From what materials were used when finishing workah on the facade of the building depends not only by its external appeal. The qualitatively separated facade has a practical importance, significantly increasing the performance characteristics of the entire building, reducing the heat loss during the cold season, simplifying the process of leaving the building and, ultimately, extending his life. One of the most common and in-demand structures can be considered to be placed the facade of various compositions, which can be coated in the desired color or to have staining subsequently. Currently, two types of plasters - mineral and polymeric, and the latter have the greatest number of advantages in the exterior decoration of buildings of any purpose.

Acrylic plasters for the facade - Easy application, excellent result

Acrylic decorative plaster It is just an ideal finishing material for newly rebuilt houses, which during operation still give shrinkage, which often leads to the formation of small cracks in the walls of the building. If the facade at this stage is plastered by the mineral composition, a web is inevitably formed on its surface, a web is inevitably formed, which spoil the appearance of the house.

This option of events is completely excluded if acrylic plaster has been used to finish, which has such advantages as:

• high degree of elasticity, which eliminates its cracking in the process of long-term operation;
• high degree of resistance to sharp temperature differences;
• forms a vapor-permeable coating that does not prevent natural air exchange;
• high degree of adhesion to any mineral grounds (concrete, brick, etc.);
• the dried composition practically does not absorb dirt and dust, while maintaining the facade is clean;
• simple care - it is enough to rinse the facade with water from the hose;
• the ability to calf (computer or self) in any color.

In addition, it can be applied in the base color, and acrylic will subsequently suit facade paint By plaster, which is also koring at the request of the owner of the house. To the main disadvantages of the material include the impossibility of plastering facades, insulated mineral wool, as well as some complexity of the application process itself, since acrylic facade plaster should be applied immediately to the entire surface of the wall (for 1 day), since otherwise minor differences in the color of the coating are otherwise possible.

Unlike other species, acrylic facade plaster for external work allows a tinting into rather intense, saturated colors, since it allows the maximum amount of coloring pigment to the composition.

Competent surface preparation, as a pledge of excellent result

When using acrylic plaster for outdoor work, it is important to properly prepare an existing surface. This will allow not only to create a high-quality surface, but also to facilitate the process of applying the composition. The preparation process, as a rule, does not occupy a lot of time and financial costs, especially if the facade is being prepared for plastering just a rebuilt building.

In order for the plaster polymer acrylic to hold on the basis of firmly and for a long time, it must be carefully cleaned from all types of pollution, especially oil spots, bitumen drops, etc. It should extremely carefully examine the facade to identify foci of fungal lesions (molds). If they are presented, the processing of special antifungal compositions is required, after drying, the entire surface should be treated with acrylic primer. At the same time, if the base is old and loose, the soil is applied in two - three layers, with an intermediate drying of each of them at least 1.5 - 2 hours. After that, you can proceed directly to shtacking.

Application of acrylic plaster with their own hands

Despite some nuances of working with ready compositionThe question of how to apply acrylic decorative plaster practically does not occur, due to the relative ease of the whole process. Working with this solution is most preferably in not the most sunny day, so as not to force the process of drying it. If a varied composition is used, it is immediately necessary to determine the wall of the building, which can be easily placed in one day, without long breaks in operation.

In that case, the standard, smooth surface on the facade is undesirable, and the owner of the house wants to highlight its structure, acrylic decorative plaster Cereshk Ceresit CT 60 can be used, having all the advantages of the facade acrylic plaster, due to the presence of a filler from the marble crumb of a certain fraction, it allows Make a textured surface of the type "Coroed". Acrylic decorative plaster Coroed is applied almost as well as the standard option, with the only difference - after applying it is maintained by a steel grater. Making circular movements can be obtained a clearly pronounced pattern, and its final appearance will depend on the movements of the grater.

Tip! The pebble plaster is better to smoke in the right color immediately, since it is rather difficult to cry with a rope surface with a brush or roller rather difficult, a paintopult will be required.

Acrylic texture plaster Cerezit, after drying, forms a vapor-permeable and sufficiently elastic coating, reliably protecting the facade of the building from adverse atmospheric influences. It is worth remembering that after applying, the acrylic plaster Coroede needs to protect against the direct impact on it with sunlight, for which it is desirable to sharpen it with an awning / protective net for 1-2 days. It is also undesirable to moisturize in the process of drying. In addition, the plaster Decorative Acrylic Kameshkaya can be used in the design of the walls of corridors, kitchens, loggias or terraces.

Acrylic plaster - outside and inside the building

Acrylic decorative plaster is appropriate not only to protect the facade. Some of her types are used to create chic interior interiors. For example, acrylic Venetian plaster allows you to quickly create surfaces, imitating palace decors of antiquity. Acrylic plaster for internal work It can be used on any bases (plasterboard, concrete, plastered surfaces). Due to its high ecology, it can be used in any room at home, including children's rooms, and how to apply it on the wall independently on the video.

Tip! In the absence of experience with the Venetian plaster, you can pre-process a slight section of the wall or to apply it to a piece of plywood or chipboard - in this way the principle of creating a pattern will be understood.

Despite some difficulty in applying, the process of finishing the facade acrylic plaster is possible in a machine method - when using special systems, the plastering process is not only significantly accelerated, but also significantly increases the tensile strength of the plaster with the base. Such an effect is observed due to the fact that the composition is ejected to the wall of the building under significant pressure, penetrating the smallest pores and cracks. Machine can easily process large-size cottage for one working day.

Frequently often owners of households doubt what kind of mineral or acrylic plaster will be more appropriate, practical and durable. It is quite difficult to give an unequivocal answer, since mineral (for example, cement) plaster has fewer restrictions on the quality of the base, can be applied at a negative temperature (moderate), and the cost of such material is significantly lower. But the cement makeup will not work out, because it has a dark initial color, and it will be necessary to persuade after application. For this, the acrylic paint is suitable for external work on the plaster, which is pre-added the desired shade of the pigment.

If we talk about what plaster is better acrylic or silicone, the last option will cost more, but it is silicone composition that allows you to enter various fillers, thanks to which you can experiment with the surface, independently creating the necessary texture, for example, "fur coat", lamb " etc. Silicone plaster can also be initially smoked, or painted after applying it to the base.

Acrylic plaster - perfect choice For those who seek to save on the finish and insulation of the facade. These mixtures are made on the basis of acrylic resins, which allows to obtain a durable and durable coating. The warranty period declared by manufacturers is at least 15 years. But to achieve such indicators, it is necessary to choose correctly and apply the finishing composition.

Characteristics and features of acrylic plaster

Acrylic plaster is a water-dispersion mixture ready for use. This material includes about 10 components, the main of which is acrylic resin. It is it that provides (after its solidification) the strength of the mixture applied to the walls.

The finishing materials market pleases an abundance and a variety of plastering mixtures. Acrylic is distinguished from the total mass of what has several significant advantages:

• affordable price (more than mineral mixtures, but significantly cheaper than silicone and silicate);
• excellent vapor permeability;
• moisture resistance;
• frost resistance.

When choosing the composition for finishing the facade, it should be understood that there are no universal solutions. The brand and manufacturer of the mixture are chosen depending on the operating conditions of the building and the tasks that the finishing material must solve in a particular case. Due to the wide range of acrylic mixtures, you can pick up the composition for any conditions:

• from high humidity;
• with a significant amplitude of daily and annual fluctuations in air temperature;
• with a high level of dust formation;
• with the abundance of hot sunny days.

Acrylic plaster is characterized by high impact resistance and has the property to repel dust, which allows using this finishing material in industrial areas with a sufficiently high level of air pollution. A distinctive feature of acrylic surfaces is that they are a jet of water from the hose. Therefore, the facade care is quite simple.

Specifications of plaster mixtures based on acrylic resins

It is impossible not to note the advantage of acrylic plaster, as its elasticity. Due to this property, the composition is easily applied to any surface: from wood, bricks and stone, foam, porous materials (gas block and foam block), fibrous materials (plates mineral wool), OSB panels. Among the plaster distinguish two types of mixtures:

• repair, intended for sealing slots and cracks;
• decorative, designed to create a high-nesthetic facing surface.

Decorative acrylic plaster "Coroed"

Acrylic plaster combines all the advantages of the mixtures listed types. Thanks to the resins included in its composition, it provides a solid protection of the carrying ground. In the complex with fiberglass grids is used to strengthen the walls and other surfaces. The decorative properties of plaster provide the various fillers included in its composition.

Types, brands and manufacturers of acrylic plaster

The same plaster mix can be presented in the market under different names. The name of the composition depends on the manufacturer. As a rule, all the companies for the manufacture of finishing mixtures give their products the name that will be a distinctive feature of this product, his brand. This name often coincides with the name of the manufacturer. For example, the company "Ceresit" produces a wide range of building mixtures, including acrylic-based formulations.

The following stamps of acrylic plasters are most well known:

Video - Characteristics of acrylic plaster

The main classification of acrylic plasters is carried out in two parameters:

• for internal works;
• for external work.

The first differ from the second degree of moisture and frost resistance, the presence of special additives that enhances the protective properties of the finishing material. Acrylic plasters for facade works are widely used in any climatic zones. There are mixtures that can be used for internal and external work with the same success. For example, WEBER-VETONIT, RASK ACRIAL LINE. It consists of three types of acrylic plasters: "fur coat 1 mm", "fur coat 2 mm", "Coroed".

Mixtures of any kind are ready to use immediately after purchase, but if necessary, you can compose the composition and add components that impede the development of fungus and mold. Water-soluble dyes are used to obtain the desired colors.

Features of the use of acrylic plaster

The main problem when applying acrylic plaster is that it will dry pretty quickly. Therefore, it is necessary to work quickly and efficiently. Experts recommend slightly practice in applying acrylic blends before proceeding with the main volume of finishing work.

Obtaining the same plaster mix

When making a pigment, it should be borne in mind that the acrylic plaster mixture after drying loses the saturation of the color, as well as any other composition on water based (eg, water-emulsion paint.). To this you need to be prepared and add a slightly more caloring paste to the mixture than it is required for other types of plaster compositions.

There are color selection programs that allow on the monitor screen to see the result of mixing a certain amount of the coller and plaster. This is the most convenient way to choose the proportion of dyes with a large amount of work requiring the use of several containers with acrylic plaster. The exact pigment dosage will allow to get the same color for all the knees. This software is available at all points of sales of building finishing materials.

Video - Roller Plaster Acrylic Ticiana Fixed

Strengthening the protective properties of acrylic plaster

Acrylic plaster You can give additional properties that will help protect the walls from the effects of moisture and insects. For this purpose, various antiseptics and hydropobicators use.

If the facade is erected from concrete, you can use "Catocid compound".

This antiseptic is effective tool protection from biopration. It can be made in dry and wet building mixtures. "Matthodic compound" is made on a water basis, therefore there are no obstacles to its use with acrylic plaster. To make a mixture of protective properties, it is enough to make 5% antiseptic in it at the rate of the total finishing composition. After that, the plaster is stirred by a drill equipped with a metal mixer.

Pre-priming surfaces

To enhance the adhesion, the plaster to the carrier surface performs priming. It consists in applying special solutions on the walls that improve the quality of the finishing layer.

In order to obtain the maximum effect of the use of primer, choose the compositions (primer and plaster) from one manufacturer. In this case, you can be sure that all the components of these materials will be perfectly chosen to achieve the best result.

For acrylic plasters there are no special primers. Use those that are suitable for processing external walls From a specific type of materials. If the facade is brick, it will take the composition for working with brick, if wooden - with wood. On the purpose and properties of primer, you can learn from the information placed by the manufacturer on the container with the product.

But for works with acrylic plaster mixtures, the following soils are recommended: "Facade-soil", "Proacryl-Soil", "Proacryl-Contact", "Acrya Grunt".

Facade of soil - Water acrylic soil for facades and walls

All of these compositions can be applied to the walls using a painting brush, roller or sprayer.

Methods for applying acrylic plasters

There is such a category of acrylic plasters like thin layer. These mixtures are intended for manual creation of decorative facing surfaces. The thin layer compositions have unsurpassed plasticity, they are easily applied quickly. To obtain thicker layers, machine application is used. In this case, dry mixes are needed, which are bred by water in the desired proportion.

Three types of cars are popular in Russia and neighboring countries: PFT, Putzmeister and Kaleta. These aggregates can be equipped with bunkers of different capacity: from 50 to 280 kg. The package includes a compressor, hoses for supplying a mixture, working pistols. There are multifunctional devices that can work with different types Mixtures, regardless of the size of the filler included in their composition.

But the use of specialized cars does not exclude the need for manual work. After spraying on the walls of the plaster layer, it is aligned with a cell or spatula. If necessary, use tools to obtain a textured surface.

Application of acrylic plaster mechanical method

The facade finish is a significant amount of work. Therefore, for the design of large buildings rationally use special technique. Such an approach will help to complete the finishing works much faster than with the manual method of facing the facade.

The first thing you need to do is choose the right plaster mix. It must contain special hardeners and additives that ensure the crack resistance and strength of the layer. Among such components:

• acrylic resins;
• silicone;
• fungicides;
• liquid glass.

With the machine method of application you need to know the rules for the preparation of the mixture and work with the equipment. Therefore, when this way, the facade is traditionally invited to the brigade of specialists who are familiar with all the nuances of this technique of facing work. But in the presence of desire and necessary equipment, You can perform this task personally.

First of all, you need to remember several rules.

1. To apply a plaster layer, you must choose this size of the area so that there is no need to move along the wall with the gun included.
2. Work starts from the corner of the building.
3. Before starting work, several trial application performs, thereby checking the performance and possibilities of equipment.
4. The thickness of the applied layer depends on the speed of moving the pistol. Therefore, all movements should be uniform and smooth.
5. The pistol jet should be directed perpendicular to the wall surface.

Before proceeding with finishing work, the facade is prepared. If there are cracks, they are cleaned of dirt and dust, remove all small particles.

Pairing places different materials (for example, bricks and concrete) are reinforced and protected by the reinforcement by the construction mesh with a cross section of 1x1 mm. The grid is fixed with a cement-sand or adhesive construction mixture.

Next, proceed to priming walls. Choose the most convenient tool for work: roller, painting brush or sprayer (paint). The process of priming is simple and simple: the wall is covered with a layer of solution, trying to fill them all the pores and cracks. If the surface is complex, the second layer of primer is applied. This is done after complete drying of the first layer. The required time interval can be found from the manufacturer's instructions.

Order of work

Step 1. The apparatus for applying plaster is connected to the water fence point. If there is no possibility of connecting to a centralized network, a large water container is used.

Important moment: water should be clean. It is undesirable to use technical fluids, as this will worsen the appearance of plastered surfaces.

If various salts and chemicals are in water, they can join the reaction with substances included in the dry mixture. This may lead to the lucid composition of its properties: plasticity, frost resistance, crack resistance.

Step 2. The desired amount of the mixture is poured into the bunker (this information is in the manufacturer's instructions).

Step 3. Pullen the required amount of water, include the device and prepare a solution.

Step 4. Hold a gun at a distance of 20-30 cm from the wall surface, turn on the device.

Step 5. Send a jet on the wall and move the gun along the workspace.

Step 6. After one bar of the plaster layer is applied, proceed to apply the second. Thus, the wall area is plastered.

Step 7. After the plaster almost completely freezes, they are trimming irregularities and influx. This is done using a rule or spatula with a wide metal blade. The tool is pressed against the wall and pressing on it, lowered down.

Step 8. Wet the surface with water and perform the grout of the aligned layer. To do this, use a spatula or celma. It is possible to block the wall using a painting brush with an elastic bristle. Regularly wasting the surface, the finish alignment of the walls perform circular movements.

Video - plaster wall machine. PFT wall shocking machines

Application of acrylic plaster manual

All work performed at a positive air temperature (not lower than + 5 ° C).

Step 1. Preparation of walls.

If the facade has an old finishing coating, it is removed. The walls must be clean enough, not to have heighters, moss, mold. If there are stains from oils or flammable liquids, make a wash with water, into which special substances add: detergents.

If on the walls of the mold, perform the processing of the facade by means that prevent its formation. An excellent choice is a septobud antifungal agent 1008. Before you put it, take a rigid brush or scraper, clean the wall. After that, it is thoroughly washed with a jet of water from the hose.

If there are cracks on the walls, close them with a cement-sand or putty-repair mortar. If the carrying surface is continuing and there are wide cracks, the fiberglass mesh is witched. With shallow and non-strokes, cracks can be used by putty-leveling compositions.

Step 2. After drying the repair layer, proceed to priming surfaces.

Step 3. After drying, the primer is plastered. The composition is applied to the wall with a spatula or stainless steel grater. If acrylic plaster with filler, the thickness of the layer should not exceed the twice section of the grain. If the filler is fine, the layer thickness should not exceed 8-10 mm.

In order for the surfaces to be observed in color and structure, it should not be interrupted by more than 10 minutes. If the facade area is large, it is divided into several fragments that are plastered alternately. In order for the mass to be homogeneous and had one color shade, new portions are added to the bucket with a mixture, which are thoroughly mixed with residues.

During work, they seek to prevent the mixture into the eyes and organs of breathing. If necessary, use safety glasses.

To give the surfaces of a certain pattern, textured rollers, stencils, brushes with rigid bristles are suitable.

One of the most simple ways Decorate the facade - the wave-like hand movements to make on the walls of the relief in the form of waves. Many acrylic plasters are textured, that is, they themselves create a decorative surface. To obtain it is sufficiently proper application and equalization of the composition.

Video - Application of acrylic plaster

Acrylic plaster is a mixture for finishing works based on high molecular weight polymers (acrylic resins). Thanks to its constituent, this type of plaster has acquired the corresponding name. This finishing material is used for external, as well as internal works.

Comparative characteristics of plasterers.

Today, in the building materials market, acrylic plaster for external work successfully competes with silicone, silicate,. Each of the listed mixtures has its advantages and disadvantages:

Mineral facade plaster.

Produced on the basis sand-cement solution in dry form. Before starting work, the plaster needs to be diluted with water, and then knead. Its main advantages:

• Low price
• Parry permeability (can be used both with foam and cotton)
• Easy application
• Non-calamity
• Strength, resistance to erasure

Disadvantages:

• DISTRIBUTY (up to 10 years)
• The impossibility of the mixture itself (is released only in white color)
• Additional time for the preparation of plaster
• Instability to mechanical damage (inelastic)

Silicate facade plaster.

It is made of liquid potash glass in the finished form. Her advantages:

• High vapor permeability (used mainly only when insulating basalt wool, it is not recommended to use with foam)
• Dust rejection
• Long term (20-25 years)
• Elasticity (does not give cracks)
• Possibility of cleaning and washing

Disadvantages:

• High drying speed (only an experienced specialist can work with this material)
• The need to use special silicate primer, which significantly increases its value
• Scooty color gamma

Silicone facade plaster.

Perhaps the most technological material today, since it is based on silicone resins. Benefits:

• High vapor permeability
• Elasticity
• Durability (25 years)
• Resistance to water
• Possibility of cleaning and washing
• High levels of shelterness
• Self-cleaning under the influence of precipitation
• Easy application
• Opportunity to compose
• Collapsed with all materials

Disadvantages:

• High price
• The need to use special silicone primer, which further increases its value.

Acrylic facade plaster.

It is an already finished water dispersion mixture. In order to start working with her, no additional manipulations are required. Acrylic plaster for the facade is used mainly in a tandem with foam.

This is due to its low vapor permeability. The service life of this material is from 15 to 25 years. Acrylic facade plaster is pretty elastic, because it will help to hide small cracks on the facade, and will also prevent the emergence of new ones.

In addition, it will protect the building from water, mold, green and white Nalea. Acrylic facade plaster for external work has a high degree of clutch with all mineral bases.

The choice of flowers of such a material is great and can satisfy even a very selective buyer.

Acrylic decorative plaster is quite simply applied to the wall, even unprofessional can cope with it. It dries quite shortly: in comparison with mineral - 3 times faster.

If we talk about the disadvantages of this material, first of all it is worth noting its flammability. Also this species outdoor decoration inclined to attract dust and get enough to get dirty. However, all dirt can easily wash off with water.
Situating, we can say that for fast, high-quality and budgetary wall decorations outside with foam the ideal option It is acrylic plaster for the facade.
Concerning interior decoration houses, the most popular for these purposes are cement, plaster and acrylic decorative plaster.

1. Cement plaster - cheap and easy-to-use material providing additional heat and sound insulation. However, when working with it requires preliminary and subsequent processing. In addition, this is the most dirty finish.
2. Plaster plaster - inexpensive and easy to use material that allows you to achieve a certain smoothness of the surface. His great drawback is the fear of moisture and destruction under its impact.
3. Acrylic decorative plaster Refers to the natural form of finishes, with which you can create a unique interior with any pattern and texture. It is distinguished by low cost, durability and long service life. Use it as the final stage in the form of decor.

Application:
As mentioned above, acrylic plaster is used both to finish the walls inside the building, and outside (the stucco acrylic pebble is suitable for those and other purposes). The surface treated with this material does not require additional finish operations.

If you wish, it can only reveal the paint of the required color. For exterior trim, as a rule, acrylic facade paint by plaster is used.
Acrylic plaster for outdoor work is often used in regions with a high level of precipitation, as it is not afraid of moisture. It is not recommended to use this type of finish near the dusty roads because of its inclination to attract dust to itself.

It is also undesirable for houses in an open area, where the walls are constantly under the influence of sunlight. Over time, this can lead to blown color.
Acrylic plaster for internal works is perhaps one of the most aesthetically attractive and environmentally friendly finishes. This material is quite practical and easy to use.

Acrylic decorative plaster allows you to achieve an ideal visual effect and create unusual elements Decor.

Technology of work.

Outdoor work.

Before applying acrylic facade plaster, the surface must be prepared: remove old coating or paint, clean from dirt and fat stains (degreasing means), to progress the substance suitable for acrylic. To work with this material, you will need only a container for it and a spatula.

Attention! When working with acrylic mixtures, it is necessary to cover the body and eyes. It is advisable to use protective masks or glasses. If the tool by chance falls into the eye or on an open area of \u200b\u200bthe skin, it needs to be thoroughly rinsed with water.

If the mixture is in a dry form, it must be divorced, but only in such a quantity that will be needed for small plot Work. This is due to the properties of acrylic plaster to quickly push.

Therefore, it is necessary to divide the entire perimeter of work into several sections. It is also desirable not to do long interruptions between application. If I had to stop the work, and after a certain amount of time, the edge of the applied solution was frozen, it can be cooled to moisten with water.

It is also allowed to wash off the water unsuccessful not yet dry a layer. For the same reason, it is not necessary to perform work on a rainy day, and it is undesirable to enter moisture on the back surface to its complete drying.
You can apply stucco with a plastering machine.

This method is applied by construction companies for large objects. The plastering machine causes a solution to the surface at times faster and at the same time saves its number. The savings are due to the fact that the device constantly mixes the mixture and additionally enriches it with oxygen. Therefore, the solution becomes more lush and increases in volumes.

In addition, the amount of the sprayed mixture is distributed evenly along the wall. Also when working with a plastering machine for leveling, you can also use a spatula, but for example a rule. This significantly affects the smoothness of the surface. To work with such a machine requires 1-2 people.

After complete drying, the surface can be left in this form, and you can cover acrylic paint For external work on the plaster.

Internal work.

Acrylic plaster for internal work is applied by the same principle as the front, only its layers may be somewhat (as much as the designer idea requires). To achieve the desired effect at the end plastering The surface can be covered with paint, wax or special varnish.

Consumption.

It is necessary to know exactly the flow rate of finishing material in order to navigate which amount will be required for certain purposes, and what will be the final cost of plastering work. Here are approximate figures for all types of plaster:

• for acrylic facade plaster Consumption per 1 m2 will be 1.5 kg;
• for gypsum flow per 1 m square. equal to 9 kg with a layer thickness of 10 mm;
• for cement flow per 1 square meter - 16-18 kg with a thickness of 10 mm;
• for dry - 1-1,5 kg;
• for Venetian - 80-200 g;
• for textured - 1.3 kg;
• for the kororad - 2.5-3 kg (layer in 1 mm);
• for limestone - 1.5 kg (1 mm).

Examples of use in the interior.

Acrylic plaster can be used in the interior of any room (with a standard level of fire safety). This finish is very good for bathrooms and other rooms with high humidity. Therefore, it can be used instead of a tile for all walls or as individual elements Decor.

Any entrance hall can be transformed with the help of decorative acrylic plaster. Moreover, its versatility allows it to fit into all styles: classic, modern, antiquity. Professional creators can perform unique elements of the interior and even whole pictures on the wall with this type of finish.

Price policy.

The cost of acrylic plaster will depend on its purpose, textures and manufacturer.
Here is the estimated price for the most popular brands of acrylic plaster:
Acrylic decorative plaster Cereshkin Ceresit CT 60 25 kg - 1300 - 2000 rubles.
Decorative Bolloss 25 kg - 600 - 1200 rubles.
Cherssel Coroed 25 kg - 800 - 1400 rubles.
Kraisel Stucco Acrylic Kameshkova 25 kg - 1100 - 1600 rub
Before buying an acrylic plaster, you need to calculate the required amount, based on the flow and state of the surface being treated. The more discrepancy in levels, the thicker will be a layer, and accordingly the consumption of material.

Views:

According to the type of application, the textured, structural and Venetian plaster is distinguished. Here are the main characteristics of each of them:

1. Textual acrylic plaster Different with highly viscous coarse structure. This feature is due to its fillers: marble or granite crumb, small particles of stones, mica, wood.

This finish is applied to outdoor and internal work with concrete, wooden, brick or plastess surfaces. It does not require special preparation and can independently hide even large gaps. The larger the grain of plaster, the bigger will be its consumption.

Ultimately, you can get a surface, imitating stone, wood, leather or textiles. It is applied quite easily and does not require professional skills.

The main subspecies of this finish:

• Coroed - His furrows look like a tree eaten by beetles.
• Barashek - It has a rough surface with grains of the same magnitude.
• Shuba - Differs with a rough surface with a small pile effect.

2. Structural acrylic plaster It is created with the additions of marble crumbs and quartz particles. This finish has either a smooth surface or more embossed depending on the grain size. It is used indoors or outside with plasterboard, with chipboard, or with mineral bases.

3. Venetian acrylic plaster - The thinnest and refined species created on the basis of marble crumbs and groomed lime. For the price, this is a pretty expensive material, however the beauty of the final result is worth it. As a result, high-quality imitation, onyx or precious materials are obtained.

Such plaster is applied in several layers with thin strokes on a thoroughly reinforced, covered and primed surface. Due to the thin-layerness of this material, all the listed processes are mandatory, otherwise it is possible to be simply spoiled. In addition, it is possible to use it only for internal works.

For the qualitative application of Venetian plaster, professionalism is needed and rich experience in working precisely with this material.

For the decoration of the walls, a person came up with many different materials, among which plasters are allocated in a separate discharge - there are many of them, and among all this diversity there is such a group of materials as acrylic plaster.

This is very interesting materialwhich compared to other compositions of this purpose is distinguished by mass unique properties. Among them, you can find those that allow it to be used for external and internal work - it can be said that this is a universal plaster, which, thanks to one or another additives, can create structured surfaces of any type and texture. Together with the site, the House of Dreams we will deal with the varieties of this material, study their features, get acquainted with the advantages and other important things related to acrylic plaster.

Acrylic Stucco Facade Photo

Acrylic plaster: what it consists of

Acrylic-based plaster is an artificial, synthetic material made on the basis of acrylic resins - precisely they, after their solidification, give the finished surface the main set of qualities, so appreciated by people and builders. In addition to the resin, the decorative acrylic plaster in its composition contains three more important components.

Despite the fact that the structural acrylic is completely synthetic material, it is still referred to as the discharge of environmentally friendly finishing materials. It is practically no shortcomings.

Advantages and disadvantages of acrylic plaster and its secret of popularity

As mentioned above, the disadvantages of acrylic plaster are very small. By and large, they include the whole couple of moments - this is a high cost and a countertileness. After hardening the film formed on the surface almost does not miss the moisture pair - as they say, the walls do not breathe. As a result, a number of restrictions related to the use of acrylic plaster appear.

For example, if we talk about the finish of the facade by this material, it is extremely recommended for its use, if it was externally used using dense stone mineral wool. This is perhaps the most significant drawback of acrylic plaster - you can also add a relatively weak stability of the material to the ultraviolet. The result of the statics is attracted to the surface of dust and garbage - almost all types of acrylic plaster are rapidly contaminated, and the surface has to be washed more often than usual.

Acrylic Structural Plaster Photo

But not everything is so bad, as it may seem at first glance. In acrylic decorative plaster there are a number of positive moments - they are more than flaws, and that is why acrylic plaster received a ticket to life. The advantages of this material include the following.

1. The strength of which can envy any other type of plaster. The acrylic surface is very difficult to damage any objects, if, of course, it is specially not to beat with a hammer or other objects.
2. High resistance to abrasion. It does not appear, with friction, no spots appear on it, it does not peel and generally serves for a very long time. With proper applied, the warranty on the trimmed surface can reach several tens of years.
3. Acrylic facade plaster reliably protects the walls of the structure from atmospheric moisture - with such a defender they nor the snow or rain nor other atmospheric precipitates.
4. Acrylic plasters are non-combustible material. Moreover, it is able to protect from ignition even with such flammable materials such as foamed polystyrene - that is why plasters of this type are recommended for using foam insulated.

And this is still far from all the advantages of acrylic plaster. Additionally, a number of higher factors can be noted, which are designed to facilitate the work with the material: first, it is the absolute preparedness of the compositions for applying to the surface (semi-finished products such as dry mix here), secondly, simple application technology (decorate the surface of acrylic plaster can Even an unprepared person). It is these advantages that in most situations overlap all the disadvantages of the material allowed acrylic plaster to take a worthy place in the construction and finishing materials market.

Types of acrylic stucco photos

Varieties of acrylic plaster: appointment and features of species

Acrylic plaster is a very extensive group of materials. Based on the aqueous dispersion of acrylic resins, a wide range of materials with various purposes that need to be known at least in order to determine the choice correctly. You can classify all these materials in several signs.

And these are only the main varieties of decorative stuckers based on acrylic. In addition to them, each of the species described may have a mass of subspecies - for example, the facade plaster may differ in size (fraction) of the filler. If we talk about acrylic plasters for internal works, then besides the fraction, they may differ in the picture, due to the uniqueness of which they receive a personal name.

Application of acrylic plaster: general principle of work

Almost every kind of material of this type has its own personal features of application. But despite this, the overall concept of performance scheme remains.

In general, it is very easy to work with a material of this type - at least much easier than with plaster on the other basis. In this regard, acrylic plaster will give odds to almost all other materials - the exception can be permanently produced on the principle of dry building mixtures, and not completely. The compositions of this type need to be prepared, apply according to the instructions, and then paint - such a statement of the issue scares many brave points that set the purpose of independent application of decorative plaster.