Comments:

Painting the house from the bar outside implies a whole complex of work, which lies in the right choice of paint, surface preparation, and so on. For cutting cut, you can use a wide variety of paints. They can be bright, dark, bright and so on.

However, in most cases, a person is trying to preserve the pristine beauty of the natural tree, so it uses transparent or translucent paints to paint a house from a bar outside. So, as mentioned earlier, it is a rather complicated process. However, in any case, it is best to do with your own hands.

Preparatory process

Often painting at home from the bar is accompanied by very large-scale preparatory work. This is not strange, because if you do not provide all possible nuances, then the likelihood that the work will be made not at the proper level, and this cannot be allowed. That is why it is necessary to prepare in advance, namely, the following nuances take into account.

The paint necessarily needs to be breeding in strict accordance with the instructions. Here you need to take into account all the factors that will affect one or another layer. Special attention in the preparation process should be given to the first layer.

Before the start of work related to the painting house from the bar outside, it is worth spending its surface to remove everything too much that could accumulate between the logs. Otherwise, the places where the dirt or the remains of the chips can quickly change the color.

In case the painting of the house outside is carried out by ordinary brushes, you can apply only two layers of paint. If the kraaspult is used for these purposes, then you can walk 3-4 times one by the same place.

It is also worth remembering that from what tool will be used for painting, directly depends on how the house will look like. If here we are talking about the use of collapse, the surface will necessarily get a glossy, that is, shiny. If an ordinary brush or roller is used when painting, it will be matte.

Before proceeding with painting, the log house must be seized. And this is necessary to do as much as possible. Otherwise, roughness remains on the wall surface, which will then detect themselves during surface harvesting. This should be avoided.

Do not trust the color that takes place on the reference painted plate. In any case, it will be another on the wall. This happens not because manufacturers are cheating their customers, and because the area of \u200b\u200bstaining will be very different from the one that is used as a test. This is not to be afraid, since the shade will not differ much.

By the way, above mentioned some tools. Mostly you will need:

• brushes;
• roller;
• empty tanks;
• kraspopult;
• sandpaper;
• stairs;
• some unnecessary clothing;
• gloves.

If the construction time is delayed, then the likelihood that the log house in different places will have an unequal tonality. In this case, you will have to pre-do the surface color alignment. It is made extremely simple. A chemical bleach is applied to the wall before painting. Only after that the wall should be painted with the selected paint or varnish.

Before painting, it is worth thinking about the fact that after this process neither outside the house, nor from the inside will not smell the fresh smell of the tree. Any paint will instantly destroy this fragrance. And even one layer is quite enough. The only thing that remains is the properties of wood for which people and love wooden houses.

All those tools that can be applied to wood are divided into two large groups - lacquer and flaky. The first option forms a protective film on the surface of the tree, which protects it from external influences. The second type of coating is characterized by a short service life, which is often limited to five years. It also does not create a protective layer on the surface, but penetrates the wood.

Best use varnishes that have acrylic foundation. They have an elastic basis, which in the drying process of the tree will not collapse.

For external work, a wide variety of paints and varnishes can be used. What option to choose? It is worth talking about it in more detail. So, it is worth talking about the main characteristics of the paints, which are used today for painting wooden houses outside.

1. Oil paints. Used very rarely for painting houses outside. They are very sensitive to the effects of ultraviolet rays. They have a negative effect on them. Quickly quickly the surface, which is painted precisely such paint, comes in disrepair, that is, she simply changes its color.
2. Alkyd paints. Poorly suitable for use outside wooden buildings. Here, rather, we can talk about metal or plastered surfaces.
3. Emulsion paints coped well with the water that falls on them. They do not burn out in the sun. They are very similar to adhesive paints, which, over time, washed out with water. It is unacceptable for outdoor painting at home from the bar, so they should not be taken as the basis.
4. Silicate paints, based on liquid glass, are also not used to apply on wooden surfaces. They are most often applied only on plastered, stone or concrete walls. And here we can also be conducted about outdoor use.
5. Water dispersive paint can be used for outdoor painting at home from the bar. By the way, they are very easy to use and allow the surface to be applied to breathe.
6. Acrylic paints are one of the best options that is used to cover the walls outside. They are easily flushed with water until they are completely dried. They are practically not susceptible to the harmful effects of ultraviolet rays. Their durability may envy any other type of paintwork, which is used for the outer painting of walls from the bar.

Any paint has a number of parameters for which it is mandatory to pay attention to when choosing a specific option. For example, a gloss indicator shows how glittering the surface will be. This kind of paint has a number of flaws. All of them show a wide variety of defects on the surface, as well as cracks and focus on roughness.

However, they have one tangible plus. It lies in the fact that there is enough easy to care for a similar surface. It can be wiped with an ordinary cloth, after which it will take.

Some features

Drying speed in various types of paints is not the same. In this case, the paints dry out faster, which are made on volatile solvents and those that have an emulsion base. Longer dry everyone oil paints. If you add sent to any paint, it will dry out much faster than the ordinary standard option.

Another very much an important indicator For any paint, which is used for outdoor painting at home, is light-resistance.

This parameter characterizes how the bright coating will be overwhelmed over time under the action of ultraviolet rays. Very important parameter, if we are talking about outdoor painting at home.

Thus, there is a huge number of a wide variety of paint species, which are used to apply to one or another surface. Best for outdoor work with log fit acrylic paints. They are easily applied, besides, almost in a few moments dry out. A good option for everyone who decided to paint your own home.

It is worth noting that all kinds of paints that are applied to the surface of the house from the bar must be characterized by high resistance to the rays of ultraviolet. It is very detrimental for many types of paints and varnishes.

When painting the surface of the walls, it is mandatory to take into account the set of nuances that allow you to maximize the quality of processing. What exactly should be taken into account was described a little earlier. If you ignore them, then the likelihood is that the coating will be disintegrate and work will have to redo from the very beginning.

Many owners of new houses are puzzled by the question than to paint the house from the bar outside? And this is understandable, because painting the walls of the house from the bar outside - it means to protect the structure from negative external influence and give it a unique appearance. For all types of timber (simple,.) Use the same coatings. The differences between the outer color only in the coating. For the street mainly use impregnation and paints on an oil basis, they are persistent and durable.

In many cases, private developers prefer to preserve the appearance of natural wood, especially if it is the construction of a house from a profiled or glued bar. If the house is built from a simple bar, then cheaper to hide it for the finish than to systematically paint. Before finishing to process.

To protect the timber and giving it the brilliance use paints of two types:

• On a natural basis (oil, water, clay, etc.)
• Synthetic (based on synthetic components).

Paints for the facade of the house from the bar can be classified on:

• Half-timed;
• Matte;
• Semi-man;
• Glossy.

A color scheme

From manufacturers it is better to choose those who are present on the market for more than 10 years. They, usually, not what to spoil their reputation and offer to the buyer a poor-quality coverage (forgery and not to buy fakes and not buy in dubious places). Widely applicable facade paints: "Tykkurila" (facade azure, lustering, crumbling antiseptic), Euro Eco Wood, "Valtti Color Satin", Dufa, Caparol, and others. New paints appear constantly, the main thing is to do everything according to the manufacturer's instructions.

Good paint should provide (in combination with other compositions) a number of moments:

• Preventing water absorption and moisture of other origin;
• Prevent accelerated wood aging;
• Preventing the effects of mold, fungus, insects and other pests;
• Protection against solar radiation, as well as cracking of the tree;
• Additional underscores of the wood structure;
• Providing a presentable appearance;
• Ensuring protection against climatic conditions;
• Ensuring resistance to abrasion and durability of the facade.

TECHNOLOGY Painting Houses from Bruus

Painting the house from the bar outside implies a whole complex of work, which lies in the right choice of paint, surface preparation, and so on.

To work, you will need a tool:

• Grinding machine with the small nozzle for planed timber or with several nozzles for easy.
• Roller, brushes or paintopult.
• Primer - antiseptic.
• Paintwork.
• Brush.
• Empty tanks.
• Gloves and unnecessary work wear (swinging).
• Stairs.

First stage Cleans the facade from dust and dirt. Then gripped. From how qualitatively, the surface will depend on the quality of painting. About how to grind the timber, we have already spoken here. After departure, it is necessary to clean the prepared surface from dust using a brush.

Tip: you can quickly clean the surface with a simple vacuum cleaner with a blowing function.

The second stage The primer is applied. The primer is better to apply in two layers, you need to handle all bends and cracks. The second layer is applied after complete grazing of the first (30-60 minutes).

Third stage A paintwork is applied. Paint outdoor wall need 2-3 layers. How much it dries each will envy on the type of paint. Typically, this time is indicated on the package.

If the color is carried out by a brush, then you need to drive only along the fibers. Cross strokes will be uneven, and the bar is poorly painted. You can paint the walls of the house from the bar with your own hands, but if there are no skills, but the time you need to use the services of professionals.

Overall, the European Facade Coating Method becomes popular. According to this technique, you can take any paint you like, but on top of it must be covered with natural varnish. Thanks to such a double technology, the surface will be smooth, and the varnish will not leave the lip. So the facade will acquire the most attractive appearance.

Cognitive video about painting wooden houses: Errors

One of the most popular materials for finishing inside and outside the room is wooden bar. This material has many positive qualities, such as environmental purity, affordable price, practicality and presentable appearance.

To increase the life of the baouse tree, he needs the most reliable protectionSince otherwise the material will begin to be black and crack. Best option Protect the wooden surface is to paint the timber as outside and inside the house. Paint will become an efficient and simple protection for a rounded or log bar.

Varieties of painting compositions for timber

Before starting painting work, it is recommended to choose color gamut, and type of paintwork material. The paint for profiled or glued timber must be chosen taking into account the climate situation in the region. In addition, in this case it is necessary to consult with a specialist. The main criteria that should be taken into account when choosing a paint material is its resistance to atmospheric or mechanical exposure, the duration of operation and permeability for steam.

Transparent materials

This paint is also called the term. Its feature is that a similar solution does not hide the natural structure of the tree, and on the contrary, emphasizes its beauty. Such transparent paints are perfect for a freshly rounded or log bar, which does not have defects, cracks or dark spots on its surface. Of the transparent materials, such compounds obtained the greatest distribution:

Opaque paints and varnish materials

These compositions are chosen if the design inside or outside the room does not take into account the structure of the wood. Therefore, such paints have a certain color that can be chosen in each specific situation. Opaque formulations are suitable for such situations:

To date, there are several varieties of opaque compositions:

Rules painting Bruus

The main conditions of successful painting is right choice Paints and clear following the rules of work. When choosing paint, it is important to take into account its color so that the painted bar is combined with other elements of the interior or exterior.

Preparatory work

At the preparatory stage, you must first thoroughly clean and dry the treated surface. When working with cuts from glued timber, it should be borne in mind that they are practically not subject to the process of reducing moisture content in the material. Therefore, they are the ideal option For painting. First of all, the primer should be carried out. It is best to use fire resistant and bioprotective composition as a primer composition. In addition, the surface is desirable to carefully treat the antiseptic.

Next is the grinding, which is mandatory preparatory stage Before painting. Competently spent grinding will allow to make the surface smoothly and at the same time will reduce the paint consumption. In addition, such a procedure will allow to increase the depth of penetration of varnish in wood material. As a result, the duration of the operation of the bar will increase significantly. Grinding is recommended to carry out until you installed the doors and windows. This is due to the fact that this stage of work is very dusty. Therefore, the presence of a respirator and goggles for protection is in this case necessary.

Grinding affects the entire surface of the bar, including ends. In some cases, it is necessary to paint a layer of wood covered with fungus. For grinding it is recommended to use grinding devices or sandpaper, having a degree of rigidity in the range of 40-120. At the final grinding stage, polished is carried out. It is carried out by the same tools as grinding work. The only difference is that sandpaper paper with minimal grainy is used for polishing.

Before starting painting the glued or rounded timber, it should also be sealing ends. These areas are much more susceptible to moisture compared to lateral parts.

Therefore, experts advise to handle ends with the help of acrylic sealant. It needs to be done both outside and indoors.

Stage Painting

Painting a profiled or log bar should be carried out at ambient air at least +5 degrees. In addition, it is impossible to paint the timber during precipitation, so the surface of the tree before finishing should be absolutely dry. Otherwise, the method of applying paint on the bar is standard and is carried out with the instructions for a particular paintwork.

Paint quality is the main component of high quality outdoor decoration country house. When this composition is selected, its external characteristics, wear resistance and vapor permeability should be taken into account.

Painting of the walls from the bar acts as an excellent protection of the material and improving its initial natural external data. Such a solution is the most budget and affordable among others. In order for the wood to be terrible external aggressive impact, work must be done correctly.

Painting of the house from the bar consists of the following steps: surface preparation, primer with antiseptics and surface staining.

If you wish to emphasize the aesthetics of the glued bar, then it is better to use olive, wax or oil, but such solutions are not able to protect wood, so they are better used only indoors.

If after painting the room is expected to immediately use, then it is better to apply varnishes performed on water based. There is another alternative - synthetic varnishes that have a resistant smell and not so soon dry. Sometimes the glued timber needs not only in the establishment of its original form, but also in the elimination of small disadvantages in the form of cracks, which can be disguised by applying mastic. It is the one that is made on a wax basis, which is able to give velvety velvet brushes.

Tools and materials

• sealant;
• mastic;
• sandpaper;
• brush, roller or spacing.

External coloring

Painting of walls from a bar is the creation of a barrier between the material and the environment.

Synthetic brushes for painting bars are better kept form and do not leave the veins.

Painted coatings intended for glued timber can have a transparent or matte texture. The first variant of the compositions is called lesing, the second - crumbling. The process of painting using such varnishes can be made by applying one of several tools, including: brush, spray, sprayer or roller.

The range of coatings for the glued timber today is so great that it is extremely difficult to choose the appropriate composition, it is important to initially determine the tasks that must be solved after staining.

Despite the fact that the glued bar is pretty qualitative materialHe needs to protect the moisture, from the penetration of which is capable of protecting the impregnation of the ends of the bar with the help of the sealant, such a procedure is procured by the pores of the wood, which will push moisture. In addition, the glued bar must be protected from mold and fungi. Help in the fight against these pests of wood is capable of antiseptic primer.

Sometimes in front of the hosts, the question arises about the return of the lost external gloss surface of the bar, then decorative staining helps, which involves holding several stages, among them: impregnation, primer, elimination of cracks, staining with varnishes or enamels.

Choosing a paint coating

The bar is grinning with a grinder with a special nozzle.

In order for the facade of the house built from the bar aesthetic and protected from negative factors, the appropriate composition should be selected for staining. Below are the characteristics of coating of different manufacturers that can help when choosing.

Thus, the German manufacturer of Zobel represents the compositions for the bar, which differ in environmental friendliness, are perfectly connected with wood and have a minor cost.

These compositions also choose because they are made on a water basis and do not possess unpleasant odor. After applying, these varnishes have been able to maintain initial color for a long time, however, there are a disadvantage that consists in the need to periodically update coverage every 5 years.

But the compositions of the German manufacturer OSMO, on the contrary, have a very high cost, but they have a lot of additional qualities that deserve attention, among them: ease of application and subsequent elimination if necessary. These paints are made on an oil basis, eco-friendly and are able to keep color well, keeping wood texture.

If you want to save, you can also prefer the lacquer of the Finnish manufacturer Tikkurila, spending with external staining of the bar houses often inexpediently, since most coatings need to be re-updated after 5 years.

The Russian thermal producer represents not such a large assortment for painting the glued bar, moreover, the varnishes of this manufacturer require even more frequent (once every 3 years) updates.

Glued Bruce

If you decide to paint the house, erected from the glued timber, then it is worth knowing that the work should be started with surface grinding, which is needed even for the wood treated in the factory conditions. Easy grinding will save the surface from different dirt and eliminate microcracks. This procedure should also be made when painting a bar inside the house, grinding will make the grip of materials better.

After that, you can proceed to the processing of the ends of the bar of the timeline. Then comes a turn of antiseptics and priming. The primer composition should be allowed to dry, only after that you can move to staining, in the process of which about 3 layers of varnish or paint should be applied. Each subsequent layer must be applied exclusively after drying the previous one.

The surface of the walls in the house after 3 months should be investigated for the presence of new slots, as for the facade of the building, if the painting was conducted outside. If the gaps managed to detect, then re-seal to be done. The sealant should be applied to the place of new cracks. Treatments are subject to both platbands at home.

Starting the house should only be in the warm season, when the minimum temperature is + 5 °. It is impossible to give the house updated appearance and in the period high humidityWhen it comes to snow or rain.

Pricing for Cutting Bruus

If you decide to independently produce dyeing at home, you can use the help of professionals. The cost of work in this case will depend on several factors, including: the amount of work determined by the dimensions of the house; Qualification of the working brigade; The cost of the applied compositions for staining; View of the required work.

If you take into account the average cost of such and related services for staining, you can select the grinding of walls from the glued timber, the price for which will be about 110-160 rubles, but the antiseptication will cost 70-80 rubles per 1 m 2, the staining of the bar in 1 layer It will cost 80-100 rubles for 1 m 2. For the initial cleaning of the pile from the basis of the brigade walls, 30-50 rubles per 1 m 2 will take place. Grinding and sealing of the region of the ends of the bar costs 350-400 rubles for raman meter. If you need to dismantle, paint, and after installing the platbands, the owners will have to pay 150-160 rubles for the temporon meter, balconies, fencing and terraces from the bar are also sometimes required to paint, it costs about 600-800 rubles for a temporon meter.

Protect and give freshness brous house Many owners want, do not save on it, such a structure has an impressive cost and will be operated for a long time. Therefore, a cheap short-lived composition should not be purchased, which is not able to extend the vital activity of wood, because it is more than the other materials being exposed to external influences. If you do not have skills, you may not even be taken for work yourself, you need to use the help of specialists.

Reflecting on how to paint the house from the bar outside, it must be remembered that painting for timber not only decorative element, but also protection against negative impacts of the external environment, ensuring safety and durability.

In painting at home from the bar should be included: antiseptic processing Woods and lacquer coating or paint.

Have vacation home Or Dacha - the dream of many city inhabitants and especially megalopolises. Permanent urban noise, stuffiness, crowds of the people on the streets are very tired and cause a desire to retire in a quiet place, breathe fresh air, chat with nature. Therefore, a comfortable country house is often not just material ownership, but a vital necessity.

Do not everyone may afford the purchase of a finished country house. But the house on the country site can be built with their own hands. This will cost an order of magnitude cheaper, and the result will be exactly what the owner of the future structure is required. Especially if all preliminary actions were made competently, thoroughly, intelligent: selection of the site, the project of the future home, drawing up the estimates, planning construction work, choice of material.

The main thing is to rise in building at home, remember that it will require certain costs of time, labor, cash. Getting Started dacha houseIt is necessary to carefully examine the information about the materials presented in the market, consult with specialists and with those who have already passed on this path.

What is good home from a bar

After the site was chosen, the size and layout of the future home are invented, you need to decide on the choice of material for it. This is the main question. Depending on which the house will be built, the question of the necessary foundation, insulation, etc. is solved.

Currently, a timber is considered one of the most popular materials for country buildings: calibrated, glued or profiled. It is environmentally friendly, relatively inexpensive material with good thermal insulation properties.

Under the construction of the house from the bar does not require laying a massive foundation. The technique will only need to deliver the material to the place of construction. All this significantly reduces the cost of the house and facilitates construction.

In addition to the main house from the bar, you can also build a flaghel, mezzanine, summer kitchen, bath or sauna. For household buildings This material is not used.

The insulation of the walls of the house from the profiled or any other bar is made of natural (moss, palable, etc.) or modern synthetic materials. For the home heating at the cold season, it is best to install an electrical or gas boiler with a steam heating system.

Finish ready home from timber

Proper painting of the house from the bar - very important moment. The decision of this issue should be related to special attention, because it depends not only by the appearance of the construction, but also its preservation and durability. Properly selected coating will protect the house from corrosion, rot, fungus, mold and other factors that reduce its service life. Waterproofing and protection against direct sunlight will also help the preservation of the initial qualities of wood and its natural color.

Basic Rules Painting

Apply an antiseptic on wood is needed with a brush with a rigid natural pile.

The outer painting of the brusade house is carried out in the case when the developer decides to refuse to apply any finishing materials. Before painting a house from a bar with natural humidity, the whole design must be carefully dryed. Paintworks are better at dry surface.

After drying the walls of the cut, they are cleaned from natural pollution and grind carefully. This will increase the quality of painting. Coloring dust is removed with a brush or vacuum cleaner, put on blowing mode.

A primer (antiseptic) is applied to the surface thus prepared. The primer must be applied to all natural or artificial irregularities of timber: bends, cracks, small chips. The primer will usually dry no more than an hour. After that, it must be applied by the second layer.

Only after re-drying the primer composition can be applied paintwork. It is also applied twice or three times. The dryer of each layer should be carried out according to the technical instructions on the package.

Apply finishing materials better with a brush or sprayer. The main thing is to remember that the brush should only move vertically. Paints and varnishes, applied by horizontal movements, fall unevenly, insufficiently crushing the bar and look very inaccurated.

What materials are better to use

Select outdoor decoration wooden house Bruus depends on the construction of the material. A house from a calibrated or profiled timber will be more practical to cover the outside of various finishing materials. In this case, you do not have to constantly update painting. The house from glued bar is better to paint.

Usually the painting of houses from the glued timber is carried out using natural coloring compositions. This contributes to the preservation of the natural type of wood, its environmental qualities, and is also safer for residents at home than, for example, synthetic compounds.

For outdoor painting of the finished brusade house use coloring compositionsMade based on natural materials: clays, oils, water, etc. It should be remembered that painting with synthetic coloring compositions is extremely undesirable.

Facade paints can be matte or semiam, glossy or semi-shy. For timber used:

• acrylates;
• antiseptics;
• oil paints.

Acrylic coloring compositions have high strength, are well applied and do not require constant updates. Their main minus is the high cost.

To work, you will need: roller, brushes, rags and so on.

Antiseptic compositions are manufactured from organic substances, water and various additives. The dried antiseptics protect the painted surface well. The main minus of antiseptic compositions is low stability and long drying after applying.

Oil paints are still considered the most economical and reliable. Their popularity is ensured by high protective properties and low prices. The main disadvantages of oil-based compounds: long drying and exposure of painted burnout surfaces, cracking and small chips.

After applying paint and complete drying of the painted surface, it is also recommended to apply a layer of natural varnish. This will help consolidate the paint and further align the surface, because the varnish, as a rule, falls without incl.

When choosing a specific composition, it is better to give preference to products of well-known manufacturers. Their long-standing presence in the market of sales of this product will be the key to the quality of the goods offered. Reduce your rating by poor product famous manufacturer It is hardly wanting.

Inner painting of a wooden house

Painting timber inside the house - also a very important point finishing work. Painted walls from the bar look much better and become more resistant to the effects of moisture, temperature changes, mechanical damage.

It is better to use special paints for the internal processing of the bar. These compositions have high strength, various colors, stability and long retain a bright and fresh look, providing additional deformation protection.

To emphasize the natural aesthetics of the bar from the inside of the walls using wax, olifes or special oils. Small natural flaws of walls from a bar can be covered with mastic, which will not only help level the walls, but also give them special velvety.

Properly selected and neatly applied paints and varnish materials will protect and decorate the house from the bar. The tastefully decorated interior will give a country house special comfort. This will make such a lodge a great place to relax the owner of the house, his family and friends.