Today, very many people have old furniture. It seems to be pouring her sorry, but also the view he spoils. In reality, you need to make a simple restoration. How to do it? Let's deal with this article.

Work process

Suppose we have such a wardrobe. After upgrading, he will stand in the hallway. You can say to meet guests. First you need to remove everything you can. This is primarily the door. Andresol should be downstairs. It will be convenient to store shoes here. For it, bars are put on the edges that are screwed by self-drawing.

The cabinet from above must be divided by partition. Usually any board of the corresponding sizes is suitable.

On one side should put the crossbar. It is perfect for a coat and other clothes. On the other hand, you need to put 2-3 shelves. Again the boards are suitable.

In this photo you can see the switch. But for him it is possible to simply cut through a small hole.

The bottom of the furniture became riding. Here you can store umbrellas and hats. As a rule, old furniture is not very attractive. But it's easy to change it. Just repaint it in white color. It is almost universal. Such a miniature mezzanine will perfectly fit into the distance that is between the main wardrobe and wall. Self-tapping screws and corners are used for attachment.

To begin with, the whole surface should be taken. All before painting is covered with putty. Carefully cover all the paint. After process the surface with varnish for durability.

Doors face the same color. You can use patterns from the old cabinet. Just be sure to treat their gold paint.

Due to the fact that the doors from another cabinet turned out to be small, had to use a special insert. There are many decorative solutions. But you will additionally be fastening the handles you liked.

Shelves can be saved by film, and the rest to handle acrylic enamelwhich has no smell. On the left side you can make a special decorative cutout. Look like it looks great.

As you can see, it is quite simple to carry out such restoration. For this you will not need a lot of money and time. It can make it almost everyone. So you can handle almost any furniture. Naturally, you can make some of your own adjustments. Just use your imagination.

If you recently did repairs or just going to it to proceed, then besides the repair you are surely tormented by the choice of furniture. For example, in new Bedroom The new closet would not hurt, which will harmoniously fit into the new interior. How does most people do? Buys a new closet, and the old goes on the landfill or in country house. However, why spend money if you can make a stylish cabinet that will look at any interior from the old! And for this, it is not at all necessary to be a designer or have tremendous skill in the restoration of furniture. Have a good idea, and a little time and strength.

For example, with a small application of the forces and an excellent photo of the application, you can create a stylish cabinet that will easily become a "star" of almost any interior. To do this, it is enough to clean the sandpaper the door of the old cabinet, paint them with white paint, and then glue the image you like to the cabinet, which you can print a large format in any large photo studio. After that, the wardrobe is covered with colorless varnish.

But to give the old cabinet of a new style not at all be sure to use beautiful pictures. You can decorate it with the help of curly slats, which will be found in every business store. And then paint it paint with divorces. You can see how it is done in the picture. Thin rails are nailed to the closet, and then it is painted in blue. As a result, instead of the traditional factory cabinet of the 60-70s, we get a stylized Mediterranean cabinet of the late nineteenth century, which looks great in a gentle blue interior.

If you have an old favorite cabinet, who saw the sorrowing slightly, but very comfortable, or you do not have a plan now to buy a fashionable compartment compartment, you can update your cabinet with self-keys film.

Film-self-playing is found in various colors and patterns, which will make it easily from the old cabinet make the original furniture, You can cover the shelf film, update the locker on the balcony or kitchen, and also improve the summer furniture, and a lot of other can be done using a film.

For example, as I updated your wardrobe:

The self-tier film is found two species - this is a standard film that can be glossy or matte, various children's, marble patterns and the like.

As well as a special film - furniture, door or metallic, for various worktops.

When working with self-adhesive film, you must comply with certain rules.:

1.Peep the surface under pasting, it is necessary to remove dust and dirt with water and adding detergents. The surface should be smooth if it is not, then it is necessary to align it with the help of primer or plaster.

2. The necessary pieces for pasting from the wrong side of the film are necessary to remember the allowances on the edges, where they are required.

3. In order to glue the film, it is necessary to remove the protective paper from the wrong side to a pair of centimeters and the adhesive side to fix to the surface coated.

It is necessary to watch closely during gluing so that air bubbles do not appear, so it is necessary to glue very slowly and gently, all the time smoothing the surface of the film.

4. If bubbles were formed, which could not be deleted, then you can pierce them with a needle and smooth out.

We present you 4 tempting ideas, how to update old cabinet And turn it into a stylish interior element. You will be helped by several cans of glossy paint, wallpaper, glue and your limitless fantasy.




Update old cabinet




Color it in retro style - modern




How to do it:

Remove the boxes, then clean the cabinet with sandpaper and paint the cabinet in two layers of glossy paint. Make blanks for the front part of each box, cut out a special knife shape made of adhesive plywood, then glue them to the box. Measure the width and height of each box and cut down four moldings so that the edges of them are connected at an angle of 45 degrees. Paint them with white glossy paint and when the paint dries, stick them to the boxes. Wrap the handle with a white tape from the cabinet, then drill the holes in each box and insert the handles.


What you need:

. Cupboard;

. White glossy moldings;

. Fast drying glossy paint;

. Plywood colors of african mahogany;

. 4 handles for drawers;

. White tape.



"Play" with the color of the cabinet





How to do it:

Remove the handles from the closet and paint the main color all the cabinet and retractable drawers. You can even paint the cabinet in two layers. The cabinet will be painted with three colors, so after the paint is dry, spend the second color clear line where there will be a transition. Then spend another line where the third color will be. Then wet the abundantly brush of the second paint and brush down from top to bottom, slightly pressing the brush at the first line so that the paint flows smoothly down. Do the same with the third color. And the handles of each box paint the appropriate color.


What you need:

. Chest of drawers;

. Fast drying glossy paint.



Charm of mirrors





How to do it:

Remove drawers. Cut the wallpaper strips for the front side and glue them to the closet, on each side, retreat 1 cm to flick the edges of the cabinet. The wallpaper glue is absent to the wallpaper and, when you stick them, start them to smooth around the edges. Cut the wallpaper for
The rest of the cabinet and repeat the same thing. After the paint is dry, cover the wallpaper with varnish. Measure the dimensions of each box and the tops of the cabinet. Order mirrored panels and measure the dimensions of the handle holes. Attach the panel with special glue. After the glue dries, screw the handles - but do not tighten them too much, because the mirror can crack.


What you need:

. Wallpaper;

. Mirror;

. Special glue for mirrors;

. Handles for the cabinet.



Be sucks - use 3D effect





How to do it:

Make big letters of any font you like according to the proportions of your front drawers or format text in Microsoft Word or Adobe Illustrator and go to the firm that will help you cut letters from MDF. Remove the boxes and paint their face and side parts in two layers of glossy paint, then do the same with the cabinet itself (except for the back wall). Stick each letter using joinery glue. Give wheels to the closet, it will give him fashionable, modern view.


What you need:

. Text from MDF (order it with a construction company). The text must be painted in white color matte emulsion;

. Fast drying glossy paint for Celtic Forest color cabinet;

. Carpentry glue;

You will need

• - polished cabinet;
• - self-adhesive film;
• - roulette;
• - scissors;
• - floral sprayer;
• - Felt spatula or soft cloth.

Instruction

Use self-adhesive film for decorative finish Cabinet. This method is the most "clean." You do not need a time-consuming process for removing the old coating. The film perfectly will fall on a smooth polished tree.

Remove the sizes from the closet surfaces to be updated. Purchase self-taking suitable coloring and textures. Pay attention to the width of the film to avoid unnecessary junctions on visible surfaces.

Carefully inspect the polished surface. If it has deep and wide scratches, chips, close them with putty for woodwork. Pre-skill these places and boot. After drying the putty, once again pass the irregularities.

Set aside the necessary sizes on a different reverse side of self-keys. You can update the entire surface of the cabinet, only the doors or make the imitation of decorative inserts from the film. For this purpose, a film with a pattern for weaving or skin will be worse.

Type the water in the floral sprayer and add a little means for washing dishes or liquid soap so that the soap solution is slightly.

Sprinkle with soapy water on the surface of a polished cabinet, where you will stick a self-adhesive film.

Separate self-tier from the base from one edge by 5-10 cm. Bend paper, and attach the sticky side of the film to the moistened surface of the cabinet. Take a felt spatula or a soft cloth. Carefully smoothing out of the middle to the edges, drive away from the films of water drops and air.

If a fold was formed, immediately recall her, separating the nearest edge of the film. Randomly the resulting air bubble pinched the needle, then press this place with a cloth.

Select new handles and decorative lining for the closet. You can form the doors with wooden platbands or polyurethane moldings or cartoons.

Sources:

• how to update the old cabinet with your own hands

At the surface of your old convenient cabinet, chips and scuffs appeared. Do not hurry to carry it on the garbage. Restore decorative coating, eliminate scratches, refresh the look of durable home furniture with your own hands.

You will need

• - grinding;
• - Sandpaper;
• - means to remove paint;
• - Putty knife;
• - brushes;
• - roller;
• - screwdriver;
• - varnish or paint;
• - primer for wood;
• - new loops and handles;
• - putty.

Instruction

Pull all things from the closet and remove them from the room. Remove, carefully inspect them, keep your hand. On their plane should not be hook or roughness, otherwise you will spoil your things. Small irregularities can be sanded and covered with varnish, or cut down new shelves from a suitable material.

Remove the old lacquer or colorful cabinet coating. For removing old paint. Use a construction hairdryer or a special wash. After softening the colorful layer, remove it with a spatula. Link coating remove grinders. Small details blocked by sandpaper.

Treat the entire wardrobe cabinet for wood. If traces of insect pests are observed on a wooden surface, then wake the damaged places with a special makeup from the vullee bugs.

Take a putty to the tone of purified wood. Get small cracks and chips. Let the putty dry dry well. Treat the sandy places.

Cover the surface of the closet varnish or paint. If you quote the fuck, then after each new layer, go through the surface of the shallow eye. Then, do not forget, you remove the dust with a damp cloth, and only then apply the next lacquer layer. If you paint the wardrobe, then thoroughly dry each layer before applying a new one.

Install the shelves, screw the handles and locks. Pens and other decorative elements pre-look at the store. New fittings can extremely transform your old wardrobe.

Video on the topic

Helpful advice

When restoration in the room, work acrylic varnish and paints. They have sufficient strength and do not smell.

Sources:

• restoration of the cabinet with their own hands

There were times painted tables, chest of drawers and chiffios. Humanity is experiencing the era of polished surfaces. But polishing ages, letters cracks, is cleared during operation.

You will need

• Sandy skin, solvents for varnishes and paints, acrylic or alkyd paints of the desired colors, brushes, rags, self-adhesive film.

Instruction

Purchase emery paper and solvents for paints in the shopping department of the store. And if the furniture itself is still quite suitable, it is not difficult to return it to the pristine appearance. And if desired, you can change the color to the more modern or most acceptable in the ensemble of the entire headset. For this, first of all, it is necessary to get rid of the old polishing.

If there are chips, remove the old varnish with the emery skirt. First coarse-grained, then finely slowly clean the surface with circular motions. Skirt for the convenience of work, screw on the wooden lump and fasten with small cloves. Pick the size of the bar. If damage is small and no chips, the scaling can be limited to the treatment of the surface moistened in the solvent with a cloth.

Prepared degreased surface cut into the desired color. Use acrylic or alkyd paints. Oil paints For a very long time, at today's times, dry. Tighten the repair process in urban opportunity, as a rule, no. After the paint is driving, cover the surface with colorless varnish.

There is less time-consuming, but not less effective method: Update with a self-adhesive film. Measure all areas that require restoration, and write down the data. Go to the Economic Store and choose the colors you liked. Film-self-player.

Remove all metal or plastic protruding parts from the furniture. Surfaces to be saved, thoroughly wash with soap detergent. Before applying the film, the covered surface is pure cold waterSo that the glue does not immediately grab. This precaution will allow you to fix the canvas if you immediately put inaccurately. Placeing the sheets of the film, drive out the water from the center to the edges.

note

Clean the film long and small section parts, for example, table legs, inexpedient. They are better to paint.

Helpful advice

If the work is large in volume, you can use the grinding machine, taking it to hire or with friends. Work will go faster.

Sources:

• polishing furniture

If old furniture remained in your house, you should not throw it out. Inspo in the second life in the old cabinet can be possible by restoration. Of course, you can not update the furniture completely. This is not required. You can return old furniture attractive appearance. This is for all. Choose a suitable design idea and proceed.

Stages of restoration

First you need to remove the shelves and doors. Do not forget about the handles. The easiest to paint the cabinet again. Take the machine for grinding and remove the old layer of paint. This process must be made. Treat the closet surface outside and from the inside. Thoroughly pass the machine for grinding each box.

Paint the surface B. suitable color. Choosing it, focus on the general color gamut interior. Do not want to do? Then buy the adhesive film, try the options with the pattern. Do not rush, thoroughly align the film in the process of pasting.

If you are not satisfied with the doors, remove the old and order new in the workshop. Decided to leave old door? Then be sure to tighten the screws. The door must close easily, without a screen. If you wish, you can have old handles. Carefully remove the paint from them. This can be easily done if you use a special composition for etching. After paint the handles in your chosen color.

If you do not have a grinding machine, wash the wardrobe with a washing powder. Lose time to dry the wardrobe. Wipe the surface with a degreaser. Old cabinets can have a varnish coating. In this case, it is ideally used to remove a varnish. If there is an opportunity to spray a wardrobe with fugnitide or insecticide, do it. Often cracks or chips are found on the surface of old cabinets. Slip these places, otherwise the appearance of the cabinet will be spoiled.

Buy primer and cover the cabinet. Wait for the complete surface drying and perform the grinding process. It is easy to do with fine-grained emery paper. Do not forget to polish surface inside the cabinet. Carefully remove dust. Only after that it costs. Start dyeing inside the cabinet. Use the roller, it will make the paint with a smooth layer.

Cover the cabinet with a transparent varnish after drying in paint. Return to the place the shelves, doors. Screw new or renovated handles. The cabinet will serve you for a very long time. All work can be performed independently. If you do not want to deal with restoration, you can contact the specialized workshops.

Video on the topic

In our article we will tell how to perform restoration of the old cabinet with their own hands, present photos and drawings.During the alterations, you will receive an indispensable experience, and your home will appear an exclusive author's decor.

Almost everyone in the farm has a polished wardrobe, which has lost their former appearance, but retained its functionality. You can easily give him a completely new image, and to fit it perfectly into the interior. You will need some tools, finishing materials from any building materials store, fantasy and a few hours for creativity.

It is necessary to start with the definition of the style of the future cabinet and performing thumbnails on paper. The creative plan will be strongly dependent on the volume of the restoration or change the cabinet dramatically, or just update the facade (correct punctuation).

In contact with

Odnoklassniki.

We update the cabinet in the most common way: Painting

Easily and quickly update the cabinet can be easily replaced by coating - it is even a newcomer. It will be necessary to completely clean the cabinet from the coating, and then cover the new and change the accessories. If there are deep damage to the surface, they can be smeared with a mixture of glue (PVA) and sawdust (the consistency is selected "on the eye").

Tools that can be useful in work:

• skar;
• sander;
• painting brush and rollers;
• self-tapping screws and bolts;
• accessories;
• screwdriver.

Materials required when working:

• solvent;
• gasoline "Galosha" (oil-based solvent);
• primer;
• putty;
• paint (nitroemal NTS-132, NTS-25);

The main steps:

Colmia required tools And the materials can be launched. It takes place in several stages:

1. Collapse. Unscrew all the handles, shelves and doors. Think whether old elements and fastening will be applied, or only new ones.

2. Cleaning. It is necessary to clean the furniture from pollution and dust, and then from an unnecessary coating. The paint layer from the surface and accessories is erased with a solvent, and then degreases with gasoline "galosha" and left until complete drying.

3. Using grinding machine, in other words,, give the surface of the closet smooth shape. If there is damage, it is necessary to use the putty to disguise them. Then carefully cover the primer the entire surface and give dry. Please note when choosing a primer on its compatibility with the future color of paint. After a complete burden, it is necessary to abdicate the shallow sandpaper all the surfaces.

4. Painting.

Good to know: the best choice For the closet surfaces there will be paint of wear-resistant varieties. Start painting follows from the most remote areas (rear wall, base, shelves), thin layer. Depending on the author's idea, the cabinet can be covered with one common tone, and then stick parts, patterns or perform it with multi-colored (each cabinet element is painted in your color and tint).

5. Assembly. The final step is to build a "new" cabinet and fitting fittings. We carefully fasten all the elements of the cabinet, back into place: handles, locks, loops. The best option For the cabinet there will be pens that decorated manually in the author's idea.

The fastest and cheaper method: Moving Film

Another inexpensive and fast way Cabinet updates are a self-adhesive film. First of all, you need to find a high-quality self-adhesive film on vinyl-based. It is easy to find in building markets or building supermarkets.

The drawing can be any of your choice, the main thing is that the end result has a worthy appearance. Vinyl films are well tolerated high temperatures, do not let the water. To work, you will need a minimum of tools, film and a bit of patience.

We will need the following tools in our work:

• roulette;
• stationery knife;
• scissors;
• line;
• scraper;
• film.<

Take note: Large and smooth cabinet surfaces process roller, and corners and irregularities with thin brushes. After complete drying, the paint should be applied with a colorless varnish.

The main steps:

The entire process of updating the cabinet film is produced in several operations:

1. Remove the size from all surfaces of the cabinet: facades, side sides and boxes. For convenience, it is necessary to disappear the facades and put them on the horizontal plane, unscrew the handles and fasteners.

2. Fully launder all the details from dirt, you pay close attention to bold stains. Surfaces should turn out perfectly smooth, clean and smooth. If these conditions are not fulfilled, then in the near future the film will peel and swell.

3. The film has a protective layer on which the centimeter markup is printed. It greatly simplifies it with cutting. The dimensions are better to transfer to a film with a margin into one or two centimeters (excess easily will be removed with a knife). Please note if your drawing on the film is repeated so that it coincides with the adjacent surfaces. Cutting films on smooth surfaces produce a knife and a ruler, and on curly areas and angles with sharp scissors according to a predetermined pattern.

4. Singing two centimeters of the film and apply it to the details. The film is not immediately with glue, but gradually a plot behind the site, leveling the scraper and removing air. When forming small bubbles, you should not panic, you can simply pierce from the sewing needle and drive the air.

5. After saving all surfaces, a cabinet assembly is made. For a deeper alteration, you can replace the old accessories to the new one.

In this way, it is possible to restore the cabinets in part by partially by a couple of bright inserts only on the facades or completely accumulate all visible surfaces. Vinyl films are painlessly carry wet cleaning with detergents.

Creative ideas

You should not stop only on the above methods. Creative people have long come up with inexpensive alteration options and willingly or shared.

• change the color of the surface of the cabinet can not only with paint and special film, but also with the help of tissues, leather, ceramic tiles;
• plastic, glass, and patterns of contrasting colors can be applied to the decor, as a bright accent on the cabinet;
• for a more artistic image of a cabinet, you can use a photo printing, manual painting or.

As you already, probably, understood, the process of updating the cabinet is applicable for both kitchen and wardrobe coupe. The process is simple and fascinating, and as a result, it turns out a unique subject of the interior to your taste and color. Any updated thing made by on its own will give your home comfort and positive.

We offer to see an interesting video on how to give the old cabinet a new life:

In contact with

See inaccuracies, incomplete or wrong information? Do you know how to make an article better?

Want to offer photos on the topic?

Please help us make the site better! Leave the message and your contacts in the comments - we will contact you and make a publication better together!

Cupboard In the home interior is a thing, which, as a rule, uses not one year.

Unfortunately, we often face the fact that the furniture, once modern and served by faith and truth, becomes obsolete.

It is not surprising that over time his appearance loses the former gloss: onsurface scratches and cracks appear, varnish,paint dull, or change the restfurniture The room makes it irrelevant in the new design. In the end, the question arises: what to do with him next?

The basis of such furniture, as a rule, remains strong enough, and throw it simply sorry.

In this case, there are two options. Either buy a new one or if there is a desire and creative mood,refresh the cabinet with your own hands. The second option will significantly save funds and will be proud of our own work of furniture art.

Why throw out something that can still serve as a minimum for several years?

What can be made from the old cabinet ? Furniture update methods. Before starting work, the project should be in advance and submit to what the new appearance will be. Based on this, it will become clear withhelp what is the finishfurniture surfaces.

In the event that your wardrobe is well preserved and perfectly performs its utilitarian functions, it will not be much difficult to update it.

Recovery techniques are classified based on materials used: Specialists applywallpaper and paint , photos and fabrics, mirrors and decorative plaster. Having considered all the options, you can choose from them the most acceptable and decide,how to update the old cabinet.

As practice shows, you can give the second life almost any thing.

One of the most economical and affordable waysupdates of the old cabinet with their own hands - pasting wallpaper . This will not require special skills or efforts. The recovery procedure is no different from ordinary repairs with a crossingwallpaper - except the surface will be different.

It is desirable to select such a material that would simply wash using special chemicals.

1. First you need to choose the designwallpaper, color which will "fit" into the interior of the room.
2. Purchase the desired amount of material, pre-measuring the case areafurniture.
3. After that, only cut the bands of the desired length, apply layer of glue on the surface of the cabinet and try gluedwallpaper roller.
   

If there are certain patterns and patterns on indoor wallpaper, it is desirable that the furniture is finished with a single-color coating.

Using wallpaper can be turnedold cabinet in the harmonious part of the interior. Designers of premises often resort to this reception, creating unusual projects.

Bloom up beautiful canvases, update the old furniture, by producing her restoration with their own hands will be able to almost everyone.

Photorestrastvation

Another option how to transform the old cabinet, - This is the use of photos or photo wallpapers. This can be done using typographical firms engaged in widescreen printing: with their help you can increase any pictures and decorate the surface of the body, turning it into the panel or collage.

Modern technologies allow you to make pictures of large size and high quality and practically on any surface.

Before glue photos on, you need to clean upsurface Furniture from Stroypaints and align it with grinding andlayers primer coating. After that, you can start closing photos. It is also practiced to secure a new appearance.using application layers transparent varnish.

When applying pictures on glass or mirror the picture will be a glossy, and on the chipboard - it will be matte, like a photo printed on matte paper.

Painting Update

New design of the old cabinet you can create with repainting. And we are talking about to refresh the sweatsurface and radically change itpaint color , giving furniture freshness and originality. This is one of the most popular restoration methods, which opens up a wide range of interior change opportunities and increasing options for What can be made from the old cabinet.

The best way to decorate and update the old closet is its painting.

Using paint will require preliminary training.

Fabric decor

Refresh old cabinet you can also with tissue. This will give out the outlines of softness and volume and will make it harmoniously combine furniture with the interior. The convenience of this technique is that at any time you can change the selectedcolor without resorting to re-preparation Surfaces.

The facade design fabric should be combined with textiles already available in the room.

To update, you will need:

• The cloth;
• P rLYLYUKA (SINDER or POROVON);
• FROM tOOL FOR FURNITURE.

Contrast drawings on the tissue facade of the cabinet are very elegant, and also give the interior of the "Japanese" atmosphere.

First, the lining is fastened over the entire surface of the housing using the bracket (another option - use liquid nails). Matter is tensioned on top of it and symmetrically enshrines.

Stencil

Applying decorative plaster is a more complex procedure that allows you to create bulk facades with an unusual volumetric pattern.

This method is obtained by volumetric elements, which can then be painted or don.

The updated surface can also be painted in the desiredcolor , apply gilding or even a patina, giving the effect of easy-to-face.

If the product that you decorate is covered with old paint, it is necessary to process the entire surface with emery paper.

For work it will be necessary:

• D. ekwater plaster;
• Putty knife;
• FROM pecial Scotch;
• Sh clacken stripper;
• T. rafaret (it can be bought or done independently from cardboard).

Rollers for decorative plaster.

Previously need to handle the sections to which the decor will be applied. Stripping is made to the wood layer. In the presence of cracks, they are recommended to smear the layer of putty to alignsurface.

The stencil is attached to the closet with the help of a tape, and a layer of decorative plaster is uniformly applied on top of it.

Stencil is removed before the plaster is driving. The unevenness arveled with a knife or spatula.

When the decor dries, it can be laid out again.

After that, you can start painting or coating with acrylic varnish. It will savesurface From damage for a long time.

Mirror decoration

Elegant solution is the installation of mirrors on the facadesold cabinet.

The mirrors will give the volume of the room and clarify the space by making it more attractive.

For such a transformation, mirrors will need and fasteners. Carefully measuring the facade, you can order a canvas in a specialized workshop.

The mirror on the cabinet door immediately transform the room and update the interior.

It is worth considering that the use of liquid nails implies the horizontal location of the surface. Therefore, you will have to either disassemble the case Either use ordinary attachments.

No need to smear the entire surface or to apply thick strips too close to the edge.

Old furniture that served a long period is not necessarily replaced. Showing fantasy and putting a little effort, you can give her a new appearance with your own hands and increase the service life for several years.

We hope that our ideas and tips will be useful to you.

Video: How to paint the old cabinet.

50 photo ideas and decoration of old cabinets: