Restoration or independent manufacture Furniture is a rather complicated and responsible process. This is associated with the peculiarities of certain types of materials and apply certain types of coatings on them.

That is why the question of how to paint a wardrobe from the chipboard is very interested in many masters.

Phased process

First you need to say that such work is pretty severe and tedious. People wishing to figure out how to paint the cabinet from laminated chipboard or other similar materials, do not even imagine, with which they will have to face.

Preparation

• To begin with, all the product will have to disassemble. At the same time, professional wizards immediately recommend paying attention to the quality and state of the fixing elements and, if necessary, replace them.
• Asking whether it is possible to produce staining of lacquered or laminated surfaces. It is necessary to understand that at first all the design elements are subject to Ocaw. In this case, the old coating is completely removed.

• After that, the instruction on the restoration requires applying to the surface of the primer. It will protect the material from various kinds of influences and increase its level of adhesion. (See also Article.)
• Next, the surface is putty. To do this, you can use special compositions, separate attention, paying defects and irregularities that have arisen during operation.

• Some masters prefer to put a putty only on problem areas, because they think that the less it will be, the better. However, if we are talking about restoration and subsequent staining, it is worth covering the entire design.
• After that, all the elements are once again skyrin using low-grazivial materials to give the surface smoothness.

• At the final stage preparatory work The wardrobe is processed again and give it to dry. At the same time, the benefits telling how to repaint a DSP cabinet recommended to withstand the time interval of at least 4 hours.

Tip!
Experts argue that all shut-off elements and other fittings for the period of operation come to an unfactive state.
Therefore, they need to be replaced, to new products, even if visual defects have not been detected.

Painting

• At this stage, you need to choose a dye. It should be remembered that the price of modern materials To work with wood, and it is the furniture very high. However, the scope of work is small, which involves aligning all expenses.
• If there is no desire to acquire specialized formulations, you can use conventional oil or alkyd paint.

• Apply material on the surface is best with a sprayer. If the work is performed with your own hands, it should be leased or use paint cans. Otherwise, the switches to avoid almost impossible.
• It is worth noting that all such works need to be produced in a well-ventilated room at a certain temperature and humidity.

• The field of how the first layer can dry up an additional primer and apply paint again. It is so prevented by the appearance of oil spots or hid the texture of wood.
• When all the work is produced, the closet must be assembled, after which it is possible using paint to adjust defects or irregularity of color blending. It is worth noting that it is best to make the assembly after applying the first layer of paint with its subsequent drying. (See also Article.)

• Many benefits telling how old cabinet From the chipboard to paint, recommend after all layers are applied and dried, treat the surface with varnish. This will serve as an additional protection and give the colors of contrast and gloss. At the same time, professional masters claim that it must be done in a few layer with thorough drying. (See also Article.)

Tip!
The use of specialized or multicomponent compositions will significantly simplify the work, but when applying them must be observed a number of certain conditions, which at the same moment it complicates it.
Professional masters are always looking for options to relieve their work and at the same time reach the highest possible result.

Output

After reviewing the video in this article, you can get detailed information about how painting is wooden furniture or products from chipboard. At the same time, on the basis of the text proposed above, it should be concluded that this process is quite tedious and can take away a mass of time. However, it is not necessary to have special knowledge or skills.

Sometimes, when finishing the premises, both internal and external, use of OSB material, chipboard, and so on. First of all, the use of sheet material is directed to the leveling of the surface, in the second, to provide an original coating that can be painted in accordance with designer decision premises. Let's try to figure out how to paint a chipboard at home.

Laminated chipboard is widely used for the manufacture of furniture. But most often in construction uses ordinary sheets, which subsequently need to be protected by dyeing.

Any work requires preliminary training. It is necessary to thoroughly think about what is necessary to achieve the desired result. For this we are determined which surface we need in a finished form:

• gloss;
• matte coating;
• tinted surface;
• decoupage.

We are also determined with the replacement of accessories or individual parts if furniture repair is planned. Based on the tasks, choose tools and materials that will be needed to realize the goal, how to change the color of the furniture.

From the tools may be needed:

• painting brushes of different designs and magnitude;

• rollers with foam and velor nozzles;

• scotch to protect surfaces when performing painting works;

• sandpaper with varying degrees of abrosiness;

• capacity for paint or varnish, better tray for roller;

• spatula.

From materials, depending on the planned works can be useful:

• shta mixtures;

• solvents or worms of an old coating;

• primers to increase the adhesive properties of the surface;

• pasta with a kel;

• impregnations for tinting;

• varnish or paint.

Additionally, you will need: gloves to protect the skin of the hands, soft rags, new fittings, if it is planned to replace it.

Tip! Be sure to use the primer. This will not only allow to increase the hitch of the lacquer with the surface of the chipboard, but also reduce its consumption.

Painting the chipboard begins with the correct definition of the material by which it is planned to perform this process. Collections for staining are selected very carefully in accordance with the scope of their application and characteristics:

• It is not recommended to use PF-115 paints. Especially from cheap options. They contain a rather large amount of lead. The furniture painted by such a composition can lead to poisoning.
• Is it possible to paint furniture paint on an oil basis? Experts do not recommend. Wood surface is better repainted by furniture varnishes or enamels.
• As for the coloring of the chipboard of chipboard acrylic or alkyd materials, there is a fairly large selection. It is carried out at the expense of aerosol species. They are very comfortable in operation and provide perfect coverage.

Acrylic paints are also valued for the opportunity to breed them with ordinary water, as well as due to the execution of the process of tinting in any shade.

After it was determined with the type of paints for the chipboard, it is necessary to calculate its required amount. The correct calculation begins with measuring the size of the area you want to paint. After the area is defined, it must be divided into the number that is indicated on the packaging of the material. In this way, the amount is determined. Unforgettly multiply consumable material on the number of layers. The standard consumption is considered to be 1 m 3 at 5-6 m 2.

Preparation and painting of chipboard

Any work on painting DSP at home consists of several stages. You should not neglect them if you end up want to get a qualitative result. Furniture, for the manufacture of which used a chipboard, you must first prepare for painting.

Before painting furniture from chipboard, you need to decide on a few questions:

• it is planned complete repainting and partial;
• staining design, that is, completely in one color or combined.

All stages will look at a certain example, how to repaint the chest. In principle, it does not matter that they repaint, the main thing is to deal with the process, and you can apply it to any furniture.

On video: painting products from chipboard.

Surface treatment

Before painting furniture from chipboard, it is important to correctly treat its surface and prepare for painting. Initially, the dresser should be disassembled separate elements. Remove all boxes, if possible, disassemble them and remove accessories. They will be easier to handle and paint the furniture from DSP with their own hands.

Important! Treatment begins with the use of sandpaper with a large grain.

It is necessary to bulk until old paint disappears completely. Also watch the surface not remaining fat stains and other contaminants. Otherwise, it is impossible to guarantee high-quality painting. When the movement is operated with scope and along the fibers.

After the coarse processing is completed, we clean the details of the chest of chips and dust. You can use flat painting brush. With the help of a vet, it is not possible to work. On the contrary, the chips of the chips will score into the smallest plates of the slab from the chipboard, which will negatively affect the quality of painting.

The main thing in this process is difficult to process permissible places. Finishing the process, again completely clean from chips. At the final stage, we wipe the details of the dresser with a wet rag, then we wipe the dry cloth and give it good.

Padding

Painting work should not be started without preliminary priming furniture details. The processing of their primer will significantly increase the quality of staining. The primer is better to use on an acrylic basis.

Painting furniture from chipboard is performed as a brush and roller. The main thing is that the layer is as thinner as possible. After applying the composition on the surface, we leave the part for a while for complete burden.

Selecting colors

While the primer dries, pick up the paint tone. If one-photon staining is planned, for example, in white colorThe special nuances will not arise. If it was decided to show creativity and paint the old furniture from chipboard in combined colorsYou should choose tones that are comparable to each other. We choose the main color, and already select the related colors, as if withdrawing the main palette.

By the way, it is possible to achieve brighter shades by adding a certain amount of white dye.

Before painting chipboard with dye, it is necessary to apply paint on an unnecessary wooden surface to determine the natural shade. This is justified by the fact that acrylic paints with drying change tone.

Paint and varnish

Let us consider in detail how to paint chipboard with your own hands. At the first stage, we are determined with coloring mortar, or rather with its quality. It must be optimal consistency, not liquid and not dense. Also should not contain dry grains.

Next, we are determined with the amount of layers applied. Here the consumer itself must decide, which takes into account the condition old furniture From chipboard, personal preferences and other factors. But, experienced masters advise to apply at least two layers. Be sure to apply each subsequent layer after completely drying the previous one. For uniform application of the layer, it should be painted using a roller or brushes that are conducted in the same direction.

The next stage is the fastening of paint with varnish.

To do this, waiting when the paint is completely dry, we apply to the surface of the varnish with a foam rubber. For this, Macham Porolan in a container with varnish and evenly neat movements applied it on a layer of paint. For a better effect, we repeat the procedure several times, naturally after drying the previous layer. Having waited for a complete drying of the last layer, you can collect the chest of drawers.

To give originality or achieve an old design, you can perform additional strokes. To hold gold lines or artificially to form. The main thing is, during the fulfillment of additional strokes, do not leave the heights and other blots. You can spoil all the work done. For insurance it is better to use greasy tape.

Features of laminated chipboard

Often the question arises how to repaint furniture with a laminated surface. The process at painting of the laminated chipboard is almost no different from those that are carried out when working with painted material. It consists of three stages:

• treatment;
• primer;
• painting.

The only difference is the process of initial Okurization of LDSP. Laminate is not completely removed. The main thing to bring it to the condition of the roughness. The primer should be applied to the surface, the composition with penetrating properties for the laminated chipboard is not suitable.

So, pick up the tone of the paint and having studied the technology of execution of repainting, you can restore the color of the furniture, update the table or make painting of the floor from the chipboard. Painted in this way the thing can last for a long time.

Restoration of chipboard (1 FIDEO)

In any house, the closet occupies a very important place. It is a pity that over time he loses its original look: the appearance of cracks, the sweatful paint make it unattractive, it comes out of fashion and looks irrelevant. We have to think about his future fate.

At a minimum, two outputs have from the situation that has created:

• buying new furniture;
• updating the old cabinet.

You can give your own hands to Chiffira new life, turn it into a unique object, while saving considerable funds.

How to renovate?

Any ancient cabinet requires a small restoration that will significantly improve appearance.

We can restore the Chiffonier and independently, if you use the councils of specialists:

• For the processing of the elapsed tree, a metal brush is used, after which the dead fabrics are deleted.
• The small dust formed at the same time is washed away under the jet of water.
• Sometimes holes from carnations, some irregularities and cracks remain in the wooden elements of the cabinet. All this must be cleaned with a spatula. It is necessary to apply a few thin layers of putty on wood. Each layer must dry before applying the following.
• Then dry out all the layers in the fresh air for 1-2 days. You can not dry the tree in the sun.
• Sometimes there are metal parts in the furniture, which managed to be covered with rust over time, such places should be treated with a special solution.
• Then the renovated surface can be painted or decorated at your discretion.
• Self-adhesive film, imitating wood, stone, metal, is perfect.

How to paint?

The wardrobe, which came out of the fashion, but still quite strong and serves more than one year, you can simply repaint. This simple way creates new design Cabinets, chest of drawers and any other old furniture. At the same time, it is not only about giving freshness to sweat surfaces, but also a complete replacement color solvingthat add the originality of the product. Painting is the most common option to update the old thing. Despite its simplicity, it is necessary to approach this process correctly. For a durable result, it is necessary to pre-prepare furniture walls.

Below is a step-by-step master class.

It will help high quality and competently make painting at home:

• it is important to pre-clean the surfaces from the residues of the paint: one layer will easily remove the eats-petal disk, with multiple layers they will cope as special brushes;
• all walls, doors and other parts need to be taken manually or using the tool;
• alignment occurs by applying primer or putty to hide defects that occurred at long-term operation;
• it is necessary to wait for a complete drying of the leveling layer, and after that you can proceed to painting;

• to apply the coloring layer on all sides, take brushes, roller or sponge, however, quickly use the paint or spray gun. With this method, the paint is applied under pressure, so doors, shelves and walls inside the cabinet are proceeded well;
• as a rule, several layers of paint are applied. It provides a saturated color and good surface safety. Collect cabinet better acrylic, alkyd enamel or other quality paint;
• the paint should be allowed to dry completely, after which you can apply a layer of varnish. He makes a wardrobe glossy and brilliant. If you like the matte surface more, you can abandon the lacquer. However, the use of this coating has a protective function, prevents abrasion and gives a tone greater depth. You can use not only glossy, but also matte and silky finish coating.

Decor

If you decide to leave and decorate with your own hands the old closet, it is possible to decorate it different ways. There are many techniques that are used for decor.

Decorative plaster

This is a rather complicated version of decoration. First, the product covered old paintBe sure to handle emery paper. On the stencil must be applied decorative plaster Volumetric elements on cabinet facades. The stencil itself needs to be removed before the plaster dries. Then the uneven parts are smoothed with a spatula. Ready decorative elements Lacate or paint, a gilt or Patina under the antiquity is possible.

Photo printing

A wardrobe or just an old cabinet is very updated with photos or photo wallpapers. Any pictures increase using widescreen printing in printing house. The surface is decorated with panels or collage from photos, most often it is a wardrobe with smooth doors. However, the service of such a seal is expensive, so it is more often used a budget option - Wall mural, sold at any repair shop. Choose the most different topics - nature, beautiful cities, animals and a lot more. If you use starch-based glue, in the future it will be possible to change the faded pattern.

Stained glass film

Discover the outdated piece of furniture can be independently, without possessing special skills. Very simple to the glass door of the cabinet sticks the stained glass film in this season. This will add the presentation of old furniture. In addition to the decorative function, the film retains the glass from impact and scratches. It is very simple to remove the film, but looks like such a decorative technique very effectively, because the imitation is as much as possible to the real stained glass window.

New fittings

In the process of decorating there are no trifles. Each designer knows that 40% of the success of any interior is the details and accessories. In this case, you can disaggain to transform the cabinet, changing all the accessories on it. New handles are important.

Sorry if you have to throw out old, but high-quality furniture, especially wooden. But such products can be updated and used not yet one year. For competent selection of the decoration method, it is important to take into account the material and the degree of wear of the old cabinet.

Natural tree

Previously, wooden furniture was done very high quality. Before updating, remove the dust with a dry cloth. Then check the fastener, and if it is broken, it must be fixed or replaced. Inside the cabinet, it would be good to perform a processing with an antibacterial agent, a more fiscal option is a simple vinegar. He will destroy an unpleasant smell.

Then the choice of the method of decor.

• Toning.First, all surfaces are aligned with wood powder, selected in the tone of the cabinet. After drying the layer, uneven places are polished with sandpaper. Processed and smooth planes are processed by a special structuring tint for wood. Decorative tinting color Choose the darker of the initial hint of the cabinet. Such processing will completely transform the appearance of the product.

• Equality.Furniture made of natural wood can be "aged". The effect of stuffing under the antique surface of the cabinet is achieved as follows: The light tone of the tree is painted in any dark shade depending on the color palette of the room. Then, after complete drying, the paint must be grateful to a candle of several fragments, after which they apply light paint, for example, beige, white, cream. When after the second painted layer is wiping with sandpaper, threads will be visible through some bright places. That darker. When a dark cabinet is decorated, crabelles make. To do this, the surface varnish varnish is applied to the surface. After its drying, small cracks are formed, which are allocated with a dry pigment or oil paint. The desired shade.

Toning

Building

• Painted. This option provides for pre-staining of the furniture paint of a light shade. After drying the facade of the cabinet is covered with painting acrylic paints. If you do not have drawing skills and painting, you can write a wardrobe by stencil.

Chipboard

If the cabinet has a good condition, it will be possible to use the same decorating options that are used in the design of wooden products, excluding tinting. The wardrobe in poor condition involves replacing the door.

• Dark polishing. In our country, the cult model of such a cabinet was extremely common. The decor of this product is very complicated in terms of modernization, as the synthetic dark varnish, used earlier for polishing the furniture, is almost impossible to remove. In addition, others decorative materials It does not hold on it. Here you have to take a volitional solution and replace all the doors if they are in a bad condition. The well-preserved cabinet can be redone in one of two ways:

• Tupovka - Toning using a sponge. For application take a golden or copper paint metallic, which lies even on such a polish. Application technique is characterized in that in separate places the coloring layer is stuffed using a sponge up and down. Then the perimeter of the doors is decorated with a glued stucco from PVC. In the central part of each door pasted a socket made of stucco, similar to the design of the perimeter.
• Stencil ornament.To apply such an ornament, gold or copper paint is also used, but in the aerosol bubble. First passes on the door of the cabinet stencil in the form of an ornament. After that, the stencil is based on paint with the help of aerosol matte varnish, which serves as a primer. After 5 minutes a tinted aerosol is applied. After a five-minute expectation, you can shoot stencils.

Stencil ornament

Tupovka

Sometimes original idea Upon updating old things leads to a new one. A large number of Diverse and unexpected techniques recommend designers. Among them:

• Decor lace.In itself, lace or lace canvas uniquely and does not cause any doubts in aesthetic value. It is not by chance that for him there is always a mass of applications in the field of decor, including furniture. The exclusive design of the furniture is not difficult to do, using it. You will need lace and paint. Apply to the facade in the right place a lace cloth and spend it with a tassel with paint. Then the lace is removed, and a beautiful lace drawing remains on the facade.

• Decoupage. Perhaps the most stunning effect gives a decoupage technique. The cabinet is decorated with napkins that have a suitable drawing on their surface, they can always be found in any economic store. The drawing is cut, smell and then glue with special glue for decoupage. The surface with the blended patterns must be coated with furniture varnish. As a rule, it is applied in two layers. Especially good such decor looks on a light background. The cabinet, which was originally dark, before decorating it is pre-painted.

You will need

• - Sander;
• - Nulevka skin;
• - solvent;
• - primer or veil;
• - velor roller or kraskopult;
• - paint;
• - varnish.

Instruction

To paint laminated wood-chip, you must pre-prepare the surface, since the usual coloring without preparation will not lead to the desired result. LDSP has a smooth surface on which, even if it feels, but will not stay long.

For surface treatment, take zero sandpaper, grinding. With the help and remove the entire upper layer, which has impregnation from melamine resins and varnish. Work very carefully. Do not forget that under the protective layer is the usual wood-shaped, which will start paint, if the processing is quite deep enough.

Processed surface Wipe with solvent, apply a layer of primer with. Get time to dry for 24 hours. Apply the paint layer. You can use the paint any, since after grinding the surface you will get a conventional wood chipboard, which is painted by any means.

Apply paint with velor roller or. After drying the first layer, repeat the staining. After 24 hours, apply a layer of transparent varnish on the painted surface, after 24 hours another layer. Thus, you will get a solid coating that a few years will protect the chipboard from moisture and swelling.

Instead of paint, you can use the sampling or immediately apply a few shadow varnish. If you use the veil, then before applying it does not cover the treated surface of the primer. After grinding, just carefully treat the slab with a solvent and immediately apply the veil. For more intense color, repeat the application another one or twice, it depends on your desire to get less or more intense color.

Morilber dries over 12 hours. Therefore, after a specified period, you can apply a lacquer coating.

note

Laminated chipboard is a polished chipboard, covered in special conditions of a paper-resin film. As a result of lamination, the film is firmly glued to the wood cooker, providing high-end operational properties. In the 21st century, the laminated chipboard more and more displaces an array of wood from the furniture market.

Helpful advice

Laminated chipboard (LDSP) is a chipboard, lined with films having a paper base and impregnated formaldehyde resins. Lamination of the chipboard must be carried out in special conditions (temperature 120-140 C, the pressure of about 25-28 MPa), the resins are squeezed out of the paper film and spread through the stove, polymer processes begin to occur in the resin.

Sources:

• how to paint the laminated door

For the manufacture of furniture in the conditions of the domestic workshop, laminated wood chipboard is often used. Being made of coniferous and hardwood trees, LDSP has indispensable qualities, including durability and ease of processing. The main disadvantage of the laminated plate is that chips of the material are possible in incultful trimming. To properly cut down the LDSP, a number of rules should be followed.

You will need

• - roulette or measuring ruler;
• - pencil;
• - hacksaw with fine tooth;
• - electrolovik;
• - Circular Saw;
• - painting tape or scotch.

Instruction

Select the type of sawing, which will be used when processing the laminated wood chipboard. Straight cut is used to cut rectangular shapes used in furniture manufacturing. Some details of designer furniture require curvilinear cutting. Possible and mixed way to cut the chipboard.

Prepare the tools you need to circumcise the trim. You will need a saw with a small tooth or an electric bike. For cutting, you can also use a disk saw if the discs of the disk have a suitable size. To protect the laminated coating from damage when cutting material, prepare a painting tape or tape. To mark the blanks, a ruler is needed and a well-honed pencil.

Mark the sheet markup in accordance with the requirements for the finished product. Mark the pencil or marker from the ends of the plate of the point of the alleged cut.

To protect the stove from the chips, cover the latch with a painting tape, tape or another tape with adhesive layer. Laminated Chipboard It is facing the melamine film and varnish, which is applied at high temperatures and pressure. The ribbon will protect the edge of the cut from scaling and chips.

After the protective tape stickers, connect the pre-markup pencil.

Getting started to cut l Chipboard, Keep the hacksaw under an acute angle to the surface of the plate to make the edges as smooth as possible. Do not try to put it hard to the instrument, movements should be rhythmic and light.

If after cutting the edges turned out to be smooth, the product does not require additional processing of edges. If irregularities are detected, treat them with a file or rashpyl. The ends of the plate, which turned out as a result of cutting, become a veneer under the color of the plate surface to give all the product to additional protection and an attractive view.

Chipboard (chipboard) - one of the most common and available materials. For more than 40 years, it is used as a material for the construction, manufacture of furniture. Chipboard has both positive properties and negative. To attenuate the negative effects of this material, its staining is applied on a person.

Instruction

The advantages of this material are as follows: Low price (significantly lower compared to wooden shields, plywood);
a wide range of applications;
the possibility of waste disposal from woodworking;
ease of manufacture of various parts, in particular for furniture;
durability (subject to operational norms).
From the disadvantages of the chipboard, one of the most significant is an application in its manufacture of adhesive with phenol formaldehyde resins. In the course of operation of products made of this material, the effects of evaporation of these resins on living organisms may vary depending on the ambient temperature, humidity, coating methods, or painting products, but not fully deleted.
However, the main advantage of the chipboard (low price) is usually the top when choosing a material. Especially since there are ways to significantly improve the material, harm to a minimum. One of them is processing and staining of surfaces.

It is important to take into account that the better and better work on the cutting of the chipboard sheets, the less labor will be spent on the correction of flares final finish. Therefore, when sawing a chipboard sheet to make less burr and jar on the edge, in place of the cut, stick the adhesive tape. For sawmills, use a saw with small teeth and put it as much as possible to the surface, do not make too strong pressing. The resulting edge is shining the emery skirt. Apply putty, let it dry, polish and cover the second layer. If after it grinding will be visible defects (sinks, chips, etc.) again apply a layer of putty and pass it away. On the finished surface, apply paint. Color Choose such that it is combined with the basic color of the product. Instead of staining, you can use the ribbon to wet the edge of parts from the chipboard. Attach it with a sticky side to a polished edge (pre-removing dust). Then ignite the tape with a preheated iron. Another method of processing: Stripes made of wooden veneer or plastic Prepare and glue the edge.

Similarly, painting (coating) of the surface of parts made from chipboard is performed. Surface the surface with the sandpaper, put the spatula with a layer of putty, let him dry and polish. Apply the second layer of putty and, after drying it and grinding, cover the layer of varnish or paint. Varnish (paint) It is advisable to put in two or three layers. In addition, the surface of the chipboard can be bred by self-adhesive tape or plastic, which is attached to glue. At the same time it is important to carefully smooth the surface to remove air bubbles from under the lining.

Video on the topic

Helpful advice

Do not use parts of the parts from the chipboard of porous materials (carpet, fabric, etc.), because They do not reduce the selection of phenol vapors.

01.10.2014

When the furniture loses its former gloss and an attractive appearance, it is made to get rid of it. But if you replace the table or stool easily, then not everything is so simple with the cabinet. After all, this furniture is often someone's gift, inheritance or just a huge, terrible, but extremely useful in everyday life, with whom I really don't want to part. What to do in such a situation when the old wardrobe is tired, but I don't want to buy a new one or do? The answer is one - repaint furniture yourself.

In fact, paint the cabinet is much easier than it may seem at first glance. Especially if the aerosol cans are used. Indeed, in this case, neither rollers nor solvents or brushes will not be needed. The repair kit will include only sandpaper, painting tape, polyethylene (or old newspapers) and. How to apply all this? Very simple: With the help of abrasives, the surface will be prepared for painting, painting tape and polyethylene will help to cover the places where the paint should not get, and the aerosol cylinders actually become the main tool when painting the cabinet.

Important moment: Mandatory processing of emery paper is subject to lacquer-covered surfaces. It is also extremely preferably before painting to the surface of the soil and wait for its complete drying. Before using aerosol cylinders, they should be thickened to shake over a few minutes. And the spray itself should be carried out in several thin layers from a distance of 30 cm.

If you decide to paint the cabinet, then do not be afraid to use bright colors, apply stencils, unusual color combinations, draw pictures. Give the will of your fantasy! And stocking of a huge portion of creativity can be using special, thematic selection of photos from the company RusAvtolak.

Paint the wardrobe in the children's room is simple - it is enough to choose the most bright colors and diversify the doors with additional elements.

Classical Soviet slide can be easily turned into an extremely curious element of the interior

Fully paint such an extremely common wardrobe - case of several hours

How much changes normal cabinet, it is only necessary to repaint it high quality and remove the doors.

It is extremely easy to draw such bands - for this you need to smoothly glue the painting tape and grip hard. After spraying the paint, it can be easily removed and get this effect.

If you are going to paint your cabinet again, you should not forget about new loops for its doors.

If you have always received the mark "Excellent" in drawing lessons, you can paint the cabinet with the help of original drawings.

The rear wall of the cabinet can be diversified using conventional color and patterned oilcloth

Paint a closet like this - the task is extremely complex. But the result is worth it!

The strokes can be made a conventional marker with a thick pen, and then spray over a protective colorless varnish. Or take advantage of an aerosol cartridge, pre-encourage nearby surfaces.

Nothing difficult, but it looks very cool and fresh!

An excellent example of a real "Girl" work. Why not?

On sale Never meet furniture such bold colors. But to make it such a pair of trifles.

Want to paint your wardrobe also? In this you will help the usual homemade march!

Extremely simple work. But minimalism is now just in fashion!

We should not forget that aerosol paints are with different special effects. For example, this will look like a coating with cracker-effect.

A good job, but the doors fasteners could be chosen another.

In order to paint the closet like this, you will need only a few aerosol cylinders with paint.

The locker remains from the old slide can be easily turned into a pretty and independent element of the interior.

Extremely successful painting, which is perfect for the design of the room

Painting the wardrobe in such a nice color and apply patterns in view of the lizards much easier than it seems. Just try!

You can paint (and you need!) Even new furniture, if for some reason she stopped you like.

Sometimes, for resuscitation of furniture, it is enough only slightly "draw" paint ...

... or launder, clean and re-cover with varnish.

Want to paint a wardrobe in Vintage style? Not a problem - after drying, the paint neatly remove the coating from the corners and protruding surfaces.

If you repaint a closet to another color, then it starts to look and felt absolutely different. Checked!