From the point of view of professionals, the facade of a private house is its architectural robe, that is, the so-called its outer shell, on which the first impression does not only depend on the building, but also about its owner. An indisputable fact is that the style chosen to finish the building exterior often reflects not only the favorite color palette of the owner, but also its taste preferences, and in some cases lifestyle. However, at the stage of drawing up the design of the project of the facade of the house, it is important to determine the choice of finishing materials that should not only be attractive externally, but also as functional as possible. The materials used should be resistant to corrosion damage, moisture, sharp temperature differences and the effects of ultraviolet rays, and should also have high insulation characteristics and absolute non-substitution. How to properly pick up the style for the design of the facade of a private house, as well as how to choose suitable finishing materials as part of a particular stylistic solution - read in this article.

Design of the facade of a private house: what needs to be considered?

In the process of selecting a stylistic solution for the facade, it is important to take into account the climatic features of the zone in which the construction is located, as well as its territorial specificity. Features of the finish nearby buildings are no less important, since from how you make your own ownership will depend on whether you are rolling with the surrounding buildings or stand out for a bright spot. Choosing the design style, you must not forget that modern design Alien to any specific canons, in connection with which the buildings decorated in recent years, successfully combine two or more stylistic directions.

On the design of the facade of the building, as well as the human face, the generally accepted laws of "Make-APA" are distributed, which says that when privately decorative decoration Any building may change almost unrecognizable. In this regard, in the process of facing the facade and the development of the design of the project of its design, it is important to take into account any, even the most minor item.

Basic Facade Design Rules:

• Psychological perception of the building depends entirely on the selected color defining a certain mood;
• To deprive the walls of flat monotonality, it is important to choose the right texture of the material for the design of the facade, which will give the building some structurality;
• As for the overall stylistic concept of the house, it depends on the thoughtful combination of the previous two design components.

Design facade house photo

Material selection: practical basis questions

Knowing all the subtleties of the design is certainly important, however, the practical side of the question, namely the choice of materials for finishing the facade, has an equally important role. So, the following materials can be selected for facing the facade of the building:

• Facade plaster, which can be mineral, acrylic, silicone and silicate;
• Tile or stone;
• Siding;
• In addition, the facade can be decorated brick masonry.

Each of these options is characterized by its own characteristics, as well as advantages and disadvantages, which will briefly be considered further.

Stucco: Material Features

The facade, lined with plaster, is called wet, as the "wet" technologies are used in the process of its finish. The modern building market offers several types of plastering compositions used for lining of the outer wall.

Mineral Plastercharacterized by minimal cost, but at the same time the lowest plasticity and durability, which often makes it refuse to use it. Although, according to many specialists, this is not considered a significant disadvantage of such plaster, especially in combination with low cost and environmental cleanliness of the components used. The use of mineral plaster is relevant under the condition of decoration of walls made of "breathable" materials and insulated mineral wool or basalt plates. In addition, experts do not recommend using mineral plaster for finishing houses located near the motorway, since vibration, one way or another transmitted to the walls, will contribute to the premature formation of cracks;

Acrylic plaster which is characteristic of the highest plasticity and moisture resistance, however the features of the material cause formation on the treated surface of the film, which prevents "breathing" and evaporation of moisture. However, in the case of finishing walls, insulated by Polyenopolster, and houses located near the motorway, it is more advantageous than the disadvantage;

Silicate plaster It was able to become a material that entered the set of advantages: high plasticity, breathability and antistatic properties, thanks to which it does not attract dust particles. Taking into account the long operational period, this type of plaster is one of the most expensive, both at the cost of the material and the cost of installation work;

Silicone plaster, combining all the advantages of previous types, has become a hit among all the proposed species of plaster. However, despite the fact that it has the most successful combination of properties of all the presented types of plaster, it is characterized by more than a democratic cost.

Siding: characteristics of the main varieties

Distinguish the following siding varieties:

• Polyvinyl chrome siding;
• Wooden siding;
• Metal siding.

If the use of wooden siding, inspireing confidence not only to the house, but also to his owner, there is no one-century, then vinyl siding throughout its relatively short-term operation, and could not fully convince developers in its environmental safety. And such distrust, by the way, is completely not justified. Explain why.

• The use of vinyl siding contributes to the formation of a protective, high-quality ventilated screen, which does not interfere with the "breathing" of the walls and contributes to the removal of excess moisture;
• Vinyl siding is a direct obstacle before exposure to direct solar radiation, and is also easily clean and a long time saves its original look;
• PVC features allow the material not to support the burning, however, if the fire happened, the allocation of harmful substances by siding at the time of burning in the case of its location outside does not affect the atmosphere inside the building.

Wooden siding

Despite the fact that the durability of some varieties of wood leaves much to be desired, this does not affect the durability of the material, since it is made of impregnated wood (treated with a ferry under pressure). Such material is characterized not only by durability, but also resistant to unfavorable factors.

Facade trim Tile: What to pay attention to?

Despite the fact that this method of finishing the facade is very simple in design, it is far from sucking and is characterized by the need for a clear observance of all technological rules of installation.

• It is important to know that the walls of the masonry are characterized by the original shrinkage;
• The existence of a large number of tile types causes the use of various types of glue suitable for one or another type;
• Exists a large number of types of tiles imitating various materials, for example, chopped stone or brick. If you prefer these varieties, do not neglect the possibility of choice color solving For a clutter composition, which allows you to add an external appearance of the facade an additional parade.
• You also get the opportunity to combine various textures, however it is important to take into account their size. For example, to make a building of massiveness, stability and monumentality, the largest elements are used for cladding the base, while the walls are lined with smaller items.

Finish facade brick

The brick has long been the incarnation of goodness, and with the advent of clinker bricks - also respectability. Since the facing of the brick is carried out at the stage of the construction of the walls, the appearance of the architectural building is already calculated by the Master. However, there are also such moments when the building is already built, but its unprepacent appearance makes it resort to the use of bricks. When it's possible?

It is advisable if you plan to equip the ventilated facade, namely leave the vent hole and air gap. Otherwise, the destruction of wood will accelerate, since condensate will be formed on the inner surface.

Design facade of a country house: how to determine the stylization?

Since the design of the facade is a creative process, in the process of which each owner country house It should effectively move away its capabilities with the flight of fantasy, it is important to find the Golden Middle, so you can create the facade of your dreams. There are several stylistic solutions for finishing the facade of the house:

• Classic stylistic solutions;
• Country style;
• Styles in which English and Canadian motives are traced;
• Construction in the style of modern and high-tech;
• And finally, the style of chalets.

Classic in the design of the facade of a country house

The popularity of the classics when finishing the facade of the private house is still extremely high. A distinctive feature houses whose facades are decorated in classic styleare clear proportional forms and symmetrical geometry of absolutely all elements of the facade. A distinctive feature of the design of windows and doors is rectangular forms or availability decorative arches. Among other directions, the classic is characterized by simplicity, refinement and unassumature. The absence of unnecessary parts allows not distracting a view from the exquisite simplicity of the facade of a private house. Despite the fact that in the classic style, the desire for minimalism is clearly traced, it is impossible to neglect the elements testifying to the high status of the home owner, such as rich massive railing, columns and other decorative details.

Country style: varieties and their features

Country style is a whole flow that includes many styles with those or other features. The national style of the Russian village, and the French Provence, and the Cowboy Wild West, and the style of the chalet spread in the Alps applies to Country Style. That is, the country is a multinational style in which the usuals of a particular country are embodied. As part of the country style are used natural materials - Stone and tree. Despite the fact that the stone can be artificial, use modern technologies Allows it to make almost indistinguishable from natural. This style will be most preferable for country houseslocated near forests or mountains.

The French Provence, which is part of the country style, in contrast to the traditional country, with warm shades, is distinguished by the desire for cold, restrained colors. Favorite of this stylist is white color. However, on economic considerations, the finishing of the Provence building can be quite expensive, which often makes it disconnect from its use. Modern designers offer a more rational way to finish the Provence building. Such a design of the facade of the Provence House of Provence assumes a mixture of modern finishing materials, for example, a cladding of the building with sandwich-panels or siding, leaving only the base, which will be subsequently decorated with a good natural stone characteristic of Provence style. Stone facing, characterized by warm shades, perfectly fit into the surrounding environment and local landscape.

A distinctive feature french Provence There are snow-white windows divided into several sections, as well as the use of light shades for decorating balconies and frontones of buildings.

Initially arising for the cladding of housing shepherds, the style of the chalet also at the peak of popularity. However, the use of natural wood and stone does not allow us to say that this type of finish is in the average price category. As a kind of country style, it is a style with oriental roots, which, one way or another, are traced in its appearance. Especially the presence of Eastern roots produces simplicity of the roof and the overall simplicity of finishing.

Houses with features of minimalism and industrialism

Small houses located in the city feature are characterized by a distinct trend towards the exterior industrialization. Among the designers and owners of houses are now at the peak of popularity minimalistic styles, in which a distinct burden to stylistic solutions of high-tech style is traced. The main concept of buildings decorated in such a style is the clarity and laying of forms, as well as the simplicity of design.

High-tech, which made the trends in all modern destinations, primarily characterized by convenience and functionality. When finishing the facade of the building use glass, metal and plastic. The severity and unpretentiousness of the design is complemented. color gamut - Here is more white, black and steel.

But about the modern one cannot say that he is discreet. It does not suit symmetry and is characterized by the predominance of the most unexpected shades, the contrasting combination of which allows you to imitate the natural riot of paints with accuracy.

Design project facade at home: how to do yourself?

• The first stage of the design of the project involves the development of a sketch, which, in the case of the presence of the appropriate skills, you can do or seek help from a specialist to whom you can express your most bold wishes, whether it is a house design in a classic or modern style.
• In the second stage, the design of the facade is carried out. If your home is already built, it is necessary to make it measurements and visualize the selected stylistic direction using computer programs, and then prepare the estimate, given the selected materials and types of work. However, in the absence of specialized skills, we do not recommend that you do it yourself, since this stage of creating a project design requires many knowledge relating to regulatory construction, as well as the characteristics of the market for modern finishing materials.

• The next stage design project is decoration. At this stage, you can already with confidence to rely on your strength and skills and fulfill it yourself. In the process of conducting work, it is important to remember that the holistic design of the whole house should not contradict the design of individual details, since in the end everything should be harmoniously combined with each other and be decorated in a single stylistic direction.
• The fourth and final stage of the preparation and development of the project design is design work, in the course of which you can implement all your wishes regarding the design of the facade of the building. It is important to remember that the design of the project design can be carried out not only for the new home, but also for the old one. The only difference in the case of decorating the old house will be the need to alter the old facade, which will significantly complicate the process, but will not affect the final result.

Non-standard designer solutions in the design of the facade of the building

If you want to stand out from the total weight of the houses, we recommend that you use the following ideas that have arisen from those masters who, like you, do not want to merge with a common mass.

Undoubtedly wins the house, the facade of which is decorated with alive flowers. To do this, on the wall of the house, it is necessary to fix aluminum cassettes and install pots with alive flowers, which are able to give the house an attractive and unusual appearance, reviving it;

You can make the walls of the houses at the plaster, and then make them staining to the flag color of your native country or the country in which you live. This decision will make the house much brighter than that painted in monotonous colors;

A modern decision for finishing the facade of the building is its cladding with multi-colored caps from plastic bottleswhich are stuffed to the base of the wall with nails or screws. If your house is wooden, it will be much easier to do this, but in any case the main complexity of this method is to apply to such a huge number of lids. If you collect multicolored caps, you can lay out intricate drawings on the wall;

Another non-standard solution of the facade of the building will be the use of glass jars, which are laid out like brickwork.

Thus, the embodiment of your dreams in the design of the facade of the building you can produce yourself, but if you are not sure of your forces and skills, refer to the help of specialists who will be able to realize your wishes.

The stylish design of the walls of the building is the basis of any exterior of the yard. In order to give their own dwelling individuality, you need to carefully think about the design of the facade of the house, develop a project and choose building materials.

Design options

Increasingly, eclectic or "rustic" design options are selected for the design of country houses. Consider the most interesting of them:

1. Alpine style or chalet;
2. Original design;
3. Country;
4. French direction or Provence;
5. Eastern direction;
6. Modern English style.

The most common options for the design of the facade of a private country house in style. This is a very peculiar direction, its feature is a large number of natural materials from which cladding is made. It is predominantly a tree, but it is often complemented by stones or brick masonry. It is withstanding a soft brown or close to it. When creating such a cladding, it is necessary to take into account the presence of a canopy, which is obligatory in such buildings.

Photo - Chalet

Original style is associated with minimalism or popular high tech. it perfect design for one-storey houses From brick, where the facade should not only complement the landscape, but also be part of the exterior of the yard. Most often there are frame structures, providing additional ventilation of the building. The outer layer of decoration can be built of metal, plastic or glass depending on the possibilities and preferences.

Photo - Facade Modern

Materials To cover modern buildings:

1. Siding PVC. Siding is very simple to flicker the facades, in addition, now there are unique plates that not only provide the perfect surface, but further increase the thermal insulation. it best option For a small frame house;
2. Galvanized professional flooring. Another famous and loved by many masters option. The profile is made of cold-rolled rolled steel treated with a variety of polymers and zinc. This increases its strength and durability. Also, the metal base significantly strengthens the walls, protects them from negative impact. ambient and reduces the fire hazard of the building;
3. Wooden siding. For design simple home in classic style with High-tech elements ( big windows and plastic) quite often use various wood coatings. They have nothing to do with natural wooden blocks, but it is practically completely transmitted to both the color and texture of a genuine timber.

In addition to the use of individual overhead facing, the modern uses the plaster of the walls of the core, "fur coat" or mosaic. it great solution For urban, cotter, if you need to combine the availability of processing and beauty of the surface.

Country - Optional design of the facade of the village house under the tree. As follows from the name, it is a fairly light style, the main role is played by wood. Unlike Chalet, Country very rarely combines several coatings, most often it is bars, boards and other wood options.

Photo - Country Style

Modern provence is often called the half-timber. This landscape design It implies a large number of diverse coarse elements in the exterior, but at the same time they skillfully combine with neat and cute details. Facades in particular are complemented by specially treated beams. Earlier, real logs made of wood were used for the facing of the outer coat, but they were too tightened by the foundation, thereby significantly reducing the durability of the building. Now outside the house is covered with a special tile or overhead boards that simulate the present coating.

Photos - Provence or Fakhverk

Building eastern style It is impossible to confuse any other. They are not covered with tiles, bricks or wood, and are processed with light spacure and paint. It helps to create the effect of a smooth glossy surface. Naturally, such a decoration of a residential building immediately issues the defects of the construction (possible cracks or irregularities), so many builders before creating such a direction pre-insulate the house of foams or thermal stilts.

Photo - facade in oriental style

Monumental english style - This is an artificial brick progenitor on the outer surfaces of the building and the fence. As you know, initially in England, the houses were built exclusively from the stone, this material perfectly withstood high humidity and sharp temperature differences. Now, thanks to the presence of a huge number of analogues from such technology, they have been departed, but at home still covered by tradition artificial stone or shrid.

Photo - English finish

This version of the design of the country or two-story private house is rarely used to cover the entire facade, since such a design is very weighting foundation. Most often, the layer of stone is installed on separate parts of the wall. Materials are mainly used:

1. Granite;
2. Marble;
3. Seven;
4. Slate.

Depending on the solution, you can create a very beautiful and original style of your home. But it must be remembered that on average, the stone takes all the construction of 40 tons per 100 square meters.

It should be understood that if it is incorrect to choose the design of the face wall, then you can not only spoil the landscape design, but also contribute to the destruction of the carrier system of the house. Before starting construction, it is necessary to refer to experts in advice. The development of an individual project will take approximately a week and, depending on the complexity, will cost in the amount of 1000 rubles to several tens of thousands (for example, the project of the facade one-storey house In Moscow in the style of a chalet of 120 square meters. meters has the cost of 3,500 rubles). Also, the price depends on the size of the construction and the number of decorative elements.

Photo - House Finishing Project

When creating a technological map and other calculations, the wizard will take into account not only the desired size and color of the decoration, but also its pressure on the foundation, which is very important for houses on piles or pillars.

1. Be sure to calculate the size of the yard before starting work. Many materials do not withstand the effects of water, so it will be necessary to consider the possibility of expanding the roof or porch;
2. To create a beautiful facade of cottages, it is advisable to use durable durable materialsthat do not require care. This is a natural stone and professional flooring;
3. When choosing a coating, consider not only its texture, but also color. In particular, it is important for the house in the style of Provence and Chale, otherwise it may turn out a completely tasteless design;
4. For the arches from the wood, it is best to choose durable and light breeds: pine, larch, Canadian maple;
5. Before starting work, be sure to browse the photo by which you can develop the design of the facade of the house. This will help you take into account many moments and mistakes, likely in the construction process.

Surely all owners of private houses will agree that today, more than ever, it is important than to separate the facade of the house. Faced behind the stunning appearance at home and exclusivity, perhaps it does not make any sense.

In any case, it is important to observe the golden middle and finishing the facade, too, no exception. Without an objective quality assessment, you should not choose budget material. Of course, this work will not be cheap anyway, however, you can choose a material that, with the same characteristics of strength, it will cost much less.

Competent approach to the choice of material

To make a correct decision that will be beneficial with the financial side, it is important to identify the criteria as accurately as possible, detecting both the advantages and disadvantages of one or another finish material.

Pay attention to the ready-made facade. Of course, how pretented the facing is largely depends on your personal preferences, and it means that his own opinion cannot be objective. Consider the following parameters of the materials used:

• Resistance to the emergence of visual defects and color burnout.
• If you think to purchase a simulation product, then compare how similar it is similar to natural raw materials.
• The number of invoices and variations offered.

Facing material must be durable. It will be very unpleasant if a relatively inexpensive facade will need an annual repair work. But, if the material you like has a long service life, then you are on the right track!

It is clear that the facade material is not easy to choose. Having considered the pros and cons of various facing materials, you can understand which material will be more reliable and more durable.

Types of panels for facing facade and their features

There are 2 main types of panels for finishing the facade of the house, namely:

• Sandwich panels.

Polyplan consists of three layers. The top layer is made of varnished aluminum. Externally, it resembles plaster or tree. Polyplane protects the surface of the walls of the house from steam and heat. Polyurethane foam is an internal filling of the panel that provides thermal insulation. The inner layer consists of a doped foil and plays the same role as the first layer. The polyplane is fixed vertically with the help of special lock profiles, called Dolphin. The joints are practically invisible, which protects the walls from falling inside.

Sandwich panels are designed to finish the facade, they also consist of three layers. The upper and lower layer are made of metal sheets, and between them is the insulation. Details are combined with hot pressing. Due to this, the material is distinguished by reliability, durability and durability. As a thermal material in the manufacture of sandwich panels, foam can be used, mineral wool, fiberglass and polyurethane foam.

Choosing insulating material, it is important to consider the coefficient of thermal conductivity, because it is higher, the worse the material holds heat.

This facing material can be smooth, decorative profiled or conventional profiled. Sandwich panel is simple, inexpensive and fast way Facade finishes. A small weight will not have a load on the foundation. Among the disadvantages it is worth noting the vulnerability to the damage to the appearance and freezing at the joints.

Reliable stone

Everyone knows that the stone is the strongest and reliable material, the durability of which can be envied. For cladding, natural and artificial stone can be used. By the way, the latter in appearance and quality is not inferior to its natural analogue with nothing, as evidenced by the photo.

Breed, texture, size and color of the stone - this is a matter of taste and the choice here is just huge. It is worth considering that at home, the facade of which is separated by granite or diorite look termally and strictly. While at home trimmed by travertine or marble looks more naturally and less strictly. Whatever the stone you choose, the facade of the stone will look original. The frost resistance of the material in our country should be in priority, due to the harsh winters, which are in our latitudes.

Natural stone is expensive, and its artificial analogue is much cheaper. The texture, color and shape of artificial stone is the most diverse. The advantages of the material: wear resistance, ease and resistance to corrosion.

Classic plaster

This type of finishing is popular mainly due to the low cost of decorative and cement-sand plaster. In addition, this finishing material allows you to improvise with color, pattern and texture. It increases the isolation of the house and its refractory. The coating dries quickly, not afraid of water and shock. Traditionally, plastering from cement and sand is used for plastering the facade, but along with it also applies decorative (cored, lamb) and facade (acrylic, silicone) plaster.

The cement-sand mixture consists, as is clear from the name, from cement and sand, as well as chemical additives. It copes perfectly with temperature drops and high humidity. Acrylic plaster is the cheapest version of the decorative plaster. She goes well on polystyrene foam, moistureproof. With sharp drops of temperatures, it is likely that it cracks. Silicone plaster is more expensive. It is made of silicone resins. It is not afraid of direct sunlight, moisture-resistant and durable. However, it is worth considering that the result of the work depends largely on the qualification of the plaster. So that the coating always looked presented, it is necessary to care for it.

In a nutshell, characterized as a puff pastry. There is airspace between facing material and insulation. In essence, it is a mounted construction, installed at a certain distance from the wall, which allows to be separated in this way and the facade wooden house.

The ventilated facade passes the air. Moreover, excess moisture is given to the ventilated zone. Ascending air flows are output.

For the ventilated facade, you can use different variants. For example, it can be an aluminum composite sheet having a small weight, or heavy granite stove and other materials. Ventilated facades are characterized by high energy-saving properties. They provide good noise and sound insulation. It is not necessary to separate the walls before mounting the ventilated facade, while the attached elements will hide all their irregularities and defects. If you want modern and inexpensive cladding, cholect the ventilated facade.

Siding is good or bad?

Siding used to finish external walls At home, there are two species - base and vinyl. Aluminum siding is extremely rare in the arrangement of residential buildings. The main advantage of the material is easy installation, safety and easy care. The main disadvantage - externally, the material looks very artificially.

Although siding manufacturers argue that it can serve more than 45 years, in practice it is far from the wrong. In fact, it becomes fragile after frosts, prone to burnout and unstable to deformation. Unfortunately, it is often possible to see that siding after 5 years loses its positive characteristics and becomes externally unattractive.

If you decide to install siding in the cold season, you should consider that it is distinguished by a high thermal expansion.

This is a multi-layer facade design. Each part of it plays an important role. It consists of 3 layers: a basic reinforced layer, thermal insulation and a decorative layer. With the help of the reinforced layer, you can align the curvature of the walls and fix heat insulation material. Initially, the grid is installed on the facade, which is subsequently applied with a glue composition. As thermal insulation, polystyrene foam or mineral wool is most often used.

The decorative layer is made of mineral or silicone plaster. It protects the inner components of the wet facade and externally decorate the house.

See how to glue polystyrene foam:

Facade Finishing Block House

Lining, imitating a rounded log is referred to as a block house. The material is environmentally safe, because it is made of natural materials. A significant drawback is high cost and comparative briefness, it is not refractory. All defects characteristic of wood may well manifest itself on a block house.

Externally, the house, a block house, looks very presentable. If you decide to purchase this material, then make sure that it is sufficiently succeeded, otherwise he can start rot after editing.

Since the block house is made from a natural tree, it must be periodically covered with special protective compositions and open with varnish or paint.

The better you will take care of the facade, a broken house, the longer it will serve you.

Quality and durability of facing bricks

Ceramic lining brick is made of clay by special technology. It is very durable, it is distinguished by good sound insulation, frost resistance and low moisture absorption. Clinker brick is burned at higher temperatures than its fellow from ceramics. The physical characteristics of clinker bricks are also higher than that of ceramic.

The material has a large range of colors, shapes and textures. The only drawback is the possible appearance of heights. But most of its residential buildings decorated with clinker brick look presented for many years. In order not to strengthen the foundation, the facade cladding brick needs to be planned in the process of designing the house.

Advantages and disadvantages of facade tiles

It is not afraid of moisture, it is distinguished by reliability, durability and durability. If the front tile is made high quality, it will provide a presentable appearance at home. If the adhesive solution is selected correctly, the front tile will serve as one decade, without losing the initial properties.

Among the disadvantages of ceramic facade tiles, it is worth noting high fragility before laying, the need for preliminary and very thorough preparation of the surface of the outer walls of the house and the straightforward seam.

In this article, many options for finishing the house, including those finishing materials, which will cost the homeowner relatively inexpensively. The main thing is that your chosen facing for the house pleased your eye is not one decade. If you have questions about the topic, then write comments.

Photo

Estimates 0.

The facade of the house is that his outdoor part, which is the first to see everything who came to you with a visit. From how it looks like, the impression is largely dependent on the guests of the house. By the facade you can judge the status, material well-being and artistic taste of those who live behind him. In addition, he has its own functional tasks. Preferably to design exterior decoration Homes harmonized with the surrounding landscape and corresponded to the style of interior decoration. At the same time, protects the walls and overlappings of the construction from external influences.

That is why it is so important to seriously treat the question and think over the design of the facades of houses and cottages. Do not forget that you and your homemade will also have to look at him every day. And if you can simply throw in the living room in the living room, then with the update of the facade everything is much stuck it and more difficult.

Finishing of the ground floor facade with decorative stone, and attic plaster

Facade design styles

Naturally, the design of the facade of the private house depends on the selected style, and in turn, from the preferred material, and on the contrary, if you first decided on the style, the construction and construction and decorative materials. Possible options for finishing the facades of cottages are as follows:

Modern and modern;

Pseudorussky;

ArtDeko or classicism;

Ampire or baroque;

Canadian or French;

English or Dutch;

Gothic or Romanesque;

East Asian;

Eclectic or header.

As a rule, the design of the cottage facade corresponds to the architectural style of the house. Justice to say that it is extremely rare modern designers Use some one direction. Typically combined two or three similar style. But often the most beautiful facades of houses are created precisely by contrasts. If you want to build an unusual home so that it stands out among buildings in typical projects, you cannot do without a professional designer.

Registration of the facade of the house in Art Nouveau style

The facade begins with the project

Without competent, high-quality project to build reliable and beautiful house It is impossible. If you do not have at least the middle skills of the builder and the knowledge of the architect engineer - do not attempt to save, please contact a specialist immediately.

Creating a project facade for the house includes such main stages:

Determination of the type of facade design, a selection of building materials.

When the house is built from scratch, the facade is thought out with the "box" of the building: the project is approved, optimal materials and so on are approved. If work is carried out on changing the stylistry for a long time built at home, then a specialist is necessarily going to produce all the necessary measurements.

Compilation different options Registration of facade, primary projects.

Select the best option.

Development of a detailed project and compiling estimates.

Lastly, decorative facade elements corresponding to the desired style are selected. The design of facades of houses and cottages is always approved with your wishes. But to listen to the recommendations of the designer and builders are also necessary, since there are many non-nuances on the surface of the nuances in combination of materials. Otherwise, you can never build a house of your dreams, live in which will be pleasant and safe.

Classification of facades based on materials

The project of the facade of the house should be thought out to the smallest detail. To begin with, it is worth understanding which materials can be used to design facade surfaces, in which their features, advantages and disadvantages. In modern construction, both classic materials and innovative, which appeared on the market recently. You can choose:

tree or wooden plaquen;

stone ordinary or ground;

brick or ceramics;

concrete or composite;

plaster different species and textures;

siding or metal;

glass or plastic.

Each of the types of finishing materials for the facade, in turn, is divided into different subspecies and types.

Watch on the video Original facade of the house:

Professional builders advise first of all to navigate the climatic conditions of your region.

The facade coating must withstand:

rain, snow;

radiation of ultraviolet and temperature differences;

wind and dust.

And at the same time not to lose its attractive appearance and operational characteristics. Another important factor: the safety of the material and its environmental friendliness. The last parameter is paid in recent special attention.

Take into account your financial capabilities and availability of the selected material - because the facade is not eternal and from time to time it will have to be repaired and updated. Choosing material for the design of facade planes, you also need to decide with the design style.

Facing brick as an optimal option for finishing the facade of a country house

Finishing siding

Siding is a modern construction and finishing material. It is practical inexpensive. This is a great budget option for those restricted in the means. More often, siding is used to build fences or household buildings - For example, garages. But for the cladding of modern dacha house He is also quite suitable. Especially if you choose not vinyl or steel, but wooden material.

Siding from artificial materials, in addition to affordable and low cost, has several advantages:

durability and durability;

corrosion resistance and biological factors (mold, insects);

wide color gamut.

Siding is easily mounted and dismantled, but despite this, such work is better to entrust professionals. And if you need, the facing is easy to remove and replace on the damaged area, without repairing the entire facade completely.

Important! Siding may not only be metallic, also produce types of wood and vinyl. Wooden siding is environmentally friendly, it decorates the facades of cottages and houses, but not very durable and costs the rest. The vinyl is resistant to ignition and is inexpensive, but did not show itself as a sufficiently reliable and aesthetic finishing material.

Finishing facade siding

On our site you can find contacts of construction companies that offer. Directly to communicate with representatives, you can visiting the exhibition of houses "Low-rise country".

Tile facade trim

Ceramic tile - perfect solution For registration of the facade surface of the townhouse or country cottage. Ceramics has the following advantages and features:

tile looks beautiful and modern;

she is durable and practical;

solid elements are easy to replace, if necessary;

ceramic tile eco-friendly and non-combustible;

it is appropriate in almost any architectural style due to the variety of forms and textures.

There is only one "but": the material itself is expensive. And its laying is even more expensive.

But there is also good news: it is not necessary to fabulous with tiles completely all the facade from the ground and to the roof. You can put the tile only at the ground level or fragments. Author's design using this material for finishing facades looks very original and aesthetically. Usually the designers have ready solutionson the basis of which you can develop individual project, taking into account your wishes and ideas.

Tile trim process

Finish facade brick

Brick looks always kindly and quite aesthetically, especially modern clinker. This is not the most original, but proven version of the facade facing. Modern manufacturers produced facing brick Various forms, textures and colors. Create an unusual composition and thus give a highlight to the overall style of a country house will not be a lot of work.

Facing brick is performed at the construction stage, in parallel with the construction of walls and roofs. But you can apply the brick and to the restoration of the old building, for example, if it is decided to make a ventilated facade.

Facade of the country house from clinker brick

Tree in facades

Tree is undoubtedly one of the popular materials for beautiful finish Country house. It combines superbly with country styles, Russian, Finnish, chalet. Wooden trim uses for decorating a house of american ranch.

What you need to consider must:

the tree requires additional processing with special means that protect it from external factors, mold and insects;

wood - easily flammable, combustible material;

boards have a property over time to dispel and deform, be sure to take into account the shrinkage of the walls.

Finishing facade house with wooden panels

External stone finish of the facade of a private house

Stone facing always looks solid and rich, even in modern High-tec. You can use natural breeds:

• seven or limestone;

  sandstone;

  dagestan stone, etc.

Cheaper will cost an artificial stone house. It is made of acrylic resins and cement, the surface can imitate any kind of natural stone and is visually not different. But at the same time, the artificial stone is much easier and easier to work with it.

The main feature of the stone: its thermostatic properties. That is, in winter it will keep warm in the house, and in the summer - on the contrary, coolness. At the same time, the stone through a variety of textures, drawings and shades, looks very aesthetically and unusual. You can create stunning compositions, thanks to which your home will immediately turn into an architectural exclusive.

The stone is perfectly combined with almost all other finishing materials, so applicable in any architectural style.

Partial finish facade house with artificial stone

Plaster as a type of material for finishing facade

We can safely say that the plaster is the most popular and widespread material for finishing the facade of any construction, not only a country house. Such facades in the circle of professionals are called "wet" due to the technology of preparing and applying the solution. And the material itself, and work with it is relatively inexpensive.

Stuccoings, even the cheapest, are different. Most modern compositions They are distinguished by high performance characteristics, durability and environmentally friendly, so that they are recommended for decoration of walls from "breathable" materials ..

But it is important to take into account the level of plasticity of the mixture in the frozen form. Some plaster with the slightest vibrations and mechanical effects crack and creep. For outdoor decoration Houses, especially standing on urban street or near autobah, such plaster is not suitable.

A great advantage: plastered walls, as a rule, are additionally painted. If you wish, you can repaint them every season by changing the style and appearance of your home. Masters advise to stop their choice on silicone plaster - she combined the best qualities and advantages of other types.

With a competent approach, even the simplest facades of cottages will look beautiful, the photo below presents good things example.

In the photo Completed finish of the facade of a country house with plaster

Mixed facades of private houses

See the selection of various facades of houses on video:

Mixed style in architecture is called fusion. It's not just a connection different materials, For example, the bottom of the stone facade, and the top is from the brick, as some believe. This is a completely special combination. different styleswhere elements of one direction are smoothly moving to another, or on the contrary, contrast sharply.

Fusion can be an ideal solution for those who do not have large finances, and would like to use the remnants of different materials. Many begin to design the facade fusion, relying on their strength and knowledge, but in the end, they give up and turn to professionals that correctly pick up materials and colors, thereby creating a unique and wonderful style.

Fusion Facade Design

Design decorations facades

The designer decor on the facade is what will make the construction completed and emphasize this or that style. Although the decorations are mounted in the last place, we need to think over their type and location at the construction stage. At least, it is advisable to do it. Well, if it is a person who knows what the design of the facades of private houses, the photo of the examples of which can be viewed by coordinating the final result with it.

What is used most often:

stucco, a variety of bas-reliefs, frescoes and sculptures;

towers and arches;

erkers and balconies;

eaves and rusts;

columns and capitals.

In addition to these elements, the facades are also decorated with forged products - lattices, window sills, visors and fences or living vegetation. A stone or brick facade of the house, served by grape vines or roses, look very picturesque and attractive.

Facade of the house decorated with vegetation

And one more point, which can also be attributed to the finish decor of the facade - this is a backlight. Thoughtful, competent lighting in modern design is necessary. With it, you can hide small errors and emphasize those elements that you consider the most significant.

Decorating the facade of the house backlight

Stock Foto Different types and styles of the facade of country houses and cottages

How can the facades of houses look like, photo two-storey houses and not large single-storey with finishing from different materials:

Original facade trim stone and plaster

Russian style facade

Modern house with facade in alpine style

Facade in American Colonial Style

Gothic style facade

Original finish of the facade of the house with an attic in the classic style

Facade finishing with artificial stone and plaster with elements of designer decoration

The facade of the house is made of tiles, and the balcony is decorated with decorated wrought railing

Original drawings on the facade of the house

Watching facade with green ornament

Mixed Country House Facade

Conclusion

You could make sure that plaster and brick are far from the only options for finishing a country cottage. Do not dwell on some one finishing material and style, in fact their great set. A variety of ideas and solutions allows not only to create an original and stylish facade of your home, but also to choose an option acceptable at cost.

Estimates 0.

Each owner of a private house, cottage or cottage undoubtedly wants to decorate the facade of the building to his taste so that his dwelling looks cozy and beautiful. Appearance Houses are no less important than the situation. The owners can show their creativity, fantasy to make a favorite house unique outside, thereby emphasizing the feature of his family.

The design of the facade does not require much costs and can easily be made with their own hands with the participation of all residents at home. Most often, the courtyard of the house and the entire area is decorated with flowers, decorative shrubs, fruit trees and other decorative plants.

If you want to plant shrubs at the perimeter at home, do not forget that they require care.

1. One of the most popular materials for decorating the facade of the house is considered. It not only gives the house with a clean, well-groomed look, but also protects the walls from moisture, it does not destroy, does not fade in the sun.
2. Decorative stucco is used on brick or block surfaces. It is easy to fall, with the help of adding coloring substances can take a variety of colors. On plastered walls can be applied frescoes, all sorts of drawings. You can use stencils or draw any geometric patterns.

The frescoes give the house a unique architecture, they can be performed in a wide variety of styles, in the form of trees, flowers, silhouettes of animals or people, fabulous characters, Mediterranean style, classic, country, baroque, in general, the most refined taste.

1. Tile for finishing the facade of the house has a variety of colors and shapes, which allows you to decorate the house individual elements.
   Very fashionable to use products from. It can take different forms, cornices, borders, columns, all sorts of stucco are made from the foam.
2. The facade of a wooden house is decorated with elements made of carved wood: Porticists, friezes, cornices. An additional decoration can serve wooden figurines of animals or colors that decorate the shutters of the windows or the door frame. Wooden elements need to be processed by varnish to increase their service life, protection from, fungus, rotting.
3. Lighting the facade of the house is not only a practical purpose, but also aesthetic too. Take care of beautiful, inconsistencies and install them at the entrance, on the sides of the front door.

An important question for the owners of private houses is how to decorate your home before the holidays, especially before Christmas and Happy New Year.

The most preferred decision is home decoration and New Year's garlands. Glowing lights give your dwelling the unrivaled spirit of the holiday. To do this, use LED garlands and duralite cules, grids, rains. Pay attention to the quality of the acquisition. Home garlands are not suitable for working on the street in a strong frost.

To arrange a unique Lightsign of a country house. Some owners resort to the help of qualified specialists, since the illumination of the house must be competently mounted.