The facade of the house can be considered his peculiar architectural robe. It's like an outer shell that formms the impression of the general guise of the building, as well as about its owners. Undoubted is the fact that the selected for outdoor decoration Buildings The style reflects the preferred color gamut, and the other taste addiction.

It is necessary to take into account the fact that experienced builders do not recommend using such plaster for buildings close to motorways. The fact is that the vibration transmitted on the walls from passing transport can cause education in the material.

Stucco acrylic. This material is characterized by excellent moisture resistance and plasticity.

But technical features Material manufacturers may cause an impenetrable film on the surface of an impenetrable film, which is an obvious obstacle to the evaporation of moisture and respiration of the material. It should be noted that if we are talking about, for the insulation of which polystyrene was used, or arranged along the motorway houses, then for them this quality becomes more advantage.

Silicate plaster. This material has a lot of advantages. It has high plasticity, good air permeability, its antistatic qualities warn the accumulation of dust particles. If you take into account the use of the material, then, among other varieties of plaster, it can be called the most expensive, and, both in terms of the value of the material itself and on the conduct of installation work with it.

Silicone plaster.This type of outdoor decoration has connected all the best quality of the previous ones. This stucco has become a hit among other varieties of this material. Deserves the fact that successful combination The excellent quality of the material accompanies quite a democratic price.

Facade of the house: decoration siding

This material for the outer decoration has several varieties:

• siding wooden;
• metal.

Wooden siding is used to finish the facades for quite a long time, and managed to establish themselves with best side. His vinyl analogue of such popularity did not achieve, because he could not assure homeowners in their safety. It is believed that, in fact, there is no reason for this. What is the obvious advantages have the material?

• The facade creates a protective screen, fully ventilated, helping to remove excess moisture, and does not interfere with the natural respiration of the structure of the structure;
• Vinyl coating is an irresistible obstacle to the impact of harmful ultraviolet, is perfectly cleaned, it is possible to retain the primordial look for a long time;
• The chemical composition of the material allows it to not be involved in the combustion process, but if the fire occurs, the release of harmful substances into the atmosphere, outside the building, in no way worsen the composition of the air indoor.

Siding wooden

The durability of individual varieties of wood is not too high. However, the material made from impregnated wood acquires not only increased wear resistance, but also special resistance to the action of unfavorable conditions.

Tile facade trim

In the design, this method of finishing looks simple enough, but it is quite complicated in the technical performance, and very silence. All literate installation rules must be strictly observed.

• It must be remembered that the walls made by masonry tend to shrink;
• The presence of a set of types of tiled material involves the use for each specific grade glue, suitable in each case;
• The market presents various varieties Tiles whose surface imitates all sorts of materials. It can be a chopped stone, a noble tree, simple. If preference is given to some of the species of this material, it does not prevent you from taking care and about the appropriate to the caliper. Its use will provide the most spectacular and elegant look;
• The pleasant possibility of a combination of various textures is not excluded, but selecting the materials suitable for this, their size should be taken into account. To give the structure of a certain thoroughness and monumentality, larger parts and items can be applied to finish the base. The walls are separated by more neat, miniature details.

Brick: Facade Finish

Such material as a brick, time immemorial, was a characteristic feature of goodness. When it appeared special - a certain respectfulness was added to it. Usually, the facing by this material is carried out at the level of the construction of bearing walls.

Therefore, we can assume that the appearance of the structure in advance is thought out the master. But there are other cases. Suppose the building is already built, but something is not set, and it looks not too attractive. The situation can be corrected by the use of bricks. In what cases is it advisable?

In other words, the presence of air gap and ventilation hole is required. If this is not done, then the destruction of wood is possible, because the condensate will be assembled on the surface.

Facade Design House: Styles

Thinking what the appearance of your home is the process is creative.

However, it is necessary to relate to him responsibly and seriously, commensurate desires with opportunities, trying to find the golden middle.

All stylistic solutions can be divided into several types:

• High Tech and Modern;
• Country style;
• Classic;
• Styles developed by Canadian and British motifs;
• Chalet.

Industrialism and minimalism.City houses with such features are characterized by an obvious desire for industrialization. At the peak of popularity among homeowners and designers, there are now minimalistic styles, distincting to the direction of High-tech. The main concept of decorated buildings in this style is the simplicity of design, conciseness and clarity of all forms.

For high-tech, multifunctionality and convenience are characteristic. For decoration external walls The buildings are used plastic, glass and metal. The unpretentiousness and rigor of the style of the facade is highlighted by the ascetic color scheme - the black with white is dominated, and the color of steel.

Country varieties.This is the real stream of styles consisting of a variety of different currents with their peculiar characteristic features. This type includes french Provence, Russian village, Alpine Chalet, Cowboy Wild West. It can be said that the country is a multinational style connecting the customs of a certain country.

It is often used natural for its incarnation. natural materials, such as tree and stone. The stone can be taken and artificial, since, thanks to modern technologies, it is almost impossible to distinguish it from the present. This style is especially suitable. country housesLocated near the lakes, mountains or forests.

Classic.This style is constantly high popularity. What are its main features? Houses decorated in the style of classics have rather proportional and clear forms.

All parts and elements of the facade are characterized by symmetric geometry. Door and window openings are drawn up in a traditional rectangular form.

The use of arches is allowed. Among other types and types of design, the classic style is highlighted by its simplicity and undisturbality, unassumaturation and refinement. And although this style is quite clearly emphasized by the desire for minimalism, there will be no extra elements such as elegant columns, massive railing, and other decorative details.

Design Facade Project

First stageproject development involves the beginning of the design of the sketch. If you have the necessary skills, it can be done independently, otherwise it is better to contact the services of specialists.

The future owner of the house expresses him his wishes, preferences, requirements for the future structure. Then go to the design of the facade directly.

If the building is already built, you will need to do all the necessary measurements. With the help of special computer programs, you can conduct visualization of the estimated areas of style in order to determine the choice of specifically suitable. According to the selected materials, their upcoming consumption is calculated, prepare the estimate. It requires special professional skills, so it is not recommended to do it yourself.

Next stage - Beginning of decoration. Here it is already quite acceptable to rely on own forces, and spend it yourself. During the work, it should be remembered that the general design of the house should be harmonized with the decoration of small parts. All parts and elements of the structure must correspond to each other, and are made in a single stylistic solution.

The design of the design will be a design event. In the process of their implementation, it is possible to implement all their wishes in terms of finishing the facade of the house. It should be noted that a similar design project can be developed not only for a newly built house, but also for old housing. The main difference in the case of alteration of the old house is the need to dismantle or alteration of the previous facade. This, of course, will complicate the whole process to some extent, but in no way will affect the end result.

QPSTOL.RU - "Cubistol" seeks to provide the best service to its customers. 5 stars on Yandexmarket.

Lifemebel.ru - furniture hypermarket with a turnover of more than 50,000,000 per month!

Ezakaz.ru - furniture presented on the site is manufactured in its own factory in Moscow, as well as proven manufacturers from China, Indonesia, Malaysia and Taiwan. "

Mebelion.ru - - the largest online store selling furniture, lamps, interior decor and other goods for a beautiful and cozy home.

The stylish design of the walls of the building is the basis of any exterior of the yard. In order to give their own dwelling individuality, you need to carefully think about the design of the facade of the house, develop a project and choose building materials.

Design options

More and more country houses Eclectic or "rustic" design options are selected. Consider the most interesting of them:

1. Alpine style or chalet;
2. Original design;
3. Country;
4. French direction or Provence;
5. Eastern direction;
6. Modern English style.

The most common options for the design of the facade of a private country house in style. This is a very peculiar direction, its feature is a large number of Natural materials from which cladding is made. It is predominantly a tree, but it is often complemented by stones or brick masonry. It is withstanding a soft brown or close to it. When creating such a cladding, it is necessary to take into account the presence of a canopy, which is obligatory in such buildings.

Photo - Chalet

Original style is associated with minimalism or popular high tech. it perfect design for one-storey houses From brick, where the facade should not only complement the landscape, but also be part of the exterior of the yard. Most often there are frame structures, providing additional ventilation of the building. The outer layer of decoration can be built of metal, plastic or glass depending on the possibilities and preferences.

Photo - Facade Modern

Materials To cover modern buildings:

1. Siding PVC. Siding is very simple to flicker the facades, in addition, now there are unique plates that not only provide the perfect surface, but further increase the thermal insulation. This is the best option for a small frame house;
2. Galvanized professional flooring. Another famous and loved by many masters option. The profile is made of cold-rolled rolled steel treated with a variety of polymers and zinc. This increases its strength and durability. Also, the metal base significantly strengthens the walls, protects them from negative impact. ambient and reduces the fire hazard of the building;
3. Wooden siding. For design simple home in classic style with High Tech elements ( big windows and plastic) quite often use various wood coatings. They have nothing to do with natural wooden blocks, but it is practically completely transmitted to both the color and texture of a genuine timber.

In addition to the use of individual overhead facing, the modern uses the plaster of the walls of the core, "fur coat" or mosaic. it great solution For urban, cotter, if you need to combine the availability of processing and beauty of the surface.

Country - Optional design of the facade of the village house under the tree. As follows from the name, it is a fairly light style, the main role is played by wood. Unlike Chalet, Country very rarely combines several coatings, most often it is bars, boards and other wood options.

Photo - Country Style

Modern provence is often called the half-timber. This landscape design It implies a large number of diverse coarse elements in the exterior, but at the same time they skillfully combine with neat and cute details. Facades in particular are complemented by specially treated beams. Earlier, real logs made of wood were used for the facing of the outer coat, but they were too tightened by the foundation, thereby significantly reducing the durability of the building. Now outside the house is covered with a special tile or overhead boards that simulate the present coating.

Photos - Provence or Fakhverk

Building eastern style It is impossible to confuse any other. They are not covered with tiles, bricks or wood, and are processed with light spacure and paint. It helps to create the effect of a smooth glossy surface. Naturally, such a decoration of a residential building immediately issues the defects of the construction (possible cracks or irregularities), so many builders before creating such a direction pre-insulate the house of foams or thermal stilts.

Photo - facade in oriental style

Monumental english style - This is an artificial brick progenitor on the outer surfaces of the building and the fence. As you know, initially in England, the houses were built exclusively from the stone, this material was perfect high humidity and sharp drops of temperature. Now, thanks to the presence of a huge number of analogues from such technology, they have been departed, but at home still covered by tradition artificial stone or shield.

Photo - English finish

This version of the design of the country or two-story private house is rarely used to cover the entire facade, since such a design is very weighting foundation. Most often, the layer of stone is installed on separate parts of the wall. Materials are mainly used:

1. Granite;
2. Marble;
3. Seven;
4. Slate.

Depending on the solution, you can create a very beautiful and original style of your home. But it must be remembered that on average, the stone takes all the construction of 40 tons per 100 square meters.

It should be understood that if it is incorrect to choose the design of the face wall, then you can not only spoil the landscape design, but also contribute to the destruction of the carrier system of the house. Before starting construction, it is necessary to refer to experts in advice. Development individual project will take approximately a week and, depending on the complexity, will cost in the amount of 1000 rubles to several tens of thousands (for example, the project of the facade one-storey house In Moscow in the style of a chalet of 120 square meters. meters has the cost of 3,500 rubles). Also, the price depends on the size of the construction and the number of decorative elements.

Photo - House Finishing Project

When creating a technological map and other calculations, the wizard will take into account not only the desired size and color of the decoration, but also its pressure on the foundation, which is very important for houses on piles or pillars.

1. Be sure to calculate the size of the yard before starting work. Many materials do not withstand the effects of water, so it will be necessary to consider the possibility of expanding the roof or porch;
2. For creating beautiful facade cottages preferably use strong durable materialsthat do not require care. This is a natural stone and professional flooring;
3. When choosing a coating, consider not only its texture, but also color. In particular, it is important for the house in the style of Provence and Chale, otherwise it may turn out a completely tasteless design;
4. For the arches from the wood, it is best to choose durable and light breeds: pine, larch, Canadian maple;
5. Before starting work, be sure to browse the photo by which you can develop the design of the facade of the house. This will help you take into account many moments and mistakes, likely in the construction process.

The same house, as well as a group of buildings, may look different, just change the design of the facade of the house. At the same time, the design of the facades of the private house - the task is quite a suitable to any owner who wishes at least a little bit to save or loves to do it yourself.

Decorating facades is a fascinating thing, so multifaceted that you can redo your home every season. And anyone, even the most insignificant element here is of great importance.

Color, for example, affects the perception of the house and sets it the necessary mood. Therefore, before issuing, first of all pick up the color range, choose a combination of colors and a total tone orientation.

Properly chosen texture will give the house with a home and relieve it from a monotonous species.
The skillful composition of these two components will task the common style of your home and will allocate among the others.

What materials we have

But before starting to dive into all the details of changing the appearance of your housing, the first thing you need to get acquainted with the materials you personally or your contractors will separate the outer walls, their features and nuances during work.

The design of the facades of the private house can be performed using the following materials:

• stucco intended for facades;
• siding;
• tile or stone;
• brick masonry.

These are the main types of finishing facade materials, which will first be offered to you in any company, which makes the design of facades of houses in your region.

Decorative facade plaster

Let's start with the facade plaster, since this is the most common type of decoration of external walls at the moment.

This type of facade has another name - "wet". All because the process of its application includes and "wet" work. To finish the external walls of houses and other buildings, specially designed mixtures use, and we will look at this issue in more detail.

Mineral Plaster

Mineral is one of the cheapest and most commonly used. But before buying, remember, this finishing material has the lowest indicator of plasticity and its durability is not very large. Although this can be considered not even a minus, given the price and excellent environmental qualities.

When covering this type of plaster, the house without problems continues to "breathe", and in order for the air in it to remain clean, quite ordinary ventilation.

Do not use this plaster on the front side of houses and buildings, which are located next to the motorways or railway station.

Vibrations and noise will be transmitted to the walls, which will be formed by cracks.

The period of "life" of mineral plaster - about 10 years. When used on new buildings, you should wait - the house should give shrinkage.

Acrylic plaster

Good plastic qualities and moisture resistance shows acrylic plasterbut when using this type of plaster decorative facades Houses can not breathe. It is not quite a flaw, since such a type of plaster will not be replaced for those or along railway, absorb extra vibration.

But acrylic plaster, as well as mineral, has the properties to choose dust, so for buildings located near the roads, it will not the best choice. In addition, she has high strength, and the absence of the ability to "breathe" compensate for ventilation systems installed inside. Serves acrylic plaster up to 20 years.

Silicate plaster

Silicate plaster "absorbed" all the most best properties: Plastic and at the same time passes air. Additional antistatic characteristics only contribute to their glory.

But it is considered the most expensive type of "wet" plaster. Expensive both the material itself and mounting work. Decorating the facade of the house with silicate plaster allows you to protect the outer walls from most unfavorable environmental factors. She is holding up to 25 years.

Silicone plaster

The most relevant of all "wet" plasters is now considered silicone. And such is done:

• good elasticity
• ability to "breathe",
• antistaticity.

She is the only one of all absorbs all sorts of chemical elements Both salts.

Under the compliance with the entire technology of application, the plaster will last up to 25 years, even if "is located" near the highway. The design of the facades of the private house with silicone plaster, can be said, "preserves" the outer walls of your dwelling for two to three decades.

Tool and surface preparation

Work on application facade plastecrockers It can be trained both manually and mechanically.

To put the plaster mixture manually, you will need only standard tools that can be purchased at any construction store.

If you want to create a beautiful textured surface, you will need special spatulas and some skills to work with such types of compositions.

The design of the facade of the house by any kind of plasters should be held in accordance with the technological card. While performing work it is necessary to observe all technological featureswho asked the manufacturer.

Preparation for work is as follows:

• prepare walls for work, remove the dirt and old layers of finishing. Pits and large potholes make a special solution.
• to improve the adhesive properties of materials, the surface will not be superbilled.
• for perfectly smooth application, install lighthouses.

Preparation is completed, you can proceed to applying.

Plaster and painting

The first step is "spray". Throw the solution with sharp moves, then align it on the beacons. Work is difficult and requires a certain level of endurance. The plastering machine can speed up the work, but the price will be higher.

If there is a need for additional alignment, apply the second layer, be sure to dry out the first layer.

Pressing the texture and other works will depend only on what type of plaster you have chosen.

The final stage will be. But if you use special plasters with pigment elements - this is not necessary.

Vinyl Siding

Ensure yourself:

• when using vinyl siding around the wall, a protective screen is formed, while it is ventilated;
• these panels do not give moisture to fall directly on the walls and the facade is easy to wash;
• good durability;
• it does not contribute to the spread of fire, but during melting there are harmful connections.

You should not rejoice at the low price of PVC facade, work on its installation and additional materials are much more expensive. The cost can be found only after all the necessary measurements and the calculation of all additional materials required for finishing works.

Most. an important element When installing this type of facade, the calculation is calculated on expansion and compression. Be careful and look so that the masters calculate everything as it should, otherwise in the summer panel it will come up and have to resort to the alteration.

The cost of wooden siding is big, but it looks very solid. Unfortunately, its service life is not very big, although, given the modern technology of wood processing, durability can be increased. The tree passes a special processing under high pressure. This increases the density and resistance to the destructive factors of the external environment.

Metal:

Durable, fireproof and modest is considered metallic siding.

They produce it from steel with a zinc coating, which is using additional processing with a polymer.

There are several minuses: a small choice color Gamma. and textures.

Of course, the metal spends the current, but this problem is solved grounding.

Radiomagnetic waves in the house are not important: Mobile phones in the house will catch a signal weakly, but this housing will be shielded from unwanted electromagnetic emissions, which in the modern city are one of the sources of chronic diseases.

When finishing the facade of the house by siding, be sure to calculate the amount of material necessary accessories and fasteners.

If you have the necessary skills in the houses finish, you can perform the entire robot yourself. In general, it is an exciting occupation, you can only make it for the sake of obtaining positive emotions. Many home owners are considering decorating their own dwellings as a hobby, buy an expensive tool and seek to do everything in the end with their own hands, not attracting employees or construction companies.

Mounting siding panels

Level drops should not be more than 2 cm. All major defects that can affect the strength of strengthening supporting profiles are subject to mandatory leveling.

Walls made of wood should be carefully cleaned from rot, the drunk boards should be replaced, and then everything is then handled with a special primer with disinfectant properties.

The design for fastening the panels is not necessarily vertically, the shap shave is 50 cm somewhere.

Galvanized profiles are easy to install, using special suspensions, they are simply attached to the walls.

When installing wooden profiles, it should be remembered that the level of their humidity should not exceed 20%. Start from the left corner of the wall and go to the right, necessarily vertically, without distortion and slopes, step about 50-60 cm.

Fasten them on stainless dowels or self-tapping screws. It is not recommended to use cloves, because of the weather, this type of fasteners can be overwhelmed.

Remember, siding when temperatures can be compressed or expanded, leave a gap from 4 to 9 mm from the edge of the mounting holes.

Tile facade

The facade, trimmed by tiles, looks beautiful, but the price for its fulfillment is rather big, it is necessary to maintain the installation technology.

Such facades are made with all seriousness and for a long time. Even the usual wall can become a work of art with this form of finishing, and the decor itself of the facade of the house will cause envy of your neighbors. Do not forget that the tile for finishing the outer walls should be precisely for the outer walls, and not for the internal, they differ.

Decide the pattern before laying the tile. The surface may simply be smooth or with any pattern. Often use several colors to give the house more beautiful style and mood. You can come up with your option, but you can choose from ready-made.

Installation tiles on external walls

Installation work starts after installing the crate. Frame attach vertically, relative to the floor line.

Fastening Choose according to the surface with which the tile will be connected.

Use the water level to create horizontal markup, it will make it easier for the screw. Remember, the tile is laid from the bottom up, be sure to the corner of the house. The first tile is attached to 4 screws, all next to 2.

Tile can be mounted differently if there are no elements for fasteners, just try it on glue. Consider a fairly large weight of tiles, you should give a good layer of special glue made for external cladding.

Decorating walls brick

The decor of the house facade, made by facial brick, makes a visually home much larger. However, the thickening of the walls with artificial brick does not make the house warmer.

To give heat inside, it is necessary to comply with some rules, for example, there should not be all sorts of air holes and gaps, it is best to make a cent facade in this case, warming up the mines. Besides for brick masonry It is necessary to strengthen and expand the foundation of the house, make waterproofing.

Preparing for laying bricks

Preparation for styling brick is simple: Clean the surface from mold and fungus, close all sorts of cracks.
Mix the solution thoroughly, the consistency should be as specified on the package, the seam should be thick from 10 to 14 mm. Sollar apply to a smooth layer.

During work, do not forget about ventilation holes. Next to the windows and the door brick will need to be cut.

Strict external masonry schedule

First, make a trial laying - it will give you to understand how much the solution is needed and look at the behavior of the brick. As soon as they found their pace of work, do not change it.

The design of the brick does not tolerate downtime and local breaks, it is not siding and not porcelain. In this matter, the brick is very similar to the decorative plaster - there, too, there should be no breaks in the application of the finishing layer lasting day - two.

1. 
   All the more firmly strengthen their position in the construction sphere of the house of aerated concrete. They look quite attractive - the color of the blocks is almost perfectly white, and the seams ...
2. 
   To get a presentable and solid exterior of the building, it is best to choose facing brick For the facade. Show finishing options Bricks can have photos of already ready-made facades of brick houses ....
3. 
   At first glance, there is no smaller problem than to answer the question - what should be the colors of the facades of houses, which color to paint the facade of the house. It would seem that,...
4. 
   The most common finish of the facade of the house plaster in modern conditions Multi-storey construction is used very rarely. At the same time, there are many devastating and economical owners who ...
5. 
   The insulation of the facades of foam - one of better optionsIf you want to save on electricity and gas for heating your housing. Polyfoam is perfect for insulation, ...

Owned by the owners of a private house, as a result of buying or construction, people strive to bring marafet not only in the interior, but also in his exterior. A beautiful, harmoniously folded house, will not only delight the eye, but also to cause respect for his masters from the neighbors and just past passing people. Aesthetic success in the task is - envy of how suitable materials will be selected for finishing the facade of the house. It is worth choosing them, leaning on the existing area, adjacent territory and the overall terrain landscape. And of course, do not forget about the properties, general technical indicators, installation methods, the final value of the material and all related works.

Therefore, today's article dedicate to what happens modern finish facades of private houses. Consider the most popular and actual options that exist in the modern construction market.

Finishing of facades of houses - plaster

Stucco, perhaps the most the oldest option To protect and decorate walls. It is used for both internal and external work. This is an inexpensive way of refining, moreover, with the help of it, it is not necessary to protect the material of the bearing walls, of which the house is built, from the destructive effect of the external environment. Because after drying, the applied layer becomes very durable, such a finish of the house will last for many years, but only if all the technical conditions are observed. Their violation can lead to cracking, rocking and shocking plaster. Accordingly, all this will negatively affect its service life.

You can also add its ability to advantage, as we change the temperature and atmospheric humidity, absorb and give moisture, that is, it is "breathable" material. What positively affects the state of the whole structure and microclimate inside the building.

The main drawback is a difficult process of applying plaster on the walls of the house. Without knowledge and experience, it is practically not possible to do it, because there are many nuances that you need to know. Moreover, spent skills and patience are needed, as it is technologically a long and complex process in which the hurry is not acceptable. However, there is different types Plasters for exterior decorationWith which you can work with various technical devices. For example, the coating coating can be applied, both manually and with a special typewriter.

Materials for finishing facade house photo

How to separate the facades of the house - Siding

Any type of siding is a kind of ventilated facades, because they are mounted on the frame pre-made on the walls. That is, the panels are not fitted close to the wall, but as if they hang over it, forming another false wall. The main advantage of such a finish is that it is suitable for most types of buildings. It does not matter, the building is elevated from bricks, foam blocks or logs, carrying a frame can be applied to any of them.

Another of the not unimportant advantages is expressed in the ability to pave the insulation into the cavity, between siding and the main wall. Therefore, such material is used when it is necessary to carry out additionally insulation of the house.

Siding, depending on the species, can last quite a long time. The variety of options is simply a huge, among all you can allocate the most popular, it is vinyl siding, metallic and wooden siding block house.

Finishing private houses photo

Also, thanks to its reliability and durability, the so-called fibro-cement facade panels are increasingly popular, despite the fact that their cost is significantly different, the demand for them is growing. Justifies yourself this option with durability and a fairly large service life of up to 50 years, as well as beautiful external species.

How to separate the facade of the private house: Siding

Facades from natural and artificial stone

Natural stone was previously used to build buildings, the houses were durable at home and could serve several centuries. Relatively recently began to produce facing materials. Connoisseurs of natural naturalness, prefer precisely this variant of wall decoration. Environmentally friendly stone as much as possible looks in the surrounding landscape. The house decorated with such material looks very beautiful and expensive. In addition, the stone is durable and very durable, depending on the thickness, carries a different degree, insulated effect.

By cons increasing this product, two facts are high cost, both the material itself and its installation. Facing the walls of the walls is associated with great complexity of work - in this regard, the material is quite capricious, as it has a fairly large weight. For this reason, it is poorly fixed to the surfaces. Fix it because of this, usually according to the means of consuming into the solution. As a result, a slightly speaking on the surface of the solution as, would capture the stone and holds it well without giving falling.

Artificial facing stone - In essence, the analogue of natural, after all, the service life is as very large, while the line of decors is already much wider. If it is further compared with natural, then among profitable advantages can be highlighted - a small weight, which speeds up the installation process. It also affects the presence of a stone of different shapes - a semicircular, in the form of an angle, etc. With all this, its price remains a more attractive natural analogue.

How to separate the facade of the house: stone

Facade panels for outdoor finish

Today, extensively apply in the facing of walls of buildings of various panels. Which can be mounted, both straight on the wall and for a pre-manufactured crate. Due to the fact that the material is produced in the form of sheets, their mounting on the walls is quite easy and quickly.

Material for finishing the facades at home: facade panels

According to the structure, they are single-layer and multi-layered, the latter are not only decorative function, but also provide additional thermal insulation of the walls. Among these, you can select facade thermopanels, externally they look like a brick or stone, but inside contain an additional insulated layer.

Other species are made of a wide variety of materials - there are panels using ceramics, fiberglass, polyurethane foam. Each of them has its own installation features and specifications. You can find out more about them directly from sellers or directly from manufacturers on official sites.

In continuation of the topic, below we offer you a small photo gallery of private houses with beautifully decorated facades from a wide variety of materials.

Finishing facades of private houses photo

The appearance of the house is one of the defining factors forming its image. The first impression is depends on the facade not only about the building, but also about its owner. In addition to the reliability and convenience of internal planning,it is important that the house has alsoaesthetic qualities - an attractive appearance. In such a house, no doubt, nice to live, but also beautiful house High liquidity!

If you want to make the facade of your home beautiful, I offer you a service -Design project facade house (cottage / townhouse / cafe) .

My name is Dmitry Novikov. I am an architect, an individual entrepreneur. I have a higher construction education (MGSU MII). Professionally engaged in the design of private country houses since 2007. Performed more 77 Projects of new houses and facades design. I work in such styles and directions as classical architecture, modern, modern architecture, ecological architecture and design vasta.

More information about me can be found

_______________________________________________________________________________________________________

D.what occasions are the facade design of the facade:

● You are just going to build (or just build) your home, but do not know what to do with the facade.

● You have an already built house, the facade of which does not fully satisfy you.

● You want to attach or change the entrance group to the house.

________________________________________________________________________________________________________

The composition of the project of the facades of the private house:

● Three-dimensional realistic visualization of the model of your home from several angles;

● Drawings of facades with detailing of facade decorative elements;

● Specification of facade decorative elements indicating the brand and manufacturer;

● Drawings of the necessary nodes and parts (in each project individually);

● Detailing piece and copyright elements;

● Table volumes of the main used building materials;

● Here is the implementation of this project - photo of the house in the vicinity of Dubna at the final stage of the facade finish (by clicking on the photo, it can be increased) :

(Download Album Project - 7.52 MB)

Examples of my works - design projects of facades of private houses :

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

Design project facades.

I will demonstrate in AM, which is a project design facade private houses On the example of this conditional (pretty standard O) Cottage A:

It is a pretty cute and inexpensive cottage area of \u200b\u200babout 200-250 sq.m. Suppose it was built 10-15 years ago, when there was no such a variety of materials for the exterior decoration, and therefore it looks pretty boring about and ascetic. Let's see what you can do with it ... (click on the link below)

● In order to start working on the project facade i need to have drawings for which house was built. If you do not have such drawings for some reason, then me necessary perform measurements at home;

● Then a meeting is needed to conclude a contract and discuss the wishes for the project of facades andfuture appearance at home;

● After that, according to the drawings or measurements, I build a three-dimensional computer model , on the basis of which will be carried out on Design (project) facades ;

● Usually, the project is enough one to two, the maximum of three design options, but in this case to demonstrate how this house can be issued, I will show you 4 different options.

1. Cottage in class forssic style.

Perhaps the most common style in private country architecture in our country. I highlighted the entrance group, setting over the entrance a massive balcony on columns, which completely transformed the entire main facade. Walls remained plastered, but I replaced the cladding of the base: instead of the old artificial stone Used natural sandstone. IN decorative finish The facades are used by light architectural elements from polystyrene foam, as well as products from architectural concrete.

2. Cottage in Georgian (English) style.

No less popular style in rustic construction. Attached entry group The solemnity of the main facade gives the massive fronton and columns. Vintage English mansions were, as a rule, bricks, so I used in this embodiment the clinker facing the facade mimicing the old brickwork. Clinker is a beautiful, durable and practical material. Also in the finish used light facade decorative elements.

3. Country style cottage (half-timbered).

In the external decoration in this embodiment, techniques imitating medieval European style are used. The first floor was often stone, and the second frame (half-timbered). The use of natural building materials in the exterior decoration (wood, natural stone) gives design accuracy. Brackets and wooden fences are mandatory attributes of this style.

4. Portuguese cottage.

Distinctive features This style is bright, saturated colors and covered terraces, elongated along the entire facade (in our climate conditions, the terrace can be replaced with a glazed veranda). According to the facade decorative elements, this style is close to the "classic", but it is distinguished by greater originality and "ease", as well as the widespread use of wood products. An integral style element is the natural ceramic tile on the roof.

Thus, ordering design project facades You will receive a well-thought-out concept of facades with the full profile of all architectural details. In the project I will pick up the color, materials, decorative elements for the exterior decoration, which will fully satisfy you, both in architectural and financially. All this is important to do before you start directly to construction work. I will be happy to help you!

The cost design of the project of facades at home:

Total area of \u200b\u200bthe building	Project cost
up to 150 sq.m.	50 000 rubles.
from 150 to 200 sq.m	60 000 rubles.
from 200 to 300 sq.m	67 000 rub.
from 300 to 400 sq.m	80 000 rub.
over 400 sq.m.	Individual value

__________________________________________________________________________________________________

MY Strengths:

I work officially (registered as an IP) and always conclude with customers the official treaty, which allows you to protect the interests of the parties.

I have in my portfolio more than a hundred performed projects of private and public residential buildings in Russia and in other countries of Asia and Europe.

Creative approach to work. I try to stick to the motto "make art, not work" - "are executed by art, not work." Each of my project is a unique author's product. It possesses primarily intellectual value, and as a result - high liquidity. Accommodation in stylish, beautiful and comfortable house It will give you pleasure every day.

AND nadividual approach to each customer. I always try to find out how best to know what the customer wants to design a house that it is ideally suitable for him.

I guarantee strict observance of the deadlines. I am responsibly related to the observance of the work schedules specified and registered in the contract.

I have experience not only design, but also the implementation / construction of houses on your projects.

________________________________________________________________________________________________