Acrylic paints flooded the market by reducing the position of the rest of the varieties. Acrylic on auto masters recommend using for painting most body elements, and sometimes the cabin. The paint is based on water, it evaporates quickly and the mixture is frozen. To dry the substance is capable of applying if the storage conditions were violated or the shelf life has been exhausted, it is also recommended to dilute thick paint. Many prefer to buy a new liquid than to dilute acrylic paintIn reality, the process of breeding is lung and does not require much time.

Decorative coating and its components

Paint is easily applied on most coatings, providing adhesion and sufficient durability. The problem often becomes inappropriate consistency of the paintwork. The thick paint creates an uneven layer, in some places saturation is excessive, and in others the original body color is shifted. The easiest way to solve the problem is to dilute the substance. Deciding than you can dilute acrylic paints and taking an easily accessible fluid for breeding, will not work to create high-quality coverage.

Acrylic paints are easily applied on most coatings.

The composition of the paint is always present 3 main components:

• Water.
• Pigment of the corresponding color.
• Connectors.

The most important component is the emulsion from polymeric materials, in its composition acrylic. High technical, operational qualities and ease of application made it possible to use paint in a variety of spheres. The advantages of the composition:

• suitable for various facade works;
• helps in creating an interior;
• coloring various material;
• increased resistance to ultraviolet rays, it allows the use of a tool on the street;
• durability, the material does not fade, resistant to peeling, destruction and mechanical damage;
• affordable price. Today, acrylic is attached to the low price category, it is always preferred to save money, although characteristics provide and decent quality;
• application does not require professional skills, man in the power to perform staining alone.

Paint does not require professional skills

Dilution is an important procedure so that the car turns out evenly and high qualityly painted. In part, the addition of fluid is carried out as desired, and in some situations it is not necessary to do without it.

Information on how to breed paint for collapse and other staining methods is applied to the container, but experts are additionally based on current tasks. A thick solution is often used for the coarse layer, and the finish staining is performed by a more liquid substance. Here everything is individually, but there are some norms for which it is not recommended to go out.

Features

An important feature of acrylic is naturalness, ecology does not suffer from the use of the automotive composition. There are no pairs and sharp smell from paint. The advantage of acrylic is a variety of shades, it is easy to get any color with the help of special pigments in the appropriate dosage.

Due to the water basis, the substance is resistant to ignition. The listed qualities contribute to the use of acrylic in residential premises and small spaces. Water evaporates quickly, why the material is frozen faster than analogues. An important advantage of the composition - acrylic can be breed even after drying, so the substance will return to the original appearance. Just need to know how to distribute acrylic paint, and recommended rates.

Automal Acrylic Mobihel.

Selection of substances

Taking into account the diversity of the uses of acrylic, the choice of the dilution method and the type of fluid often differs. For dyeing furniture or creation of decor, liquid paint is required. Such an approach does not allow to eliminate irregularities and defects. In this area, water is often used, and the solvent for alkyd paint should be avoided.

But we will pay attention to the fact that the solvent is to dilute the car paint. There are 2 leading varieties of solvent, which are usually preferred by professionals:

• Water. The liquid is part of the paint and in the correct proportion will definitely not harm the quality. Creating optimal density is possible without the use of aids. The method is cheaper and easier to use.
• Special solvents. If you choose how you can breed acrylic paint, except for water, you need to take into account the dependence of the solvent quality from a particular manufacturer. Usually the recommended breeding fluids is reported on the packaging or official website. Such compositions are popular thanks to the ability to dilute thick paint and additionally give a matte or glossy look.

If for comparison to consider how to dilute alkyd paint, only a special solvent is used. Many manufacturers make the composition suitable for breeding universal solvents, others create special fluids and sell them separately.

Solvent and its use

The solvent is sold in bottles, is a transparent colorless liquid with a specific aroma. Most companies in parallel sell acrylic-based paints and special solvents. Their use is justified to impart additional decorative properties of the coating. Similar approach from "Mobihel", Duxone, Body, "Martex" and so on.

Solvent for acrylic paints Bulmat

Using a special discharge, you can achieve:

• special texture coverage;
• glossy effect;
• matte view.

In cars, it is popular with a metallic painting, the desired solvent is present in the assortment of most stores. Sold in banks, the selection will help to perform in the store or on the thematic forum. A solvent is often used to accelerate the process of frozen, it helps to perform work in a short time.

When choosing an option than and how to dilute the paint for painting a car, with special properties, it should be prevented a decrease in the basic characteristics of its composition. An example will be the paint "Polystyl" with increased resistance to temperature, if you choose any solvent with a tendency to burn or deformations from the heat, the coating will lose up to 40% of its qualities.

There are several ways to distribute such liquids, the most common classification - drying speed:

• fast. Actively used for low temperatures, helps to fix the paint on the car in hard conditions;
• average. Classic compositions, on the shelves, their more;
• low. Optimally suitable for high temperatures, since the substance prevents excess evaporation.

Diluent for acrylic paints Mr. Color Thinner 1.

The key influence on the characteristics is the ratio in which the composition is planned. The range of obtained fluids at the exit will vary greatly, it is selected taking into account specific requirements. You can paint acrylic paint as an almost transparent layer and very rich color.

How to breed

The dilution method is significantly easier enamel, but depends on the method of application. If a painter becomes paint the surface of the spray, the liquid is prepared more discharged.

There are many solvents, but you should select those that are suitable for metal surfaces. They are purchased in construction or automotive stores. If it is planned to use water, it is necessarily taken by distilled, purified from additives, since acryl is somewhat more sootheful enamels. When doubt about the consistency or types of solvents, it is recommended to make trial mixing in small portions.

Today, several basic proportions and methods have been developed, how to dilute the paint for painting cars:

• 1/1. Used for initial, coarse layers due to low fat content and more easy application with a brush;
• 1/2. More often used for the secondary layer, the brush is better impregnated with liquid and creates thin, uniform layers;
• 1/5. It is characterized by increased adhesion, the liquid penetrates into small pores, cracks and other irregularities. Relevant to use for textured surfaces;
• 1/15. Used for specific tasks - creating a gradient or a special decor with different saturation of the painted surface. It turns out a mixture in which the paint applies only to give a soft, low-odd shade. With repeated application, it is possible to create an attractive view from the transition from weak to pronounced color.

Solvent for acrylic paints X-20A

All paints are sold in the form of a thick mixture, so the emergence of the question, how to dilute the paint for the collapse is obviously and justified. If you wish to achieve a uniform layer, using a sprayer, it is better to use liquid options - from 1/2 to 1/5.

Obtaining the necessary density

The thickness of the mixture contributes to the creation of a saturated color, but for real tasks almost always have to breed the mixture. Working with liquid paint is performed easier, and the surface is easier to align.

To create optimal thickness add:

• water. After drying the composition with water, paint is not laundering;
• special funds. It is recommended to study the instructions and tips of manufacturers;
• solvents. It is important to specify the preservation of the properties of the composition;
• other paints. Acrylic group of paints and varnishes is well mixed with each other.

The selection is carried out taking into account the characteristics of the application.

What to do with dried paint

If the paint managed to dry, it can be returned to a suitable condition with a little worsening technical characteristics. It is recommended to restore the use of water.

Initially, the frozen paint should be dissolved. The piece is placed in the metal container, it is poured with boiling water. Gradually, the liquid will be cooled, but pouring boiling water, maintain a high temperature. After the final water absorbing the particles of paint, proceed to mix with pigment and / or staining.

Acrylic paints than to dilute should be solved immediately. And not only this. It is worth understanding how much it will suit you. After all, the dyes are quite a lot and another option is quite suitable. Below will be instructions for acrylic paint, you will learn about its properties and where it should be applied.

Currently enjoy in great demand, having half a century utilization, has proven itself as a reliable, high-quality finishing material. It is used when staining any surfaces of walls, ceiling and floor.

Suitable for applying on bent walls, made of metal and wood. Weighing popularity, a number of advantages.

Let's immediately consider the positive aspects of this material:

• Environmentally friendly product - harmless and safe for humans and the environment;
• Very convenient acrylic paints, possess such important for repair work qualities as the absence of a specific smell;
• In comparison with the rest of the species of paints, acrylic paints are rich in variety color Gamma. shades so that you can choose for every taste and preference;
• Quick-drying paints;
• After staining, the surface is elastic, you can easily clean, the paint is not erased;
• The material of the acrylic paint does not collect dust on its surface and various pollutants;
• Double Effect: The air easily passes, allowing the walls to breathe, but the water does not pass, keeping the surface from damage;
• Reliability of use, service life exceeds a ten-year term, depending on the correctness of the selected manufacturer.
• The price is also quite attractive. After all, her purchase can afford everyone.

The composition of acrylic paint includes main components as:

• Pigment;
• Binders;
• Water.

Emulsion - synthetic material that serves as the main element of the binder for all dye models, based on polymer acrylics. Paint dries in as soon as possible, due to intense evaporation of water.

The last step is to cover the elastic film of the entire surface, where the paint was applied. It is stable even in the face of ferocious frosts, there are no cracks on the surface, it is not typical of declaration and other side effects.

The distribution of acrylic paints by type is carried out in connection with them:

• Application;
• Resistance before external influence;
• White level;
• Brightness, glitter;

The combined and universal acrylic paints differ, depending on which is needed for a specific type of work, as well as the purpose of using them: applying to the outer or internal surfaces.

Attention: when choosing acrylic paint, it is worth paying special attention to the qualities that possess it. separate species: Stability before the influence of light and moisture, as well as physical influence.

Multidisciplinary uses can boast the creators of acrylic paints whose popularity is distributed not only in the construction sector, but also in artistic work. Thanks to such paints, the painted glass is decorated with a glass (see), patterns on ceramic dishes, painted on canvas or watman, and even on leather products.

This is not limited to the scale of the use of popular acrylic paints: their benefits applies to materials from bricks, plastered surfaces, wood, concrete, as well as lacquered areas of objects.

It is necessary to carefully select species of paints from acrylic for staining walls of the room with optimal temperature air and humidity. Its qualities allow to apply for staining of many surfaces: after applying plaster, drywall, various embossed areas.

What remedy is suitable for dilution of acrylic paint

First of all, it is important to understand the need to dilute acrylic paint with other substances before proceeding to the definition of these funds themselves.

• In terms of its composition, acrylic paint has a sufficiently thick consistency, in connection with which it is extremely necessary to breed it before applying to various surfaces and objects. This process is the most important stage of work before staining, the essence of which consists in a convenient, high-quality, uniform distribution over the entire surface.
• It is important to understand that acrylic paint in open video For a long time, also needs dilution. If you do not comply with all the rules for preparing paint to use, especially when restoration old furniture Or the creation of masterpiece painting, the application of acrylic paint on its surface will leave tracks used when working tools. Therefore, it is necessary to dilute the paint, not only for the uniform distribution, but first of all in order not to spoil furniture.
• Moving directly to the components themselves, with which they dilute the paint. The very first and most important is water, which is the basis of all acrylic paints. The chip is that even after dilution and staining, the surface has the property of waterproof. Experts advise carefully process and clear the entire toolkit after performing the work.

ATTENTION: Instructions should be studied when buying a dye. So the manufacturer writes what solvents can be breed and how to do it. Basically, this composition produced by this company and their price is not small.

We are talking about mixing various branded components with paint, you can create a matte or glossy surface. In order not to make a mistake with the choice, you need to consult with professionals and get acquainted with the instruction of each kind of paint, its properties.

Applying water to dilute acrylic paint: proportions and features

Having stopped at the choice water base As a diluent acrylic paint, it is necessary to explore the recommendations for its use.

It is important to achieve proper consistency and proportions, so as not to spoil the paint and its basic properties:

ATTENTION: only purified water is applied to dilute. There should be no additives. It is also necessary to check the proportion on a not large amount of dye.

• We make a probe first. To do this, you should use a pipette or a syringe. We need to accurately determine the proportions. It is also worth take and not a big paint bottle.
• Let's try to dilute one to one. This is the most common option. But here it is worth saying if you need a steep dye, then it is worth starting dilution with a smaller volume of water.

When painting should be applied not one layer, and you will need several variants of the dye, different viscosity.

We do everything as follows:

• Immediately we divorce the dye in the proportion one to one. After all, the first layer will be basic. This will be the basis for subsequent application. This composition does not stick to the brush and fits well on the application base. Also the layer is uniform and without inclination;
• You can also continue to do the proportion and one to two. The paint sticks well to the brush, but the layer turns out more subtle. Here you have to follow the subteps and smear the dye more thoroughly. Such a variant of dilution is suitable for the second layer;
• If you add more water than three times, then it will be pretty liquid mass. Moreover, the concentration will not be high and the dye will be light. This composition does not stick to the roller or brush. It is suitable in places where there are cracks, or steep transitions. Then he penetrates everywhere.

So the more water, the less concentration. But surfaces are different. If the dye is used as a soil, then sometimes it is needed and strongly liquid. For example, a tree.

If you apply just a thick paint, it does not fit into the surface and will lie down a layer that is easily separated. If it is for started to be soaked with liquid composition, then it will penetrate the base and the subsequent layers will hard hold.

How to breed an acrylic dye for drawing on the wall

To create drawings, applied dye in tubes. It is quite possible to draw a picture on the wall, and if you are an artist, then you can safely apply for web. But here there are features.

Let's look at the details of this breeding:

• In this case, also applies a pipette for adjusting the dosage. The process occurs on the palette, it can be wet or dry. It is also possible to breed for samples just in a tube cap;
• If you make a drawing on canvas, or on the wall where there is already the basis. Then the breeding must be done on a wet palette. It will be extremely fast on the dry dye;
• The ratio of water and paint will be determined by the desired drawing brightness. The waters are more, the brightness will be less. You just need to experiment.

Recommendations of specialists for dilution dyes

When diluted with water, it is necessary to be extremely attentive. Always near need to have a cloth, it is in case the paint drops or it will be necessary to remove it from the plane.

• It has already been said that water should be clean, but as practice shows, it is not always possible to determine this eye. Therefore, before applying it is worth putting water for a couple of hours to stand. Everything does not need to fall into the sediment. Also, it will not be superfluous and filtered.
• With a large amount of work, it is better for applying the dye to apply the spray gun. Here you will need to choose the desired viscosity of the composition. He should evenly go to bed and be not liquid, otherwise they will flow. Also pay attention to the solvent. After all, the sales market is full of falsification. Therefore, it is worth taking proven brands.

Than you can dilute acrylic paint should be solved immediately, because this will be changed:

• The solvent will affect appearance Dye:
• It will also affect the strength of the dye;
• Not just a structure, but also color.

ATTENTION: Instructions must be studied before buying a solvent. So the manufacturer writes which proportion is better to stick and what changes in the paint will occur.

• Also during dilution it is worth using a building mixer. Indeed, in this case, you will qualitatively make a solution with homogeneous;
• When cooking the dye is best used tunner. This substance you can not just withstand the color of the dye, but also give it the desired tone. But you should not make an additive immediately for the entire volume. To begin, it is necessary to make a not a big probe and choose the desired concentration, and only then to add to the entire volume;
• You need to choose the desired tool for applying the dye. This can be made with a brush, roller and paint (see). But it should be remembered that the layer and the uniformity of application will depend not only from the dye, but also from what you apply it. The thinnest and uniform layer will be when using the collapse, but here you can do not correctly apply and make items. But when applying the collapse, the dye will fall into hard-to-reach places;

ATTENTION: Cook must be prepared with a slight margin. After applying, you will need to paint and the same solution will prepare extremely difficult.

If acrylic dye dyes

Many know, leaving the dye after the opening of the can, he dries. Indeed, during the time of time, water evaporates and the polymerization of the composition occurs and the question arises than to dilute acrylic paints if they dried. And this question is solved, although it will be necessary to work.

• If the dye is not strong, but simply became very viscous, then you just need to add water with alcohol and wait for its dissolution. In this case, it will be necessary to intermittently stirring it;
• If the dye froze strongly, then first of all its composition must be changed to the powder. After all, after drying it turns out just a separate large com. Which will be difficult to dissolve. So we take a hammer, chisel or something else and just smash it. The smaller the grains are, the better;
• Now pour hot water. But here do not stand. We just need to warm the dye. Therefore, we pour water, mix and drain it. If there is no needed thickness, it makes re-;
• If the paint warmed up, pour again hot water And mix. After all, a heated dye will not cool the water and will dissolve faster.

ATTENTION: You can dissolve paint. But here it should be remembered that the characteristics will change for the worse.

Use acrylic dye

Acrylic paint dissolution, important moment. After all, the quality of the plane will depend on it in many respects. With a thick dye, the stripes will remain, with a liquid, the color will not be uniform. But equally important and high-quality application. On the topic of coating on the wall, experts give their recommendations:

The whole process is divided into three parts:

• Dilute the dye must be repulsed from the application plane. It is always necessary to make trial application and make sure the coating;
• Also you need to understand what you will breed. If water gives a liquid composition, it will change the color and structure of the dye. Therefore, it is not always suitable. If you dilute with a solvent, then when painting a metal, it will be the most optimal. Indeed, in this case, the coating will not be launched;
• If when you open the paint, you notice the film on the surface. Then need preparation for applying. The film is removed. The dye is stirred and focused through the gauze. The composition should be completely homogeneous;
• Carefully select and tool for applying. If this plane is not big, then it is quite possible to do and brush. But if you have a lot of work, then you will need a spray gun for uniform application;
• With painting with a brush, never make a large corner of the brush with respect to the plane. Then you will have a strip;
• The application of the brush is made evenly and without a strong pressure;
• Also when applied with a brush, do not take stripes in one direction. They must be constantly changing.

ATTENTION: If the painting is done in several layers. Then each subsequent is applied after complete drying of the previous one.

You can dilute facade paint And any other. It is important not to overdo it with the solvent. After all, you change its composition. But having looked at the video in this article and the photo you can do everything with your own hands and practically without errors.

Among the paints and varnishes today, acrylic paints received widespread. Their components are water, color pigment and binders. The surface dries quickly and has useful properties. If the prepared paint volume is not used immediately, there is a need for diluents. Choose and apply them is especially careful.

Features

Acrylic paint diluent is often confused with its solvent. Errors in the use of these substances will not allow the desired effect. The solvent mixtures are designed to make the frozen paint softer, simplify its removal from the surface. The properties of the coating over time are inevitably deteriorating, drying time increases. Diluents for acrylic paints are designed to affect the delicate of the dye, they accelerate the drying process and increase the practical qualities of the dye, sometimes increase the saturation of the color. Often diluents and solvents confuse even professional merchants.

You need to carefully study the label, instructions and accompanying documents before purchased.

How to dilute?

Since water includes water, it is permissible to add water with small portions. However, it will have to take only a clean and not containing any outsiders water. Slowing paints are diluted with building mixers in a special capacity. When it is assumed to use the whole mixture at once, it is bred in branded package. Liquid pour into small portions, otherwise the LKM can become too liquid.

We will have to put up with the weakening of the saturation of the color or enter into the paintwork the additional portions of the pigment.

An alternative is the use of diluent:such mixtures today are released in a wide range. The coating when using them becomes better, dries faster. Depending on the type of diluent, it may acquire a matte or glossy shades. Diluents have a pronounced smell, but it easily passes, as soon as the mixture dries.

How to dilute with water?

Before starting work, it should be found out whether liquid is clean. Enjoy hot water For dilution, paint is categorically unacceptable.

Consider typical proportions used by experts:

• 1: 1 - when it is required to prepare the base layer (moderately thick and evenly stacked);
• 1: 2 - When you need a texture that does not spread and is conveniently recruited on the brush or rollers (gives a thin layer of paint);
• 1: 5 - the original color is almost lost, therefore it is necessary to introduce large portions of the pigment (such a mixture must be used according to figure and small surfaces);
• 1: 15 - This breeding helps to create a feeling of the blurred color shift between the full paint in different places.

How to use diluents?

And in artistic, and for construction purposes, acrylic paints are diluted by approximately the same technology. When the air temperature is low, the paint itself is poorly held on the surface, the diluent will help to correct the position. Apply the compositions of the universal series you need when work in the premises with room temperature. Preparations that differ in low evaporation rate allow you to apply the coloring composition with a significant heating.

Storing the diluent should be taking into account the instructions. The container is closed with a lid as close as possible and put vertically in a dark cool place.

Diluent acrylic "Chemist" It can be used for dilution of automotive enamels with a pearl and metallic effect. With it, it is easy to remove acrylic pollution from the surface of the painting tool.

Diluent Tamiya. Effectively copes with the most different acrylic paints. Compared to conventional solvents, it is much better. This composition not only helps to dilute the dye without loss of quality, but also safer for health. Fully hardened paint, merging in a thick lump, easier to throw away: it will not give any benefit.

From the next video you will learn how to dilute acrylic paints for an airbrush.

Acrylic-based paint is one of the popular materials for designing facades of buildings and conducting internal work. It is quite simple to apply, but due to a thick consistency, the coating is sometimes uneven or too saturated. This problem can be easily avoided if you know how to dilute acrylic paint.

Decorative coating components

Before using one or another paint, it is advisable to understand which substances in it. After that, most likely, the problem of choosing a solvent will disappear by itself.

All acrylic coloring mixtures have three main components:

• water;
• painting pigment;
• binders.

The latter ingredient in acrylic paint is a polymer emulsion, which includes acrylic. This causes and choosing a name for the decorative material under consideration.

Paint has a very wide range of applications: from facade works to coating surfaces indoors. It practically no matter what material is painted.

In addition, one of the features painting compositioncontaining acrylic is its resistance to the effects of ultraviolet radiation. Therefore, the surface remains bright and attractive for a long time.

Well, the latest advantages - the price that makes the considered finishing material is one of the most affordable on the market, and ease of use, which is especially important if you decide to repair your own hands.

Dilution of acrylic paint

Choosing a substance

Before you choose how you can dilute acrylic paint, you should determine the area of \u200b\u200buse. For example, if it is necessary for painting furniture or writing paintings, too thick consistency will not allow to get rid of defects of the decorative layer, which appear from the brush or roller.

There are two types of solvent.

1. Water. Given that this liquid is one of the main components of the paint, it is perfect for dilution. Remember that after drying acrylic, on the contrary, it acquires water-repellent properties. Because the tools used should be cleaned immediately after the end of the work, otherwise they will be ruled.
2. Solvents. The choice of a particular substance depends on the paint of which manufacturer you use. This option is more suitable in the case when in addition to the desired density you want to give the future coating additional properties (mattness, gloss and so on).

Note!
There are some types of paints whose use has its own characteristics.
For example, Zinga electrically conductive paint.
The nuances of its application describes the instruction printed on the label.

Articles on the topic:

Use of water

Before diluting the facade acrylic paint, it is necessary to take a small amount of its amount and add water with a pipette or bubble, which sold drops from a cold. So you can calculate the necessary proportions.

Hard requirements do not exist. The most common options are reduced to the table.

The use of solvent

Acrylic paint companies also produce special solvents needed to make decorative color coatings of additional properties.

With the help of certain substances, you can get:

• matte surface;
• glossy coating;
• texture.

Some additives also accelerate the drying time, which has a positive effect on the period of repair work.

Note!
Fire retardant paints for metal polystyl are used only with special additives that do not affect their main technical specifications.

Externally, the solvent is a transparent liquid with a specific odor.

They differ in dried speed:

1. Fast. It is used in cold weather to reduce paint fixation.
2. Average. The name speaks for itself.
3. Low. The solvent at such a speed of drying is necessary in hot weather to reduce the level of moisture evaporation.

The resulting effects, as in the case of water, depend on proportions. You can get a lightweight, transparent layer, resembling a picture of watercolor or thick, rich shade characteristic of the canvases made by oil paints.

Dilution of dried acrylic paint

Often incorrectly stored material dries out and becomes unsuitable for use. Most often, he is sent straight into a trash can. However, if you wish, you can restore paint. Of course, its characteristics will slightly decrease.

For this you need:

1. Grind the paint-available paint using an acute subject until it reaches the consistency of the fine powder.
2. Pour boiling water and give the mixture to warm up well.
3. After cooled fluid, the procedure should be repeated.
4. Then the excess water to merge, the contents of the can mix and bring to the desired consistency with a solvent.

Output

Before using acrylic paint, it is in most cases it is necessary to dilute with water or solvent. Using the Tips given in the article, you can get a material that matches your requests as possible. With it, you can embody the most courageous design fantasies.

In more detail about painting, you can learn from the video in this article.

When carrying out repair painting works in the house, there is often a need to dilute too thick paint to create the necessary consistency for applying a tassel, roller or. At the same time, for each type of paint, you need to use your solvent.

Acrylic paint: characteristic, dilution features

Paints for finishing work There are alkyd (enamel and oily) and water-dofeda. The latter today are the most popular and feature a special variety of species. Acrylic paint among water-dispersion is the most sought-after. This is an environmentally friendly material, which includes a binding material, pigment and water. After the paint dries, the binder becomes transparent, and the paint layer is very strong. Used acrylic for dyeing various surfaces inside or outside the room.

Since acrylic paint is a water-based dispersion, then it is diluted, if necessary, most often, water, which should be clean, cannot contain impurities. For breeding, it is necessary to pour part of the paint, which is intended to be used in a bucket or other convenient capacity, add a small amount of water and stirred by a building mixer to a homogeneous state. If you failed to achieve the desired consistency, then you need to add some more water and stir again. After the required density is obtained, the dye is added to the composition, stirred to get the homogeneous color of the desired tone. After that, you can proceed to staining.

Important! Acrylic paint dries after evaporation of fluid. After drying, the binder and pigments form a solid film that does not penetrate, it does not crumble, does not form cracks and is not washed off with water. Therefore, the brushes that you want to use again need to be thoroughly rinsed with water until the paint dries on them: after drying it will not be possible to do.

Acrylic paint solvent

It should not be thought that the acrylic can be diluted only with water. Manufacturers of straight-colorful materials produce special diluents for acrylic paints, which provide the painted surface of the matte or glossy texture, and also significantly accelerate the process of drying it. If it is necessary that the surface after staining glitter use glossy formulations, if a matte surface is required, use the appropriate diluent.

Solvent for acrylic paint is transparent liquidhaving a specific smell. It varies with the time of drying the colorful layer (rapid drying, average, slow). One or another is applied depending on the humidity and temperature indoors: in hot weather, a composition having a low level of evaporation is usually used, and a solvent is better to use a solvent with a high drying rate. One of these solvents is Relocryl Acryl.used for acrylic paints, primers, varnishes.

By adding more or less diluent, you can achieve different effects of the painted surface: from a thin, transparent layer resembling watercolor to a thick, imitating oil; From bright, saturated, intense tones to faded, muted shades.

Store such compositions should be in a closed form in a vertical position in cool, well ventilated, dark rooms, with observance of sanitary and fire standards.

Important! After completion of the work, it should be sealed with a can with a lid to protect the paint from drying out. Before that, it is necessary to thoroughly clean the edge of the cans from the paint, otherwise the dried paint will make it problematic the opening of the container next time.