Bench - an integral attribute cottage plot Or the local area. Often there will be no place for one, but for several benches. One in the yard, the other in the garden, the third at the gate. Bench with your own hands - probably the easiest and most useful project that can be done in the country.

Beautiful wooden bench texture will look harmoniously in any garden, especially if used for a bench is not just boards, and all parts of the tree that are available to you in the garden.

In order to make simple bench, Special skills are not needed or expensive tools and wood at the cottage - one of the most affordable materials.

If you have never done a bench, we will show the entire basic process, on the basis of which you can create your little masterpieces.

We hope that these beautiful benches Inspire you to your own sample.

Bench with your own hands

To begin with, we offer to master the simple design, which is easy to make and which has good stiffness and stability.

Bench of wood. Preparation of materials

In order to make a bench, you will need:

• 2 short front supports [a];
• 2 Long rear supports (they will be attached to the back) [a];
• 8 short crossbars for the strapping of supports and giving hardness [b];
• long board for seats and backs (their number depends on their width and the desired size of the bench) [C].

If you are planning to make a long bench with your own hands, then make sure your boards that you have prepared for the seat will not be fed under the weight of people sitting on it. And if the boards really begging, it can be corrected - you can assemble another support and put it in the middle.

Each item needs to be seized, so that after resting on the bench you did not have to pick up the spares from different interesting places.

Remember also that if you want to wear a bench, your supports should be at least 40cm longer.

Garden bench. Performance

After your details are cut in size and ground, you can start assembling. To do this, it is better to use a self-tapping screw, but if you do not have a screwdriver, the bench can be knocked down with nails.

It is important to screw the crossbars at least two screws to each support as shown in the picture. And the more distance between the self-drawing - the tougher there will be a design.

Now it remains only to paint and give paint to dry.

And that's what you can get. You can give a bench another species without changing the design. Just take more roughly treated wood, and it turns out a completely different thing! Although it is more constructively, its differences is minimal, and it is done in the same way.

Bench do it yourself

But even if it seemed to you too complicated, then for you there is a design of a bench with a back, which is made with a hacksaw and a hammer literally in a matter of hours.

All you need is six boards of the same thickness (preferably at least 40mm).

Its scheme is elementary simple.

After all the details are cut in size and polished, it is going in a few minutes!

Only holes under the self-tapping screw is better drilled in advance so that the board does not split when assembling.

It looks like a bench concisely and modern.
And it is not surprising, because there is nothing superfluous in this design. Each element of the design is absolutely necessary and at the same time - is minimally sufficient. Your backbone bench can be done in any way, we have shown only two easiest.

Photo benches

If you like working with a tree, you may want to expand your skills and add new original parts to your bench.

If you irrigate the stumps at the cottage - consider that you have become a happy owner of a unique material for the next one of your benches that you make your own hands.

Often, those of us who love and know how to do something with their own hands, just shy to spend their time on this "nonsense" - it is more important in time to accurate the garden.

The pleasure that you get when you work on your project bench for cottages, will deliver you really happy minutes.
And those surrounding, which are puffers, - why you are busy with a frivolous business, will be proud of your bench that you have done yourself, and everyone tells everyone that you are so unexpectedly talented.

And we are confident that these successes will inspire you to try new ventures, because the benches made by your own hands are always practical and more comfortable than ordinary standard.

Bench in the garden or at the cottage acts as not only for recreation, but also an element adorning the exterior. Therefore, to the manufacturing process sad benches Need to approach with special responsibility. On how to make a bench do it yourself learn next.

Benches do-it-yourself photos and varieties

Exists a large number of Materials from which you can build a bench in the garden. The first of them is plastic, this material allows you to purchase a ready-made bench. Make yourself product from plastic problematic. However, still get acquainted with the advantages of this material.

First of all, we note the ease of plastic products. Thanks to this quality, the bench can be easily transferred from one place to another. In addition, plastic products are distinguished by the available cost, they are light in care, do not need additional staining, etc. Among the disadvantages of the plastic benches, we note: a tendency to mechanical damage, instability in front of ultraviolet radiation, cheap and non-sustainable appearance.

Via plastic pipes And the tool for their soldering is managed to independently make a bench for the garden. Replace the soldering iron will help liquid nails, which reliably combine plastic pipes.

The most popular, affordable Material To create a garden bench - a tree. Wooden products are distinguished by practicality in operation, they easily fit into any exterior, especially garden, where there are so many trees. However, it is necessary to approach the choice of wood with a special responsibility, such a variety of wood should be selected that adversely transfer adverse weather conditions. In addition, drying wood should be optimal to work with it.

The following material for creating a bench in the garden is a stone. Stone products are distinguished by naturalness and stylistic, they are great for any exterior. Stone compositions are stylish, unusual and noble. However, the stone is suitable for the manufacture of legs of a bench, a long-term seating on the stone, can lead to health problems.

Therefore, a stone bench or is covered with additional covers and pillows, or is manufactured not only from stone, but from a combination of several materials. Please note that the stone bench is stationary and does not move from place to place, unlike plastic or wooden.

If there is in the garden or on the plot of metal compositions or forging, we recommend to stay on the steel bench. Such a bench will greatly decorate the garden and will become good place for relax. The appearance of the design is particularly attractive, especially when using additional steel elements. A variant of a metal combination with other materials, such as a tree, stone is possible.

Choosing a material to create a bench, should first come from its combination with other objects located on the site. The garden bench should be original, attractive and practical.

Decide with the type of bench, whether it is portable or stationary. In addition, folding options for benches, which are installed on the plot in the spring-autumn period and are removed for the winter.

The most popular are benches made of wood. Wood is characterized by ease of treatment, so benches of various shapes and sizes are made of it. In order for the wooden bench to serve you as long as possible, it is necessary to care for it and choose certain varieties of wood, which are distinguished by resistance to unfavorable conditions operation.

The initial stage of creating a bench do it yourself

Before the start of creating a bench in the garden, it is necessary to determine the place of its installation. From this will depend on the size of the bench, its form and appearance. We recommend installing a bench in a place surrounded by plants so that it always was in the shadow on a hot summer day. The view from the bench should be attractive and natural.

If there is a fountain in the garden, a waterfall or other water source, install the bench in such a way that it can be observed from it. Possible option to install a bench next to flowerumba or flower bed. Thus, you will have the opportunity to enjoy previously planted plants. A bench, surrounded by flowers or bushes, is distinguished by the comfort, on such a bench is convenient and pleasant to sit.

In any case, the bench must be located with a shady spot, so you will be protected not only from the heat, but also from a strong wind. It is possible to create an option over the bench that protects it from atmospheric precipitation, in this case, it will be possible to get a whole arbor for recreation. In any case, the bench must be located in such a place to ensure its owners full rest.

Wood bench do it yourself drawings

Before creating drawings for a garden bench, you need to decide on the requirements that are presented to it. Bench in the garden must be comfortable. The presence of a back allows you to feel more comfortable, especially if you are going to spend a lot of time sitting in the garden.

The second requirement is security, all connections between the individual parts of the bench should be durable. The bench must withstand heavy loads from several people. Therefore, special attention should be paid to the fittings and fasteners, they must be made of high-quality steel. If the bench is made of metal, then welded seams should also be high-quality and well protected.

Since the furniture will be in the garden, the material from which it is manufactured must resist moisture, solar radiation and temperature modes.

We offer to familiarize yourself with the way of building a simple wooden bench with backrest. The length of the seat with the back will be about 145-150 cm. This bench places three people. The backing angle is about 22 degrees. Width of the seat for seating - about 40 cm.

In the process of working on the garden seat, it will be necessary:

• wooden blanks, the sizes of which are predetermined in advance drawings;
• blanks for the manufacture of legs and holders;
• rumus, reinforcing the design of the bench;
• self-tapping screws and various fasteners;
• electric jigsaw, with which the cutting of wood is performed;
• grinding machine, for material processing;
• screwdriver;
• tassels;
• antiseptic primer, paints and varnishes.

If possible, buy ready-made boards immediately in the size of the blanks. Otherwise, use electric jigsaw to cut them.

After cutting wood, it is thoroughly processing. Previously made details are grinding. To process end sites, use the electrical plane. With it, it will also be possible to round the corners.

Next, the processing of long legs retaining the frame part of the back is performed. To do this, the markup is pre-on them, and then they are processed with inclusion of inclination. Initially, it should be noted the height of the seat, which is 40 cm. This part of the board does not require additional processing. Next, the next part contains a cut part at an angle of 18 degrees. Note that the sections on each of the legs should be the same. Otherwise, the shop will succeed asymmetric.

Initially in the design of the shops you need to collect the support legs. The interval between them is 28 cm. Make sure that this interval is respected between two pairs of the legs. To connect the legs with each other, use the timber. We recommend using the double strapping option, thus it will be possible to significantly improve the strength of the bench.

After assembling two sidewall benches, they are connected using boards. For fixing boards on the support legs, use the screws. Note that the interval between the boards is 20 mm, it should be equal to all parts of the bench. These gaps significantly increase the service life of the bench, as the air circulates through them and moisture is removed.

Further actions are aimed at strengthening the structural features of the shop. In order to increase the level of stability of the bench, you need to perform additional strengthening. For this, a lower strapping is performed using a bar.

Next on the bench made of wood with your own hands the back is installed. For its manufacture, two boards will need. The first is fixed with a 20 cm interval between it and the seat, and the second with an interval of 18 cm from the first.

On this, the manufacture of the bench with the back is completed with their own hands. Further, wood should be treated with various compositions that will protect it from moisture and insects. In order to improve the attractiveness of the appearance of the bench, it is covered with varnish or paint. Special impregnations protect wood from the influence of fungus or mold. To achieve an ideal surface glitter, wood is amenable to polishing.

Bench for giving with your own metal

In the process of working on a garden bench with their own hands, it will be necessary:

• profile pipe, the diameter of which depends on the size and strength of the bench;
• boards that will serve as a seat;
• welding machine for connecting pipes with each other;
• bulgarian;
• grinding machine;
• anti-corrosion composition;
• paints for working with wooden surfaces;
• fasteners;
• hammer and bolts.

For additional beck decoration, use forged elements that are installed on it by using a welding machine.

Before starting work, prepare the drawings for the bench. Decide on the cross section of the pipes used in operation. The optimal option will be the use of a pipe with a size of 3x3 cm. In the process of working on the middle bench without a back, it will take about eleven meters of pipe. For cutting parts, use the grinder or hacksaw for metal.

During the work, do not forget about safety rules. To create long seats, use two billets of 230 cm in size. As long parts of the rectangular design, 60 cm blanks will be used, they will need six pieces. In addition, it is necessary to prepare six details of 45 cm.

Wooden boards will be the basis for the manufacture of eight bars. The connection of bars with a metal frame is made by bolts and nuts. Please note that the fasteners must have a round and flattened hat, which will not be clinging the clothes of people who are sitting on a bench.

To build a simple steel bench with your own hands, follow the recommendations below:

1. Long parts of the blanks are located in a horizontal position, and short - vertical.

2. In the process of welding parts with each other, make sure that the angles under which they are connected to each other were straight.

3. An option is possible to adjust the bench in length. If the length of the bench is increasing, then the number of reference components increases.

4. After performing pipe welding, it is necessary to clean all the connections, as well as equip the holes for fixing fasteners.

5. The frame side of the bench should be coated with an anti-corrosion solution.

6. Before fixing wooden parts, it is necessary to cover them with paint material or veil.

7. At the final stage of build a shop, the boards on the surface are fixed.

Wooden boards on a bench can be replaced with steel details in the form of profile pipes. In order to improve the aesthetic appeal of the benches, the steel ends of the rivers are equipped with a metal frame hiding cuts. Duralumin pipes are not welded. Bolts use bolts for their compound.

For the manufacture of a bench with a back, you will need to use a greater amount of material. In this case, the convenience and comfort of operation of such a shop will be higher.

In any case, manufacturing the garden shop do-it-yourself, should be guided primarily by the number of people who will relax on it, the materials that are available. Only in this case, it will be possible to get a high-quality and optimal place to relax and free pastime.

Garden design is a modern rapidly developing sphere that enjoys a fairly high level of popularity. One of the indispensable attributes of recreation in the garden is, of course bench. It contributes not only to the decoration of your garden, but also a convenient pastime in it. After all, the garden is a kind of house, too, and I want to be in it it was pleasant. To do this, it is necessary to think about it in detail, where exactly placing garden benches. Most often, the benches are located where - neither be in a beautiful place.

For example, under the thick spreader branches of the tree. Or perhaps with some places in your garden there is an amazing view of the sea, river, lake, mountains or beautiful natural views. Choosing this approach, follow your preferences and how exactly you want to spend time in your garden. It is also possible to install benches near the alive hedges or surrounded by some bushes. This will create the effect of coziness and security. The last aspect is important for many.

If you decide to install shops in summer, choose a cool shady space where you can hide from the heat, and in the fall, on the contrary, you can choose open placeTo enjoy the warm rays of the autumn sun. The placement of benches in the garden or in the country area is a matter of exceptionally your preferences, because their purpose is to give us convenience and comfort in the first place to you.

Selection of material

Waves for summer cottages are, of course, a composite element. They should fit into the design of the garden or the country area, emphasize the originality of the design. They must contain beauty, originality and practicality.

In view of all this, attention should be paid not only to the appearance, but also on the material from which they are made on the level of its quality.

Varieties of beamerels

To date, several groups of benches are popular:

• stationary - made of wood, metal and natural stone;

• foldable plastic.

Of course, natural materials are very popular. Of these, you can create a truly work of art. Very spectacularly, carved, forged shops, as well as benches from combined materials.

Wooden benches are very practical and easy to fit into your garden design, as they are made of natural material. The advantage of a tree is that such benches are not only beautiful and have many design decisions, but also proper care And the processing will serve you enough long time.

But, like all the natural things, the tree is amenable to external and mechanical exposure, corrosion and weather conditions. So tree benches require special care. Metal benches are considered the most durable and practical. They also have many designer solutions. Such a bench will serve you more than a dozen years. They are perfect for the Garden in the style of "Modern".

How to make a bench do it yourself

Also, many wondered how to make a bench do it yourself. It's not just the opportunity to save and implement all your preferences and design solutions. Create a plan can be independently or use the services of specialized agencies. Here are some such projects.

This shop is simple and convenient. It is easy to create it easily just follow the parameters specified in the drawing and everything will turn out. For work, thick bars will need for support, bars or seatboards for seating and backing.

Here, of course, you will have to make more effort and time, but the bench will look solid and thoroughly. Decor can be diverse. Show fantasy and make garden shop unique!

Garden shops are primarily the possibility of convenient to relax, enjoying the nature surrounding the types of friends or loved ones. Create comfort with their help is easy and simple. Thanks to a variety of techniques, materials and elements, you have the opportunity to make your garden with cozy, beautiful and functional.

Photos of various benches for the garden

Shop - the subject that should be on each panstone. However, the purchase of a metal bench does not always have the opportunity to allocate funds. Therefore, you can make a shop with your own hands from the profile pipe.

Advantages and disadvantages of the profile pipe

The profile pipe may have a different section shape:

• oval;
• diamond;
• square
• rectangular.

It is made of carbon and low-alloy steel, therefore it is very often used both in civil and industrial construction. Such a pipe is easily cutting, welding and bending. From her you can make a beautiful garden gazebo, swing and rollback gates, children's swings, carousel, different kinds Fences and other small architectural forms for the indent. Including a bench.

Proftrub has:

• increased level of resistance to large physical and mechanical loads;
• fairly acceptable price;
• small weight of a ready-made shop design.

At the same time with it it is very easy to work.

The pipes with a round (oval) section have a high degree of resistance to mechanical loads, so it is best for the manufacture of a metal courtyard. It is recommended to choose thin-walled pipes with a thickness of 1 to 4 mm, since they are easier to work with them at home. It is worth the material inexpensive, and the metal structure will be easy to light.

A significant disadvantage of such a pipe is its corrosion exposure, so the shops will need to be regularly painted with oil, alkyd, epoxy or polyurethane paint with pre-priming and removal of old coating and the rust appeared. But if you correctly care for such a product, it will last you for a long time.

Photo Gallery: Profiterba benches in the country

Garden bench made of metal profile will fit into the household landscape You can always independently adjust the width of the back and seat Waves for cottages from metal products can be decorated decorative elements Shop can be made without back

Tools and Materials for Work

Metal pipes are not the only material that will need to be used for the manufacture of the bench do it yourself. You will need:

• pine boards for the base of the base of seats and backs;
• powerful welding machine;
• pack of electrodes - 3 mm;
• a corner machine (or knife for metal);
• powerful drill (for drilling wood and metal);
• fire or sandpaper;
• accurate level;
• roulette or normal meter;
• planning for grinding;
• paint and primer for metal;
• protective glasses (mask for welding work) and gloves;
• paint on a tree (you can take a varnish or a moron);
• reliable hammer;
• large pliers;
• tree bolts with nuts.

To flexing the pipes, you will need a special tool "Snail", which can be used as an ordinary brake disc from the machine. It will not damage the material.

How to make a metal frame for a garden bench do it yourself

Before entering the manufacture of a bench of any type, you need to spend preparatory workIn particular, it is recommended to study in advance to study the fracture technology and pipe welding.

Flexible metal pipe

In order to create bent items, you need to shut one end of the tube tube, and pour small sand into it, and then close on the other side. Then place it in the device for flexion by closing between the protrusion on the brake disk and the pin, and then bend under the desired angle.

If the pipe is not good enough, you can use the soldering lamp, and heat the bend place.

For the manufacture of various elements for a shop, it is best to take pipes with a round or oval cross section, as they are best to bend.

Sequence of the manufacture of a coating bench without a back

The bench without a back is a very simple design, so for its manufacture it will be necessary to make three rectangles that are connected to each other pipes protruding as a seat.

For the manufacture of a shop it will be necessary to take:

• metallic square or rectangular tube 11 meters long (cross section of rolled 30x30 mm);
• 2 pieces of a pipe profile 2.3 meters;
• 6 segments of 60 cm;
• 6 segments of 45 cm;
• 8 wooden boards 6 cm wide;
• 24 bolts with nuts.

For the manufacture of a conventional bench without a back, it is necessary to weld 3 prepared in advance of the rectangle, and then together connect them with two guide pipes that will serve as a frame for seating. Next, the work should take place according to plan:

1. Long supporting segments need to be located horizontally, and more shortly secure vertically.
2. In the process of welding sliced \u200b\u200bpieces of pipes, you need to withstand the corners of the supports, as they should be exactly 90 degrees.
3. After all the work on the welding, it is necessary to well clean all the seams with a special grinding or a conventional file.
4. Then the seams must be well primed.
5. After the framework is welded, each of the supports you need to drill 8 holes (arranged symmetrically) for fastening the boards.
6. To prevent the appearance of rust, the framework of the bench must be covered with paint for metal.
7. Wooden boards are recommended to impregnate with a mourn.
8. If desired, wooden boards can be replaced with rectangular tubes. They must be simply welded to the design and also paint anticorrosive paint.
9. In order for sharp corners to do not interfere, the rails can be laid in a specially prepared frame from metal. It will take 1.2 m tubes.

How to cook frame beef beefs with a back of a small size

You will need:

• profile tube with a cross section of 25x25 mm (8 m);
• pine boards (thickness 30 and 25 mm) for the seat and backrest device.

For the skeleton device you need to prepare in advance:

1. The pipe profiled is 1.55 m. To create a jumper between two supports.
2. 2 curved pieces of pipe 78 cm. Supports for the back of the bench.
3. 2 pieces of pipe 35 cm. For the manufacture of the base for seating.
4. 2 pieces of pipe 39 cm. For the front supports.
5. 2 pieces of pipe 20 cm. To strengthen the front support.
6. 4 steel plates 40x40 mm. For the manufacture of supports on support.
7. 2 Bottled steel strips of 45 cm. To connect future supports.

For the manufacture of seats will be needed:

• 3 Pine boards: Length is 1.6 m, width - 6 cm, thickness - 3 cm (for the base of the seating);
• 3 boards: length - 1.6 m, width 6 cm, thickness - 2.5 cm (for the back);
• 24 bolts with nuts.

Working on the manufacture of a bench consists of several stages:

1. First you need to weld the transverse crossbar and two pieces of pipes with a length of 35 cm. The jumper should be exactly the center of each of the pieces and at an angle of 90 degrees.
2. To this design, you need to fight two curved pieces of pipes for 78 cm long. It is necessary to weld at the place of bend.
3. Then the front elements of the support structures should be used to the workpiece. At the same time, the location of their compound should be 9 cm from the base of the shop.
4. In order to increase the strength of the shop, the front supports must be connected with the welding with a pipe that will perform the function of the transverse jumper.
5. Next, you need to welcome 2 arcs between the supports and fasten at the ends of the legs. The finished product must be well polished in places of welding seams.
6. Then the metal structure must be projected and paint with special anti-corrosion paint.
7. On the finished design, it is necessary to symmetrically arrange wooden boards, which will serve as the basis for seating.
8. Before installing boards, they need to be treated with varnish or verses. The design of the boards shops are attached with the help of special bolts with round flat hats. For the bottom, thicker and durable boards are used, and for the back - a little thinner. If necessary, you can paint anyone oil paint. If there are no wooden boards, then for seats you can use the same metal pipes With a rectangular cross section.

For convenience, you can make metal armrests on the bench. To do this, take two pieces of pipes for 75 cm and just bend them at an angle of 90 degrees, and then welcome on the sides to the metal frame. Seams process grinding machine or a file. Armrests can also be painted.

If you make rounded soles near the legs, then on such a bench can also be swing.

Finishing shops after its assembly

After the whole design is assembled, you can simply paint it with special paint for iron. With varnish or verse, it is recommended to process wooden sites and backrest, and then the shop will acquire a beautiful natural color. Such a shop will look great on any household plot. The decor is chosen taking into account the landscape design.

You can independently sew soft comfortable pillows and bedspreads for the back. Children and older people will be very comfortable to sit on them in warm summer days.

Video: how to make a bench made of metal pipes without a scheme

What kind of street shop you would choose, profile metal pipes will be able to significantly reduce the finished product, and at the same time its appearance and strength will remain at the highest level. Such benches will look great at the household plot. country house or cottage.

Garden bench is one of important elements The comfort and comfort of the manor. It can be used to relax with friends or dedication to a small amount of time to read alone. The main thing is that it was comfortable and harmoniously looked at the background general design Plot. To do this, you can think over and make a hand bench for a garden.

Before moving to the very arrangement of a cozy place on the site, it is necessary to correctly choose its dislocation, think over the nuances and pick up the design.

Rules for placement benches

1. At the very beginning, even before creating a drawing bench, you need to choose a place in the garden for its location. Not only the subsequent comfort depends on this factor, but also the selection of the required material.
2. On the plot where there are many trees growing, it is conceptually better to put wooden bench With the framing. For the small area, a small shop in openwork decoration will be suitable.
3. When placing a bench in a quiet place surrounded by clubs with flowers, or not far from the reservoir, a great place for a secluded rest will be created.
4. Also benches are often installed on the verandas, in arbors or on the platforms for a picnic. In this case, for convenience, several identical benches in a row or around the plot are usually placed. A variant of the combination of a table and several shops is possible. It is best suited for family tea drinking and pastime board games with friends.
5. Most optimal option The installation of benches will be their placement in the place from which the flower beds can be seen, panorama or water. It is not necessary to install a bench in such a place so that the selection of the neighbors or a deaf wall of the house is visible from it.
6. It is a relevant placement of the bench is considered to be its installation on the playground for children's games, not far from the entrance to the house or near the summer pool.
7. Another good place is not far from the bed or among the plantings in the garden. It is advisable to find a place under the branched trees in the shade. If there is no one, then you can arrange a shop and under the canopy.
8. Beautifully look at the bench, performed by itself, in the frame of flowering bushes or flower, on a stone platform, on a small elevation.
9. The design of the manufactured product is best combined with the place in which it will stand.

Variety of materials

1. To construct benches, you can use different materials:

• wood;
• metal;
• plastic;
• a rock.

1. The most simple models in the manufacture can be called options from the wood array. From this militant and, that is important, natural material, you can make many different benches in shape and style design.
2. Stone benches also look quite aesthetic, but are less functional than wooden. In winter, you don't want to sit at such a shop at all, but look at her beautiful decoration There is always a desire.
3. Forged options are quite complex in the production part, but look very impressive. For the design of such shops, only the master of a blacksmithing business can take place - a specialist in this area.
4. Plastic options are quite simple, costs will be minimal, but such products will not serve for a long time.
5. there is various options Combination shops and benches. Enchanted them are made of wood and stone. Often they are decorated with textile pillows, warm plaids and cape.
6. You can also construct a bench from unusual materials. Among them are the most interesting options You can call:

• solid log;
• wheel rims in combination with uncircumboards.

Options for designing garden benches

The manufactured product can have both a completely classic and unusual form. The bench can repeat the silhouette of the animal, the ship, cars, as well as other items and images, or just be decorated with individual elements Decor. To the bench does not look boring, it can be painted in different colors. Creating a pattern and pattern here is sufficiently appropriate, especially if the country is often visited by children.

Design design requirements

Note that made own hands Benches must match the following parameters.

Convenience

Since the benches are designed for a comfortable stay, therefore it is important to consider such a construction that will allow you to comfortably sit down all family members, relax and relax. Of course, it is best to choose options with backs.

Safety

In order to avoid injury, the bench needs to be made strong and durable. It must carry quite large loads. Collect design need carefully, use it only qualitative materials and fastening elements.

Moisture resistance and portability of temperature fluctuations

For our region, it is important that climatic conditions did not affect the bench that round year will be on the street. Then she will last long.

Garden benches do it yourself: drawings and photos

Before starting the construction of the bench itself, it is necessary to make or choose a correct drawing. Before you need to decide on external species and materials for its manufacture. In this you will be helped by numerous photo materials of garden magazines and resources for landscape design.

Today on the Internet you can find a huge number of options for the design of benches. All of them have their own nuances, but are designed to perform one function. After a thorough selection, you can think about the independent design of the bench or use the option you like. It is not necessary to make it exactly the same as in the photo, you can combine several original options and add something to your own.

Garden bench do it yourself: drawings

1. After the selection of the structure of the bench, you can start working on the drawing. For this we need:

• paper sheet;
• pencil;
• line.

1. At this stage, it is necessary to resolve the selection of the optimal height, the number of legs, the depth of the seat and other important nuances. Therefore, there are several general rules creating a bench scheme. During the drawing up drawing, it is important to use:

• the height of the seating should not exceed 40 - 50 cm;
• the width of the seat on average should be about 50 - 55 cm.

1. These values \u200b\u200bare standard, but they can be applied during the construction of any kind of bench. The main thing is to preserve the proportions, otherwise the finished product will not be very convenient to relax.

1. If the bench is assumed to have a back, then for its manufacture, you can use the standard height value, which is at least 35 cm, but not more than 50 cm.
2. It is important to determine the appearance of the back to the bench. It will be based on the possibility of transferring the design from place to place. An innocent bench involves fastening the legs firmly into the ground, in this case anyone can be chosen.
3. Making it with your own hands a garden bench made of wood, according to the drawing it is possible to calculate the amount of material that will be required in the manufacture of a particular design. If the wood is used, then several important marks are made in the drawing. One of them is a beep of the inner surface of the legs, which prevents water accumulation from the bottom of the structure and its subsequent destruction. Also, the diagram indicates the dimensions of each of the parts separately, besides this, the values \u200b\u200bof the angles of the addition of all elements are indicated accurately, taking into account all the nuances of the bench design.
4. Natural array is not better suitable for the manufacture of benches, because it is easy to handle it, it looks noble and absorbs heat.
5. When selecting the material, it is important that there are no flaws on the tree. The array should be well succeeded before starting work on the product.

Garden benches made of wood with their own hands

Necessary materials:

• screwdriver;
• wooden boards - 3 pcs. on the seat, 2 pcs on the back, parameters: 150x15 cm, thickness - from 3.5 to 4 cm;
• boards for legs protruding backrest holders: dimensions 90 x 15 x 4 cm;
• sandpaper;
• front-arrangement legs: Parameters: 36 x 15 x 4 cm;
• lobzik - cutting board;
• primer;
• bruses - Strengthening the strength of the structure, dimensions: 4 x 4 cm;
• electrolake - grinding of wood details;
• self-tapping screw;
• varnish for coating a tree.

Step-by-step instruction

Consider the sequence of manufacturing a wooden bench.

1. For the manufacture of a bench, you can purchase the boards of the desired size already in the finished form. If there is no such, then the jigsion will need to carve out the necessary blanks.
2. After cutting the tree to the required length, its processing is carried out. Seating and backrest blanks are polished. Each of the ends is processed by the electrolabank. With it, they also need to round a bit.
3. The rear legs are attached strictly under the correctly selected angle, as they perform the role of the frame to which the back is attached. To do this, the markup is applied on 2 billets from the wood with a length of 90 cm.
4. First, on the longest board marks the value of the length of the product. This material is not yet necessary to be processed. From the beginning of the mark on the full length of this board, a small cut is made. Its value should be not more than 20 ° C, since it is in the future will form an angle under which the back of the bench will be tilted.
5. On 2-legs, cuts are made of the same size not only by the magnitude of the angle of inclination, but also by the meaning of the height. This will avoid the creation of a skewed bench.
6. Collection of design begins with legs. It is important to observe the selected gap between the legs, located in front and rear. Between themselves, they are connected using a bar. It passes through the entire width of the bench. It is best to make a double strapping that will take place from below, as well as on top.
7. After collecting lateral parts, proceed to the collection of the main parts of the seating and the back, which are connected in advance with the boards. Fastening takes place to timber from above using self-tapping screws. Between the blanks, you need to leave the gaps of 1 to 2 cm. They are needed to ensure air passage and will continue to prevent the moisture accumulation in the details of the bench.
8. It is necessary to take into account that the bench needs to be stable so that it can serve for a long time. To do this, it must be strengthened by strapping with bars from below. To do this, you need to fasten 2 blanks to the legs. Of course, it is not necessary to use 2 boards, it will be quite enough and one transverse attached to the strapping from the bars, but it will be more reliable.
9. Next, the backing is set using 2 boards. One of them is attached at a distance of 20 cm from the seating, and the second is 38 cm.
10. The last stage is the coating of the finished product. It is necessary to protect the bench from influences ambient. The best lacquer is suitable, as well as impregnation. It will cope with the protection of the product from the occurrence of sites with mold and the effects of insects. After treatment with varnish, the furniture will become even more beautiful, it will look more elegant. To give it gloss, polished is made, and the lacquer coating layer is applied at least 2 times.

Garden bench with backup do-it-yourself: instructions

This design is made quite simply and does not take much time.

1. You will need:

• support bars - 6 pcs. (3 small and 3 more);
• boards for seating and backrest.

1. The assembly is carried out after creating a drawing, on which all sizes and values \u200b\u200bof the corners are precisely indicated.

3. Follow the parts in the design of the structure are located. The slightest inconsistency will lead to the doss of the bench.

1. Usually designs with backs are manufactured by portable. Therefore, it is necessary to make it in such a way that it stood smoothly. At the same time, more attention should be paid to the design of the legs. The stability of the structure depends on them.

Garden bench Hands: Successful homemade

There are many different options Making benches with their own hands. Consider some of the easiest and most successful options:

Classic bench

This type of shop has a seat and a rectangular back. For its assembly, the same materials will be required as for the usual bench. During the connection, the parts can be slightly fantasized and replace the vertically spaced planks on those that will be located cross. You can decorate the top bar of the back of a beautiful carvings. When creating armrests, billets can be given a figure view. The same applies to the legs.

Table and benches

The design of shops and the table is appropriate on any country site. However, its assembly has several nuances. Each of the large parts is collected separately from each other. Their connection is made in the very end. For this use 4 lower bar. Each side is attached to 2 of them. The table consists of a tabletop and legs, which are located crosswise. Breaks to collect quite simple. We need boards, the length of which is calculated when creating a drawing. First, the part is bonded for seating, while it is important to give the design of stability, and then the table is already fixed in the middle.

Metal bench.

This shop make a little more complicated than the two previous options. In this embodiment, the scene frame is first made, and then the legs that are welded to the corners of the seating. Between the legs, which are located in front and rear, are welded ribs. Next is made the frame of the back, which is subsequently welded to the seat. The angle of inclination should be about 15 - 20 ° C. The last step is polished, stripping and coating with the primer of the manufactured product. Only after that metal carcass Boards are attached in the seating and back area. For fastening, bolts and nuts are used.

In the network you can find a lot of photos of successful homemade garden benches made by your own hands. All these options for holiday designs look very beautiful. It may seem to many that their manufacture will be difficult, but in fact any wizard will be able to make such benches if it makes a little effort and stuck with patience.