With the onset of the summer, it becomes impossible to sit in the house - I want to spend as much time as possible on the street. Today we will show you three ways how to make benches with your own hands.

Your option bench will depend not only from the selected model, but also from the materials available to you. After all, it is often a bench, with your own hands from the girlfriend, looks and carefully, and interesting.


For each option, the benches are needed their skills, but the first bench can even be able to make even one who has no special skills to work with the tool.

Benches do it yourself for half an hour

Here is an example of the simplest bench, which one you can come up with. In the presence of all materials, such a bench is going in a matter of minutes!

All you need is eight slag blocks with through holesFour wooden bar and construction glue. Brux is better to pick up the width of the holes in the blocks, but if they are a little already, then it is not scary.

Do not forget to handle the wooden surface of the sandpaper to avoid the title.

Blocks and bars optionally can be painted to give a bench more nice view.

It remains to install the blocks vertically, pre-lubricate the contacting side surfaces with glue, and insert bars into the holes. As soon as the glue dries, the bench is ready! Optionally, you can equip her pillows: it will be more beautiful and more convenient.

How to make a wooden bench with a metal frame

If you have at least minimal skills in welding, then here is a project that will suit you. The bench is on two metal supports and it turns out simple, but reliable. You will need a profile tube or a thick plate for supports and, of course, a wide board for seating.

If you are far from welding workYou can collect a metal frame on the corners and begged with metal screws.

After the bench is assembled, the metal legs should be treated with a primer for metal, which will protect them from corrosion and then paint the feet of paint for metal for outdoor work.

Wooden benches should be painted with varnish or paint for outdoor work. Such a simple version of the benches will serve you for many years.

You can experiment and create your own bench design. For example, such a concise designer bench is quite valid. It is done exactly by the same principle.

How to make a bench with the back

To a bench facing metal supports, it is not difficult to attach a back.

To do this, take metal plates and bend them at the desired angle. It is easy to do it even with hands or you can fix the edge of the plate and bend it with a hammer. Plates will perform the role of support for the back. One end fix the plate from the bottom under the seat, and to another end we screw the back.

Bolts on the back (and on the seat too) it is better to drown into a tree so that they do not create discomfort.

If not hunting so mess around, you can use a round-cap bolts.

A more advanced solution of the back - attach it to the frame, and not to the seat. Such a design is definitely more reliable.

To do this, you will have to weld some details at an angle, because on a bench with an inclined back is more convenient to sit. And this requires great accuracy.

There are special devices that allow you to fix the parts to be welded at the right angle, they are called magnetic holders or positioners.

But there is a "folk" method. Make a wooden blank and attach details to her at the time of welding. So you can cook the required amount of supports, accurately withstanding the same angle.

It remains to attach a back to the frame, and the bench is ready!

Benches do it yourself from old furniture

Old unnecessary furniture can still serve us at the cottage. Practically from you can make benches yourself.

We do not throw a unnecessary baby cot, but make a bench with it with your own hands. One of the bed backs - will be the back of the bench. The second back is divided into two parts: the lower part is the bottom front of the bench; The upper part is divided into two parts and serves as benches. The bench provides a convenient box for storing pillows.

Wooden bench is redone from a regular size bed. Provide a small pillow storage box in the seat, then you will not need to wear pillows from home all the time, and invent places to store these pillows.

Stretched beds? You can make a bench with your own hands from the old shelf - painted and made a pillow, that's all the work. But this simple shop can turn into almost the throne if you have an old unnecessary door in stocks. From it you can make a beautiful high back for the bench. By the way, for the same purposes can be adapted and old wooden windows

Even if you do not have any single boards - you still can make a bench for your beloved dacha!

That's all! Simple benches With my own hands it can be done in just a few hours, while not particularly spending on the materials. And she will definitely become a favorite holiday destination for the whole family. After all, on the bench it is so nice to read, drink tea, chat with friends or even work, taking a laptop with you!

It turns out that the cottage can be appropriate for benches do it yourself from wood, moreover, not the worst, the week of the park or Square, where we met them most often. And if before that it seemed to you that everyone is similar to each other, be sure to read the materials of our article to make sure how much this subject can be diverse, creative, solved in different stylesBut, at the same time, invariably convenient and useful for country life.

Benches for the garden from the tree do it yourself

The most simple varieties benches for the cottage from the tree do it yourself - These are options for which neither the back is not made, nor armrests. They can be easily found in the middle of an extensive garden, because it is more needed to sit down or put a heavy cargo. The absence of the back is sometimes perfectly compensated by the presence of a retaining wall of the back, which is why the sitting person turns out to be protected from a draft, and there is an opportunity to learn if such a need to appear.

But if you crush your head with the manufacture of such things, then it is worth doing something more ambitious. Especially since if you are familiar to the base set of tools and you have already had to work with boards and a bar, then such work will definitely not be for you hard. Where is the most important to choose exactly the option wood benches do it yourself, photo which you will enjoy more than others so that it fit into the existing landscape design. And, in fact, when it comes to garden benches, it is very important, since at the same time they can be used for furnishing both indoors and in the open space (portable options are very, so much), so it is worth deciding whether The design is strict, classic, concise, or you want to turn the craft into a real art object.

Simple bench do it yourself from wood

Moving on the logical path, we will start a review from examples Simple benches do it yourself from wood. And, simple it is just from the point of view of the process of its manufacture, but appearance It can be supplemented if desired interesting decor. Yes, and in principle, the most simple shops are many years unchanged leaders among popularity.

To deal with the bench and the stages of its assembly simply, even if you do not use photo and video tutorials. What to say for simple benches with your own hand drawings They are the main board to which two wide legs are nailed. If you want this to be sufficiently large (for example, to put it on the terrace for receiving guests or install along a long alley), it is necessary to provide additional legs that are mounted in the middle or at an equal period of length. For fasteners, it is used by standard fittings or at all bypass the bars of the tree together with the tree screws or nails.

If you want to add all the design of stiffness and, at the same time, make it in any interesting style, you can add interesting structural elements, for example, as supports that you can see in the photo above. Here you see that the project is complemented by two additional beams and inclined boards. The result is a very durable and very beautiful product. Another simple example is a variety, since it is they who make an elementary design a very interesting product. In terms of cost, it will be somewhat more expensive, as the timber is noticeable more than the boards, but ideal for those who chose the national style for country buildings, chopped huts (bath, gazebo, and so on).

As for the decoration of an existing product, then it is best to use or multi-colored paints, or appliqué - decoupage technique. Both of these options are illustrated in the photo.

Garden benches made of wood with their own hands

And yet, in most cases, we do not have enough simple, ordinary garden benches of wood with their own handsSince the functions that are placed on the furniture much more than just temporary rest from the works of the righteous in the middle of the garden. It will be much more comfortable if you can lean on a comfortable back, climb on soft pillows, unsettled from above, put a plate or a glass on the armrest. Generally, new furniture It must be no less functional and useful than.

Before looking ready ideaswe will pay your attention to projects benches do it yourself from wood, drawings which will allow us to assess the complexity future work, Calculate the budget and cost of materials, as well as relate to your strength. In the photo at the top you see several examples of such drawings, among which there are both simple and more complex, for which you will need to create several additional items.

Ease of use ready for garden benches of wood with their own hands drawings It is that in advance the desired sizes of each board (namely, they are the most common variety of material), you can save time and cut them on the specified parameters in the store. Due to this, further the whole process will remind the assembly of cabinet furniture, you will sufficiently connect needed elements Between themselves, fasten them, and then process and lead to the desired appearance ready-made product. Such a technique is very often used by homemade amateur masters to make faster, seemingly complex crafts, like a gazebo, porch or.

You can also find drawings in which the product would be made entirely of wood, but using other materials. In this case, you may need, for example, a metal frame, which is attached to the backs and seats. Very popular to date seats that are fixed using slag blocks or similar building material, moreover, it is helped to make work faster than these technological recesses within each brick. The finished result of such work, when we can see in the photo above.

Make a tree bench do it yourself

A couple of examples like make a tree bench do it yourselfmay tell you in which direction your ideas should move. Since the stage of development of the project and drawing up the drawing has already passed, now we will now move on to the practical side of the execution.

The first stage is wood processing, and useful power tools help us to speed up the process. Thanks to it, we are much faster thanced the surface, clearing it from possible roughness and the dominance, as well as give all the ends rounded shape. This will help in the future to avoid injury if you hit the sharp edge of the benches.

The assembly of the main elements begins with the legs, they must be fixed using for this stretched for the entire length of the future the timber. For greater reliability, the strapping makes a double, top and bottom so that the future shop can withstand a fairly large weight. The boards are fixed to the top bars that form the strapping, but they are connected to each other so that the gaps in a couple of centimeters remain between them. This technical necessity, because the air will be better to circulate, and moisture (rain, irrigation systems) will leave the surface much better.

At the next stage, make an additional strapping on the legs of two or one bar. After that, it remains only with the help of two boards to form a back and as a result you will get so cute garden bench.which is depicted in the photo. On this process, its production does not end, because it must serve you for a long time. And for this you need not to shake on high-quality paintwork materials and impregnations, thanks to which a fully wooden product can be without any problems on the street under the open sky all summer.

Often the need arises make a garden bench from the tree do it yourselfUsing any simple, infirm materials. It is difficult to say today whether the Furniture from Pallet is to save money or has already moved to the fashion trend section, when the cost of such a headset can be comparable to conventional varieties. On the master class, which you see above, is exactly an example of using multiple pallets to get a spacious and durable shop, which will meet all fashionable design tendencies.

Bench do-it-yourself bench with a back

Master class on the formation benches with their own trees with a backFor which old chairs are used, only begins a small section dedicated to creative ideas.

For the crafts, you will need two identical stools, which are removed everything except the carcass itself. If necessary, you can disassemble chairs and strengthen them, changing metal parts and fasteners, but general form Must remain authentic. A rectangular frame is hampered between them, as shown in the photo, then it is duplicated by another strapping below. In order to use the subject as much as possible, you can not just make the strapping, and fill the row of BRUSEV, receiving a useful shelf. A number of boards are nailed to the top and the entire finished product is painted in a single color to hide the fact that it is assembled using the recycling. You can decorate such a shop with soft pillows that are laid out on it from above, and the appearance is suitable for the garden, made in a classic, romantic style.

Concerning non-standard solutions, then such a product like a bench is so simple that you will have the most interesting options on your shoulder. For example, you can beat big trees growing on your site and make a place to sit right around them. Other interesting option - make holes right in the surface and put inside the pots with flowers or decorative trees. And you can make a whole hack with the opening lid to store inside all toys for the playground.

In addition, forget about the direct form, as the only correct and experiment with the corners and directions.

Most often is made of wood. It is understandable: it is the most affordable and "plastic" material that can also wake in the hands of a beginner. The main thing, go with the mind. Get the tool and theoretically to join. And after small diligence on cottage plot A place to relax in the fresh air will appear.

Any homemade bench Starts with the scheme. In the age of information, it is pretty easy to find inspiration, but the details for productive creativity sometimes have to search. So, on a simple request " drawings of garden benches from wood"Google issues many photos and schemes, unfortunately, deprived of the details needed to make these benches to do. And when is the bench scheme, which is actually important? Material, production process and, first of all, dimensions.

So, selected, based on preferences: Product with backDirect or with an angle installed, wide or narrow, long or calculated only for two people, knocking or installed on the ground. Next, the material is harvested. And you can begin to create.

Drawings of garden benches from wood

This, which can be done in one day. The idea is not new, but the drawing of the author. Bench, with their own hands produced according to the scheme, successfully performs its function for the whole season in the open sky.

Main drawing

Base bench

First, the side racks of the benches are collected in the following schemes:

Keep in mind: Any drawing, even the most detailed - is still a scheme, sketch, from which you need to repel. In the course of production, the details will still have to be adjusted depending on the quality and number of materials, the availability of the necessaryfasteners and decor options. It is a chance to give the will of fantasy and make an exclusive thing.

Another drawing of a bench bench

Bench drawing

General assembly plan

Assembling legs

Drawings of garden benches with a backrest

A wooden bench for giving is just longer if it is covered with a special impregnation. Such formulations are quite enough. Some of them more strongly protect wood, but change its shade. Others are able to protect against UV exposure and save wood texture. Oil paints The tree performs the same functions, but they cover the "Wooden Pattern".

If, sitting on a bench, you wish to relax and inspire, then to have it more logical from something beautiful: reservoir, flower garden or alpine slide.

Garden bench Do with your own hands - it's not a simple, but also a professional in a wood carving or in welding business should not be. It is enough to have small skills in working with a hammer, saw or a welding machine, materials and desire.

Soon you will have comfortable and beautiful benches For the garden, made by their own hands.

Having a desire I. necessary materials, to build shop shops will not work

Necessary materials and tools

Garden shop with a creative approach can be made from virtually anything. The most optimal and simple option is a wooden bench for which the materials will need boards and varnish with a primer, and from the tools - a jur capital with a jigsaw.

If you want to see a metal bench in my area, there will be a completely different set of tools: welding machine, metal pipes, a device for flexible pipes, grinding machine.

If there is nothing of the listed, and the desire to see the bench on the site is large, you can use any prickly materials. Bricks or automotive tires with a board in the middle, wooden boxes can also serve as a bench. Even out plastic bottles And cardboard can be built a cute bench.

Step-by-step instructions for the manufacture of bench do it yourself

Garden benches of wood with backs

Most often there are two varieties wooden benchesMade with your own hands: Bench ordinary and bench with the back.

For convenience, before starting work, it is better to draw a drawing, choose the size of interest and buy suitable boards. If there is no such possibility, you need to use the electric jigsaw or saw, and independently prepare the elements of the shop.

About the types of perennial fast-growing shrubs for living inges, read.

You will need:

• 5 boards 1.5 m in length and 15 cm wide, the thickness is better to choose 3-4 cm;
• 2 legs that will also be supported for the back - 900 by 150 mm and a thickness of 3-4 cm;
• 2 Front legs - 360 per 150 mm with similar rear legs thick;
• brussia 40x40 mm;
• screwdriver and self-tapping screws;
• varnish and impregnation;
• electric jigsaw;
• sandpaper.

The drawing will help you in the manufacture of a garden bench.

Prepare all the necessary materials, you can proceed to business.

Before fastening the boards, they need to be well treated so that the rest on the bench brought pleasure, and not the off-bes. The longest boards that will go on the seat and the back, you need to span using sandpaper (or grinding machine).

If there is an electrical runt in the house, it is necessary to make the shape of the board of the round.

Billets for the rear legs need to be modified by giving them the right form.

The legs, which are also part-time support for the back, process the grinding machine

We take a board with a length of 90 cm and mark the division of 40 cm - the height of the shop. From this division at an angle of 20 degrees, we cut off the upper part of the jigsaw board, while the board should be an edge. We get the back leg and the angle of inclination of our future back.

The most difficult and important is the cut, it should be smooth on both blanks in size and depth.

We rebuff the bar in the width of the shop - 50 cm. We connect the legs with it, better and from above, and below, so the shop will turn out more stable. Distance between legs 28 cm (front and rear).

Three long boards with self-drawers with a screwdriver screwing up to the upper bars of the finished legs, with the help of which we associated them.

We collect the back of the bench. The two remaining boards are secured on the previously prepared section. The distance between the seat and the board - 20cm, boards - 2-3 cm.

You can strengthen the design. To do this, the legs should be attached to the lower strapping of the legs along the length of the shop. This will give even more reliability and stability.

Cover the bench varnish to give it decorativeness and durability

Garden benches made of wood without back

Similar to the actions described, you can make a simpler bench without a back. For her, we need all the same, except for the boards of 90cm going to the rear legs, instead two more boards 36cm in length. She is going to the same principle as a bench with a back.

Garden benches made of metal and wood

Making a bench made of metal and wood is much more complicated than just from the tree, but it looks stronger and sufficient.

You will need:

• metal grinding machine;
• welding machine;
• scrolls;
• metal pipes 30x30 mm;
• metal primer;
• wooden boards for seating and varnish, for processing.

On how to make a windmill of plastic bottles with your own hands, read.

Frame for seating. Cutting a pipe for 4 parts: 2 to 1500 mm, 2 to 400 mm. Weld in the form of a rectangle.

Legs. Cut from metal pipes 4 identical pieces for legs 460 mm and weld them with welding machine To the corners of the rectangular billet.

Back Bench. A tube of 440 mm is welded to a pipe of 1500mm in one direction. Then this billet is welded to the rectangular part of the bench.

The design is ready, it is necessary to sweep the welding seams, polish and cover the lavender of the primer.

To give stiffness between legs to the back (inside diagonal) and the seats can be welded additional metal ribs.

Wood and metal shop ready

Seat. For the seat, it is preferable to use wooden boards that need to be processed before screwing, walking with sandpaper.

They are attached along or across depending on your desire with bolts (better with rounded hats).

IN metallic frame With the help of electrical drills, holes are drilled in which the bolts are screwed. You can also use metal brackets, then the drill will not need.

Finishing mounting work, Wooden coating process lacquer.

Garden benches of stone

Garden benches of wood beautifully look, but they need careful care. But the stone benches are not speculating in maintenance and easy to assemble.

If there are insensic stones in different sizes on the site, of which you can build a practically exclusive shop.

Take large stones and lay out the seat and back of them. From small stones laying armrests. We put out several decorative pillows and you can stay rest.

Such shops are uncomfortable in moving around the site, but they look original.

We make a bench for the garden themselves

Description

Instructions for making a garden bench step by step, each step is described in detail and illustrate

Viktor Sergeev

Garden benches are the most popular small architectural forms. You can make them any sizes and structures, but besides your direct purpose, the benches are performed and a decorative function. You can make your own hands for yourself a garden bench, using our drawings and photos.

How to make a bench from the "thrus" materials

The easiest way to make a bench is made of wood. This is a traditional material for sadroom furniture, affordable and easy to process. But in this case, it can be saved by choosing as the main material the one that literally lies under the legs.

The first option is trees, rods and stumps from the same site or nearby forest stitch, in which the sanitary logging is carried out.

Gently cutting off a couple of medium in size, they can be used to base bench. From the jeres to make the lower crossbar for stiffness of the structure. And for the seating to dissolve on the circular part of the barrel. If there is no equipment for longitudinal sawing, then you can take an unedged board with a thickness of 75 mm.

In this example, the bench is already more comfortable - in addition, in addition to the seat there is a back. The model is a little more complicated, as it will have to find a higher part of the trunk and to process it in two receptions - at first to make a profile cut by the "ledge", and then the workpiece to dissolve into two halves.

And to collect the following bench, you will need:

• two short logs of one diameter for the base;
• two medium porsi thickness for backing support;
• one long log, collapsed by two halves (for seats and backs).

In short logs, you need to choose a groove so that a long log lay in it. Then the seat is fixed in the grooves, and each storm is fixed at two points - to the base and the seat. For fastening it is better to choose a powerful samongate tree bolts.

Another budget material for cottage bench is pallets (wooden pallets). But not any pallet is suitable for the manufacture of garden furniture. Ideally need from good edged board, the so-called europallet, which can be found in the EUR marking.

In principle, the standard euro tray width is somewhat large for the seat - 80 cm. You can shorten it up to 67 cm, cutting along the contour of the central bar. But you can not do this. Here are some examples of simple designs with different options bases and seats:

1. Bench of four pallets over the width. Three serve as a base, and the fourth back. The backrest pallet will have to take part of the support bars, and the rigidity of the bench is to provide with wooden plates.

2. In this case, four pallets are also used, but already cut. For fixing the backs, three ropes woven oblique, and for decorating - wallpaper nails.

3. This bench is made of only two pallets. One whole, and the second cut and, as it were, bent at an angle - it serves simultaneously and the seat, and the back. The design is good for its mobility - small wheels stand as legs.

Perhaps the only inconvenience of the use of the European Pallet as a starting material is the standard dimensions of 80x120 cm. They are to some extent limit opportunities for creativity. The use of conventional sawn timber (boards, bar and bar) allows you to make a bench for giving for every taste.

Board and Barlok.

Immediately it is worth saying that any drawing of the bench can be corrected for specific conditions. The only restriction so that the thickness of the board and the cross section of the bar was sufficient to carry out carrier properties.

Below is a drawing of a bench that is made of only three "paired" elements:

• seat and back;
• short support (rear leg) from the board in the form of a trapezium;
• long support (front foot).

1 - front leg; 2 - rear leg; 3 - seat; 4 - back; 5 - front view; 6 - side view

The result is a steady design with a triangle at the base and two transverse ribs of stiffness.

This is how this bench looks "live."

On this drawing bench in a more complex performance. For its manufacture, you need a 40x140 mm board (supports, back and seat), 40x70 mm bar (short bundles of supports) and 20 mm board (long bundle between sidewalls).

And this is the same design, but using a board and a bar with a thickness of 75 mm. Small differences in the base and fastening of ligaments are not fundamental.

It is fundamentally only one condition - the board in the seat is attached with a small gap sufficient to compensate for the extension of the tree at high humidity.

Large forms

Veneers look original in "Large format".

For example, this is the "fat" unedged board across the entire width of the log. Covered with transparent varnish, it transmits the natural beauty of the tree with all the color transitions.

From the rounded log, you can build not only a cottage or bath, but also such a garden bench.

And from the bar you can collect an original chair that can serve not only under a canopy, but also outdoors - removable pillows in bad weather are easy to put in the house.

Stone and tree

Stone, like a tree, also organically fits into the countryside landscape. Of course, a smooth plate in nature is practically not found, but you can use the saw stone.

The following option is easier to execute - the bench is composed of small blocks of wild stones. And since such a surface is not only cold, but also uneven, then no pillows can no longer do.

Pillows add comfort, but they have to constantly bring and endure. That is why for seats in garden benches, regardless of the material of the base, apply a tree. This is how such an original bench, at the base of which the Gabion is used (a cell from a grid filled with stone, rubble or pebbles).

No less popular for the manufacture of the base of the Bench concrete. But to do at once a composure form for the fill is difficult, but a small formwork is simple. And even the "cold seam" when filling in two taking structures (such as in this photo) will not affect.

Another option artificial stone - Hollow building concrete blocks. It is enough to spray them with a good masonry glue among themselves, and in the cavity lay a bar, and the bench is ready.

Metal and tree

The simplest pavement shops on the metal frame use a square profile.

You can cook profile pipe Two sidewalls in the form of the letter "H", and the wooden seat from the massif will also serve as a "rigidity edge".

In the following example, an array of wood is also used as a stiffness element, but the supports are made in the form of a square with a cross-line for fastening the seat.

And this is the simplest self-supporting design of a square profile, in which the strength and rigidity of the weld base is sufficient to make the seat from a wooden bar.

The following photograph shows a factory bench.

But if there is in the domestic workshop of the pipe bender (and it is easy to do and with your own hands), then bend two types of arches and "wave" from a round tube. Then the metal blanks must be welded, put plastic plugs on the legs (sold under any profile and the size of the pipe) and fasten the bars on the "wave".