The ideas of the restoration of the old cabinet do it yourself. How to paint a wardrobe from chipboard in white

07.04.2019 Doors, windows

Many interior items, primarily furniture, are able to serve for years. And sometimes does not play the role of material from which they are made. And all the last time - scratches, chips and other surface damage - easily renovated. At the same time, furniture can be returned to the initial look or, if desired, it is completely different. So how to paint the cabinet from the chipboard, so that he harmoniously fit into the new interior?

In the production of modern furniture, chipboard and MDF are widely used. Raw materials for their manufacture are woodworking waste - chips and sawdust connected by a binder (for example, formaldehyde resins) into a single integer under high pressure. The appearance of such products is shown in the figure below. As a rule, they are produced in the form of plates.

Especially it is worth staying on the laminated chipboard (LDSP). A layer of melamine resins is applied to its surface, which will be smooth and brilliant coating.

True, it creates certain difficulties in staining. However, they are overcome high-quality surface preparation. It is necessary before painting a cabinet made of laminated chipboard, to handle it with a skin and use the soil.

How to paint furniture from chipboard?

Currently, the furniture from the wood array is quite rare. As already noted, chipboard is used in this or that form. But to give the material of the necessary consumer properties, it is often stained or a special coating that imitates the valuable rocks of the tree is determined, and protected by varnish. All this creates additional difficulties in restoration old furniture.

The decision, how to paint the wardrobe from the chipboard, with your own hands or take it into the workshop, is quite simple. You can perform this work independently, the main thing is to comply with the repair technology. True, it is worth considering that the procedure is quite laborious. The order of work will be like this:

Remove all accessories: handles, loops, holders, hooks and other elements. There should be only a wardrobe yourself if you have conceived to paint it.
Seared existing scratches, cracks, chips and other damage on the surface. They must be sharpened, and in two layers. The fact is that after applying the first, shrinkage of the material is possible, it is necessary to compensate for it.
Over the entire surface, you need to remove the old coating: varnish, paint, or, if it is LDSP, - resin. For such purposes, it is best to apply grinders, it will reduce the time spent and facilitate the work. If it is not, you will have to use the skin and remove the old coating manually. The skin should be fine-grained, during the execution of work it is necessary to obtain a flat, smooth surface, including on sharp-absorbing sites.
After the end of the processing, it is necessary to remove dust with a dry cloth. If there are areas that are unacceptable to enter paints, such as glass or mirrors, at the place of their joint with painted places should be pasted with greasy tape.
Now you can start applying soil. It will provide better paint adhesion, less than its consumption and serve as the basis for the formation of a smooth and smooth surface. Primer with a brush or roller is applied in two layers, follow-up after drying the previous one.
On the dry, the prepared surface of the paint is imposed in any convenient way. For such purposes, the paintopult can be used, special coloring materials can be used, although at home is usually used roller or brush. How it is executed, shown in the video:

If you have to paint the LDSP, then special attention should be paid to the grinding step. In this case, it is necessary to gently remove the entire layer of the protective melamine coating and only then begin to the other stages of work. And do not forget to apply primer, otherwise the paint can simply not stick to the surface.

Oh colors

Do not really think about how to paint the cabinet from the chipboard. For these purposes, any paint can be used. Usually used acrylic, it has a wide color palette and is convenient in circulation. It is quite suitable and oil. What paint is better to use, determined by the operating conditions of furniture. If it is installed in the kitchen, where the cabinets must often be washed, their surface makes sense to cover with varnish.

It is possible to use various stencils, which will give your closet a unique look. For example, as shown in the photo below.

Even old furniture seemed to have long served his time, can successfully be used for many years. To do this, sometimes it is enough to give it an updated look, which allows you to achieve coloring. Normal old cabinet With a creative approach to its restoration, it is capable of becoming a subject of permanent admiration, while maintaining its purely utilitarian properties.

Inheritance you got the old grandmother's closet, and you do not know how to paint the old closet, how to enter it in the interior of your apartment? Do not hurry to throw it out or give the older, even despite the fact that he breaks time and looks at all present at all.

As a rule, all old furniture is made on conscience and from the most natural materials. Yes, yes, and your old cabinet is made of solid pieces of wood, which means that you will not find such a modern store. So is it better to return life to the old cabinet? Moreover, things in retro style or even vintage, now in fashion.

In this article we will tell you how to paint the cabinet with your own hands and give it the second life in your interior.

Process preparation

Like any other operation, painting and processing of the cabinet requires a certain preparation:

First you need to disassemble the cabinet as far as its design allows.
First of all, unscrew the handles, remove the metal loops and the door of the cabinet, remove all partitions, drawers, mirrors and hangers.
The next stage is better to spend in a well-ventilated room, and flooring Shut down to avoid damage.

To prepare the cabinet frame, you will need:

sandpaper;
a hammer;
nails;
drill;
and also rag, brush and sponge.

What paint paint wardrobe?

For staining of the cabinet, paint is perfectly suitable on an acrylic basis. It is non-toxic, easily washed and mixed well, which is necessary when selecting the desired color.

The ability of this paint to wash off will help you correct something in your work already after painting the cabinet, as you need to be a big specialist to perform everything perfectly the first time.

Repaint the old cabinet: preparation and technique of painting

After drying, the paint becomes strong and resistant.

When painting a wooden cabinet does not necessarily stick to some one color. You can combine combined colors, highlighting, let's say decorative elements Cabinet with different color. If you can not find suitable colorYou can use both the kel. Gradually adding a kel in white acrylic paint, without much difficulty, you will get the shade you need.

Do I need to be pricked?

Before the painting cabinet must be treated with primer. Before using the primer, it is necessary to familiarize yourself with its instruction, in which it should be indicated, in what proportion to breed it, if it is dry primer, or how much to apply on the unit of the surface being processed.
The primer to the surface of the cabinet should be applied with a thin layer using a special construction roller.

new life retro stands

It should be remembered that before painting the primer should dry well.

Tools for painting

The paint on the wooden cabinet can be applied as a brush and roller. But a more convenient way is still painting with a brush, as it is more convenient to paint the corners of the cabinet frame and small details of decorative design.

There are special tassels for applying acrylic paint.

It is better to choose high-quality brushes for painting, because cheap can spoil all the work.

For example, if tassels are poorly fixed on the basis and start to get out right during operation.

Buying brushes, it should be remembered that it is better to immediately buy several tassels of different sizes.

If the painting process is delayed, you can rinse tassels and put them in a jar with water so that they do not dry, and after some time again continue painting.

Krasim wooden cabinet

Painting of the cabinet is produced in a well-ventilated room. First of all, it is necessary to apply the paint of lighter tones, and then the darker. This rule is important if you combine several colors during painting.

The number of paint applied depends on what effect you want to obtain as a result. If you want wood texture to be preserved, it is enough to put the paint once and a thin layer. For a more saturated color, paint is applied in several layers.

If you combine the colors or create a color pattern, then after staining with a light tone, the places that need to be left light are riveted with painting scotch, and then the paint is darker. It is necessary to maintain clear boundaries between light and dark shades and eliminate the possibility of errors during painting.
After staining, the cabinet must be good, usually takes 2-3 days. At this time, small details, boxes and cabinet doors are scored. When the cabinet frame and all of its parts are dried, they are covered with varnish and collect.

Restoration of old furniture or how to repaint a wardrobe

In our homes and apartments, furniture is one of the most important elements Settings. In addition to its direct functional purpose, it is an integral part of the interior and serves as the pride of its owners. Trying to give the uniqueness and sophistication to our furniture ensembles, we spend a lot of effort on the selection and further maintenance of these objects of the situation.

Separate attention deserves old furniture. Whatever careful care, over time, it loses the former gloss, and as the situation is updated, more and more dissens with other elements of the interior. If it concerns small and not expensive items (chairs, tables, etc.), we just buy new ones. But when it comes to larger, for example, cabinets, it makes sense to think about whether it is worth spending money (and not small). Especially if we are talking about not just old cabinets, but about furniture that faithfully served several generations.

The video shows how the restoration of the old cabinet is being passed:

If the cabinet material (wood) is in good condition, then you can return my second youth own hands. To do this, it is enough to repaint the old cabinet. This, relatively simple, the operation will allow new paints to the interior and will significantly increase the service life of the cabinet itself.

The algorithm of painting the cabinet, like any other product, includes three stages:

Preparation;
Selection of paint;
Paint application;
Application of varnish.

Consider these steps in more detail.

Preparation for painting

In order to prepare a cabinet to paint, you will need to remove all the elements of the accessories and drawers and lockers from the cabinet housing. It is advisable to remove the doors, but first need to evaluate the difficulties that may occur during the dismantling process, and most importantly during the installation process after painting.

The most important and most time consuming, at the stage of preparing surfaces to paint, is the removal old paint.. To do this, it is best to use sandpaper and a metal brush with not very rigid bristles. From the use of special solutions and, moreover, a soldering lamp, it is better to refrain. Despite the high efficiency of these "tools", they can apply serious damage to wooden surfaces.

After removing paint, it is necessary to thoroughly treat the surface with shallow sandpaper so that it becomes the most, smooth and smooth. Wood dust is best removed by a vacuum cleaner with a special nozzle. In no case cannot be used a wet rag - under its exposure, dust will be bored in minor pores, which will significantly worsen the surface characteristics.

Selection of paint

The modern paint industry offers consumers a huge selection of various colors with different characteristics.

Choosing paint for painting the cabinet, it is best to stop your choice on acrylic paints.

These paints dry quickly, environmentally friendly. Absence unpleasant odors Allows you to use them even in closed rooms. Acrylic base Paints allows you to form high-quality, reliable and beautiful coating.

The choice of color paint entirely depends on your preferences. In the color palette of acrylic paints, you will probably choose a color to paint the cabinet that is the shade (or a few shades) that you will have to do with the shower and allow the updated cabinet to harmoniously fit into the interior of your home or apartment.

Application of paint

Before proceeding to apply paint, it is recommended to treat the surface of the primer, which will hide minor surface defects, make it smooth and smooth and becomes a good basis for the paint layer. Acrylic soils will greatly cope with the objectives listed. To apply primer, it is advisable to use a roller. The primer is applied with a thin layer.

After the layer of primer is dry, you can begin to apply paint.

The room in which painting will be made, it is advisable to organize well and clean up (in order to avoid dust from entering the painted surface).

The video shows the process of applying a paint coating on a wooden surface:

The process of painting itself consists of the following operations:

Preparing paint.
To do this, we need a container, preferably with a wide bottom and a device for stirring, with this task there is a well-frightened drill, armed with a special nozzle. The proportion of water and paint specified on the package must be clearly observed. Stir paint should be in two stages. First stir up to a monotonous state, give a solution to "relax" and mix thoroughly.
We apply a thin layer of light paint. To get a thin layer, allowing to consider the structure of the tree, the paint must be additionally diluted with water.
If, when choosing a style, you stopped on the style of "Provence", then on this process of painting is finished and, waiting until the paint dry, you can begin to apply a varnish;
Afterby waiting for the preliminary layer, you can proceed to apply the main layer. If you need to leave areas free from paint on the surface, then they must be sealed with a special painting tape.

Apply paint needed by unidirectional roller movements or brushes. It will provide a coating smooth pattern.

The paint is applied in 2-3 layers. Each layer is applied only after complete drying of the previous one.

Application of varnish

The covering of the closet varnish is not a mandatory procedure. Modern paints form a sufficiently strong coating. But if you want the wardrobe to which you invested so much forces and time, as long as possible continued to please you with your appearance and, thus, cause envy of your guests, it is recommended to protect the paint with two and three layers of matte varnish.

Matte varnish significantly better with the wiping and exposure to ultraviolet rays.

Apply the lacquer is needed by a foam sponge.

Light, missing movements will allow you to form a beautiful and reliable varnish coating.

As already mentioned, the varnish is applied in 2-3 layers, each of them is applied only after the previous layer is completely dry.

When the last layer of varnish is dry, you can start assembling the cabinet.

How to paint veneer

Recently, furniture, windows and doors decorated with veneer are increasingly found. These products have an excellent appearance, with the only reservation while they are still new and not used. However, if you are no longer satisfied with the appearance of your furniture, you do not need to immediately send furniture on the landfill. You can implement an independent coating update or contact a specialized workshop.

On euro-kamin.com.ua, you can find out information about Euro-fireplaces. To paint the veneer you will need paint or varnish, a sampling, small stacker, roller and tassels.

Conduct furniture to carry out paintwork. To do this, you need to remove all the elements of the decor, where the paint can occur.

10 ideas how to upgrade and paint old wardrobe

If there is no possibility to unscrew them, cover them with a cellophane film (you can use the usual food).

Remove the old coating using fine-grained sandpaper. If the paint layer is quite thick, use the coarse sandpaper. This procedure is long enough and trouble - but use grinding machine In order to facilitate work should not. It will damage the veneer, since at high speeds in the material there may be recesses.

If in some places, irregularities or chips were formed, they should be immediately primed, and only then start aligning with a wood powder. Wait for it to complete drying, then slightly polish with the skin.

Make the mixing of the veil and apply two layers to obtain a more even and saturated color. If you use a water-emulsion or enamel paint, it should not be given a hue.

If you decide to cut a veneer with paint, apply it with several layers. With the use of varnish everything is much more complicated. You should apply the first layer and give it time to dry. If in some places there are "non-pools", they should be removed using sandpaper.

Cover the surface of the veneer The second lacquer layer using the roller so that the coating was more even. You need to follow, so that there are no implications, their removal will be more complicated. To avoid this, it is necessary to ride the roller in a special container well.

Watch that in the process of drying the coating on its surface, dust and other contaminants are not formed, since otherwise you will need to paint the veneer at first.

When a few days goes, it will be necessary to fasten the decorative elements to fasten. It is undesirable to do before, so the varnish dries 48 hours. No need to try to restore expensive furniture from a veneer. It is better to invite specialists of furniture workers to the house or give the furniture in the workshop.

How to paint the wallpaper with your own hands to paint wallpaper, you can use any dispersion paint, for example, the water-emulsion required color. Acrylic latex paints are considered the best option. Collect Wallpapers
Painting of the walls of plasterboard with their own hands, drywall is widely used in the process of construction or repair of premises. With it, you can easily and without excess costs to level the walls, build partitions. Plasterboard gives back well
A new life of an old chair to many of us - who more often, and who less often met old, dilapidated furniture. She quietly lives his eyelids on dyed attics, old dachas, mocking on balconies and loggias, while the owner is not
"Fake" covers The creators of Hollywood films resort to scenery to amazeing their viewers, because to reproduce the facade of the Wild West, much cheaper than to build a real city.
Restoration of ancient table Ancient half-durable furniture is possible to restore, giving her new life. Items antique furniture may be found in your attic. Look, it may be worth returning to life

Refresh kitchen set Nowadays, it is easy enough. This will require only the painting of kitchen facades, after which the lockers will get a second life and delight the woven for more than one year. You can change the appearance of the panels in case their surface sweeping, burned out and lost aesthetics or when the hostess wants to diversify the situation and revise the kitchen interior.

Wallpaper on the walls are subject to replacement in a few years, the curtains can alternate at least every month, depending on the mood, and the furniture, as a rule, serves quite a long time and its appearance, over the years, begins to bother. But it turns out to change the appearance of the kitchen, it is not necessary to buy a new headset at all. It is enough just to purchase the enamel of the color you like and repaint furniture facades. And you can do it yourself.

What materials are used in the manufacture of facades

First of all, it is necessary to decide what is behind the definition of "furniture facades". They represent the facial part of the cabinets represented by the end part retractable boxesAnd also doors:

jumping together;
sliding;
rising;
descending;
folding "accordion".

The facades for the kitchen are made by one-piece and teams (fillets or frame) from:

natural tree;
laminated or painted MDF;
plastic;
shockproof glass.

The aesthetic perception of furniture as a whole depends on the appearance of facades. They are able to decorate even the most unsightly frame. In addition to performing a decorative function, the panels must satisfy the main operational requirements, such as:

moisture resistance;
resistance to temperature differences;
strength to mechanical damage;
easy to care.

Natural tree

Kitchen furniture with wooden facades harmoniously fits into the premises of large sizes. The doors are manufactured in a solid or scribbler, but often there are more accessible options for consumers - veneered panels are based on cheaper material.

Advantages furniture headset Wooden doors are its environmental friendliness and aristocraticity, durability and demand that does not depend on trendy trends.

How to paint a wardrobe from chipboard for all rules

But, unfortunately, the facades from solid wood are too expensive, over time, their surface begins to darken, absorb smells and moisture.

Massif is difficult to create rounded and wave-like panels, as well as elements of non-standard sizes.

Chipboard

The facades from the laminated chipboard belong to the economy class, due to which they meet in many cuisines of our fellow citizens. But besides the low cost and wealth of coloring, they do not have other advantages. But the flaws from the LDSP abound:

simple appearance;
looseness of the internal structure;
swelling in case of moisture ingress;
dISTRIBUTY;
the impossibility of performing curvilinear and embossed surfaces.

MDF

Recently, MDF facades are becoming more popular. They are aesthetic, can have various forms and roundings, covered with enamel or PVC film. This material is the most versatile and further restoration.

Painted and laminated MDF facades possess:

rich color gamut;
glossy or matte surface;
high strength;
resistant to absorb moisture and smells;
the ability to perform facades of non-standard sizes.

The painted facades will be more expensive than laminated MDF panels, but they are more durable. The drawing on the PVC film can mimic a natural tree or marble, but often the upper layer peers from the base, which dramatically impairs the appearance kitchen furniture.

Both materials are afraid of the actions of direct sunlight, so the surface is starting to fade over time.

Glasses, stained glass windows or mirrors, rattan or decorative panels are inserted into the Frame MDF Facade. Such doors are inexpensive and, if you wish, you can easily update even without painting. To do this, it is enough to simply change the filling.

Plastic

Based on plastic panels There are MDF or chipboard plates, depending on which the cost of facades is determined. Often plastic finish with an aluminum profile. Such doors:

do not burn out;
no temperature drops are not afraid;
durable;
highly resistant to the action of aggressive detergents;
have the maximum service life;
waterproof.

The negative features of the plastic refers:

painting complexity (special compositions are required);
constant struggle against fingerprints remaining on the surface;
the possible presence of depressed areas on products appearing as a result of technological processes.

Glass

Facades from transparent, colored, textured or matte glass are installed on suspended kitchen lockers. It can be located in a frame from MDF or aluminum profile, but often glass doors are installed without framing. It gives them an airiness and visually expands the room, but for the kitchen, this option is not quite acceptable.

Thanks to modern primer and coloring compositions, glass is allowed to paint into any colors, although the question arises - is it worth doing this?

Painting facades MDF.

To begin with, determine the color composition. The species of paint on the market are quite a lot, but not all of them can be used in working with kitchen facades.

The best option for painting is the authemal, which:

moisture and heat resistant;
durable;
practically not afraid of damage, except for direct impact of acute objects;
it has many shades.

Painting the facade of the kitchen should be made by color, harmonizing with the interior and suitable for a stylistic solution. Here you can show fantasy and combine two or three shades.

Materials and devices

In addition to the airlock, for painting facades will be required:

tree primer;
sandpaper or manual grinding;
construction hairdryer;
gloves;
screwdriver or screwdriver;
malyary Scotch;
velor roller and soft brush;
gizal for an additional decor (optional).

Preparatory work

For convenience, the facades are removed from the loops, after which they are freed from the handles and inserts in the form of glasses, stained glass windows or mirrors. The loop can not be removed, but in this case they are stuck with scotch.

Laminated chipboard panels need to be cleaned from the PVC film, as it will prevent application painting composition. For this, the facial surface is heated using a construction dryer and gradually remove an unnecessary layer. The film should be tightly so that there are no pieces on the facade.

Next, the surface is shoved from dust, after which they begin to the next stage. It consists in grinding the surface. It is produced by manually shallow skin or used to facilitate work grinding. With it, it is removed with a restored layer and with painted MDF facades, although here you can use a special liquid for removing paintwork compositions.

Upon completion of the panel, the panel is carefully wiped from dust and degreased, otherwise the new coating will turn out to be poor quality.

At the last stage of the preparatory work on the facades, pre-stacked primer on the tree are applied. If there are plastic elements on the doors, they should be laid with primer composition designed for plastic. After a daily exposure, proceed to the immediate painting of the panels.

Coloring

Facades must be crushed in one direction with a roller or tassel. If it is supposed to use a few shades, it will be necessary to protect the surface of the surface before applying the first color, the design of which is provided in the other tone. After the final drying of the paint along the same technology, the remaining area is painted.

Care will look painting kitchen facades From a spray or spray collapse, but it should be borne in mind that part of the paint is necessarily sprayed on the sides. This will lead to overvaluation of the painting composition.

So that the facades looked more effectively, they are additionally applied to the hill. The composition is diluted with water in the proportion indicated in the instruction, after which the pure brush is distributed over painted facades.

The patterned factory is obtained by the method of lesing using for these purposes a wet sponge, a brush with a rigid pile and even polyethylene. They are applied to the surface with hillard, moving from one site to another, resulting in a drawing of broken lines, chaotic strokes or bizarre bubbles. After the end of the "witchcraft" layer, they give a dryer, and a week later, the surface is covered with varnish.

At painted facades install accessories and hang panels on the loop.

Updating facial panels from wood

Painting wooden facades The kitchen at home is reduced in phased surface processing. Its follows:

sand
apply a layer of primer;
paint in the selected color;
covered with varnish.

Alternative methods for updating kitchen cabinets

Some experts argue that painting the facades of the kitchen can hardly get high quality and beautiful.

monophonic or patterned;
with imitation under natural tree, tile or stone;
with drawings under a storm or gzhel;
with holographic or photographic image.

But it should be remembered that the film can solve the update task only for a while. At the first opportunity, it will be wiser or buy new facades.

If the kitchen interior is made in a vintage style, you can try to update the facades to use the decoupage or cracker technique. If desired, they will not master them will be no difficulty, and the effect of ready-made doors will be stunning. A transparent moisture resistant lacquer is applied to the surface as a protective layer, allowing you to wash the facades with a damp soft cloth or a sponge without using abrasives.

The facades with glass inserts decorated by the fabric you like and suitable in style, or a stained glass film. In this case, the need to exhibit deposit kitchen utensils And constantly monitor the order on the shelves. In addition, it will be possible to put the larger number of items inside the cabinet. The kitchen, at the same time, will look neat and well-groomed.

Homemade masters know many more ways to update the appearance of facades, each of which can become exclusive.

01/24/2015 at 03:01

To restore the surfaces of any item lined with veneer, you must first install, from which the furniture itself is made. In furniture items older than 50 years, this is usually an array of cheap wood, in modern - most likely plywood or chipboard. Veneer is almost always thin sheets of valuable wood, this is what they will talk today and talk.

Restoration of veneer: Correction of different types of damage

Fun, which are not rare on old things, carefully cleaned from the old glue and the syringe is introduced fresh glue. Veneer moisturizes and if the cross will be cut off. Sometimes small swolling on the old furniture turns out to be removed by a hot iron. The veneer is warmed up through the wet marla, then the glue is introduced under the bubble, the surface is neatly rubbed and secured the clamp. To remove such a defect in furniture from chipboard, this place is simply heated with an iron and appropriately pressed.
Sometimes the restoration of the veneer is not possible without installing a patchwork. It will take a piece of veneer that coincides in the texture with a restored surface. First, the damaged area is neatly cut, then on a new veneer, picking up the direction of the fibers, along the contour of the old piece, the "Pack" is cut. It is fixed with double-sided paper scotch and carefully smoothed the place of the joints, trying to ensure that the transition be invisible.

A large crack can be treated by inserting a wedge-shaped piping into it, chopped out of a piece of wood most appropriate in color and texture. After processing, it should turn out to be slightly more cracked. The finished patch is driven into the gap, easily tapping with a hammer. She must perform a little over the surface so that it can be carefully aligned.
Small damage (small chips, scratches, dents) on a polished surface can be embedded using a furniture politician. If there are burned areas, they first need to be carefully cleaned and fill with wax or putty. Wax, by the way, can be applied to the treated wood, it is well combined with any other coatings.

How to paint the cabinet from chipboard

Its slightly heated and small portions rub into a damaged place. At the end, this veneer fragment is wiped with turpentine.
Deep scratches are well embedded with a shellated smear, picking up the desired tone. Shellac quickly hardens, and its remnants remove the cycles until this point.
White spots on polishing usually appear from hot - dishes or iron. You can get rid of them with the help of a shellah varnish or mixing turbine with flaxseed oil.
Complete veneer processing can be three ways:

wax
polish
paint with furniture varnish.

The third method is often not suitable for old furniture, since it originally covered with the polish. Before applying the political, you must first apply and polish the primer. Polishing lead without breaking, so that after each passage on the surface there was a thin layer of polish. When the surface is dry, it is grinding with a soft brush to create a light glitter.

Veneer restoration is quite forces homemade MasterIt is only important not to hurry and do it extremely gently, trying to make new materials completely repeated old.

Currently, in stores you can find an infinite number of all kinds of cabinets, chest of drawers, racks, suspended shelvesMultifunctional drawers for clothes and personal belongings. But if you decide not to dive into a long search, and follow the thread of your fantasy, then with the help of the following master classes you will learn how to update the old cabinet with your own hands beyond recognition.

After reading the article, you should not have questions how to paint lacquered, chipboard or wooden wardrobeWhat paint paint and make it suitable for your own style, and you will learn some subtleties of this work.

Painting - This is the most reliable and capital method.
Wallpaper, self-adhesive film and decoupage - Choosing this method, remember that it is not durable!
Tights with cloth and decor cloves - also

Most best Method To update any chipboard or wooden cabinet, naturally, painting is not so expensive, as it seems at first glance, it is enough just performed.

Painting wooden cabinet from chipboard

Selecting paint

For wood processing and chipboard use alkyd or acrylic,
aerosol or ordinary wood paint,
for a deeper staining - varnishes, but most often preference is given acrylic paintm.

They are not toxic, dry when room temperaturethat in our case and when painting home furniture is very convenient, in stores are represented in the widest assortment, they can Colorovatb, i.e. Dilute white paint, seeking the desired color. In addition, there is a choice of acrylic paint with a pearl effect or, for example, metallic.

The aerosol acrylic paint is better than the usual, falls on the surface, creating a smooth and uniformly scratched texture. It is easy to work with it both a professional and a newcomer.

Varnishes are used mainly to give the furniture of ancient, but a well-kept species, noble and rich. In this case, the surface is blocked several times after complete drying of each layer.

Lucky is also necessary to secure the color and protection of the surface from scratches and small damage.

Varnish will need even if you decide to paint the chest of chest under ancient or in the style of Provence.

Selection of brushes and rolling

After choosing paint, special attention should be paid to the brushes and rollers. Why not save on painting, if you decide to update the chest of drawers with your own hands?

For proper technology processing the old surface and good staining Cabinet will be save your view for several years.

When using bad brushes, you will not save fresh furniture from sticking hairs or pile, which is imperceptibly correcting almost impossible.

If you need to paint a big smooth surface in front of you, then for work creek and aerosols are suitable.

ATTENTION: During the work, do not leave the brush dry, it is better to put them in a jar with water, otherwise they will quickly become unsuitable

Technology and methods Painting

Do not forget about the other important painting tools and materials, such as sandpaper or grinding machine, primer, powder, solvent and varnish. All this is necessary to comply with the technology of proper staining.

Equipment:

Natural sandpaper Combine is needed for pre-wiping the old layer of paint and surface grinding.

The primer will need For closeing in small cracks on the surface of the tree or chipboard.

Putty (you can take a car) and the spatula will be useful if there are deep scratches, chips.

Solvent or White Spirit is needed for degreasing the surface before painting for better impregnation.

Varnish performs a protective function and gives furniture shine.

In general, the preparation of the cabinet to paint consists of 5 short, but very important stages.

To start carefully We remove old paint and with mediterranean grinding paper (or machines) Align the working surface.

All dust must be smeared, but without using wet rags, sponges etc. Otherwise, the old paint is only better absorbed, and the new will be bad.

After processing the smallest grain Degrease the White Spirit (acetone) and apply a soil layer for better clutch with paint.

If there are large chips, then pre-fill it with putty and rub it up to a smooth condition. Already after applied one or two layers of primer.

When you know all the stages of preparation, it's time to move to the main stage and figure out how to paint the wooden chest of drawers and chipboard.

Master - Class No. 1. Painting for stencil

Everything was mixed in this closet - romanticism, Chinese motives, and even something from Gzheli. Everyone sees something in it. We study the painting technique.

Materials and tools

Prepared cabinet;

white paint;

solvent;

spray paint blue;

paint gold color;

stencil;

brushes.

Step by step guide

Step 1.

Remove from the cabinet all the accessories, locks, handles, etc. According to the familiar technology, we will prepare a wooden cabinet to paint.

On the working surface (on the floor), we settle the newspaper or a large piece of polyethylene so as not to spoil other furniture.

Step 2.

Take white enamel and solvent. In a small plastic can we breed the paint and solvent according to the instructions on the can with paint.

A paint consumption is also written on the bank, it is better to use this information and dilute immediately the required amount. If you are noticing little paint, then the second time you can get another color.

Making pattern background - we apply the first layer of paint. We leave until complete drying.

Step 3.

If the color turned out saturated and like you, then take stencil and put it on the closet. Gently glue on the front side and side walls so that there are no bubbles.

We shake like a spray-paint and spray it by stencil. For even color, there will be a single layer of blue paint, so we do everything from the first time.

Step 4.

While blue paint dries, collect fittings, removed from the cabinet, in tin gold. After the details were dried, screw them into place.

We shoot stencil from the cabinet and place it in the most prominent place in the room - after all, he now deserves special attention!

You can decorate a wardrobe under the stencil, for example, with flowers.

Master class number 2. Cabinet update from chipboard

This wardrobe looked very cheaply as it was made from chipboard. But we updated it with a beautiful ornament for the children's room, now it can fit into the interior even High-tech or modern.

Materials and tools

Prepared cabinet;

white paint;

pencil;

building level;

sponge-brush;

painting tape;

additionally: Protective paint (enamel).

Decor process

Step 1.

Prepare furniture by stripping surfaces from rough, chips, cracks With putty and primer.

After using special funds you need to give surfaces strongly dry.

Take the painting ribbon And we stick it on the front side of the chest on your individual idea.

We make combinations of triangles on the upper and lower edge, rhombuses in the middle, rectangles in the upper and lower part. Cut the strip and make up of them figures, as shown in the photo.

Rhombus manufactures by cutting the same strips in length and place them perpendicular to each other.

To make rectangles, Show first ribbon exactly, parallel to the cloak of the chest, and with the help of a construction level and a pencil, mark equal intervals. Cut through one.

Tip: Follow the placement of the accessories (handles, locks) and cracks between the boxes - let it be better to symmetrically than exactly.

Step 2.

Step 5.

Final stage - applying protective enamel. It will extend the service life of the cabinet from the chipboard and protects from small mechanical impacts, such as moisture and dust.

And here is a stylish cabinet ready for active use!

Coloring options can also be as in the photo below.

Master class number 3. Painting polished cabinet

Someone can not believe that from the old polished cabinet you can make such a candy in a vintage style, and without loss of functional. And then it is told how to do it.

Materials and tools.

Old polished wardrobe;

vintage paint (ordinary acrylic matte);

white spirit or acetone;

brushes;

sandpaper or grinding machine;

golden handles for drawers.

Process coloring

Step 1.

Despite the fact that we create a vintage effect, the real batch of the chest of anything. Therefore, we carefully prepare it to paint.

To do this, remove all the old accessories and grinding the entire surface of the chest. First use large sandpaper, after - fine-grained.

It is not necessary to putty and primitive, except for serious chips on the surface. Degrease the surface by White spirit or acetone, let her dry.

Tip: Since the paint will be applied in several layers, it is very important that it is well absorbed into the tree.

Step 2.

Cover the first layer of paint. Very subtle, you can not try too much and leave not scratched places.

We drag the first layer of fine-grained emery paper. We clean from dust, but do not use wet rags in the process, sponges, etc. We wash only a dry cotton lounge rag.

Next, we appline the second layer of paint, also rubbing it. We leave to seek and wash a little again.

So repeat until the color becomes smooth, but a little rough. To do this, we used the matte paint with a vintage effect. A few days later she completely absorbed and dry and starts yellowing (pay attention to the instructions on the bank so that it was not then to repaint everything again). To avoid this, you can try this method of staining on a small and inconspicuous area. Start a complete color when the result will satisfy you.

If you bought new handles, check whether they are suitable for your color and screw into place. Golden brass carved pens with patterns with a white aged bomody.

Check the chest of drawers for compliance with your requirements - it's all the same comfortable, beautiful, and here is a paradox - modern. Vintage is now in fashion!

Wallpaper or film

Applying a film or any other paper coating to update the cabinet, it should be remembered that we use the cabinet every day. And usually such a coating is not long, but it is very simple.

Tightwork cloth

This is the most painful way to update the cabinet when the cloth is tensioned on the entire plane. The method is quite obsolete. But maybe someone will like someone.

Point painting for polished cafe

The point painting is perfect for polished cabinet. In this case, you do not need to remove the varnish and grind the surface. The technique is simple:

The drawing is applied using the marker.

In the marker, paint paint is made using points. Detail here.

Ideas for cabinet update

Sometimes not necessarily throw out the old cabinet. If the owner has a taste, then the subject can be given a new life. And how many satisfaction with the furniture renovated with your own hands! So that she really became the subject of pride, should be carefully learned how to paint furniture from chipboard at home. This knowledge will help cheap refreshing the appearance of the table, bedside tables, walls for the living room, bed, chest or tool. Tips for this article are universal for any items made of wood-chipboard.

The chipboard is a material that has a well-replaced tree. Knowing its properties will help clarify how to paint furniture from chipboard. So, here they are:

Strength - when exposed to external forces on the chipboard, there is a voltage opposing the process of destruction. The limit of this property with stretching is up to 0.5 MPa, with bending - up to 25 MPa. The strength of the material is due to the homogeneity of its structure;

Ease of processing - despite the substantial density, the chipboard is perfectly cutting, milling, grinding, gluing and staining;

The moisture content - even after drying, the chipboard saves 8% of moisture on average. So the correct coloring is able to isolate moisture and extend the life of the plates;

Moisture resistance - she has a slope slightly lower than wood, but high-quality plates can safely carry wet air bathrooms. This quality also depends on what material they are lined with. The best indicators of moisture resistance in chipboard, covered with plastic;

Fire resistance - chipboard plates are able to restrain the spread of fire and maintain the main qualities in the fire. To increase fire resistance, this material is impregnated with the compositions containing anti-epires. Good non-combustible paint is also able to strengthen this property of the material.

How to choose the right paintwork materials

The chipboard is excellent "friendly" with acrylic and latex paints, as well as with alkyd enamels.

Acrylic paints have weighty advantages:

Non-toxicity, they can be applied right in the apartment;

The foundation acrylic composition - water, so it can be diluted to the desired consistency;

Convenience: Neakkurat smears of such paint can be removed with wet rag;

Fast driedness. Slim layers dry in a few minutes, and thick - in two hours;

Rich palette of saturated, bright shades;

The coating is obtained by a water permeable and steamproof. Its color will not fade and does not fade under the rays of the sun.

Acrylic paints, well-proven themselves, wear Olimp, Helle, Triora, Parade and Ceresit names. Latex paints are water-dispersion enamel. They are good because they do not contain harmful substances and create a durable, wear-resistant layer on the furniture. Minus latex compositions - inability to resist microorganisms. In the wet premises on the painted surface, mold is formed. The most popular latex paints - Kabe, Dali, Sniezka.

Alkyd enamels are resistant to moisture, and therefore they can be used for the kitchen and the bathroom. Their disadvantage is the content in its composition toxic organic solvent. Apply such paint with caution. Alkyd materials smoothly fall, do not create lumen and dry quickly. Paint furniture out Chipboard better Total paint Tikkurila Miranol.

As for the choice of color paint, here you need to be guided by the requirements of the interior style. To give furniture, the effect of natural wood you can use a lacquer with a warm tint.

For the restoration of the surface of the chipboard, any above-mentioned means is suitable, but in the name of your own safety, the compositions with lead should be avoided.

Acrylic

Alkyda

Required programs

For the furniture restoration process, except for paints and varnishes, you will need:

Latex gloves;

Grinding skin (sandpaper);

Solvent to remove an old coating;

Degreaser-detergent;

Flannel rags;

Scotch construction;

Glue;

Acrylic putty;

Acrylic primer.

The last 2 material is necessary to prepare surfaces to staining. Adhesion working on the principle of adhesion creates a reliable basis for the subsequent process. Scotch construction helps when several colors are used in staining. It prevents them random mixing. With this "helper" you can even draw ornaments or geometric shapes.

Basic tools:

Brushes and rollers;

Putty knife;

Screwdriver;

Knives;

Dryer construction.

It is convenient to paint furniture with aerosol cans. In this case, you do not need to use the pallet, rollers and brushes. The stained object is better to upset the film like an awning.

It is important to buy high-quality brushes, otherwise the harsh hairs will spoil the work, remaining on the painted surface. For primer, you will need a thin roller. It also needs to be carefully checked. A high-quality tool has a firmly attached foam rubber and a stable handle. In addition, newspapers will be needed, plastic bags and cardboard - bedding to preserve purity in the working area.

Basic processes

No matter how "Hands screamed" rather to start the wonderful process of transformation, you can not immediately grab the brush. Otherwise, the new paint will quickly fit. To paint furniture from chipboard, it is necessary to approach thoroughly and, like all significant projects, divide this case to the stages. The more carefully allocate them, the better the final result will be.

Before repainting furniture, you need to prepare work. Any furniture processing is more comfortable to conduct, if you first disassemble the subject on the part. Therefore, you first need to dismantle all the accessories (handles, rollers, corners), then remove the doors (at the cabinet), remove the boxes (at the chest), remove the legs (at the table). The stained object must be the most disassembled. Metal parts can also be updated. To do this, they need to hold 24 hours in white vinegar. The substance dissolves rust. After that, accessories can be repainted with anticorrosion paint Zinga.

A. Removal of outdated coverage

Removal of the old coating is painstaking, slow work and the most difficult stage of furniture restoration. There are two ways to implement this venture:

Heat - with it, a construction hairdryer is used, heating the old coating before melting. The softened paint and varnish are easily removed by a spatula. Instead, you can use a burner or iron through foil. This method is especially good for old paint. Warring, it forms bubbles, and it is easier to remove it. It is also ideal for the floor, since after removing the old layer it can be painted immediately, without waiting for grazing, which reduces repair time;

Chemical (most effective) - Special reagents are used here. They dissolve the resins contained in the paint, and it is removed by the scraper. Funds are divided into volatile organic solvents and washes. The latter are pasty or liquid substances based on acids, alkalis or organic solvents.

Thermal

Chemical

The algorithm of action during chemical removal of paint is:

The tool is applied to the long-colored surface with a roller or a capronic brush in one direction;

It is maintained on the coating of a certain time specified in the annotation to the wash;

The softened coating is removed with a stainless steel brush;

The procedure is repeated if the coating consists of several layers.

After removing the paint requires surface treatment with sandpaper. It gives smoothness, which will facilitate the subsequent painting. Getting rid of the old layers should be completed by degreasing the surface with the help of detergent.

Apply a bow

We remove the spatula

Pull out emery paper

B. Primer and grinding

After the furniture gets free, you need to check it on traces of random mechanical damage. If any, it is desirable to close them with a special mixture. It is easy to cook it: you need to mix PVA glue with a shallow tree chips. Putty for chipboard is also suitable for smoothing irregularities. Next, you need to wait until the mask is freezing, and again to open the surface first coarse-grained, and then fine-grained grinding paper. The movements should be swallowed, and you need to move along the DSP fibers. The resulting dust should be squeezed with a flat brush.

Next follows primer. This process provides excellent adhesion (clutch) of heterogeneous layers, guarantees a uniform distribution of paint throughout the surface and reduces its consumption three times. In order to avoid rotting the material in the primer, you can add a hydrophobic additive. It will prevent the appearance of fungus, mold and will preserve the appearance of the renovated product for a long time.

The primer should be applied with a roller or brush, trying to completely impregnate the treated surface. One layer is quite enough. At the same time, the air temperature in the room should be more than 5 ° C. The soil layer on the surface of the product will completely dry through the day. Then it will be possible to start painting.

We apply a spacure

We process sandpaper

Apply primer

B. Technology Painting

It is advisable to put the processed object horizontally. This will eliminate the possibility of drills. Vertically arranged objects are recommended to paint from top to bottom. Only unidirectional brush or roller strokes will lead to a smooth coating. If the paint is aerosol, then before starting it is necessary to take a balloon half a minute. Apply the paint is better from the distance at 23 centimeters.

First applied the background layer. After drying it, after 30 minutes, the next one lies on it. In total, three layers should turn out. Hard to reach places ( internal angles, joints, convexities, concavity) best trends with a radiator brush having a curved handle. Paints (especially acrylic) over time are inevitably erased. Three layers of topping the lacquer will become excellent protection from this. Varnish should be applied with a sponge, according to the principle of the "stamp", but not "blank".

Laminate can also be painted. For painting of such a material, the following sequence of steps is used:

Washing dirt and degreasing - with this will help drugs that split fat. After the main wash, you need to rub the laminate clean water and wipe it with a dry cloth;

The transformation of the smooth coating in the rough - for this it is necessary to treat the surface of the fine-grained sandpaper. This is important for the creation of adhesion;

Primer - suitable soil on a polyurethane basis. On the drying of its layer should be allocated for 12 hours;

Alignment of cracks - Latex putty will cope with it;

Re-primer and drying;

Coloring - flooring from LDSP perfectly takes alkyd enamel. For laminate, it also suits;

Lacrification - varnish (anti-slip) is applied with a wide brush in three layers.

How to paint furniture from DSP at home - the question is relevant to creative natures. This is a more interesting and profitable process than the purchase of new furniture. To make the result, it is necessary to clearly know what to paint the chipboard. Choose suitable option And dare!

How to repaint a wardrobe from chipboard We will look at this article. After all, if the wardrobe from the chipboard became old and shaking, this is not a reason to throw him out on the garbage. Any wardrobe will look new, for this it is enough to just repaint.
Old furniture should not be thrown out if the problem is only in cosmetic repair, the fact is that it is often made of better and durable materials, unlike modern. Old cabinet with proper care will last even longer than new. And at the same time the price of work will not be significant.
The same applies to any other object of furniture of Soviet production. Painting is made around the perimeter of the cabinet. The whole instruction is set below.
All work can fully be done with your own hands. You can watch it on the video in this article and the photo. Performing work is done in stages, each stage is important.
Also should not forget about the preparation of the plane. From the quality of the performance of this work, much will depend not simply appearance, but also durability.
ATTENTION: It is worth noting that the material does not have such a great value. You can redo you can also paint wooden furniture, and from chipboard. The main difference of furniture from chipboard is that such a material absorbs moisture, so the process of complete drying will take much more time than the tree. In addition, the chipboard does not require large number Primers before painting, so it is much easier to get the necessary color.

Preliminary
Before you begin to paint the cabinet, you need to remove all removable parts - handles, loops, doors and drawers. Ultimately, only the frame should remain from the cabinet. The place where you gathered to paint the wardrobe must be well ventilated if there is an opportunity, it is better to work with paint in the fresh air.
In order to prepare the surface of the old cabinet to paint, you need:
Schucker with varying degrees of graininess;
Flat brush;
Unnecessary rag or sponge.

Attention: the brush is not so easy to apply a uniform layer. Therefore, it is better to use a pulverizer. Then you can make the most qualitative paint.

So:
First, with the help of a rag or sponge, you need to wash and / or clean the surface from the accumulated dirt and dust. After cleaning the cabinet from dust, you can proceed to removing the former layers of varnish and paint (see). Old paint is removed using a coarse skirt, the movement of the hand should be circular and squeezed. In order for new layers of paint layers smoothly and without roughness, clean the surface of the cabinet from irregularities.

IMPORTANT: Pull the surface neatly to accidentally, along with the remaining varnish and paint, do not erase the layer of veneer. You will have to tinker with the grout of irregularities obtained as a result of non-accuracy work.

Some details will need to be removed. Then the edge can be fringe. It will need to remove it. Otherwise, fasten back will be difficult.

We make stripping edges
When the surface of the cabinet is well processed by a coarse-grained skin, you need to acquaint dust with a flat brush. When cleaning the cabinet from dust it is impossible to use a rag, so the dust will only be born in microcracks on the surface and will not give exactly the paint.
Skin with small grains need to be treated by those sites that were not able to treat a large skirt. These are usually angles, edges, some protruding elements. Once you have worked well above the surface of a shallow skin, let's spend the cabinet with a brush again.

We make the processing of the plane
It is impossible to paint the cabinet in a dusty room, so the room should be well wash before painting. As it was already noticed earlier, dust can badly affect painting.
What paint is better to use
Many are thinking than painting a wardrobe from chipboard. To update the cabinet as it is impossible to suit acrylic paint on water basedbecause it has a lot of advantages.
The paint only needs to be dissolved with water to get the desired saturation of the color, in case of error it is easy to wash off and paint the plot again. Equally important when working in the room, the fact that acrylic paint has almost no smell. It is worth remembering, however, that after drying, acrylic paint acquires stronger properties, as water evaporates from it. This must be considered when painting in several layers.
It is not necessary to paint the cabinet with one color, because there is a whole surface for experiments. You can, for example, make a wardrobe with two-color, taking as the basis of a neutral color, beige, for example. And for painting parts you can use contrasting colors.
If the required color is not, you can add a kel in white paint. If the cabinet is designed for the nursery, then you can show more fantasy using stencils with images of flowers, animals and so on.
To choose the right shades, you can try to paint first small plot Cabinet, so you can understand what color it will be best to look.

How to primer
The process of primer before painting cannot be ignored, without it it will simply fail to paint the chest of drawers or a wardrobe.
The surface must be projected (see). The soil will not give moisture to absorb the surface of the cabinet, which will accelerate the process of drying paint. Plus, after the primer, the desired color will not lose, after drying the paint, it will remain the same as it was when painting.

ATTENTION: If you paint the surface without priming, then after drying, part of the paint is absorbed into the material of the cabinet, and the color may differ from the intended.

If you are going to paint the cabinet acrylic paint, then the primer should be chosen on the same basis - acrylic. The components of paint and primer will be remarkably interacting with each other, which will make the painting of the cabinet and other furniture better.
Acrylic primer is very easy to use. Before working carefully read the instructions for the use of primer. It is important to draw attention to the time for which the soil dries out, because the paint on the surface should be applied only after drying the primer. To buy the required amount of material, measure the closet surface before painting.
A special roller will suit the painting tools for the primer, try to apply as a thin layer as much as possible. When you finish the priming of its surface, leave the cabinet to dry on the time specified in the instruction.

What to choose a tool
Thinking as an old cabinet from chipboard paint, it is necessary to immediately worry about the instrument. As a rule, the choice is between roller and brush.
So:
In this case, it is important to take into account your own work skills and preferences.. But, nevertheless, it is practical to paint the cabinet with a brush. Unlike the roller, it can be applied to the paint to a more even layer, besides, the roller will not succeed in painting the angles inside and other hard-to-reach areas.
Specialized stores present a huge selection of various brushes and rollers. To the choice of the tool it is not less responsible than to choose paint.

ATTENTION: Buy high-quality instruments from reliable manufacturers, this should not save funds. From low-quality brushes can fall out in the process of painting, they will remain in the paint, and it is impossible to remove them after staining. For more easy work and convenience, it is recommended to purchase a set of brushes of different sizes.

How to paint cabinet
Now look at how to paint the cabinet from the chipboard. So, before painting, it is necessary to spin well, leave the windows open. If you can paint the wardrobe on the street, do it there.
The first layer should be the lighter tone that you chose. Make sure that the paint does not leave, for this, simply periodically dilute it with water when notice that it starts to stick.
The final color of the paint depends on the amount of layers applied. If you painted the cabinet with one layer, through it will be shone to the surface structure. It is good for the interior in the style of Provence.
To get a more dense coating, you need several layers of paint. Each new layer apply only after drying the previous one. Work with a brush only in one direction, so the paint will fall smoothly, and when it dries, its surface will be smooth.
If you decide to use the paint of two colors and more, the boundaries are worth sticking with painting scotch, so the colors do not mix each other when painting, if, of course, such an effect you do not need initially.
The cabinet dries completely in a few days, after which it will only remain to apply a transparent varnish on top of the paint. It is necessary to protect the painted surface. When the lacquer dries, you can collect all the details of the cabinet.

As you can see, with the help of brushes and paints, you can give a new furniture a new life, turning it into an updated and interesting subject of the interior, only by connecting a fantasy and a little effort.

Restoration of old furniture is an interesting option to update the elements of the interior and show your creative abilities. Not necessarily contact the furniture store or to the factory and buy new furniture. Showing fantasy, you can give tables, chairs, shelves an attractive look and a special highlight. The easiest and most economical option, how to update the old wardrobe - paint furniture using decorative paintwork materials.

Also for restoration can be used with wallpaper, decoupage, photo printing, photo wallpaper and decorative plaster. But what is the way to choose?

The easiest and most inexpensive way to update the wardrobe, lost attractiveness - go to wallpaper or photo wallpapers. Such decoration is suitable for the restoration of the wardrobe, bulletin, chest and bedside tables, which are installed in dry rooms.

The most appropriate is the phlizilin and vinyl wallpapers or Wallpaper, which are sold in construction stores.

The salary is partially or completely. How to update old furniture:

Wallpapers used for restoration should be distinguished by the pattern from those whose walls in the room are saved, but have a common style and color solution;

If the walls of the rooms are sealed with light canvases, you choose to update the old cabinet bright wallpaper. When in the interior there is a wallpaper with a pattern or pattern, the furniture is covered with monophonic wallpaper;

Registration internal shelves and external facades can be in different combinations. Additionally use new fittings. It is convenient to separate furniture by self-adhesive wallpaper;

To work, you will need a brush, PVA glue, a construction knife, decorative wallpapers. It is easier to glue paper cloths, but vinyl and flolymins are more durable;

The product is measured, the wallpaper is cut into stripes of the desired length, the glue is evenly distributed over the surface, the wallpaper canvases are glued, carefully smoothed the coating.

Before sticking, surface wallpapers are degreased with alcohol, acetone or gasoline. Self-tech is applied to the elements of the cabinet and smoothed so that air bubbles are not formed.

Application of bulk drawings

Decorative stucco and painting under stencil - interesting way Restoration of the old cabinet. Such a design will enjoy the furniture and give the surfaces with surface decor.

Suitable for making not only wardrobes and dresser, but also for restoration of kitchen furniture (servant, wardrobe for dishes).

The paint reliably protect products from temperature drops and moisture. It uses decorative plaster, acrylic paint, varnish, stencil with desired pattern, spatula, greasy tape, sandpaper, brushes. Cabinet painting with their own hands requires compliance with the exact work algorithm:

Furnished remove accessories.

Remove the layer of old coating.

Processing sandpaper.

Cracks and chips close up with putty.

Stencil fix paint scotch.

Prepare plaster according to the instructions.

Apply the material with a flat spatula.

The stencil is cleaned, the pattern is corrected by a knife.

After drying, the drawing is grinning sandpaper.

The renewed base is applied to paint.

To secure the effect is covered with varnish.

In the same way, painting the old cabinet under the stencil, but without decorative plaster. Against the background of the patterns, accessories stained with a gold or silver tint looks.

To get a contrast pattern, the product is covered with white paint. After drying, the layer is attached to the stencil and spray the spray-paint (pre-shake) the desired shade of the desired shade - the decorative coating is ready, and the furniture acquires an interesting appearance.

In order for the paint evenly covering the furniture and did not be peeled, cabinets, bedside tables, dressers, bonders prepare to paint, removing dust, dirt, fat stains.

As a basic background, you can use any shade, but the most expressive drawing looks when the cabinet under the stencil is painted in white.

Polished furniture coloring

The interior items made of natural wood and a polished layer coated can be given an unusual view using the paint for the cabinet. Old product, refined in modern design, It will become a central element of the room and give the room a special charm.

How to paint a wardrobe or ennoble Chiffonier:

To work, use acrylic paint with a matte effect.

For degreasing the base, acetone or white spirit is used.

For applying paint, you need brushes, and for decor - new handles.

From the cabinet remove the old fittings, get the shelves and drawers.

Process all surfaces with grinding machine.

For the tool, choose a large and fine-grained sandpaper.

If there are large chips on the surface, they need to sharpen them.

Treat furniture White spirit or acetone, dried.

How to paint the cabinet - the thin base layer of paint is applied.

After drying, it is poured with fine-grained paper.

Remove dust dry rags, the next layer is applied, dried.

Again rubbing and apply another layer until the desired effect is obtained.

With this method, you can transform an old polished wardrobe to the original vintage furniture, which will decorate the classic interior. Accessories are screwed into former places.

For exclusive work, you can use not full painting, and a point painting - the pattern of the marker is applied to the facades of furniture and draw a drawing acrylic paint.

Updating cabinets from chipboard

Furniture made of chipboard, over time, loses its attractiveness, as if carefully, it was not exploited. Return the products a beautiful appearance and make fresh paints in the interior can be used with staining of old cabinets from chipboard.

It is necessary to consider that the chipboard absorbs the paint, since the furniture is covered with a moisture-repellent laminated layer.

In addition, if the status of the fastening elements of the cabinet is unsatisfactory, it is recommended to replace the accessories and additionally enhance it. How to paint an old cabinet of chipboard:

From furniture removed all removable items so that a blank frame remains for painting.

With the help of coarse sandpaper, remove the old paint layer (if it is) and varnish.

Surface the surface must be carefully so as not to damage the base. The cabinet is driving a dry rag from dust.

Corners, edges, joints and protruding elements are treated with fine-grained emery paper.

Acrylic water-based paint - the best waythan paint chipboard. Color solution Choose to your taste.

Before the painting cabinet from the chipboard, it is necessary to predict that the paint is less absorbed into the material.

The soil is applied to a subtle uniform layer and give the composition to dry - usually acrylic primers dry up not more than 12 hours.

Multiple layers of paint with roller or brush (more practical brush), while drying the coating before painting.

When the furniture is painted for reliable fixation of the coating after complete drying, the cabinet made of chipboard is treated with varnish, collect the product using new fittings.

For painting of furniture, only high-quality tools are chosen, which do not leave the pile on the painted surface. The more layers of paint will be applied, the richer color will turn out decorative coating. It is necessary to repaint a brush in one direction - from top to bottom, the roller is applied with paint with cruciform movements.

On video: detailed instructions Upon updating the old cabinet from the chipboard.

How to update kitchen cabinets

The kitchen is a wet and frequently used room. Furniture in this room is exposed to temperature, steam, moisture and mechanical influence, so kitchen cabinets are more likely to lose its original look than living room or bedroom furniture. You can restore the old cabinet in the kitchen with the help of painting or finishing products with a rathant.

What paint paint? Acrylic moisture resistant composition or alkyd enamel. It seems to be an updated wardrobe with glossy glitter.

The order of dyeing of kitchen cabinets is:

Furniture preparation - Doors remove with loops, carefully cleaned from dirt, degreased, wash out with soda to remove all pollution;

Removing the old coating - All surfaces kitchen cabinet It is first treated with coarse-grained, and after - fine-grained sandpaper, wipe from dust with a dry cloth;

An acrylic or alkyd primer is applied with a roller or brush - Depends on the selected paint material. The primer is given to dry;

How to repaint a wardrobe? Substantly apply the first layer of paint using brushes or rollers. After drying, they apply a second layer with a painting pad longitudinal and transverse strokes;

When the front side is driving, you can paint the edges furniture parts and the inner part. When working on the pad is not pressed so that there are no drowshes;

If the resulting color in saturation and brightness does not correspond to the desired shade, the product is painted again. The use of white color is suitable for any kitchen interior. Furniture are collected using new fasteners and decorative accessories (handles, religions, moldings).

If, when disassembling the cabinet, difficulties arose with unscrewing fasteners, some oil can drip on the screws. And you can also smear the doors so that they do not creak.

Similarly, painting bullying, dressers, bedside tables, but it is not necessary to use water-repellent paint for them - oil, acrylic and alkyd compositions for internal works can be used.

To give an old cabinet an unusual look, not only painting, but also upholstery with cloth, decoupage, vinyl stickers, stained glass and other decorating techniques. In what cases they can be used to renovate the old cabinet with their own hands:

Closet. It usually mirror or glass doors. You can decorate furniture with a stained glass film or vinyl stickers. The decor is glued to the doors of the wardrobe.

Old wooden furniture from plywood and Fiberboard will be transformed if you use decoupage or artificial formation to upgrade, decorating furniture in retro-style.

An old cabinet for dishes can be created by applying the technique of applying decorative plaster or repainted furniture completely into white, using whitening paste.

Cabinet in a nursery. The child will suit the "cheerful", bright furniture, which is repainted by independently with a point painting with children's plots.

Cabinet in the living room. Uniquely looks furniture decorated with collage from photos. Beautiful snapshots stick on the cabinet completely or in some places and covered with colorless varnish.

Using your own fantasy and creative approach, you can upgrade the old cabinet and make it a highlight of the interior. Furniture will play new paints and become a central element of the room. To decorate the most unusual techniques, the choice of which will satisfy any artistic taste.

Master classes from specialists (2 video)

New life of old cabinets (33 photos)

Szafa Pomalowana Na Bialo I Oklejona Powiekszonymi Fotografiami. Wykonanie Iranzacja: Malgorzata Szczepanska