexible rods or vine;
• spades and ax.

How to make support?

Wooden support

To make a wooden support for Clematis, the bars of the above dimensions are bought into the ground to a depth of 40-50 cm, while maintaining the distance between them in 60 cm.

Distance between bars is sewn mounting plank. Depending on the imagination and wishes of the author: Either figure, or a classic cell.

Two smallest rails (25 × 15 cm) are used to form an inner frame, the remaining twelve - for the manufacture of the lattice.

For better stiffness and stability of the design, they make fasteners between the frames, and also nourish the horizontal bar. At the end of the support is covered with varnish or paint.

Support

The construction of support from undergraduates does not require a significant amount of time or financial costs.

Pilments stick into the ground by pointed ends and are installed vertically in the form of a circle.

Around them, rods or vines are twisted. Such rings need to be done two, and if a support is assumed in the form of a vase, the rings make different diameters.

Then the position of the rings is determined, and they are fixed with twine. If necessary, adjust the height of the poles.

Another embodiment of a simple support is a cone design. On the ground there is a square, in the angles of which long strong sticks are stuck.

On the perimeter of the square add a few of the same sticks, all the tops are connected and associated. With the help of small sticks on the sides of the cone, the grille is created. Such a support is used for more miniature varieties of Clematis.

Excellent support for Clematis can be made from a large-scale chain grid.

To do this, two columns are bought from each other from each other to the ground, and the mesh can be stretched between them and fastened with wire or hooks.

Rabita is better to use galvanized or plasticized.

Soon Clematis completely takes the grid and hides it from the view by forming a living floral wall.

You can not invent any designs at all, but just decorate Clematis the wall of the arbor, a bath or summer kitchen, which will serve as a plating support.

To do this, nails are driven into the upper part of the wall or hooks are fixed, and the clectatsis growing at the bottom are tied with twine and secure them.

Plants necessarily be asleep at 20 cm. From the Earth, since it is in this place that they may be broken under adverse weather conditions.

It should also be considered that it is necessary to plant Clematis at 50 cm. From buildings not to overheating plants and protect them from water flowing from the roofs.

Arch for Clematis do it yourself

The range of various supporting structures for Clematis is impressive, however the title of best deserves the arch. Especially great looks in the colors of the arch at the beginning garden track.

For the manufacture of the arch requires a metallic rod with a diameter of 1 cm. And four cuts of pipe 3 cm. In diameter.

At first, two halves are welded, which after the construction of the arches are bolted.

Cut pipes running on the construction of arched supports are installed in the ground and poured concrete. Similar arches are installed along the track on a meter distance from each other.

To create additional colors of colors between the arches, transverse plates with a 50-centimeter distance are welded. After installing the arch, it is recommended to paint it into green.

How to suspend Clematis, what would he be beautiful on the support?

Choice different materials For fixing the stems of Clematis is unlimited. It is necessary to check the state of the garter regularly: whether it has rotted whether it does not steal shoots and whether it is in place.

The most popular material for the garter of Clematis is twine (rope).

An excellent alternative to the usual twine is colored twine, which makes it perfectly hide the plants attachment places to the support.

Twine and raffia are ideal for garter of soft shoots. For rustic skes better suitable Wire loop.

Paper coating cord is very good for Clematis grown in the container. It is convenient because it can be easily removed when the need for it disappears.

Clematis stem supports are configured evenly in one layer to provide them with good lighting and rich flowering. Properly tied Clematis suffer less from diseases and delight their owners with a luxurious flower garland.

Choosing a support, it must be remembered that it should be not only comfortable and durable, but also aesthetic.

In addition, you need to pay attention to biological features various varieties Clematis.

Clematis - that's beautiful plantsMost of the species of which are lianami, and therefore they need supports.

All about Clematis

On the garden sites It looks very nice. Clematis in this case are always the center of attention. These plants are large-flowered and small mixtures. Luxurious blossom of large-flowered clematis looks great on small sites, such as walls and verandas. Since the area for registration with these plants should not exceed 5 m 2, and the height is 3 m, then these flowers in the frame and on the wall of the house will be wonderful. If large-flowered Clematis serve to design the territory, then they are best planted either at the paralisian, or at the central flower beds of the garden. Small-colorful Clematis are perfectly suitable for vertical landscaping, as well as for facades of the building, stairs, balconies, arbors and in order to cover the unsighteousness of household and economic buildings.

Choosing support for Clematis, you need to know what kind of pruning group includes this plant.

Clematis, which relate to the second group of trimming, must be supported, and also gently remove and stroke for the winter. Clematis related to the third group of trimming, less species, they are cut by autumn, tear off and do not care about the preservation of the branches.

These Liana plants grow rapidly and gain a large mass, and after rain during wetting their weight becomes just huge. Therefore, creating a support for Clematis with your own hands, it should be remembered that the material from which it is made should not be more than 10-12 mm. The support itself should be very durable, comfortable for fastening shoots and have aesthetic look.

Back to the category

Arches and Trelliers for Clematis

Since Clematis are curly plants, they are ideally looking in the form of a decoration of the garden. The best support for Clematis is the arch. It looks great at the beginning of the garden path, all seven in flowers.

Required Material: Metal Rods with a cross section of 10x10 mm, a pipe with a diameter of 30 mm, concrete.

Arched arch do not necessarily install semicircular, it can be flat, duplex or fit. The dimensions and dimensions of the arch depend on its location and functions. Width and height should be such that you can safely go under construction and do not hurt flowers.

To set the arch with your own hands, you will need a rod with a cross section of 10x10 mm (for an arc) and a pipe with a diameter of 30 mm - four segments (for support). First you need to cook two halves, which, after complete installation, the arches must be copped with bolts. Trimming pipes, i.e. Arch supports, you need to install in the ground and pour concrete. When creating a blooming tunnel, the arch is installed at a distance of one meter from each other, and between them the transverse crossbars should be welded that perform the function. These crossbar must be set at a distance of 50 cm from each other. In the shadow of such a tunnel, you can install benches for recreation. After the full installation of the arch, it is best to paint into a neutral color, for example, green.

As a support for Clematis, you can use highs that are usually installed near the house or gazebo. The main material for the cholera is a metal or tree.

Required Material: Wooden timing 220-230 cm long, Wooden rails 25x15 cm (2 pieces), 25x60 cm (8 pieces), 25x180 cm (4 pieces), special glue, hammer, nails, hacksaw.

For the manufacture of 180x60 cm tapers, first bars, which are the basis, it is necessary to fasten well, saving them into the ground by 40-50 cm. The distance between the bars should be 60 cm, and it is precisely to sew the mounting plank. How to do it depends on imagination: either figure (for example, rhombus), or classically (in the cell). The rails of 25x15 are needed to make the inner frame, and the remaining twelve rails are needed to create a lattice. For the inner covering, the cholera need a hacksaw, hammer, nails and special glue. So that the design is more stable and rigid, it is fixed between the frames. For complete fixing from above, a horizontal plank is nailed.

Trelliers can be done on a solid basis, i.e. On earth, knocking them together, or directly at the installation site, i.e. After the foundations of the discharge into the ground. After complete installation, the support for Clematis should be covered with paint or varnish. It is best to install a set of several centimeters from the wall so that the plants can completely assist the grille.

Back to the category

Support for Clematis from Head Funds

Required Material: Four High Pilments, Vine or Yves Rods or Branches After Trimming, Ax, Sword.

First, it is necessary to sharpen the ends of the jersey and stick them to the ground, setting up vertically. Then you need to intertwine branches, such as vines, forming a circle. The ring from the vine should be tightly pressed against the jergows. It is necessary to make two such rings if the support for clematis is in the form of a vase, then the rings need to make different diameters. Next, you should decide on the arrangement of the rings and, if necessary, sprinkle the tops of the poles. After that, you need to fix the rings with a twine so that they do not move in the future. Horizontal interlacing should be made from short branches, fixing their ends in the rings. If the support for Clematis needs to be done higher, then a few more rings should be added.

Supports for Clematis can be made with their own hands

Clematis - Beautiful curly plants with star flowers of simple and terry forms. They are perennials and bloom almost all summer.

Therefore, among plants for vertical landscaping, Clematis occupy a leading position. But so that this luxurious flower fully showed its beauty, it needs a support - decorative, durable and durable.

Many gardeners make such designs on their own. And it is not surprising. After all, the support for Clematis, made by their own hands, can have any design and size, executed from different materials - All at your request.

Several options for such supports.

Option 1. Metal grid - inexpensive support for Clematis

Clematis are well held on a metal grid with large cells.

All you need for this:

road mesh (cells 10x15 cm, rod thickness 4-5 mm, width - 2.5 m);

2 Metal fittings (d \u003d 15-20 mm, length - 3 m);

green enamel for painting.

The armature is welded to the leaf of the road grid.

From the bottom side of the mesh, the reinforcement forms "legs", protruding by 0.5 m. The metal is painted with two layers of enamel to prevent corrosion. The "legs" are knocked into the ground to a height of 0.5 m - it will make the design stable and not fall when the wind gusts.

The mesh wall can be poured not only by Clematis, but also by any other curly: plenty roses, Maiden grapes, Ipomey, Kobei, etc.

Option 2. Truck-cylinder from the grid

The support-cylinder will help to decorate vertical objects: pillars, dry trunks of trees, etc. Such types of supports for Clematis create the visibility of flowering pillars with a height of 1.5-2.5 m - an unforgettable impression!

Support for Clematis do it yourself from the grid

Clematis, especially weakly clinging varieties, can be planted and inside the mesh cylinder

For the manufacture of this support will be useful:

road mesh or PVC coating net;

two fittings - "legs";

wire.

The grid twists in the cylinder, the two sides are fastened with each other. From opposite sides of the cylinder, 2 armatures with a length of about 1 m are welded so that 0.5 m remains free. They are bought into the ground for the stability of the structure.

If a road (reinforcement) grid was used for support, then it must be used. It is desirable - green enamel, which, as Clematis, is growing completely merges with the greens of leaves and shoots. Metal grid covered with PVC, in painting does not need.

Clematis sit down next to the cylinder support. To create a completely seized greenery and column column, it is enough to put 2 Clematis from the opposite sides.

Option 3. Support from stretched cords (threads, rope)

Clematis are perfectly in any sufficiently thin support. Including on dense threads that can withstand the weight of heavy stems of Clematis.

Based on this idea, a support was invented, in which "supporting" elements for Clematis are cords.

Homemade Support for Clematis

Instead metal pipe The basis of the design can be fixed by plastic water pipe

For the manufacture of such supports will be needed:

bicycle wheel;

metal pipe;

wire hooks.

The center of the bicycle wheel is welded a pipe with a length of 2-3 m. Then it is bought into the ground by 0.5 m. It is put on the wheel circumference homemade hooks From wire - 8-10 pcs. On each hook hang over the rope with the same crochet at the end. These hooks are fixed in the ground in such a way that the ropes are tightly stretched.

The advantage of these supports is that they are easy to remove the stems of Clematis when preparing for winter "hibernation". For this, the lower hooks are untied, the ropes pull up. The leaves are easily scrupped without damaging. After that, they can be trimmed and covered.

Option 4. Wall Sword

Wall-mounted trellis are very popular for Clematis, due to the simplicity of manufacturing and high decorative results. It is important that the rails from which such a sleeper is performed are not too wide and thick. Optimally use bars 40x10 mm. Cells should freely skip Clematis sheets, that is, there are no less than 5x5 cm. But not more than 20x20 cm, otherwise the plant will not be able to cling to the next sweets and it will have to be taught.

Wall chopers most often have the form of a frame, on top of which rakes are stuffed in the form of a grid. But we want to offer more interesting option Such trellis is multi-tiered. In this design on 6 horizontal rails, 8 vertical is stuffed. Rakes are used in different lengths for the formation of several flower tiers.

Wooden support for Clematis do it yourself from the rail

Wall-mounted chopper from wooden bars can reach 3-3.5 meters in height and decorate the entire wall of the house, to the roof

The most difficult thing in the creation of this tag is to fasten the horizontal specks on the wall. To do this, the walls are drilled in the wall and "hanging" the rails using a "quick installation" dowels. Top stuffed vertical rails of different lengths in 10-15 cm increments.

Thin rails Wooden trellis

For wooden chopers use thin rails, width of no more than 30-40 mm

Option 5. Wooden Shirma

Shirma is almost the same as Tremer. It only consists of several sections, mainly from three.

The photo below shows a lattice telling suitable for most curly plants.

Wooden Shirma consists of three trellis

For stability in the design, reference pillars are provided (4 pcs.) And horizontal struts (4 pcs.).

Wooden teleling diagram from BRUSEV

Specification Materials for Trellier

Specification of materials required for construction of tow

The process of performing work:

1. Collect the center of the central section. To do this, horizontal rails are superimposed on vertical supports, a compound is fixed with glue and self-drawing.

Build frame from wooden rails

2. Inside the frame, from the wrong side, collect a rhombid grille. Diagonal rails are fixed in parallel to each other. The ends of the planks are roasted at an angle of 45 °. In the places of their compounds with the frames of the frame, the fastening of the embossed jack is flush.

Fastening the rivers Samoresamas

3. Rama rotate the face up. Diagonal rails are fixed on top of the involving lattice.

Assembling a grid grid

4. The intersection of diagonal regches is bonded by self-draws.

Fixation of the joints of the screen swirms

Fixation of the joints of vertical and horizontal swirms.

5. The large arch of the central section of the telling consists of 5 segments. Using a paper template, the contours of the segments are transferred to the board and cut out. The ends of the segments are formed at an angle of 22.5 °.

6. From the segments they collect an arched arc with an external radius of 470 mm. The ends of the arch are connected with vertical stands of the central cholera.

Segments are connected to each other with glue and brackets.

7. From the board, a small arc is cut with an external radius of 100 mm, internal - 60 mm. Fix it from the outside of the lattice, in the center.

8. The rays arches are fixed from the wrong side.

The rays of the Arch will become additional supports for the climbing Clematis

9. Put 4 imparting arches. They are installed in the places of fastening rays with a large arch.

10. Side trellis are manufactured. At first, 2 rectangular frames are collected, and horizontal and vertical rails are fixed on them so that the lattice turns out.

Two lateral trellis are frames with rectangular cells.

11. The reference pillars are fixed on the base (track, concrete site, etc.) with metal corners. Trelliers join the support racks with the same corners.

Supports are attached to the track with metal corners

12. Install 4 struts to enhance the reliability of the design.

Garden support for Clematis, with their own hands made - an element that is simply necessary for competent organization landscape design. This design helps to grow beautiful in the right direction, thereby giving the unique decorativeness to your country site. Many designers actively use these elements in their developments, however, if desired, you can make interesting designs and independently, at home.

Support for Clematis, with their own hands made, maybe several species. Most often there are arched structures, pyramids and fan forms. It should be noted that Clematis, for the most part, is Liana, so the creation of support for it should be taken in advance before landing. When the design is selected, it should be taken into account that it should be durable, reliably fixed, and the material from which it is made should not have in the diameter of more than one and a half centimeters.

The decoration of the garden with their own hands - the occupation is very fascinating, however, for the right organization of the site, some nuances should be taken into account. One of best forms Arch is considered for support. Most often it is performed from metal rods. Such a support for Clematis, with their own hands made, looks great at the beginning of the garden path. Acho in the colors of the arch, as if invited visitors to go to the garden and relax in the shade of the trees.

Support from the cholerar, in with the blooming Clematis, will become a great decoration element (photos of such supports can be seen in many magazines in flower growing). Such designs look perfectly near the gazebo or at home. The easiest way is a support from a rope tied to a peg. It is stretched from the earth itself to the roof of the veranda or country house.

It looks very good such a simplest support for Clematis, with their own hands, on fruit trees: For this, the rope should be crushed around the trunk. Beautiful flowers will be smoothly laying apple trees, pears or cherries, giving the garden uniqueness and elegant look.

Another interesting design is a tripod, made of IV rods or reeds. You can make it in the form of a lattice. Such a support is very stable and provides constant free color support.

You can land Clematis not to the ground, but in a special vase, which is installed. Such vases can be arranged around the perimeter of the site or in secluded corners of the garden.

Good support for abundantly flowering plants It turns out from the metal chain mesh. To do this, it is necessary to pull the large-scale material between the legs-supports, which should be securely secured in the ground. From this material you can make an equally interesting support in the form of a cylinder. Surrounding the surface of the structure, and its middle will remain empty.

As you can see, nothing complicated in the manufacture of supports for flowering plants is not. You will need only a little fantasy and patience, after which your garden will become bright and unique.