Our company "LSTKSTROYGRUP" offers to your attention ready-made projects based on the frame from LSTK. If you are not ready to independently develop and think over the future building, you can get acquainted with our offers and buy something from our finished projects. This may be the structure of large or small sizes, which will be based on metal carcass from the thermopropille of galvanized LSTK (light steel thin-walled structures) and finishing with high-quality materials suitable in one way or another.

First of all, we always focus on the wishes of our client, so if necessary, can recommend any option for a residential building for purchase. The basis for our recommendation will, of course, supplied by the customer the conditions. If you are sure that you cannot pick up any of the options presented on our site, we suggest to leave a request for our designers.

Thanks to the experience of our specialists, according to your application, create individual project Fast-based building ( a private house, industrial building), as well as produce metal frames from thermophile. It is also possible a full cycle of construction from the design of a quick-scale building to the turnkey "turnkey".

Catalog of prefabricated houses

When building a residential building, we suggest immediately think about other buildings - such as a garage and a bath.

Garage 6x4 m. Double Roof Type 3	Garage 6x4 m. Single Roof Type 2	Garage for 3 cars - 60 sq.m.	Garage 6x4 m. Single Roof Type 1
	Bath - 29 sq.m.	Bath - 36 sq.m. (6x6)

Production of prefabricated houses

Not everyone wants to buy a project, which was most likely already installed anywhere else. This is especially true for residential country houses. If you do not want to buy residential buildings presented in our catalog, we can offer you to contact our designers. Based on the LSTK, they will be able to construct a frame for you, which will continue to be a full-fledged country house.

What will be the features of our offer? Our specialists work qualitatively and always take into account the main wishes of customers. We do not present possible operation For any other conditions. It is customer-oriented that allows us to create excellent residential buildings. Each element has been worked in them so that no inconsistencies occur in the construction and construction process.

Therefore, referring to our planners, you can count on successful production and completion of construction. Adequate recommendations on use building materials Inside the frame from the LSTK will provide you with a durable structure. However, you can count on durability and when choosing our typical finished buildings. LSTKSTROYGRUP company guarantees you their quality, independently checking each framework for compliance with all standards and rules. You no longer have to search where you can order a finished building or layout of the next building for the desired parameters. Our company will provide you with everything you need for pleasant life In the country (or urban) terrain.

Our specialists with the shortest possible time will provide you with structures from light steel thin-walled structures, will report required materials and components on your facility. Only a worked project can cope with any task assigned to him, and our company will do everything to ensure that your object is the result of this project.

Advantages of prefabricated houses

Frameless build-up houses built using modern LSTK technology (light steel thin-walled structures) have a number of undeniable advantages:

	Minor weight In mind the minor weight of the enclosing structures ( outer walls) Do not require costs for enhanced foundations. Such structures without fear can be mounted on burbilling, screw piles Not afraid of shrinkage and "swelling" of soil. The distance between the soil and floor partition of the house can be used to store the garden inventory, building materials are not subject to temperature changes, etc. Also enough finely breeded foundation with painter.
	Building time The speed of construction is significantly reduced, due to the absence of lifting equipment on the construction site (during the construction of private houses). The metal frame of a quick-scale building up to 150 square meters will collect as a team of experienced specialists in the amount of 2 people, and not experienced specialists in the number of three people, a maximum of seven days. It is first necessary to learn the project of the KM stage (it is the main instruction for assembling the metal frame from thermopropil), which will not take much time.
	Ensuction of narrow-controlled specialists During the construction of prefabricated buildings, there are no work of such specialties as: bricklayers, carpenters (for the construction of a rafter system), etc. Metal frame is delivered directly from the factory, all thermopils have a proper size in accordance with the project and do not require "fitting" at the place.
	Cost of construction Prices for prefruitable buildings (metal frame) are much lower than other technologies. Many argue that wood frame is cheaper. When delivering to the construction of lumber - yes, cheaper. But when the customer begins to hire experienced specialists for the assembly, he understands that it is not at all cheap. It is required to keep the material into the appropriate size, purchase metal corners for complex load-carrier nodes. With this, the consumption of funds begins. Few people paying attention to the right antiseptation of wooden frames. According to construction standards, antiseptication is required every three years, and this is an additional consumption of funds for the purchase of appropriate products and payment of labor.

These are just a few examples of the fact that the construction of prefabricated houses with the use of modern LSTK technology is less labor today and will allow you to save a significant amount of money. You can learn about the rest of the benefits of houses on the basis of metal frame from a galvanized profile by calling the specialists of the company LSTKSTROYGRUP or sending your questions to the company's email.

Stages of building fast houses

• Laying the foundation.
• Assembly of metal frame.
• Arrangement of engineering systems.
• Finishing.

You can see detailed information on all stages of construction.

If you did not find the desired structure or the desired design on our website, you can send an application and our designers will call as soon as possible.

The construction of a frame house has several advantages. Building such a house can be quickly, economical and efficiently. Metal frames are more lung and durable, have increased fireproof. Heated houses based on metal frames have high energy-saving properties. Mounting a metal frame has its own nuances that need to be considered during construction.

Advantages of a metal frame house

Metal frames possess some indisputable advantages over wooden. One of its main advantages is a relatively low price. Usually the price of turnkey frame depends on the selection of the material from which they are collected from being made from the fastener method used, from the cost of assembly work.

Metal carcass

Metal frameworks are made of steel, which is reflected in their second name. These products also refer to the LTK, which is deciphered as light steel thin-walled structures.

Another indisputable advantage of such a frame is its strength and ease. These frames weigh less than others, but much stronger. They are able to withstand high and heavy buildings.

Metal frameworks are manufactured in factory conditions with a preliminary preparation of a project in which the dimensions of all elements are fixed. In these elements you can arrange hidden wiring. Since they are made of steel, they have increased resistance to fire and are not subject to corrosion.

The main properties of light steel thin-walled structures

Features of assembling houses made of metal

The LSTK technology was developed in the last century. Metal frames are built from a profile having a slot. This allows you to avoid the occurrence of cold bridges inside. The tasks of thermal insulation and sound isolation can be solved using modern insulation.

In structures with a metal frame, a special value is paid to the installation of a layer for steam, hydro and thermal insulation. This is due to the fact that in them the dew point is located inside the house. For this reason, it is also necessary to competently make the wind protection. Moreover, it is necessary to make a system of ventilation between the layer of external waterproofing and insulation. It can be done with your own hands. This will contribute to the rapid output of moisture. In homes of this type, the organization of competent electrical protection is needed.

It used to doubt the use of metal as a frame. This happened due to its increased thermal conductivity. This problem was solved using galvanized metal profiles with perforation. The holes are filled with insulation, which reduces the level of thermal conductivity. This indicator also affects the thickness of the walls. Therefore, the reviews from such houses relate to insulation issues.

One of the problems with which you have to encounter in the construction of such houses are their increased electrical conductivity. However, it is solved by competent grounding.

What to choose a foundation for a metal frame home. Will it differ from a wooden skeleton?

The foundation on screw piles is suitable for the metal frame

Unlike the foundation under the house with a wooden frame, while the LSTK is erected there is no need to build a massive base. Such a house is light enough and does not need a massive foundation. The developer will not have to engage in voluminous earthworks, it is also not necessary to build formwork, two meters high, mount solid waterproofing. They can be built on any type of soil. No construction of a ribbon foundation is required.

After analyzing the properties of the soil, you can choose the type of foundation for your lung house. An excellent option can be the columnar foundations, screw piles.

Metal Frame Mounting Technology

When mounting a frame, you need to create spatial blocks, flat frames and to strengthen them as much as possible.

In the process of installing a metal frame, it is necessary to take into account the properties of the material. It is necessary to ensure that it does not damage it in the process of transportation. During the installation, it is necessary to strive to create spatial blocks, flat frames and to strengthen them as much as possible.

During the preparation of the foundation, transverse risks are applied to it, which must correspond to the axes of the future frame, supporting surfaces and the location of the anchor bolts. With the help of anchors, it will be possible to adjust the inaccuracies of the installation.

Compounds of metal beams can be not only bolted, but also welded. The frame itself consists of lower and upper strapping. There is also a connection between them. It is necessary to design the door and window loops in advance, a metal cut.

1. The profile is cut to the desired size;
2. If necessary, bent at a predetermined angle;
3. The resulting details are welded or fasten with bolts according to the scheme.

There are three options for enclosing structures:

1. Polystic assembly;
2. Cassette profile;
3. The use of sandwich panels manufactured at the factory.

The choice of materials, to install these enclosing structures, occurs on the selection of customers. See photos in the photo.

Outdoor finish at home

It is one of the most important steps. The type of finishing is determined by the Customer and can be performed using various materials:

1. If you want to do a budget option finishes, it makes sense to use vinyl siding, block house, mount ventilated facade and other attachments of mounted type;
2. If you make a finish with plaster, then the house will impress the Mediterranean cottage;
3. Democratic prices and simplicity of laying attract those who use different panels that have the type of natural materials;
4. Finishing with tile, natural and artificial stones It looks very impressive. The house becomes similar to a solid and expensive, but at the same time retains all the advantages of the metal framework.

Video

Look at the video lesson for the construction of metal frame houses.

The construction of buildings on a metal frame was practiced for a long time, but built mainly manufacturing and technical premises, shopping centers buildings, etc. Application in private house-building was limited to high thermal conductivity of the metal: heating accounts would be unreal. Manufacturers solved the problem by making the so-called thermopropille, which in a pair with modern insulation allow you to get warm house. If you need an inexpensive, reliable house, which is built in a short time, may be suitable for a metal frame home. It has low cost - twice lower than the brick, the assembly occurs quickly, the service life of the factory frame - 70 years.

The technology is very plastic: you can adapt to a metal frame any favorite house. First, the framework of the framework is compiled, the type of finishing materials is determined (only your wishes are affected). Next, the designed project processes a special program that breaks everything into the components, gives a list of elements with all parameters. Profiles of the required size are manufactured and marked, binds to packs, packaged, delivered to the construction site. Briefly, this is the entire technical process - from the development of the project, before the start of assembling the frame house from metal profiles.

Advantages and disadvantages

This technology is increasingly popular in European countries (including northern), in Canada and America. And all because the steel does not rot, it does not eat insects. Metal frame structure weighs several times less at home From wood (twice), and even more so, it is easier for brick houses and other similar materials. The small weight of the building is less foundation costs, since its parameters depend on the load, which further reduces the cost square meter Buildings. Usually under such houses are pile, or. On average one square area costs 4-5 thousand rubles (excluding the cost of finishing materials).

The technology according to which the metal frame house is being built - light thin-walled steel structures, or abbreviated LTK. Light - does not mean continuing. Houses erected by LSTK technology, withstand the earthquake by force in nine points. But this concerns buildings not higher than 3 floors.

Another advantage of the steel frame in front of the wooden - its strength is enough to withstand heavy roofing materials. If you decide to use ceramic tile - please. Only its weight must be laid when calculating the foundation parameters.

The design of the wall cake is almost the same as that. All difference in the framework used for the framework and the assembly method.

How to be with cold bridges? Manufacturers argue that the problem is solved. Modern thermopropili, from which private houses are building, have cuts, staggered. They interfere with the through freezing of structural elements.

So the picture of the "work" of thermopropille looks like

And at least thermopropili really work, anyway, such a house is colder than. However, the problem can be solved by making high-quality insulation. With the right execution of the "Cake" of insulation with all the membranes (windproof-permeable outside, vaporizolation inside) The metal frame house will be warm and the heating will be left no more than in the so-called "warm houses".

For insulation, you can use any modern insulation - Mineral wools, foam, extruded polystyrene foam, foamed glass, eco-way. Self best features The foam glass is slightly worse in extruded polystyrene foam. But they have a solid price, although the required thickness is several times less than mineral wool. As a result, the insulation costs are comparable.

The most optimal combination of qualities and prices for mineral wool. It is more convenient to work with basalt. She has good characteristics. Fiberglass according to the characteristics is also not bad, but it is difficult to work with it. Slotovat is the cheapest, but it is very afraid of wetting, when it is used, a device of the ventilated facade.

Under the reasons given above, it is most often choosing basalt cotton wool. It is well installed in the frame, has good thermal insulation properties, relatively inexpensive, besides, is a good sound insulation material that for this technology it is important.

What makes a metal frame house

Made elements of the LTK from durable structural steel by the method of cold stamping. The sheet has a protective zinc coating with a thickness of 18 to 40 microns. Some plants make structures from hot-dip galvanized sheets. Such elements are more expensive, but they are more durable.

Sheet thickness from which they are molded from 0.7 mm to 2 mm. The selection depends on the necessary bearing ability of one or another element. There are the following types of profiles.

The most common types are used.

There are also special floor overlap beams and ceiling. Of similar elements is drawn up and slinge system at home. The elements are connected to the bolts, self-tapping screws, riveting, can be used to use contact welding.

Now about the quality of components from different firms. There are about a dozen plants in Russia. All different quality. Therefore, look carefully on the quality of galvanized, the flexible metal. No, even the smallest, traces of rust should not be anywhere. In general, even the best "our" profiles are significantly inferior to imported. It's a shame, but it is.

Order assembly

From the factory, the entire material comes packed in the pack. There is marking on every detail, the same marking is present in the work drawings. The framework of the LSTK house is going as a designer: everything is ready, even stamped holes under hardware. Put the details in place, combine the grooves and install fasteners. Celling the metal frame house is overralling as precious as from wooden bars. If you designate the steps short, everything looks step in so:

The frame of the steel house is ready. It remains insulation I. finishing work. It is a note: no matter how I would like to save, the lamp should also be collected from the metal. The same expansion coefficients are exactly what contributes to the high strength of such structures. When connecting metal and wood, this is not achieving this: fasteners are gradually weakened. This is especially critical in regions with increased seismicactivity. But even in calmer regions from the rattling finish little joy.

Can I build yourself?

If we are talking about collecting the details that came from the factory in one design is something else, but with assistants. All work is to search for the desired detail and install it in place specified in the drawings. At first, it is difficult, then we will get comfortable.

If under the "construction of a metal frame house with their own hands" imply its welding from profile pipeThe fact is ambiguous. If you build a small country house, then there are no questions: the frame can be put on the same principle that the wooden and for one-story building for angular racks is enough pipe 80 * 80 mm, and for intermediate you can take less. But the installation step is still dictated by the insulation: the distance in the request must be 58-59 cm (slightly less than the standard width of mineral wool).

The only thing to remember is: when using the profile pipe, the cold bridge will be required. Then the warming itself will need to do in several layers, overlapping heat leaks, which will solve the problem. One layer is traditionally put in the struts between the racks. The cross section of the profile pipe is far from 200-250 mm, which are necessary for the insulation of the house in the Moscow region (under mineral Wat). Therefore, under the missing layers, the transverse lamp is satisfied (from one or two sides - decide for yourself). It turns out that between the racks the insulation is stuck vertically, and in the crate - horizontally. Hod bridges has become much smaller.

From the side of the room, the insulation closes a vapor insulating membrane (it should not pass moisture into the insulation). From the side of the street on it, a windproof vapor-permeable membrane with waterproofing properties is fixed. It fills the three functions:

• protects against wind
• does not allow condensate or randomly falling in the insulation,
• displays steam from insulation, which still penetrates out of the room (despite vaporizolation).

Only with such a pie and the availability between the outer membrane and finishing materials of the ventilation can be confident that the insulation will not mock. Only in order for the ventzor to work, there are still ventilation holes at the bottom of the wall and an exemplaicly embedded outlet under the roof: the air flow between outdoor decoration The metal frame home and the windshield of the membrane should take place without encountering obstacles.

For inspiration - video on which the process of welding dacha house From the profile metal pipe. Those who can make a metal frame house with their own hands from the pipe will not be difficult.

The cost of building a house from the light steel thin-walled turnkey designs includes a frame budget, a set of finishing and other materials, as well as fees for mounting work. This technology is different short terms Implementation, as well as a favorable price of ready-made projects.

The residential building on LSTK technology is built according to the following principle:

1. Design.
2. Laying the foundation.
3. Assembly and installation of wall panels.
4. Assembly and installation of roofing farms.
5. Roofing.
6. Arrangement of communications.
7. Domestic and external finishing works.

At the design stage, the focus is on the calculation of the rigidity and strength of the carrier frame. The foundation for easy LSTK building can be absolutely any. Wall panels And roofing farms are collected from ready-made perforated profiles made in production from galvanized steel. To cover the roof, traditional materials are used - professional flooring, metal tile, etc.

The foundation wall cake - insulation. Outside it is closed by windproof and facade facing, from the inside - vapor insulation, plasterboard and finishing finish.

Benefits of LSTK technology

Having preferred LSTK technology in the construction of housing, the user receives such benefits:

• low cost of materials;
• compressed construction lines;
• the most favorable price when ordering a turnkey construction;
• flexibility in choosing and individual refinement of projects;
• you can build in any season;
• the house serves over 70 years without repair.

In addition, it is also worth noting the stability of galvanized metal frame to the effects of corrosion, fire, wind gust and seismic loads.

Housing from LSTK: the cost of typical projects

Below is a table with approximate prices for the construction of housing on LSTK technology. Including the opportunity to clearly understand, from which major components there is a budget for the implementation of typical turnkey projects.

More details on the construction of housing from light steel thin-walled structures, you can learn from our company's specialists by contacting them at the specified phone number or by form feedback Online.

Approximate prices for construction of standard housing from LSTK
Total area of \u200b\u200bthe finished house	Features of housing	Cost of metal roll	The cost of the entire set of materials	Turnkey construction cost
90 m2.	One-storey vacation home With four living rooms, bathroom and boiler room.	250 thousand rubles.	1000 thousand rubles.	1500 thousand rubles.
120 m2.	Two-storey cottage with a terrace, two residential Rooms And the bathroom on the first floor, three rooms and a bathroom on the second.	500 thousand rubles.	1300 thousand rubles.	2000 thousand rubles.
130 m2	Compact two-storey house, on the first level two full rooms, bathroom and toilet, on the second - living room, bedroom and children's, as well as an extra bathroom.	460 thousand rubles.	1400 thousand rubles.	2200 thousand rubles.
140 m2	Two-storey country house, on the first floor three rooms plus bathroom, on the second - the same number of rooms plus a balcony.	450 thousand rubles.	1600 thousand rubles.	2500 thousand rubles.
160 m2.	One-storey residential building with an attic, the first floor is divided into four full rooms plus a bathroom, mansard Floor divided into two rooms.	600 thousand rubles.	1800 thousand rubles.	2800 thousand rubles.
Prices provided in the table are purely approximate, more specific data ask our managers.

Houses on a frame of metal products - a new word in the development of framework technologies of construction. We'll figure it out how quickly and with the least costs to build such a house with your own hands.

The construction of a private house today has changed much due to the emergence of new technologies. Wooden frame Allows you to build a building very quickly and provide good performance characteristics. The use of a carcass from metal products for the construction of houses with their own hands is the further development of framework technology. We will deal with what the advantages of this method and how to build such a house personally.

Advantages and disadvantages

The construction technology of buildings on a frame of metal products assumes that all frame elements of walls, overlap, the roof is made of metal. The thickness and form of the profile for each section is calculated separately, based on the test load. This method of building allows us to achieve the following results:

• Reduce weight reduction.
• The speed of construction.
• Reducing the tools required for construction: Since the profile is manufactured in factory conditions, becoming unnecessary drill, a ride of the square, etc.

The frame is filled with insulation panels, which is selected under the conditions of each region. Thus, it is possible to achieve the required performance indicators from freezing. Frame houses are warm and economical: since there is no heat loss, it is possible to significantly save on heating.

Other advantages of houses built on this technology are:

• Easy recycling. An unnecessary structure is not required to break. You can disassemble the house like a constructor, putting the metal frame for the melt. Do not suffer from the environment.
• Durability: Metal does not burn, does not rot, it is practically not deformed from temperature drops.
• Construction can be conducted at any time of the year, without interrupting during the cold period.

Usually frame construction Apply to the erection of small buildings with a height of one or two floors. The height of the walls of such an object is usually not more than 6 m, and the length of the span is about 12 m. The limiter is the bearing capacity of the rafter. Stropyl farms in a length of 24 m and more require the use of a special profile, they are complex in manufacturing and installation.

There are several features that need to be considered when choosing a skeleton house:

• Good thermal protection is turning to be needed in a good ventilation system. The house is essentially a thermos, and without an efficient ventilation system it will be wet. And these are suitable conditions for the development of mold fungi.
• The walls of the frame house will not be able to keep greater weight. They can not hang the shelves or knock the dowel for the painting.
• Although the metal frame and is made of corrosion-resistant alloys, you need to take care so that it does not contact with moisture. Otherwise, corrosion processes can cause the destruction of structural elements.

If we consider these features, live in frame house You can with great comfort, and it is not very difficult to build it with your own hands. But careful compliance with technology and purchase qualitative materials for construction.

Build technology

The production of a skeleton house is carried out in several stages.

The design stage involves drawing up the documentation for the plant, which will make profiles for the frame assembly. Even if the house is raised independently, at this stage it is necessary to resort to the help of a specialist. Incorrectly made framework details can make the construction of an impracticable task. Therefore, it is worth choosing and implement one of three options:

• Choose ready project at home. The cheapest option. In the manifold of options developed by designers, there is almost certainly a solution that combines an acceptable price and high quality.
• By choosing a finished project, order its modification for their own needs. This may include a change in the internal planning, adding new elements (erker, attic, etc.) or vice versa, refusal of complicating parts in order to reduce the cost of construction.
• Order the development of the project "from scratch". This is the most expensive and time-requested option. But it guarantees that the house will be unique in design and truly convenient for your family.

When the project is ready, the elements of the frame and the insulation panel are manufactured, and at this time they work to create a reliable basis for the future at home. A small weight allows you to apply a pile foundation or technology based on the use of SVS supports. Both methods allow you to make the foundation fairly quickly.

The carcass assembling further produce. In fact, this procedure resembles a game with a children's designer, only the details of a very large size. Since all the elements are made in advance, it is not necessary to spend time on performing measurements and drilling holes. You can collect the frame in a few days.

At the next stage, the frame is trimmed by the panels of the insulation. In general, this stage is similar to the work carried out in the construction of houses on a wooden frame.

When this stage is over, communications come to the house and decoration of the room and the facade are carried out.

Necessary materials and tools

All types of metal profile (it is still denoted by the abbreviation of the LSTK) for carcasses of houses made from structural steel using cold stamps. A protective coating of zinc is applied to each sheet, which prevents corrosion. The coating thickness varies from 18 to 40 microns. The thicker coating, the more expensive the profile, but also above its durability. The most expensive profiles are covered by hot galvanizing.

The thickness of the sheet from which the profile is made is also different. The thinnest - 0.7 mm, the thinst - 2 mm. The thicker steel, the higher the carrier ability of the LSTK. However, the weight and cost increases with increasing thickness. Therefore, the metal thickness and the type of profile are calculated by specialists based on the loads that the framework will carry.

Today, the LSTK goes to the market of dozens of sources: foreign and domestic, minor bodies and large steel enterprises. Recommend a particular manufacturer here is difficult. It is worth looking at the quality of the metal (no traces of rust, chipping chips, etc.)

There are several types of profiles:

They are also divided into subspecies depending on specific tasks:

It is impossible to determine which profile to put on each site without special knowledge. That is why the design of the frame home is better to charge a specialist.

A set of tools may differ slightly, depending on which manufacturer is ordered by LSTK. But almost always a profile kit enters the score: everything is numbered, decomposed in the appropriate order, equipped with the corresponding fasteners.

Frame house made of metal products with their own hands. Step-by-step instruction

The process of building a frame building is almost the same, at least a metal frame is used, even a wooden. Here are the main steps on the construction of the house on the finished foundation:

1. Based on the bottom line. This is a very responsible stage, as it is here that the basis for the future building is laid.
2. The main reference racks are put in the corners. They are very important to set strictly vertically. When using a metal frame of such an acceleration, it is easier to achieve, but still it will not prevent the installation of the installation with a plumb.
3. Extra racks are fastened between the main support racks, they are binding to a single frame frame with the help of crossbar and streamin.
4. Racks are associated with the upper strapping. Mounted frame of ceiling floors.
5. The roof frame is going.
6. The roof is waterproof and is insulated, the liner is assembled under the roofing material.

If you plan to build a multi-storey construction, two framework options can be applied. In the first case, the support racks pass through the entire frame. Then two floors of the house represent a single whole. In this case, the strength of the design is higher, but it is more difficult to build, as it will take a longer and heavy profile. In the second case, the framework of the first and second floor is separate things that are then connected to each other.

On this house frame ready. In principle, assemble such a design is not more difficult to assemble the designer. It is only important not to confuse the details and carefully perform each operation.

Here are some tips from builders who professionally engaged in the assembly of frame houses:

• The work will need an assistant, and is better somewhat. One can collect only some small design, like garden ArborYes, and then the hands will not be enough.
• Since the metal holds a temperature much better than a tree, a metal frame can create a so-called. "Cold Bridges." So that the house on the frame of the LSTK does not lose heat, you should take care of the qualitative insulation of external and inland walls the buildings. For this, modern insulating materials are well suited: foam, mineral wool.

Build a building on a frame from a metal profile with your own hands is quite possible. Modern technologies allow you to make such a construction rapid and not too time-consuming. But it is necessary that the framework is properly designed and made of high-quality metal. Then your home will be warm, durable and cozy.