In general, I love, like many of you, probably, the Central Asian cuisine in the form of Plov and the like of Jorev. Even working a guardian in student times, I had a pilaf 'sovereign from Central Asia, I mean Uzbeks, which, as in that joke, "there is no one who doesn't think about the construction site" was in excess on the very construction site. They did it as it believes in a huge cup-shaped cast-iron cauldron on open fire from the minimum product set of the needed for the Plov, but at the same time their main cook (Rasul Hi!) Sculpt such a culinary masterpiece that I took everything to the last rice and praying to the fate so that The next my duty they prepared something like that.

The second time, indescribable delight to this dish, my cousin was caused, which lived in Uzbekistan, who had a great honor of life in Uzbekistan, hitting there in Sovkovsky times. She prepared this dish already on the plate at our house in a cast-iron crash. It was also insanely tasty. After that, I began to ask her about all nuances of cooking Plov. So I began to experiment with the preparation of the pylon (and then the bass) at home first in some teflon saucepan, then in the cauldron for a plate (flat bottom). Stop ... The topic is about the brazier)) Let's go then ..

In short, I came after some time to understand that all the same for the real Central Asian flavor, a fire is needed in food and, accordingly, a cup-shaped cauldron. Well, I looked at Kazan, but for him you need a stove or some kind of pribrud in the form of a mangala. I tightened with convolutions and remembered that when I saw a mangon for the cauldrons on the expanses of the immense internet as craftsmen. And I just got a set of bald rubber on stamped discs from long-sold nine. They and place are occupied, and the Jewish duke does not allow to throw away. In short, I looked at a few videos with such dangles, pecked with my wife's brother Denchik, who once worked as a welder had a welding machine, threw off the rubber from the disks and began to wait for a vacation to drive to Tula to his wife's relatives for a couple of days and part-time grinding brass .

Actually, the original data: 2 disks R13, 1 bolt and 1 stud with nuts for homemade loops, knob from something and a piece of metal profile, which provided den.

We plan a cut line on one of the disks and saws

2

result

3

By the way, the scoopedie glance first thought to throw out, but then when the MANGAL was already assembled that it can be used as a lid. To which it is convenient to put the kettle or the same saucepan.

Meanwhile, den on the second disk brews a central large hole:

4

5

We put 2 disks and contemplate how den boils them in a circle.

6

Checking the cooking seam OPC))

8

Then I still walked on the seam several times with a grinder, cracked slag and strongly protruding irregularities.

We proceed to the process of making legs. Here I upgraded the mangal from his prototype, which took the basis. The fact is that in the prototype legs were welded to Mangalu. I wanted to get a mobile version, which, if desired, it was possible to transport in the car, for example, when leaving at nature. Such a solution was the welding of small segments of the profile larger on the cross section of the profile from which it was assumed to make the legs themselves. So, we try on and cutting 3 cuts of a large profile:

9

We place on the eye the recycled part of the mangala bottom and weld these segments:

10

We cut the legs themselves

They did not want to insert, even after the sharpening of the grinder, a couple of blows of the ax with every leg and miracle, got up like relatives!

We plan the door of the furnace and cut from 3 sides:

Then there was a long one with the inventing loops. Initially, a part with a thread was pulled from the bolt and the hairpins, screwed nuts and welded on top and bottom of the door - it does not open, the angles on the nuts interfere. Then it was accepted by me to sharpen the nuts with a grinder from the corners to give a round form and again weld on top and bottom. As a result, there was one loop of the shuffling nut and a piece of bolt welded in the middle, exactly on the welding seam 2 disks. The door handle was made from another segment of the heap with a hemispherical head.

14

I wanted a handle, denu Lyutu from this idea, such as they will not only be interpreted, and the brazier can be transferred to the legs together, all the same with a melted fire, you will not take it one behind the handle. But I left and did not lose: already tasting him one of the car in the garage and the barn, it is much more convenient to take on the eye and carry with one hand, than shifting and dragging it with 2 hands and at the same time trying not to flasher.

Also made 4 triangular embossed at the top for the exit of smoke. Sfotkat forgot them, but they can be seen on other pictures.

On this actual work with the Mangalom on Tula Earth and ended. After that, the bonfire was divorced in the mangale, so that the paint burned. And in the evening, the brazier was a fighting baptism: it was cooked pilaf in a cast-iron bowler, although under him (pot) had 2 pieces of profile, because He fell into a brass himself very much.

The rest of the work I already spent on arrival in Ryazan. I cleaned the burnt paint with a metal brush and a wet rag.

But as we see in the photo, the lower part of the mangaal did not burn and had to burn it on the outside on the open fire.

After additional firing and stripping, the brazier began to look like this:

In the building of the building goods, a black matte paint can be purchased with a heat-resistant paint for painting a mangala. The surface is degreased and painted in 2 layers. Final result:

18

Well, now it remains to order from buying a real cast iron cauldron. At first I wanted to order him on the other, but it is falling when the entire skewed bakery period ends. Therefore, I decided to spend and buy it in the summer to have time to enjoy oriental cuisine fully. Maybe then a post comprehended here about it.

19

Made brazed, stove, barbecue. Skolna from car disks - an example of how to re-use spent materials for useful and the desired design. These of the wheeled disks are made simply enough, they can be made with their own hands in the garage or in the domestic workshop. Although the design is simplicity, such a product can be used for many tasks.

How to make a grill of wheeled disks

For self-assembly This design of the autodyskings are thinking in advance which will be the scheme of our product. We prepare the consumable material in the desired quantity, as well as a list of tools. To do the work qualitatively, you need to be able to use the grinder to cut the metal, and the welding machine.

Simple version - a manbon under the skewers

More complex mangal models with grill grille

How the furnace-brass works:
Down we put firewood or cooked coals. The grille is placed on top or stacked. Cookware objects can also be located on the grid or straight on the wheel if the size is suitable. Thanks to the heat that climbs up, you can prepare a meal in analogous to the usual mangalu. If we want to smoke the products, then close the output at the top, look so that the chips should be formed by smoke. In each case, an individual structure is thought out, depending on the needs of the owners. However, when assembling the fixture, the main principle of the structure is one, regardless of the model.

Small chamber of automotive drives

The brazier from the disks will be more profitable if you adapt it for various tasks. For those who prefer homemade bald and sausages, the smokehouse is recommended to serve as a device from disks. Such a useful thing is done using a minimum of two units of material.

The work is built according to the principle in which two discs are connected, with the formation of a solid hollow structure. The upper part is modified to be comfortably frying kebabs - as in the previous model. However, to keep smoke, the lid and smoke system should be equipped. The partition with holes can be left, which will be easier. In this case, the device can act as a cooking surface.

To secure the door, weld to it on the nut so that they are symmetrical about the welding seam. The barbell is also welding on one bolt in such a way that the doors nuts were put on them. After that, the brazier is ready! Now you can enjoy the cooking process and dishes themselves.

Ideas how to create your own hands from car drives brazing, barbecue, furnace

The ability to adjust the height of the cauldron at the disk stand.

With forging elements Grid Mangala

mangal from the disc on legs.

Mangal from a wheeled disk and spit.

Suspended original brazier.

Wheel disk for mangala barbecue taken from a truck.

Upon the occurrence of the summer season and the long-awaited summer holidays, the most familiar way of resting for a Russian person is to prepare in the fresh air of kebabs and barbecue. But it is impossible to do without a good mangala. It is not necessary to spend money and buy it: you can make an original brand from the car's disks with your own hands.

Features of the self-made option

If there is a desire to purchase a finished brand, then you need to prepare for spending quite big money. However, all these costs with ease can be avoided if you independently build this tool for recreation. To make a brand with your own hands, you can use ordinary automotive discs, as well as standard tools.

Chief advantage independent manufacture It is that a person can create a convenient design. The fact is that standard stores are about the same height. And since each person's growth is different, not everyone will be convenient to be constantly bending to scroll down the sauper with meat strung on it.

Few people know how to make a brand from the drive from the car. But there is nothing complicated in this, it is only worth following instructions.

Materials for assembly

Any motorist in the garage there will be old metal discs that have not been used for a long time, and they just take free place in the room. It is enough to find two disks to make a good brand.

As instruments and consumables, you will need the following:

It is worth noting that the owners of a private house or the country area will not face the acquisition of these items, since it usually has all this in the household. Consumables are easily purchased in specialized construction stores.

Mangala manufacture of wheel drives

Of course, you can use only one car disc. A barbell from one wheel disk with his own hands is made much faster than two components. This furnace will only be supplied with legs, as well as cut the upper part. But the unit will not be extended as effective and full of two drives.

The process of assembling a manga from car drives:

We make the door of the furnace

The manufacture of the door is the most painstaking step of the entire assembly process, which requires great accuracy. To begin, it is necessary to make an accurate markup so that the bottom edge of the door is 4 or 5 cm above the stove.

Most suitable option For the door - 20 by 13 cm. The figure 20 denotes the width, and 13 - height. The manufacturing process is as follows:

Do not forget to make a handle on the door. To do this, we use another bolt and weld it in the right place. To avoid burns when burning kebabs, this element must be wrapped with a special non-combustible insulation.

Proper manufacture of supports

It is also necessary to approach the legs of the legs. Otherwise, the assembled unit may not withstand the load on it and break.

The execution order is as follows:

1. Take a profile tube that prepared in advance. We cut it with the help of a grinder into three or four parts. Thus, good supports are obtained, which will need to be subsequently attached to the Mangalu.
2. It is advisable to make four legs, because such a design will have greater stability. We note an equal distance and at the same angle weld the supports to the bottom of the mantal. It should be taking care that the welding is high-quality and the whole design does not overturned.

If there is no desire to make a brazier on the legs, then you should attach a good chain to the resulting chain. But in this case, you will have to seek a more reliable place to install. It will take a support that will endure the weight of the mangala.

Pens for convenience

To conveniently transport and transfer the brazier, it is best to make a handle. For this use metal wire. She will need to give a P-shaped form. With the help of a grinder, a small cut in places of bend or welding is heated by a wire. After that, the material bends. In the first case, the sawn material will need to strengthen with welding. It is enough to apply a few drops to the place of bend. The obtained parts need to be welded to the housing in opposite sides of each other.

After the end of the work, it will take high quality products. Thus will be removed from the mantal surface of the oil and gasoline, which fell on discs during the operation of the vehicle.

After the calcination will be completed, it is necessary to use the paint from the canister and coat the brass. So it is created aesthetic appearance fixtures. The paint must be acquired exclusively heat-resistant, since the usual simply will not withstand high temperatures. The shade is selected any. It's a matter of taste.

Safety at work

In the manufacture of mangal, quite dangerous electrical appliances will be applied. Therefore, it is necessary to handle all the tools to be extremely careful not to harm yourself and surrounding people.

Tool use rules:

Creative people who know how to use the welding machine, often decorate the brazier by welding. Electrodes can apply various drawings and patterns. It is not necessary to follow the instructions in accuracy and make the handles of the specified method. If there are skills of art forging, it is quite possible to build more beautiful handles that will have beautiful winding forms. With a decorative decoration, it is necessary to rely solely on your capabilities and fantasy.

Taking the manufacture of mangal from the disks, you just need to follow the instructions for the correct assembly. There is absolutely nothing complicated. Any person will cope, who at least once in his life worked with the specified tools.

Such a design, like a manbon from car discs, is a great option for reuse of waste materials. Such an adaptation is simple in execution, and therefore it can be made with your own hands. Despite the simplest design, the methods of using the product is enough, it can even replace the comprehensive barbecue model.

Example of mangal made of old car drives

Design features

Made independently a mangall from the wheel disk has a mass of positive characteristics. This design allows you to get a full-fledged grill complex with minimal cost on its manufacture. All materials are quite affordable for almost any dacket. In addition, they guarantee the durability of the product and its strength under any operating conditions. Another plus is the compactness of the mangaal. About him distinctive features And the versions are worth talking in more detail.

Video: Instructions for the manufacture of mangal of wheeled disks

Materials used

In order to make a brazier from the disks, it is not necessary to be high, as practically sweater materials are used for its manufacture. Already spent their car discs are usually thrown out or surrendered for a penny on scrap. At the same time, many ways of their alternative use are not taken into account, among which the manufacture of mangal is one of better options.

Unnecessary automotive discs get a chance to the second life

For the cottage or private house, the brazier is considered a mandatory attribute. Making from old disks allows you to save money, since the finished models in their capabilities in the ratio of costs are often inferior to this option.

Please note: almost every motorist will have at least one unnecessary old wheel. Otherwise, it is possible to find the appropriate material from familiar, neighbors on the garage or redeeming for a small amount per hundred or with the hands.

The advantage of using disks to create the grill is metal thickness. Even worn wheels will be suitable for this further operation. The metal does not fade and is not deformed, and their form is ideal for creating complex products for cooking on coals.

Principle of operation

According to the principle of operation, the brazier from the wheeled disks is similar to some other homemade models, for example, made from barrel or cylinder. It combines such opportunities:

• grill - allows you to prepare on skewers or a removable grid;
• barbecue - for roasted steaks, complemented by a lid that creates the effect of the oven;
• cooking surface - the shape and diameter of the disk allows you to install the boiler, a frying pan or a saucepan;
• smoking - Some models allow you to perform hot smoking products.

Simple design combines all necessary functions

The principle of action is extremely simple. Firewood or finished coals are loaded into the lower part. A grill is set to the top or stacked skewers. The dishes can also be placed on the grille or directly on the wheel if their diameter is compatible. The heat from below warms the air and allows you to cook, as on the usual brand. For smoking, you need to close the upper output and ensure the drainage of chips to form smoke.

Each design is thought out individually, fitting under the needs of the owners. Nevertheless, the main part of the work on the manufacture of the product remains common to all models.

Execution options

You need to consider possible options for execution of the product in more detail. If you want to make a mangal from car drives, you need to pay attention to such models:

The simplest option - a manbon under the skewers

• Double design. 2 wheels are used, thanks to which the brazier becomes higher. Due to this, it is possible to put a cauldron. Warming on all sides allows you to prepare in it delicious disheslike in the oven or stew them.
• Closed oven. Allows you to smoke foods, as the smoke is assembled inside the chamber and is derived from a small amount through special holes.
• Comprehensive models. It combines all 4 products of the product described earlier. Other can be mounted useful elements, for example, chimney.

Advanced models with grill grille and auxiliary elements

It is also worth noting that such a brand can be made with legs and without legs. The stand will be needed for single models, but in double and triple it features the bottom disk. At the same time, there are limitations regarding the use of the structure, because the wet land can prevent the formation of heat, and the hot metal is not allowed to contact with wooden floors on the terrace.

Readers consider these materials useful:

• How to build your own barbecue complex?
• Garden barbecue as a cooking element and a whole philosophy

In order to independently make a brazier from autodyskings, you need to think in advance the scheme of the future product. Decide with the number of consumables, prepare the tools. To perform quality work, it is necessary to own the skills of using a metal grinder, as well as welding machine.

Preparation of materials and necessary tools

In order to make a hand brass from the wheeled wheels, you will need such materials and tools:

• old autody;
• bulgarian;
• nozzle for cutting metal;
• disk for stripping rust in the form of an iron brush;
• file;
• drill;
• a hammer;
• bolts;
• profiled pipes or steel rod;
• grill grill grill.

Bulgarian and welding machine - Main tools when working with metal

All of these tools will be needed for processing and connecting the details of the mangala. From profiled pipes and rods are convenient to make legs. All of them will need 3-4 pieces.

Tip: It is better to make 4 supports for greater stability of the product. The tripod can fall on one side when placed on an uneven surface.

Old discs preferably clean from rust

You need to prepare the wheels in advance. If there are traces of rust and paint, the surface is cleaned with a metal brush using a grinder or drill. All is unnecessary cuts off.

Simple option

Several embodiments of such grill structures should be considered. You need to start with the simplest - a single brand from the wheel disk on the legs. In order to make it initially need to hold a number of manipulations with the disk itself:

1. On the one hand, the inner part is cut - the partition. The container is formed, similar to the pot.
2. If there are too many holes in the bottom or they are quite large, so that coals wake up through them, you need to screw the extra plate. It is not necessary to completely close the lumens, as the coals should be bludging to maintain heat.
3. On the sides to the bottom or closer to the top of the legs are welded. Usually they are made by 40-45 cm long. This height of the mangala is optimal, as it ensures the stability of the design and the convenience of its use.

Metal legs welded to the back of the disks

Next, if necessary, it is necessary to clean the sections so that there are no sharp edges. You can additionally install the grille. It is not necessary to weld it, it is more profitable to use removable parts. Also for the convenience of maintaining heat and clearance of the ashes, you can make a window for firewood from the side of the disk. For transfer, the design is equipped with handles, welding them symmetrically on the sides of the wheel.

The top is cut under the installation of barbecue grid

Tip: If you use two or three wheels, you can restrict ourselves to welding metal bars to the bottom. In some cases, you can do without a support.

Mangala version without legs

Smokehouse

It is more profitable to make such a brand from car discs that can be used in different directions. For lovers of homemade bald and sausages, smokehouse will become an indispensable device. In order to turn old wheels in such useful thing You need to use at least two units of material.

The principle of operation is that it is necessary to connect two disks into a solid hollow structure. The top can be adapted to the roasting kebabs on the principle of the previous model, but to save smoke you need to take care of the arrangement of the lid and the smoke lead system. You can leave a partition with holes, which will simplify the task, and use the product like cook surface.

In order to combine two discs, it is necessary to cut partitions. Next wheels are joined and welded with a solid suture with each other. The legs are welded to the bottom of the lower element. To ensure access inside, the door is equipped. To make it you need to walk with a grinder around the middle of the product and cut a rectangle.

Horizontal welding seam passes in the center of the door

To secure the door to it, it is welded on one nut, symmetrically with respect to the welding seam. To the Mangalu, also with the help of welding fasten 1 bolt in such a way that you can wear the doors nuts.

Folding attached with welding bolts

Tip: In order to fasten the sash without any problems, the bolts are screwed into already welded nuts. Then the door is applied to the impeller and fixed on the design itself.

Similar homemade mangals make it possible to equip all conditions for recreation with kebabs with minimal costs. In addition, no effort is not necessary, because all stages of work are extremely understandable and easy to implement.

kamin-maker.ru.

Mangal from car discs for kebabs and for cauldron. Mangal do it yourself from disks from A to Z

Very little left until the country's period, and the owners of land plots will spend a lot of time on them. Food cooked in the fresh air is much more tastier. Therefore, in this article, we will consider how you can make the design for kebabs from old car drives as you can make your own hands. Such a building has great advantages that can be operated for a long time as a mangala.

It should also be noted that such equipment will be safe and very convenient. Manufacturing should not cause complications, so every person can cope with the task. It is simply possible to cook not only kebabs, but also to establish the cauldron.

How to make a brazier from the car wheeled disks (Zhiguli or Zil)

For the manufacture of metal mangala, it is recommended to use old wheels from the "Zhiguli" car. At the same time, they should be made not from an aluminum alloy, but from whole steel. If you have no disc in the garage, you can contact any tire service. If they are not given free of charge, then you need to pay a symbolic amount.

For the manufacture of the design, it is necessary to prepare the following tools and materials:

• 1 m wire with a diameter of 8 mm.
• 3 bolts with nuts.
• 4 nuts with a diameter of 10 mm.
• The profile metal pipe with length is not less than 1 m.
• Two car disks of the same size.
• Welding machine.
• Bulgarian.

Cut partition on one of the disks. To do this, you can make notches using a grinding machine, after which itching it with a heavy hammer. If there is a gas cutter, it is more convenient to use it.

Then the discs need to be ached to the perimeter with a welding machine. Thus, the partition of the second disk will serve the bottom of the metal tank.

To use a manbon for cooking in Kazan, you need to make a small door. In this case, you do not need to remove the dish to throw the wooden fuel. This stage of manufacture is the most difficult.

To do this, it is necessary to note the rectangle, the lower part of which should be at the height of several centimeters from the bottom. In the middle of the door there will be seam left by the welding machine.

Cut the rectangle with a grinder, then treat all the edges to get rid of burrs. From the side of the bolt heads. On the cut part of the fight nuts. Thus, we made homemade loops. On the other hand, the cut fragment you need to make a hole and screw the bolt. He will act as a handle.

At the next stage, you need to brew a bottom of the future mangaal with a metal sheet so that the corners do not fall. Just need to leave small holes to strengthen the thrust. Some experts recommend installing a grid from thick wire at the bottom.

After that prepare 3 profile pipe, up to 80 cm high. However, it's all individually, as it all depends on the growth of a person who will be cooking. Metal pipes Spear to the bottom of the design at equal distances. As a result, the brazier will be reliably standing on the surface.

For safety and comfortable use of the design, you need to make handles. To do this, you need to visually divide the disk in half, and from the opposite sides, in several centimeters from the top, you need to fight two nuts. Then to turn the coil wire in them.

To improve the appearance of the made mangala, it needs to be calcined, after which it is covered with a dark heat-resistant paint. The design is light enough and mobile, so you can take it not only on country cottage area, but also on vacation in nature.

Drawing, photo and video of mangal from disks for self-making

Since old wheel drives have the same sizes, the development of a schema or drawing is not required. Everything is quite simple, as it was possible to understand from the above-described design manual instructions. It is only necessary to decide on the height of the legs to be comfortable to cook.

Below from the video, you can find out how to make a metal brand from one car disk. All work takes no more than one hour, subject to availability essential materials and welding machine.

If you manifest creative fantasy, you can make a beautiful and functional brass. The photo shows the results of the masters.

Summing up can be said that the design for cauldron or kebabs can be made in a short time. Only you need to have little experience with the welding machine.

lEADINLIFE.INFO.

Barbecue Barbecue Mangala Hand Barbecue Dives (25)

25 original ideas For the manga from the disks from the car made with their own hands.

Wheel discs were not ignored to our Kulibins, the wonderful masters quickly found the use of steel stamped automotive disks.

As it turned out, you can make an excellent barbecue from the disks, while homemade looks very original in what you can make sure that I viewed this selection of homemade barbecues of mangalls from disks.

Let's start from the jangle with the lifting mechanism for the lattice made from the automotive jack. The jack allows you to adjust the height of the grille over coals.

Worn lattice under Kazan.

Here the brazier is installed on the car shock absorber and spring.

Barbecue with chimney.

Oven from disks under Kazan.

Openwork brand from a disk with forging elements.

Barbecue with a folding grid.

Burning brazier with spit.

The support legs can be welded directly to the disk.

Suspended mangal barbecue from the disk.

Barbecue on the wheels.

Another version of the mangala made from the disc from the cargo car.

In fact, for the manufacture of such a manga, you will need 1 - 2 car discs of several metal rods or pipes, a welding machine and a Bulgarian. Of course, the skills of working with a welding machine will be needed here, if you have a brazier, a barbecue will not be much difficult.

(5 estimates, Average: 4.80 out of 5) Loading ...

sam-stroitel.com

How to make a brand from car drives?

It is difficult to part car owners with old wheels. And suddenly come out! And they lie in the garages and in dachas, and wait for their starry hour. And now it came! There is a wonderful idea to use wheel drives under the barbecue. A specialist with golden hands will easily gather a useful thing for himself and will enjoy the quiet summer evenings with aroma of fried skewers or pisms. The family is happy, money in the family budget is saved. And if the master also has a good fantasy, then amazing masterpieces are obtained from the wheels

To make a homemade brand from disks, it is not necessary to go specially to the market and purchased by expensive materials. Wheel discs have all car owners. You can go into any car repair shop, the wizard will gladly provide you with a couple of former wheels. It is worth noting the durability of the material and strength. It is unlikely that you can find a dent or scratch on the disk due to the thickness of the metal.

The shape of the disks is ideal for transforming into the brazier. Work on its manufacture occupy literally a couple of hours. Only infirm materials are used. The product is compact and can move with ease. The design is remarkably keeping the heat of fire, not yielding products of well-known brands. Such a brand can be used for other purposes. It will easily fit into the conditions of hunting or fishing, becoming at the time of the hiking kitchen. And there is already an assortment of other dishes - ear, pilaf, stewed potatoes and much more.

The design of the furnace provides an air flow that supports the necessary heat temperature. Homemade brazing is easy to clean after cooking. He does not burn, withsting fire for several hours.

It is even a child who will even work out how to work. Coals are laid in the lower level. The grill is put on top of the grill, dishes. You can do without it, fry traditional meat on the skewers.

The heat goes below, the cooking conditions are the same as on the usual mangal. When smoking, it is necessary to close the upper output. This will ensure the drainage of wood and the formation of smoke. Each owner makes a barbell under himself, but the main work on its manufacture remain common.

With all the advantages, there are disadvantages. One of them is a low height. Cooking is too low. The thrust may not be enough, and the barbell can just fade. Another minus is a small amount of firebox. Many users compare design capabilities with hiking bricks that are used as coasters under shampuric. But this, of course, is not quite so.

The world of self-made mangals is diverse. The craftsmen turn barrels and cylinders in the roasting.

Mangal from autodyskings offers the following functionality:

• cooking on skewers of kebab or grid;
• b-B-Q;
• cooking in dishes. Commonly used cauldron;
• smokehouse.

For the cottage such a brand is the ideal option.

There are several embodiments of mangals. The simplest model is called a simple grill. There is nothing complicated here. Coals are laid in the wheel, and everything is optional from above: skewers with kebab or meat on the grid.

More features have a double design. By using two wheels, the product becomes higher. Top puts Kazananok. There is a uniform heating, which ensures extinguishing. In a closed oven, you can smoke food. Smoke remains inside the design and is displayed through a special discharge.

There are models universal. You can do everything: kebabs, dishes in Kazan, smoking. Such a brand can be with legs without them. For the manga from one disk, the stand is required. Double and triple mangals may well do without it. The lower disk becomes the very stand. There are limitations when using such a mangal. If the earth after rain or snow, it will prevent the formation of the heat. You can not put a brand on a wooden floor.

Before making a mangala, you need to think through its scheme, what functions need to get from it. After determining the number of disks, you must prepare the tools. The skills of ownership of the grinder and the welding machine will be required.

Despite the simplicity of manga manufacturing, there are questions to the choice of disks. What car is best to use? Find the wheels are not a problem. Any tire fitting will be happy to share their surplus of autodyskings. Experienced drivers believe that the best discs from the truck are best. Most optimal option It is considered wheels from the KAMAZ wheel. They are made of thick metal and will not ruin up to 40 years. The same can be said about disks from any cargo transport. But the disk, for example, from a minibus will last up to 20 years.

In principle, the wheels of any car are suitable for the role of mangala. It is made from stamped car discs. They are made of high quality steel. The duration of the mangal depends on the fuel. From coal, the product is quickly roasted.

The idea of \u200b\u200bmangal from car drives quickly spread throughout the country and many began to think about its embodiment.

Before proceeding with welding, it is necessary to conduct a revision of all necessary.

It is necessary to prepare the following equipment and tools:

• rims;
• rust hardware brush;
• bulgarian saw;
• welding machine;
• drill;
• a hammer;
• bolts;
• file;
• nozzle for cutting metal;
• steel rod (profile pipes).

The latter will go on the legs under the brazier. Four supports for stability are recommended. The three-way on an uneven surface can collapse. From the disks you need to remove rust. The surface should be treated by a Bulgarian saw. Installation is carried out welders.

All work is carried out in compliance with safety. Be sure to use personal protective equipment. When conducting welding, your eyes should be closed with points or mask, work only in special mittens. When working with the grinder, its disk must be kept at right angles in relation to the subject. Otherwise, the disk can eat, and its fragments will fly. Works only in special glasses.

It is worth starting with the easiest model - this is a single circle on the stand.

To create such a product, you must perform the following steps:

• cut internal partition. After that, the workpiece becomes like a barrel;
• there are discs with a large number of holes, then they must be closed;
• the plate should be boiled, but leaving the bids for purging coal;
• on the sides of the bottom with welding it is necessary to fasten the legs. Their optimal length is up to 45 cm;

• then you need to clean the cuts. In the side of the side to make the window to keep track of the fire and clean the contents of the design;
• the grid for frying is best to leave removable;
• it remains only to privar handles. This will add comfort when operating the manga.

Another mantal version with your own hands is smoking. Two disks will be required. This option can be considered universal. You can cook not only kebabs, but also grill, stew food.

The work is simple and includes the following steps:

• it is necessary to connect two parts per unit;
• to keep smoke, the lid and the removal system is necessary, so in the upper disk you need to leave the partition;
• the lower disk should be eliminated from the partition, using a welding machine to dock both disk with each other;
• need to fight legs;
• in the middle of the lower disk, you need to do the door;
• upon completion of the work, it is necessary to carry out the design. This will make it possible to clean it from gasoline and oil;
• to give a presentation product, you need to cover the thermocracial desk.

Before that, you need to remove rust residues. This can be done with a rigid brush or with a special shock for a drill. It will not be superfluous to walk once again on the sides of the mangala emery, then degreased and you can start painting.

Options with mangals can be inventing a lot, especially in terms of design. All of them are original and always cause interest. But how many sincere joy around when they find out that the brazier is made with their own hands from ordinary disks.

Old auto parts can be excellent solution To create new, unique products. The idea with mangals is very original, the human thought develops it all the time. It can be a design on the suspension, a barbecue dispenser, a brazier with a lattice lifting with a jack, design with a spit. These are all portable models.

There is a focus on the covered veranda. The brazier is installed on a brick stand in the very center of the room. To ensure subdivine air, an empty space is left under the casing of the focus. The brazier is laid brick. There is a round table around it, a shop is set. It turned out the focus, around which you can sit and warm up. A cozy atmosphere has been created to enjoy delicious food. In winter, you can drink tea, inhaling the aromas of fried food.

You can set the brazier by any material. Such a gazebo will be a favorite place to meet family or gatherings with friends.

It is worth noting that after the autodynki passed the trials by the Mangalom, they began to look for other applications. For example, as a stove for a bath or burzhuyki for the house. Designers went further and offered to decorate the apartments with plants from the disks. There is even stylish solution Use discs as bar chairs and washbasins. It is not worth throwing away, but take a look at the old things in a new way. It's time to make tuning old car disks!

About how to make a brand from car drives, look in the video below.

www.stroy-podskazka.ru.

Mangals made from car divisions have a number of distinctive features in front of other types of homemade mangals:

• Availability and low price material. If you already have a car, then get the old wheel drive will not be difficult. If you are not a car owner, then in any car repair shop for a small price or even free will give a pair of unfit wheels.
• Great strength - The thickness of the metal increases resistance to the appearance of scratches and dents on the disk, which extends the service life.
• Night manufacturer - Assembling a device for cooking kebab or other types of fried meat will take literally a couple of hours.
• Heat resistance - Metal, from which there will be a future brazier from the disks, is well holding a heat, not yielding in this mangalas of famous trademarks.
• Universality - A grill of wheel drives can easily be turned into a hiking oven or kitchen. This will significantly expand the range of dishes that can be prepared on it.

Coal or firewood is loaded in the bottom of the design, a barbecue grill or skewers - upstairs. If the dish is prepared in its dishes (for example, pilaf or ear), then the dishes are put on the grille or the wheel (provided that the diameter allows it to put it). The heat from the burning firewood or glowing coal warms the air inside the chamber, which makes the conditions of cooking as close as possible to ordinary mangalams.

If you want to use a grill of wheel drives as a smokehouse, then the upper air outputs are closed, and instead of firewood or coal, the chips are used or sawdust.

Forms of execution

MANDER FROM THE DISC OF THE WHEEL Has a few varieties adapted for different species cooking:

• Simple mangal - Coal or firewood is laid in the wheel, skewers are put on top. The simplest option requiring minimum of additional preparations.
• Double Mangal - It is made of two wheels. This design is higher than the previous one. It can be used to extinguish the dishes, suitable as an oven and has the ability to install a cauldron for the Plov.
• Closed oven - Closed design can be used as smoking. Smoke is assembled inside the device and comes out portion through small holes.

Mangal of wheeled wheels with their own hands

You can build a barbell and from a single disk from the car wheel. It will turn out quite simply and quickly, but such a brand will have low efficiency.

Therefore, first consider the device collected from two disks.

Sequence of steps for the manufacture of mangal of two wheeled disks Next:

1. Connect two disks together. To do this, you can use the Bulgarian or - if you can use it - electric arc welding. On the contacting edges, excess metal is cleaned so that the discs are better to enter one in another. So the furnace will have a total internal space.
2. So that smoke did not go out everywhere, arc welding independently or with the help of a specialist who knows how to handle it, close the slots and joints of the two disks. Without proper experience, you can burn metal.
3. The lower plane will play the role of the grate. To do this, you need to do the hole where the ash will be replaced. It will also be confused where the oxygen required for burning is coming.
4. Kazan may be put on the top plane. If it is good to cut the plane so that it can be removed and putting on, then you can also put the skewers or grille.

Making a simple mangal from autodyskings

1. On one side of the disk with the help of the grinder, the plane is cut. The resulting design resembles a small bowler with holes in the bottom.
2. If the holes are too large or their quantity is large, you need to put the second grille. So coals will not fall out of the manga, and the thrust will be less.
3. Three or four segments of a metal rod or a pipe with a length of 45-50 cm are used as legs.
4. The resulting cuts of the pipe or metal rods are welded to the bottom of the mangala. For greater stability, you can also make additional bolt holes.

Smokehouse from autodyskov

For the manufacture of smokehouse from car discs, you will need a minimum of two disks.

1. Two discs are connected to each other, as in the method described above (see brazier of two disks)
2. Then you need to make a hole for the removal of smoke. For this, the top plane of the disk is quite suitable. It should be carefully cut off so that then it was possible to put it on top and use it, for example, a cooking surface.
3. To the lower surface for greater stability, you need to fight legs.
4. In the middle of the cylinder discs formed from the connection with the help of a grinder, a rectangle is cut. Then the bolts are welded to the separated rectangle, and next to the edge of the cut - nuts. Thus, it turns out the opening and closing door.

Pens for carrying

1. For the manufacture of carrying handles, a wire with a diameter of 8-10 millimeters is suitable.
2. To give the Wire of the desired form will use vice and hammer.
3. With the help of nuts, the wire is attached to the housing.

Base for mangal without welding

1. Bruks with a size of 100x100 mm are connected and trimmed so that the square is.
2. Using a drill or drilling machine in the corners, holes are drilled.
3. Threaded rods are skipped through the holes, then the base is grouped.
4. Gaskets and washers are put on the threaded rods, with the help of the grinder, unnecessary parts of the rods are removed.
5. The installation hole is prepared and - if necessary - wheels.
6. The base is covered by impregnation.

Build a finished manga from disks

1. Using bolts with a smooth hat, the rack is attached directly to the Mangalu.
2. Bolts hats must touch the central rim.
3. Between the rack and the brazier, it is better to install a cap to prevent ash ingress inside the rack. Both the cap, and the rack (in any case, the upper part of it) must be covered with heat-resistant paint.
4. With the help of flanges, the rack is attached to the base and mangalu. Flanges are also better covered with paint.

Latest preparations

1. Since the design is extremely difficult, it is quite difficult to move it, especially when it is already cooling after cooking. To do this, it is better to attach to the base of the wheel.
2. You can attach carabiner to hang auxiliary tools.
3. For the grill you will need two lattices: the bottom is compact and frequent to keep coal on itself, and the top is wider to hold food. You can lay coal and on the bottom surface, but this is not suitable for all materials.

Detailed video on this topic

Painting

All items are better covered in two layers of heat-resistant aerosol paint (or any other heat-resistant paint). There are three main types of fire-resistant dyes:

• Silonyorganic - withstand up to 600 degrees. Despite heat resistance, more suitable for painting parts that are not directly in contact with the flame.
• Acrylic - Well in contact with the metal and grabbed with it. Consider surface temperatures up to 900 degrees, suitable for applying on the surface contacting with a flame or heating to high temperatures. Most convenient in aerosol form.
• Dry mixes - Silicone paints. Complex in applying, more suitable for industry.

We will analyze the process of painting by acrylic dye:

1. clear the brazier from rust or other plaque on the surface (for example, soot);
2. shake the paint cylinder for about two minutes;
3. from a distance, about 20 cm spray paint to the surface into one or more layers (each layer dries about 30 minutes);
4. after full drying of paint, grinding a barbell for a quarter of an hour.

Several tips:

• Counting a brazier is better in the absence of wind.
• Coloring is mainly the outer side of the mangala.
• It is better to wash and dry the surface after cleaning.