We will send the material to you by e-mail

Long-awaited renovation in the apartment! In order for you not to hate it in a couple of years, you need to prepare for it. An example of an estimate for the renovation of a premise will help with this, because such data will show how much and in what amounts you need to invest to get your dream home. This is not just a list of purchases, but a whole document that can be entrusted to be drawn up by specialists, but here be prepared to overstate costs. You can just as successfully compose it yourself, it is only important to know how.

The estimate includes all costs, calculates any unforeseen costs, including the services of specialists in different directions. In order to make an estimate, you need:

• Measure the room. This includes the height and length of all walls, the length of wiring, cables, water and heat communications, if any, will be included in the repair. After receiving information on the dimensions, you can, which will become the basis for calculating the necessary rough and finishing materials. It is important to have data on the area of ​​the walls, floor and ceiling.

• Based on the data obtained, it is necessary to calculate the rough materials - make a margin of at least 5-10% at the same time.
• Next comes the selection and calculation of the necessary decorative materials.
• Now for the most interesting and exciting thing: price monitoring. You need to know how much rough and finishing materials cost, the cost of the services of a designer and a team of repairmen, a plumber, an electrician and other specialists who may be involved in the repair process. It is best to draw a table and indicate several options for each item - this will allow you not to make a mistake with the choice.

All the data obtained must be recorded, and then drawn up in one table: so you will have a work plan + the cost of materials and the cost of paying for the work of specialists. It is also necessary to indicate the timing of the work, and if the infusion of funds is partial, then their dates of such receipts.

Nuances

The estimate is not only technical information, it includes an element of creativity. The technical aspect is at least minimal knowledge of the processes that will occur during the repair, understanding of the market building materials, what is needed for what.

A creative approach is a competent distribution of all cost items in accordance with the needs at a particular stage of work. It is important to take a balanced approach to the choice of the brigade, if you will trust the specialists. Do not be fooled by low prices - it is likely that the quality will be the same there. Better make an estimate yourself, the minimum data and numerous templates will help you with this. Why is it better to do it yourself? Everything is very simple: when ordering an estimate from a construction company, you will surely receive as a result 20, or even 30% more amount than it actually is. If you have doubted the truth of the data, then you may well use the services of one more "specialist" - these are auditors. As practice shows, the cost of the estimate will decrease by at least 10%.

Examples of

The photo below is an example of an estimate for the renovation of a kitchen room. All types of work are categorized for convenience. Such options for estimates for repairing the premises will help you navigate and quickly find out how much money will go to individual parts.

Separate subsections are dismantling works... When carrying out a major overhaul, it will be necessary to dismantle not only or old finish, but also pipes, including sewer. And given that the plumbing is connected in the apartment, this work will also affect the bathroom. It is rational to carry out repairs in the bathroom / toilet and kitchen together: this way you can save money. This is followed by the treatment of walls, floors and ceilings. Here you can see that the rough and Finishing work entered in one table, we would recommend separating them.

Plumbing installation is also an important step in budgeting. If it is better to add the riser to specialists, since you have decided to use their work, then it is quite possible to connect the mixer yourself, no serious skills or complex tools are needed for this.

As you can see, there are columns with units of measurement, areas and lengths of all work points. For ease of calculation, the price per unit of work is indicated and then the total cost. The estimate will pull more funds if you entrust the construction company with the purchase of materials. But be careful here: replacement is often practiced quality materials and components for low-grade. Therefore, it is important to control every stage of the work.

The following is presented approximate estimate for the repair of the entire apartment, there is a slightly different compilation scheme, but the meaning is the same. That is, the unit prices and the total cost of the work are indicated. As you can see, here the customer, most likely, will entrust the company with the purchase of materials, for this there is a special column, although it is possible he will purchase himself, and enter this data for clarity. Here is a more thorough study. Pay attention to the last point: the customer even took into account the cost of debris descent, which is also important when carrying out a major overhaul.

An example of an estimate for an apartment renovation

Summer is the time for renovation work in educational institutions. For this period, as a rule, current and major repairs are planned. The form of their financing depends on what type of work will be performed. In the article, we will consider the difference between conducting maintenance from capital and how should be reflected in the accounting for the repair work.

Making a decision on repair

One of the main documents that should be guided in preparing for the repair work of buildings and structures is the Regulation on the organization and implementation of reconstruction, repair and maintenance of buildings, communal and socio-cultural facilities (together with VSN 58-88 (r)) approved By order of the State Committee for Architecture and Construction under the USSR State Construction Committee of 11/23/1988 No. 312 (hereinafter - VSN 58-88 (p)).

According to the norms of this document ( p. 3.2 VSN 58-88 (p)) the institution should monitor the technical condition of buildings and facilities by conducting systematic scheduled and unscheduled inspections using modern means technical diagnostics, which, in turn, will help to decide on the need for one or another type of repair work.

Scheduled inspections are divided into general and partial. During general inspections, the technical condition of the building or the object as a whole, its systems and external improvements should be monitored, with partial inspections - the technical condition of individual structures of the premises, elements of external improvement ( p. 3.3 VSN 58-88 (p)).

Unscheduled inspections are carried out after natural disasters (earthquakes, mudflows, rainstorms, hurricane winds, heavy snowfalls, floods and other events) that may cause damage individual elements buildings and facilities, after accidents in the systems of heat, water, power supply and when detecting deformations of the bases ( p. 3.4 VSN 58-88 (r)).

According to p. 3.5 VSN 58-88 (r) general examinations should be carried out twice a year: in spring and autumn.

During the spring inspection, it is necessary to check the readiness of a building or object for operation in the spring-summer period, establish the scope of work to prepare for operation in the autumn-winter period and specify the scope of repair work on buildings and facilities included in the current repair plan in the year of the inspection.

During the autumn inspection, you should check the readiness of a building or object for operation in the autumn-winter period and specify the amount of repair work on buildings and objects included in the current repair plan for the next year.

General inspections should also monitor the compliance of tenants and tenants with the terms of the lease and lease agreements, if any.

The results of inspections should be reflected in the documents for recording the technical condition of a building or object (technical condition logs, special cards, etc.). These documents should contain:

• assessment of the technical condition of a building or object and its elements;
• identified malfunctions;
• their location;
• the reasons that caused these malfunctions;
• information about the repairs performed during the inspections.

Generalized information about the state of a building or object should be annually reflected in its technical passport ( p. 3.9 VSN 58-88 (p)).

According to the definition given in Appendix 1 to VSN 58-88 (R), building renovation - This is a complex of construction works and organizational and technical measures to eliminate physical and moral wear and tear, not associated with a change in the main technical and economic indicators of the building.

We will deal with the definitions of maintenance and overhaul, which are also given in Appendix 1 to VSN 58-88 (R):

Maintenance should be carried out with a frequency that ensures the efficient operation of a building or object from the moment of completion of its construction (major overhaul) to the moment it is placed for the next major overhaul (reconstruction). In this case, the natural and climatic conditions, design solutions, technical condition and mode of operation of the building or object should be taken into account ( p. 4.1 VSN 58-88 (p)).

Works that should be attributed to routine repair are listed in Appendix 7 to VSN 58-88 (R)... This list is quite long and it lists most of the renovations that cover the entire building from foundation to roof, including exterior and interior decoration, as well as all engineering communications.

Major overhaul should include the elimination of malfunctions of all worn-out elements, restoration or replacement (except for the complete replacement of stone and concrete foundations, load-bearing walls and frames) into more durable and economical ones, which improve the performance of the buildings being repaired. At the same time, an economically feasible modernization of a building or object can be carried out: improving the layout, increasing the number and quality of services, equipping the missing types of engineering equipment, improving the surrounding area ( p. 5.1 VSN 58-88 (p)).

The list of additional work performed during the overhaul is given in Appendix 9 to VSN 58-88 (R)... It is not as long as the list of ongoing repairs. According to him, overhaul works include:

• inspection of buildings and production of design estimate documentation(regardless of the period of repair work);
• equipment with systems of cold and hot water supply, sewerage, gas supply with connection to existing main networks at a distance from the input to the point of connection to the mains up to 150 mm;
• transfer of the existing power supply network to increased voltage;
• installation of fire-prevention automation and smoke removal systems;
• changes in roof structures;
• equipment of attic premises of residential and non-residential buildings for operated;
• insulation and noise protection of buildings;
• replacement of worn-out elements of intra-quarter engineering networks;
• repair of built-in premises in buildings;
• examination of design and estimate documentation;
• architectural supervision of design organizations;
• technical Supervision.

According to p. 5.2 VSN 58-88 (p) for major repairs, as a rule, the building (object) as a whole or its part (section, several sections) should be put. If necessary, overhaul of individual elements of a building or object, as well as external improvement can be carried out.

Determination of the cost of work

To carry out repair work based on the results of the inspections carried out, it is necessary to draw up a defective statement. The form of this document is not legally approved, therefore it can be developed by the institution itself, taking into account the requirements for the primary accounting documents specified in Art. 9 of the Federal Law of 06.12.2011 No.  402-FZ "On accounting", and secured in the annex to the accounting policy.

Based on the defective statement, a decision is made to carry out current or major repairs. In the event that minor repair work is carried out by the forces of the institution itself, then in the future the necessary materials are purchased and work is performed.

If a decision is made to carry out routine repairs by the forces of a contractor, then in accordance with p. 4.4VSN 58-88 (R) for this, the principles of pricing and the procedure for payment for work performed, provided for overhaul should be applied.

In turn, in accordance with p. 5.7VSN 58-88 (R) the determination of the cost of capital repairs of objects should be carried out on the basis of estimated or contractual prices. The contractual price of each refurbishment object should be determined on the basis of an estimate compiled at the prices, norms, rates and prices established for overhaul repairs, taking into account the scientific and technical level, efficiency, quality, terms of work and other factors. The estimates must include overhead costs, planned savings, other work and costs.

The estimate documentation should provide for a reserve of funds for unforeseen work and units, distributed in two parts:

• intended to pay for additional work caused by the refinement of design solutions in the course of repair or reconstruction (customer reserve);
• designed to reimburse additional costs arising in the course of repair or reconstruction when the methods of work are changed against those adopted in the estimated rates and prices (contractor reserve).

The sum of the estimates should indicate the returnable amounts - the cost of materials from the dismantling of structures and the dismantling of engineering and technological equipment, determined on the basis of the standard output of recyclable materials and products at the repair facilities.

Development of design and estimate documentation for overhaul and reconstruction of buildings (objects) should provide ( p. 5.8VSN 58-88 (R)):

• technical examination, determination of physical and moral wear and tear of design objects;
• preparation of design estimates for all design solutions for redevelopment, functional reassignment of premises, replacement of structures, engineering systems or their arrangement again, landscaping and other similar works;
• feasibility study for overhaul and reconstruction;
• development of a project for the organization of overhaul and reconstruction and a project for the production of works, which is being developed by the contractor.

Financing of work

Financing of the current and overhaul of state educational institutions will be carried out in accordance with the budget estimate, and budgetary and autonomous institutions - through subsidies for other purposes or subsidies for the implementation of a state task.

Targeted financing of current and capital repairs is carried out within the framework of various federal programs. So, for example, within the framework of the federal program for the modernization of regional systems of preschool education in 2014 in accordance with Decree of the Government of the Russian Federation of January 14, 2014 No.  22 the procedure for the provision and distribution of federal subsidies to regional budgets, including for the current and major repairs of preschool educational institutions, has been determined.

When placing orders for maintenance and overhaul, autonomous institutions must comply with the requirements Federal Law of 18.07.2011 No.  223-FZ "On the procurement of goods, works, services separate types legal entities» and the developed Procurement Regulations, and state and budgetary educational institutions - all the procedures provided for Federal Law of 05.04.2013 No.  44-FZ "On the contract system in the field of procurement of goods, works, services to meet state and municipal needs", regardless of whether a contractor is involved in these works or the procurement of materials for repair work by the institution.

Recall that educational institutions have the right to a simplified procedure for concluding contracts with a single supplier, if the price of such a contract does not exceed 400,000 rubles. ( nn. 5 p. 1 of Art. 93 of Federal Law No.  44-FZ At the same time, the total annual volume of purchases, which the customer is entitled to carry out on the basis of this paragraph, should not exceed 50% of the amount of funds provided for the implementation of all purchases of the customer in accordance with the schedule, and not more than 20 million rubles. in year.

Reflection in the accounting of repair work

Minor accounting differences in the accounting for renovations will depend on whether outside contractors are involved. Consider two options:

1. Repairs are carried out by the institution itself.
2. The repair is carried out by a contractor.

With the 1st option, as a rule, only the purchase is made necessary materials... With the 2nd - the cost of materials is included in the cost of the work carried out.

The cost of work on current and major repairs does not increase the cost of the buildings and structures being repaired themselves.

According to Note No.  65n the acquisition of consumables (building and finishing) materials is carried out by an institution for Subarticle 340"Increase in the cost of inventories" KOSGU.

Settlements with contractors for payment of services for the repair of buildings and structures will be carried out at the expense of Subarticle 225"Works, services for the maintenance of property" KOSGU.

Organization and implementation of repair work in accounting will be reflected on the basis of primary accounting documents (act for writing off inventories (f. 0504230), an act of acceptance and delivery of repaired, reconstructed, modernized fixed assets (f. 0306002), etc.) government institution in accordance with Instruction No.  162n, budgetary institution - Instruction No.  174n, and an autonomous institution - Instruction No.  183n .

The purchase of materials from suppliers and their write-off for the needs of the institution will be reflected in the accounting as follows:

State institution		State-financed organization		Autonomous institution
Debit	Credit	Debit	Credit	Debit	Credit
Purchase of materials for repair
1 105 34 340	1 302 34 730	0 105 34 340	0 302 34 730	0 105 34 000	0 302 34 000
Write-off of materials used for repairs
1 401 20 272	1 105 34 440	0 401 20 272 0 109 xx 272	0 105 34 44	0 401 20 272 0 109 xx 272	0 105 34 000

When performing repair work by the contractor, the following accounting entries will be made in the accounting of institutions:

State institution		State-financed organization		Autonomous institution
Debit	Credit	Debit	Credit	Debit	Credit
Reflection of debt to the contractor
1 401 20 225	1 302 25 730	0 401 20 225 0 109 xx 225	0 302 25 730	0 401 20 225 0 109 xx 225	0 302 25 000
Prepayment to the contractor
1 206 25 560	1 304 05 225	0 206 25 560	0 201 11 610	0 206 25 000	0 201 11 000
Final settlement with the contractor
1 302 25 830	1 304 05 225	0 302 25 830	0 201 11 610	0 302 25 000	0 201 11 000
Set-off of a previously paid advance
1 302 25 830	1 206 25 660	0 302 25 830	0 206 25 660	0 302 25 000	0 206 25 000

Let's look at a few examples.

State educational institution within the framework of current repairs on their own made a replacement floor covering in the dining room. For these purposes, linoleum was purchased in the amount of 40,000 rubles. 100% prepayment to the supplier.

These business transactions will be reflected in budget accounting as follows:

A budgetary educational institution, at the expense of a targeted subsidy, carried out a major overhaul of the facade of the building. The cost of the work was 2,000,000 rubles. According to the agreement, a 30% advance payment is provided. At the end of the work, an act of completion was signed and the final settlement with the contractor was made.

These facts of economic life in the accounting of a budgetary institution will be reflected as follows:

Contents of operation	Debit	Credit	Amount, rub.
Prepayment was made to the contractor under the contract (RUB 2,000,000 x 30%)	5 206 25 560	5 201 11 610	600 000
Debt to the contractor reflected	5 401 20 225	5 302 25 730	2 000 000
The previously listed advance was offset upon completion of the work	5 302 25 830	5 206 25 660	600 000
The final settlement was made with the contractor after the signing of the certificate of completion (2,000,000 - 600,000) rubles.	5 302 25 830	5 201 11 610	1 400 000

To determine the need for current or major repairs, the institution must monitor the technical condition of buildings and conduct systematic inspections for this. Before starting the repair, it is necessary to carry out procurement or contract procedures in accordance with the current legislation and determine the sources of financing for the planned activities. Depending on the selected forces and means of carrying out the repair, these facts of the economic life of the institution are subject to reflection in the budgetary or accounting records.

How to write a justification for a major renovation of a school building, plans, estimates?

Answer

The justification for carrying out a major overhaul of the school building is the results of a technical survey. It determines the degree of its physical and moral deterioration, the need for repair and reconstruction work.

To conduct such a survey, it is necessary to involve a specialized organization under a civil law contract for the performance of work.

<…>In accordance with clause 5.8 of the Regulation on the organization and implementation of reconstruction, repair and maintenance of residential buildings, communal and socio-cultural facilities (VSN 58-88 (r)), approved. by order of the State Committee for Architecture and Construction dated November 23, 1988, the development of design and estimate documentation for overhaul and reconstruction of buildings (objects) should provide for:

• technical examination, determination of physical and moral wear and tear of design objects;
• preparation of design estimates for all design solutions for redevelopment, functional reassignment of premises, replacement of structures, engineering systems or their arrangement again, landscaping and other similar works;
• feasibility study and;
• development of a project for the organization of overhaul and reconstruction and a project for the production of work, which is being developed by the contractor.<…>

The preparation of the listed documents requires engineering and survey work, and, accordingly, the required level of qualifications. Such a survey is carried out by a specialized organization under an agreement with an educational organization.

Consequently, the establishment of the need for a major overhaul of the school building is established based on the results of a technical survey, determining the degree of physical and moral deterioration of the building. An agreement for a technical survey may also provide for the preparation of design estimates, a feasibility study and a work project.

A technical inspection of the physical condition of a building can be carried out in accordance with GOST 31937-2011 "Buildings and structures. Rules for inspection and monitoring of technical condition", enacted by Order of Rosstandart dated 27.12.2012 No. 1984-st.

Overhaul of the building is carried out to improve its appearance and operational properties. Over time, building structures lose their original appearance, and the state of engineering systems may become unusable. Modern construction technologies allow not only replacing old engineering equipment with new ones without leaving a trace, but also changing the appearance of a building beyond recognition.

Overhaul of buildings and structures implies a cycle of work on replacing worn-out fragments with improved and more economical ones. In this way, the operational capabilities of the building are improved, extending its lifespan. During major repairs, some objects can be restored or partially replaced. A complete replacement is not made for structures with a very long service life: concrete and stone foundations, building walls, wall frames, underground pipes, etc. It is important to understand that the main technical and economic indicators of the building are not affected during the overhaul. Changes in the size of the object and its parts, as well as the replacement of load-bearing structures are related to reconstruction work.

Distinguish between complex overhaul and selective. The first type of overhaul means work on the replacement of structural elements, engineering systems. These works cover the entire building as a whole. Selective overhaul involves the complete or partial replacement of some structural parts of the building or equipment that have become unusable. The type of overhaul is assigned after determining the technical condition of a building.

Building overhaul agreement

The contract is drawn up without fail. This document indicates:

1. Subject of the contract.
2. Cost of work, terms of payment.
3. Responsibilities assigned to the parties:

• customer obligations;
• contractor's obligations.

1. The term of the repair work.
2. Force majeure situations.
3. Manufacturing jobs.
4. Acceptance of the object after the completion of repair work.
5. Warranty.
6. Arbitration.
7. Property liability of the customer and the contractor.
8. Termination of an agreement.
9. Special circumstances.
10. Details of the parties, legal address.

The estimate for the overhaul of the building is one of the important documents that appear in the organization of the repair work. The estimate indicates the cost of work costs, where all expenses are described in detail: wages, taxes, business expenses, payment for consumables, etc.

Before proceeding to the process of organizing a major overhaul, both parties need to familiarize themselves with the existing norms, rules and laws that may be useful when carrying out work: SNiP, OKPD, OKVED, OKDP, etc. Having all the necessary knowledge, the risk of conflict, force - major situations between the customer and the contractor.

Many schools in our city were built in the days of Soviet Union... Any building structure that has been in operation for several decades needs timely repair. When it comes to the life of children, you cannot risk their health and safety, ignoring the need for major repairs.

The opening of the school after a major renovation will surely inspire students and teachers, because it is pleasant to be in a new, stylish, modern school environment and conduct the educational process. In addition, after a major overhaul, you can not worry about the health of students and school staff. Replacing old windows and doors will eliminate the draft problem. Also, during capital repairs, floors and walls are updated, electrical wiring, plumbing and many other outdated, faulty objects are being adjusted. Schools after a major renovation look unrecognizable! The big advantage of overhauling a school is that you don't have to worry about troubles such as:

• peeling plaster and paint;
• uneven walls, floor;
• drafts;
• cold, damp rooms;
• unkempt interior and exterior
  and etc.

List possible jobs during the overhaul of the school

During a major overhaul of the school, the following works can be carried out:

1. Foundation:

• partial shifting (no more than 10%), strengthening of the stone foundation, basement walls;
• restoration of insulation;
• restoration of the blind area around the building (more than 20% of its total area);
• repair of drains near the building;
• replacement of single pillars made of stone, concrete.

1. Walls, columns:

• putty cracks;
• repair of structures that strengthen stone walls;
• re-laying of brick cornices, parapets, etc .;
• re-laying of individual parts of walls made of stone (no more than 20% of the total volume of masonry);
• strengthening with clips;
• repair of columns or their partial replacement (no more than 20% of the total volume);
• replacement of wall-mounted storage units with a stone, metal, reinforced concrete frame (no more than 40%).

1. Partitions:

• repair, replacement of partitions;
• with the above works, partial redevelopment is allowed with an expansion of the area of ​​the partitions no more than 20%.

1. Roof, covering:

• complete or partial replacement of the old coating with a new one;
• full or partial replacement of beams, girders, crossbars;
• repair of supporting structures of lanterns, searchlights;
• full or partial replacement of wall slopes, gutters, chimney covers and other devices.

1. Floors, intermediate floors:

• replacement, repair of interfloor floors;
• replacement of individual obsolete elements of interfloor floors with new ones;
• strengthening of interfloor ceilings;
• partial (more than 10% of the total area) or complete replacement of the floor;
• re-equipment of the floor.

1. Windows, doors:

• replacement of window and door blocks;
• replacement, strengthening of stairs.

1. Interior works (facing, plastering, painting):

• repair of plaster (more than 10% of the total area);
• replacement of cladding (more than 10% of the total area);
• anti-corrosion coating of metal structures.

1. Facades:

• repair of cladding (more than 10% of the total area);
• restoration of plaster (more than 10%);
• restoration of cornices;
• cleaning with sandblasting machines;
• replacement of obsolete parts of balconies and fences.

1. Central heating:

• complete or partial replacement of boiler equipment;
• repair of foundations above boilers;
• boiler room automation.

1. Ventilation:

• replacement of air ducts, fans;
• replacement of electric motors, ventilation ducts, heaters, filters, etc.

1. Water supply, sewerage:

• complete or partial replacement of the pipeline;
• replacement of insulation;
• replacement of pumping units of pumping systems, pressure tanks.

1. Hot water supply:

• replacement of boilers, coils;
• replacement of pipelines, pumping units of pumping systems, tanks, insulation.

1. Electrical networks, communication:

• replacement of fittings, hooks, traverse, wires;
• repair, replacement of cable sleeves;
• repair, replacement of grounding devices.

1. Electric lighting, communication:

• replacement of unusable network parts (more than 10%);
• repair of cable channels;
• replacement of safety guards;
• replacement of lamps with other types.

1. Roads for cars:

• repair of drainage, drainage devices;
• repair of fastening, protective structures of the roadbed;
• repair, replacement of concrete slabs;
• leveling the cement-concrete pavement with asphalt concrete.

Repair work at the school is carried out regularly, before the start of each new school year. The educational institution should meet the children clean and tidy so that the children enjoy visiting it.

Renovation of a school is a large-scale event that requires substantial costs. There are many premises here and all of them are used intensively throughout the year. In order to correctly calculate the amount of costs for performing school repairs, it is imperative to draw up a detailed estimate, which will include all finishing and other repair work.

School renovation estimate

Like any other, the estimate for the renovation of the school includes:

• List of works to be done and costs associated with their implementation
• List of required building materials (in names and quantities)
• The cost of building materials per unit of measurement

At the end of the estimate, the total amount of expenses for the repair of the educational institution is knocked down.

The calculation of the estimate for such an object as a school is necessarily carried out taking into account the Uniform other norms and prices for construction, installation and repair and construction work and correction factors. The market price cannot be taken into account, since it will be difficult to justify it in the budget expenditure statement.

Before proceeding with the preparation of estimates for the repair of an educational institution, it is necessary to first work out in detail the architectural part of the project (design of premises, building facades).

Estimating repairs

The calculation of the estimate for school repairs depends on what task the owner of the object sees in front of himself (that is, what kind of repair is planned). If we are talking about the capital reconstruction of a building and its premises, then it may contain expenses for the following types works:

• Redevelopment of premises
• Roof repair
• Full or partial replacement of communications
• Replacing windows
• Facade renovation.

The estimate for the finishing of the school ( redecorating) does not imply large expenses, it usually provides for extremely inexpensive finishing work:

• Painting of windows and doors
• Glazing
• Wall decoration with wallpaper
• Floor painting or linoleum replacement.

The list of works and materials for their implementation is negotiated with the customer before drawing up the final estimate. A competent estimator is able to calculate an estimate by adjusting it to any budget (if the amount for its implementation has already been determined). At the request of the customer, he can reasonably "cut" or "wind up" the expenditure part of the estimate to the required amount.

A ready-made estimate for repairs is the main tool for monitoring the subsequent work of contractors providing construction services.

Qualified assistance in budgeting

The creation of an estimate is sometimes entrusted to representatives of construction organizations, who are subsequently engaged in the repair of this object. In the case of a school renovation, this is not always a viable option. The amount of estimated costs is usually required already at the stage of planning the budget of the educational institution for the new calendar year.

The amount of financing required for the renovation can be calculated in advance. A specialist professionally engaged in the creation of estimates will help with this.

You can order the services of a qualified estimator through the YouDo service. Performers Yuda offer favorable service rates and have extensive experience in drawing up cost estimates for public sector facilities.

To order the calculation of the estimate, it is enough to leave an online application on the website.