No matter how much cabinets borders, there are always sharply for storing all things. The necessary little things remain scattered throughout the apartment. And whatever efforts are you in order to decompose everything into place, the order in the house is almost impossible to achieve. And here on the aid can come hinged shelves made of fabric made by their own hands.

Fabric hinged shelves will not only help use each meter of room space, but also become a highlight in your interior.

Such shelves are an excellent place to store comb, cosmetics, books and magazines, children's toys. If your family has small childThis suspension design will serve for storing pacifiers, bottles, sprinkles and diapers. All you may need at any time will always be at hand. And if you show a little imagination, then such a shelf will easily fit into any interior and will become not only useful, but also a very stylish accessory. And you can create these little masterpieces with children. After all, classes of needlework together with mom is a useful and fun pastime.

Suspended structures

Pendant shelves are also called pockets. They really resemble pockets of different shapes and sizes collected in one design. Ideas for such shelves-pockets can be learned in magazines dedicated to design, or catalogs of large stores selling products for home. They present a fairly wide range of suspended structures for storing clothing, shoes, jewelry or carrying facilities.

Such pockets came to us from Europe, where they became popular 30 years ago and have not ceased to be fashionable since then. Naturally, because they have a lot of indisputable advantages:

Fabric shelves made from fabric, the perfect solution for the nursery will be the original shelf with bright pockets.

1. They can be placed anywhere in the apartment (bathroom, children's room, hallway).
2. Despite its small sizes, they are able to accommodate many things.
3. Hinged soft shelves do not occupy a lot of space. They can be placed along the wall, doors, inside the clothing cabinet, etc.
4. They are very easy to care for them. As a rule, such pockets can be washed in a typewriter.

But the shelves stitched in the factory have 1 significant drawback. They cost about as much as full-fledged furniture made of plastic.

Therefore, hanging shelves are more profitable to sew their own hands. To do this, you will need a minimum of sewing skills and quite a bit of time. Make this subject of the interior can be practically from anything. You will use multi-colored flaps (even the clothes that came into dissent), decorative braid, buttons, small soft toys and the like.

Back to the category

Materials and tools

Whatever the model of the shelves you choose, you will surely need the following tools:

The design of pockets depends only on your imagination, the main thing is to choose the right fabric.

• sewing machine;
• iron;
• large portno scissors;
• dispenser (can be replaced manicure scissors with sharp tips);
• pins;
• sewing needles;
• peretuzelnik (can be replaced by the flap of gauze);
• portnovsky chalk or a piece of dry colored soap.

As a rule, soft shelves are sewn without prior manufacture. All marking is applied directly to the fabric. That is, the paper does not need.

Some models require sufficiently dense walls that keep their shape. In this case, the lateral parts are cut in the form of a pocket, inside which is invested a piece of cardboard, cut in size. But the cardboard can be replaced with a non-brazed dense dublerin or "Fortorate" cloth. Then the detail of the duplicate fabric is cut in the same way as the main part, they fold together and descend. And hereinafter processed as a single element. Dublerin can be replaced by a gaze of the bandage, which is used when sewing hard lambrequins.

The suspended shelves for the bathroom must be from the water-repellent material, otherwise the raw tissue will cause fungus.

The choice of material for sewing the shelf depends not only on your flavors and preferences, but also on the purpose of this decor item. If you want to put the shelf in the bathroom, then choose fabrics with water-repellent impregnation. You are suitable cloak or sophisticated materials. You can apply the fabric that is used for sewing swimsuits or synthetic lycru. As a rule, such materials are bright, saturated, neon colors.

For the shelf, which will hang in the room, choose reliable fabrics with a dense weave of threads: Poplin, satin, coarse. If you make a shelf intended for storing a baby's belongings, then the wrong side of the pocket is also wiser to carve out of the fabric with impregnation. Then even liquid, accidentally spilled from the bottle, harm will not apply.

And otherwise the choice of materials and finishing is completely dependent on your taste. You can use almost any fabrics, artificial leather, fur. The main thing is to give the worst of your fantasy.

Back to the category

Fabric soft rack

Shelf, stitched in the form of a rack, the most convenient to use for storing clothes or bed linen, diaper. It is convenient to stay in a clothing or fitted wardrobe. It can be hung on the crossbar on which "Holders" are placed with the top clothing.

If desired, the "Stellage" compartment can be made multicolored. And external sidewalls complement the patch pockets. Then you will have additional storage space.

In order to assemble the shelf, you will need the following details:

The suspended rack can be performed in black and white gamma, adding suitable accessories.

• 1 main part, measuring 1160 * 1350 mm;
• 1 details of the upper and lower donkey - 1040 * 330 cm;
• 6 parts of the shelves - 520 * 310 mm;
• fastener bump - 280 * 320 mm.

For the manufacture of the suspended shelf, 3 m fabrics are needed (this parameter may change if you make your changes in milestone). For the main detail, it is wiser to take a very dense material. For example, denim fabric. If you want the lid and the bottom to be too tough, then replace the cardboard with a thin plywood.

Pictures in patterns are provided. From above and below the central part of the product, they constitute 2 cm, on the other cuts - 1 cm.

Back to the category

Sewing with a soft shelf

Spread the fabric face down. With the help of chalk, mark on it the details starting with the main one. The required dimensions are shown in the diagram. Rectangles, designated as ABVA and CDDs, are the side walls of the shelving. Accordingly, the lines of explosives and the SS is a fold of the tissue (the corners of the future shelf). Make the location of future shelves (line from Z 1 Z 1 to Z 6 Z 6). Put the main element, and then draw and take the remaining parts in size.

The hostesses loving needlecorating will appreciate such a device for storing small things.

The front vertical parts of the parts are subjected to an irrignee side to 10 mm width and pour, carrying a line close to the edge. Take the same way one side horizontal side of each shelf part.

Return to the main detail. Express horizontal sections (the width of the bending is 15 mm, internal bending - 5 mm) and increasing. On the placed shelf sewing lines alternately fold the main part of the front side and affect. This will facilitate the sewage of the details. Horizontal cut of each shelf to put inside the bend and stop with the front side of the main part, grabbing the shelves. Make sure that the line falls in 5 mm from the flap of the fabric. Start start and finish needed without reaching the angle (rack walls) 1 cm. In the same way, pick up the parts of the shelves to the side sides of the main element, having finished the line exactly at the horizontal seam.

Fold the bump in half, the front side inside. Still all sections, leaving small plot For turning. Remove the item on the front side, affect and squeeze the unclosed seam (it is best to do this manually). Cut the terminal to the edge, at one end, treat the loops for buttons.

Short sections of vertex parts and bottoms Remove on the wrong side (by 10 mm), affect and shoot in the edge. Fold the elements in half, the front side inside so that one short side you have fledged. The sidewalls are drawn by paving the line at a distance of 10 mm from the cut. Swiss allowances cut to a width of 5 mm. Remove the part, straightening the corners, and affect the edges.

Back to the category

Build construction

Position the upper and lower parts so that their fold is released on the facade of the rack.

Fabric rack assembly scheme: A - Merchant link; b - brackets (upper and lower); B - liner hard plywood.

Fold the long cover of the cover and the bottom with the rear wall of the main part of the front side to each other. Put the line, starting the allowance on the bottom and the lid. The bottom of the Punchka and the Covers are submitted.

Take together the long side of the details and the corresponding side of the main element. Get them together. Excellence Punches and covers, paint them, grabbing the base of the main part and the top layer of the tissue. Thus, pockets for duplicate elements are formed.

Cut the cover to the lid, sewing the buttons to the confined end of the end so that they coincide with the loops. If you wish, process and run the side pockets.

Billets from plywood Treat emery paper, rawlite corners. Insert the duplicate parts into the upper and lower element of the rack. Now the shelf can be hung on the bracket. Put the way through it and button on the buttons. Additionally, the shelf can be decorated with braid, lace, beads and brushes. If you want the shelves, too hard, then process them as well as the top and bottom item of the rack. Then put inside the rigid gasket.

Back to the category

Shelf for newspapers and magazines

For the manufacture of an original shelf, designed to store newspapers and magazines, you will need 2 wooden crossbars.

As a crossbar, you can take cornices for curtains. And holders for the eaves will serve as fasteners of this design. In addition, you will need the main and lining tissue. Its flow depends on the size of the shelf. On the above example, the length of the shelf is 1.5 m, and the depth is 0.5 m. When calculating the required amount of material, it is also necessary to take into account the allowance for inventing the crossbar. It should be equal to the diameter of the beam plus 2 cm on the free felting. Punches on all sections are 1 cm. And another 1.5 cm for squeezing the scenes. We get the following calculation:

For the manufacture of a tissue shelf for books, magazines and newspapers you will need crossbars from wood, brackets or holders for fastening and tissue.

The depth of the shelf + the girth of the beam + 2 cm + the allowance for the feeding of the scene + the allowance for the bending \u003d 50 + 15 + 2 + 2 + 1 \u003d 70 cm.

Thus, the height of the upper and lower part will be 70 cm, and the width is 152 cm (the main width + sweating of the bending).

From the main and lining fabric, take the details. On the front side, mark the allowances for the scene and it is appropriate. Fold the main and duplicate details of the front parties to each other. Still them around the perimeter on a width of 1 cm from the cut. Leave a small pass to turning in the seam.

Remove the item on the front side, carefully pulling the corner. Manually squeeze the remaining open plot. Connect the fabrics and shoot through the entire perimeter at a distance of 0.5 cm from the edge (you can use the threads of contrasting color). By laying under the clip, bend the fabric and dampen, forming a pocket. Hanging regiment is ready. It remains to turn the beams in the loop and consolidate them on the wall.

To do this, place the places for fastening and drill the wall by installing a dowel in the holes. Make sure that the nests are 1 mm less than a dowel. Fix the brackets using self-tapping screws. Install the beams with the shelf on them. You can build a similar shelf, but instead of making a loop, as described in the instructions for the shelving. If you create a decor for the children's room, then the case can be decorated with bright and funny applications.

We often face such a problem as a lack of space for things in the closet. That is why the necessary little things and other garardo items lie all over the apartment where there is a free place. This is not very ergonomically. How to be in this situation, is it possible to correct the situation? The answer is unequivocal - yes! We will tell you how to rationally use the space, but will help in this one little secret - Shelves from fabric with their own hands. In this way, you can sew a very convenient storage cabinet and even shoes. This indispensable thing is an excellent device not only for parents, but also for their kids who like to scatter their favorite toys.

Advantages of suspended structures

Suspended shelves are often called storage pockets. Externally, they are very similar to the pockets of different forms of sizes, equipped with a single design. On the Internet you can find a lot interesting ideas To create such a home assistant to store a wide variety of items - ranging from clothes and ending with materials for needlework. Such an idea came to us from Europe 30 years ago. It is from the same time that the suspended structures have become so popular.

Naturally, they have the most necessary advantages in everyday life:

• The location of their location can be absolutely different - bathroom, children's room, hallway, balcony, kitchen.
• Despite small dimensions, pocket shelves are able to accommodate a large number of things and other accessories.
• Suspended structures do not occupy the free space of the room. Most often, they are placed along the door, walls or inside the cabinet.
• Design allows you to wash in washing machine suspended shelves And cabinets when you need it.

Factory suspended structures have one significant drawback - a large price. They stand almost as much as the kit plastic furniture. That is why it is much more profitable to sew the shelves from the cloth with their own hands. For this you need only a few sewing skills and as much patience.

Important! Make such a product is not only from the new fabric. You can use the work, for example, old jeans, decorative braid, buttons, unnecessary soft toys and so on.

How to sew a mounted shelf of fabric?

Such a shelf is very convenient to use for storage of overall items - clothes, bed linen, baby diapers. It can easily be placed in the clothing cabinet, hanging on the crossbar with the rest of the things on the shoulders.

Important! If desired, each step of the rack can be made in different colors. And external side parts supplement very compact side pockets. So you free up a large number of space in a long crowded cabinet.

Materials

So, what we need to prepare:

• 3 meters of fabric (it is better to take a dense material).
• Fiberboard to create shelves.
• Narrow Corsa Tape or Tips for Tips (can be sewed from the fabric).
• Threads.
• Needle.
• Sharp scissors.
• Spindlers.
• Portnovo pins.
• A piece of chalk or pasture.
• Iron.

We recommend to take enough durable material for the base, which could withstand a possible load and not to break. Depending on what things and items you are planning to store in this design, use a three-layer cardboard or plywood as shelves. Such suspension shelves made of tissue with their own hands without prior manufacture of patterns. Therefore, all the measurements are applied directly to the material, that is, you do not need the paper.

Important! If you are planning to hang the shelf of fabric in the bathroom, then stop your choice on water-repellent fabric. You are well fit both cloak and sophisticated materials. It is advisable to use such material and for storing the baby's belongings, which often spills the liquid from the bottle, and not only.

Pattern

In order to assemble the shelf, we need to prepare such details:

• 1 The main part of 1160 size is 1350 cm.
• By one part for the upper and lower tier - 1040 by 330 cm.
• 6 parts for the shelves - 520 per 310 cm.
• Fastening putty - 280 per 320 cm.

Important! Pattern is given with all allowances. From above and below the central part of the design, we took 2 cm of additions, and on lateral cuts - 1 cm.

Sewing technique:

1. We decide the fabric facial side down on a flat surface. We draw on it with chalk items, starting work with the main one. As a result, we get 2 rectangular parts of the side walls of the rack, one detail of the rear wall and 8 parts for the shelves.
2. Measure the location of the shelves on the main long segment, and after - we draw all other parts in size and cut.
3. Turn and customize the front vertical edges of the part on the wrong side to a width of 10 cm, laying the line to the edge of the fabric. We proceed in this way one horizontal side of each shelf part.
4. Returning to the main part. We convey the horizontal sections (the width of the outer bending 15 mm, internal - 5 mm) and adjust. We fold alternately the main part of the front side along the placed shelf sewing lines, and then affect. Insert the horizontal cut of each shelf inward and stitch the largest detail from the front side. The line must pass at a distance of 5 mm from the bending of the fabric. It must be started and finished, without reaching 1 cm to the walls of the rack.
5. Handling previous actions, sew the part of the shelves to the sides of the largest tissue cut, ending to sew on the boundary of the horizontal seam.
6. We fold the bump in half the front side inside the fabric. Stool cuts, leaving a small hole for future turning. Soak item on the front side, root and sew not to the end of the closed seam by hand. We attach a bump to the edge. Send the loop at one end of the button of buttons.
7. We turn out short cuts of the components of the vertex and the bottom on the wrong side, they are roaring, we have grown the edge. We fold the details in half the outside inside, so that we have a fold on one short side. Step the sidewalls, carrying the line at a distance of 8-10 mm from the cut. Cut off the seams to a width of 5 mm. Turn the part, we are growing the corners and rooting the edge.
8. Now proceed to the assembly of the whole design. We have the upper and lower parts so that the fold goes to the front of the shelving.
9. We fold the upper cut of the lid and the bottom with the back wall of the main part of the front parties towards each other. We deposit the line, start the battery on the bottom and the cover of the shelving. We convert and drain the bottom of the bottom and the tops.
10. We take into the hands of one side and main side of the shelving and lent them together. We bring free sections of the bottom and the lid, then set them up, capturing the allowance of the main part and the top layer of the material. So we formed pockets for duplicate elements of the rack.
11. We feed to the lid, sewing buttons on the same level with hinges. We still processed and ran the side pockets, but it is at will.
12. Now we work with plywood. We process the blanks with sandpaper, spinning sharp corners. Insert the duplicate elements into the lower and top tier of the rack. Stick the shelf on the bracket. We throw a footer through it, and after - it is fastened to it on buttons.
13. We decorate the shelf with braid, lace and beads, again, if desired.

Important! If you want to make all the shelves rigid, then put in them the same rigid fane, as in the upper and lower element of the tissue cabinet.

Textile cabinet with their own plastic bottles

This is another option to sew the shelves from the fabric with their own hands. Sometimes buying a dear plastic wardrobe, we can find that our things or shoes do not fit there, and to do it, you have to deform your personal items. But why go to such sacrifices when there is another way out of the situation - the shelves from large plastic bottles. Such shelves are very convenient to use. Their depth allows you to store a lot of things and other items. Let's get acquainted S. step-by-step master class For the manufacture of shelves from fabric and plastic bottles.

To work, we will need:

1. The fabric of two colors with a size of 1m x 60 cm.
2. Plastic 5 liter flasks.
3. Threads under the tone of the fabric or contrasting.
4. Centimeter.
5. Scissors.
6. Double sided tape.

Important! Do not be discouraged if you have no bilateral scotch. It can be quickly made from usual. How? We now tell you about this in step by step instructions:

• We stick to the edge of the table the strip of ordinary tape. The main rule - the surface of the table should be dry and clean. Scotch must enter the table no more than 1 cm over the entire length of the sticky side. We leave the steel part of the scotch freely hanging in the air.
• We take for the free not glued edge of the tape and the sticky side outside, wrap it, sticking the free edge to the edge, which we glued to the table.
• Gently remove the resulting twist and cut it with parts you need.

Homemade bilateral scotch is ready! It is perfect and practically not noticeable when plastic bottles are connected and not only.

We sew the shelves from the fabric

Now consider the master class to create a fabric cabinet:

• We started with the fact that they took three 5 liter bottles and cut their upper part, which is narrowing. It is necessary to do the trim diagonally so that when connected we have one angle of inclination.
• With the help of two-sided tape, glue plastic bottles as close as possible, observing the same slice line.
• We start sewing a contour case for our shelves, which will decorate our homemade design. The case will consist of an external and inner side, since we took transparent plastic bottles.

Important! If you find colored flasks of this volume, then the inner part is not necessary.

• We cut out the external and inner part at the same scheme: one middle part and two side. The width of the central part is equal to the width of the bottom of the plastic shelves, and the length is the distance from the edge of the upper shelf to the bottom of the lower.
• Pattern sidewall is very simple. We put the connected plastic shelves on the fabric and supply their contour. It turned out the rectangular parallelepiped, which will become our sidewalls.

Important! Do not forget to make several centimeters of stacks on the seams.

• Connect the vertex parts and lining parts. Sedupply seams. Insert the lining inside the outer part of the cover and, using the iron, prepare them to the connecting seam. Try to start the bending so that its upper part of it leaves 0.5 cm for the inner bending. So we will create Kant around the perimeter of our cover.

We very much hope that our article helped you to sew a textile wardrobe with your own hands. Your attention was presented the best lessons for creating such a wonderful design. Let the world always reign in your house, order and harmony!

Shelves are often used not only for supplement and decorating the overall interior room, but also for a clearer and appropriate organization of space. Thanks to their use, the apartment owner gets the opportunity to conveniently arrange a huge number of small things that are simply lost in the closets.

Today, the market presents the mass of various models that are made of different materials. They differ in the design.

You can choose not only products with classic design, but also ultra-modern designs.

But more and more, people prefer to make such interior details independently. Asking how to make the shelf with your own hands, they reread the lot of literature and browse many directories.

However, this does not mean that independent manufacture The shelves are distinguished by complexity and it is not able to a person who does not have special skills. No, it is completely wrong.

Familiarization with literature in this case is necessary in order to create a product with a beautiful design that will fit into the overall interior. Consider in more detail what the shelves are.

Varieties of the shelves

Any specialist will tell you that before proceeding to the creation of the product, it is necessary to decide for yourself, which design you want to get and whether it will be combined with the interior. And only after that you can start creating the product.

After all, for the house, decorated in a classically weathered style, is completely unacceptable to use trendy and modern shelves. They will look extremely ridiculous.

The most popular and widely known fond of the shelves is a classic shelf. Due to the fact that it is quite simple to install, but appearanceThanks to simplicity, it seems exquisite and sophisticated.

Used success and open, closed shelves. Closed products are most often used for decorating and installing indoors decorated in more. modern styles. For their design, glass and sometimes plastic are used.

The open designs can be used both in houses designed modern and apartments with classic design. Over the past few years, this kind of shelves have become enormous popularity and therefore gradually displaces classic options.

IN small rooms Quite often you can see corner shelveswhich have a special way of fastening. They are mounted on the adjacent walls that are adjacent to each other. Most often they are used in bathrooms, kitchens and subsidies.

In addition to the above, shelves, which are attached to the wall, there are suspended and outdoor structures. Suspended shelves are mounted not quite in the usual way.

They are installed using cables and vertical racks, and fasten directly to the ceiling. Such a fastening looks rather unusual and original.

The outdoor designs are most often used in the hallways. After all, it is precisely the floor shelves for shoes made by their own hands, not only look beautiful, but also help you organize the space of a small hallway. At the same time make them quite simple.

How to make a simple shelf?

To create a declared product, you should prepare in advance or prepare some tools and materials. You can use what the connecting elements you can use what is more suitable for you. But the most popular are the usual self-tapping screws, brackets and dowels.

Note!

For example, take the photo shelves with your own hands, which is presented below. It depicts a product with such parameters: width 250 mm, height 300 mm, length 1100 mm. The manufacturing process for convenience will be divided into steps.

Stages of work

At the first stage you need to mark the markup. To do this, you should put the boards on the table or any other smooth surface and move the measurements with the drawings. Side walls should have an altitude of exactly 268 mm.

This markup is optimal because, the side walls will be located between the two parts.

In the second stage it is required to produce board boards. For cuts to get smooth and neat, it is necessary to use an electrolovka. After cutting, you will succeed 2 sufficiently long blanks and 2 shorter.

In the third stage, you can proceed to the processing of the obtained billets. The resulting segments should be covered with a special protective varnish or verses, pre-polishing them.

Note!

In the event that you only plan to paint the shelf, you can do the treatment with the usual antiseptic primer. So you will increase not only the service life, but will achieve a more uniform paint distribution.

At the fourth stage of the manufacture of a wood shelf with their own hands, you start directly assembling it. The bottom board should be laid on a flat surface. From the end of the workpiece, retreat 8 mm and spend two lines parallel to cut.

They should be noted 2 points with a distance of 5 cm from the edge. In the noted points you need to drill holes for the screws. With the second workpiece it is necessary to do the same manipulations.

After that, you should install lateral blanks on the bottom segment of the board and secure them. As soon as you finish with the mounting of the side panels, proceed to install the top panel and securing it.

At the fifth stage, the brackets should be fixed on the ends of the side panels, and in the wall there are several holes for dupels. After that, screw the screws so that they protrude 5 mm. And here is your shelf ready.

In the same way, you can make acoustic shelves and acoustic shelves, but you need to take into account the size of the equipment itself. Measurements should be performed carefully, because if you make a mistake, work will have to start again.

Note!

Photo shelves do it yourself

Textile shelf. In my case, to store the shoes used in the closet. Fabric flap was used, the remains of old jeans. Shelves are sewn as pockets. In the shelf for stiffness inserted two cards sliced \u200b\u200bfrom those boxes in which this shoes lay.

Pipe mounting system.

The horizontal stripes sewed in the middle of the shelf and the shelf in the middle shelf, it turned out something like loops. It can be placed in the scarves and just close all the "good". At the same time and scarves are kept at hand. What also turned out to be very convenient.

And now a master class, which is somewhere I was scanned. True, I still changed something. For example, Plywood - has become cardboard, the size has also changed. The shelf I attached to the pipe x / please. My shelf is less, but in this embodiment it is quite spacious.

You will need: 3 m strong
decorative or denim width 140 cm wide; 3 buttons with a diameter of 2.5 cm; 2.
Leaf glued plywood 4 mm thick 49x30 cm; Portnovo chalk. Description
Work
Cutting (sizes in size taken into account: 2 cm
Upper and lower sections of the main part, 1 cm for all other cuts):
a) Main detail 116 x 135 cm
b) donyshko 104 x 33 cm
c) Cover 104 x 33 cm
d) 6 shelves of 52 x 31 cm
e) Path for hanging 28 x 32 cm

According to the scheme on the invalid side of the main
Details Place the portno small levels for the Z1 - Z6 shelves and flex line
B-B and C-C \u003d future angles. Front sections A-A and D-D twice showy on
Announced side to 1 cm width and touched. One short (\u003d front)
Side of each shelf perform similar bending. On top and bottom
Parties main details A-D Slices to turn on a width of 0.5 cm, then unscrew
On the wrong side to a width of 1.5 cm and touched.
On the marked lines (\u003d stroks) main
The detail is folded with the invalid side inside and the bends are affected. Then longitudinal
The cut of each shelf is paved along the inner seal and the front side of the fold
Shot at a distance of 0.5 cm, grabbing the shelf. Stitch finish without reaching
to the corner of 1 cm. Similarly, the shelf is filtered along the second longitudinal and rear
short sides. Path to hang up fold in half (\u003d 28 x 16 cm) facial
side inside, cutting cuts, leaving a small plot for turning
Open. Detail to turn out, the edges of the root, the open area is manually sewn.
Patu on the edges Shot in accordance with Places to take out 3 loops and sew buttons.
Short Cut Punction Double Double
the bending width of 1 cm. Detail folded in half the front side inside (one
short side - fold), side cuts stack at a distance of 1 cm. Powder
Seams cut to a width of 4 mm, the detail will turn out, the edges are affected. Rodyshko (fold \u003d
front edge) folded with the invalid side of the main part and dangle to the edge
Pogs along the line A-B, aligning the side seam with it (seam allowances \u003d 0.5 cm). By
Lines C-D Dunvyko to fit similarly. On the back of the main part of
The lines in-q to catch only the top layer of the bottom. Cover do the same
donkey. Shot to the top layer so that the fastener is on the side.
When applying the cover on the back side to grab only its bottom layer.
Edges of plywood parts well handle emery
paper and, rounded corners, put in double donyshko and lid. Shelf hang
On the pack to the bracket.