An important subject for the dacha and just a garden area is a garden bench with their own hands, the drawings of which can be found on the net. Although it is possible to produce it according to any suitable schemes, including those made independently. The benches can be made from various elements and parts, including sweater materials, and are much cheaper compared to ready-made and purchased options. And they look much more original and more attractive.

There are quite a few different schemes and drawings of benches with your own hands, each of which is suitable for its own. By the installation method, they are divided into three groups:

1. Stationary modelsinstalled in a permanent location and having a foundation base;
2. Foldable optionswhich can be folded and moved. Most often these are ready-made purchased options, although it is possible to make them manually;
3. , best suitable for children.

Considering the various materials for such benches, most often preferred wood and metal. Sometimes a stone is selected for this - although it can only be used if there is an appropriate design of the cottage. And, if desired, even wooden stumps, brices, pallets, or. It is necessary to select a specific option depending on its tastes, the availability of suitable parts for the manufacture and creative abilities.

Benches for the cottage from metal and wood

Deciding to make a bench for giving with their own hands, first of all pay attention to options with a metal frame. Their feature is increased strength, durability and possibility of use in all conditions. Although for ease of use, bench should use:

• anti-corrosion coatings for metal protection from;
• additional details for seating and backing from other materials (most often - wood or plastic).

In the manufacture of a bench completely from metal - for example, from wrought elements or metal grid She will weigh much more. In addition, it will be uncomfortable to use it in the heat and in the cold. Therefore, the combined design using wooden elements can be the best option. First, because the wood looks better than other materials (especially if using larch or oak). And, after processing with paint or special varnish, it can serve a lot longer, not exposed to fungus, mold and sun rays. Another reason to choose for the design of a garden bench is the tree is the ability to harmoniously enter this material in, in contrast to the use of stones and plastic.

Photo benches do it yourself from stone

Stone garden bench with their own hands, whose drawings can be even simpler compared to wooden and metal structures. In addition, the stone is the most profitable material. Most often, it is not necessary to buy it at all - suitable elements can be found on the territory of their own dacha. Among other advantages, stones are worth noting:

• long operational period - stone shops are able to serve dozens of years;
• reliability of the resulting design, which is almost impossible to damage. And there can be no precipitation or temperature differences;
• the ability to fit perfectly into some types of landscape, becoming an excellent addition for other stone elements.

In the absence of territory, fountains decorated using such beams, or install it is undesirable. Although other buildings can add them, during the construction of which similar materials were used. The shops in the ensemble with and, the foundation of which is made using stones, or with the help of stones, is advantageous. And one of their few drawbacks is the problem with the manufacture of the back, which is missing for all.

Photo of garden benches with their own hands from girlfriend

You can not only from the finished boards, but also from more accessible and existing materials available, saving and time, and funds. It was after the choice of such an option on the summer site a product may appear from the residues of building structures and even cut trees. So, one of the drawings provides for the manufacture of a bench from the stumps, easy to handle and looking naturally treated trees.

The design of such a product may be as follows:

• a pair of cut bases of trees serves as supports for a bench;
• for the back and lower crossbar applied pants;
• the seat is made of part of the trunk.

For the manufacture of such a bench, it is enough to have a circular saw and certain woodworking skills. If they are lacking for the seat, the same stiffs can be used or. After the manufacture of the bench is covered with varnish and it looks even more profitable for the finished option.

Ideas of garden shops and benches do it yourself

Any wooden bench with your own hands is made by definite drawings. But, if the simplest options provide for the design of the product consisting only of supports, seats and backs, more complex options may also include such elements:

• boxes for placing toys and inventory;
• forged parts that perform the role of decoration;
• wooden speaking as a support.

If desired, the bench can be manufactured with or without armrests. And can also have several backs, acquiring the type of double or triple chairs. And even get a non-standard rectangular, but a curved or polygonal form - this option is often used for benches and shops in or around a tree.

Bench with storage box

For assembly sad benches With my back, you will need not so much time. Whereas among its advantages, you can call the creation of an additional place to store things. Inside such a bench, children's toys are often stored, eliminating the need to use special cabinets or boxes for this. And sometimes a bench with a box installed in the garden is used to store garden inventory.

Choose a product suitable for size and color landscape. Especially since such functionality will increase the cost of a product that is faster and more profitable to make it yourself. This follows:

1. Find materials, which are most often used wooden boards;
2. Make the side parts, the walls of the box and the seat, using self-strokes and metal corners as fasteners;
3. Cover the outer part of the lacquer bench;
4. For ease of use, lay on the seat of a wooden bench - or sew the surface with a cloth.

The product is suitable not only for the garden or cottage plot, and for . And among its advantages, it is possible to name a simple manufacturer that does not require special skills and tools. In addition, boxes in such a bench can be located under the seat, and inside the side supports. And the inner part can be divided by half - with separate seat lids.

Production of a simple garden bench with their own hands

Collect a simple bench with your own hands from the tree with minimal time and money costs may not even be too an experienced joinear or a person who has never engaged in the manufacture of furniture. The main stages of such works are as follows:

1. Preparation of materials - boards, the total width of which must correspond to the size of the bench, and two wooden boxes or concrete torms;
2. Installation of supports and, if necessary, their fixation;
3. Installation of the seat with the help of corners;
4. Grinding the bench surface using sandpaper.

If there are drawers on the sides of the bench, they can be used as vases. To do this, the Earth falls asleep inside, and decorative plants are planted. It looks good and asymmetric option - when on the one hand there is a built-in improvised mini-flower bed, and on the other hand there is a normal support.

How to make a cottage bench with your own logs?

It is not bad in terms of practicality and time making a solution will be a garden bench made of logs, for the manufacture of which materials will be needed:

• the trunk of the tree, which will be used for the seat, and for the legs;
• the second trunk of a smaller size, from which the back is made;
• pins and self-tapping screws, with which elements are fixed;
• circular saw and drill.

For the manufacture of a bench in each of the details holes drill. They are installed pins, fastening parts of the structure. The product is additionally strengthened by self-draws. And for the convenience of use and enhance the operational period, polished and covered with varnish. The disadvantage of such an option is the need to use special tools, plus - almost complete lack of waste. Wood residues can be spent on the heating of cottages or cooking on wood stove (optimal option for cottages), and even make another garden furniture.

Garden benches with your own hands in an ethno-style

One of the most fashionable currently of garden furniture can be a Rustic Style bench (analogue of the American "), which can be perfectly fit into the surroundings of the cottage or. For its manufacture, the materials of two types are used - practically untreated wood, with the remaining bark, or ordinary boards and a bar. It is advisable to use curved and rounded parts in the manufacture of such benches. Even the boards from which the back will be manufactured must have a slightly rounded shape.

The bench in an ethno-style looks good in the ensemble with a wicker hedge. Especially if you make the back of this garden furniture using weaving. This will require a certain skill in the location of the branches (between which, in contrast to the manufacture of baskets, the gaps should remain), but the result will exceed all the expectations.

Details of gardening furniture with carvings are suitable for the landscape made in the Moroccan style, for which natural materials and rounded shape are characteristic. Bamboo elements are perfectly combined with the Chinese style of the plot. And low double benches - with the Japanese style of the garden and at home.

Drawings of benches for giving with their own hands: photos and features

In order to make a garden bench with your own hands, the drawings are needed. Even the simplest designs consisting of a back, legs and seats require measurements and layouts of the holes - this preparation will allow you to get even and attractive to the type of product. If the scheme of the bench is more complicated, it will take some time on the manufacture of drawing, given all the details and sizes - from the height of the supports to the width of the armrests.

Double garden bench with your own hands drawings

A classic drawing of a wooden bench with a back for accommodation 1-2 people consists of such elements:

• design pattern;
• brief assembly scheme;
• sizes of bars for support and boards for the back and seat;
• schemes for fastening legs that can be installed on a constant foundation or do not provide for fastening to the base.

The drawing is not posted, due to the presence of direct lines on it. In addition, it is not necessary to consider the load on the foundation, in contrast to more hard structures. And, if desired, dozens of already ready-made variants of double products are easily on the network.

For the manufacture of the simplest benches with a back of the tree with their own hands, you will need 120-140 cm boards and a thickness of at least 30 mm. Such dimensions are quite enough to accommodate two people. You will also need 2 pins for the back of a length of at least 40 cm and two more - for supports on which boards will be laid. The diameter of the reference elements can be any, but the optimal option will be approximately 65-75 cm. In addition, there will be needed boards for the back, the length of which corresponds to the log parameters for the seat, (electrical or chainsaw), drill and 12 screws of 10-15 cm long.

Important! When handling the saw, security rules are required. And, if there is no skills to work with such a tool, it is worth or seeking help to a more pilot master, or choose another design option.

Bench for garden cottages with their own hands

If we consider the process of manufacturing garden benches in more detail (which may be needed for a person who has never fulfilled such work), the main steps can be reduced to the table. With the help of a table form, even the owner of the country area, having nothing to do with the woodworking and the furniture assembly, will be able to collect a decent on appearance and durable design.

Table 1. Assembly instruction for simple wooden shop

P / P stage number	Description of the technological process	Instruments
1.	Fitting boards on the size of the shop or the purchase of already ready-made elements with the same parameters.	Saw or Lobzik
2.	Treatment of wood and ends, which are attached to the rounded form	Emery paper, file
3.	Select an angle of tilt rear supports. To do this, the boards are taken with a length of 0.7-0.9 m and the mark is raised about the middle. Part of the board at an angle of 20 degrees is cut from one side.	Saw
4.	The connection of the front and rear supports, the distance between which should be at the level of 270-300 mm.	Self-tapping screw, screwdriver
5.	Connection of boards for the back and seats with supports. The gap should be equal to 15-20 mm. And the distance between the edges of the back and the seat is about 20 cm.
6.	Coating the surface of the bench varnish.	Brush, varnish

Garden bench do it yourself from progress materials

The budget version of the garden furniture can be a bench with their own hands, which can be easily found on the network. For its manufacture, so-called Euroallets are suitable, different from the usual EUR marking. The width of these elements is greater than the standard for the bench, so the pallets are desirable to make a little smaller in size, shorter, for example, up to 60 cm.

Among the simplest variants of the bench from Pellet are distinguished by three:

1. Structures of 4 palletsThree of which act as a basis, and the fourth serves as a back. The euroallets for the back remove part of the bars, and the rigidity of the bench is strengthened by a wooden rail;

1. Benches of 4 cropped pallets. The back is fixed using ropes, and wallpaper nails are applied to design;
2. Products of just 2 pallets, one of which remains the whole, and the second is cut. In the design, the wheels are used, which allows you to move the bench.

The advantage of using the Europallet is their favorable price. If desired, they can be reached almost free. However, due to the standard and not entirely suitable for benches, this material is a bit limiting creativity. And it can also be supplemented by boards, and other elements to enhance the design and give it a more aesthetic species.

Drawings of a garden bench with a back of a tree with their own hands

Standard technology of manufacturing a bench-transformer with their own hands is quite simple and will not require a lot of time to assemble. And the result of the work will be a set of 2 benches and tables that are easy to decompose and assemble back to save space on the plot. Stages of manufacture of one of these structures will be approximately as follows:

1. Drawing preparation;
2. Choosing materials. For a bench transformer, you can take conventional boards with a size of 3.5 x 12 x 600 cm. You can also use five-meantimeter rails and boards 120 mm wide for the table top;
3. Cutting bars for legs of shops and tables and manufacture of holes at their ends;
4. The manufacture of cuttings with a diameter of 20-22 mm, with which the design will be folded and folded;
5. Steering processing;
6. Assembly individual elements In the finished design with the help of fasteners - screws and screws.

Now it remains only to paint the resulting transformer shop. And after drying the paint, set on the moving parts of the hinge. To enhance the performance characteristics, it is recommended to cover wood with varnish.

Garden bench do it yourself: Photo of successful homemade

Taking a decision on the arrangement of its country or, you can choose for the manufacture of benches and bears dozens different options. And use for their manufacture various materials - from purchased to those who were at hand. Often such homemakes are not only not inferior to factory products, but also surpass it, if not for strength, then for aesthetic characteristics.

Due to the fact that such structures are most often located on the street without, one of the main points in the manufacture is mandatory processing with special materials. For metal, it is paint, for wood - impregnation and varnishes. While the color bench, its size, materials and style are chosen exclusively in accordance with the taste and capabilities of the owner of the site.

You may also be interested in:

To garden plot It was comfortable enough, it should be equipped correctly. An important component is garden benches. They can be made independently different ways and from various materials.

Bench of concrete slabs and backrest boards

Looking at the drawings of the benches, you can find out the features of its device. You can make this design with your own hands relatively easily, quickly and without high financial costs.

Making a bench with your own hands in step by step instructions Described very detailed.

Assembly: initial stage

After preparatory work Suitable timber processing time. In order to make your own hands, the bench served for a long time and decorated the plot, the materials need to be handled.

Tree cover antiseptic compositions And they give to dry. After that, you can get to the collection backs.

On one of the two-meter boards, die from the edges of fifty centimeters. At this level will be the edges of Beton plates. From this mark, fifteen centimeters are measured to the center of the board. The first boards will be attached here. From the resulting marks, I dwell seventeen and a half centimeters - the gap between the backrest boards. Next, measure fifteen centimeters for two more boards. Between them should remain the gap of five centimeters. All this can be viewed in the drawing.

On the sections of fifteen centimeters, adhesive for wood is applied. The boards are applied to them, whose length is sixty-five centimeters. Additionally, they are fixed with self-draws.

From above between the backing board, pieces of seventeen and a half centimeters are glued. In order for the details well, they are clamped and maintained before setting glue. After completing gluing the back is covered with an antiseptic.

All wooden parts can be covered varnish. This will give them additional stability and attractiveness.

Assembling the main part

Collect the bulk of the bench is better from two sides. Concrete slabs are put between the boards, and threaded rods M16 fifty-five centimeters are inserted into the drilled holes. They will need four pieces.

Fastening the rod is performed by nuts and washers M16. Spin them simultaneously from different sides so that the bench turns out to be smooth.

Simple bench do it yourself

You can make benches for giving with your own hands fast enough if you follow the instructions. Consider four versions of such garden structures.

On the drawings Benches detail all its features are indicated. Make this bench with your own hands is quite simple. The only complex element is a concave seat.

The number of parts and their dimensions are listed in the table.

Begins the manufacture of a bench with her own trees from billets Required parts. Boards and timber are cut into parts of the desired length.

A somewhat harder will be the manufacture of supports for seating. It will take on the blanks to mark the markup. On the edges, there are two points at a distance of seven and a half centimeters from the bottom side, and in the center point at a distance of four and a half centimeters. They are connected using a flexible plastic line and cut out electrolzik. Slices are treated with sandpaper.

Supports of seats are attached to the top two tsargam. One with each edge and one in the middle. Next, fasten the supports that are extremely on the width of the legs. All connections are performed by self-draws.

To the resulting basis attach boards seats. Hats of selflessness are desirable to deepen.

Then attach legs. They are attached to the supports of the seating. Lower kings help the legs.

The finished product is covered antiseptic And varnish.

Simple bench number 2.

To make such a garden bench do it yourself, you will need concrete flower companiesand boards. Flowerits are required to create the base bench. Use two with a rectangular base and two cubic.

So that the base was stable, flowermen should be glued or combined from the inside with brackets fixed by self-draws. A layer of drainage and soil falls asleep in the tank. It increases their stability.

Seat for benches make from the board. For this, they are cut into segments of the desired length. These billets are laid so that they are the distance in half acetimeter. Then they are connected using transverse slats. Planks are located in three places: along the edges and in the middle. Corn plars are fixed. With their help, the seat will be fixed on the flowers.

Bench with your own hands

The details of the benches indicated in the figure are harvested. They are treated antiseptics Before connecting.

Then the supports are collected from parts. Pre-curl the corners and shoot chamfers. First, the bolt join the parts A and B, and then B, C and D, too, using a bolt.

The tilt of the back is determined by the Detail D, after which it connects to the part A. is similar, but another support is manufactured in the mirror reflection.

After that, the back and seat are collected. For this, supports put so that between them was the distance to the meter of twenty centimeters. To the supports, first screw the front and rear strips, then all the others, and at the end they screw the stops.

At the last stage, the back of this bench is screwed.

Bench No. 4.Another option is a simple bench with your own hands. Its length is one hundred twenty centimeters. Height from the ground to the seat - fifty centimeters, the height of the back is also fifty centimeters.

The base is manufactured from board, the thickness of which is five centimeters, and width from ten to twelve. One of the legs continues and is the support of the back. Supports are connected by the method in "Pedderv" and are attached to bolts.

The base for the seat is a bar, fixed on the self-tapping screw. Short supports on the back of the bench join the colangua to increase stability. The seat and the back are squeezed by boards with a lesser thickness. The surface is stained or covered with varnish.

Simple bench with a back for the country area

Dimensions of construction and wooden parts can be seen on drawings benches. If we consider how to make a bench with your own hands, this option will be the most optimal in the simplicity of the process and the result obtained.

Materials are better to purchase already cut-out in size. If there is no such option, then you need to cut them yourself.

Received billets grind. The ends of the boards are treated with electrolabank.

The rear legs of this simple bench with their own hands are simultaneously both support for the back. To create the desired level of inclination, the blanks are placed.

At an altitude of forty centimeters, the place of attachment mark sitting. Above the board is cut at an angle of twenty degrees. Sections on two billets should be the same.

First collect legs Benches: The front is connected to the rear with the help of a bar. It is better to do on top and bottom.

When the side parts are collected by them can be combined between themselves the seatboards. Screw the boards with self-draws, leaving the distance to one or two centimeters.

To enhance the design and increasing its stability makes the lower putting Bar with legs. Two boards are fixed for the back.

Complete work finish coatingwhich will protect the product from moisture and unfavorable conditions.

Pallet bench do it yourself

Make a bench do it yourself from pallets easy if you connect fantasy. To do this, you will need three or four such wooden designs. Some will need to cut to get additional details. The simplest design of the bench do it yourself from the pallets, when two pallets are attached perpendicular to each other, creating a back and seat.

In order for the design to be too cumbersome, it is better to trim the pallets on the desired size. Basin elements with self-draws. Add side parts, reinforcement and make legs. All this can be seen in the photo.

Since the material of the pallets is untreated, grungy, it will be required to be pre grind. This will make it possible without the reflection.

The manufacture of the bench is completed with their own hands from pallets with varnish or paint.

Bench puzzle

You can make such a bench with your own hands if there is a wide board and cuttings for shovel. From the board, curly seats are cut in the form of puzzle details. They attach legs from cuttings for shovel. Separate stools are obtained that are quickly collected in one long bench. All stages of manufacture are considered in detail on step-by-step photos.

Benches from unnecessary chairs: two options with their own hands

First option

To create such a bench for giving with their own hands, you will need four old stool.

C two first chairs remove Details from the front side of the seat.

At the remaining scam The front legs are slightly lower than the design of the seat.

With the resulting details it is necessary remove Old varnish or paint. For this purpose, a special means of solvent painting coatings are applied to the details. Then the softened layer can be removed by a spatula.

In the racks follow drill Holes for dowels. Holes are required on facial and end sides.

Dowel is lubricated with glue and insert into drilled holes.

When the dowels are sticking, you can collect base benches. In order for the design to be durable, the parts are fastened with self-draws. Design surface sands.

For sitting Benches choose a board suitable for sizes, unnecessary scolded.

If several narrower boards are used, then they are glued with joinery glue. For a dense compound, they are clamping with clamps and wait for the drying of the glue.

The finished seat is glued to the base with joinery glue. Heavy items are made on the board and clamp it together with the base of the clamps.

When the glue dries, the seat is closed with painting scotch and collapseother paint design elements for wood.

Scotch take off and the seat is treated morilka. Finally, the entire bench is covered with varnish.

Second option

For the manufacture of a second garden bench with their own hands from old furniture It will take two stools. It is better if the back and the rear legs are not separated.

Two identical chairs clean All parts of the design except the rear legs with the back.

Take brucki The width of five centimeters and three thickness. Two parts are cut, equal to the length of the width of chairs, and two segments of such a length, which will be the finished bench. Of these four parts, a rectangle is collected. It is fixed on the backs of chairs with self-draws.

Similarly collect another framework. Several transverse planks are fixed on it. This design is fastened under the seat, makes a bench more reliable and plays the role of the shelf.

If there are chairs old coat, then it is removed by sandpaper. After that, the surface is put off with a special composition or covered with primer. When the layer is driving, it must be glued with fine-grained sandpaper. In conclusion, the design is covered with paint.

Seat for a garden bench do it yourself from Chipboard or plywood. A rectangle is cut out of the selected material, which is greater than the base on the half-meter on each side. Then cut a piece poroorone With the same dimensions. A rectangle is cut out of the upholstery fabric. It should be more than five centimeters on each side of the sizes.

The plywood sheet is placed on the plywood, it is covered with a cloth on top. Fabric is fastened with an inside with furniture stapler.

The seat is attached to the base of the piano loop.

Bench swing

To make such a bench for giving with your own hands, you should prepare necessary materials. Start making from creation basics Designs. The seat bars are attached to the backing bars under the selected angle.

Along the seat install extra ribsproviding hardness.

On the seat are attached planks Saving in the base of the base of the opening for fastening. Also come with the back.

From both sides of the seats install armrests. They can be consolidated by bolts.

Received bench coveredfunds to protect wood and varnish. It is very important to cry around the most carefully.

Bottles reinforce metallic profile. The chains are attached to the profile on which the bench swing will be tied. Be sure to check the reliability of the beams to which the bench will be suspended.

Bench bench

For the manufacture of such a bench, with your own hands, it will be necessary chainsaw. A thick log is taken as the main material one meter.

Log mark To get two slightly unequal parts. The backrest will be made, and from the greater - seat.

Chainsaw logs splitalong the label. The resulting irregularities are immediately cut off by the same saw.

The carved triangular piece is cut into parts and insert into the holes on the seat. From above pinned back. Bench is almost ready. It remains only to give her a more decorative look.

You can put the seat on legs. To do this, in the lower part make recesses to install a pair of logs as legs.

Bench Transformer

Features of the transformer design can be considered on the drawings of the bench. The bench is made by the transformer with their own hands boardswhich is seized by named size.

In sliced bruce details Drill holes for fasteners.

At the tablet, the boards, located with the edge, can be made wavy.

In the material intended for countertops, Drill holes with a diameter of twenty-two millimeters and a depth of three centimeters. They will insert the cuttings of the same diameter.

The edges of the details and edges are processed and spinning.

The assembly of all elements is performed by screws and screws. Screws are needed with dimensions of 6x70 and 6x90, screws - 8x80.

Wooden pieces painted morilka.

Details of the design that will move are connected by hinges.

Between the boards of worktops placed parts of the round Cutter.

Install the stop for backs.

Made with your own hand bench Transformer coat varnish.

Rocking bench

Make the original bench with your own hands is not difficult if there are tools and materials. First you need to consider the drawings of the benches that contain a small number of details.

Side parts on the lecture are transferred to europaneru Three centimeters thick. They are cut down using a jigsaw and treated with grinding ends.

To secure connecting staps, markup is made. Then the holes are drilled. After assembling the frame, the rails are fixed using selflessness. Mounting places are spoiled, and the product is entirely covered with varnish.

Bench around the tree

The easiest version of such a bench - hexagon The size depends on the size of the tree. Measurements are produced at the altitude of the seat location. The resulting result adds more from fifteen to twenty centimeters to the result. If the result is divided by 1.75, then the length of the inner side will be.

For cutting boards, ten centimeters width are placed in four rows with gaps in one centimeter.

The location of the cut is planned immediately for all rows with an angle of thirty degrees. So cut out Six sets of blanks.

The legs use sixty to seventy centimeters high. They are connected by crossings, drumped holes and using bolts with nuts.

The seat is installed so that the joints are located in the center of the ribs of the legs. First screw out outdoor parts, and then internal. In this way, the entire hexagon design is collected around the tree.

At the end they make a back and mount apron. The result becomes a circular bench with his own hand.

The finished product is treated oil impregnation.

Bench of curved branches

The bench from curved branches will look original. For a branch for the front, two legs, horizontal tops and a pair of transverse branches.

Split things So that they come together to each other as accurately as possible. Next, they are connected by metal corners.

Similarly make the back of the back and connect it from the front.

The finished product put on a flat pad and collect the seat.

Options for beams

• Bench benchwhich combines well with the surrounding nature. It consists of halves the log used for the seat, and two short round logs that are legs.
  
• Beautiful wooden bench with back and armrests, reminiscent sofa. Curved and carved elements make it more attractive, and the abandoned bits and irregularities give the designs naturalness.
  
• Bench of wood and metal. The base is metallic. Wooden seats and backs are fixed on it. Thanks to the small thickness of metal parts, it looks easy.
  
• Bench is simple, classic shape. It is made of wooden, fairly wide boards. This width allows you to comfortably be located on the bench. Armrests make the design more completed.
  
• Original bench of wood with curly details. This option is well suited for a plot with natural rural design. Carved legs and armrests, curly back - all this gives the product of the originality.
  
• Bench with a back of an interesting form. The curved details will gradually deviate back, creating the uniqueness of the design. The seat is slightly curved, but has more traditional appearance.
  
• Complex from a tree - Table with two benches. The design looks traditional thanks to the material used. Original decision It is bonding all components into a single design.
  
• Bench made of solid log. From it a single part that combines the back and seat. Legs are attached below. The log requires quite large sizes.
  
• Bench with toy storage box. Outwardly, it looks like a plain wooden bench-sofa, but under the seat she has a box in which you can add different things.
  
• A comfortable bench made of simple shape tree. The base is made in the form of a rectangular box. The back is also simple with direct shape. The seat laid soft pillows providing additional comfort.
  
• Wooden bench, located around the tree. It is made as if it consists of four benches, each of which has one armrest. The composition looks attractive and comfortable.
  
• Bench simple shape from wide boards. It looks thorough, but its dimensions are somewhat close due to the lumen between the boards and light blue colorin which she painted.
  

It turns out that the cottage can be appropriate for benches do it yourself from wood, moreover, not the worst, the week of the park or Square, where we met them most often. And if before that it seemed to you that everyone is similar to each other, be sure to read the materials of our article to make sure how much this subject can be diverse, creative, solved in different stylesBut, at the same time, invariably convenient and useful for country life.

Benches for the garden from the tree do it yourself

The most simple varieties benches for the cottage from the tree do it yourself - These are options for which neither the back is not made, nor armrests. They can be easily found in the middle of an extensive garden, because it is more needed to sit down or put a heavy cargo. The absence of the back is sometimes perfectly compensated by the presence of a retaining wall of the back, which is why the sitting person turns out to be protected from a draft, and there is an opportunity to learn if such a need to appear.

But if you crush your head with the manufacture of such things, then it is worth doing something more ambitious. Especially since if you are familiar to the base set of tools and you have already had to work with boards and a bar, then such work will definitely not be for you hard. Where is the most important to choose exactly the option wood benches do it yourself, photo which you will enjoy more than others so that it fit into the existing landscape design. And, in fact, when it comes to garden benches, it is very important, since at the same time they can be used for furnishing both indoors and in the open space (portable options are very, so much), so it is worth deciding whether The design is strict, classic, concise, or you want to turn the craft into a real art object.

Simple bench do it yourself from wood

Moving on the logical path, we will start a review from examples Simple benches do it yourself from wood. Moreover, it is simple, just from the point of view of the process of its manufacture, but its appearance, if desired, can be supplemented with an interesting decor. Yes, and in principle, the most simple shops are many years unchanged leaders among popularity.

To deal with the bench and the stages of its assembly simply, even if you do not use photo and video tutorials. What to say for simple benches with your own hand drawings They are the main board to which two wide legs are nailed. If you want this to be sufficiently large (for example, to put it on the terrace for receiving guests or install along a long alley), it is necessary to provide additional legs that are mounted in the middle or at an equal period of length. For fasteners, it is used by standard fittings or at all bypass the bars of the tree together with the tree screws or nails.

If you want to add all the design of stiffness and, at the same time, make it in any interesting style, you can add interesting structural elements, for example, as supports that you can see in the photo above. Here you see that the project is complemented by two additional beams and inclined boards. The result is a very durable and very beautiful product. Another simple example is a variety, since it is they who make an elementary design a very interesting product. In terms of cost, it will be somewhat more expensive, as the timber is noticeable more than the boards, but ideal for those who chose the national style for country buildings, chopped huts (bath, gazebo, and so on).

As for the decoration of an existing product, then it is best to use or multi-colored paints, or appliqué - decoupage technique. Both of these options are illustrated in the photo.

Garden benches made of wood with their own hands

And yet, in most cases, we do not have enough simple, ordinary garden benches of wood with their own handsSince the functions that are placed on the furniture much more than just temporary rest from the works of the righteous in the middle of the garden. It will be much more comfortable if you can lean on a comfortable back, climb on soft pillows, unsettled from above, put a plate or a glass on the armrest. Generally, new furniture It must be no less functional and useful than.

Before looking ready ideaswe will pay your attention to projects benches do it yourself from wood, drawings which will allow us to assess the complexity future work, Calculate the budget and cost of materials, as well as relate to your strength. In the photo at the top you see several examples of such drawings, among which there are both simple and more complex, for which you will need to create several additional items.

Ease of use ready for garden benches of wood with their own hands drawings It is that in advance the desired sizes of each board (namely, they are the most common variety of material), you can save time and cut them on the specified parameters in the store. Due to this, further the whole process will remind the assembly of cabinet furniture, you will sufficiently connect needed elements Between themselves, fasten them, and then process and lead to the desired appearance ready-made product. Such a technique is very often used by homemade amateur masters to make faster, seemingly complex crafts, like a gazebo, porch or.

You can also find drawings in which the product would be made entirely of wood, but using other materials. In this case, you may need, for example, a metal frame, which is attached to the backs and seats. Very popular to date seats that are fixed using slag blocks or similar building material, moreover, it is helped to make work faster than these technological recesses within each brick. The finished result of such work, when we can see in the photo above.

Make a tree bench do it yourself

A couple of examples like make a tree bench do it yourselfmay tell you in which direction your ideas should move. Since the stage of development of the project and drawing up the drawing has already passed, now we will now move on to the practical side of the execution.

The first stage is wood processing, and useful power tools help us to speed up the process. Thanks to it, we are much faster thanced the surface, clearing it from possible roughness and the dominance, as well as give all the ends rounded shape. This will help in the future to avoid injury if you hit the sharp edge of the benches.

The assembly of the main elements begins with the legs, they must be fixed using for this stretched for the entire length of the future the timber. For greater reliability, the strapping makes a double, top and bottom so that the future shop can withstand a fairly large weight. The boards are fixed to the top bars that form the strapping, but they are connected to each other so that the gaps in a couple of centimeters remain between them. This technical necessity, because the air will be better to circulate, and moisture (rain, irrigation systems) will leave the surface much better.

At the next stage, make an additional strapping on the legs of two or one bar. After that, it remains only with the help of two boards to form a back and as a result you will get so cute garden benchwhich is depicted in the photo. On this process, its production does not end, because it must serve you for a long time. And for this you need not to shake on high-quality paintwork materials and impregnations, thanks to which a fully wooden product can be without any problems on the street under the open sky all summer.

Often the need arises make a garden bench from the tree do it yourselfUsing any simple, infirm materials. It is difficult to say today whether the Furniture from Pallet is to save money or has already moved to the fashion trend section, when the cost of such a headset can be comparable to conventional varieties. On the master class, which you see above, is exactly an example of using multiple pallets to get a spacious and durable shop, which will meet all fashionable design tendencies.

Bench do-it-yourself bench with a back

Master class on the formation benches with their own trees with a backFor which old chairs are used, only begins a small section dedicated to creative ideas.

For the crafts, you will need two identical stools, which are removed everything except the carcass itself. If necessary, you can disassemble chairs and strengthen them, changing metal parts and fasteners, but the general view should be authentic. A rectangular frame is hampered between them, as shown in the photo, then it is duplicated by another strapping below. In order to use the subject as much as possible, you can not just make the strapping, and fill the row of BRUSEV, receiving a useful shelf. A number of boards are nailed to the top and the entire finished product is painted in a single color to hide the fact that it is assembled using the recycling. You can decorate such a shop with soft pillows that are laid out on it from above, and the appearance is suitable for the garden, made in a classic, romantic style.

Concerning non-standard solutions, then such a product like a bench is so simple that you will have the most interesting options on your shoulder. For example, you can beat big trees growing on your site and make a place to sit right around them. Other interesting option - Make holes right in the surface and put the pots inside with flowers or decorative trees. And you can make a whole hack with the opening lid to store inside all toys for the playground.

In addition, forget about the direct form, as the only correct and experiment with the corners and directions.

Garden benches are the most popular small architectural forms. You can make them any sizes and structures, but besides your direct purpose, the benches are performed and a decorative function. You can make your own hands for yourself a garden bench, using our drawings and photos.

How to make a bench from the "thrus" materials

The easiest way to make a bench is made of wood. This is a traditional material for garden furniture, available and easy to handle. But in this case, it can be saved by choosing as the main material the one that literally lies under the legs.

The first option is trees, rods and stumps from the same site or nearby forest stitch, in which the sanitary logging is carried out.

Gently cutting off a couple of medium in size, they can be used to base bench. From the jeres to make the lower crossbar for stiffness of the structure. And for the seating to dissolve on the circular part of the barrel. If there is no equipment for longitudinal sawing, then you can take an unedged board with a thickness of 75 mm.

In this example, the bench is already more comfortable - in addition, in addition to the seat there is a back. The model is a little more complicated, as it will have to find a higher part of the trunk and to process it in two receptions - at first to make a profile cut by the "ledge", and then the workpiece to dissolve into two halves.

And to collect the following bench, you will need:

• two short logs of one diameter for the base;
• two medium porsi thickness for backing support;
• one long log, collapsed by two halves (for seats and backs).

In short logs, you need to choose a groove so that a long log lay in it. Then the seat is fixed in the grooves, and each storm is fixed at two points - to the base and the seat. For fastening it is better to choose a powerful samongate tree bolts.

Another budget material for cottage bench is pallets (wooden pallets). But not any pallet is suitable for the manufacture of garden furniture. Ideally need from good edged board, the so-called europallet, which can be found in the EUR marking.

In principle, the standard euro tray width is somewhat large for the seat - 80 cm. You can shorten it up to 67 cm, cutting along the contour of the central bar. But you can not do this. Here are some examples of simple designs with different options bases and seats:

1. Bench of four pallets over the width. Three serve as a base, and the fourth back. The backrest pallet will have to take part of the support bars, and the rigidity of the bench is to provide with wooden plates.

2. In this case, four pallets are also used, but already cut. For fixing the backs, three ropes woven oblique, and for decorating - wallpaper nails.

3. This bench is made of only two pallets. One whole, and the second cut and, as it were, bent at an angle - it serves simultaneously and the seat, and the back. The design is good for its mobility - small wheels stand as legs.

Perhaps the only inconvenience of the use of the European Pallet as a starting material is the standard dimensions of 80x120 cm. They are to some extent limit opportunities for creativity. The use of conventional sawn timber (boards, bar and bar) allows you to make a bench for giving for every taste.

Board and Barlok.

Immediately it is worth saying that any drawing of the bench can be corrected for specific conditions. The only restriction so that the thickness of the board and the cross section of the bar was sufficient to carry out carrier properties.

Below is a drawing of a bench that is made of only three "paired" elements:

• seat and back;
• short support (rear leg) from the board in the form of a trapezium;
• long support (front foot).

1 - front leg; 2 - rear leg; 3 - seat; 4 - back; 5 - front view; 6 - side view

The result is a steady design with a triangle at the base and two transverse ribs of stiffness.

This is how this bench looks "live."

On this drawing bench in a more complex performance. For its manufacture, you need a 40x140 mm board (supports, back and seat), 40x70 mm bar (short bundles of supports) and 20 mm board (long bundle between sidewalls).

And this is the same design, but using a board and a bar with a thickness of 75 mm. Small differences in the base and fastening of ligaments are not fundamental.

It is fundamentally only one condition - the board in the seat is attached with a small gap sufficient to compensate for the extension of the tree at high humidity.

Large forms

Veneers look original in "Large format".

For example, this is the "fat" unedged board across the entire width of the log. Covered with transparent varnish, it transmits the natural beauty of the tree with all the color transitions.

From the rounded log, you can build not only a cottage or bath, but also such a garden bench.

And from the bar you can collect an original chair that can serve not only under a canopy, but also outdoors - removable pillows in bad weather are easy to put in the house.

Stone and tree

Stone, like a tree, also organically fits into the countryside landscape. Of course, a smooth plate in nature is practically not found, but you can use the saw stone.

The following option is easier to execute - the bench is composed of small blocks of wild stones. And since such a surface is not only cold, but also uneven, then no pillows can no longer do.

Pillows add comfort, but they have to constantly bring and endure. That is why for seats in garden benches, regardless of the material of the base, apply a tree. This is how such an original bench, at the base of which the Gabion is used (a cell from a grid filled with stone, rubble or pebbles).

No less popular for the manufacture of the base of the Bench concrete. But to do at once a composure form for the fill is difficult, but a small formwork is simple. And even the "cold seam" when filling in two taking structures (such as in this photo) will not affect.

Another version of artificial stone is hollow building concrete blocks. It is enough to spray them with a good masonry glue among themselves, and in the cavity lay a bar, and the bench is ready.

Metal and tree

The simplest pavement shops on the metal frame use a square profile.

You can cook from the profile pipe two sidewalls in the form of the letter "H", and the wooden seat from the massif will also serve as the "rigidity edge".

In the following example, an array of wood is also used as a stiffness element, but the supports are made in the form of a square with a cross-line for fastening the seat.

And this is the simplest self-supporting design of a square profile, in which the strength and rigidity of the weld base is sufficient to make the seat from a wooden bar.

The following photograph shows a factory bench.

But if there is in the domestic workshop of the pipe bender (and it is easy to do and with your own hands), then bend two types of arches and "wave" from a round tube. Then the metal blanks must be welded, put plastic plugs on the legs (sold under any profile and the size of the pipe) and fasten the bars on the "wave".

In a country house or in the country, each person wants to have only high-quality and multifunctional garden furniture, which will not occupy a lot of space, and at the same time will perform maximum functions on the household plot. Therefore, the transformer bench will excellent decision For joint tea party in a family circle. There you are at the same time a shop, and the table, and most importantly, you can make this design with your own hands.

Bench Transformer - Description of the construction, principle of operation

Such a bench for a country house is a fairly simple design, which can be easily transformed into a table with two comfortable benches. And in the folded embodiment, this is a regular bench with the back and handrails. She will not take a lot of space in the territory pricework And at the same time it will be able to fulfill all its functions in full.

Functions and convenience benches

This is a compact and practical bench that is easily turning into a fairly spacious table and two comfortable benches. Due to the high degree of mobility, you can install it anywhere in the household site.

The only disadvantage of such a bench is its considerable weight, as a lot of wooden boards will leave a lot of wooden boards, but it will be sustainable enough, reliable and durable, if you do everything correctly and accurately on the developed instructions in compliance with all technological processes.

Preparation for building construction: Drawings of the project with dimensions

Before starting to build a bench - a transformer, you must prepare all the materials and tools, and also make a good drawing or find it on the Internet.

We offer you a typical drawing - a bench's scheme - a transformer with the dimensions specified on it. The most difficult action is to create a mobile mechanism, so initially it is necessary to prepare all the blanks, which will then be collected in a single transformational structure.

For the manufacture of bench - the transformer will need to purchase lagged edged boards and a timber. It is best for such a design larch, birch, pine, beech, ash or oak (if it turns out, since it is very expensive).

The board must be well polished, have high quality and comply with all conformity standards. If you buy a board on a sawmill enterprise, you will definitely ask the quality certificate to their products, since under the guise of the cutting board of an oak you can sell a completely different product, and if you do not understand the wood, then it is best to take a carpenter with you, which disassembles the species Boards and its quality.

Material Calculation and Tools

To build a bench - transformer we will need:

• Two bars with a cross section of 90x45x1445 mm;
• Five bars with a cross section of 90x32x1480 mm;
• Two bars with a cross section of 90x45x1445 mm.

To work, we will need such tools:

Stages of making shop-table

1. The first step will be the production of a frame of the frame. To do this, it is necessary to cut 8 of absolutely identical bars with a length of 70 cm and on them to be at the bottom and at the top of the oblique cuts (also the same), in order to be able to get the perfect equilibrium with a further installation of the design under a specific slope.
2. Next, we make a frame under two benches made of polished edged high-quality board. Cut four cuts of 40 cm and as many segments of 170 cm. On all boards, the angles must be cut off so that you can then make two completely identical rectangles a little oblong shape. For their docking, we use special cooked screws or nails. But for the beginning, drill the drill the same holes in the boards (the length of the boards is 1.7 meters).
3. In the framework of the design it is necessary to make several strong strengthening elements that will further form a comfortable seat. To do this, we take a wooden bar and nail it in increments of 500 mm. So we divide the design to the sections and protect the future bench from lateral deformation.
4. The legs must be screwed to the seat at a distance of 10 centimeters from all corners diagonally. We do it so that the jokes are near the "seams" or a little further. It is very important to make the highest quality elements of the design, that is, fix on 2 or 3 bolts that pass through the timber and the upper part of the cooked legs. The bar need to make grooves in which we will hide bolt hats. And under the nut we cut off the hacksaw too much.
5. Next, we make a rectangular element of 70x170 cm from the bar, which, from the inside, connect with additional parts that ensure the stiffness of the structure. In the future, we use this item for the backrest or countertops.
6. At the moment, the framework we do not close the shields, as it will be difficult to collect all the mechanism in a single whole. Also complicated the transfer of the design.
7. Three elements of the element we connect to the common system. This work is quite complicated, as it will be necessary to work with large parts of the future bench - transformer. It is best to produce all work on a smooth floor or on a special big table. All connections we make moving and fasten them with hinges or ordinary bolts.
8. Cut off two 40 cm long bar for fastening them between the bench and the shield of the table at the corners. They will be at the bottom of the shield, but with the side of the benches itself.
9. Cut off two more bars with a length of 110 cm so that the back is inclined. Breep them with self-draws or other fastening elements In another bench, but in this case, the fastener is placed not from the near side, but in the very center. Otherwise, we will not be able to properly connect two benches together with each other.
10. After we collect the entire design, and you will carefully check the work of each rolling element, it will be possible to begin to stem from the outside. To do this, we take the edged well polished board, but you can take a bar or chipboard (if the bench - the transformer will not constantly stand on the street). Thus, we performed the technical stage of work.

The bench - the transformer can be covered with a veneer and then water-repellent varnish that the yacht decks are painted. Varnish dries about 36 hours. But still a bench, covered with varnish, is not recommended to keep on the street in the rain and snow.

If the design is performed correctly, and you will care for it, it will last you at least 20-25 years. Very often, the masters replace the tree with the metal, which looks not so beautiful and aesthetically, but the service life is significantly increased.

Second version of the transformer bench made of metal profile and wood

Materials and Tools for Design

Bench - a metal profile transformer is made similarly wooden, but only with some changes.

For the manufacture of such a bench, we will need:

Stages of manufacturing design

1. We clean all metal profiles from rust so that then it was easy to work with the material - cooking pipes and paint them.
2. And then according to the drawing drawn, cut the workpiece size in size.
3. We make a frame of seats. To do this, weld the pipes as shown in the figure and, if necessary, enhance the design.
4. In the future, this design will perform the role of the table as well as the bench back. We also had to change the angle slightly.
5. Weld up another seat.
6. After implementing all welding work We begin to drill holes and twist everything on special furniture bolts (their length should be at least 60 mm). Then we insert the washers between the iron elements so that it is easier to decide.
7. Here we see the final version of the bench - a transformer, where an additional durable leg is drawn to one of the beats and a few changed the angle and feet in the second shop, since the angle of inclination was treated in the back, and it became sharper. In order for the bench does not shift, it was necessary to digest the design.
8. For the legs, cut the "heels" with a size of 50x50 mm made of metal sheet so that the bench is more stable and not "drowning" into the ground, if it is on a soft soil.
9. Depending on the size of the design, we cut off the board and span them well. It will be our seats of shops and the surface of the table.
10. As a result, we get an excellent finished design bench - transformer.

Finish shop

Then we all the boards do so impregnate with an antiseptic agent, with antipyarem and let them dry. Stain with water-repellent varnish, oil or acrylic paint. We apply a varnish or paint into several layers.