One of the most popular types of wooden finishing materials is lining. It has a different profile, so that the surface has different species - From a smooth wall with small grooves, to waves of different sizes. Simply wooden walls Do not fit all the interiors, therefore it is often necessary to paint the lining indoors - at home or in the country.

What to handle the lining inside the house

In general, many believe that the lining indoors is better not to handle anything. Maybe so, but not in every climate and room, it will keep his original appearance for a long time. If the ventilation level is insufficient, wood can occur if it is in the sun - becomes dark gray.

With the formation, it is possible to fight only biological means - chlorine or active oxygen, and after - unambiguously impregnate protective compositions, and maybe and paint. With bitten wood it's a little easier: removing the top layer with a grinding, you will again get a beautiful color, but it will also last without protection against ultraviolet. Therefore, they decide to paint the lining inside the house or cottage.

Another point: not everyone likes wood in the interior. Just sometimes people get tired to look at her. I just want a smooth color surface. So also happens, and often. In this case, look for holling paint. Choose the effects of the characteristic optional.

Coloring the lining inside with shelled paints even because wood in natural color is compatible with all styles. But I want to sometimes hai-tech, for example. In this case, paint is suitable with metal particles or with a pearl (for example, Lignovit Platin).

All formulations for protecting wood can be quite consecrated for six main groups:

1. Protective compounds. There are for external and for internal work. Compositions for outdoor work additionally include protection against ultraviolet, which prevents or slows down the process of photobing wood - changes in color on gray. So if the impregnation is needed for the lining on the balcony, and he comes to the south or east, - you need a composition for outdoor work. Just pay attention, some of them paint the surface into pink or green - this is the result of a chemical reaction. Carefully read the description, because it is possible to paint the resulting color only with shelter paints or very dark tint.

   

2. Tinting formulations or verse. They do not paint the texture of wood, but give some shade. At the same time, a film is not created on the surface, wood does not lose its properties - it remains vapor permeable. Toning formulations contain pigment and can be weakly or strongly pigmented. If you want to have a surface with a pronounced structure of wood, take a weak fightened composition. Layers, maybe it will be necessary and much, but you can control the degree of "painting" wood.

   

3. Varnishes. Today, lacquer on the walls or ceiling is more popular on water based or aqualaki. They can be matte, semi-wave or glossy. Many have the opportunity to add a koler - simultaneously change the color. In contrast to traditional varnishes, water-based varnishes do not close the pores - The film on the surface remains vapor permeable, but the dirt is protected from absorption. Many manufacturers add UV filters and bactericidal components. Such LKMs are good for balconies or indoors of unheated with periodic visits - at dachas and in the baths.

   

   Varnish can be glossy, matte or semiam, and can give color - pigmented

4. Paints. This group includes compositions that create a dense film on the surface, through which the structure of the wood is not visible. The group is extensive, with different properties and price range - from traditional oil to latex and acrylate enamel.
5. Oils for wood. There are transparent, there is a pigment. Unlike varnishes, they do not create on the surface of a dense film, and absorbed into the fibers. Good formulations act like a lacquer coating, protecting against abrasion and absorb dirt. Only oils have no bright glossy glitter - matte or slightly shiny, like silk, surface. This is a great way to keep wood. Using certain application techniques using pigmented oils for wood, you can emphasize the texture (see below).

   

6. Wax-based compositions. There are three types of wax: solid, liquid and water. Solid wax before use is heated to liquid state, Liquid and aquatic (waxed azure) are ready for use. Wax protection is traditional and very effective, and new technologies allow you to significantly alleviate the process. The lack of wax - it is quite difficult to apply evenly, but on a pre-primed surface, it falls well.

This division is conditional: there are many mixed compositions that can be attributed to at least two groups. So there are impregnations that can be toned, and there are paints with protective properties. The difference is in the effectiveness of protection. The impregnations primarily protect the wood, and the giving color is a secondary task. With paints, the opposite is the opposite. Their main task is to create a beautiful coating, and protection is like an accompanying effect. If you need immediately and good protection and high-quality coverage, take the impregnation without tinting, and after drying, apply paint.

Another example of a mixed composition - oil with wax. These compositions combine properties and oils and wax, thanks to which the wood retains its own kind of longer times.

The question of which groups to give preference, each decides for itself. Different means solve various tasks and it is important to choose the correct properties that you need first.

How to paint lining inside: technology

For painting lining in "dry" rooms inside the house, you can use any of the types of paint. It is simply defined with the requirements for the decorative surface of the surface. If the lining is dry, it can not be impregnated with protective compositions, or choose paint / varnish / wax with appropriate additives. It is possible to paint it only on the one hand, leaving the back side of the unprocessed.

If the lining will be used in wet or unheated rooms, on the balcony, it is necessary first to heat it well with protective compositions from all sides, you can double. Only after drying the impregnation can be painted, varnish, in general, to give decorative properties. Another moment: when installing the wallboard on the wall or ceiling, it has to cut into pieces. Sections of sections in wet rooms must also be missed by the composition. Wait until it dry does not necessarily, but it is necessary to process.

There is one very an important nuancewhich many fans decorators are overlooked. If you want to get the color of the challenge of the professional level, you need to process each plank separately: pollute, paint, dry and only then collect the surface of the already colored wall paneling. That is, on the wall or on the ceiling, mounted already fully treated plank. Only with this approach from any point the surface of the lining will have the same color.

Good paint the entire surface of the wall, crumpled lining - difficult

If you paint the already collected surface, nevertheless places remain in the grooves and deepends, it is difficult large squares grind. Perfectly smooth surface exactly not get. The quality of the finishes in this version is not higher than the average. Painting the finished surface is permissible if you update painting. This must be done with different periodicity - depends on the operating conditions and the properties of the LKM.

The right painting technology is as follows.

Layers can be a lot: depends on the shelterness of the paint and on what effect you want to get. But in any case, the rule remains one thing: the composition on the brush should be little. Exception - impregnation or primer. They are applied with a well-dipped brush, but only those that without pigment. When applying pigmented protective compositions, there are rules for paints - the minimum required amount of composition is well underestimated.

Sometimes, even with careful rubbing paint, clearly visible stains. It is not a bad paint, but the properties of wood: somewhere pores absorb better, somewhere worse. In order to achieve smooth color in this case, the surface is primed first. You can use any typewriter or colorless matte varnish (water-based). After drying, the surface is grinning (aha, again) and then apply the required number of paint layers. Only in this case, after the first layer, the LX grinding is rarely required, and if necessary, then in some places, more often - on a spike or a groove.

How to evenly put the azure, butter or wax look in the video.

If the furniture quality is needed, the layers are even more: first the veil is applied, then two layers of soil. After drying, it is grouped to the complete surface of the surface first with grain 280, then 320, after removal of dust, the finishing layer is applied - varnish. An example of such work in the video.

Tree painting with texture preservation

It is possible to achieve a pronounced wood pattern using lazuries, pigmented oil or wax. These compositions lie pretty tightly, almost painted the structure of wood fibers. Any of the compositions described above can be applied with brush or roller.

When applied, the LKM takes quite a bit, first fragments catching the entire length of the lining. Then the brush or roller applied strokes are riveted over the entire surface. Leaving them for 5-10 minutes to absorb, for manifestation of texture, take a soft loud fabric and remove most of the oil. As a result, the figure is manifested much brighter than in original condition: more pigmented tools are maintained in the grooves, it almost does not remain on the protruding parts. The result is a pronounced texture. This reception is also called brashing or texturing of the lining. In the interiors, the wood treated in this way looks very decorative: both on the walls and the ceiling.

The process can be pushed into the video. Three samples were stained: two with the same oil with a pigment, one - colorless. 5 minutes after painting, one of the pigmented billets wiped for the manifestation of the pattern. To keep the wood after driving a pigment (24 hours or more, read on the package), the lining is covered with two layers of colorless oil (lazuries, wax). In the field of intensive use, you can also cover the lacquer.

How to paint the lining under the bleached oak

Often need to paint the tree in white colorBut so that there are bodies visible. They say more - create an effect of a bleached oak. There are several ways:

Which of the compositions to choose is difficult - it is necessary to try to paint the lining with several compositions and compare the result. The effect when using different means is slightly different, but even highly depends on the wood. Reviews are also very different - someone blew up with tintov, someone oil. The soils are rare for these purposes, but mainly due to the fact that they are not known for their properties.

Secrets of decorative staining of wood: equipment and tricks

The inhabitants of the cities want a maximum to preserve the natural color of wood. Those for whom wood in the house - the boning everyday life - to paint the lining indoors in some unusual color. Modern LKMs allow you to achieve different effects. For example, textured or brushed lining, but in two colors. This technique is often used.

Folded lining in two colors - an excellent choice for decorating walls

All cunning - in applying two layers of different colors. The first layer is applied by some dark color, the second is light or brighter. After playing the colors and order of their application, you can create your own option. Watch the video - how to get brash in two colors.

Coloring in two colors may not be like that. You can make removing a darker color, and the ray (front part) is only slightly toned or do everything up to "on the contrary." It turns out the striped wall of the wallpaper - the effect of the rush wall.

How to paint the lining inside the house: ideas

Techniques and ways of painting is great, but how? Simply. There are a lot interesting options. The last finds of designers are a wall of lining indoors with smooth walls. It looks creative and interesting. And most often such a wall is made in the brash technique.

Interesting effect gives a combination of units of different thickness - in the photo between wide boards inserted thin. And they are painted in different shades of the same color. The combination is interesting and fresh.

The lining is not necessarily a flat board with small grooves on one side, which is also called Eurovantia. There are different profiles, including waves and depressions. Of them you can collect interesting walls, whose relief emphasize painting.

You can collect interesting reliefs from the lining of a different profile. To looked more interesting - to emphasize reliefs or chop

As usual in the interior, much depends on the light. Several non-standard decorated lamps - long translucent bands, followed by lamps installed in the middle of the ceiling - and the interior is completely transformed. In such a design, you can arrange rooms for youth, creative, etc.

You can play not only with light, but with color: in the lighting zone paint the lining in more light color, emphasizing this way this zone.

If you have good skills in drawing, you can paint the lining. Just do not forget then the whole picture is covered with colorless butter or varnish - to preserve longer. This technique can be used when

The living room, the hallway is perfectly looking hard outlined panels from the lining. In the same way, you can make a wall in the dining area in the kitchen. Only the quality of it and the color must be perfect.

Honey shade lining repeats on the ceiling

Pulling on the impermanent can be processing for the interior in the style of "Rustic". Power rooms with a male character.

The style of "Rustic" will like men. In this case, the painting of the lining in the brash technique is the norm. And the color choose dark

As if in opposition - light walls. The lining is low, and the beams are painted in a dark color. Despite the traditional materials used by centuries, the view of such a room is modern and stylish.

An excellent combination is light walls with a bleached oak effect and dark massive beams. It is almost a win-win version

It uses lining and finishing bathrooms. Impregnation It is necessary to pay maximum attention, but if you do at the level, impregnation - with protection against moisture, then there should be no problems. And the interior, you see, very interesting - warm tones of wood in combination with a bright marble - an excellent course.

Used lining and at. It is only necessary to stuff it horizontally - so you can expand small space. And better on such a small area, light colors look, maybe with a dark edging.

Ceiling - lining painted with light veil

The clapboard is made to call the trim boards, the thickness of which does not exceed 2 cm. Apply such a material for both internal finishes and external. Modern market building materials offers two main varieties of products - it's lining from russian manufacturers and Eurovantia (or "Lining Extra"), that is, foreign counterparts. But, no matter what quality the lining, natural wood without processing, over time loses its original beauty. The article will talk about how to choose paint for lining.

How to choose a lining

• The differences between the trap Russian manufacturers and European are also external, and in quality characteristics. As a rule, boards made at the European factories correspond to European quality standards and are more resistant and durable, also almost all such products has standard dimensions, Clearly relevant declared geometry.
• By purchasing goods, it is necessary to pay attention to the principle of the connection. So, the eurvagra has a thorn of a larger than the boards produced in Russia, so when installing it looks more attractive. In addition, it is this type of connection that allows you to create cladding with a beautiful profile.

• The material received its name for a long time, while during the development of Siberian expanses. Then it was customary to sow railway cars with thin bugs, the same width connecting through the groove and spike. So it was necessary to call this kind of product "clap".
• Today is pretty a large number of Objects are separated by this material - loggia, balconies, attics, hallways, country houses, saunas and baths. The dies can be from different wood species. For example, the lining of fir or pine is made to use for the facing of the inner space of the house, where elevated humidity and sharp temperature fluctuations are not supposed (medium temperature mode from -5 and up to +30 degrees). But the larch clapboard, it is recommended to separate the external part of the structure, as it can withstand the temperature from -50 and up to +50 degrees, and is also not afraid of any atmospheric phenomena, including heavy rains or snowfalls. For premises C. high humidity (100%) or high temperatures (up to +120) the most the best option Products from alder or linden will be.

Main characteristics of clapboard

• Most often you can find on sale lining made from coniferous rocks Woods, such as pine, spruce, larch and cedar, as well as from deciduous trees - Aspen, Oak, Alder, Abachi or Lipa. For the production of high-quality product, the workpiece is carefully dried by achieving the level of humidity not higher than 15%. Next, the main process begins for which a special machine is required for the production of lining.
• All products are divided into 4 classes, which are denoted by Latin letters - "A", "B" and "C", as well as the prefix "Extra".

• For the manufacture of a product with marking "A" and "Extra", only even, not a bitch material, not having mechanical damage and other defects is selected. Products marked as "B" and "C" categories may contain a small percentage of knots. But only healthy wood takes on the production of any variety, with the lack of fungal diseases and wormochin. The front side of the selected material is plane and aligned, the processing of milling, grinding and polishing is necessarily carried out.

Types of lining

The service life of the unprocessed wooden lining is about 15-20 years. If it is protected from insects, moisture, ultraviolet radiation, then its operational characteristics increase significantly. Today you can meet several lining subspecies, which differs not only by the country of production, but also the size and profile:

• walking-quarter - A simple tacking board that does not have a puzzle compound, when installing, install one roll on another brass (on specially provided lateral protrusions), the thickness can vary from 14 mm and up to 5 cm, length 2-3 m, under the order up to 6 m, use for any types of finishes;

• show-lining - Used to finish vertical bases both inside and outside the room, equipped with ventilation recesses, the thickness varies from 12 mm and up to 3.5 cm, on the one hand there is a spike, and on the other hand, which makes it easy to install;
• "calm" - Such lining has many names, among which "simple", "collective farmer", "Russian", "peasant" or "classic", is produced with a standard castle puzzle compound, while the grooves are deep that when installing creates a sensation of a flat uniform plane Also there are recesses for ventilation and smoothed chamfer, the thickness of the board from 14 mm to 18 mm, the width varies from 6 cm and up to 16 cm;
• lining with chamfer - Boards have a groove-spike connection, but no ventilation recesses are provided, the chamfer is created at an angle of 45 degrees, the thickness of the product from 12 mm and up to 3.5 cm;
• double-sided lining - The profile is processed to perfect smoothness on both sides, and during installation you can choose which direction the product will be installed, the chamders are rounded, the ventilation grooves are missing, thickness 14-18 mm, width 6-16 cm;
• eurovanda - which is also called "Euro-concaten", it is characterized by perfect geometry, as a rule, processed from 4 sides, the lock is also in the form of a spike and groove, it is recommended for plating inner rooms, as the thickness is only 12.5 mm, width without a lock connection 8.8 cm, with a 9.6 cm lock, that is, it has a wider thorn (against the lining of Russian producers 4-6 cm), which allows you to compensate for the change in the profile under the influence of moisture or temperature and not allow the appearance of the gaps, when installing the comb is not to the end in the groove and the feeling of the surface of the strip is created, there are ventilation grooves on the back side;
• standard - a type of eurvagra, has direct chamfers and a puzzle compound, thickness from 1 cm and up to 1.8 cm;
• "Soft Line"- the type of Euro woman, has rounded chamdes, due to which the feeling of the nobility and prestige of the finishing arises, 1-1.8 cm thickness;

• "American" - in appearance resembles siding, type of Euroovali, on the cut has the appearance of an irregular rectangle, thickening on the groove (from 22 mm to 4.5 cm) and narrowing towards the ridge (14-16 mm), the feeling that boards is created Blinds are put, such a connection reliably protects the product from the penetration of moisture, which is why it is recommended to apply this species for exterior decoration, you should lay below up (narrow part at the top), the width of the product from 6 cm and up to 14 cm;
• block house- The front side is not flat, but in the form of a cylinder, that is, when finished, this product creates a feeling that a rounded log was used for construction, the product radius from 10 cm to 21 cm, the thickness is 1.8-5 cm and the width 9.5 -20 cm, it is used for both external trim and internal (but it looks somewhat rough);
• eurovand-Bar - is a profiled panel of wood, thicker than the usual eurogram (18-35 mm), mimics the walls erected from the bar possesses good thermal insulating and noise-absorbing characteristics, has a width of 12 cm and can reach 20 cm, the chamdes are made at an angle in 50 degrees, the lining is connected by means of a puzzle castle;
• "FINE" - It has a small rounding of the profile on the sides with a flat central part, otherwise such lining is called "oval", thickness from 12 mm and up to 2.5 cm, well suited for the interior decoration, has a more winble appearancethan block house;

• "taiga"- Decorative lining used in the interior decoration has a thickness of 14-18 mm, with a width of 6 cm to 9.5 cm;
• "Land House"- a kind of decorative lining for interior decorationThe profile has a kind of relief, which can have a negative effect of atmospheric precipitation, thickness 16 mm, width 9.6 cm (working 8.8 cm), the back side has special grooves;
• "wave"- Decorative lining, for interior decoration with a wavy profile, thickness varies from 14 mm and up to 18 mm, the width is standard at 11.5 cm.

Lining from natural wood has many advantages, among which durability, environmental friendliness, ease of installation, strength and reliability. But it is very important when cladding the surface with wooden planks, be sure to treat them with finishing coating.

For these purposes are used various materialsIt may be varnish or wax that retain the texture and color of the material, as well as simulators, drevilles, and paint. The main thing to do right choice The painting or protective agent and then it is possible to achieve exactly the appearance of the product that will delight with its magnificence for many years.

How to choose paint and varnish products for lining

Covering products are very much, it can be both staining compositions and just protective. There are solutions used for lining indoors and outside, since operating conditions have some differences. For example, wooden facing from the outside of the house is exposed to atmospheric precipitation, winds, low or high temperatures, ultraviolet radiation and other adverse factors. This means that the finishing coating should be sure to protect the surface from such detrimental phenomena.

• First of all, it is possible to cover the lining with antiseptics, hydrophobizats and antipirens, which are securely protected from moisture, UV radiation, as well as from microorganisms and fire. Such formulations can give an additional shade or not to have it (lesing means).
• It is important to make sure that these drugs can be applied under the subsequent color, otherwise the treatment of paintwork will be prohibited. Recently, the "Pinotex Extra" agent, used for external and internal works, is very popular, it has more than 100 shades and reliably protects the wood from adverse factors.

White paint for lining photo

• In cases where the wooden surface was darkened (it happens from long-term operation without finishing), it was manifested by Syane (arises on poorly dried boards) or traces of mold and fungi appeared, it is necessary to whiten the lining. The most popular compositions are "Sezheng Neo" (the manufacturer "Sezheng", a two-component drug, based on active oxygen, does not destroy the outer layer, reliably removes mold and fungi and brightens wood), and "Inimes" (manufacturer "Rogunda" Parts that are treated in turns based on active chlorine).
• You can also recommend the use of such a means as Bez is a nutty veil, which is capable of reflecting particles of light, but staining wood in the shades of brown. The drug prevents the development of fungal diseases, increases refractory properties and slows down the process of rotting, and also gives a noble appearance.

Lucky for lining

After the texture of the lining manifested itself the best way Or the surface is lined with new ds, you can move to the process of direct staining. For such purposes, as paints are used, so varnishes. Today manufacturers offer a fairly wide range of their products.

To protect and give lining decorative View optimal option It will be covered with her lacquer, impregnation or icing. Lucky can have a different composition:

• acrylic aqueous - designed to cover the plating indoors, there are both matte and glossy, and their toning is allowed into different colors;

• acrylo-polyurethane - resistant drugs that are reliably protected from the appearance of mold, are not afraid of atmospheric phenomena, and therefore the use in the external decoration is allowed;
• alkyd - Used inside buildings and outside. These are resistant compositions, reliably protect wood, but minus compositions are that they have a very dense structure, which does not let air;

• water-emulsion - only for internal surfaces, based on aqueous solution;
• polyurethane - reliably protect against yellowing, as well as steadyly carry the effect of aggressive media, can be used for external and interior decoration, it is recommended to use on surfaces that are subjected to intensive effects, as such varnishes are protected from wear and mechanical effects.

A tested and reliable composition on an alkyd basis is a yacht varnish, despite its high cost, it is a very durable and sustainable means. The main producers are considered "prestige", "Rogned" (Russia), "Marshall", "Poli-R" (Turkey) and "BELINKA" (Slovenia).

Paint for lining

In addition to varnishes, a very large selection is offered and staining compositions. Paints can be glossy and matte, as well as specially designed for wood - "breathable", such as paint ticcuril for lining. It is important to take into account that whatever beautiful paint was, and whatever the super-light texture does not promise the manufacturer, the natural wood texture is most often lost under the stained layer.

Paints for wooden lining are several types:

• alkyd enamel - For example, "PF-115", a universal composition that falls on any base, the average price of such paint for the lining is about 70 rubles / kg. Forms a glossy dense coating on the surface, does not resolve in the process of operation;

• acrylic water-emulsion Paint for lining inside the house - when staining gives a matte, translucent effect, and when applied by a thin layer, the structure of wood does not close;
• oil paint - compositions of deep penetration, increase the resistance of the lining to factors ambientThat is why it is recommended to use for an external finish. The main disadvantage is that with long-term operation, the color intensity is reduced, also when applying will have to wait a few days while the composition is completely dry, with strong winds and it is desirable to strengthen the surface-processed protective material (film). Oil paint for lining has many colors and shades.

Paint for lining photo

What paint paint the lining depends on personal preferences. It can also be recommended to cover the products from the tree with varnish in cases of need to maintain the texture and structure of the wood. The varnish reliably protects the outer layer of lining from darkening and from destruction under the action of atmospheric phenomena. If she has already darkened, it is best to buy opaque paint for lining.

Of course, you can always remove the upper dark layer of wood with the help of grinding and cover with varnish toned in a dark color. Tinting in this case will be mandatory, as it is simply impossible to completely restore the former type of lining.

During the repair, people give their preference to the lining along with putty, wallpaper and a cafe. But, in any case, if this material is used in the bedroom, it is not final. Paint with acrylic base, for example, paint for lining ticcuril or similar coating is necessary. Next, we will tell about how to choose the right paintwork materials for the wooden surface and correctly use them.

Paintwork and their use

• There is no one faithful solution among the choice of paint for the European paint, as there are various properties that paint coatings are possessed. It is definitely impossible to say which material is good, and what bad and price is also not an indicator. In this case, it should be declared which properties when painting are necessary, and two types of coatings are given to the choice - vapor-permeable and water repellent;
• An instruction in which the properties of the material and its application are specified to each bank. For interior trim, acrylic paint is suitable or water-based varnish. When using these materials, the wooden coating will pass the air. For the exterior decoration, but the bathroom and kitchen is best suitable for oil paint, or nitro paint. This coating behaves well in conditions of high humidity;

• When choosing a color of paint for the lining, it should be relying only on itself and the vision of your own interior. On the Internet you can find recommendations for choosing the color of the room. Fortunately, specialized shops and building markets provide the choice of shades of the entire RAL color table.

Recommendation. It is the opinion that the wooden surfaces need to be primed by the Olife before their painting. But this is a delusion. Primer Olife is made only before coating wood paint on an oil base.

Before staining, Niptocrass needs primer GF, and acrylic fits well after treatment with an antiseptic tree. Best result Water-based paint staining can be achieved if you make this action in two or three layers.

Staining wooden lining

• First of all, before using paint it needs to be brought to a uniform consistency, in order to activate all the dyes. Before proceeding with the work, the paint for the Euro woman needs to be blasing, or it should be mixed with the help of a blade or needles;
• The coloring products on a water basis are applied to the surface, which is not necessary to handle anything. The photo shows that the water-emulsion is applied immediately to the tree. It is recommended, however, to apply two or even three layers of coating. The main thing is not to overdo it so that the wooden structure of the lining remains clearly visible;
• It is not necessary to use a roller of wool or foam rubber when painting lining water-emulsion paintsince these devices are not effective in hard to reach places. For such a type of paints, the usual brush is best. Water-based paint in the finished dried form is easily humid cleaning and is not susceptible to negative impacts from water;

• For painting of wooden surfaces, in addition to paint, there is a kerching. When painting the lining with a zero, the product is recommended to be applied simultaneously by 1-2m 2, then leave for drying for 10 minutes. During the drying, the tree absorbs the desired amount of oil, and the remaining wax wipes. You can read about the use of this composition in wet premises in more detail in the article than to cover the lining inside the bath.

• To remove the surplus oven, you need a fabric without a pile. The waffle towel has an excellent dense structure without villi and easily cope with such a task. Please note that the wax should be wiping immediately after 10-15 minutes after applying, as it quickly solidifies. If you do not hurry, then the material simply will lose the desired shade;
• The procedure for coating a wooden lining with a zerofili should be repeated the next day. Just do it you need not color material, but transparent. Everything is done in the same way as in the first case - we can paint, wait for 10 minutes, wipe the waffle towel.

Note! A fully finished painted surface can be used after 24 hours. Maslovos is an order of magnitude higher than the classic paints and varnishes. However, the oil skid looks much more spectacular and more beautiful.

• Color wooden lining can not only with the above-mentioned products. It will not bad for the surface and varnish on the surface. You can block the wall paneling with a veil, and then transparent varnish. Or, the second option, you can use only varnish. Then suitable as a colorless varnish and color (in more detail the process of staining of the wallboard of wood can be viewed in the video clip);
• Before opening a wooden surface with a verse, you need to try it on a test piece of the surface. To do this, paint a small surface and wait for about an hour until complete drying. After the specified time expires, you can define the final color of the product. Varnish after the veil is applied to the tree in a day. During this time, moisture from the product will leave, and it will be ready for further coverage;
• When covering lining with a transparent aqualaka, a tree variety should be taken into account to which it is applied. The lining is not from the needle with time will darken and acquire the effect of patina. The coniferous product will maintain the initial look for many years.

Output

If you decide to repair wooden materials, it will require mandatory additional processing. It means that the application of paints and varnishes is a prerequisite for the use of wood. Water-based Watch Paint - durable Materialwhich will correctly serve for long years.

However, the paint can be easily updated, applying over a new layer. There should be no additional actions before painting, if there are no visible defects and damage. It is recommended only to clean the surface from the dust layer and fat.

Gradually, various synthetic finishing materials, such as wallpaper or plastic, go to the background. Natural, environmentally friendly materials are returned. Wooden lining is just one of them. Since the tree over time fades and exposed various types Impact, the owners of homes and apartments often have questions about how to paint the lining inside the house. The lining is suitable for both external and interior decoration. But, as it is properly used for indoor rooms.

Many believe that since inside the house there is neither rain, nor snow, no wind, then there is no need to paint the lining indoors.

But this is a delusion. So why need to paint the lining:

1. It should be remembered that the lining is made of wood. And the tree lights up easier. Naturally, no protective material will ensure absolute protection against fire. But there are compounds that significantly increase fire resistance.
2. Over time, the tree begins to rot. To avoid this, it must be covered with a special composition - an antiseptic. It is colorless, so the original wood texture will exceed perfectly.
3. The paintwork is used to protect against mechanical damage, taking over all blows and scratches, keeping the beauty of the walls.
4. The paint coating protects the wood from the effects of ultraviolet, thereby protecting it from the darkening.
5. Just for beauty. If you do not want to change the natural colors, the application of a special varnish will make the wall cover more bright and brilliant. Or vice versa, many paints completely hide the original colors, while maintaining the wood structure.

Selection of necessary components

What is better to paint the lining inside the house?

All paints and varnishes are divided into two main groups: protective and decorative. Consider each of them.

Protective compounds

• FROMrestrand absorbed into the tree and increase its resistance to fire. Recommended for use in the processing of inland residential premises. Thanks to treatment, the tree will not light up much longer, which will allow either faster to eliminate the hearth ignition, or give the time to residents to leave the room.

• Used for impregnating wood. The lining impregnated with oil is insensitive to moisture and fungus, and also acquires a matte tint and a clearly pronounced structure.

• Olife Earlier was actively used when working with the clapboard, but today it rapidly gives the position. The refusal of it in the impregnation of the walls is due to the fact that it rather quickly darkens and begins to stick.

• Bleach. Used to remove various defects from the surface of the lining. For example: stripes, dark spots, bluish shades. Depending on the purpose and method of use, these substances are several species. Most of them are applied to the material at the site of the defect, are left for a while, and then washed off with water.

• Primer. Provides protection of wood from mechanical effects and creates a reliable adhesion of the decorative layer with the treated surface.

• Wax formulations. Traditional and very effective protective agent. The wax creates a dense layer that does not transmit moisture and resistant to mechanical effects on the surface of the wood. Its very difficult to apply evenly. Usually a primer is applied before wax, which facilitates this process.

This division is very conditional. As mentioned, many of these funds are applied separately, without decorative coverage. But their main function is the protection of the tree, and the impression of the shade and severity of the structure is a secondary moment.

Decorative means

Painting wooden lining with decorative coating means that the natural color of wood will be lost. This is usually done after a certain time when an unpainted tree darkens, or other creative ideas appear at the owners.

How to paint the lining inside the house? There are quite a few different decorative coatingscorresponding to tastes of even the most demanding aesthetes. These include:

• - It is a perennial recognized leader in wood painting materials. It deeply absorbs inside, so that the painted surface gets reliable protection. She does not fade for a long time. The main minus is that the paint dries down for a long time and has a sharp specific smell. Therefore, produce repair work Recommended in warm weather so that the room can be used.

• - Better than previous on all indicator. Acrylic paint He dries quickly, does not have a sharp smell, which makes it possible to produce work at any time convenient for you. Such paint for the lining is not fading for a long time, while maintaining the original shine, it has good resistance to moisture. The only minus is high price.

• Acrylic Aqualaki. - by general opinions are best tool For handling clapboard. They are an environmentally friendly product. Varnish forms a reliable decorative coating that is distinguished by durability, resistance to moisture and mechanical effects.

• Alkyd varnishes - the color of the lining is the main function of this type of material. Its advantages are resistance to moisture and temperature drops. Essential disadvantages - long-term drying, easy flammability, high price.

• Decorative glaze - Thanks to transparency, it highlights the wood texture. To give it the desired color you can add different colors.

• Opaque enamel - Creates a dense layer on the woodcase, completely hiding all the defects and protects the product from mechanical damage, well suited for country construction.

Choosing how to paint the lining, you need to keep in mind these moments:

1. Oil paint dries quickly, but over time brightens. Therefore, choosing which paint to paint, dark or brighter, it is better to choose the first option.
2. Painting lining inside the house is a painstaking lesson. From decorative coatings it is best to use water-free paint. This is a 100% eco-friendly product. You can work with it at any time of the year.
3. How to paint the lining inside the house at the cottage? It is best to choose an alkyd varnish. It is durable, resistant to moisture, mold and fungus.
4. Eurovantia can be painted with transparent polyurethane varnish. He emphasizes the texture and "naturalness" of wood.
5. One more good paint For lining - acrylic. She does not change his color for a long time.
6. How to paint the ceiling of the clapboard? Do not use water-based paint. Stay better on alkyd varnish or choose oil paint. These funds do not spread and dry quickly. You can easily paint the ceiling.

On the video: the better the tree is painted.

Conducting work

Revising Painting Painting Options and choosing a suitable method, as well as all necessary materials, you can get to work. Here is a list of what you need:

• gloves;
• ladder;
• veser;
• sandpaper;
• pussy of different widths, for painting walls, ceilings, floors and gaps;
• comfortable clothes and shoes that do not mind;
• a solution for removing the paint coating, if the surface was painted;
• metal brush;
• tray;
• the paints you have chosen.

How to paint the lining inside the house? Actually, the process of applying paintwork coating itself is conditionally divided into two stages: preparation and painting itself. Consider the whole process on the example of how the painting of the wallboard is in white.

Preparation for painting

How is the lining on painting preparing? First of all, you need to clean it from pollution. This is done with the help of ordinary water from sodom divorced in it. If the surface has already been painted, then an old layer of paint needs to be removed using a painting tool. Repair faulty panels (if available).

After that, go to the next step - grinding.

It is best to use pums or sandpaper. The entire area being processed from the inside is expedient to split into small sectors and sequentially grind them one by one. So you do not miss some kind of untreated segment. We need to grind evenly.

After grinding, proceed to priming the coloring material. From the surface garbage remaining after grinding. Then, with the help of the brush, the primer layer is applied, especially carefully processing the seams.

Painting

So, we came close to the answer to the question how to paint the lining in white.

After performing all the preparatory procedures, you can proceed directly to painting. How to paint the lining?

You will need paint for lining inside the house and at least two brushes: large - for basic work, and narrow - for gaps. The material is superimposed in several thin layers. The paint is applied first to the upper edge, in order not to be swollen with herds already painted plot. After drying the first layer, the second is applied. It follows the third layer, it is usually the last. The last layer should be the thinnest. It is applied with light uniform movements. Then the paint leaves to dry - the work is made.

How to cover the wooden surface (2 video)

The surface decorated with natural wood can also need painting. Why do you need and how is it done, we will try to figure out. So, the topic of our today's article is how to paint the lining.

Why do you need it?

In fact, why do you need to paint wood with its beautiful textured surface?

Scenario Two:

1. The lining is painted with protective varnish (often mounted) precisely in order to preserve its appearance as long as possible.
   Varnish suspends wood fermentation process when contact with atmospheric oxygen. As a result, the outer layer remains light not a year or two, and decades.
2. If the wood has already darkened, the paint will make a rather unattractive surface. Let not so natural, but at least looking decently.

Tip: Darks only a thin outer layer of wood. In most cases, it is enough to treat the surface of the darkened lining with grinding and paint the mounted in a dark color (to hide the flamns of grinding) varnish.

Selection of material

Let's start with one of the stumbling blocks in disputes about painting a tree: Does the primer need?

The answer can be given quite unambiguous: it is not necessary. On the porous tree surface, any paint or varnish is perfectly held without soil. The primer will only reduce the consumption of the paint material when applying the first layer.

What about the choice of paintwork actually?

Varnish

Thoughtful reading the thematic forums will bring us a whole pacor of recommendations based on personal experience.

• Olife. Traditional coverage will be inexpensive and effective way Wood protection. Olifies the lining is needed at least twice, with a complete drying of each layer.
  Alas - during drying you have to keep windows open. Olife smells, and quite strongly.

• Yacht Lac. - Not the cheapest, but very durable option.
• Colorless water-soluble varnishes on an acrylate basis Not only will protect the tree from the darkening, but will not irritate you with sharp odors in the drying process.
  A typical representative is a matte lacquer panel-yassenia from Ticcurila.
• Polyurethane lacquer Particularly durable and makes it possible to reliably protect the surface of the lining from pollution and wear there, where it is often touched. The main drawback is the cost.

Paints

It all depends on your goals.

• Alkyd enamel (PF-115 and analogs) will give a dense glossy coating.
• Water-emulsion paints on acrylic basis Move the surface matte. At the same time, two thin layers of liquid paint will save wood texture: irregularities, bitch and layers in the boards will be clear enough.

Color

1. Clean the surface of the clapboard. Dust and dirt can be washed away with any detergent. A good idea will clarify and degreased wood.

Tip: Alkaline detergents Can perform all listed functions immediately.

Armed with a sponge and whiteness of whiteness, you will quickly get a clean degreased surface, the chlorom contained in the liquid contained in the liquid.

• Grind the surface. The usual pumice is suitable; It is even better to arm a grinder with a pair of eata species - large and small.
• Antiseptic primer will become the next step. It is applied with a roller or spray gun; In the first case, in deepening and irregularities will have to be taken for the brush.
• Transparent varnishes and paints are applied equally - at least two subtle layers. At the same time, the latter layer is applied along the fibers of wood so that the stripes are not visible.
  It is better to paint with a brush, as the roller will not punish the grooves and cracks between the boards.

Best tool - ordinary brush

Conclusion

Finally, one more advice. Optimally paint and lacquer the lining in the absence of direct sunlight, at moderate temperature and constant humidity. Then the coating will be the most durable and durable. Successes in repair!