Facing a private house is an important final stage of construction. And at this stage, most developers are chosen the cheapest finish of the facade of the house. Why is this happening?

On the one hand, the cladding of its own housing must comply with all the standards of reliability and aesthetics, and on the other, it is obvious that it is not worth throwing out a large amount of cash to the wind, without guarantees that such a decision will be fully justified.

Only one family of ten can afford to choose any finish option, without regard to its greater cost. The remaining 9 families, and this is 90 percent of developers try to save maximum and choose the cheapest way to finish the facade, sometimes even to the detriment of functionality and visual beauty.

To fall in extremes either will not be the most optimal option. If you stop on the budget version, you can lose on the operational characteristics of the facing material. As a result, he will not be well to resist adverse natural conditions, such as: wind, frost, snow, rain. On this score there is a saying "I pay twice twice."

Cheap facade facing house - quite real, just need to choose the most optimal option than cheaper to separate the facade of the house at which all the most best characteristics material. In order to competently separate your accommodation, it should be safely saved, you should decide on the main aspects of the material selection. If you buy a good and reliable finishing material, then this is already 50% of success.

Choosing a facing material

When choosing, you need to know that basically pay attention to the aesthetic characteristics already. There is no doubt that the "beauty" of such a cladding is a very subjective question, because it depends on the individual preferences of each host.

Nevertheless, there are such parameters of facing materials that will not be ignored anyway. You can choose yourself cheap Material For the facade, just need to look at such criteria as:

• the presence of the manufacturer of the facade material of the color lines;
• parameters of resistance to fading and external defects;
• what raw material is made of finishing material, including what he has ecology.

Another important criterion is the durability of the facade. When choosing an inexpensive material, you need to make sure that it does not have to change it every year. Because the cheap facade of the facade of the house, initially low-cost, can turn into annual renovations or repairs, which hurts on the wallet of the economical owner.

The final value of the installation of facade materials

How to get a brick cheap? Buy a good brick with small defects. This can be done at the factory or buy remnants from the dealer in the warehouse.

Choosing this inexpensive facing material, It is possible not to fear that the facade of the house will enlighte. The only minus is that there is a chance of the appearance of hears.

Ceramic tile

Prices for the material are quite low, and the tile itself - the material is reliable, so the house facing by ceramic brick fully justifies the invested cash. The tile is mounted, as a rule, for a long time, but if you have the necessary information on installing facing bricks, you can perform work in the range from 5 to 8 weeks.

Facade melted primer

The facade primer is a material that has become very popular in the trim of facades in the shortest possible time. If the facade of the house is plastened in advance, it is best to use deep penetration primer to favors private housing. For that impregnated with an antiseptic to avoid the appearance of harmful beetles.

As known, appearance At home should create a feeling of comfort and comfort. Therefore, you should not save too much, as it can badly affect the integrity of the house in the future.

Thermophali.

Another economical option is a thermopanel. The facade from this material has a lot of advantages, since it is used with a dense polystyrene foam, which contributes to excellent thermal insulation. In the summer, the house will be cool, and in winter it will not leave warmth.

The installation of thermopanels is carried out with the help of conventional screws, so almost everyone will be able to install themselves in the shortest possible time.

Another worthy advantage is that the panels can be installed at any time of the year, since the material has increased strength.

A natural stone

At all, it is impossible to call a natural stone facade with an economical option. However, where there is an opportunity to get this facade material in fact, it will be the cheapest way to finish the facade.

Where to get a natural stone for free? Go to the nearest quarry with your own trailer or try buying a stone with small defects at the dealer.

You can also buy stone residues after lining large houses. If your home is small, then the remains from the lining of the big house you will be enough to do.

The house performed by this material will look very beautiful. The stone will give him a very original and unique aesthetic appearance. Stone cladding technology is very simple.

First you need to prepare the basis. This stage includes alignment of the surface of the base, with the help of ordinary plaster. Then it is necessary to install extruded expanded polystyrene foam. It is attached with the help of self-tapping screws or dowels. Next to the surface of the slabs you need to apply acrylic primer. End preparatory work The fact that a steel grid is installed on the wall.

Then you need to decide on the mosaic, which will be filled with stone. You can draw a plan in advance in order not to be mistaken during the work. It should be very tried, as the appearance of the facade depends on this. Next, you need to sweep the seams and joints with the solution. After completing the work, experts advise on a stone special varnish to make the color of the material brighter and saturated.

In this way, you can protect the walls from wind, rain and frost. The facade facing natural stone will be the most reliable and, at the same time,.

Output. The cheapest facade of the house is possible if you have chosen the cheapest material for the facade or the material, when installing which you can save.

Also, if you have the opportunity to get very cheaply to get a dear facing material, it is he will give you the opportunity to make an expensive facade of the house of Zadeshevo.

Look, do you have any opportunities for little money to take out a non-banditative natural stone or decorative brick with defects. For these materials, small defects are not critical, but this facade will be mounted on the century, and it will look very impressive.

1. 
   So, you choose the materials that the facade of the facade can be made. What material is better? Photos of different facades with different materials used will help you solve this ...

The most familiar version of the jumpers are those that are made of reinforced aerated concrete. This is the most common way. Ready jumpers for aerated concrete blocks is an independent carrier part, ...
2. 
   The saying "Meet for dressing" will apply not only to people, but also to their homes. Therefore, the facade of the house plays an important role for his owners, since ...

Ladies and gentlemen! Thanks for the work done on how to find my future home. Special thanks to the architect Galina Andreva for her long-suffering and high professionalism, for having lost me from a tearing choice between red and gray, white and green, multicolored and monophonic. I gladly trusted Galina and got rid of headaches. At the same time, I regret that my limited budget did not allow to implement a very successful architectural solution proposed by Galina after a couple of weeks after the start of its work. And before, she had time to surprise me a whole series of sketches and sketches, which would be enough for a whole village - everyone was original and almost ready decision. Despite my indecision, after multiple and long discussions, she managed to find very suitable option Facing at home is inexpensive, non-standard and harmonious. This is the highest pilot! Thanks to Alexey Vatava for the opportunity to communicate with talented professionals, truly loving his business. I wish the company "Design Capital" success in this beautiful creative business.

★★★★★★★ completely satisfied ( 7 out of 7)

"I envy your patience"

Filed in the company Design Capital, having only a design of a constructive, before the construction of construction. Provided the project, photo of houses that like the plan of the site. We were offered several sketches in different colors and materials. They chose who liked the most, and then refined in detail. We were helped to even design a veranda annex, and a little to change the roof, the size of the windows, what would happen as we wanted. In general, the result is completely satisfied! I want to say a big thank you to the company DK and personally designer Andreva Galina! I envy your patience. I hope we didn't strain you much: "Let's make it better in a different way." Now we repeat the second floor, and still Miss Galina with your questions. We really like our home. Good luck and prosperity!

★★★★★★★ completely satisfied ( 7 out of 7)

"Appreciate for the initiative and mutual understanding"

Let me express deep gratitude to you and your creative team for a huge and fruitful work on my project.

Sincerely grateful to you for the initiative and mutual understanding, for your professional and conscientious approach to finding solutions.

I am glad to inform you that we have successfully completed the project and can put the final point. I'm not viewed and approved by me.

"The impression of the company only positive"

I want to express my great gratitude to the whole of your team "Design" and, especially, the architect of Krasnova Mary, with which I directly worked: for the highly professional implementation of the design project of the design of the facade of my country house. The project was performed qualitatively and on time; Maria was taken into account all my wishes and comments.

I also want to note attentive, pleasant in communicating and a very responsible manager - Gonchar Tatiana.

The impression of your company remains only positive, because Your employees are people not only benevolent, but also knowing their customers who understand the requests of their customers; Qualitatively and professionally, and most importantly with love relating to your work.

I am satisfied with the work done, there are no negative moments and comments.

"Operational response to wishes"

Liked the ability of Valentines to listen, the operational response to the wishes and questions. Adjustments and various studies of options were made quickly and without discontent. At some point, voltage from misunderstanding each otherThe designer clearly caught and offered an extra meeting, discussed and everything fell into place.

It's great that the album offers manufacturers and sellers. After passing the album, the designer remains in touch, you can clarify, ask. Therefore, it would be added another gradation in the assessment, "mostly satisfied." "Partially" is somehow not enough. Thanks to the whole team. But most of all Valentina Susina.

What can I improve?: May I would like more detailed information for decor manufacturers. There is regret that not all ideas can be implemented technically, and the customer must be put in the framework, otherwise the idea will disperse with execution.

★★★★★★ ☆ Partially satisfied ( 6 out of 7)

"I liked the organization of work"

I really liked the organization of work and result. I did not expect that you can make such beauty from our source data. Designer Maria Krasnova creatively approached the process and fulfilled the project flawlessly, in my opinion. Also liked Valentine's work. Reacted to my requests, and more importantly, all the remarks of the husband promptly and adequately. We could not find a general concept with him, but thanks to your work everything turned out. Thank you. Successes in further work.

What can I improve?: I liked everything. Just need to be ready to be ready for working together and understand what to strive for.

7 out of 7)

"Apparently there was a queue and I waited a long time"

The sketches were beautiful. Architectural solutions are beautiful. For a long time, the details and color were collected. At my request did a lot of alterations. All liked it.

What can I improve?: Apparently there was a queue and I waited a long time for the readiness of the album itself (second home).

★★★★★★★ completely satisfied ( 7 out of 7)

"The main time was devoted to the study"

Oksana Vatava worked with us. We immediately found a common language, the work was fast and interesting. Oksana very accurately understood all our wishes and immediately offered the option that everyone liked. Thus, the main time of work was devoted to the work of the decor details. We are very pleased with the result.

What can I improve?: And we liked everything :-)

★★★★★★★ completely satisfied ( 7 out of 7)

"I learned every little thing"

Mary Krasnova worked on the facade of our house. We stayed very satisfied with her work! She quickly understood the task that we put it in front of her. Creative to the solution for the design of the facade. I took into account every little thing. There was going to meet our wishes. Work performed clearly and on time. Maria is an excellent professional and easy to communicate people, which is important for cooperation. We recommend everyone!

★★★★★★★ completely satisfied ( 7 out of 7)

"You are all very professional team"

We want to thank everyone who worked on our project (Townhouse in Ejk Eden), namely Alexey Vatava, Elena Nekrasov, Alexander Fomenko, Vasily Shestakova and Dmitry Makarenko, you are a very professional team! Elena very accurately felt all our wishes and was incredibly patient to the whims of the spouse)) Thank you!

7 out of 7)

"Unlimited patience and responsible attitude to work"

After the box of the house from the blocks was already built, it turned out that we and my husband did not have a single understanding of how the facade of the house should be finished. Looking at a sufficient amount of different bricks, including imported, as well as already built houses, finally understood that it was simply to bind brick, even even expensive (as the majority of developers do), we categorically do not want. Therefore, we decided to appeal to designers. Design Citizal chose from several firms that I found Yandex (or Google, I don't remember now) because I liked the gallery of work, and the site itself is made very vividly.

I want to express great thanks to Mary Kryonova for her limitless patience and responsible attitude to work. Not to mention her talent of the designer and the artist. For all the time of work, I never felt even a hint of displeasure to my endless whims. I repent, I could not decide for a long time, in which option to stay, I asked to add something many times, then return it back, etc. In this sense, I have a harmful customer. But in the end we got more than the design. The solutions that Maria proposed, hid architectural disadvantages (such as windows at different levels). And also solved the problem of placement of boxes under rolled blinds. As a result, the appearance of the house turned out to be original and at the same time rational, without excesses. Once again, thank you very much from our big family to the whole team design Capital!

What can I improve?: It turned out tightened, and not always in my fault - at times someone from your employees who worked with my project went on vacation, and had to wait. For me it was non-sharply, and for someone from your future customers may be important.

★★★★★★★ completely satisfied ( 7 out of 7)

"Immediately began work"

Very prompt. I arrived, a pretty girl Valentina Makhov, very carefully listened to my stormy fantasy stream, looked and measured the object, completely clearly explained the procedure with all terms and possible deviations. We concluded a contract, work immediately began, unfortunately, I don't quite understand who was doing what was done, but I contacted only Valentina and Maria, the girls performed their work clearly, fully, observing all the terms, prices, prices and nuances of change. I sooooo liked the result of their work. I really liked what he heard me (now it's rather an exception). Until I finish all my repair workI will communicate only with you. Thank you very much.

★★★★★★★ completely satisfied ( 7 out of 7)

We appealed to the design capital with a difficult task: the facade of the house was to remake, taking into account the existing buildings on the plot, fence, gate. The architect who worked with us suggested several options for the design of the facade, we stopped on one of them. I really liked working with the company, everything was felt professionalism and attentive attitude towards the client. I say, because there is something to compare with. I will definitely recommend design capital to loved ones and friends.

★★★★★★★ completely satisfied ( 7 out of 7)

"I am very pleased with the work of your company"

Everything happened in working order, quickly quickly, all the wishes and comments were carried out in a timely manner and quite quickly was mutual understanding. The result was not forced to wait, I am very pleased with the work of your company. Without your help facade at home, and as a result, the house itself, I would have lost much.

What can I improve?: Maybe real communication would lead to a more rapid result, since words cannot be explained, in particular, its vision of individual parts of the project and the whole project as a whole.

★★★★★★★ completely satisfied ( 7 out of 7)

"Everything happened to joint efforts"

Everything was not just not just, but everything turned out to be joint efforts! For me, the main thing is the end result, I received it. Thank you! Good luck!

What can I improve?: It is necessary to be brave, more offering unusual options.

★★★★★★★ completely satisfied ( 7 out of 7)

"Received many specific professional recommendations"

Very satisfied with the result of work! Designer Elena was able to delve into the essence of my wishes and embody it in the project at the highest level of professionalism. I really liked the fact that the designer did not try to impose his opinion, but tried to understand what I want. As a result, Elena was remarkably managed. Plus, I got a lot of specific professional recommendations to detail. As a result, it turned out a wonderful, unique and original design of facades design.

★★★★★★★ completely satisfied ( 7 out of 7)

"It remained completely satisfied"

Qualified personnel taking into account all the wishes of their client. Works were performed on time. It remained completely satisfied with the result obtained! Thank you so much!

★★★★★★★ completely satisfied ( 7 out of 7)

"Deficious taste, bold solutions, high efficiency"

Extremely professional work! Deficious taste, bold solutions, high efficiency, constant accessibility of communication and a completely real price - this is not the complete characteristics of the company. The result - the neighbors opened the mouths and went crazy from delight! Thank you guys, especially Oksana!

★★★★★★★ completely satisfied ( 7 out of 7)

"They answered all our questions and dispel doubts"

Our work with DesignCapital began at the moment when we could not achieve the desired facade design results on their own. The company positions itself as a project with a narrow specialization, which immediately seemed to us interesting and suggesting success. Before starting work, the company's employees quickly and fully respond to all our questions and dispel doubts, after which short term We started design. The first sketches hit the target and we were able to quickly choose the direction of study. For three weeks, we often came to the desired result and a month after the start of work, they received a ready-made album to implement the object at the facility. From working with experts, I have a feeling of high professionalism and aims. I will definitely recommend the company to my friends and acquaintances.

"It was exactly the house I wanted to see"

I thank Ltd. Design Capital for the perfectly made project of the facade of my house. House for 13 years. It was an unclear desire to improve, lacked style. I was lucky, I worked with Valentina Makhova, a very talented, cute girl. She asked nothing to talk about my wishes, see what she would draw, and then discuss. A few days later she sent a project, and nothing had to be discussed. I gladly accepted everything without additions - it was exactly the house I wanted to see.

"I liked working with this firm"

I liked working with this firm. Nowadays it is hard to find a good contractor who is conscientious to his work and promises. The guys did everything at the highest level, the shortcomings and comments were eliminated instantly. We are pleased with the ultimate work with my wife! On the question of the recommendation of this company to friends, would answer in the affirmative.

"Very pleased with the selection of materials for finishing"

I want to say a huge thank you for quality work and pleasant communication. All our numerous and controversial wishes were taken into account, justified recommendations on making constructive changes to the architecture of the house. The project of the house was still in development, but all the changes that were introduced in AP were promptly taken into account in the development of the project of facades. Very pleased with the selection of materials for decoration, because In addition to constructive featureswas taken into account and price point. Visualization above all silence. Currently, the house is at the stage of developing work documentation. He is like the long-awaited kid, whose birth is waiting for the whole of our family.

"I am sure, we will still cooperate"

It's nice to work with business people who appreciate your time, they say a little, but work well. It was sincerely surprised how quickly we felt our style, then it remained to polish it - and this is after the first departure to the object. Work to victorious is not beautiful words, and really working scheme, Alexey patiently and quickly contributed changes and offered options. Well done! I wish you success in creativity and business, I am sure, we will still cooperate.

"I was unusually pleasant and happily working with you"

Many thanks to your team for the highest professionalism, creativity and customer focus. You have implemented my dream of my dream about the house with a capital letter. You know how to hear what the customer puts out in his thoughts, but himself may not even realize his "Wishlist". I was unusually pleasant and happily working with you. And now, when my friends, knowing how I am going with the previous projectors, are interested in who made the project, I gladly inform: "Design Capital". The best advertising is a job made with love for your profession. You are great! And your attitude to the customer simply bribes.

The finish of the facade of a private house is thought out by its owner and designer at the design stage. As the building is the main element of the landscape, then it is necessary to use the most modern materials that are highly resistant to the decoration of its walls. external factors. Creating a sketch of future housing, you need to well think through its color gamut. To do this, you can explore the photo of various buildings made in the courtyards of friends and acquaintances. This will make the choice of optimal option Facade finishes. Facing the house is not only its peculiar business card, but also primary protection against environmental influences.

Facade Finishing Requirements

The modern building market offers a huge variety of materials for finishing outdoor walls. It's pretty easy to get confused in such a variety. But to the choice of the method of finishing the facade, it is necessary to fit weigly and thoughtfully. Do not chase the cheapest products or materials that are easy to work. It should be remembered that the finishing of the facade of a private house must fulfill its purpose over the years, while maintaining its beauty and presentability.

Facing the facade should have such practical properties:

1. Waterproof. This is the main quality that affects the life of the construction and comfort of living in it;
2. Strength. Finishing materials for facades need to be acquired so that they can withstand strong blows produced by people or falling objects;
3. Heat insulation. The well-thought-out finish of the facade of a private house will protect the room from the cold in winter and will keep the coolness in the summer heat;
4. Hygienicity. Finishing materials should be resistant to fungus, mold and rotting.

Some materials for the facade of a private house practically do not miss the sound. This factor must be taken into account if the house stands on a noisy street with a lively car movement. Silence and peace in rooms are necessary and adults and children.

There are various finishes external walls residential buildings. The choice depends on the conditions for their operation, the environment and the material possibilities of real estate owners. Consider the features of the main materials that are used for facing facades of private houses.

Decorative plaster

Modern building mixes based on plaster and cement are the most common material for finishing a residential building built from brick and foam blocks. To increase thermal insulation qualities, various fillers and plasticizers are added to the mixture. Facade plaster is smooth and textured. Based on this, the methods of applied to the carrier surface differ. The addition of different dyes into the solution allows you to give the walls any color and shade.

Main advantages facade plaster For facing country houses such:

• water resistance;
• aesthetics;
• resistance to low and high temperatures;
• simplicity of applying on the walls;
• non-hatching.

For the facade of the house, mineral, silicate and acrylic plaster are used. Defined minuses of these materials is the complex technology for the preparation of the carrier surface and low resistance to mechanical effects.

Clinker tile

Clinker tiles are made of natural materials. It can be a smooth or textural, imitating surface of natural stone.

The main advantages of clinker bricks are:

1. High strength. Clinker withstands the most extreme mechanical effects without losing its aesthetic characteristics.
2. Easy to maintain. The surface of the tile can be washed with any washing agents and solvents.
3. Variety of colors and textures. To finish the house, clinker laying options can be selected the most unusual and original.
4. Durability. When compliance with the laying technology, clinker tiles can be stopped several decades. In case of damage to individual fragments, they are easy to replace with new ones.

The disadvantages of this material include its high cost and complexity in laying.

Facade panels

Facade panels for outdoor decoration Houses are distinguished by a solid list of advantages. Today, the release of these products in the widest range is established. In addition to purely ornamental functions, the front panels for the outer decoration of the house perform tasks for insulation and waterproofing of the structure. As a rule, the panels are installed in the system of ventilated facades. This allows you to create a solid and aesthetic surface without a preliminary and expensive repair of the walls of the house. Installation facade panels performed on the frame from wooden bar or steel profile.

The most popular material for holding buildings is a sandwich panel. They are products consisting of insulation, located between two sheets of metal or plastic.

The advantages of the sandwich panels are as follows:

• ease;
• ease of work;
• resistance to corrosion, mold and rotting;
• low thermal conductivity;
• long service life;
• waterproof.

The damaged panel can be quickly and easily replaced. Despite the fact that the cost of products is quite high, this minus is compensated for by the absence of the need to use solutions and dyes.

Ceramographic

Porcelain stoneware is a modern finishing material created from polymeric raw materials. The use of various dyes and fillers allows designers to create porcelain tiles and blocks with a variety of pattern and color. Porcelain stoneware imitates such materials such as natural stone (basalt, marble, granite) and natural wood. Physical properties This material is quite high.

It is distinguished by such advantages:

• high strength;
• long service life;
• waterproof;
• resistance to solar radiation;
• immunity to fungus and mold.

The main advantage of porcelain stoneware tile is its homogeneity throughout the volume. So, chips and scratches do not disturb the integrity of its surface. They are easily grinding and polished, after which the surface acquires the original presentation.

Building decoration with a porcelain stoneware has its own characteristics. If it is attached directly to the wall, then it is necessary to use a special synthetic glue. Another way of facing the facade is the mounting tile on metal carcassEquipped with special clips.

Siding

As a rule, decorative panels are used to arrange residential buildings. They are made of metal or polymer plastic. The most practical siding, made of polyvinyl chloride. Installation of panels is carried out on a wooden or steel frame.

Since siding does not give complete sealing, it is recommended to use material resistant to humidity as insulation. In addition, PVC panels have a fairly high thermal expansion coefficient. To prevent the deformation or destruction of the surface of the siding with strong temperature drops, a sliding type of fastening panels to the frame is used.

The advantages of facing panels are:

• high aesthetic qualities;
• sufficient strength to withstand strong blows and pressure;
• affordable cost;
• simplicity and high installation speed;
• long service life.

The panels are quite realistic imitate natural wood, natural stone, brick or decorative plaster.

Photo Gallery

We provide your attention a successful selection of 27 photo-ideas of finishing the facade of a private house.

When there is a need to repair facades at home, modern man Most often begins to think about the better to strip the house outside. And such a simple option, as plastering facades, is rarely taken into account.

Meanwhile, not so long ago, almost all the facades of the houses were decorated with plaster, since there were simply no other materials. And, I must say, she perfectly satisfied all the requirements for the outer coating of the house.

Among such requirements:

• stiffness - plaster well withstands a variety of mechanical exposure;
• waterproof - layer of plaster perfectly protects the walls from atmospheric moisture;
• temperature stability - quality, very important for districts with a large difference in winter and summer temperatures;
• parry permeability - air and moisture circulating through the layer contribute to the fact that the material retains its source structure for a long time;
• sound I. heat insulating properties - Protect the building from the penetration of cold and noise;
• simplicity of application;
• a wide selection of textures and colors of modern plasters allows you to originally arrange the facades of the house;
• the cost of materials and work on finishing the house by plaster.

Thus, the finishing of facades by plaster is quite modern and at the same time budget option their design.

If we talk about the appointment, you can select two types of plasters:

• Repair - its main task is to align the surfaces of the walls and prepare them for further finishes. The thickness of such a plaster layer can reach 50 mm.
• Decorative - creates a protective layer and gives individuality facades. Usually applied with a thin layer.

As part of any plaster composition, there are components such as:

• binder;
• filler;
• modifying additives.

The plaster mix can be cooked independently or purchased in the store ready (it is necessary to add only water to it).

Ready-made mixes are more expensive, but it is much easier to simplify work and save time.

Deciding to separate the facades of his house with the help of plaster, you need to choose the right plaster, because the durability and quality of the decoration depend on it.

Depending on the type of binder, all plaster can be divided into the following types:

• mineral;
• silicate;
• acrylic;
• silicone.

Each view has its advantages, disadvantages and purpose.

Mineral Plaster Used most often. Cement or lime can act as a binder here (and sometimes both), the filler is sand or mineral crumb. Sometimes additives affecting the water absorption of the mixture are introduced into the composition.

The pluses of the mineral mixture are vapor permeability, low cost, simplicity of application. Such plaster allows you to improve the heat insulating properties of the outer walls. By minuses include low elasticity and low durability.

As a result of mechanical impacts or sediment of the building, the plaster layer can be covered with cracks.

It has high plasticity, resistance to cracking, vapor permeability, durability. The facades decorated with such plaster repulse dust, water and easily cleaned.

The prepared solution has high elasticity and is perfectly distributed over the surface, which contributes to its economical flow rate. The use of silicate plaster must necessarily be preceded by priming the walls of silicate primer.

The disadvantages include the fact that the silicate composition dries quickly, so the time for correcting errors in the work is practically no remaining. Therefore, this type of plaster should not use those people who do not have experience with it.

Silicate mixtures are recommended to be applied to the walls of such porous materials as a gas-silicate brick and aerated concrete. Also, the composition has good adhesion to such materials as cement plaster and concrete.

Acrylic plaster It is a composition containing high molecular weight polymers. Their properties allow you to widely apply the mixture data to perform facade works.

The advantages of acrylic compositions are:

• durability (about 20 years);
• resistance to deformities;
• low water absorption that allows you to use mixtures in areas with plenty of precipitation;
• elasticity.

In the outlets, the mixture is presented in the ready-to-use form and do not even require water dilution. If you speak and price, then these mixtures are quite expensive.

There are some "contraindications" to the use of similar plasters: due to low vapor permeability, they cannot be used on facades, pre-insulated mineral wool, during operation of which important condition It is a good ventilating layer of the insulation.

But the foam is perfectly preserved under the layer of polymer plaster.

Produced based on silicone resins. The filler serves fine-grained sand, which gives the facade view natural stone. These plasters are famous for a wide variety of colors and easily with pigments.

The advantages of silicone mixtures are:

• excellent adhesion;
• vapor permeability, providing natural ventilation of walls;
• high elasticity - even when the house shrinkage, the finishing layer will remain whole;
• antistatic properties;
• good resistance to absorbing dirt and salts;
• easy cleaning of plastered surfaces.

Silicone mixtures are sold in finished form and belong to the most expensive.

The texture of plaster is in no way reflected on its durability or strength and is an exceptionally aesthetic parameter. To create a textured layer, fillers with various grain sizes are often used.

All textures are divided into:

• traditional from the depth of invoice up to 5 mm - they can be performed as ordinary and modern mixtures;
• modern - require us only modern materials.

Not only filler is used to create an invoice, but also various tools: glades, grates, sponges, textured rollers.

With their help, you can give the surface almost any relief. But there are technically standard textures that can be created by special modern plaster mixtures: Cameshkovaya; mosaic; Coroede. Cameshki texture is universal and is a surface covered with a crumb size 1-3 mm. With it, it is possible to decorate the facades with patterns, carved patterns, shallow depth bas-reliefs.

To perform this texture, a plastic grater is used and any tools that allow the surface of the relief. As a result, a small-baked surface is obtained.

Mosaic texture is a flat transparent surface, in the thickness of which granules made from one or more natural rocks of high strength are clearly visible. Such plaster is the most stronger and, according to most people, the most attractive.

Silicate and silicone binders used to create such plaster are transparent and therefore stone crumb shifts from all sides. Such facades do not paint and do not lacquer, while maintaining the natural view of natural stone.

Coroede - a very common and popular decorative texture performed in different options: vertical coroede; horizontal; cross; circular.

To create such an invoice, modern plaster is used - a croroede. It is applied to the facade on the thickness of the grain, and then rub in a grater in a certain direction.

You can fly the facades at home alone using standard plastering tools. But to create an invoice you will need special skills that can be purchased only in practice.

Standard procedure for finishing facades of plaster.

• Preparation of walls. If the walls are new, then they need to be simply cleansed from dust and dirt. If the facade is repaired, you will have to pre-remove the old coating from it and clean the walls. All irregularities need to be seal. At the same time, work is better to lead in the warm season when the weather is dry and the temperature ranges from +5 to +27 degrees. In hot weather, the plaster will quickly evaporate water, which can lead to her cracking.
• The second stage is to create a reinforcing layer. To do this, you need to dissolve glue, insisted it for no more than 10 minutes and go to the surface with a special fiberglass. When everything is dry, you need to apply a layer of primer from above.
• Next you need to dissolve plaster, strictly observing the proportions indicated on its packaging.
• Next apply the first layer of plaster - spray. It should be thin and fairly smooth.
• After the spray is dry, the finest layer of plaster scale is applied - soil. The thickness of each layer should not exceed 40 mm - the thickness of the plaster, the more harder and the greater the probability of its detachment.
• The last step is to apply the crossbar - for it, the solution is prepared more liquid. This is the thinnest layer.
• While the coverage has not yet dried, the surface grouts is grated. If you decide to create texture on the surface of the facade, then this should be done at this stage using a special tool.

There are some rules for plastering facades, tested on experience:

• The finishing of facades of the plaster is made only after the building is finally settled.
• Do not proceed to the trim of the facade until all the stone will be finished.
• If you need to stack the complex geometric structures, it is better to attract specialists.
• Do not buy the cheapest plaster mixes - choose good quality products from reliable manufacturers.
• If there is a need for additional insulation of outer walls, then you can add a piled slag to the plaster mixture or other similar material. Thus, you will achieve two goals at once - separate the facade and improve the microclimate at home.
• By purchasing a mixture for the facade, carefully examine its compatibility with the material of the walls of your home.

Thus, the plaster is precisely the material that allows you to implement almost any designer ideasBy combining the process of decorating a house with its protection against adverse environmental factors.

Stock Foto Design of plaster facade

From the point of view of professionals, the facade of a private house is its architectural robe, that is, the so-called its outer shell, on which the first impression does not only depend on the building, but also about its owner. An indisputable fact is that the style chosen to finish the building exterior often reflects not only the favorite color palette of the owner, but also its taste preferences, and in some cases lifestyle. However, at the stage of drawing up the design of the project of the facade of the house, it is important to determine the choice of finishing materials that should not only be attractive externally, but also as functional as possible. The materials used should be resistant to corrosion damage, moisture, sharp temperature differences and the effects of ultraviolet rays, and should also have high insulation characteristics and absolute non-substitution. How to properly pick up the style for the design of the facade of a private house, as well as how to choose suitable finishing materials as part of a particular stylistic solution - read in this article.

Design of the facade of a private house: what needs to be considered?

In the process of choosing a stylistic solution for the facade, it is important to take into account climatic features Zones in which the construction is located, as well as its territorial specificity. Features of the finish nearby buildings are no less important, since from how you make your own ownership will depend on whether you are rolling with the surrounding buildings or stand out for a bright spot. Choosing the design style, you must not forget that modern design alien any specific canons, in connection with which the buildings decorated in last year, successfully combine two or more stylistic directions.

On the design of the facade of the building, as well as the human face, the generally accepted laws of "Make-APA" are distributed, which says that when privately decorative decoration Any building may change almost unrecognizable. In this regard, in the process of facing the facade and the development of the design of the project of its design, it is important to take into account any, even the most minor item.

Basic Facade Design Rules:

• Psychological perception of the building depends entirely on the selected color defining a certain mood;
• To deprive the walls of flat monotonality, it is important to choose the right texture of the material for the design of the facade, which will give the building some structurality;
• As for the overall stylistic concept of the house, it depends on the thoughtful combination of the previous two design components.

Design facade house photo

Material selection: practical basis questions

Knowing all the subtleties of the design is certainly important, however, the practical side of the question, namely the choice of materials for finishing the facade, has an equally important role. So, the following materials can be selected for facing the facade of the building:

• Facade plaster, which can be mineral, acrylic, silicone and silicate;
• Tile or stone;
• Siding;
• In addition, the facade can be decorated with brick masonry.

Each of these options is characterized by its own characteristics, as well as advantages and disadvantages, which will briefly be considered further.

Stucco: Material Features

The facade, lined with plaster, is called wet, as the "wet" technologies are used in the process of its finish. The modern building market offers several types of plastering compositions used for lining of the outer wall.

Mineral Plastercharacterized by minimal cost, but at the same time the lowest plasticity and durability, which often makes it refuse to use it. Although, according to many specialists, this is not considered a significant disadvantage of such plaster, especially in combination with low cost and environmental cleanliness of the components used. The use of mineral plaster is relevant under the condition of decoration of walls made of "breathable" materials and insulated mineral wool or basalt plates. In addition, experts do not recommend using mineral plaster for finishing houses located near the motorway, since vibration, one way or another transmitted to the walls, will contribute to the premature formation of cracks;

Acrylic plasterwhich is characteristic of the highest plasticity and moisture resistance, however the features of the material cause formation on the treated surface of the film, which prevents "breathing" and evaporation of moisture. However, in the case of finishing walls, insulated by Polyenopolster, and houses located near the motorway, it is more advantageous than the disadvantage;

Silicate plaster It was able to become a material that entered the set of advantages: high plasticity, breathability and antistatic properties, thanks to which it does not attract dust particles. Taking into account the long operational period, this type of plaster is one of the most expensive, both at the cost of the material and the cost of installation work;

Silicone plaster, combining all the advantages of previous types, has become a hit among all the proposed species of plaster. However, despite the fact that it has the most successful combination of properties of all the presented types of plaster, it is characterized by more than a democratic cost.

Siding: characteristics of the main varieties

Distinguish the following siding varieties:

• Polyvinyl chrome siding;
• Wooden siding;
• Metal siding.

If use wooden siding, inspireing confidence not only to the house, but also to his owner, there is no one-century, then vinyl siding throughout its relatively short-term operation, and could not fully convince developers in its environmental safety. And such distrust, by the way, is completely not justified. Explain why.

• The use of vinyl siding contributes to the formation of a protective, high-quality ventilated screen, which does not interfere with the "breathing" of the walls and contributes to the removal of excess moisture;
• Vinyl siding is a direct obstacle before exposure to direct solar radiation, and is also easily clean and a long time saves its original look;
• PVC features allow the material not to support the burning, however, if the fire happened, the allocation of harmful substances by siding at the time of burning in the case of its location outside does not affect the atmosphere inside the building.

Wooden siding

Despite the fact that the durability of some varieties of wood leaves much to be desired, this does not affect the durability of the material, since it is made of impregnated wood (treated with a ferry under pressure). Such material is characterized not only by durability, but also resistant to unfavorable factors.

Facade trim Tile: What to pay attention to?

Despite the fact that this method of finishing the facade is very simple in design, it is far from sucking and is characterized by the need for a clear observance of all technological rules of installation.

• It is important to know that the walls of the masonry are characterized by the original shrinkage;
• The existence of a large number of tile types causes the use of various types of glue suitable for one or another type;
• There are a large number of types of tiles imitating various materials, for example, chopped stone or brick. If you prefer these varieties, do not neglect the possibility of choosing a color solution for a clutter composition, which allows you to add an additional parade to the appearance of the facade.
• You also get the opportunity to combine various textures, however it is important to take into account their size. For example, to make a building of massiveness, stability and monumentality, the largest elements are used for cladding the base, while the walls are lined with smaller items.

Finish facade brick

The brick has long been the incarnation of goodness, and with the advent of clinker bricks - also respectability. Since the facing of the brick is carried out at the stage of the construction of the walls, the appearance of the architectural building is already calculated by the Master. However, there are also such moments when the building is already built, but its unprepacent appearance makes it resort to the use of bricks. When it's possible?

It is advisable if you plan to equip the ventilated facade, namely leave the vent hole and air gap. Otherwise, the destruction of wood will accelerate, since condensate will be formed on the inner surface.

Design facade of a country house: how to determine the stylization?

Since the design of the facade is a creative process, in the process of which each owner of a country house should effectively measure its capabilities with flight of fantasy, it is important to find a golden middle one, so that you can create the facade of your dreams. There are several stylistic solutions for finishing the facade of the house:

• Classic stylistic solutions;
• Country style;
• Styles in which English and Canadian motives are traced;
• Construction in the style of modern and high-tech;
• And finally, the style of chalets.

Classic in the design of the facade of a country house

The popularity of the classics when finishing the facade of the private house is still extremely high. A distinctive feature houses whose facades are decorated in classic styleare clear proportional forms and symmetrical geometry of absolutely all elements of the facade. A distinctive feature of the design of windows and doors is rectangular forms or availability decorative arches. Among other directions, the classic is characterized by simplicity, refinement and unassumature. The absence of unnecessary parts allows not distracting a view from the exquisite simplicity of the facade of a private house. Despite the fact that in the classic style, the desire for minimalism is clearly traced, it is impossible to neglect the elements testifying to the high status of the home owner, such as rich massive railing, columns and other decorative details.

Country style: varieties and their features

Country style is a whole flow that includes many styles with those or other features. The national style of the Russian village, and the French Provence, and the Cowboy Wild West, and the style of the chalet spread in the Alps applies to Country Style. That is, the country is a multinational style in which the usuals of a particular country are embodied. As part of the country style are used natural materials - Stone and tree. Despite the fact that the stone can be artificial, the use of modern technologies allows it to make it almost indistinguishable from natural. This style will be most preferable for country houses located near forests or mountains.

The French Provence, which is part of the country style, in contrast to the traditional country, with warm shades, is distinguished by the desire for cold, restrained colors. The favorite of this stylist is white. However, on economic considerations, the finishing of the Provence building can be quite expensive, which often makes it disconnect from its use. Modern designers offer a more rational way to finish the Provence building. Such a design of the facade of the Provence House of Provence assumes a mixture of modern finishing materials, for example, a cladding of the building with sandwich-panels or siding, leaving only the base, which will be subsequently decorated with a good natural stone characteristic of Provence style. Stone facing, characterized by warm shades, perfectly fit into the surrounding environment and local landscape.

A distinctive feature french Provence There are snow-white windows divided into several sections, as well as the use of light shades for decorating balconies and frontones of buildings.

Initially arising for the cladding of housing shepherds, the style of the chalet also at the peak of popularity. However, the use of natural wood and stone does not allow us to say that this type of finish is in the average price category. As a kind of country style, it is a style with oriental roots, which, one way or another, are traced in its appearance. Especially the presence of Eastern roots produces simplicity of the roof and the overall simplicity of finishing.

Houses with features of minimalism and industrialism

Small houses located in the city feature are characterized by a distinct trend towards the exterior industrialization. Among the designers and owners of houses are now at the peak of popularity minimalistic styles, in which a distinct burden to stylistic solutions of high-tech style is traced. The main concept of buildings decorated in such a style is the clarity and laying of forms, as well as the simplicity of design.

High-tech, which made the trends in all modern destinations, primarily characterized by convenience and functionality. When finishing the facade of the building use glass, metal and plastic. The severity and unpretentiousness of the design is complemented. color gamut - Here is more white, black and steel.

But about the modern one cannot say that he is discreet. It does not suit symmetry and is characterized by the predominance of the most unexpected shades, the contrasting combination of which allows you to imitate the natural riot of paints with accuracy.

Design project facade at home: how to do yourself?

• The first stage of the design of the project involves the development of a sketch, which, in the case of the presence of the appropriate skills, you can do or seek help from a specialist to whom you can express your most bold wishes, whether it is a house design in a classic or modern style.
• In the second stage, the design of the facade is carried out. If your home is already built, it is necessary to make it measurements and visualize the selected stylistic direction With the help of computer programs, then prepare the estimate, given the selected materials and types of work. However, in the absence of specialized skills, we do not recommend that you do it yourself, since this stage of creating a project design requires many knowledge relating to regulatory construction, as well as the characteristics of the market for modern finishing materials.

• The next stage design project is decoration. At this stage, you can already with confidence to rely on your strength and skills and fulfill it yourself. In the process of conducting work, it is important to remember that the holistic design of the whole house should not contradict the design of individual details, since in the end everything should be harmoniously combined with each other and be decorated in a single stylistic direction.
• The fourth and final stage of the preparation and development of the project design is design work, in the course of which you can implement all your wishes regarding the design of the facade of the building. It is important to remember that the design of the project design can be carried out not only for the new home, but also for the old one. The only difference in the case of decorating the old house will be the need to alter the old facade, which will significantly complicate the process, but will not affect the final result.

Non-standard designer solutions in the design of the facade of the building

If you want to stand out from the total weight of the houses, we recommend that you use the following ideas that have arisen from those masters who, like you, do not want to merge with a common mass.

Undoubtedly wins the house, the facade of which is decorated with alive flowers. To do this, on the wall of the house, it is necessary to fix aluminum cassettes and install pots with alive flowers, which are able to give the house an attractive and unusual appearance, reviving it;

You can make the walls of the houses at the plaster, and then make them staining to the flag color of your native country or the country in which you live. This decision will make the house much brighter than that painted in monotonous colors;

A modern decision for finishing the facade of the building is its cladding with multi-colored caps from plastic bottleswhich are stuffed to the base of the wall with nails or screws. If your house is wooden, it will be much easier to do this, but in any case the main complexity of this method is to apply to such a huge number of lids. If you collect multicolored caps, you can lay out intricate drawings on the wall;

Another one non-standard decision The facade of the facade of the building will be the use of glass jars, which are laid out like brickwork.

Thus, the embodiment of your dreams in the design of the facade of the building you can produce yourself, but if you are not sure of your forces and skills, refer to the help of specialists who will be able to realize your wishes.