Evaluating air parameters in the house, most people first of all draws attention to its temperature, forgetting about such an important indicatorlike humidity. It is from it that the subjective feeling of heat or cold depends, the overall state of health, the state of plants and the safety of many household items. We'll figure it out what the air humidity rate in the apartment, and also find out what it affects.

The humidity indicator reflects the degree of air saturation with water vapor. It is absolute and relative. In the first case, it is determined how many grams of moisture is contained in 1 cubic meter of air. In the second, the percentage ratio of the actual amount of water in the atmosphere (absolute indicator) is calculated and the maximum possible at a given temperature.

When using such a thing as a moisture rate in the apartment, it is implied by a relative indicator. This parameter largely determines the comfort of the microclimate indoor. And the person and the home furnishings suffer from overly high or too low humidity.

Dry air indoors provokes increased moisture loss through the skin and respiratory tract. This can lead to such unpleasant consequences as:

• reducing hair elasticity, nails and skin, accompanied by the appearance of microcracks, wrinkles, peeling, dermatitis;
• drying the mucous membrane of the eye, the symptoms of which are itching, redness, the feeling of "sand";
• thickening of blood, leading to a slowdown in its circulation, weakness, headaches, reduce performance, improving the load on the heart;
• an increase in the viscosity of gastric and intestinal juices provoking digestion slowdown;
• the drying of the mucous membranes of the respiratory tract, the consequence of which the weakening of local immunity and an increase in the frequency of the ARVI;
• increasing the number of respiratory allergens in the atmosphere, which in the norm should be covered with fluid droplets.

Excess moisture in the air creates acceptable conditions for reproduction of mold, fungi, bacteria. As a result, residents of the house may encounter:

• respiratory diseases - chronic runny nose, bronchitis, asthma, allergies;
• feeling of stuff or dampness indoors;
• unpleasant odor due to the reproduction of pathogenic microorganisms;
• an increase in the duration of drying of the fever.

An excessive or insufficient moisture is badly affected by the state of home furnishings. Plants dry out or begin to rot, wooden furniture and parquet are deformed either "quiet", the paintings are dull, paper products lose the structure.

Factors affecting moisture

The main factor that affects the humidity of the air is its temperature. What he is warmer, the greater the amount of water vapor it can accommodate as much as possible, and vice versa. But in assessing the relative humidity, there is an inverse dependence: the warmer air, the smaller its relative humidity will be the same volume of the water vapor in it. Therefore, ventilating in the winter makes air more fresh, but less humid. Optimal temperature It is considered 18-22 ºC.

Water pairs from the air in the room "Pick up":

• any heating devices;
• air conditioning;
• interior items, especially soft furniture, Toys, carpets.

To increase relative humidity, any water sources and steam leads:

• aquarium;
• houseplants;
• wet underwear;
• boiling water tanks (pan, kettle);
• flowing roof;
• faulty tap pipes and plumbing.

Regulatory indicators

We will understand what humidity is considered normal in the apartment. It depends on the purpose of the premises and time of the year.

Humidity regulations for housing:

• warm period - 30-60%, maximum permissible - 65% (for individual regions with high humidity, this standard can be increased to 75%);
• cold period - 30-45%, maximum permissible - 60%.

The relative humidity of the air is not normalized in the auxiliary rooms - bathroom, toilet, corridor, pantry and others.

Regulations for plants and interior items:

• for furniture and antiques - 40-60%;
• for machinery - 45-60%
• for books - 30-65%;
• for plants - tropical - 80-95%, subtropical - 75-80%, of others - 40-70%.

What is the norm of relative humidity in the apartment where the child lives? Since young children have the intensity of heat exchange processes raised, they are particularly sensitive to non-compliance with microclimate parameters. Perfect air humidity in the children's room - 50-70%. If the child is sick orvi or infectious pathology, then you should not allow to reduce this parameter less than 60%.

Important: In the heating season, air humidity drops to 15-20%. It must be lifted, especially if there are children, asthmatics and allergies in the house.

How to measure relative humidity?

Knowing what the optimal humidity of the air in the apartment should be, it is worth determining how it can be measured. The most rational way is to use a special device - a hygrometer.

There are several types of instrument - electric, chemical, condensation, hair and others. For an apartment should not be acquired by an expensive professional device. The simplest hygrometer is quite simpler with an error of 3-5%. Often, it is combined with a clock and a thermometer. It is important to put a hygrometer away from the sources of moisture and heat.

It is possible to determine the humidity using alternative methods - a glass with water, the Assman table and a fir bump.

Glass of water

You should pour water into a glass and cool it up to 3-5 ºС. To do this, just send the vessel for 3 hours to the fridge. Next you need to put a glass on the table away from the battery and watch it for 5 minutes. At the same time, condensate is formed on its walls due to the temperature difference. Possible results:

• the glass has dried in a few minutes - the humidity is lowered;
• the walls remained duned - the parameters of the microclimate normally;
• thrinks of water flowed on a glass - too much moisture in the air.

Table Assman

The assembly table is designed to determine humidity using a psycho-tape - a device consisting of two thermometers - usual and with a moisturizing device. His similarity can be done at home. It is necessary to first measure the temperature in the room with a conventional alcohol thermometer and write its value. Then you should wrap its end with a wet cloth. After 5 minutes it is required to re-measure the temperature. She must decrease.

Next you need to look at the Assman table. The vertical is the testimony of the "dry" thermometer, horizontally - the temperature difference. Seeing the desired values, you should find their intersection. This will be the indicator of relative humidity.

Spruce shishk

Note: indirect signs of low humidity in the room are considered to dry up the tips of the leaves of plants and electrical discharges emanating from synthetic clothing.

Regulation of humidity

At any time of the year, normal air humidity in the apartment should be at least 30-40% and not higher than 65%. How to regulate it?

Ways to reduce humidity:

• frequent ventilation of the premises;
• installing exhaust fans;
• use of air dryers and climatic systems;
• timely repair water pipes and plumbing devices;
• the use of heaters and air conditioners;
• failure to dry the linen in the room;
• installing an exhaust in the kitchen.

Methods of enhanced humidity:

• acquisition of aquarium or decorative fountain;
• minimal use of heater and air conditioning;
• hanging out wet towels on batteries;
• periodic splashing of water from the pulverizer;
• the use of an air humidifier - steam, ultrasound or traditional;
• regular maintenance of wet cleaning;
• growing a large number of room colors.

Air humidity in the house - important parameter, affecting both the well-being of its inhabitants and interior items. Normally, this figure is ranging from 40 to 60%. It is especially important to monitor the moisture content in the rooms where children spend most of the time, as well as people with respiratory diseases. To adjust the concentration of moisture in the air it is convenient to use household humidifiers and dryers.

Tweet

Plus

Residents even modern new buildings complain of dampness in their housing. Such a microclimate delivers inconvenience, besides, it can cause the development of some diseases. In such a room, mold often appears, which causes allergic reactions and impairs overall well-being. The fungus formed on the wall spoils aesthetic appearance. That is why people are trying to get rid of moisture in the apartment as quickly as possible.

Causes of dampness

The main causes of humidity formation are bad ventilation, moisture sources that are located nearby, weak heating or improperly produced insulation of the room.

Most often have to deal with high humidity in the apartment due to bad ventilation. In old buildings such problems are found everywhere. The fact is that household shafts and lattices are clogged with various garbage, and the air simply does not pass through it.

If the reason lies in the disadvantage of oxygen, then get rid of high humidity in the apartment you can in the following way:

The situation and plastic windows are worsening, especially designs made of poor-quality material.

In private buildings, the owners often save on ventilation, hoping that there will be enough doors and forces for venting. This is a big mistake.

You can lower moisture in the apartment with a good ventilation system. You can set forced extract and strengthen it with special fans. It will help to correct the recovery situation or, especially if dampness is formed due to excess moisture, for example, in the bathroom or indoors with a large number of potted colors that are constantly sprayed and water.

Basic sources of moisture

In order to find out why fungus is formed on the walls, and what to do if there is a large humidity in the apartment, it is initially necessary to identify the source. Such a microclimate may appear due to the following factors:

Very often such problems happen due to the split scene (waterproof material, which is located throughout the perimeter of the house).

On the first floors, the reason for changing the microclimate can become a soil from which moisture comes out.

If the house does not sleep for a long time, then you can not doubt that soon dampness will appear there. To avoid this, it is necessary to warm the walls of the room at least half of the total thickness, in this case the existing condensate will go out on the street, and not to form in the room.

How to get rid of damp on the walls in the apartment with your own hands, in a private house?

Normal indicator Its, but, as a rule, it should vary from 40 to 60%. IN work zone or library level should be slightly lower from 30 to 40%. In the kitchen and in the bath it is much higher.

Depending on the time of year, this indicator will change. For example, in the winter, when included heating systemThe level falls noticeably, although in a wet room it will still be higher than the norm on reasons independent of weather.

Effective methods of struggle

You can get rid of severe humidity with folk recipes. Self effective methods Next:

Getting rid of dampness, mold, fungus

You can purchase special antifungal preparations that help get rid of the problem for one application. How to use them is usually indicated on the package.

The problem of high humidity is relevant even for individual panel premises. How to remove moisture in the apartment so that it does not return, and in your home again it has become comfortable and safe, you will learn from this article. The fact that this problem needs to be solved as quickly as possible - no doubt. After all, in such an environment there is a pathogenic mold, the furniture and other things in the house will deteriorate, it is also not very useful for the structure itself.

Why does dampness occur?

The problem, how to remove the smell of dampness in the apartment, may arise for several reasons:

1. Oblosts in the design and construction of the house.
2. A large amount of linen, which is dried after washing.
3. Poor ventilation and rare room ventilation.
4. Low air temperature in winter.
5. Flooded basement. Thunders with high humidity, mainly the first and second floors. With poor ventilation, dampness threatens the floors above.
6. The use of cheap building materials. Non-quality hinged ceilings, inexpensive plastic windows, vinyl wallpapers - All this turns the room into a box where moisture accumulates.
7. Incorrect alignment is big household appliances And furniture in the apartment, which, as a result, overlaps the exhaust holes and interferes with normal air circulation.

How does dullness and increased humidity manifest?

If such a trouble arose and you decide how and how to remove dampness in the house, you probably noticed the following manifestations of high humidity:

1. Characteristic smell.
2. Condensate on some surfaces.
3. Mushroom mold.

Important! Such signs can appear both separately and in the aggregate. What they are more and what they are brighter - the more aggravated the problem, how to remove moisture from the apartment.

How to find out why the apartment is raw?

Before starting actions, you need to still determine where the dampness penetrates into the house. To find out this in several ways:

1. If you live in apartment house, Come on the neighbors. If they have the same problem, then it's all the design of the house and improper design. If only you have, then your problem is easier to solve.
2. Take the glass and press it tightly to the wall. Leave it in such a state for the night. If droplets of water from the wall were formed on the glass in the morning, the moisture penetrates outside.

Important! If you think you can not pay attention to the humidity, and it will be done by itself, then you are mistaken. She will give you myself to remind a lot of diseases and spoiled mood. The fungal mold promises headaches, problems with respiratory organs - and this is not a complete list.

How to remove moisture in the house?

You already know how to determine the source of the problem. Now, using these knowledge, start to get rid of dampness. If the problem is external, then make a building insulation. What to pay attention to:

1. Warming of the outer wall.
2. Seaming seams between panels if the house is panel.
3. Wall coating with thermal insulation layer inside the apartment.
4. Conducting anti-grapple surface treatment.

How to remove the smell of dampness in the apartment?

If the increased humidity is caused by internal reasons, then you should conduct such neutralization measures:

1. Pay attention to the ventilation system: check the craving and clean it.
2. Check your home as often as possible. It is better to do it in dry sunny weather.
3. Survey all radiators and pipes for leakage. If you find it - troubleshoot problems.
4. Install the air conditioner. It dries air and in this case can be useful to you.
5. Each time during cooking, turn on the hood.
6. Take care of the selection indoor plants. Prefer such that do not need frequent watering.
7. When repairing in your apartment, give preference to natural materials. They are able to absorb excess moisture.
8. Purchase air dryer. He eliminates the damp quickly and efficiently. When buying, pay attention to the power of the device. If it is high, then optionally around the clock operation of the device. Just include it twice a week.
9. You can install an additional heater in the apartment, but it is relevant only for the cold season or for cold houses. In the warm room, such an apparatus will only bring harm.
10. You can purchase some specialized synthetic tools, such as "Stop moisture". They absorb excess moisture and are an excellent absorbent substance.

How to remove moisture in the house - folk remedies

Those who are interested in how to remove excess humidity in the apartment folk remediesThe following method is useful:

1. Take the container. Better beautiful, because there is a possibility that they will be in sight.
2. Pour salt and sugar into different vessels.
3. Establish around the perimeter of your apartment.
4. Change the contents of containers from time to time.

Important! Salt and sugar perfectly absorb moisture. But this is not entirely practical and appropriate. Eliminate the causes of excess moisture and the problem will leave. The main thing is not to retreat and do not regret money for repairs, if it has a need. After all, your health and health of your family depends on it.

Increased humidity in the apartment slowly and gradually has a negative impact on the health and well-being of a person, on the condition and decoration of the rooms, on books and various skin products, wood, clay. With unnecessary humidity in the room weathered immunity and the work of the lungs is worse.

As a result, a person more often sick and caresses, suffers from chronic and skin disease. These are various rashes, allergic reactions and eczema. Therefore, it is very important to fight with dampness and humidity in the apartment, if it is raised.

Increased humidity in the house provokes rapid reproduction of fungus and pathogenic bacteria. As a result, mold is formed on the walls and ceiling, dark spots, the wallpaper is dug in the apartment and appears nasty smell.

Moreover, an unpleasant smell of damp and mold is for a long time entrusted to furniture, bed linen and even clothing. In such a room, it is impossible to store for a long time fruits and vegetables, cereals and flour products, as the products are spoiled for short term.

Most often too wet air is found in brick housesBut for residents of panel high-rise buildings, this problem is also familiar. Let's learn more about how to remove moisture in the apartment and get rid of the smell of dampness in the house.

Causes of high humidity in the house

• Crazening the drawing or completely broken ventilation in the apartment. In this case, you need to contact the management company. What to do if the hood works badly, see;
• The apartment is constantly admired;
• Dampness in the apartment on the first floor may appear due to the flooded basement, from where the humidity and rises to the house;
• Unknown seams between the walls in the apartment;
• Water leakage in the house, which is incorrectly or intimately installed either cannot be determined due to closed water pipes;
• Poor quality installation of kitchen appliances and ventilation overlap;
• Regular drying of lingerie at home in large volume;
• Permanent humidity in the kitchen or in the bathroom can be observed due to incorrectly installed plumbing;
• A large number of colors create too moist climate indoors.

How to get rid of humidity and dampness

Before getting rid of dampness in the apartment, it is important to identify the cause of such a phenomenon and eliminate it. Be sure to check the operation of the ventilation and pipes on the leak, the quality of the installation of kitchen appliances and plumbing devices.

In most cases, including with a flooded basement, disappointing hood and damaged batteries, you need to contact the HOSE or controlling company that controls your home. If the organization does not react and does not correct the problem, it is necessary to higher instances.

Special air dryer will help to get rid of moisture and dampness in the house or apartment. When choosing, consider that the more powerful the device, the more efficient and faster it can remove the dampness in the house and remove the unpleasant odor.

Experts advise the use of modern dryers with humidity sensor in the apartment and change the heating temperature depending on the percentage of moisture in the room. This eliminates the drying of the air and helps to avoid electricity recalculation.

Crude apartment must be regularly made with hot batteries and radiators. The devices dried the room and help to fight mold, fungus and bacteria. But note that continuous heating should be only in the cold season, and sharp temperature differences are not welcome.

Regular ventilation and fresh air indoor - the best ways elimination of excess and high humidity in the house. Open each window in the apartment so that the air is circulated in all rooms.

Be sure to leave the door to the bathroom open at least two hours a day. Instead of conducting, you can use air conditioning that supports the desired temperature and dries air.

To eliminate dampness in a private house, if it goes from the street, you need to insulate the walls and the ceiling. This will prevent moisture from entering the room, protects from the temperature drops and the formation of condensate.

How to remove damp in the bathroom and closet

Many are interested in how to get rid of damp in the bathroom, because in this room the highest humidity. Periodically carry out the room and try to keep the door open, be sure to check the hood job.

To do this, bring a small leaflet of thin paper and bring to the lattice. The door should be open. It is desirable that the windows are open in the apartment.

If the paper is attracted, ventilation works. If the sheet does not hold and falls, it stopped working. In addition, the paper can fly away from the lattice, which speaks about the reverse thrust. In this case, from the apartment not only does not go out of the unpleasant odor, but also falls out.

Therefore, it is necessary to fix and establish the work of the exhaust structure. Also to increase the dryness in the bathroom will help a heated towel rail, with which you need to periodically warm the room.

Sometimes dampness appears in the closet, as a result of which things become wet. To eliminate the problem after washing, be sure to dry clothes in washing machine Or stroke the steam iron.

Folk remedies

To eliminate the problem, you can use folk remedies that distinguishes availability and efficiency. Arrange sugar, salt or coffee through rooms, as they quickly absorb moisture. It is interesting to beat the interior using coffee beans For decor of the room or any items.

Silica gel can be used not only as a feline toilet filler. The universal means is used to store things and get rid of moisture. To do this, put the universal tool in the bags and tie, remove the products into the closet with the linen or in the box with shoes.

Pour the remedy into the container and put under the sink or bath in the bathroom. But watch the little children or pets accidentally did not eat silica gel!

Use flowers that do not need to pour or which absorb moisture from the air. This is geranium, fern and cacti. In addition, the microclimate in the house will help essential oils.

Tea tree, fir and coniferous extracts, grapefruit and lemon kill harmful bacteria, normalize air condition and fill the apartment with a pleasant aroma. Therefore, oils are optimally suitable if it smells bad in the apartment. In addition, the ethers have a positive effect on the state and well-being of a person, improve sleep and mood.

How to prevent the appearance of dampness

• Cleaning with "accurate" means, among which vinegar, mangartan and chlorine. Wipe the furniture and floors with solutions. If there is moisture, wipe the walls. At the end of cleaning, wipe the surfaces and remove the excess water with a dry cloth;
• Do not dry clothes and underwear in the apartment every day. For drying it is better to use a balcony, a loggia or a special mode in a washing machine. If there are no such features, dry things in the room no more than two times a week;
• Poverty glasses accumulate water and increase moisture, especially in winter. Rinse the windows and mirrors regularly, and then wipe the dry cloth or paper;
• For regular ventilation, install special alpine vents that can be safely discovered in the cold season;
• Instead of traditional plastic windows Better install wooden with double-glazed windows. Wooden Rama Environmentally friendly and naturalness, high air permeability, because the tree "breathes";
• Before repairing in the apartment, prone to increased dampness, treat the walls with antifungal agents;
• When repair, give preference to natural construction and finishing materials on a mineral basis. They do not create a greenhouse effect and do not form condensate, regulate the level of moisture and absorb excess moisture. Do not take materials on a latex basis, as they accumulate even greater moisture and have low permeability.

We looked at how to remove the smell of dampness in the apartment and eliminate excess humidity. However, many apartment owners suffer from the opposite problem when the air is too dry.

Insufficient moisture also causes a lot of trouble. In the house in a short time, dust and dirt accumulates, it becomes uncomfortable and uncomfortable, it is difficult to breathe and lack fresh air.

From this article you will learn about the main reasons for dampness in an apartment or house. We also tell me how to eliminate these reasons and restore the normal housing microclimate.

You will learn about the traditional and most modern methods solutions to the problem of air drainage.

When changing the seasons, almost all owners face high humidity due to melting of snow. The scatter of negative phenomena is great: from light discomfort to the "crying" walls and mold. Consider some of the most popular cases and the reasons for the appearance of dampness in residential premises, as well as ways to combat this unpleasant phenomenon.

Any changes to the microclimate have their cause, affecting it, you can change it. The dampness has its own "sources", about which the owner may not know or not give them importance.

Cause No. 1. Bad ventilation

On the device forced ventilation during the repair of the hosts often "forget" from savings, leaning entirely on the windows and doors. In our apartments, the project provides ventilation of two rooms - bathrooms and kitchens. Residential premises have vents, windows and air balconies. Of course, the ventilation lowers the room temperature, blowing the warm (and wet) air, so in the cold period it is rarely resorted to it.

The effect of drainage in the summer is achieved due to the mixing of dry air from the street with saturated pairs internal "waste" air. In transition periods, especially at the beginning of spring, the atmospheric air is saturated with pairs, but it remains cold. Accordingly, the ventilation does not bring due effect.

How to fight

Check the ventilation arranged on the project - the thrust must be tangible. If the kitchen and the bathroom are good, and the dampness is not displayed, there are three options for solving this problem.

1. Forced exhaust ventilation. The device of such a system although certain costs and inconvenience will result in certain costs, it will also decide the problem of dampness forever. The branched extractor has its drawbacks - power consumption, channel system, noise background. The minimum that can be done is to install a fan in the kitchen channel.

2. Installing the recovery. Channel room recuperator of the type "Prana", "Regent" or analogue - a more modern and ergonomic element that solves two problems at once - the extract of wet air and the influx of fresh. Many models have heated to work in winter. Cost of the channel recovery - from 340 to 380 y. e.

Channel recovery "Prana" on video

3. Use air dryer. This device passes through itself air, collecting excess moisture and filtering it. Such a device is very effective - removes dampness from the room for an hour. In this case, the composition of the air remains unchanged. The moisture is collected in a separate container and merges. Filters, ozonizers and flavors can be integrated into the device. The cost of such an instrument for the room is 30-50 square meters. M is from 140 to 220 y. e.

Reason # 2. Moisture Source

In private houses, this is close to the house of septicities or shambo. They impregnate soil with water, water passes under the house, the soil surrounding the foundation or basement becomes raw. Same with atmospheric water flowing on a split scene. Dampness in the basement and in the floor of the 1st floor is provided.

In the apartments it can be:

• flowing roof;
• defect of the drain or sink of the roof, guiding atmospheric water on the wall of the apartment;
• the windy side of the house - the rain is constantly falling on the wall of the apartment;
• constantly current cranes, plumbing;
• a large amount of water on the lower floor - aquariums, swimming pool, sauna;
• evaporation of condensate on the windows (which is assembled due to poor ventilation).

Other trouble-free open sources of moisture in the apartment are difficult, but in each individual case everything is possible.

How to fight

Eliminate source. Fix the roof or drain, transfer septic tank, protect the wall from atmospheric waters. If the reason in the open source should be made waterproofing with liquid composition. Remember that waterproofing is applied by the source of moisture.

Video - where dampness begins in the house

Cause # 3. Intellane

Extreme savings on heating on the principle "Only warm air in the room" is the most common cause of the dampness of the "crying walls" of an apartment or at home. The wall should be a rand in at least half of the thickness. Then the dew point (the place of condensate formation) will come to the side of the street. The wedge wall displays the dew point closer to the warm area, and sometimes at all on the inner plane.

This problem often "works" to the lack of ventilation. Abandoned or low-duct rooms are cheese very quickly - finishing materials are destroyed for 2 seasons, the constructive loses up to 5-6% of the strength annually (in addition to natural wear). It is extremely unwanted to combine heated and unheard (by project) of the room under one roof.

How to fight

Strengthen heating. Try to calculate how damage can get a dwelling from merciless dampness and the amount you will save on heating. Then compare these amounts and conclude. Of course, insulation should be qualitative and timely.

If there is no possibility to increase the temperature, install the fans to the heating devices and provide short-term ventilation - the humidity will be aligned. Do not leave the house with abpense, if you are going to return - find a person who will make it.

Cause No. 4. Incorrect Warming

Thermal insulation of the walls of the walls of cheap and light foam or expensive modern extruded expanded polystyrene has already gained momentum and becomes a welcome event for residents of apartment buildings. Almost no one and never makes the heat engineering calculation of the walls of the apartment to determine the thickness of the insulation. Therefore, when choosing a layer of insufficient thickness, the wall continues to freeze and cooler.

Life in such a "thermos" can spoil dampness in the apartment and inevitable fungus. The reason is the same dew point, which is cozy, located between the panel (wall) and the insulation stove. In addition, the vapor permeability of the voiced materials is close to zero and this is not the only problem of foam. Cheap Materialproduced by handicraft, extremely fuel and toxic when heated. Have this in mind, getting ready to warm the apartment.

Problems with polystyrene fiber on video

How to fight

Study useful articles, forums where engineers and builders are expressed with extensive experience. Understanding the physics of processes will save you not only from dampness, but also from many other troubles. For the insulation of the apartment there are two error-free options:

1. Obviously excess layer of polystyrene insulation. Thickness 100-150 mm guarantees the dew point of the wall outside the wall (in the thickness of the insulation) for any region.
2. Parry permeable insulation. Minvat, Equata, any kind of ventilated facade. This with a guarantee will save from moisture in the walls.

How to warm the walls, look at the video

Dampness in the apartment can provoke the appearance of mold, which, getting into the body, becomes the cause of human virus diseases. In addition, the wet air is not suitable for themselves. Weakness, soreness, spontaneous loss of working capacity - what can happen due to excess moisture in the air. Therefore, the elimination of humidity is taking care not only about the native walls, but also about themselves and expensive people.

Vitaly Dolbinov, RMNT.ru