We all often catch yourself on what you want something new in the usual interior of the house. Usually on the surface lies the simplest way - rearrangement of furniture. But she does not always give the desired result. And then the idea comes to mind: you need to change the furniture itself, and not its location in the room.

But can we often afford to throw old things and buy new? Moreover, many furniture items may not be able to family budget.

We know a much more economical and easy way to change and refresh the interior of your dwelling. It is painting old furniture.

Necessary materials and tools

Frequently loved furniture of the Soviet sample is made so qualitatively, which can be stopped for a long year, which you can not say about modern models. In addition, the vintage vintage interior items are now in fashion, more than ever. Therefore, by painting it - the optimal solution.

How to paint the furniture without noise and dust, and do not turn an apartment into the object of painting production, missing toxic means? To do this, we need to stock the necessary tools and materials.

For painting work you need:

• The piece of furniture in need of painting;
• Painting tape;
• Gloves;
• Paint;
• Roller and tassels;
• Paint tray.

Before proceeding with painting, the furniture surface must be prepared. This requires:

• Putty;
• Roller and tassels;
• Paint tray;
• Gloves;
• Protective glasses;
• Paper emery shallow grain;
• Rubber spatula;
• Grinders or wooden bar.

After preparing everything you need, you can proceed to work. Before painting furniture, it needs to be prepared to avoid further errors.

How to prepare furniture for painting

Proper surface preparation will provide high-quality painting that will shine in the sun and delight the eyes.

1. First, carefully inspect the furniture that you are going to restore, on the subject of small breakdowns. If necessary, repaired or replace the installed mechanisms :. Exfoliated particles of old varnish need to be removed. Remove the doors, get the boxes and unscrew the handles and locks outside.
2. Skill surface (both glossy and matte) fine-grained sandpaper. It is such a skin that will not leave deep scratches, which will be difficult to close the primer or paint. For greater amenities you can use grinding.
3. First you need to cover the surface of the furniture of the primer, and after, with the help of spatlets, close problem areas. This will provide a good clutch of materials. Declaring the surface with vodka or alcohol - they do not leave slippery film.
4. Apply so that it impregnate any small damage, scratches, cracks. To do this, it is better to use a brush. Wait for complete drying.
5. Using a rubber spatula, apply a spatle to the defects of the furniture and thoroughly squeeze.
6. After the putty can dry, skill the places that you applied it. It is necessary to do it with the help of a grinding machine or fine-grained emery paper stretched on the bar. Depending on how deeply defects were and what a layer of the putty, you were applied, this operation may need to repeat several times.
7. When these works are finished, get rid of dust on the surface and stubble.

Tip: Buying primer, try to choose a shade, as close as possible to the color in which you want to see your furniture. This will not only provide a smooth color, but also will save on the paint.

What paint paint furniture?

Lucky, which are now used during painting, are the following types:

• Alcohol;
• Epoxy;
• Alkyd;
• Nitrocellulosic;
• Oil;
• Polyurethane.

Varnish, in contrast to paint, creates a surface with higher hardness and resistance. But if you decide what paint paint furniture, then make a choice from the range below.

• 1. Among paints for processing furniture are traditionally used acrylic. They are stable others, quickly dry, easy to use, and well suited for a kitchen or children's room. In addition, acrylic paints They have a less pronounced odor and easily bred by water, which allows you to save material.
  2. Acrylic paints in the canopy will be much simplified and will make you work easier. Such paint falls on the surface easily and smoothly, and dries faster than the usual, applied with a brush or roller.
  3. Enamel varnish paints, applied to the tree, give the surface of the shine and gloss. If you want a matte effect, then oil paints will help you.
  4. Save genuine to help transparent paints. The range of gamma is very large, and the consistency allows you to mix different shades with each other so that you always have a choice to paint furniture in what color.

Coloring furniture with your own hands (on the example of a wooden kitchen cabinet)

You probably have a house that you would like to update. Most often it is kitchen cabinets, since they are especially affected by moisture and mechanical impacts.

Let's try on the example of such kitchen cabinet spend painting own handsAnd you make sure to paint the old furniture is actually quite enough at home.

Please note: if you buy kitchen cabinets without finishing, then most likely it will be furniture from birch. Such wood has a fine-grained structure, and it looks great on it. For example, applying a cherry moron, you can easily achieve the colors of the cherry.

1 Stage: Oktrinate Tree. This is an important stage of preparation. Take sandpaper with grain grain 120 and easy to grind wood in the direction of the texture, so as not to scratch the surface. With the help of an emery with a grit 220, spend another grinding to remove all small scratches and make the surface smooth.

Stage 2: Apply impregnation on wood. Before that thoroughly wipe dust from the surface. The applied impregnation layer performs the role of sealant and contributes to more uniform staining. Give the impregnation to dry completely.

3 Stage: We apply a veil. It is better to put it with a brush, circular motions so that the tool is rubbed into the wood texture. Final passage in the direction of wood texture so that the final coating is smooth.

How to paint old furniture?

You probably have a lot of old furniture, which is sorry to throw out, and have nowhere. She dust in the country, in the garage, in Saraj. And many items of such furniture are a very convenient, lightweight and inexpensive material. Give them new life You can, just paint into another color and refreshing the coating. In addition, the reconstruction by painting will significantly strengthen the surface, which is subject to various damage due to its technical characteristics.

Before painting furniture from chipboard, it needs to be carefully prepared. There are two ways to clean the surface:

1. Chemical method. It implies the use of special chemicals To remove an old coating. You need to choose this tool depending on the type of coverage. Be sure to use gloves when working.
2. Thermal method. In this case, the processing is carried out with hot air or steam. This will require a construction hairdryer. Send it to the surface and hold while the layer of paint or varnish will not soften so that it is easy to remove the scraper.

After cleaning, the surface you need to be covered and wagged out.

For painting old furniture from the chipboard, it is easiest to use in the canopy. You will cope faster, and the layer on the surface will be smooth and smooth. Also an excellent option can be oil or alkyd paints.

Tip: If you use brushes when painting furniture, then buy new ones. Pay attention to how the bristles hold firmly. If the hairs start falling during operation, it will very badly affect the quality of the coating.

Interesting interior solutions (in what color to paint furniture)

As you know, old furniture is painted not only in order to upgrade, but also to match the interior. Fashion trends in the design of housing can be well combined even with the old Soviet wall, if it work a little over it.

Such a wall is enough to repaint, taking advantage of the manual in our article, and play with the location of its elements.

The most important thing is to decide in advance, in which style it will be resistant. And even the classic Romanian wall of the 80s, long-bored and non-mode, can be turned into a multi-level, full-featured part of the room, and not just a piece of furniture.

On the photos below you can see examples of how can be arranged old wallSo that it corresponds to new fashionable movements in design. Pay attention to how the new color of the furniture and its fittings harmonizes with the color of the walls in the room.

Here you see the old wall, which was repainted in another color:

And here - options for solutions, how to rearrange the walls of the walls:

These photos will help you decide which you want to see your updated furniture.

In painting of furniture, as in any work, there are their secrets. They will not only help you quickly cope with the process, but also save funds, as well as provide perfect performance.

1. Choose materials (primer, putty, varnish, paint) from one manufacturer. In this case, they will be guaranteed compatible with each other. Most often, the manufacturer develops, in accordance with the operating conditions. So you will be easier to choose the optimal material.
2. Do not be afraid to play with color gamut. Properly chosen colors will help visually increase the space. The contrast between the colors of furniture and walls will create a unique style in a room in any direction.
3. Before starting work, be sure to rob in a roller and several brushes of different thickness. With the help of the roller it is more convenient to paint wide surfaces, and the brushes will be needed for painting the ends of the details of furniture and finishing fittings.
4. Use. It will help you to protect your paint and dried surfaces. In such cases, the solvent is not very convenient - it will damage the paint layer. A painting tape will relieve you from such mistakes.
5. When painting work, use the respirator mask or thoroughly carry out the room! Although most modern paint materials are non-toxic and do not emit sharp odors, the precaution is not excess.

Video about painting furniture

We hope that this article will be useful for you when you decide to update your furniture as simple as painting. As you can see, thus you can completely transform the entire house, and not just a closet or wall.

If you have any questions, please ask them in the comments. We will gladly answer you. Surely many of our readers have experience in such work. Share it with us, tell us about the features of the process, with what difficulties you faced and how they solved them. Good luck to you in your work and comfort to your home!

In any residential room, we can find a mass of furniture, which is the most important component of any interior. Depending on the purpose of the room, here we can meet a variety of chairs, tables, sofas, chairs and cabinets. This furniture is always in plain sight and therefore, in addition to its basic functions, it should also have an attractive view that will decorate the interior of your room. Any thing with time is wearing that is why it is necessary to constantly repair and update your furniture. To update appearance Furniture sometimes paint it enough. This option is most cost-effective and simple. At the same time, everyone who wondered about painting with their own hands, the same cabinet from the chipboard, a reasoned question arose: how to paint the closet?

Cabinet painting is a great way to return to him the second youth

First of all, it is important to notice that the painting of the cabinet is the most profitable and good decision. So, you can upgrade and embellish your interior without special costs. It is possible in case your old cabinet It has high-quality assembly and durable materials.

Painting Cabinet Preparation

We assure you, any old and cramped cabinet from the chipboard can shine again. Therefore, you do not need to throw it right there, it just needs to be repainted. This is due to the fact that, as a rule, old furniture Has higher quality. It uses natural materials, and therefore such a closet has high reliability and durability. The same, we can say about another element of the interior, as a chest of drawers or an end. Painting of these elements is carried out by the example of the cabinet, as well as separately described in the article on.

It should be noted that it does not matter much and the material from which the cabinet is made. Of course, here we will find some features, but you can refresh both a wooden closet and a wardrobe of chipboard. If we talk about differences, the cabinet from the chipboard absorbs less moisture than the wooden cabinet. That is why the chipboard will dry longer. The chipboard is much easier to withdraw the color you need also need to use a smaller primer layer than for wooden products.

During the preparation of the closet to paint, we need to remove all removable items that are presented in the form of pens, loops, drawers and doors. We must get a clean cabinet frame.

All work on training and painting, we should be carried out in a well-ventilated place, and best, to do it on the street.

For preparatory stage Painting, you will need the following:

• sandpaper with different graininess;
• flat brush;
• sponge or rag.

First of all, we take a sponge or a rag and remove all dust and dirt from the closet surface. After that, proceed to remove balance old paint. And varnish. Old paint layer We remove using sandpaper. This is done with swallowed circular movements. Stripping is performed first with coarse sandpaper. It is necessary to completely clean the cabinet from all irregularities of varnishes and paints. This will allow the new paint to lie on it a smooth and smooth layer.

For stripping from old layers of paint, a coarse-grained sandpaper is perfect.

It is important that while you are draining the surface, you did not erase a layer of veneer. Otherwise, you will still have to pelt the surface from irregularities and holes. Therefore, do not overdo it with the grout.

After the closet surface is treated with coarse sandpaper, you should choose a plane from dust using a flat brush. In no case do not clean the cabinet or dresser with a rag. So, you will not be able to get rid of all the dust, and also risk scolding her residues into the surface, which will later affect the quality of the painting of the cabinet.

Then, those places that were not treated with coarse sandpaper, we begin to process, using already paper with smaller grains. After that, we again circle a wardrobe or a chest of drawers, to remove dust.

After the stripping stage of the cabinet is completed, you should surely wash the room in which you work so that at the time of painting, the room is clean and not dusty. A dusty room can negatively affect the quality of painting.

What should be used paint

If we talk about the form of paint, it is best to give preference to acrylic paints. Such paint has a bright color practically does not smell and it is quite simple to dilute with water to get the desired color. Plus, in addition, such a paint is quite simply washed, which allows you to correct the errors in painting. After drying, the water evaporates, and the paint acquires stronger properties. This moment should be taken into account during the application of several layers.

Optional to paint your wardrobe or dresser in one color. Here you can experiment a little. Taking, for example, two colors. For example, take a beige color for the base and brighter for details. If you can't find the color you need or shade, you can also buy a regular white acrylic paint, then add a kel into it. So, you can get the desired color and shade. While choosing a shade, you can check how it looks, applying it to small plot Cabinet. So, you define what color is best for you, and determine its saturation.

Acrylic paint is best suited for painting the closet

The process of primer

Many are asked about the need of primer, and we can fully say that if you want to qualitatively paint the closet or chest of drawers with your own hands, then you will certainly be braced surface. This is due to the fact that the primer will not give the surface of the cabinet to absorb moisture. This will contribute to a better drying. Also with the primer you will not lose the desired color for you, since when applied to the paint on the unnecessary surface, it will not matter this chipboard or ordinary tree. During drying, the color changes slightly, as its part will be absorbed into the material.

If we talk about the most suitable primer, it is best to use the primer on acrylic basis. This is due to the fact that the components of such a primer will be remarkably interacting with the acrylic paint chosen.

Processing the surface of acrylic primer is quite simple. You should, first of all, familiarize yourself with the instructions for using this material. An important point is to take into account the drying time of the soil. Before applying to the chest of drawers or wardrobe, you need to give the primer to dry completely. It is also important to conduct clear calculations of the surface that you decide to process. So, you can purchase the amount of material you need.

Printing chest of drawers or wardrobe is necessary using a roller, relatively thin layer. Then leave for the time our chest or cabinet, for its complete drying.

Before painting, the surface must be projected

Fixtures for painting

Tools are another important question that occurs from everyone who decided to paint the chest or cabinet with their own hands. What is better to paint the cabinet, brush or roller? Of course, here you must consider your preferences and skills, but we, nevertheless, we recommend using a brush. This tool is more reliable and practical. With the help of the brush, you can put paint with a smooth, uniform layer over the entire surface. Plus, besides, the brush will be excellent helpers in painting of hard-to-reach places.

Going into the construction store, you can find a huge selection of different brushes and rollers. The choice of tools is the same an important pointlike the selection of paint. Only high-quality brushes and rollers should be bought. Otherwise, patches may remain on the surface of the surface, which fall out of the brush with low quality.

Prayer cabinet

The process of painting, we need to be carried out in a well ventilated, clean room or on the street.

We should apply the first layer, the color of which is brighter than the selected tone. The paint should be liquid if it starts to stick, dilute it with water.

The surface color may be different, depending on how much layers were applied. When applying one thin layer, we get the lumen of the tree structure, which is very suitable for the style of Provence.

To get a thicker layer, the paint should be applied several times. Each layer should be applied after the previous will dry completely. The smears should be applied in only one direction, so you get a uniform color and a pleasant structure.

If you use two and more colors, then we recommend the boundaries between them. It will be able to help you not mix colors.

A few days later, after complete drying, a thin layer of transparent matte varnish is applied to the closet or chest. It is designed to protect the stained surface from damage. After the lacquer is dry, you can back to attach all the details to it that were previously removed.

As you can see, paint the cabinet with your own hands is not so difficult. So you can convert the old cabinet or chest of drawers to fashionable and original element Interior, including his fantasy and attaching a little effort.

Many of us are asked about whether it is possible to paint furniture under ancient. After all, most citizens have an unnecessary wardrobe or chest, which is sorry to throw out, but also do not want to leave, because it looks frankly inappropriate in the apartment.

Cabinet painting

If you want to rejuvenate the situation, but do not know how to paint the old cabinet with your own hands, we will give step-by-step instructions for all upcoming operations.

IN general features Upcoming work is reduced to the following:

1. Remove from furniture, handles and other fittings, clean the drawers, mirrors, hooks, etc.

1. Then we disassemble the wardrobe itself, if possible, until the reason.
2. And finally, painting the cabinet.

Preparation

Let's understand in detail how to repaint an old lacquered wardrobe.

The first thing to do is carefully inspect it.

• If there was an old varnish layer on its surface, then the polishing can be eliminated by either a special solution or acetone or turpentine, observing all precautions.

• If the furniture was painted before, then we proceed the surface with sandpaper until a wooden base appears. This, of course, is a rather painstaking and labor-intensive process. Processing the tree is very careful, so as not to disturb its fibers and the structure.
• With an unpainted wardrobe, everything is much easier - remove the sandwicp on which fat and dirt have accumulated over the years. If the surface was very sampled, it can be rinsed with simply soapy. If there were cracks on the furniture, then they are desirable to smelting out with a putty with. And after drying to handle the sandpaper.

If you want to transform the interior in classic style, for this you need to know how to paint the wardrobe under the antique:

• You can use special chalk paints. They have a large palette of shades of both blurry and burnt.
• You can recommend the brand "AUTENTICO" or "ANNISLOAN". If you do not work, you can experiment with conventional paints on water basedFor example, for.

Paint "Annisloan" under the old

Build cabinet

We offer you to apply the so-called "aged" - the deliberate emphasis on the "antiquity" of the subject, intentional underlining the duration of its use. Why do you "comprise" and so old thing?

If the old cabinet is simply painted, then it turns out a completely unlimited freshly dried old furniture object, the place which is in the garage or on the balcony. But the stylish rarity, from whom antiquity, can become a genuine interior decoration.

Council. We use only matte shades.
Glossa will not suit the effect of antiquity.

Before the start of "making" the surface with a special primer (primer). It will prevent wood penetration on the finished surface, and also contributes to good adhesion of paint and wooden base.

An important role is played and how to paint the old cabinet - it is due to the tool.

You can paint the surface:

• Tassel. Try to choose good and high-quality tassels, it is advisable to buy brushes of different sizes.
• Roller
• Porolone
• Aerosol

Painting an old cabinet with their hands process time consuming, but you can get complete satisfaction, seeing the final result of your work.

Below - detailed instructions, How can I do that.

• It is better to start painting from an invisible side of the cabinet to slightly fill the hand and feel how much paints on a roller or brush, and maybe change a little shade of paint if it doesn't like it (it is possible to combine colors, for example, to allocate some decorative parts Another color).
• Then you can move to the front wall of the cabinet, where everything will be seen by the naked eye. The second layer, if necessary, is applied after complete drying of the first layer. Drying time depends on many factors and is about two or three hours.

Stain and protect the surface

"Action" can be made in several ways:

1. The first way it is called "Trimming or Flashing". It is as follows. We apply paint, let dry, then three sandpaper in places where the wear of the furniture is characteristic, for example, on corners or handles, etc. You can rub to the primer or to the tree itself.
2. The second method is called the "Effect of Amplification of Old Paint". Here you will need to paint the product in two layers. We apply a dry brush paint of another color in the right places. We make it easy, almost air, movements. Called this technique "dry brush".

1. Another one of the techniques under the antique is called the "effect of the surface contaminated from the surface." What to achieve such an effect, unevenly applies to dark wax in places where furniture relate to man's hands.

1. A good and original reception is "the effect of several layers of paint, applied to each other." For example, let's apply green paint to the purified and primed surface. The next layer can be applied or bronze or gold. And, for example, the final layer can also be applied green.

After drying the paint, take the coarse sandpaper and wipe the closet surface. One paint should stick through the other. Then work with smaller sandpaper.

Having obtained a certain result, apply a thin layer of bleached, diluted with water to the surface. Then cover the crockel varnish composition. Now you can admire the result and make a photon memory. And watching the video in this article, you can learn something interesting for yourself.

Protection Coating

1. We protect paint with special wax for wood.
   Usually it is sold two species - dark or transparent.

• We apply it to an ordinary pure cloth or a foam sponge. Try, and we are waiting for fifteen minutes before drying.
• The transparent wax does not change the colors of the product, but the dark falls into the in-depth places, pits, cuts and give the inimitable effect of antiquity.
• If the entire surface is covered with dark wax instead of transparent, then the cabinet will take a less dark tint.

Tip: Wax coating requires applying matte acrylic varnish for.
Such an update varnish can be carried out once every six months.

Conclusion

Now you know how to paint the old cabinet with your own hands. The main thing is to want! And the new direction with which you met is called an apseklinging reconstruction of old things. The price for such beauty can vary, it all depends on which material was used during restoration.

Each house there finds furniture facilities in the interior of the room. Wherever she stands, whatever it was - a wardrobe, a chair, a table, a mild corner, it is worth it from everyone. In addition to the main purpose, furniture should have a pleasant look, and it can serve as a room decoration.

Metamorphosis B. white color - This is a great way to extend the service life to old interior items.

Unfortunately, it does not happen so that the favorite piece of furniture for a long time remained as if he was brought from the store. After time, any thing loses its former attractiveness, ages. It is necessary to regularly repair and reconstruct furniture. The wardrobe from the chipboard turned into a rhylad, it could not become a pretext to be taken to the landfill. It can be easily updated without difficulty, it is worth painting. For good care Old furniture will last long-year-long years, because it is much stronger than modern.

Yes, and the budget will not suffer, as spending will be insignificant if you bought a new wardrobe.

The one who decided to paint furniture independently, probably thought about how to do it. Interior items made from chipboard absorb moisture to a lesser extent than wooden. So that they dry, it will take a long time.

The chipboard will need less primer than wood.

So what to paint the closet? What kind of paint apply? Best option It will be the use of alkyd or acrylic water-based paint. She has many advantages - it has a juicy touch, odorless, which has great importanceWhen you work indoors, it is easy to divorce water. It is easy enough to rinse to fix inaccuracies during painting. Work with her - pleasure. As soon as the paint is driving, it will become stronger. Remember this when you apply layers. Also fit the usual paint on wood or aerosol.

There is a wide variety of acrylic paints with metallic effect or pearl.

To thoroughly make painting, use varnishes. They will give furniture the effect of antiquity. She will look great. The plane needs to be painted in several layers, pre-give dry each layer. This is not the only property.

Lucky promote color fixation and protect from minor defects.

You can paint the wardrobe in different colors, for example, a bright base and multicolored parts. For the desired color in a white paint, add tone. When making a children's room, use all the fiction. Deciding which tint is needed, apply paint on a small area of \u200b\u200bfurniture, so you will understand what color paint will need, what is its brightness.

Each manufacturer releases the appropriate primer for its paint, and use it best to use this soil.

Necessary materials and tools

Before you start painting, you need to stockday required materials: Scotch construction; Napkins or rags or sponges; sandpaper of various graining to remove the former layer of paint; means for degreasing; primer; putty (quite suitable automotive); Solvent or White Spirit - will allow remove the remains of the former paint; glue; paint; varnish; Gloves, for painting it is better to take rubber.

Materials and tools for work.

From the tools you will need: stationery and carpentry knives; Hair dryer to dry the painted surface; Flat brush - it is better not to save on tassels, buy quality so that there are no villi on the surface; roller; putty knife; screwdrivers; a hammer; nails; drill.

From furniture you need to remove accessories, remove the shelves, remove the doors. Then proceed to work.

Get cracked

The appearance of cracks on the objects of furniture from the chipboard, as a rule, contributes to the entry of moisture, they are also formed due to the effects of heat or frequent opening and closing doors, without their hold, flaking doors. You can independently remove this defect without resorting to assistance.

It will require a syringe with a needle, clamps, PVA glue.

Fill the syringe with PVA glue, we put on the needle. The whole range of cracks fill with glue. At the plane we attach the clamp from the side where the crack appeared, and we are tightened. Excess glue we clean the napkin. We leave for a day or two. After the expiration, we continue restoration work.

You can get rid of cracks with a putty.

We apply a mixture on a plane with a spatula in two layers. The first layer is distributed equally on the surface. We are waiting for when driving, we will apply the second layer of putty, we also give me to dry.

Create a rough surface

Before painting, you need to remove the old layer of paint. We will do with the help of sandpaper, pre-rubbed the surface with a cloth or sponge. Sand the circular wide movements. First, clean sandpaper large grain grain. We carry out work thoroughly, submissal by removing the old coating. Make sure not to erase the layer of veneer.

After the procedure performed, remove the dust with a flat tassel, the dust will not be completely removed from the rag and can be clogged into the surface or slot. This may affect painting.

Repeated cleaning, but already sandpaper shallow grain grain. We remove dust in the same way. Upon completion of this stage of restoration, it is necessary to spend thorough room cleaning.

It is necessary that in the future dirt did not hit the surface that you need to paint.

Remove fat and dirt

Furniture from chipboard before painting must be cleaned of dirt and fat. For this procedure, drugs dissolving fat are used.

Wash the sponge or soft cloth, slip, let's dry, wipe the napkin.

Primer - the main character

The primer is an important part in the process of restoration of furniture, with its help you will highly produce the painting of the cabinet. It also contributes to the rapid drying of the paint, because it does not allow dampness to absorb into the surface. The positive point is that after the priming, the saturation of the color of the paint will remain the same as when painting.

If you have chosen for staining acrylic paint, then the primer must be taken on an acrylic basis.

Staining will be very good quality, because the elements of materials for painting are perfectly combined with each other. Before priming it is important to get acquainted with the instruction manual, find out what time the primer should dry, as it is necessary to paint only dry surface.

Apply it with a roller very thin layer, leave for the time specified in the memo.

Paint and varnish technology for furniture

After the foregoing preparations go directly to painting. There must be several layers, so the structure of the plane will not be visible. First, it is painted on the tone lighter selected color.

The paint from time to time you need to dilute with water, otherwise it can thicken.

Then we carry out the work of the main color, leading the tassel in one direction, so the paint falls uniformly.

The number of layers is determined visually to achieve the desired effect.

If you paint with multiple colors, use greasy tape at the edges so that the paints do not be mixed. It is necessary for a certain time so that the furniture is dried finally - approximately 2-3 days. After covering the surface with a transparent varnish, it will protect it from external influence.

When the works are over, we collect the elements of the cabinet.

To apply paint or varnish is necessary not only for beauty, but also to prevent the release of hazardous substances, in particular formaldehyde. If at home children and for you is of great importance, so that the finishing materials are odorless, apply acrylic varnishes on a water basis.

After dyeing, your furniture will not only change the appearance, it will become an interior highlight.

Another acceptable option is NC Luck. Instantly dries, the dusty raid on it is not noticeable. Apply it better in two layers. If there is already a certain coating on the furniture, the oil varnish PF-283 will be perfect.

Facing will become strong and good, will hold a very long time.

Want to cover with a tint, use an alkyd lacquer with toning, especially since the color palette is quite diverse. To give a gloss, use the yacht varnish, the furniture will look just flawless.

Good tool for protection, also decorative finish The surfaces made of wood is a yacht varnish.

Of course, work on the preparation of furniture to painting is taking a lot of time. If they ignore them, the proper effect may not be, and the coating applied to the furniture will quickly fall off. You need to do everything according to the rules. Update outdated furniture is not difficult, as it may seem.

A little fiction and patience, and a luxurious piece of furniture will appear in the house.

How to paint the wardrobe and make gradation of colors

The painting is widespread currently. People want their apartment or home unique, without monotony. And many furniture manufacturers try to release products specifically without any embellishment so that each can decorate independently. Many differently approach this process - use the original style or decorate copies of famous paintings.

It is possible to give uniqueness absolutely any furniture, whether it is a dresser, a bedside table, a wardrobe, a table, a chair, a chair, change the look of the room so that no one knows the old furniture in the new interior.

Art painting is an exciting business, the furniture will play in a new way. You love and know how to draw, will not work out of ordinary cabinet Make a real work of art by applying all its imagination. For creative work it is worth using acrylic paints. Image must be applied to the base. The main thing is that the topic of the drawing completely harmonized with the interior. Flora and various patterns will look unique. It looks very unusually furnished furniture painted by a cracker.

Cracks will give the subject of the interior very old appearance.

If the cabinet has many boxes, better suitable gradation. A transition between the shades of one color is performed or you can use different colors. For example, you make a phased transition from green to yellow or from lilac to pink or blue. So that the transition was without sudden boundaries, each time you should add a color pigment to the paint. You can draw rainbow or something else, at your discretion.

Especially original gradation will look in the children's room.

Now many ways of alternating colors, they all sufficiently deserve attention. You can use any of them you liked. Do not be afraid, create! It is only necessary to want, and everything will turn out.

Video: Let's give a new life to the old cabinet.

Options for updating old cabinets - 50 photo ideas:

Cheap racks and cabinets made of laminated chipboard and MDF thought as items that can be easily replaced by analogs of other size, shape and colors. But now the home masters easily repainted such furniture

- And share experiences on the expanses of repair forums. We have collected the most common recommendations on color updates, carefully checked them, and now they are ready to convey to you: Kraste boldly, you will succeed!

1. Remove fat and dirt

3. Primer - the main character

IMPORTANT: At this stage of work, all the unauthorized accessories thoroughly creek by painting tape!

4. Get fractured

6. Laccination Finish

If you repainted the facades of the wardrobe or kitchen cabinet - that is, the details of furniture that are exposed to great wear - it makes sense to cover the painted surface of water-based varnish. It will protect the paint from external influences, scratches and abrasion. True, there is a danger that the varnish sees with the years - but you already know how to repaint your furniture again!

Anyone sooner or later has an insurmountable desire to change something in the ordinary interior of his home or apartment. Often, the usual rearrangement of furniture does not bring satisfaction and does not allow to achieve the desired effect. In such cases, it helps the cardinal change in the appearance of the interior items by staining them. Given the fact that most of the modern objects of the situation are made from inexpensive and publicly available materials, today we learn how to paint furniture from MDF at home without the help of specialists.

What can come in handy for staining furniture from MDF?

The fact is that changing the color of the entire object of the interior or its individual parts allows you to transform and completely change not only their appearance, but also all the premises in general, give it some new feature, a highlight. I am glad and the fact that painting furniture from the MDF does not require the ownership of some special skills and the presence of complex factory equipment. It is enough to prepare required tools and buy suitable paints and varnishes.

What instruments and materials are needed for work?

To dramatically change the appearance of your favorite furniture, take care to start work at your hand you have all the necessary tools and materials in the required quantity.

To finish furniture elements from MDF, you will need:

• Depending on your idea, one or more cans of the paint of the desired colors.
• Wood putty, which is used for sealing joints and partial repair.
• Capacity for breeding paint.
• Malyary tape desired width.
• Flat brush.
• Roller with a long small pile.
• Gloves to protect hands.
• Respirator, in order to protect the respiratory tract from the toxic selection.
• Protective glasses.

Important! To create a protective layer, you may need primer, but if you paint the laminated surface, it is not useful to you. It is desirable to prepare and a piece of emery paper to clean the end surfaces and putty.

What paint is better to paint furniture?

Before starting to work, it is necessary to figure out how you can paint furniture from MDF at home. To begin with, you need to decide in advance what result you wish to achieve. Depending on this, the corresponding coating is also recommended. Paint and varnishes used for decorating furniture are conventionally divided into two types:

• Transparent.
• Opaque.

Important! Opaque formulations, due to the presence of special pigments in them, are used to create a protective layer and strengthen the natural shade of wood.

The opaque substances belong:

• Olife
• Azure.

There are such coatings are much more expensive than pigment paints, in particular due to the fact that they use them in working with the most expensive furniture made of expensive wood. If you are painted conventional MDF furniture, you can use ordinary means Based on latex, acrylic or polyurethane.

Important! If the furniture you want to update is quite old and has minor scratches, it is better to paint it with compositions based on oil or water. Interior items covered with water-based paint look incredibly beautiful and serve for a very long time.

Universal Options:

• Last demand has recently used alkyd mixtures, due to the fact that they are easy to apply, they dry quickly and serve longer than water and oil paints.
• No less actively apply compositions with polyurethane, but it should be noted that they allocate substances harmful to health during operation. Therefore, you need to constantly ventilate the room.

How to prepare for painting of the surface?

Studying overall information, many are interested, is it possible to paint furniture from MDF without prior preparation. In principle, yes, but experts argue that it is better not to neglect this moment. Preparing furniture for staining must be carefully so that in the future there is no problems with it due to the mechanical effects and temperature differences.

The surface preparation process includes the following steps:

1. First, the products are processed by sandpaper to create a rough surface. If there are large scratches, the cracks should be filled with putting on a tree, then sanding once again to eliminate the irregularities and differences. The main goal of such processing is to eliminate smoothness, which negatively affects adhesion.
2. Then primer is applied to the processed areas, which will provide them with additional adhesion, reduce the total paint consumption. In addition, the primer allows you to create a barrier between the natural substances of the tree and paint to prevent the poor-quality clutch of the layers.

Features of coloring MDF surfaces

We have already reviewed several important stages of work. It remains only to understand how to repaint furniture from MDF with their own hands. This process is incredibly simple, but, nevertheless, has certain features:

1. Painting the surface should be solely in one direction. Paint layers can be somewhat, preferably two.
2. The last layer is recommended to be applied along the painted canvas.
3. The second layer can not be applied until the first fails to dry
4. All surfaces must be completely dry, without fat stains and traces.
5. Try not to cover furniture more than two layers of paint.

So we learned the answer to the question whether it is possible to repaint furniture from MDF to another color. The main thing is to stock the necessary inventory and materials necessary for work, carefully prepare all the surfaces, and during staining it is clearly followed by the above recommendations.

Rearrange furniture from the room to the room - and worry because of the mismatch of shades? Want to make the living room brighter, and the furniture to throw out a sorry? Cabinets and chairs can repaint - we will tell me how

Cheap racks and cabinets made of laminated chipboard and MDF thought as items that can be easily replaced by analogs of other size, shape and colors. But now the home masters easily repainted such furniture - and share experiences on the expanses of repair forums. We have collected the most common recommendations on color updates, carefully checked them, and now they are ready to convey to you: Kraste boldly, you will succeed!

1. Remove fat and dirt

From the surface of laminated furniture you need to wash off all pollution and degrease it. Use dissolving fat detergents, thoroughly rinse and wipe the laminated coating, dry it with a napkin.

Many of the home masters recommend disassembled furniture. But here it all depends on the complexity of painting - if there are many boxes and platbands in the rack or cabinet, then, of course, it is better to disassemble. If the form of furniture is very simple, and you want to paint, for example, only the facades, you can leave the cabinet "As is".

2. Create a rough surface

The coating on modern LDSP and MDF is made of PVC, and therefore, like any plastic, poorly wetted even with water, not to mention the paint. For better adhesion (clutch of paint layer with a layer of laminate), it is necessary to process the surface of the thinnest sandpaper ("zero"). It is best to work in the respirator - dust from the layer of laminate is very harmful.

3. Primer - the main character

So that the paint lay down exactly, without rolling, and did not go with bubbles in the near future, be sure to get the surface of the furniture. We are looking for a soil who sticks to everything - even to glass and cafes: almost all manufacturers of modern paintwork materials already produce such primers (usually they are on a polyurethane basis). The cost of such a primer is quite high, but it is not worth saving on it - its quality can be even more important than the quality of paint.

Motorists are divided by a secret: you can use primer for bumpers from the canister. Here the respirator also does not hurt. The primer layer in any case must be dried. And well, if you highlight for at least 12 hours.

Important:at this stage of the work, all the unnecessary accessories thoroughly creemet painting scotch!

4. Get fractured

The item is optional, but many of those who successfully repainted furniture from LDSP, regret that they did not take advantage of the putty before painting. Filling dents and scratches are recommended in two ways: either using latex putty, or using epoxy resin-based compounds (there are even tips on the use of gelcoat).

In any case, after putty, it is necessary to breach and dry out the surface.

5. Paint: What to choose and how to apply

Alkyd enamels and polyurethane paints are suitable for repainting on top of the PVC film - it is best to buy a special paint material with a mark "for furniture", so as not to disturb the overall ecology of the apartment. Epoxy enamels usually give a good result, but dried too long and saved the smell. There are many messages about home repainting MDF and LDSP acrylic latex compositions - subject to the use of special primer (sometimes even two layers).

For painting work The masters recommend a velor, not a foam roller of a small size - it will paint the surface smoothly, neatly, without unnecessary air bubbles. If you decide to paint your shelves or facades in two layers, let's completely dry the first layer.

Corners and hard-to-reach shorts handle with a bevelled cluster.

Professional approach - staining with a collapse with paint consumption from 60 to 200 grams on square meter. The diameter of the nozzle and pressure will have to calculate alone taking into account the type of paint.

What thickness should the insulation for the walls of the brusade house? Finishing materials for facades of private houses under the brick
Snify the base wooden house asbestos cement under round stone