The photo shows the house, covered. Vinyl siding outdoor looks like a regular board. It can be used for any facade.

Durable, does not lose its appearance for more than twenty years. It can be washed, it withstands the temperature difference from -50 0 s to +50 0 C.

Figure 2.
Siding can be installed horizontally (Figure 1) and vertically (Figure 2). The vertical panels in Russia are disseminated little, and the non-residential premises are so most often.

Figure 3.

Horizontal panels of two types: "Shipboard" and "Christmas tree" (Figure 3).

Metal siding has long appeared on the Russian market. But for a very long time it was used only for finishing industrial facilities. In the private construction, siding began to use relatively recently.

The facade on which is installed, imitates the construction of rounded logs wooden sruba. Figure 4 shows the photo of a single-storey village house, covered with siding.

The varieties of the finishes of the facades of residential buildings can be seen with such siding (see Figures 4-6).

Figure 4.

Figure 5.

Figure 6.

Siding "Log", mounted on the facade of the building, imitates the construction of a rounded log cabin. But, unlike wooden buildingsThe panels do not succumb, do not need to be tinted and in impregnation with various antiseptics.

Figure 7.

It looks very original on the facade of the private building. Siding "Imitation of Bruus" (Figures 7-8). This is a steel coating that is not erased and lit.

Such siding is very popular in the Russian construction market among owners of own private houses, country cottages. Figure 8 - Photo country houseSheathed with metal siding.

Figure 8.

Unlike vinyl, metal siding is not deformed by changing temperatures, is not susceptible to burning, unpretentious in maintenance.

Figure 9.

Relatively recently, a facing base siding under the stone appeared on the Russian construction market.

Due to the spectacular appearance, the diversity of species, ease in the installation and high durability of this material, today this facing siding is in great demand.

The buildings decorated "under the stone" have a very neat and spectacular appearance. The photo shows a beautifully trimmed house (Figure 9).

Such a finishing material perfectly protects at home from the effects of rain, snow, frost, heat, wind. Cutting siding can be searched with walls from any material: bricks, concrete slabs, wooden buildings, salary structures.

Figure 10.

If you look at the photos of houses, covered with basement siding (drawings 9-12), you can make sure that it masks cracks and irregularities, gives the facade of the house a very elegant look.

In addition, the house, whose finish is, is very beautiful, this type of finish protects the base from mechanical damage and, most importantly, protects against moisture exposure, which is destructive for cement-concrete structures.

Congue Siding will last at least about fifty years.

Figure 11.

Figure 12.

Today there are many siding manufacturers, and each of them is ready to offer customers a variety of products, for every taste and any wallet.

If you want to repair your home, give him a unique, original, modern viewThe solution to this task can be siding.

Today it is the most affordable, most convenient, most practical and most durable Material To update the appearance of your home.

He possesses best characteristicswho are needed to create comfort, heat and reliability in your home.

It is frost-resistant and "not afraid of" temperature differences, which are characteristic of our weather, moisture-resistant and does not support burning.

Finishing a private house by siding allows you to insulate it, further increase energy saving and give a prestigious appearance. Siding panels are the most popular decor for the design of the facade of the building.

The article is invited to meet what kind of siding are outdoor decoration And the ways to fasten it.

Siding species and features

There are several types of siding, which differ in the character of the material.

These include:

• Vinyl or PVC Siding (see) - the most common and popular view of modern construction. Polyvinyl chloride is used for its manufacture. There is a large selection of colors and textures of such a material.

Advantages of vinyl siding:

• Low cost compared to other types.
• Restoration of shape with small dents.
• Small panel weight.
• High speed mounting.
• Large selection of colors.

Disadvantages:

• Relatively not a high service life.
• Low shock resistance with direct mechanical exposure.
• Low fireproof degree.

Less common types of material:

• Steel Siding. It is most often used for the facing of industrial buildings, but may come for residential buildings. For its manufacture, hot-rolled galvanized steel with a polymer coating or painted by ordinary paint is taken. The main advantages of metal siding are its manufacturability, simplicity of installation, high strength. The weak property of this material is the appearance of dents and scratches, which causes strengthening siding corrosion.
• Aluminum. It is 3.5 times easier than the usual steel, but heavier than vinyl. In the process of manufacturing, aluminum siding passes complex technological processto which the mechanical and chemical cleaning, Special surface preparation to ensure maximum paint adhesion.
• . A large price of a material that is associated with high processing requirements, and the use of wood rocks growing in tropics does not allow it to be widespread. It looks like a finish, as a rule, is prestigious and very exquisite.
• Chayding. In this case, the panels are made by pressing chips, followed by their impregnation with special solutions, but this material is used only for internal decoration, due to low resistance to moisture.
• Cement or narrow-profile type, manufactured from cellulosic fiber and cement. When finishing residential buildings, it is not used:

1. great weight increases the load on the mounting crate;
2. the complexity of processing.

The positive side of the material is its ingrediation.

Options for finishing houses siding

Tip: When choosing a vinyl siding for finishing them at home, you need to pay attention to the painting of the facial and the back side, it must be uniform. The same requirements are also presented to all types of additional profiles used in the installation.

The photo shows the connecting elements that are needed for.

Featuring the siding panels and other details for their installation are treated:

• Side slice. In this case, the thickness of all elements should be uniform and not exceed 1.5 centimeters. With the thickness drops, or surface irregularities - the panels must be replaced, they are not high-quality.
• Holes for fastening for nails. They must be of the same size with smooth and smooth edges.
• Peelings and signs of bundle are not allowed on the outer surface.
• Regardless of the type of relief on the facial surface, it should be matte.

Tip: For siding, the glossy surface is undesirable, it will absorb more heat, which will greatly warm the panels in the sun.

Some samples of houses of houses siding:

• Finishing siding garden house Under the log - One of the options for designing a building. Its color can be monophonic or with wood pattern.

• Modern house finishes Siding - Fibro-cement materials in the shape of a tile. Such panels are made from cement, synthetic fiber and flushed cellulose, they may have the shape of a board or rack.

By configuration, elements have a view of a rectangle, square and even tiles. In this case, the outer, decorative layer of fibro-cement material is very durable, it is most often covered with ceramics, but it can be: crumb, acrylic, polyurethane.

A large format of panels allows you to perform extraordinarily quickly finishing at home. A decrease in time and labor costs the fulfillment of such a cladding on the facades of high-rise buildings, the price square meter housing will also be lower.

Features of house design siding

Singing panels, depending on their location when installed, are attached vertically or horizontally. For finishing facades of houses, it is mainly used horizontal option.

It should be considered:

• Different manufacturers produce panels with minor constructive differences. For example, in the method of their fixation of each other:

1. in a puzzle, like clapboard;
2. the top edge of the panel is nailed to the wall, and its lower part connects to the previous panel of the latch.

• Panels are mounted on the frame from wooden bar or aluminum profile.
• Without a crate you can do only in the case of a wooden house facing. In this case, the panels can be seeded with nails directly on the wall, but only if they are perfect evenly, which is very rare.

Tip: If there is no need to insulate the house from the facade, the crate can be performed from edged board 100x20 millimeters or a wooden rail cross section of 20x40 millimeters.

• The loves of the belts are screwed up vertically, with a step of elements of 30-40 centimeters. In addition, the corners of the house and the zones around the windows and doors should be frowning by bars. The bottom and upper perimeter also makes a doom.
• In the manufacture of the facade trim, the size of the bars is selected taking into account the thickness of the heat insulating layer, adding a small clearance for ventilation.
• Before mounting the crate, all wooden elements must be treated with an antiseptic.

Tip: Wood service life is much less siding. To avoid dismantling the panels to replace the rotten wooden elements, it is better to perform a frame from an aluminum profile, especially for facades with insulation.

• Installation of metal frame (see) is made on the same profile as the plasterboard - PP 60 * 27.
• For its fixation to the wall of the house, direct suspensions are used. They are mounted from the angle, the step of elements 60 centimeters.

• Siding panels are fixed with galvanized nails with long 50 millimeters with galvanized nails.
• On the frame of the aluminum profile, the material is fastened with stainless steel screws.
• To the elements of the frame, the panel should not be pressed, especially, with. It has the highest thermal expansion coefficient. In this case, 0.5 millimeters clearance should be left, which will prevent panels from deformation during thermal expansion.

The order of the lining house siding

• The installation of panels should be started from the installation of the starting profile, it is fixed by the bottom perimeter of the facing.
• When the profile length is lacking on the entire wall, it is necessary to install the second segment not to join, but leave the gap to one centimeter.
• Waters are installed (see).
• All angular profiles. From the correct installation of these elements, the quality of the entire further process will depend on.

Before separating the house siding, the video will help it to do it right:

• On the perimeter of the wall at the top, the finish plank is installed. The last panel, its top edge, start in the groove of the finish profile.
• Before hanging siding, sows of roofs and visors are facing. In this case, wider panels, sofa, or siding trimming are used.

Docking panels in length, can be performed in two ways:

• Use H-profile.
• Stacking siding panels in a checker order, the nestling at the same time is up to 2.5 centimeters.

How to make a siding window framing

To perform finishing of coil zones, you can use:

• Window planks.
• j-profile.
• Platbands.

The selection of the finish type depends on the design features of the house:

• Upper and lower panels are fixed to wind the window opening.
• The segment interferes with the installation, with holes located on it under fastening elements. However, the panel is fixed! Therefore, the openings are restored by the electric drill, and the oval form.
• Similarly, the framing of the doorway is made.

Design of houses trimmed by siding may be the most different. More details about the options for finishing the house siding will show the video in this article.

Siding - one of the species building materials For cladding walls. With it, you can completely change the external appearance of the private house with some costs, in case the house is still good, but already quite old. In addition, the trim, the siding is used at the outside.

Lost on the insulation, he not only hides it, but also improves the entire exterior of the house. It is for this reason that many household owners are solved on such changes in the appearance of their homes. And it will help all work make it right step-by-step instruction On self-entertainment at home siding.

A bit of history

This type of trim invented our pomper. For hunting needed durable, light ships. It was in shipbuilding that such a type of trimming of ships was applied. Actually, the word siding itself is translated as a shade. Northern peoples adopted this technology to insulate their homes, trimming their homes. In addition to insulation, such technology allowed to accelerate the construction of houses on the northern coast, and was very popular among Russian pioneers.

Nowadays, siding is made from modern building materials:

• Vinyl;
• Metal;
• Cement (fibrotent siding);
• Tree.

Different types of siding make it possible to completely change the appearance of a private house without significant financial costs.

Preparation for the trim

Preparatory work under the scene of the house siding is not very complex. The whole building will need to carefully examine and spend several measurements. If there are visits of a masonry solution, they need to just knock. Sticking nails or drive back or remove at all. Small protrusions, more than 6 mm high, if possible, it is also better to eliminate.

Inspection

When inspecting the house, it is also necessary to identify the irregularities of the walls, the base, corners, window openings and other architectural elements - in general where there is a cladding work by siding. Such measurements are better carried out with the help of a long reference metal rail, cord and roulette. The deviation from the plane is permissible not more than 12 mm. In local places - no more than 6 mm.

Simply put, if the whole wall is not a rectangular shape, but a diamond-shaped diagonal difference due to no more than 12 mm. The same option, but for the window or door - 6 mm.

Common irregularities of the whole wall (fronton, cornice, base) should not exceed 12 mm.
The building over time can occur on one side and tilt. The slope of the wall or the entire building is checked with a plumb. It is allowed to deviate from the vertical of no more than 25 mm. If the slope of the entire building is more permissible, then it is already in a pre-ordinary state. If it is not eliminated, then further work on the sidding siding is simply meaningless.

Preparatory work

After checking the geometry of the building, a complex is required. preparatory work. Removed platbands, plums, lattices, etc. If the slots were found in the walls, near window and doorways - to close or using a mounting foam, or simply cement mortar. If you showed out: the fabulous plaster, paint peeling, plots covered with mold - such sections thoroughly clean. Wooden walls Process with any antiseptic.

Tools and materials

Before starting work on the facing of the house by siding, make sure the complete set of primary instruments:

• Electrical screwdriver and screwdriver;
• Hammer;
• Roulettes (with laser work easier and more convenient);
• Construction level;
• Stairs.

How to cut Doborya

When cladding the building, part of the finishing panels is used entirely. But in some places you will have to do good from the same material. Depending on which material it will be used for cladding, siding clamping is selected and the tool for cutting panels.

For vinyl

• Electric jigsaw with finely cloth;
• Bulgarian;
• Acute knife cutter;
• Universal;
• Hoven for metal;
• Shoe knife.

Metal:

• hoven for metal;
• scissors for metal;
• disk electric saw with teeth from winning.

Tip! The use of a corner-glare machine (grinder) is accompanied by heating metal siding at the place of the cut, with damage to the protective upper layer.

Material

If there is a desire to perform all work on the trim yourself, in order to purchase the whole required Material You can just contact a large construction store. The seller is just enough to describe in detail which area of \u200b\u200bthe walls, the number of windows and doors, etc., and it will calculate and select the desired set of material for work.

And in order to control the quality of the goods, it is necessary to know what grounds must match the material for the skin of the house by siding:

1. The same thickness over the entire panel.
2. Mandatory presence of special labeling on the inside of the panel. This marking carries all the necessary information on the material: color, party number, release date. If the material for the plating during the work is not enough, it can always be purchased, focusing on this label.
3. On high-quality panels there is an antiuragic castle. It is made in the form of bend on top of the panel and is located above the holes for fasteners.
4. A faithful sign that the firm takes care of its image is the presence of a complete element and accessories with materials.
5. Certificates and warranty obligations must be presented to all products. The minimum warranty period for the coating should be 50 years.
6. Responsible sellers will definitely attach the instructions for the installation of siding to the purchased product.

Installation of crates

First mark the markup. On the walls of the house there are straight lines, so that it turned out a closed outline. To the line turned horizontal, helps the horizontal level. At the corners of the house from the horizontal line, it is necessary to make a mechanical routing, to reveal the minimum distance to the base. When the minimum distance is installed at this level, the twine for the contour is tensioned. A starting plank will be mounted on it.

The next stage is the installation of elements of vertical metal guides from the mounting horizon, starting with the angles. The distance between the vertical planks is 35-45 cm. Near windows, doors, additional guides are made. The main condition - they should not intersect anywhere.

This is necessary in order to under the siding constantly circulated air, preventing the appearance of mold.
For walls of brick and concrete, guides are performed from a special profile. For log walls, rails with a cross section of 60x40 mm treated with antiseptic solution are used.

Waterproofing and insulation

If the installation of the crate is made on wooden and fuel-concrete walls, the waterproofing is required.

The insulation of the walls of the Ministry of Health is performed at the request of the host of the house, but the vagation-proof membrane should be installed anyway. If there is no insulation, the film is attached to the wall of the house. If there is a layer of insulation, the waterproofing layer is attached over it. Since the clearance for ventilation between the panels of the insulation and siding is required, the dry tank is constructed on top of the insulation layer.

Guides

Now that there is a heater and a doomer is ready, it comes time for mounting siding accessories, such as:

• external and internal elements on the corners of the structure;
• slats on windows and doors;
• films on the base of the building and windows.

The base waterproof is fixed according to the planned level under the bottom of the siding so that the upper edge takes place along the line. Corner elements Must hard on the self-tapping screw at the very top of the extreme hole. The subsequent screws are twisted in the middle of a slot step 50 cm.

Tip! If the profile is not enough, it can be increasing to others, braziness with the previous one with overlapping in five centimeters.

The windows framing begins with low tide mounting. It protrudes beyond the window opening by 8-10 cm on both sides. Side coil strips are installed on this protrusion. On the bottom, the j-profile is held. After mounting siding, the window design is completed by installing platbands.

The process of edging the doorway is almost similar to the window.

Installing panels

The process of installing siding panels is similar to the LEGO designer. Each element is connected to another in turn. The first row from the bottom is attached to the first (starting) bar with a slight pressure before clicking the bottom. Top through the slots are fastened with self-draws in the center, so that siding moves into them without visible effort. The mount is conducted from the center to the edges of the building, a step of 40 cm.

All subsequent panels are attached in the same way, rising from the foundation to the roof. The top row ends with the finish plank.

Basic Rules of Montaja

1. It is mandatory to avoid hard fastening of siding panels. It should be remembered that the material itself has a property to shrink on the frost and expand in summer. Therefore, the screw is screwed into the center of the hole so that there is a clearance of 1 mm between the screw and the plate.
2. Observe the gap of 10 mm between the planks and guides. It will protect siding from damage when expanding in hot weather.
3. Conditioning at home by siding can be done in any weather, but it should be taken into account that in the cold the material becomes fragile and therefore requires more careful handling when installing.

Watch the video:

I have the following problem. House old builderAnd just need to insulate the corner room, in the winter there is cold, raw and on the walls of the mold goes. There is not enough money for the facing of the whole house, so they decided to start from this place. This is an extension, and not very high quality. Deviation from the plane, about 20 mm. While we decided that the horizontal facing will show all the flaws, and the vertical will hide, but if it is doubted.

The question arose before the winter to see the house siding. Since it is not a builder himself, I encountered it for the first time. I reread a bunch of different tips, sites that tell what and how to do. But so that someone specifically laid everything on the shelves, never found. I came across this article. I read and everything understood very carefully. What, how to do and that you need. As a result, I bought a beige metal and triumph and started working. Since there was a vacation made with a friend all quickly. It is good that the house has a recent building, so all the corners and walls are smooth. There was practically no difficulty. As a result - a satisfied wife and beautiful house. Thanks for the article, it turned out to be very useful.

Reading time ≈ 4 minutes

One of the most economical ways to give the facade of the house of an attractive look is to finish the house siding with their own hands. In addition, this product is very easy to install. It is enough to have everything for this. required tools and materials, as well as desire.

The advantage of finishing siding with the attraction of workers is that they will be able to accurately calculate the amount of materials and help you choose the highest quality of them. It is for this that you need to use the services of specialists. But to complete the finish at home by siding can be completely and with your own hands, and how to do it, look in our article with photos and videos.

In order for siding to serve for a long time, it should be correctly made its installation with your own hands. The following recommendations will help you handle it:

• The panels should not be mounted tight to the crate, as siding, like other facing materials, is inclined to compression and expansion under the influence of temperature. In the process of work, you should leave a gap of about two millimeters;
• If products are connected using accessories or superimposed on each other, the gap for temperature extensions should exceed 6 ml;
• It is possible to cut the material at a temperature of not more than -10 °;
• The finish of the house siding provides for the use of short galvanized screws as fasteners. They must have a rounded head, and at the end there should not be a bora. It is also permissible to use tolseri nails;
• It is necessary to arrange the fasteners in the middle of the slot;
• No need to cut the product in advance. It is best to do so as it work.

Schemes and drawings

Cutting device

With the help of the crate, you can organize the system of the ventilated facade. The shade for the siding device can be metallic or wooden. Depending on the type facing materialIt is suitable vertically or horizontally.

Sayding Mounting Tools

Significantly facilitates the work of the application of the bunch of notches and perforator. In addition to them, the following tools will be required:

• Scissors and Hacksaw for Metal
• Screwdriver
• Two-meter construction level
• Special Pencil for Marking
• Roulette with a length of at least eight meters
• Carbon black
• Construction rope.

Step-by-step instructions for finishing at home siding do it yourself

Standing at home Siding can be performed using a special H-rail, which is specifically designed for these purposes.

This method provides for the device edges of the panels in the product grooves. This eliminates the need for dospene panels over a flat line. It is best to select rails under the color of siding so that they do not stand out.

Before installing the rail, it is necessary to fix drain staps at the bottom of the wall. They need to arrange starting rails that will be the basis for fastening the first siding panel.

When fixing, initially fasten the upper lock of the singing row with the lower lock of the next and attach to the crate. Only after the installation of the finish n-rail can you mount the last range of products and it is not necessary to fix them. It is worth knowing that the decoration of siding provides its indentation from external and inner corners. The gap should be at least ten millimeters.

It is also necessary to make the trim and for the coating of the roof. To do this, you can take the remnants of the material. You can use special panels with perforation. This procedure allows us to provide a natural space under the roof.

The finish of the house siding is quite easy to perform with their own hands, but it is better to get an assistant. Recommended when buying a material for finishing the facade to additionally take from the seller instructions on the device in which these all processes needed to be executed.

Facing the facade of the house is one of the main components of not only external attractiveness, but also reliable protection external walls From the adverse effects of natural factors: rain, snow, sunlight. In addition to protective functions, the house cladding creates good thermal insulation premises.

Today, in the construction market you can find many options for facing the facade. One of the popular types of finishes is siding. The finish of the facade siding does not require special training, skills and skills. Responsible approach right choice material, clear observance of installation technology, resulting in high-quality finish The facade will be provided.

Syding panels varieties

Before you begin to cover the facade of the house, you need to get acquainted with the varieties of siding panels and explore the characteristics of the material from which they are made.

Steel

Steel siding, applied to cladding industrial and warehouse buildings.

Advantages:

• a large selection of colors and shades;
• stability to deformities;
• durability;
• do not fuel.

Disadvantages:

• periodically requires the coating of the anti-corrosion composition;
• dents from mechanical damage remain;
• a large mass increases the burden on the foundation of the building, which must be taken into account during the construction of the house;
• high price.

Aluminum siding is used to cover industrial and residential buildings.

Advantages:

• lightweight, durable and durable material;
• does not fade in the sun;
• a huge selection of colors;
• acceptable price.

Disadvantages:

• subjected to corrosion;
• possible deformations from strong mechanical impact.

Siding wooden is used mainly for the inner lining of residential and office space.

Advantages:

• aesthetic appearance;
• well keeps warm.

Disadvantages:

• dISTRIBUTY;
• high price;
• it needs permanent impregnation with special compositions to increase service life.

Cement

Cement siding is newest technology Testing facade building. Cellulose fibers are added to the usual cement, so it turns out the lining of the resemblance to expensive trees. Special Pressing Technology Allows you to make this type of siding with any pattern. It is used to cover industrial facilities. For residential premises is used in rare cases.

Advantages:

• a huge selection of color scheme;
• not fuel;
• durable and durable.

Disadvantages:

• high weight that will create an excess load on the foundation;
• complexity of material processing;
• the cover of the facade will require not only special training, but also use the means of protecting the respiratory organs (respirators);
• high price.

Vinyl siding, one of the most applied finish types. The material looks spectacular and expensive, as I simulate a lot of textures: dear trees, stone, marble. You can also pick up various colors and make an original pattern or picture.

Advantages:

• simplicity and ease of installation;
• reasonable value;
• reliability, durability (more than 20 years);
• ease of material;
• a huge selection of texture and colors;
• you can see any type of surface;
• the ability to replace multiple panels;
• you can handle various detergent mixtures.

Disadvantages:

• vinyl panels do not withstand strong blows and can give a crack.

The facade covering siding from Vinyl is the best solution for finishing the facade of the house. It is desirable that the facing of the facade was engaged in a specialized brigade. Bad panels will pass the air, moisture and insects to the wall of the house, and it threatens it with damage. It is possible to see the facade with your own hands, for this it is necessary to prepare tools and materials that will help in work, as well as familiarize yourself with the instructions.

Tools and materials

Required tool:

• measures for measurements (ruler, carbon, roulette);
• a hammer;
• rope;
• screwdriver;
• ladder;
• saw electric for cutting panels.

Material:

• outdoor and inner corner;
• window Planck;
• N and j-profiles;
• start and drain bar;
• sophytes.

Stages of finishing facade

Before siding to see the facade, it is necessary to clearly follow the installation technologies, which consists of several stages.

Counts

• square of the walls of the house (cottage);
• wall dimensions;
• sizes and number of window openings;
• type of roofing country house.

Having all the data for the calculation, you can independently calculate the required number of facing panels using the following algorithm: from the area of \u200b\u200ball the walls of the house, to take away the area of \u200b\u200bdoors and windows, the resulting number to divide the area of \u200b\u200bone siding panel. The resulting result is multiplied by 1.10. Thus, the area of \u200b\u200bpanels with a 10% reserve is calculated.

Preparation

Prepare the surface of the walls. Clean their pollution, remove extra items (pipes, platbands, window sills, etc.). The cracks blew the mounting foam or close with cement mortar. If the surface is wooden, then process it with a special mixture (antiseptic).

Okeekhet

If the house is new, then the dog does not need. Provided that the old house must prepare a crate for fastening panels. For crates use a tree or metal. Wooden doom cheaper than metallic. But the metal doomle is more reliable and durable. Rakes are suitable for a wooden crates that are previously treated with an antiseptic. The iron doome is made of galvanized profile.

Warming and waterproofing

The next step is insulation and waterproofing. Polyfoam can be used as insulation. For waterproofing - membrane. The first layer is placed insulation, the second - membrane, and then make a new crate.

Installation

1. Siding is mounted with a gap between the end panels and corners of 6-8 mm. There is also a clearance of about 2 mm between panels and the crate, to prevent siding strain.
2. Before mounting a new panel, it is connected to the panel attached to the crate. An outer corner should close the locations of the panels.
3. Fasten the planks of window openings and J-profiles including in doorway. Corners of profiles to lay mustache.
4. Install a n-profile in a vertical position, leaving the gap of 3-5 mm at the top and bottom.
5. Under the roof of the building, consolidate the finish bar.
6. The first row of siding is attached to the starting bar, and is strengthened with a self-tapping screw at the top and in the middle at a distance of 35-45 cm. Installation of the following series occurs in the same way.

The technological process of siding installation does not represent a special complexity, so it can be done with your own hands.

Video

Detailed description of siding mounting stages:

Schemes

Proper installation schemes: