A bench is an item that should be on each loft. However, the purchase of a metal bench does not always have the opportunity to allocate funds. Therefore, you can make a shop with your own hands from the profile pipe.

Advantages and disadvantages of the profile pipe

The profile pipe may have a different section shape:

• oval;
• diamond;
• square
• rectangular.

It is made of carbon and low-alloy steel, therefore it is very often used both in civil and industrial construction. Such a pipe is easily cutting, welding and bending. From her you can make a beautiful garden gazebo, swing and rollback gates, children's swings, carousel, different kinds Fences and other small architectural forms for pricework. Including a bench.

Proftrub has:

• increased level of resistance to large physical and mechanical loads;
• fairly acceptable price;
• small weight of a ready-made shop design.

At the same time with it it is very easy to work.

The pipes with a round (oval) section have a high degree of resistance to mechanical loads, so it is best for the manufacture of a metal courtyard. It is recommended to choose thin-walled pipes with a thickness of 1 to 4 mm, since they are easier to work with them at home. It is worth the material inexpensive, and the metal structure will be easy to light.

A significant disadvantage of such a pipe is its corrosion exposure, so the shops will need to be regularly painted with oil, alkyd, epoxy or polyurethane paint with pre-priming and removal of old coating and the rust appeared. But if you correctly care for such a product, it will last you for a long time.

Photo Gallery: Profiterba benches in the country

Garden bench made of metal profile will fit into the household landscape You can always independently adjust the width of the back and seat Waves for cottages from metal products can be decorated decorative elements Shop can be made without back

Tools and Materials for Work

Metal pipes are not the only material that will need to be used for the manufacture of the bench do it yourself. You will need:

• pine boards for the base of the base of seats and backs;
• powerful welding machine;
• pack of electrodes - 3 mm;
• a corner machine (or knife for metal);
• powerful drill (for drilling wood and metal);
• fire or sandpaper;
• accurate level;
• roulette or normal meter;
• planning for grinding;
• paint and primer for metal;
• protective glasses (mask for welding work) and gloves;
• paint on a tree (you can take a varnish or a moron);
• reliable hammer;
• large pliers;
• tree bolts with nuts.

To flexing the pipes, you will need a special tool "Snail", which can be used as an ordinary brake disc from the machine. It will not damage the material.

How to make a metal frame for a garden bench do it yourself

Before entering the manufacture of a bench of any type, you need to spend preparatory workIn particular, it is recommended to study in advance to study the fracture technology and pipe welding.

Flexible metal pipe

In order to create bent items, you need to shut one end of the tube tube, and pour small sand into it, and then close on the other side. Then place it in the device for flexion by closing between the protrusion on the brake disk and the pin, and then bend under the desired angle.

If the pipe is not good enough, you can use the soldering lamp, and heat the bend place.

For the manufacture of various elements for a shop, it is best to take pipes with a round or oval cross section, as they are best to bend.

Sequence of the manufacture of a coating bench without a back

The bench without a back is a very simple design, so for its manufacture it will be necessary to make three rectangles that are connected to each other pipes protruding as a seat.

For the manufacture of a shop it will be necessary to take:

• metallic square or rectangular tube 11 meters long (cross section of rolled 30x30 mm);
• 2 pieces of a pipe profile 2.3 meters;
• 6 segments of 60 cm;
• 6 segments of 45 cm;
• 8 wooden boards 6 cm wide;
• 24 bolts with nuts.

For the manufacture of a conventional bench without a back, it is necessary to weld 3 prepared in advance of the rectangle, and then together connect them with two guide pipes that will serve as a frame for seating. Next, the work should take place according to plan:

1. Long supporting segments need to be located horizontally, and more shortly secure vertically.
2. In the process of welding sliced \u200b\u200bpieces of pipes, you need to withstand the corners of the supports, as they should be exactly 90 degrees.
3. After all the work on the welding, it is necessary to well clean all the seams with a special grinding or a conventional file.
4. Then the seams must be well primed.
5. After the framework is welded, each of the supports you need to drill 8 holes (arranged symmetrically) for fastening the boards.
6. To prevent the appearance of rust, the framework of the bench must be covered with paint for metal.
7. Wooden boards are recommended to impregnate with a mourn.
8. If desired, wooden boards can be replaced with rectangular tubes. They must be simply welded to the design and also paint anticorrosive paint.
9. In order for sharp corners to do not interfere, the rails can be laid in a specially prepared frame from metal. It will take 1.2 m tubes.

How to cook frame beef beefs with a back of a small size

You will need:

• profile tube with a cross section of 25x25 mm (8 m);
• pine boards (thickness 30 and 25 mm) for the seat and backrest device.

For the skeleton device you need to prepare in advance:

1. The pipe profiled is 1.55 m. To create a jumper between two supports.
2. 2 curved pieces of pipe 78 cm. Supports for the back of the bench.
3. 2 pieces of pipe 35 cm. For the manufacture of the base for seating.
4. 2 pieces of pipe 39 cm. For the front supports.
5. 2 pieces of pipe 20 cm. To strengthen the front support.
6. 4 steel plates 40x40 mm. For the manufacture of supports on support.
7. 2 Bottled steel strips of 45 cm. To connect future supports.

For the manufacture of seats will be needed:

• 3 Pine boards: Length is 1.6 m, width - 6 cm, thickness - 3 cm (for the base of the seating);
• 3 boards: length - 1.6 m, width 6 cm, thickness - 2.5 cm (for the back);
• 24 bolts with nuts.

Working on the manufacture of a bench consists of several stages:

1. First you need to weld the transverse crossbar and two pieces of pipes with a length of 35 cm. The jumper should be exactly the center of each of the pieces and at an angle of 90 degrees.
2. To this design, you need to fight two curved pieces of pipes for 78 cm long. It is necessary to weld at the place of bend.
3. Then the front elements of the support structures should be used to the workpiece. At the same time, the location of their compound should be 9 cm from the base of the shop.
4. In order to increase the strength of the shop, the front supports must be connected with the welding with a pipe that will perform the function of the transverse jumper.
5. Next, you need to welcome 2 arcs between the supports and fasten at the ends of the legs. The finished product must be well polished in places of welding seams.
6. Then the metal structure must be projected and paint with special anti-corrosion paint.
7. On the finished design, it is necessary to symmetrically arrange wooden boards, which will serve as the basis for seating.
8. Before installing boards, they need to be treated with varnish or verses. The design of the boards shops are attached with the help of special bolts with round flat hats. For the bottom, thicker and durable boards are used, and for the back - a little thinner. If necessary, they can be painted with any oil paint. If there are no wooden boards, then for seats you can use the same metal pipes With a rectangular cross section.

For convenience, you can make metal armrests on the bench. To do this, take two pieces of pipes for 75 cm and just bend them at an angle of 90 degrees, and then welcome on the sides to the metal frame. Seams are treated with a grinding machine or a file. Armrests can also be painted.

If you make rounded soles near the legs, then on such a bench can also be swing.

Finishing shops after its assembly

After the whole design is assembled, you can simply paint it with special paint for iron. With varnish or verse, it is recommended to process wooden sites and backrest, and then the shop will acquire a beautiful natural color. Such a shop will look great on any household plot. The decor is chosen taking into account the landscape design.

You can independently sew soft comfortable pillows and bedspreads for the back. Children and older people will be very comfortable to sit on them in warm summer days.

Video: how to make a bench made of metal pipes without a scheme

Whatever the street shops you choose, profile metal pipes will be able to significantly reduce the finished product, and at the same time it appearance And the strength will remain at the highest level. Such benches will look great at the household plot. country house or cottage.

Bench for giving with your own hands: photo, drawings, schemes. The arrangement of the household plot is carried out by various methods: canopies and arbors are installed, walkway tracks, flower beds and flower beds. The final nuance is garden furniture. For arrangement, a small recreation zone will suit the countryside bench with their own hands: drawings and schemes of beautiful designs, as well as recommendations for creating them, you can find in this article.

A garden bench can be a key element in the design of the local area.

Types of designs and photos of country benches

A modern range of garden furniture is quite extensive. Product classification is carried out on the basis of such signs:

• characteristics;
• material;
• functionality.

Wooden bench located on a private house veranda

Photo of country benches with their own hands, their functional side

Functional features of furniture are valued along with their practicality and durability. All products are divided into two large groups:

• benches used exclusively for seating;
• the Multifunction Benches (the product can perform several functions - to be a bench, rocking chair or table).

Bench with back, made of logs and boards

Helpful advice! Use the unusual design of the transformer bench to economically spend place in the garden. It can easily be converted into a table for writing or meal in the fresh air.

Many owners of household plots are installed swing shops. Materials are used to create them of different types, and the designs themselves can be given an interesting form. In order for such a bench to be convenient to use, it is necessary to build a canopy over it. It will protect the sun and precipitation.

Swing shop - Great garden furniture

Popular for making with their own hand benches with a stationary type of placement. Most often they are made from concrete or bricks, and a special place is selected. Such products are not afraid of the effects of the sun and moisture.

There are shops of folding type with small dimensions and mobile design. They will be useful if country cottage area It is rarely used. During the absence of owners, folding shops are removed into the garage for storage or to the house.

The wooden bench with the back is used to organize a seating area in the garden

Stock Foto Benches for giving with her own trees and metal

Metal products have the highest strength characteristics. They are reliable, durable and can be operated throughout the year. Metal structures are unpretentious for care. It is enough to periodically cover their surface with an anti-corrosion agent, which will protect the benches from the destructive impact of moisture.

An example of a wooden bench with a metal frame

Fully made of metal bench will have a very massive appearance, therefore modern designs are manufactured using wrought patterns. It should be remembered that for this you need to get a welding machine.

Most of the owners of country areas that make a decision to make a bench for giving with their own hands, prefers wood. This material becomes the basis for creating benches with beautiful design, excellent performance and warm texture. Regardless of the design of a garden or yard, wooden products can always be in harmonious in the landscape.

Combined bench made of wood and metal with forged elements

Helpful advice! Take to work oak or larch.

In order to protect the surface of the product you need to cover with a varnishing composition or paint. This will prevent the damage to the wood that insects, fungi, mold, as well as moisture and the sun. Using the varnishing composition as finish finish It will help save the natural pattern of wood.

Metal products are distinguished by high strength and long-lasting operations with minimal care.

Stock Foto Benches for giving with her hands from stone

If you prefer practical options for benches, it is worth paying attention to products made of stone. This type of material is distinguished by low cost and long-term exploitation, and designs are durable, reliable and aesthetically attractive.

Stone refers to the category of materials of natural origin. Despite this, the designs of such shops will not always be able to support any design and garden style. Stone elements must be present on the site as a supplement. Especially profitable benches look on the background of a residential building, partially made of stone.

Bench, laid out of natural stone, with soft mattresses and multicolored pillows

A good ensemble will be stone:

• steps;
• tracks;
• reservoirs;
• gabions;
• flowers.

Partially or completely supports of fences, arbors and canopies can be made of stone. If at least one of these elements is present on the site, stone shops will always come to the place. However, it should be remembered that such products do not have a back.

Even the simplest shop from the stone looks sophisticated, noble and thoroughly

Photos of country benches do it yourself: Successful homemade plastic and other materials

Plastic products possess a number of advantages to which include:

• simplicity and small weight design, thanks to which the material transportation does not cause difficulties, and the bench itself can be moved from one place to another;
• efficiency;
• extensive selection of color solutions, which allows manufacturing a product that will later fit into the garden design;
• practicality (the design of folding-collapsible type is easily disassembled and stacked in the trunk and also easily collected in place).

Plastic benches have a slight weight, which makes them extremely mobile, as well as simple in transportation

Helpful advice! Use the drawings of garden benches with their own hands to create structures from combined materials. You will be able to endow your product with positive performance, which are inherent in each type of used raw materials.

Combined combinations of various textures, texture, color and origin of materials are used not only in decorative purposes. The most common option is a combination of stone and wood.

Combined bench built from metal and wood

It looks original designs made of wood and supplemented by stone or metal elements. In such projects, wood creates a soft and beautiful texture, and the stone and metal are responsible for strength.

Examples and technologies for the creation of country benches and benches with their own hands

Structures of the shop and benches have some distinctive features. Building shop - the simplest way Organize a sedentary place in the garden. The product has no backrest and, unlike the bench, has simple external performance.

Creating a shop - a fast and easy way to organize a place to stay in the garden

The wooden bench can be created with their own hands can have a more complex decorative design:

• non-standard form;
• armrests;
• design decorated with carved and wrought-iron elements.

The simplest ideas for the creation of country benches

To revive the design of a simple shop, it is not necessary to invent a complicated drawing and break your head over the creation of additional accessories for the garden. It is enough to use two wooden boxes and several boards.

Original wooden bench with a table designed for the seating of two people

Boxes in this case will perform the feature of the supports. After making the bench, they can fill the earth and organize a small flower bed. A seat is made from the board, which is installed between the boxes. Materials must be well stabbed with sandpaper, remove all irregularities and bursavar.

Helpful advice! From the bench-based shops, you can make a garden bench with your own hands. It is enough to install the design to the wall and to nail the plane in the required place several boards as a back.

Fig. 1-1. Scheme of a bench with wooden boxes for flowers: 1 - a device bench and calculation of materials: A - lags (2x4 boards with a length of 17 1/2 "- 6 pcs., 2x4 boards 20 1/2" boards - 4 pcs.); B - bottom of the box (3/4 plywood 20 1/2 "x 20 1/2" - 2 pcs.); C - trimes (1x4 boards 23 1/2 "- 16 pcs.); D - side lamellas (1x6 boards 25 "- 32 pcs.); E - trimes for vertex cladding (2x4 boards 45 "- 8 pcs.); F - Seat frame (2x4 boards 63 "- 2 pcs., 2x4 boards 16 1/2" - 2 pcs.); G - transverse staps (1x2 boards 17 1/2 "- 5 pcs.); N - seat (boards 1x4 length 60 "- 5 pcs.).; 2 - cladding board; 3 - setting the walls of the color drawer; 4 - mounting sizes of the drawer walls; 5 - diagram of the device bottom box for flowers

Designs of wood have a certain disadvantage. The material itself requires constant care, and in this case the tree also comes into contact with the soil, periodically it is necessary to carry out watering plants. To make a bench more practical, wooden boxes can be replaced by concrete or stone stands. Cream clubs from concrete can be made independently or purchase in the store.

For the seat should be used processed boards or half of the rounded log. The choice of raw materials depends on what style the garden or courtyard design is performed. It is recommended to fix the seat with metal corners recorded to concrete with the use of dowels, and to wood with through bolts or screws.

Fig. 1-2. Scheme of a bench with wooden flowers for flowers: 6 - mounting sizes of the skeleton of the seat; 7 - Strengthening the design of the bench; 8 - installation of seats relax; 9, 10 - Mounting box

As a support, vases with dwarf trees or decorative bushes can be used. The only one, but very important requirement - the container should be very strong. The seat is cut into the shape of a vason in the place where the legs of the benches are usually located. The size of the opening should be sufficient to create conditions for the growth of plants and care for it, however, it should not exceed the size of the container. In fact, the seat of the boards is placed on top of the vases and is fixed due to the strength of gravity and weight sitting.

Corner wooden bench with flowers boxes installed on a private house veranda

Making country benches from wood with their own hands in style ethno

Style design directions Ethno and Rustic are often used in the design of the premises. Country house, cottage or cottage - a great place to create an eco-friendly and natural cornersuitable for family holidays. This design can be continued in the garden. To do this, it is enough to make a bench with your own sketches from the logs (Fig. 1) and other natural materials.

Helpful advice! For construction construction, you can use logs with or without bark. Processing the material or leave it in a pristine form - depends on your wishes and design of the site.

Benches made of logs are distinguished by identity and environmental friendliness

The technology of manufacturing a country bench do it yourself from a log

To form a seat, it is enough to cut the trunk of a tree along. You can do it smoothly in the middle (in the diameter zone) or shifting the saw closer to the edge (in the middle diameter zone). The back is made of a tree trunk with a smaller thickness or you can make a cut closer to the edge part. As a result, this element should be thinner and easier than the part of the seat.

Fig. 2. Sad benches made of logs in the courtyard of a country house

The legs can be made from the remains of the log. They are connected to the detail of the seat using metal pins. This is done like this:

1. In the details that need to be connected, holes for pins are performed in the appropriate places. The diameter of the holes should be slightly smaller than the fastener diameter.
2. The pin is clogged into one of the holes about the middle of its length.
3. On top of the free edge of the pin, the second connectable part is attached and also clogged. In this case, the strikes occur not on the pin, but on wood.

Styles Ethno and Rustic are great for registration of the household plot

Fasteners are clogged with a sledgehammer or hammer. Since wood is in its structure a sufficiently soft material, hammer blows can damage its surface. To avoid this, you need to put an unnecessary board under the tool.

Pins provide a reliable connection of all parts. To enhance fixation, you can set 2-3 pins.

Bench with a back, made using logs

Ethno style in the country benches with their own hands: additional ideas

In style, you can create a design with non-standard execution. The highlight can be, for example, the manufacture of benches using curved branches of different diameters. Before assembling the product, these branches are processed and shattered. In other words, the bark is removed from them, and then the surface is grouped by sandpaper. An unedged board should be used to assemble the seat. It is processed in the same way.

Various options for wooden benches created in style ethno

Note! All elements of this design have rounded shapes, and the seatboards look forward.

If you have a braided fence on your summer cottage, you can use the same design option with some changes. Short seats can be replaced by long, placing them along. The back is formed on the principle of weaving from the branches of the middle thickness, which are well bend.

Rustic Style Bench will become a unique object on the garden plot.

To perform a woven back, it is not necessary to have any special skills. You may have a not very accurate result, but this is not necessary. The back should be simple and unobtrusive, rude weaving will only increase its decorative properties. The branches can be placed tightly or, on the contrary, leave the gaps between them so that your bench "breathes."

Bench bench installed on a closed veranda of a country house

Shop as an alternative to the dacha bench

Despite the absence of the back, this scheme (Fig. 3-1) of the manufacture of a shop looks quite attractive due to the characteristics of the material from which it will be performed. The design itself has a very simple structure, so everyone will cope with the technology of its creation.

For the legs need a rounded timber. If you have logs with a small diameter, you can save on the purchase of material and cut them yourself. The original appearance of the shopkeeping is obtained due to the fact that the bars are stacked one on the other and are fixed. As a result, beautiful supports for the product are obtained.

Fig. 3-1. The procedure for making a simple wooden bench: 1 - drawing up the drawing of the structure

Calculation of parameters and necessary materials

The height of the bench for giving can be adjusted with your needs. This indicator also depends on the diameter of the bar, which will be used in operation. To calculate the amount of material, it is necessary to determine how many bars will fit one to another to form the necessary height of one of the legs.

Dimensional table:

In our case, 5 bars will be required, the length of which is 0.45 m. The calculation formula: 5x0.45 \u003d 2.25 m. Based on this, the construction of two supports will require 4.5 m timber (2.25x2). The seat will consist of five 1.2 m long boards. For its manufacture, the following amount of material will be required: 5x1.2 \u003d 6 m.

Fig. 3-2. The procedure for making a simple wooden bench: 2 - sawd wood for the legs of the bench; 3 - drilling holes in the details of the legs; 4 - Preparation of seatboards; 5 - Processing the edges of the details of the seat

Helpful advice! To round the faces of the bar, you can use a milling mill or purchase a ready-made profiled material. Its cost is higher, but in the work, the profiled bar is much more convenient.

Starting Stage: Preparation Material

For the beginning, boards for the seat are prepared. The material is cut into the required number of boards of the corresponding length and processed. Sharp corners should be rounded. Take advantage of the possibilities of the mill or grinding machine. If you do not have such a tool at hand, it will be enough to handle edges with sandpaper.

Fig. 3-3. The procedure for making a simple wooden bench: 6, 7 - applying markings on the details of the legs; 8 - drilling holes in the intended points; 9 - Applying a protective coating on the part of the seat

Grinding using sandwich is a long and time-consuming process. To simplify the work, you can order a grinding of the material on the sawmill. After the boards are prepared, they must be opened with the lacquer. It can be a completely transparent varnish or composition with a touch (the choice of finishing coverage depends only on you).

Bruks intended for the formation of leg legs are tightly stacked next to each other so that their edges formed a flat line. Using a pencil and a square, apply markup in those zones where fasteners will be installed. The lines should be distributed over the entire length in a step of 7-10 cm.

Fig. 3-4. The procedure for making a simple wooden bench: 10, 11 - fastening legs to the seat; 12 - View of the finished product

Build Wooden Design: Fasteners Installation

Metal pins will be used as fasteners. Alternative replacement, they can become brazen, made of wood. Under the installation of the fastener, the holes are performed, the diameter of which is slightly smaller than the diameter of the pins, and the depth is half the length of the pint.

For fixing parts, fasteners will be clogged into one of the bars, and the next element will fit through the hole over it.

A simple bench without a back can be used not only for seating, but also as a table

Helpful advice! Build construction with pins - reliable mounting method. To increase the strength of the fixation, you can use the adhesive composition when installing, but this reception will make the design inseparable.

The pin connection is used and in the process of creating a bench's drawings for giving with their own trees, which is equipped with a back. A qualitative result can be achieved only if all the holes are strictly over each other. As a result, all parts when assembling should form a smooth edge line.

Wooden table and benches painted in white colorform cozy dining area in the garden

After applying lines of markup, you need to measure the distance from the edge, which should be the same. For these purposes, it is recommended to create a template. It is enough to take a piece of the plank, the width of which is 1.5 cm. It will serve as a kind of limiter. In other words, the holes from the edge will separate the distance equal to the width of this plank. Attach the pattern exactly along the edge line and mark the intersection points with already available perpendicular marking.

Installation of pins should be carried out in a checker order, so you should position the holes not at each intersection of the lines, but through one. On the other side, the bar is also performed by holes. They should be placed in a checker order to the holes that were completed earlier. As a result, when connecting legs with a seat on each bar, there will be a pair of pins.

Simple bench with a back, built of wood

The final stage of creating a wood bench

From a technological point of view, the previously described connection type can be considered correct. However, its installation scheme is quite complex for a person who does not own the necessary skills.

There is a simple way to fasten the design:

1. Bruks are stacked at each other.
2. Folded parts are fixed by clamps.
3. Are performed through holes At three points (in the center and around the edges).
4. Through the holes, the parts are fastened with a long stud (do not forget to put under the nut and the shear hat).

Original bench made from old wooden bed

After that, the seat board is nailed to these legs with nails (from above) or you can perform a pin compound in this place.

Helpful advice! To hide the placement of nails, prepare the masking composition of a mixture of very small sawdust and mastic designed for wood. Pick the mastic in the tone of the shop. To the mixture of all the places of connections. After drying, the surface should be sanded.

Options Simple shops from boards attached to a tree in the garden

When the construction assembly is completed, grinding all parts. Their surface must be as smooth as possible. After that, you can apply the finish coating. Use for these purposes the lacquer composition or paint for wood intended for external work. Better if the finish coating is translucent. So you can leave the visible natural pattern of the tree.

Wooden benches with comfortable soft seats, decorated with pillows

Drawings of benches for giving with their own hands: photos and descriptions

Bench for dacha Due to the presence of the back, has a more comfortable design than a shop. You can rely on it and relax your back. Capacity of such products can be different, but usually drawings of garden benches made of wood with their own hands are compiled for 2-4 person. This is done for the reason that the long design needs to install an additional support. As a result, the process of creating the product is complicated. In fact, space for 2-4 persons is sufficient, so it can be limited to the manufacture of simplest structures.

The bench due to the presence of a back has a more convenient design for the seating compared to the bench

Country bench with your own hands: Design drawings for two persons

For the manufacture of a bench for giving with their own hands with a back from a tree for this project (Fig. 4) you need to get the following tool:

• drill;
• a set of drills;
• hacksaw;
• rubankom.

Note! The design is designed for installation in the garden, on the balcony or terrace.

Benches built of wood harmoniously fit into any landscape

You will have no more than one day for the creation of a bench. The main material will be used square bar made of pine. The parameters of its section - 6x6 cm. Also required "Twenty" boards. Before performing the cutting of these boards, they should be kept until it turns out the details with dimensions of 5.8x5.8 cm.

Bench for cottage from wood with their own hands: Step by step instructions

Assembly benches for giving with their own hands From pine bars are carried out in the following sequence:

• with the help of a wadder and adhesive composition, we carry out the assembly of the legs for the sides of the P-shaped. Then, using the same attachment method, we fix the rails (5.8x2 cm) and bars - pods (3.5x3.5 cm) mounted on the sides;

Fig. 4. Drawing of a wooden bench with a back for two persons

• to outline the placement of response holes for the installation of the wanks, use the marker;
• connect the sidewall and longitudinally located rail. In order to mark the position of the sidewall, you should use a 2 cm thick laying;
• fix all the elements while drilling holes with clamps. This will allow you to achieve accurate pairing between the design items connected;
• before performing the final assembly, get enough all elements well.

The last stage of construction is the applying of a protective agent and finishing coating.

For a longer life of the construction of wood, we need to be treated with a protective agent and applying the finish coating

Country bench do it yourself from progress materials: Applying pallets

Of these primary materials, like pallets, you can create an interesting shopping center (Fig. 5). It can be installed not only in the garden, but also on the terrace and even inside dacha house. For work, three pallets will need.

Production Stages:

• one of the pallets divide in half. These halves will subsequently be the back of the product. Cutting should be done so that after assembling the details of the back and seats formed a figure of geometrically correct shape, and all the edges coincided;

Fig. 5. Procedure for the manufacture of benches from pallets in six photos

• two other pallets with nails knock together. They fix the backs of half;
• on top of the design, put the mattress of the appropriate size. You can use pillows from an old sofa, pre-replacing their upholstery, or sew new ones. You can also put several small pillows.

Using wooden pallets - interesting way creating original garden furniture

Helpful advice! You can leave the mattress lying calmly or fix it with belts. For greater functionality You can add wheels to the design.

Dark Bench Bench Drawings With Your Hands: Construction "Transformer"

For the manufacture of the design, pine sawn timber will be purchased.

Materials for work:

Transformer Bench Making Technology

Follow step by step instructionsYou can create an interesting bench, the design of which can be transformed into a table with two venues (Fig. 6).

The main stages of the manufacture of the bench:

• having created the support parts according to the drawing, attach 3 boards to one of them. From these boards will be formed a seat. Do not forget to retreat from the end to 5 cm. In each board you need to install 4 self-proof. Two of them will fix the seat to the support on one side, the remaining are designed to fix the seat to another support (on the other side of the product);

Scheme with the mounting size of the transformer bench

• at each assembly zone, the installation of 4 fasteners will be required;

Helpful advice! When assembling nodes, apply joinery for these zones. The adhesive composition will increase the strength of fixation and durability of the entire structure.

• after all the details are prepared for work, legs having a backrest and seat support should be styled from the end at an angle of about 75º. Using self-tapping screws, designed to work with wood, connect the legs pairwise with middle bars. The optimal length of the fastening elements is 5 cm;

Fig. 6. Scheme of creating a bench-transformer: 1 - kinematic transformer scheme in the "Table" position (1 - position limiters (pipe 20 × 20 mm, length 35-49 mm), 2 - support rod); 2 - detail C (pipe 40 × 20 - 2 pcs.); 3 - connecting jumpers (pipe 20 × 20 mm). D - for the outer bench, D1 internal; 4 - parts B, B1 (pipe 40 × 20 mm). B1 mirror in relation to B; 5 - leg benches (4 pcs.), Where: A - steel pipe 40 × 20 mm, 1 - jumpers (pipe 20 × 20 mm - 4 pcs.), 2 - hydraulic rod

• next, the back is performed. In the transformation process, it turns into a tabletop. Find the longitudinal edge of the supporting board. Its length is 32 cm. It is necessary to attach three boards with a length of 150 cm. At the same time, an indentation from the end in this case will already be 8 cm;
• the boards are mounted so that a 1 cm gap formed between adjacent elements;
• in the reference board you need to perform 3 holes, the diameter of which is 0.8 cm. It is better to perform this procedure in advance. These holes will be used to fix the back of the bench in a horizontal position.

Whole wooden design For a garden consisting of a table and benches

The final stage of building a bench transformer

To create axes of rotation, perform 2 holes at the top of the back leg. Fixation of the back to the base of the product will be carried out at the expense of a pair of bolts M8.

One of the holes performed will be axial, the second is ordinary. To simplify the operation of the bench, the bolt in the area of \u200b\u200bthe axial opening will equip the nut with 6 faces, the nut-lamb is suitable for the second. She should be bent a mustache. Due to this simple manipulation, fasteners can be turned off / wrapping without applying additional tools, but only power of hands.

A keyboard in the patio is a wooden bench with a back

Upon completion of all the work, you need to check the structure for performance. Place the back in the inclined position and secure it with bolts. Remove the fastening element from the hole and move the back to the horizontal position. To fix it, place the bolt to the previous place and secure the nut. The design is fully ready for operational use.

When creating benches, you can experiment. The main thing is that with this product it turned out is durable and practical.

You can safely relax in the shade of trees in the summer or to warm up in the sun in a cool autumn day you can on a bench made of wood, with your own hands installed in the garden. IN modern design Garden furniture is one of the full landscape design elements.

Taking into account the decorative value of garden benches made of wood, you should try to choose such a model that will harmoniously fit into the environment. For a young garden or a country area without large trees, it is better to choose the lightweight options for furniture on the decorative thin legs made of metal, laconic in shape of simple shops and benches. If the garden is old and well maintained, then the Provence style will be suitable - with stylization under old furniture with wooden decor.

Overgrown cottage plot with imitation wild natural age can decorate benches, with their own hands collected from natural material - fin, corping, slightly treated branches. Very good in such a garden will look like a bench made by an ax. Such sites should be installed in the places hidden from the eyes: Among the flowering bushes or by turning the path.

When choosing the place of installation of the bench for the cottage, you need to pay attention to the species that will open our eyes sitting on it.

It is undesirable to place a bench so that contemplate the unsightly fence or a compost bunch. Put it near the reservoir or flowerbeds, under the branched old wood.

Then the rest will be supplemented with the pleasure of the smell of flowers and the game of light on the water, the rustling of foliage and coolness in the shade.

Different types of benches can be installed on the veranda near the house, in the recreation area by the pool or street focus. They will find applying and under a canopy in the garden. In each case, you need to adhere to the general rules of the combination of a wooden product with a common segment style. How to make original Palet benches See this video:

The material for garden furniture is traditionally chosen by wood - lightweight material that allows you to implement almost any ideas. Currently, along with a conventional board and bar, you can use moisture-resistant varieties of thick plywood. From a durable and aesthetic sheet material, you can collect designs suitable for modern design landscapes and for a regular courtyard that does not have certain style features.

If wooden benches are performed in a stationary version, you should take care of protecting them from moisture. This goal can serve as a variety of impregnation and paint materials. Street furniture will have to be filter or varnished once in 1 - 2 years as the protective layer wear. Such measures can significantly extend the life of a wooden structure.

How to build benches yourself?

In order to build a comfortable bench with your own hands, you need to make her sketch. Exist optimal dimensions Sad furniture, which must be observed:

• seat height over a floor - 40 - 50 cm;
• width (depth) benches - 50 - 55 cm;
• the height of the backrest over the bench - 35 - 50 cm.

These sizes allow a man of medium growth conveniently to sit, rely on the back, easy to get up. If the host complex is very different from the average indicators, the gabarites of the shops will have to choose individually. The back is usually done with a slight tilt back. Read more about Wooden bears. See this video:

The following tools will be needed for wood:

• hacksaw or electrolybiz;
• drill and self-tapping screws, or hammer and nails;
• roulette;
• pencil.

For the assembly of products of a complex shape, carbon black can be useful. They fasten the parts that are connected by the "Schip-groove" or furniture key (dust). For products from plywood, long metal studs with carvings and nuts will be used.

Unpacking coat for garden or bath

The simplest wooden bench will be able to make even a novice master. Such shops in abundance can be seen at the gate of village yards, they can be put near the beds, in a bath or utility room. They do not differ in sophistication and decorativeness, but the functions of garden furniture can be performed quite successfully. For the manufacture of the bench, the board is required 2 - 2, 5 cm thick and a width of about 20 cm.

Bani or vegetable benches make easy

According to the drawing in Fig. 1. You need to cut the following parts:

• seat - 1 detail;
• apron - 2 parts, the length of each 10 cm is shorter than seats;
• legs - 2 details.

Spin the corners on one side of each point of the apron, as shown in the diagram. Measure from the edges of the element for the legs of 2 - 2, 5 cm on each side at the top, cut the groove with a length of 10 cm. If desired, cut the holes for the pens on the seat of the bench. About how to make a shop with your own hands, look at this useful video:

Product assembly to produce in the following sequence:

1. Drill holes for a self-tapping screw in the plane of the plank board at a distance of 10 cm from each end. Set the board in the groove on the details of the legs and screw the screws through the holes in the edge of the board. Attach the 2nd pattern of the legs on the other side of the apron.
2. Repeat all actions and attach the apron on the other side of the base of the bench.
3. At a distance of 15 cm from each end of the seating to make several holes in the plane of the board. To lay the item on top of the base and attach to self-drawing by screwing them into the end of the detail of the legs. For strength, additional holes can be made along the length of each side of the seating and attach it to the planks of the apron.

Processing the surface of the product with a large sandpaper to remove burstages. If necessary, paint the bench to your taste.

Simple bench with the back

Another simplest project is presented in Fig. 2. For the manufacture of a bench with a backrest, it will take 2 log cuts about 25 cm long, backrest and seating boards and 5x5 cm bars for backrest racks. If you want the seat to be slightly higher, you can take 4 log segments or timber and lay them on each other, tumping the wrenches.

The back is screwed by self-drawing from the reverse side.

The manufacture of the bench is very simple. So that there were no nuts and heads from nails on the surface of the product, to produce parts and glue. The back can be screwed with screws from the wrong side so that they do not drill the board through.

For the manufacture of the wrenches, wooden rounded rods are needed (a thin handle for garden tool is suitable). In the log, drill 2 holes with a diameter of equal dummy thickness. Focusing on their location, make response recesses on the bottom of the seating. Work must be done very carefully so that when assembling it has not been to customize parts of the bench. For more information about making a bench with a back, see this video:

Lubricate glue a piece of wood for the wanking and insert it into the hole on the log so that a small fragment remains outside. Its length should be equal to the depth of the removal drilled in the seat (Fig. 3). Lubricate the woven with joinery glue and put on them the board. Make the same thing with another log segment.

Cut the bars of the desired length for the manufacture of backrest racks. Screw to self-testers to the ends of the logs. In the upper part, drill 2 holes for fastening the back. The distance between the holes should be less than the width of the board. Screw the screws through the holes in the table. The finished bench can be painted or covered with transparent varnish.

Stylish bench with back

Make garden furniture on the proposed project is quite simple. The basis of the design is the plates of porcelain booking or concrete and a thickness of 2 - 2.5 cm thick. If you wish, you can replace the same thickness with light plywood. Wooden bench with a back, will be mobile.

Stylish bench is distinguished by an interesting back.

The following details will be required:

• squares 50x50 cm for legs (plywood or stove) - 12 pcs.;
• boards or plywood rectangles 15x200 cm - 5 pcs.;
• supports of the back 15x65 cm - 4 pcs.;
• crossbars 15x17.5 cm - 2 pcs.;
• rod threaded M16 55 cm - 4 pcs.;
• nuts and washers M16 - 8 pcs.;
• saws.

Phaneur will have to be pre-cut into fragments of the required shape and the magnitude. If boards and stoves are used, then this step can be skipped. On how to make the original shop do it yourself, see this video:

Drill 2 holes equal to the edges of the distance at the top of the square parts of the legs. Customizing the long details of the seating as in the diagram (Fig. 4), make 2 holes in them on each side. One end of each rod turn the nut and put on the puck. Alternate long and square elements, assemble a bench. Split nuts on the other side of the stud.

Such a bench can be used without back.

But for convenience you can do it. For this, 4 boards of 15 x 65 cm secure on the screws from the rear of the rear of the bench. In between them, incur or plant the crossbars on the shelves.

Decorative benches from natural materials

The raw tree is a wonderful material for garden furniture. The shop, similar to the Throne of the Forest King, perfectly fits in the landscape, imitating wildlife. It is very appropriate to such seats near rocaries or old trees with a spreaded crown in the preceded corner of the garden. Rustic benches with trimmed wild stamps for picnics or mangals from sandstone and boulders are well combined. Original shop in this video:

The easiest option of the seating from the logs is a monastic bench. For its manufacture, the unprocessed log needs to cut in half along. From short segments make legs, laying them with a drink on the ground. Long halves of logs fix on the shelters from above, spil up. To make a bench not a dirty clothes, it is better to choose hardwood logs and dry them well before assembling furniture.

To remove the offering and sowing, the plane of the sleeve is necessary to smoothly handle the plane and process the sandpaper.

The complicated version of such furniture is a bench made of logs, with your own hands supplemented with a back (Fig. 5) to attach the back, we need wooden or metal supports and crossbar. These details can be made of thick wood branches, bar, steel strips. The mount is produced on a screw of sufficient length or on nails.

Examples of original benches of wood

The logo from the logs can be made and otherwise (Fig. 6). On the photo, the grooves are clearly visible in the upper part of the thick log painted in half. In the grooves you need to insert a board with a thickness of at least 4 cm or a beautiful sawing of the tree trunk. If desired, the exclusive piece of furniture made by your own hands can be supplemented with a back. Supports for it need to be attached to the inner side of the legs on a flat surface. The crossbar can serve a thick branch or the same spoke of wood, as well as for seating.

Chopped table with benches

The set of tables and benches will be convenient at the dacha in the dining area or near the mangala (Fig. 7). Make this easy, if you know the main techniques for the manufacture of wooden log cabins. To begin with, 2 are approximately the same in the thickness of the log. A axes need to push semicircular recesses (bowls) at the ends of the logs. The size of the cup will depend on the diameter of the log, which is selected for the seats. This trunk needs to be cut along. Example of chopped furniture in this video:

In the middle of 2 lower logs, it is necessary to outstretten 1 cup to install a transverse support. It may not be a very thick log. Its length should be such that the ends are given by the side surfaces of the trunks.

For the base of the table, you need logs shorter. Their length is approximately equal to the desired collar width.

In the middle of each trunk, it is necessary to extrude the excavations suitable in size to the thickness of the cross. Put the cuts of the cut with cups down, covering them the transverse log. From the boards to make a tabletop and consolidate it with nails. To put on the souls intended for them.

How to make benches from branches or fin?

This is the most creative occupation. Finding in the forest or on the shore of the reservoir beautiful snags and polished fins, you can make furniture of amazing beauty (Fig. 8). Each such a bench is unique, because it is difficult to find 2 identical branches. Therefore, solutions options, how to make a bench from Korjigi, may be a lot.

The main thing for all such products is one thing - the fitting of the parts is performed right on the place under the already finished legs, seats, backs. Branches should be harmoniously intertwined, forming a design that will endure the weight of an adult. For connections non-standard details You can use self-tapping screws, and nails. The most reliable is the connection to the sewage and glue. Where it is desirable for a dense fit of pieces of construction, squigs can be pushed with an ax.

The most original benches can be made of branches and fins.

Such decorative benches can be used even to decorate the premises in the style of Chalet or Rustic. They are wonderful combined with a wild stone finish. Harmonious they will look in the garden among flowering bushes or near the reservoir.

A variety of bellows models that can be made with their own trees, endlessly.

The main thing in the manufacture of wood furniture is the thoroughness of fitting parts.

Then the finished product will be neat, without distortion. Processed by moisture-proof impregnations and varnished or paint, any seat in the garden will last for many years.

To make a loan online enough on the MFI website, fill out the application form containing the passport details, the desired loan amount and some other information. Also, if you plan to receive money on the map, you will need to have a personal Visa or MasterCard with CVV2 for funds.

The decision on the application is accepted from a few minutes before half an hour. If the loan amount exceeds 30-50 thousand rubles, the application is considered manually, which affects the time of its consideration. The rate of receipt of money depends on the selected method of obtaining - to the account, on the card, on the electronic wallet or cash and from the loan amount. Money is translated at any time of the day, as well as on holidays and on weekends.

You can increase the loan period for a period of 1-30 days. In some cases, if there is good reasons, the loan extension is carried out without overpayments. In other cases, additional commission fee is paid for the loan prolongation. The number of possible extensions must be specified in MFIs.

For the first time you can take the amount from 1 thousand rubles to 30 thousand rubles, depending on various conditions. The size of the first loan affects the amount of the income of the borrower, the loan period, the presence of good credit history, conditions for certain programs.

The MFIs checks the validity of the passport through the FMS base, the registration address, the borrower's contact details, evaluates its solvency, looks open office work on the basis of FSSP. Online customer profiles are checked by an automated scoring system. Data from BKA, bank card information is also checked.

Bad credit history is not yet a reason to expect refusal. If ki is corrupted by the creditor bank, you can contact the BKA with a statement. In other cases, you can try to fix it with a chain of consistently taken and timely rejected small microloans.

If the loan does not give, you should find out the reason. For example, get your ki and study it - there is no overference there formed by the fault of banks. Maybe you have accumulated debt on utility payments - it needs to be reproached. It can be repeatedly referred to the MFI for obtaining a smaller loan amount. Some successively taken and timely returned small loans will improve your position in MFIs.

If money will not be returned to the MFI, you will be charged with penalties during a certain term provided for by the contract. If during this time you will not get in touch and do not return the loan, your business will be transferred to the collector agency that will work with you to resolve the method of refund. If you avoid communicating with collectors, the case will be transferred to the bailiffs that:

1. arrest funds on a salary card;
2. limit the departure abroad;
3. will arrest your personal property.

In a country house or in the country, each person wants to have only high-quality and multifunctional garden furniture, which will not occupy a lot of space, and at the same time will perform maximum functions on the household plot. Therefore, the transformer bench will be an excellent solution for joint tea-party in the family circle. There you are at the same time a shop, and the table, and most importantly, you can make this design with your own hands.

Bench Transformer - Description of the construction, principle of operation

Such a bench for a country house is a fairly simple design, which can be easily transformed into a table with two comfortable benches. And in the folded embodiment, this is a regular bench with the back and handrails. It will not occupy a lot of space on the territory of the household site and at the same time will be able to fulfill all its functions in full.

Functions and convenience benches

This is a compact and practical bench that is easily turning into a fairly spacious table and two comfortable benches. Due to the high degree of mobility, you can install it anywhere in the household site.

The only disadvantage of such a bench is its considerable weight, as a lot of wooden boards will leave a lot of wooden boards, but it will be sustainable enough, reliable and durable, if you do everything correctly and accurately on the developed instructions in compliance with all technological processes.

Preparation for building construction: Drawings of the project with dimensions

Before starting to build a bench - a transformer, you must prepare all the materials and tools, and also make a good drawing or find it on the Internet.

We offer you a typical drawing - a bench's scheme - a transformer with the dimensions specified on it. The most difficult action is to create a mobile mechanism, so initially it is necessary to prepare all the blanks, which will then be collected in a single transformational structure.

For the manufacture of bench - the transformer will need to purchase lagged edged boards and a timber. It is best for such a design larch, birch, pine, beech, ash or oak (if it turns out, since it is very expensive).

The board must be well polished, have high quality and comply with all conformity standards. If you buy a board on a sawmill enterprise, you will definitely ask the quality certificate to their products, since under the guise of the cutting board of an oak you can sell a completely different product, and if you do not understand the wood, then it is best to take a carpenter with you, which disassembles the species Boards and her quality.

Material Calculation and Tools

To build a bench - transformer we will need:

• Two bars with a cross section of 90x45x1445 mm;
• Five bars with a cross section of 90x32x1480 mm;
• Two bars with a cross section of 90x45x1445 mm.

To work, we will need such tools:

Stages of making shop-table

1. The first step will be the production of a frame of the frame. To do this, it is necessary to cut 8 of absolutely identical bars with a length of 70 cm and on them to be at the bottom and at the top of the oblique cuts (also the same), in order to be able to get the perfect equilibrium with a further installation of the design under a specific slope.
2. Next, we make a frame under two benches made of polished edged high-quality board. Cut four cuts of 40 cm and as many segments of 170 cm. On all boards, the angles must be cut off so that you can then make two completely identical rectangles a little oblong shape. For their docking, we use special cooked screws or nails. But for the beginning, drill the drill the same holes in the boards (the length of the boards is 1.7 meters).
3. In the framework of the design it is necessary to make several strong strengthening elements that will further form a comfortable seat. To do this, we take a wooden bar and nail it in increments of 500 mm. So we divide the design to the sections and protect the future bench from lateral deformation.
4. The legs must be screwed to the seat at a distance of 10 centimeters from all corners diagonally. We do it so that the jokes are near the "seams" or a little further. It is very important to make the highest quality elements of the design, that is, fix on 2 or 3 bolts that pass through the timber and the upper part of the cooked legs. The bar need to make grooves in which we will hide bolt hats. And under the nut we cut off the hacksaw too much.
5. Next, we make a rectangular element of 70x170 cm from the bar, which, from the inside, connect with additional parts that ensure the stiffness of the structure. In the future, we use this item for the backrest or countertops.
6. At the moment, the framework we do not close the shields, as it will be difficult to collect all the mechanism in a single whole. Also complicated the transfer of the design.
7. Three elements of the element we connect to the common system. This work is quite complicated, as it will be necessary to work with large parts of the future bench - transformer. It is best to produce all work on a smooth floor or on a special big table. All connections we make moving and fasten them with hinges or ordinary bolts.
8. Cut off two 40 cm long bar for fastening them between the bench and the shield of the table at the corners. They will be at the bottom of the shield, but with the side of the benches itself.
9. Cut off two more bars with a length of 110 cm so that the back is inclined. Brepping them with self-draws or other mounting elements in another bench, but in this case the fastener is placed not from the neighboring side, but in the very center. Otherwise, we will not be able to properly connect two benches together with each other.
10. After we collect the entire design, and you will carefully check the work of each rolling element, it will be possible to begin to stem from the outside. To do this, we take the edged well polished board, but you can take a bar or chipboard (if the bench - the transformer will not constantly stand on the street). Thus, we performed the technical stage of work.

The bench - the transformer can be covered with a veneer and then water-repellent varnish that the yacht decks are painted. Varnish dries about 36 hours. But still a bench, covered with varnish, is not recommended to keep on the street in the rain and snow.

If the design is performed correctly, and you will care for it, it will last you at least 20-25 years. Very often, the masters replace the tree with the metal, which looks not so beautiful and aesthetically, but the service life is significantly increased.

Second version of the transformer bench made of metal profile and wood

Materials and Tools for Design

Bench - a metal profile transformer is made similarly wooden, but only with some changes.

For the manufacture of such a bench, we will need:

Stages of manufacturing design

1. We clean all metal profiles from rust so that then it was easy to work with the material - cooking pipes and paint them.
2. And then according to the drawing drawn, cut the workpiece size in size.
3. We make a frame of seats. To do this, weld the pipes as shown in the figure and, if necessary, enhance the design.
4. In the future, this design will perform the role of the table as well as the bench back. We also had to change the angle slightly.
5. Weld up another seat.
6. After the implementation of all welding works, we begin to drill holes and twist everything on special furniture bolts (their length should be at least 60 mm). Then we insert the washers between the iron elements so that it is easier to decide.
7. Here we see the final version of the bench - a transformer, where an additional durable leg is drawn to one of the beats and a few changed the angle and feet in the second shop, since the angle of inclination was treated in the back, and it became sharper. In order for the bench does not shift, it was necessary to digest the design.
8. For the legs, cut the "heels" with a size of 50x50 mm made of metal sheet so that the bench is more stable and not "drowning" into the ground, if it is on a soft soil.
9. Depending on the size of the design, we cut off the board and span them well. It will be our seats of shops and the surface of the table.
10. As a result, we get an excellent finished design bench - transformer.

Finish shop

Then we all the boards do so impregnate with an antiseptic agent, with antipyarem and let them dry. Strace with water-repellent varnishes, oil or acrylic paint. We apply a varnish or paint into several layers.