What are acrylic paints. As they use. Benefits.

There are already half a century, today are used by artists extremely wide. The main advantage of acrylic paints over all the others is the simplicity of their use, the speed of drying and, of course, their versatility. Modern developments of acrylic emulsions, including extremely small and light-resistant particles, make it possible to get paints more and higher quality. These paints dissolve in water, and drying out, absolutely not dissolved. Plus, acrylic paints are very resistant to various kinds of physical and chemical influences. Thus, all acrylic paints released by Ferrario factory (main producer of such paints), as a binder component contain an aqueous suspension of synthetic resins to which synthetic or natural clean pigments, stabilizers and coalescent substances are added. After the processing of all these starting materials, elastic and bright paint color are obtained, superbly adhesive with any low-fat surface, be it canvas, paper, wood, clay, cloth or ceramics. Acrylic paints It can be applied with a brush and a spatula, after dilution, as well as an airbrush. For each paint, conscientious manufacturers indicate the degree of coating ability, light-resistance and which pigment was used. Due to the rapid drying of acrylic paints, the tube should be closed immediately after use, a large arsenal of special diluents allows the artist to use the most different technique in the work.

The advantages of acrylic paints.

While acrylic paints have targeted the benefits of watercolor and oily, as well as many of their own advantages, they are universal and convenient during use. Despite the fact that painting is preferred by the artist, acrylic paints should try anyway. The role of their bases protrudes plastic synthetic resin, and therefore - allow to achieve the most sophisticated lusters, and dense texture.

Acrylic paints quick-drying, differ in good covering ability and magnificent brightness of color, do not fade under the rays of the sun, do not fuss over time. When they dry, turn into an elastic resistant coating. Acrylic paints are written on paper, cardboard, wood, as well as metal, fabric, ceramics and glass, if these surfaces are properly cleaned of dust and fat.

How diluted.

In acrylic paints, the particles of their pigment their pigment are related to the emulsion (liquid plastic mass) - it becomes transparent after drying. Acrylic soluble in water and therefore it uses the quality of the diluent and washing for cleaning the brushes. After drying, acrylic becomes insoluble, which cannot be said about other colors. This feature is extremely important, since after completion, work is no longer affected by water, plus the paint can be applied to the layers already. Of the disadvantages of Acrylic, it is worth noting the fact that it is able to spoil the brushes, which have to rinse with warm soapy in the most thorough way. In addition to water, acrylic paints can be diluted with other solvents. The overwhelming majority of acrylic manufacturers produce their own funds that are able to slightly change the properties of acrylic. First of all, it is worth noting glossy and matte diluents. Thus, the glossy diluent significantly improves the crumbling properties of the paint and when drying it gives the surface of the shine. Matte diluent has a similar consistency, but, hung, gives a matte shine.

Another remarkable property of this kind of paints is drying time. As soon as water contains water in acrylic paint, it dries. As a rule, half an hour is enough to impose the following on the paint layer. This feature is primarily important when "fast" work.

In addition to the already mentioned water resistance and dryness speed, acrylic paints differ in very good adhesion. As a result, it allows you to successfully use them in all kinds of outer paintings, since the paints are not affected by natural factors and are quite well falling on the vast majority of working surfaces. Acrylic is perfect for creating collages, because it can be used as glue for paper, fabric. Also, textured acrylic paints (gels) and modeling agents are distinguished by increased adhesive properties, and they can be used to create surfaces with relief.

A variety of technician.

If acrylic paints are strongly diluted with water, then they become very similar to the gouache or watercolor. If you put the paint directly on the tube or to dilute it directly, it appears the opportunity to work in the so-called pasty technique - something like traditional painting with oil.

Acrylics differ from each other primarily by their consistency: from more liquid to thick. The most thick paints are used in pastoral technology, where a special role is paid to the invoice. Liquid consistency is perfectly suitable for filling large areas of the surface.

Liquid paints.

To date, there is a huge selection of transparent and opaque shades of liquid acrylic. The consistency of the paints varies from the oily (more similar to the paste), to the most liquid. Since these paints do not have such a long history of existence, such as oil (there are 5 centuries), manufacturers did not produce any uniform standards on them. The most liquid acrylic resembles ink. Such colored inks include a shellac as a binder component (alcoholoisseable resin) and differ in water resistance after drying. As a rule, the ink is not waterproof, but some colors (for example, black and white) more rack.

Watercolor in the role of the binder component is a gumiarabic. Just as ink, it is mainly not distinguished by resistance to color and blurred by water after drying. In liquid acrylic paints, the binder is represented by a film from acrylic - transparent liquid plastic. Dried, acrylic becomes waterproof, more plastic and transparent than ink. It is made of pigments, which are mostly compared to dyes more light-resistant.

Light resistance of paints.

Despite the entire attractiveness of the color and brightness of ink and watercolor, they should never be used to create works that you would like to save for a long time, since their paints will hang out, unfortunately.

Drawing acrylic.

Liquid acrylic paints are often used in rapidographs to perform accurate pattern. It is also suitable for calligraphic work - the pen is created the most exquisite lines. Due to the fact that the liquid acrylic after drying becomes waterproof, the pen will be necessary to rinse with water. Feather handles with a piston immediately after work you need to thoroughly rinse with water so that the paint inside does not dry. You can work with a liquid acrylic and a soft brush in classic watercolor technique. In addition, it is worth trying to mix the paints different ways To obtain original effects. So you can try the straw to "blow out" the lines across the entire area of \u200b\u200bthe sized surface, and in addition to use the household hairdryer to get even more complex image. Basically, manufacturers of acrylic paints produce at least one type of acrylic paints, differing from each other by the consistency and set of colors. Acrylic paint is applied as a thick layer and lescing. The pastoral technique will require paint of a thicker consistency, which will allow to preserve the texture of the brush's brush. More diluted, more liquid paint is more suitable for lusters. By adding appropriate means for thickening and dilution, you can get more types of acrylic paints.

Decorative and applied application acrylic.

Acrylic liquid consistency can be used in a variety of different craft works. They are perfectly suitable for decorating wood, leather, ceramics and glass, and in the latter case it is possible to achieve the effect of stained glass.

In relation to acrylic paints, the situation is typical when an excellent quality palette comes into disrepair only because it is almost impossible to clean the paint. The thing is that the paints dry pretty quickly, and high adhesive characteristics exclude the possibility of removing them after drying from some surfaces. The dried acrylic does not dissolve - it cannot be removed by water or any other solvent. That is why it is not worth using porous materials on which the paint is well held. So, wood will definitely be an unsuccessful choice, even if it is lacked. Optimal option For acrylic paints there will be smooth surfaces that can be washed and form scratches. For example, it can be glass, plastic or melamine.

Most often, the palette for acrylic paints is made of plastic. They are designed in such a way as to ensure maximum amenities when used (there are rounded or rectangular shape). Also for acrylic paints you can use a tear-off paper palette. We are talking about the palettes of a variety of sizes, each of which has a rapid-based base from durable cardboard and before foaming sheets of parchment glued on both sides together. Such tear-off palettes do not need to be cleaned, as the paints are mixed on the top sheet, and at the end of the work it is removed and thrown out. Among other things, there are palettes designed to ensure that the paints remained over the entire week.

Often artists-professionals who use acrylic paints in their work give preference to the palettes made on request. Everything necessary materials It is quite cheap and it is easy to get it, so it is not difficult to make a palette of any shape and size. In order to make your own palette, use materials such as forming, melamine or other similar layered materials that are sold in the shops "DIY" and in warehouses of sawn timber. Excellent material for kneading acrylic paints is glass, but since this material is much heavier than plastic, in order to safety the edges of the glass palette, it is recommended to shock the adhesive tape. You can also use metal, provided that it is enamelled or painted in factory conditions, otherwise the metal will inevitably begin to rust. It is not recommended from the metals, because due to the large reflection coefficient, it is not very well kneaded.

In order to remove dried paint from the palette, it should be put for a short time in hot water. As a result, water penetrates between the paint and thus peers hardened paint. Paint, which still remained on the surface removed with the help of a masticine and wet rag. It is necessary to do this in such a way that in no case scratch the surface of the palette. If scratches remain on the palette, it will strengthen the paint stickiness and the subsequent cleaning will be difficult. Given the high cost of high-quality artistic materials, it will be useful to spend half an hour to clean the brushes and the palette, closing the caps.

In the process of choosing paint for execution construction work, it is extremely popular with products on acrylic basis. After all, this type of paints is characterized by the highest resistance and brightness of color. We will talk about the features of the application and technology of staining with acrylic paints further.

Acrylic paints: origin and manufacturing technology

Acrylic is present in the composition of an acrylic basis - this is a polymeric substance, for the manufacture of which acrylic acid is cleavage. For these purposes, water or technical solvent in the form of ethanol, chloroform and ether are used. This substance is distinguished by the absence of color and the presence of a very sharp smell. Acrylic is synthetic material with a transparent texture. In addition, it is characterized by good mechanical characteristics, resistant to thermal effects.

Among the advantages of acrylic substances, high speeds of strength and ease are distinguished. Acrylic is stable before the exposure to ultraviolet radiation.

In order to make acrylic paint, the presence of the acrylic itself is required, in addition, the paint contains small dispersion parts of the plastic, the dispersion is characterized by a tendency to dissolve with water.

After the paint is driving, the formation of a film that provides protection for the stainable surface and coloring pigment from external influences.

As part of any of the paints on the basis of acrylic is present:

• substance binding direction;
• fillers;
• paint pigments;
• solvents;
• additives.

With the help of the first component, all ingredients of paint are connected. In addition, thus improving the degree of adhesion paint with a painted surface. As a binder, a material in the form of a polymer dispersion is used, for the manufacture of which acrylic resins are used. It is from this component that depends the strength, duration of operation, resistance before paint abrasion. The quality of acrylic paint directly depends on the type of acrylic resin used for its manufacture. With the help of a binder, a structure is provided on which the coloring pigment and other additives are located.

The composition is used as a filler, with which the paint is capable of covering the surface that it is painted. The filler is called larger parts of acrylic enclosures that increase the viscosity of the paint, its adhesion with the surface, protective characteristics and matting.

With the help of pigment, the paint reaches the desired color or shade. As a given substance, a powdered mass of a fine-dispersion type is used, which is not capable of dissolving in the binder, and is in the paint as a certain color. Selects such types of pigments:

• organic origin;
• inorganic origin;
• piece origin;
• natural pigments.

Using the solvent, the level of paint viscosity is reduced. Additives perform the function of auxiliary components that change its characteristics,

The technology of manufacturing paints on an acrylic basis includes such processes:

• installation in the capacity of acrylic composition and coloring pigment;
• the process of mixing of all components into a homogeneous mass, test quality check;
• packing paints in separate containers and preparation for sale.

Acrylic paint: photos and advantages

1. Environmental safety.

This advantage is achieved by applying in the process of making paint harmless to human health substances that do not affect its health.

2. Comfort and simplicity of work.

Due to the fact that the paints on an acrylic basis do not have smell, simplicity and convenience of working with them improve.

3. Fire safety.

Acrylic paints are not prone to fire, as they do not contain easily flammable substances in their composition.

4. Unlimited color palette.

A wide variety of colors and shades of acrylic paint allows it to be used not only for staining of various types of structures, but also to create paintings.

5. The speed of drying.

Acrylic paint drying time is 1-3 hours, depending on the thickness of the layer, which was applied to the surface.

6. Quality of elasticity, strength, ease of care and abrasion resistance - these advantages make acrylic paints quite popular in the construction industry.

7. In addition, the surface of the painted acrylic paint does not accumulate dirt, and the film formed after drying the paint, on one side passes the air, and on the other, is stable before moisture.

8. The duration of the coating operation.

Some manufacturers claim that acrylic paints are able to serve their owners for more than ten years, without losing their attractiveness.

9. Wide scope of application.

This advantage is due primarily to the resistance of paints to ultraviolet radiation, moisture and mechanical effects. Paints are allowed to use in rooms in which there is high humidity And on the street, under the right sunny rays.

10. Universality and versatility.

These characteristics allow you to use acrylic paints in combinations with other building materials, when finishing the premises both inside and outside. Acrylic paints are applied by almost any types of surfaces, except for some plastic species.

Scope of application and technology for using acrylic paints

The use of acrylic paints is associated with both the construction industry and painting. In addition, the acrylic paints apply drawings on the surface of the car, they are even used to draw on the nails.

Before applying acrylic paint to the surface should be performed such actions:

• carry out surface cleaning from dirt, dust and fat;
• if the material is characterized by high moisture absorbity, then before painting, it is recommended to be processed by primer;
• before using paint, carefully check its consistency, if necessary, dilute it with water or solvent;
• for application of acrylic paint, use a roller, brush or paint;
• the minimum air temperature for working with paint is ten degrees of heat;
• for cleansing brushes, paint containers and other accessories, use conventional water.

If acrylic paint was spent not all, it should be stored in a bank with tight closed lid.Since air entering its properties and makes unsuitable to further use.

The main varieties of paints on an acrylic basis

In the ratio of use, acrylic-based paints are:

• outdoor;
• internal;
• automotive;
• used in painting.

Paint acrylic facade contains in its composition substance and additives that improve its stability before ultraviolet radiation, moisture and abrasion. This type of paint is suitable for staining of various types of facades, fences, wickets and other surfaces located outside the room.

Internal acrylic paints are characterized by less resistance to external stimuli. They are well idle and differ in long operation. Distinguish separate species paints designed for staining of walls, ceiling. In addition, there are universal compositions that are suitable for working both inside and outside the room.

Automotive acrylic paints are applied on the body, with their help the usual car turns into a real work of art. With the help of artistic acrylic paints draw pictures, in addition, their special variety is designed for drawing on the nails and on the fabric.

In a ratio with additional functions, acrylic paints are:

• light-resistant;
• moisture-resistant;
• resistant to mechanical effects;
• washing.

In the ratio with glitter, acrylic paints are:

• on a glossy basis;
• on a matte basis;
• silky matte;
• semi-man.

Depending on the type of surface on which the paint is applied, allocate:

• acrylic paints for wood;
• acrylic paint for metal;
• acrylic paint for walls and ceilings;
• universal formulations.

Than dissolve acrylic paint

The first and easiest option for dilution of acrylic paint - water. Since it is present in the composition of the colors on an acrylic basis. However, it is necessary to take into account the fact that after drying, a protective film is formed, which is waterproof, therefore, clean all the tools, after work, it is necessary as quickly as possible until the paint dried.

Another option that will help dilute colors on an acrylic basis is a diluent, recommended by the manufacturers of paints. With it, it is changed by changing the characteristics of the paint, for example, the stained surface acquires a glossy or matte shine.

• the ratio of paint and water is one to one leads to the acquisition of the perfect mass, which is easy to go to the surface and is the basic basis for painting;

• coloring with paint in which two parts of the water added to achieve the subtlest layer, evenly impregnating the surface;
• the amount of water that is diluted with acrylic paint depends on the type and thickness of the layer, which must be obtained, the thinner of the paint layer is needed when staining, the more water should be added to the paint.

For breeding dried acrylic paint, it should be carefully chopped into a powder consistency. Next, the container in which it is poured by hot boiled water. After cooling the water, it merges, and the procedure is repeated again. Next, the excess water merge, and the paint is mixed. With this paint, it is not recommended to paint the responsible parts of the structures, as part of its properties is still losing. However, for painting the old commercially, it is the perfect option.

How to paint acrylic paint: technology work with material

The procedure for painting acrylic paints is quite simple, if you observe all technological moments and subtleties. We offer to familiarize yourself with the instruction on painting the ceiling acrylic paint:

1. First preparation of the surface to staining. There should be no dirt, dust and fat on the ceiling. In addition, the base should be perfectly smooth. If the staining was not previously conducted, then before applying the paint, it is recommended to treat the ceiling with a primer, which not only protects it from mold and fungus, but will significantly reduce paint expenses in the process of applying it.

2. If there is an old paint on the ceiling, you need to remove it with a spatula. Please note that the presence of small parts of paint on the ceiling in the process of staining is unacceptable.

3. If there are cracks or chipsets on the ceiling, they must be sealing with putty. After drying, the putty is made by its grout, then the primer and only after that staining.

4. Before applying, paint should take care of the preparation of tools in the form of a roller, tassels, paint tank, stairs and paint itself.

5. Start work with corner sites, working on them with a brush. First, the ceiling is painted around the perimeter. Next, using the roller, color the rest of the ceiling.

6. The direction in the application of the first layer does not matter. But the finish color should be carried out in such a way that the paint is applied towards the window. Thus, the surface will seem perfectly even smooth.

Since the time of drying acrylic paint is quite small, for staining the ceiling is enough one day. In addition, acrylic paint has no smell, so it is very popular when conducting interior finishing works.

There are two ways with which paints are made to the surface:

• pre-diluted with water or special mixtures;
• in a pasty form, in this case it will take the presence of a special thickener for paint.

Please note that the paint should be diluted in a separate container, in no way in the bank, since the paint, after evaporation of moisture, becomes unsuitable for use.

In order to paint the facade with acrylic paint, follow a number of actions:

1. Prepare the surface.

There should be no dirt on the facade, settling plaster, the surface should look durable. In addition, it should be verified in the absence of fungus on the surface of the walls. If there are cracks and other defects, you should get rid of them.

2. Applying primer.

The next stage involves applying the surface of the facade of the soil. After that, the grip between the painted surface and paint improves, and the level of paint consumption is reduced.

3. Procedure of staining.

Collecting paint is performed by manually using roller and brushes, as well as mechanically - with the help of a collapse. The minimum number of acrylic paint layers is two. Note that the application of the second layer should occur only after the final drying of the first.

Acrylic video paint:

Acrylic paints appeared only fifty years ago, but during this short period of time they managed to conquer the leading position among paints and varnishes. Now many of them choose for repair work. Acrylic paints paint the ceiling, walls, facades and more. Thanks to large quantity Advantages they have tremendous popularity among consumers.

The composition of acrylic paint is very simple - pigment, water and acrylic resin, acting as a binder component. Acrylic paint has a lot of indisputable advantages. This is an environmentally friendly material that is ideal for use in repair work Offices, children's rooms, apartments, facade.

These paints will not evaporate harmful toxic elements during operation. When painting acrylic compositions there is no smell. Acrylic paint does not ignite. This makes it absolutely safe for use not only in residential premises, but also in public places.

Acrylic paints have a huge number of colors and shades - now there are more than fifteen thousand colors. Such a wide choice provides a unique opportunity to designers to implement the brightest and bold ideas and projects. It should be remembered that more expensive compositions are better to choose to overlapping another type of paint. So, for comparison, the expensive material will block another color when applying two layers, while cheap only through three layers.

Acrylic paints are very easy to use. After applying, they quickly dry out, and only four hours can be applied the second layer. This is an excellent choice if you need to make repair very quickly. And the tools can be cleaned with conventional water water immediately after work.

Paints have a long service life. It depends on the choice of the manufacturer, constituting on average ten or twelve years. After drying, the surface can be washed with conventional cleaning agents, since acrylic paints are sufficiently stable.

Acrylic paint is highly resistant to various agents. From temperature drops, the material does not give cracks, that is, it is heat-resistant. Water and increased humidity do not disturb the structure of the painted surface. Straight sunlights do not change the color saturation of paint.

The surface painted with acrylic paint has considerable strength, elasticity and adhesive ability. The coating on which acrylic paint is applied, does not conduct electricity And does not absorb dirt. That is, it does not electrify and is dirt-resistant. Acrylic compositions are very slow. The applied acrylic coating layer forms a porous surface that is capable of passing air. But with all this, it does not let water.

Such a number of advantages that acrylic paints are endowed with them makes them very and very popular. In addition, such an abundance of advantages lies extremely few insignificant flaws. And for persuasiveness, it is possible to bring statistics - in Europe, consumption and production of acrylic paint amounted to seventy percent of the total choice of paints.

Application of acrylic paint

Thanks to all the advantages acrylic compositions Can be used for different types of work. Depending on the choice of the surface, the surface is chosen different types acrylic paints.

There is acrylic paint, specially intended for staining of facades of bricks, concrete, plaster, wood and previously covered with paint facades. But for paint coverage, it is necessary to carefully clean the surface from the blots, dust, dirt. And the obligatory requirement is to apply primer.

For painting walls and ceilings inside the residential premises, where the normal climate and no temperature drop and humidity are used. It can be applied to concrete and brick wallHowever, it does not matter whether it was twisted in advance or not. You can also apply to the surface of plasterboard and embossed decorative wallpapers.

To work in rooms, which are characterized by sharp changes in temperature and humidity, or painting walls or ceilings, which often wound up, special types of acrylic paints are used.

If you plan to apply acrylic paint on a metal surface, then for this purpose you need to use a special type of paints designed for metal. If there is a rust on the metal, then the paint is applied directly to it.

Although the acrylic paint is considered universal, but still for convenience, quality and durability it is better to use specially intended types of paints for different surfaces and work.

Now, knowing all the features of acrylic paints, you can do right choice When repairing your home, apartments, cottages, office, schools, kindergartens, hospitals, commercial premises.

Thanks wide abilities, acrylic paints found their place in such spheres as painting, painting on china, fabrics and skin. Quite often, acrylic emulsions are used for external and interior finishing works.

They can be applied to such surfaces as:

• Plaster.
• Brick.
• Fibro- and asbetic plates.
• Wood.
• Concrete.
• Glass.
• Metal.

This is not a complete list of suitable basics.

The composition of acrylic paints includes three main components:

• 1. Emulsion polymer acrylic.
• 2. Painting pigment.
• 3. Water.

This coating creates a solid film that can resist water and however, it is capable of passing steam, which is important for work in residential premises, because Allows the walls to "breathe".

Advantages of acrylic paint

Acrylic paints have a rather long list of positive qualities:

• Durability and wear resistance.
• Fire safety.
• Small paint consumption.
• Resistant to ultraviolet.
• The resulting film does not pass water, but steam is fluently through it. This is especially important when working with wooden structures. Acrylic allows wood to "breathe", withdrawing moisture from the inside of the house outside. Good water repellent paint properties allow you to perform finishing work In the bathrooms and kitchens.
• Quickly dries. Depending on the purpose and composition, the squeezing period can be from half an hour to 2 hours.
• With acrylic, you can even work in rainy weather.
• The paint is rather elastic, so when the house shrink, there are no cracks on the coating.
• As a solvent, water is used instead of aggressive caustic substances. Thanks to this, acrylic paints are safer to health.
• If the paint falls into an unnecessary place, it is easy to remove, while it does not damage the surface.
• Available prices that are slightly lower than on oil paints, make acrylic enough popular material.

This material is available for both internal and external work. Appropriate quality paint can be applied to the outer walls, facades of buildings. She is well withstanding the influence of changeable weather. When raining begins to go raining during painting work, it is not scary. The paint dries quickly, and after it is not prone to peeling. At the same time, water resistant qualities are not reduced.

Acrylic is considered an environmentally friendly material, because He does not have toxic discharge. In the drying process, the water is evaporated, which was used for paint breeding. Therefore, workers can work without respirators and other elements of individual protection.

Before you begin painting work, you need to prepare the basis. It should be dry, clean and durable.

• Surface is cleaned, removed old paint.preparing plaster, wallpaper, etc.
• Dust and dirt must be considered, walking in a damp cloth. If pollution is strong, then you may have to wash the surface with water.
• To secure the toed material and reduce the consumption of acrylic emulsion, the base is ground.

Attention! If the walls were erected quite recently or the fresh plaster was applied on them, then it is necessary to refrain from painting work within two weeks. This is necessary in order to reduce the level of alkalinity on the surface being processed.

If the paint is not covered by texture plaster, it is desirable to align the base to be smooth and smooth. Because subsequently, the existing shortcomings can manifest.

Paint before applying is divorced clean water. It is advisable to do this in a separate container if you do not set the tasks to paint the entire facade of the house at one time. It is better to repeat this operation several times than subsequently throw away the unsighted dried paint.

In order for the rest of the paint subsequently, it is suitable for use, you need to clearly clean from the residues of the paint of the edge of the packaging and reliably close it. If you ignore these actions, then it will be impossible to open this packaging in good way. The tools after work also need to be washed with clean water. This will prolong their service life. If you immediately do not do this, acrylic will freeze, and it will not be easy to remove it.

Depending on the type of work, paint must be prepared. If the texture is needed, then add a thickener. When a smooth coating layer is needed, we break the acrylic emulsion with water to the desired consistency. Special additives can change the paint, giving it a mattitude or gloss.

Despite the fact that acrylic paints are produced in a fairly wide color gamma, There are always situations that even with a large selection does not turn out to be the desired shade. This is fixable, because you can always mix a few shades and colors to get that effect that was conceived.

You can apply acrylic with the help of kraskopultum, roller or brushes. Smooth and high-quality staining is achieved by applying two layers of material.

Separately, it is worth noting the features of the work by acrylic by plaster.

During the completion of the task, you must follow the following sequence of work:

• When working with a smooth plaster, it should be aligned to eliminate all irregularities and flaws. This can be done with the help of sandpaper wrapped around a wooden bar. Although, there is a special tool that allows you to secure the emery canvas on a wide platform. In any case, the surface must be aligned, smoothding all irregularities. If the work is made on texture plaster, this stage can be skipped.
• According to the contour of the surface of the surface, we deposit the greasy tape, which will help perform the staining extremely neatly. A simple and simple action will save you from the need to remove unnecessary random strokes with adjacent surfaces.
• Various rollers are used for texture coloring. To fill deep folds take a hide with a long pile. And when you need to apply another shade on top of the convexities, rollers with a short pile are used. Depending on the desired effect, brushes and other tools are selected.
• To work with roller, special trays are used that allow you to adjust the amount of paint applied to the tool. With them, you can always be sure that it is applied exactly the layer as you need.
• Performing a smooth painting, the roller needs to be moved in one direction. If another technique is assumed, then the movements are coordinated depending on the desired effect.

Despite the fact that the recommendations often meet the words that work can be performed during the rain, nevertheless, after precipitation, it is advisable to refrain from work and wait until the surface is dry. It is also not necessary to paint at temperatures below + 5 ° C and with strong wind. Heat over + 27 ° С the best way affects the end result. If the paint for any reason has frozen, after thawing, it does not restore its properties and is not suitable for use.

Today there are many types of paints on the market. Some of them are only suitable for specific use on a specific surface, and some have a universal purpose. Any paint is applied for a long period, so it is very important to choose correctly not only suitable color, but also the composition of the coloring matter.

Paints with acrylic

The extensive prevalence of acrylic paints used to create a glossy or matte stroit is due to their ability to create durable opaque cover almost on any of the primed surface. The main component in the dyes of this group is acrylic resin. The silky structure of this material that is similar to plastic allows you to create special paintwork structures with high strength and decorative properties. Almedy acrylic facade paints - This is the best solution for the external use of such paints.

Resin, in conjunction with color pigment and other components, gives paints such additional positive qualities as:

• excellent indicators of adhesion or adhesion;
• abbreviated drying time;
• preservation of workers and decorative qualities at different ambient temperatures;
• increased resistance to aggressive media and mechanical effects.

Coating is resistant to abrasive abrasion and is perfectly preserved even in conditions high humidity. Most often, the elastic polymer paint is used when painting metal and wooden surfaces. However, it perfectly lies with a plastered wall after complete drying of plaster.

Characteristics of water-free paints

Water-emulsion or water dispersive paints are formed by fragmentation of large particles into small. The liquid and pigment form a compound in which are not divorced, and the discharge components. Polymers are included in the package of various painting of emulsions.

After drying the layer, the liquid evaporates, and the solidified polymer film remains on the painted plane. The hydraulic is not a caustic smell, so it can be used at all time.

It may include such components as:

• film consumers. Polyvinyl acetate and others;
• colored or white pigments, such as zinc oxide or titanium dioxide;
• fillers. Chalk, calcite, talc and others;
• thickener. Glue CMC;
• solvent. Purified from mineral impurities water;
• antiseptics and other additives.

The percentage ratio of all included elements is a decisive factor in determining the appointment of staining hydraulic windows.

Comparison of two types of paints

When comparing the colors of two species, it is worth considering that both of them belong to the discharge of water-based. The composition with acrylic is one of the subspecies of the water-emulsion. Improved specifications The polymer base is allowed to quickly paint smooth and textured surfaces. Such a mixture cannot be washed with water even with the help of chemical solvents. The water suspension is easily removed without the use of special preparations.

The main similar properties of two mixtures can be considered:

• ease of use;
• almost instant drying;
• environmental purity;
• lack of unpleasant odors;
• slow burnout under the influence of time and ultraviolet.

The composition with the polymer can be painted not only a tree or plaster, but also metal surfaces. The cover, based on water, is absolutely not held on the metal and all types of enamels. In addition, the water emulsion cannot be painted already scratched surface. In this case, the composition with polyacrylate will work perfectly.

The paint will be equally well after the work in the interior. Acrylic paint is more suitable for processing facades of facades. The coating can hold out about ten years. The water-emulsion composition will be washed away by the first rain.

It is important that starting repairing or painting new building structures, to figure out for which materials is suitable for this or that paint. Given that an acrylic-based version does not give cracks and resistant to humidity on all sorts of surfaces its use is considered more popular. The uniformity and convenience of applying water-based emulsion will help to quickly paint the walls and ceilings made of concrete or bricks in the interior.

To ensure that you can get a uniformly scratched layer, you need to buy the necessary coloring chemicals only in specialized profile companies or stores. Managers in such commercial organizations carefully comply with the rules for storing the goods and track the utilization deadlines.