"Eaulet" - Step to warmth and comfort. Those times passed, once that the market of thermal insulation materials could be counted on the fingers. Technical progress and competition in the ranks of manufacturers contributed to the fact that today the problem of choice has become more relevant to the problem where to buy money. In confirmation of these words, you can bring the fact of the appearance on the modern market such material as an escape.

ISOVER ISUPTER: Meet closer

By its structure, this thermal insulator is very close to the classic mineral wool. And since she had a sufficient list of shortcomings - manufacturers of new products tried in their product to minimize the "minus" and give the insulator new positive qualities.

The structure of the isois is the smallest fiber up to 150 μm long and a thickness of up to 5 microns.

For reference

Micron (MKM) - the length of the length used in the measurement of microparticles. One thousand microns is equal to one millimeter.

The first to achieve such a finely structured substance was managed to technologists of the French concern Saint-Goben (Saint-Gobain). The discovery, as well as the technology that received the Abbreviation "TEL", managed to quickly patent that not only predetermined the favorable position in the market, but also predetermined the primacy in the market.

It was 1957. It was then on the basis of the minerals of the basalt group and quartz, a substance was obtained, similar to the characteristics with a stone wool widely used at that time and even superior to them.

The appearance on the market of the new insulating material was, in truth, stunning, and until 1980 Saint-Goben owned the status of the only manufacturer of thermal insulation materials to almost all of Europe.

Meanwhile, the laws of the market and competitors did not agree with this. Thus, wering on the laurels demanded new and new solutions from Saint-Gobains, expanding the range of products and conquering new markets. So in 1995 an escape hit Russia. In 2007, Russian representative office and a plant for the production of insulating materials "IsOnder" were opened in the city of Yegoryevsk. Today, its annual output is more than 70,000 tons, which is one of the best indicators in Europe.

Interesting fact

The trading mark of the insulation belongs to the French concern "Saint-Goben". According to the last Rating of Forbes, he is in the hundreds of the richest companies in the world. One hundred seventy thousand employees of the company in sixty seven countries of the world provide Saint-Goben turnover at the level of 40 billion dollars.

For what the insulation "Eau return"

The main characteristics of the insulation, the avoor belongs:

• Thermal conductivity;
• Sound insulation;
• Resistance to burning;
• Vapor permeability;
• Long service life;
• Environmental purity;
• Convenient packaging form;
• Small share.

The laboratory is the installed thermal conductivity coefficient of the material an order of 0.041 watts / sq. Meter - today is considered the best among competitors. It should be added that this coefficient It remains unchanged even through years of operation.

The texture of the carrier provides for the presence of aircraft, which ensures the material to absorb the sound. Thus, sheets and mats of this min. Wools can guarantee acoustic comfort not only weakening unnecessary noise through the inner partitions, but also isolate the extraneous noise from the outside of the structure.

Events devoted to the compliance with the All-Russian standards confirmed that the istener belongs to the class of non-combustible substances. This made it possible to expand the use of this thermal insulator for almost any object - from industrial buildings to schools and kindergartens.

Parputability is another property of the material, where he has few competitors. The ability to absorb moisture and quickly give it here guarantees the presence of fiberglass.

It should be noted that the main purpose of irregular is to maintain heat - it is very dependent on the content of moisture inside the substance. So, for example, increasing humidity of mines. Wool only worsens its main ability to 10% at once. Effective decision This problem may be an air layer (2-3 cm) between the sheets of the heat insulator.

The unique composition of the heat-insulating isoover guarantees the preservation of its qualities for almost the entire service life of the building (40-50 years). In addition, the glass fibers beat off the desire of insects and rodents to equip their housing and nests in this thermal insulator.

Types of packaging

A number of tests confirmed the ecological purity of the heat-insulator an av. This is confirmed by mandatory and voluntary certificates of compliance with environmental standards.

Of course, in different parts of construction - whether it is the outer walls or partitions, the floor or roof is convenient for use can be various performances of the heat insulating material. This in the company Saint-Goben is paying non-minor attention. We list the most popular forms of packaging and the size of its heat insulators.

The standard and most popular packaging of isoov - mats, rolled into a roll. We give its main dimensions:

• Thickness in the unfolded form - 50 mm and 100 mm;
• Width of the canvas - 1220 mm;
• Mata length - 5490 mm and 7000 mm;
• Area - 6.7; 8.54; 13.4 and 17.1 sq.m.

Completion "Mini-mat" also claims the role of a leader in popularity:

• Thickness -50 mm;
• Width - 610 mm;
• Length - 8200 mm;
• Area - 10 sq.m.

The "Roof" equipment has a range of packages depending on the insulated roof area and the required degree of isolation:

• Thickness -50, 100, 150 mm;
• Width - 1220 mm;
• Length - 4000 and 5000 mm;
• Area - 4.88; 6.1; 12.2 m.

Another type of packaging, which we read the builders - "Semi-rigid mats" - "Warm walls":

• Thickness - 50 and 100 mm;
• Width - 610 mm;
• Length - 1170 mm;
• Area - 5 and 10 square meters. m;
• Packaging pieces - 7 or 14.

Not to spoil the mood

Since one of the main components of the Isovera is fiberglass - its application technology provides for some security measures. So in order for the installation of the insulation is absolutely safe, comfortable and pleasure - you will need:

• Clotting access to open parts of the body;
• Lungs, but dense mothers gloves;
• Glasses;
• Gauze bandage or respirator.

The eau today is dozens of varieties of thermal insulation materials. Saint-Goben does not cease to hold the company - Saint-Goben to strive for perfection, modernizes production and improves technology. There are specialized options for thermal insulators:

• For private and industrial house-building;
• For thick walls and partitions;
• For flat and palm roofs;
• For floors and ventilated facades and much, much more.

Thus, any builder can be found in the line of goods from the French leader in the production of thermal insulator solutions for each object. At the same time, to be sure, for the quality of this material is confirmed by the practice and experience of using worldwide.

Summing up, make a conclusion that the solution in favor of the heat or noise insulating material under the brand "Road" is a right step towards quality and reliability, to warmth and comfort of your home.

• Video

Video

Isover (ISUP) - in the world market occupies a leading position on the manufacture of insulation for any type of construction.

Plates of the company The avoever is considered the most best insulation in the construction market. Most of the production of the insulation of the ISOVER insulation occurs abroad, but in Russia, the insulation is produced in the Moscow region, in the city of Egorievsk. A large plant that produces heat and noise isolation, in addition to the fact that the plant is the only one who is engaged in the release of mineral wool based on quartz and basalt.

Practicality

Due to the preserved form, the material does not change
When installing

Firmly mounted to a frame, wall, not allowing cold penetration

Thanks to the elastic properties for mounting, additional fasteners are required.

Thrift

Communal cost savings up to 70%

It does not require a lot of space for transportation, since the material is well compressed

Safety

The permeability of the steam allows the insulation to "breathe"

When working with insulation there is no dust

Heating, does not evaporate toxic substances

Environmentally, does not harm environment and human health

Material is resistant to ignition

What you need to know when choosing insulation

Thermal conductivity coefficient (λ)

Choosing thermal insulation products first, it is necessary to pay special attention to such an indicator as a coefficient of thermal conductivity - λ (lambda). The smaller the value of the lambda, the better the house can be insulated, due to the fact that the thermal conductivity value displays: how much heat passes through the insulation per unit of time.

The thermal conductivity coefficient is measured as W / (M * K). (Watt on the meter on Kelvin)

Types of thermal conductivity coefficient (λ)

Dry lambda (installed by the manufacturer at the factory):
λ10 - thermal conductivity coefficient fixed at 10 ° C. An indicator that is declared by the manufacturer.

Wet lambda (installed by the manufacturer with different degrees of humidity):
λ and λb - thermal conductivity coefficients for various conditions operation (SP 50.13330.2012). Measurements are carried out licensed laboratories at humidity of materials 2% and 5%. The coefficient is used for thermal calculations in construction.

Choose the insulation by the value of thermal conductivity, because the lower the coefficient, the more effective the house will be insulated. For example, if the value of thermal conductivity is 0.036 - this will be enough so that 50 mm heat shocks are replaced by 95 cm bricks

What insulation to choose: in plates or rolls?

All ISOVER products have high elasticity this means that the material is tight and steadily resting without using additional fasteners. Both rolls and plates are used in different designs. The form is determined depending on the room.

• Convenience when insulation of large surface area, ease of installation due to the fact that one roll can be inspired large square at home.
• When used, fewer joints appears, and therefore, the passability of air flow decreases.
• Small consumption of material.
• Suitable with a non-standard step rafters, ease in cutting on the required width.

• Recommended for the insulation of small rooms.
• Suitable when working for one person.
• Muspilles are recorded without applying additional fasteners.

Specifications of the insulation of quartz-based escape

Below are universal and popular ISOVER insulation made on the basis of quartz. Each model has its own characteristics and advantages in different applications. With the help of a visual table, you can easily determine which insulation better suitable In your situation.

• Overlaps over the basement
• Heat insulation of floors at home
• Floors on lagas

• Outer side of the walls for siding

Specifications "Warmhouse Eau":

• Interior walls
• Thermal insulation floors by lagas
• When choosing a heater with a thickness of 100 mm suitable for:

• Frame walls outside

TECHNICAL SPECIFICATIONS "EROP Warm House Plate":

Suitable for use:

• Wall insulation outside and inside
• Floors on lagas

Specifications "Eaulet Warm Roof":

• The outside of the walls of the house
• Internal parts of the house
• Heat shields balconies and loggias

Suitable for use:

• Roofs, attic, attic, scope roof

Specifications "Warm Wall Eau":

• Suspended ceilings
• Inland walls and interroom partitions
• Attic and scope roof
• Lagam overlaps and floors
• Attic and scope roof
• Insulation floors and basement

Specifications "Eau from a quiet house":

• Ceilings
• Walls

Specifications "Sauna's escape":

Montage Minvati Eau do-it-yourself

For thermal insulation of various designs, the manufacturer has a wide range of products. Thermal insulation material should be selected based on its characteristics (mainly by density) and manufacturer's recommendations. Mates with a small density are better suited for horizontal surfaces, it is better to buy plates with high density for thermal insulation walls.

Famous in the world since 1937, the Brend Eau or Isover has been selling its products in Russia and the CIS for several decades. Heat insulation Eau returns are mats, plates and rolls from stone wati and glass gambles. Today we'll figure it out in their features.

The ISOVER brand belongs to the French company Saint-Goben with headquarters in Paris. The company was founded in distant 1665 by order of the French king Louis XIV. By the way, it is noteworthy that then the company was engaged in the manufacture of mirrors and glass. And in the name of the brand "IsOVER" two words "isolation" and "glass" are used. Today in Russia, the brand has two plants on which insulation makes. One makes materials from stone fiber, another of fiberglass. Heat insulation isover In Russia used to be sold under the name "Walway".

Purpose

In its ruler, the manufacturer has several dozen items of materials intended for insulation and noise insulation:

· Facades;

· Partitions;

· And other objects.

Below are schematically shown areas of these materials.

General characteristics of insulation "IsOVER"

Perhaps, within the framework of one article, it is difficult to pay attention to each direction in the line, so we will reduce exemplary general characteristics These materials.

The main characteristics of the insulation escape:

• Thermal conductivity: 0.031-0.041 W / m2 * k;
• Combustion: from g1 (weaklyor) to ng (non-combustible);
• Parry permeability: 0.50 - 0.55 mg / MCHPA;
• Lifecycle: up to 50 years;
• Air permeability is 120 * 10-6m3 / m × s × pa;
• Thickness: from 50 millimeters.

These are only averaged indicators, always behind the most accurate indicators to go to the official website of the manufacturer. Below in the table, we give the example more accurate characteristics of light insulation.

Also for information, we give a table characteristics Eau return Classic

Stone Vata.

Minvata Eau return is made at the factory in Chelyabinsk, and are only available in the form of plates with different rigidity rates.

Minvat Isover is the following product line products:

· Facade master;

· Acoustic;

· Optimal;

· Standard;

A little later we describe the features of each representative of this line. Mineral wool itself is more expensive than fiberglass materials.

Plate size as always 1,200 per 600 mm. Thickness, differs and is given in the sizes table below.

Glasswater

The cheaper and more frequently used glasswater is presented in the product line:

· Warm roof;

· Warm walls;

· Warm house;

· Silent home;

· Classic escape (classic escape);

· Scope roofing;

· Sounds;

· Frame p;

· Frame m;

· Facade Light;

· Ventfasad;

· Floating floor;

· Sandwich Life;

· Quiet and warm roof;

· Warm (universal, only for Siberia).

Let's pay attention to three popular types of materials:

· ISOVER KT 37;

· ISOVER KT 40;

· ISOVER KT 37.

Description of materials. Both first material are soft rolled fiberglass mats. However, the figures in the index include the ISOVER KT 37 to the corresponding 37 grade of thermal insulation, and the KT 40 is a twin insulation - two mats are laid on each other. The total thickness is 50 and 75 mm.

The KT 37 and 40 ratio of the corresponding - 0.037 and 0.040 W / m K. The width of rolls in both cases is the same 1220 mm. For both, it is necessary to build the crate and use materials for internal insulation of walls and other internal work. The density is about 15 kg per cubic meter. Sometimes you can also meet the labeling of Isover KT Special (CT Speech) is a heater in the rolls of the same series. Below are the data in more detail.

Insulation escape 37 and 40 specifications and dimensions:

ISOVER KL 37 Material in the form of mats (soft plates The escape has a density of 16 kg / m3). This series is inherent:

· Roofs;

In those places where the load will not be loaded on the insulation (that is, in the frame and in lags).

Below in the table you can see the characteristics of Isover KL 37

Model CL 34 has a smaller thermal conductivity than 37th.

For sauna exist separate species Foil material. One side of the mat is covered with foil, which prevents its wetting.

The density and dimensions of the irregular correspond to the GOST. The declared parameters of the insulation, the avoor and technical characteristics correspond to the market as a whole.

Cost

The cost of the insulation, especially during the crisis, is a particularly important topic. In this article, we will not be able to give prices for all options, but still main show.

For example, a "Sauna" model in a roll of long 6250, 1200 width and 100 mm thick will cost approximately 1,400 rubles.

IsOver KL 37, 10 plates in the package, the stove thickness of 100 mm will also cost about 1,400 rubles.

Scope roofing, 20 plates, 100 mm thick each, will cost 1000 rubles.

We present the screenshot of the cost from the popular online store.

- One of the leading manufacturers of mineral wool fiberglass thermal insulation materials in the world. These insulation have proven themselves as high-quality products with an optimal value ratio and operational characteristics.

From this article, you will learn what types of thermal insulation the escape exist, their characteristics, and what they differ among themselves. We also study the reviews and find out than these minorizing insulation are better than similar products presented in the market.

1 sphere of applying thermal insulation escape

Thermal insulation materials from the French company is an escape, in addition to excellent insulation abilities, also have good noise-canceling properties, which significantly expands the scope of their use.

3 eros KL 34

A slab insulation whose thickness can be 5 or 10 centimeters. This material is designed for frame mounting, and does not require mandatory fixation of the dowels. KL34 models, as evidenced by feedback, is peculiar to high elasticity, which makes it possible to install it on any surface.

KL34 plates are supplied in the packaging pressed 2 times, after the opening of which, the material immediately takes the initial shape. The thermal conductivity of the kl34 is 0.034 W / MK, vapor permeability - 0.53 mg / MCHP.

Among the advantages of this model it is worth allocating recovery after any deformations and shrinkage resistance. The nominal compressibility of KL34 under the specific load in 2000 Pa is 60% as y, and the return after compressive loads is 98%.

KL34 corresponds to the gramifications class NG - completely non-combustible material, and can be operated in the temperature range from - 70 to +250 degrees. The absorption of moisture KL34 with full immersion in water for 72 hours is 5% of the total mass of the plate, with a partial immersion for 24 hours - 1%.

Line of insulation escape to (l - slab, T - rolled)

4 "scope roof"

The material intended for the insulation of the inner surface of the roof of the house. The release form is a plate with a thickness of 5 or 10 centimeters, length 117, and a width of 61 cm.

The advantages of cotton wool roofing can be attributed to high hydrophobicity - the material practically does not absorb moisture even with full immersion in water for a long time, which makes it possible to effectively use it in complex wet conditions, in which the remaining insulation would lose their heat-insulating abilities.

Specifications The "scope roof" escape is as follows:

• thermal conductivity coefficient - 0.035 W / MK as y;
• coefficient of conductivity - 0.55 mg / MCPA;
• Screwing moisture with incomplete immersion for 25 hours - 0.08 kg / m².

The density of this material is 15 kg / m3, it shows quite good deformation properties. According to the fuel system, the scope roof refers to the class of non-flammable materials NG, which makes it possible to use it for thermal insulation of industrial premises.

Plate area in one package of such a heater is 14.27 m², the weight of the packaging itself is 10.8 kg.

Installation of insulation avoor "scope roof

"

5 Eau return KT37

The KT37 Rolled heat insulation material for the insulation of the inner parts of the buildings from concrete, brick, wood and aerated concrete. Consumer reviews indicate that it is perfect for insulation from inside the walls, attic or inter-storey overlap and lag.

CT37 refers to the category of soft thermal insulation, the material has a density of 15 kg / m3, which does not allow the use of this material on surfaces experiencing serious mechanical loads.

Compared to the original roll volume, the packaged CT37 is compressed almost 2 times, which greatly simplifies its transportation, the volume of one package is 0.16 cubic meters, after disclosure - 0.71 cubic meters.

The thermal conductivity of Isovera CT37 as comparable to the remaining insulation of this company, it is 37 W / MK, which makes even a single-layer insulation of this mineral wool quite effective.

The KT37 roll thickness can be 50 either 100 mm, length - 630 cm, width - 60 cm. Roll form of the insulation makes it possible to cover large surfaces much faster than it can be made by slab material. The product is classified according to the European Standard A1, which corresponds to our NG class (non-combustible material).

6 Eau return KT40.

The KT40 is a two-layer thermal insulation material produced in the shape of a roll, intended for wall insulation frame houses, installation in the middle of false walls and thermal insulation of free space inside hollow brick walls.

The KT40 roll thickness is 100 mm, while, due to the two-layer design, the product can be divided into two rolls of 50 mm. The overall characteristics of KT40 are as follows: the length of the roll is 700 cm, the width is 61 cm, the area of \u200b\u200bone packaging of the insulation is 17.08 m².

By thermal insulation properties CT40 is somewhat inferior to the rest of the company's products, the thermal conductivity coefficient is 0.04 W / MK. Material has high vapor permeability (about 0.5 mg / MPa) making it optimal option For insulation of walls of wooden and frame houses.

According to the combustibility standards, GOST 30225 KT40 refers to the class of non-combustible materials NG. This mineral wool is not intended for thermal insulation of surfaces with a complex wet operating mode.

The moisture absorption of the material with a partial immersion is about 15% of the total mass, as a result of which, when installing KT40, it is better to install an additional waterproofing layer.

7 Eau "V"

8 "Standard"

Mineral wool "Standard" is a universal version for not loaded thermal insulation of any surfaces. it perfect solution For insulation of walls and facades of buildings from any materials - wood, brick, concrete, gas-silicate blocks.

With the help of a standard plate, you can successfully insulate the roof, the attic, roof, the floor or the ceiling of the house.

Structure of mineral wool avoor "Standard

"

This insulation has a density of 38 kg / m3, which allows it to be used as a facade thermal insulation for the subsequent application of wet plaster.

Technical characteristics of watts Standard are as follows:

• The coefficient of thermal conductivity according to GOST 7076-99 - 0.035 W / MK;
• The coefficient of steam conductivity is 0.3 mg / MPa;
• Water absorption with a partial immersion for 24 hours is 1% of the total mass of the slab;
• Nominal compressibility under the influence of load in 2 kPa - 8%;
• Class of the flammability according to GOST 30244-94 - NG (completely non-combustible material);
• Permissible temperature mode operation - from - 80 to +700 C.

The "Standard" error is produced in the form of plates whose width is 60 cm, and the length is 120 cm. Thickness is 5 or 10 cm.

Who wants to live in a cold apartment, or sit in the office, whose walls are cheese and freezed? High-quality thermal insulation will not only provide comfort, but also will help save considerable means on the heating of the room, reducing heat loss, which is inevitable with lapty structures. Among the insulators, which are actively used to improve the heat resistance of our homes and apartments, the mineral wool occupies a special place. Made from this material. As far as it is effective, how to use it correctly and where to apply? All the answers are collected in our current article.

What is the insulation of the warman?

Thermal insulation is produced by Saint-Goben Group of Companies. Its experience in the construction market is very impressive, because the manufacturer has released the first products in 1937. To date, these insulation are used in the construction of each third European and every fifth American home.

1. Flame carriage. Rather, I will say, the material based on fiberglass. It is obtained by melting silicate raw materials at high temperatures. Through the holes with small diameters it comes, literally, an infinite thread. It is so flexible and durable that it can literally, weave. It is in this way that the insulation based on fiberglass is manufactured. If earlier this material often reproached in insufficient security for a person, then modern technologies Production made fiberglass much more environmentally friendly. With the help of thermal insulation based on glass fiber, floors, walls, partitions, facades and roofs are insulated. The glass insulation is produced in the form of plates, blocks and rolls. And ISOVER KV-050 is generally a stadst cotton, which is applied to the surface of a special sprayer. Thus, the integrity of thermal insulation design is ensured, the use of use, and the absence of cold bridges increases the efficiency of the heat carrier.
2. Heater Out of Stone Fiber Based Made from mountain breeds and slag metallurgy. Raw materials melting in blast furnaces at a very high temperature. Under the action of gravity, the melt flows freely through the holes of different diameters. Then it is once again exposed to thermal exposure. The material resulting from a complex manufacturing process has magnificent heat insulating characteristics. Basalt insulation is an escape in the form of blocks. It is used to insulate the attic floors and floors, for the pitched roof, walls, frame structures. They insulate facades, balconies and loggias.
3. In the rich assortment of products, the carrier can be found and new. For example, recently released two-layer membrane Provides additional vaporizolation, improves the property of the heat insulating material used, and also creates additional protection against bacteriological activity, for example, forming fungus and mold. This material makes it possible to extend the durability of thermal insulation structures, although, strictly speaking, is not insulation.

The main characteristics of the insulation escape

The company has produced thermal insulation materials for many years. various destination, Improving the production and final properties of the product. What is the main characteristics of heat-insulating materials avoor?

• Materials for insulation walls. They differ depending on the scope of use, and the functions of the base surface. For example, for industrial construction as a basic material for insulation of frame structures, a rolled insulation based on fiberglass is used. It has a thermal conductivity of 0.04-0.044 W, can be in thicknesses 50.75 and 100 mm. It is easy to install without special fastening elements, just in space. The same frame walls You can be insulated with basalt battali Light. It has a thermal conductivity of 0.36 W, has a thickness of 50 or 100 mm. Material plates can also be installed in space.
• Facade insulation. It requires special approaches to the creation of the heat insulating layer. For insulation of ventilated facades, you can use fiberglass ostima. It has a minimum thermal conductivity coefficient equal to 0.032 W, a thickness of 50 or 100 mm, can be reinforced with glassball. This type of material can be used as a single-layer insulation or as an inner layer in a two-layer design. The basalt insulation of the ventilation avoor also has a very low thermal conductivity coefficient (0.035 W), can be used in any types of buildings, without limiting height, has good strength. For plaster facades, the thermal insulation is well suited by fiberglass-based. It is specially designed taking into account the application of thick plaster, has a thermal conductivity of 0.34 W, and has quite high strength.
• For insulation floors, a number of products have also been developed. For example, a heater is suited for the floor under the tie, the fiber-based floating floor floor. It has high strength characteristics, as well as a special connection "Schip-groove", which provides increased clutch of plates of material. Floors on lags can be insulated with the help of mineral wool an output of the optimal, which is quickly mounted and does not require additional fasteners. Low thermal conductivity coefficient provides a high degree of thermal insulation.
• Reliable thermal insulation of the roof will help ensure the escape of the scope roof. This material is based on fiberglass, has a high moisture resistance, installed without fasteners. The slabs of the pitched roof can be a thickness of 50 or 100 mm. For flat roofs Well suits the insulation based on basalt fiber Izaver Ruf. It can be used as an independent insulation, and as part of multilayer structures. It has increased density and strength, low thermal conductivity coefficient, low water absorption. Plates of material can be a thickness of 100 or 150 mm.
• Technical isolation from this manufacturer is produced under a separate trading mark of the isothek. This type of materials is intended for thermal insulation of pipelines of various purposes, air ducts, ventilation systems, flame retardants from fire (for example, in the manufacture of fireplaces or the design of baths and saunas). This isolation finds its use in industrial construction and production. With its help, not only technical pipelines, but also tanks, boilers, exhaust devices are equipped. Technical isolation of the isothek is produced in the form of rolls, mats, cylinders. It can be the firmware, foil, reinforced fiberglass. Depending on the tasks set, you can choose any material from almost two dozen products based on basalt fiber and glass gambles.

Properties of thermal insulation escape

The use of insulation is due to their properties. Maintains density and thickness, thermal conductivity and strength, the ability of the material to withstand temperature differences and a variety of loads. What are the properties of the insulation an avo?

1. Non-hatching. Neither basalt wool, nor fiberglass support burning, do not form burning droplets or suffocable smoke. In order for the mineral wool to start melting, the temperature of 1100 degrees will be required. This property allows the use of the insulation an avoor as a fire-resistant isolation.
2. Good heat resistant performance. They are explained by the low thermal conductivity coefficient of the materials. This indicator fluctuates in the redistribution from 0.032 to 0.44 W. Thus, the material creates a reliable barrier that prevents the heat outlet out of the room, which is the main purpose for the insulation.
3. The coefficient of moisture absorption of the material does not exceed 1 kg per 1 square meter surface material. This, subject to the finding of the insulation completely in the aquatic environment during the day.
4. Insulation, an avoever has high vapor permeability characteristics. This indicator ranges from 25 to 40 m / m * Spa. Many specialists disagree in opinions, is it good "breathable" insulation? After all, with an unsuccessful combination of materials in an insulating design, the assigned pairs can "stuck" in the thickness of the wall, creating at the same time high humidity. On the other hand, air permeability provides natural ventilation of the room. One thing can be said accurately - using fiberglass-based insulation and basalt wool, closely follow the combination of thermal insulation structures.
5. The density of the insulation is an escape from 50 to 195 kg per cubic meter. Less density materials are used to insulate internal partitions, floors. Large density plates are appropriate when roof insulation, certain types of facades and floors with high load. The higher the density of the material, the less its porosity and weight. Therefore, different density indicator different species Isolation The escape helps differentiate materials on the scope of use.
6. Insulation, the escapes have all the necessary certificates, including environmental purity that allow the use of materials not only for external, but also for internal works.

A wide range of insulation the escapes that can be clearly divided not only by manufacturing material, but also on the areas of application, the extensive experience of the manufacturer, the extensive network of dealers and sellers throughout our country makes this type of thermal insulation very popular and sought-after option. It finds its use in industrial and residential construction, isolation of various purposes and various characteristics. You can purchase material in construction stores, and through the Internet commerce network.