Heated towel rail - an indispensable thing in any bathroom, because It helps to eliminate excessive dampness, maintain hygiene and, of course, dried personal belongings and towels.

In case of replacement of old plumbing on a new and need for finishing work In the bathroom it makes sense to think about replacing the former heated towel rail to the new more aesthetic. Current manufacturers offer a wide selection of design and design of these devices. They have increased durability and reliability in combination with elegant external species.

Before purchasing a new coil for the bathroom, pay close attention to the material from which it is manufactured, and the design features.

Main species

Depending on the principle of operation distinguish next species Dryers:

• Water operating. Can be attached to the heating supply system or hot water. Beneficial to what to minimize fee for utilities;
• Operating from the mains. Independent from the supply of heating and hot water and durable (no corrosion). Easy to be installed in a convenient place for you, the main thing is that the power supply is nearby.
• Combined. There are a combination of previous 2 types: hot water circulates in the heating season along the contour, and during periods without heating there is an opportunity to include ten to heal water.

By type of design, devices are divided into:

• Horizontal. Have a form of usual coil;
• Vertical. Made in the form of a staircase with jumpers.

Heated towel rails are cast from black and stainless steel, as well as brass and copper. The latter, despite the high cost, have the longest service life. Material should be chosen based on the specific situation.

So, in case of connecting to the central heating system, seamless steel seamless rails are more suitable. Their design is designed for pressure up to 8 bar and is not afraid of hydrowards. In AGV systems, pressure actually does not exceed 3 bar, because the optimal choice The dryers made of chrome brass with various variations of form and design.

It is worth noting the models with the adjustable distance from the surface of the facing to the dryer. Setting a greater distance, you will provide good air circulation and faster drying.

Most modern models are equipped with a Maevsky crane, which allows you to take the radiator contour. In the new designs there is a bypass jumper for pressure leveling in the circuit. By installing additional ball crane On the jumper, you can adjust the working temperature of the heated towel rail. It will not hurt to install cranes on the supply and reservoir of the coil to quickly cut off the main pipeline in case of dismantling or repair.

Do not forget to pay attention to the installation size between the bores of the supply and removal of water. Especially when you plan to put a new radiator in place of the old. Depending on the distance between the centers, there are models with distances at 30, 35, 45, 50, 60, 80 cm.

Installation and connection to the heating system or hot water supply

Installation of the heated towel rail is not very simple and requires certain knowledge and skills.

Rules and Installation Rules

Requirements for connecting a heated towel rail to hot water supply systems are set forth in SNiP 2-04-01-85.

The installation itself consists in connecting the inputs and conclusions of the radiator circuit with the corresponding heating risers or a plumbing fittings using plastic pipes. Pipes, couplings and taps are collected together with a special finger.

To connect a new product, we can also use metal-plastic and copper pipes, but it is worth considering a number of features. In the shepherd metalplastic pipes, the diameter of the section is less than in plastic, and they poorly withstand pressure drops. Copper, despite the durability, will cost a solid amount, and their welding requires special skills and precautions.

For the correct operation of the heated towel rail, it is necessary to provide a small slope of the supply pipe in the direction of hot water flow. For the entire length of the eyeliner it is 5-10 mm. The water duct must go from the upper point of the device in the lower. For this, the upper particle of the radiator is connected to the hot water supply.

The gap between the contour pipes and the surface of the walls should be set aside. It is at least 35 mm for pipes with a cross section of up to 23 mm and 50 mm for pipes with a cross section of more than 23 mm. Distance data is adjusted by a stud, screwed into the bracket, but there are still fixed mounts in which this distance cannot be changed. Supporting construction design should not be fixed hard to compensate for the temperature expansion of the pipes and do not load the parts bearing the walls.

Necessary materials

Before installing, check the completeness of your purchase, carefully read the design and diagram of connecting a new device, read the instructions attached to it. Prepare all the necessary tools and materials for work, this is:

• directly heated towel rail;
• brackets;
• PVC pipes of the desired diameter (26, 32 mm);
• pVC pipe cutting knife;
• screwdriver;
• turbine;
• fasteners;
• hammer, construction level;
• 2 reclining keys;
• packle or other seal;
• 2 brazing nuts;
• soldering iron for PVC pipes;
• 2-3 ball valves,
• PVC knee,
• 1 PVC knee with internal thread,
• 2 tees (if you install the jumper),
• 1 coupling with internal thread.

When facing work in the bathroom is not completed, you can connect to AGB using two water seals. American women can be purely metallic to connecting the supply and taps of the radiator if metal threaded fittings have already been removed from the highway.

Please contact the company that serves your heating networks and water supply networks with a request to overlap the water supply at the time of work on dismantling. And only after that, proceed to the process of removing the old coil.

As a removal of an old radiator, it is worth paying attention to the wear of the riser to which he joined. If his condition leaves much to be desired, it makes sense to replace it partially or completely. It will be worth it to ask the opinions of the neighbors from below and on top, suddenly they will support the idea of \u200b\u200bchanging the riser completely. In any case, even if you can replace only at yourself, it is necessary to do this with the calculation so that old pipes do not remain overlaps and the places of compounds with new sites were visible and accessible. Signing the segment location, the grinder cut the part of the riser along with the coil.

On the cut ends of the pipes there is still a thread to be cut and a thread-cutting machine is useful for this. In the construction markets and in stores are universally selling or given this tool for rent. From the ends of the cut pipe by the turbine, remove the chamfer, set the larch the desired caliber into the tool socket and securing on the end of the pipe, gradually cut the thread.

Welding pipe

Among pipes for connecting plumbing, steel, copper and polypropylene are most often used. The latter are beneficial to the simplicity of installation, immunity to corrosion and a favorable price.

Plus, the spike process between propylene pipes is very simple and easy to learn. For independent work, the following tools will be required:

1. Set of set of necessary caliber
2. Truborez or Kusachachi
3. Facremifier
4. Sheer (to remove aluminum layer from pipes)

We recommend purchasing a hotel in a specialized store to be confident in quality. Included with the solder themselves, nozzles of different sizes always go and the original stand on which it can be fixed. Reliable welding can be performed only by a high-quality device, so we do not recommend saving on it.

At the beginning of work, make up a scheme for yourself, taking into account the size of the plots, the location of tees, cranes and taps. To be guided by it will be convenient for accuracy of assembly and saving materials. Also, the scheme will minimize the number of adhesions by weight.

Cut the sections of the required length with the help of a breech or pipe cutter. Apply the chapecter at the ends. According to the chamfer, there is a slope of 15 degrees and a length of 2-3 mm. Do not forget to clean the cut edges of the pipes from burrs and crumbs for more reliable welding.

To connect the end of the pipes with couplings, heat the room to 260 degrees and place the elements in the nests of the corresponding nozzles. The coupling is put on the pin on one side, and the pipe is inserted into the sleeve on the other side. The heating time will be determined by the diameter of the element and the thickness of its walls. It is normalized by international standards and can be found from the corresponding tables. Alone, it is possible to determine the readiness for the spike you can sroll the element on the heating surface: with sufficient heating, the pipe or coupling will be swipped smoothly and removed from the nozzle without effort.

Preheated coupling and pipe connect immediately after removal from the soldering iron. At the same time, try to put them smoothly towards each other and push until it stops, but it is not worth putting on force. Change the position of the connected parts can be literally for 3-5 seconds after the connection before they finally grab.

Installation of bypass and cranes

Bypass jumper, although it is not a mandatory element, but can very care if necessary repair work on the installed heated towel rail. Elementary replacement of sealing pads on the connecting places of the coil to the riser will require overlapping the flow of water in it. And this means submitting an application to the LCD and additional costs. Prognizingly turning on the jumper and overlapping cranes in the connection scheme, it is possible to cut off the contour of the dryer from the main line into the case of repair or in order to save.

When mounting, the jumpers can be used both steel and copper or polypropylene pipes. Since working with the metal provides for a complex welding procedure, the rational will collect bypass from plastic pipes. To cut off and regulate the duct in the desired sites, we will need 3 ball valves. By installing one on the jumper itself, and two on the fittings of the feed and return water can block the water supply to the radiator, cut off it from the riser. By adjusting the position of the crane on the jumper, you can reduce or increase the water supply in the circuit, and thereby adjust the heating temperature.

Installation and connection work is carried out in several stages:

• Cut the water supply.
• Remove the old coil. In the event that it is connected to a threading - unscrew it with divorce keys. If the serpent is welded to the riser - cut it together with the pipe using the turbine.
• Mount the ball valves and jumper.
• Screw the crane of Maevsky to the bypass for the convenience of the system tolerance.
• Places for future attachments are placed on a pencil wall. I set the mark horizontally using the level pointer.
• Serve the holes on the marks and drive a dowel in them.

• Having placed the heated towel so that the holes coincide, screw it with a screwdriver. Do not forget to withstand the desired distance from the wall to pipes and adjust it if there is a stiletto bracket.

• To connect with fifth and return water fittings, use fittings from the kit. They can be straight or corner. Threads do not forget to seal the packles or another winding. You can use FMU to seal conical threads. Mounting the device, be sure to set the minimum laying slope (5-10 mm). Tighten the catch nuts, pre-laying a turnkey soft cloth so that the scratches remain. In the ends of the nut set the sealing gaskets. You need to delay smoothly and without extra effortIf difficulties occur when turning the key, unlock the connection and set the exactly connected items. Hanging the nut to the end slightly degenerate, but do not overdo it in order not to thread the thread.
• Having finished the assembly, you can feed water into the radiator. Seamlessly open the water supply to avoid the hydrowarder. Slightly shut down the valve on the jumper to release air from the pipes. When water begins to swell from it, you can close. Intergently inspect and swallow all the welds and threaded connections to detect leaks.

Installation of an electric or combined heated towel rail

As in the considered version with a water dryer, installing electrical and combined models begins after dismantling the old device. Connecting the electric heated towel rail will have to spend after removal of the old device.

It is noteworthy that with the help of a competent approach, you can use the device that operates from the central heating to equip the heating cable. In this case, the cable with the thermostat will be charged inside the pipe through the bottom liner of the heated towel rail.

For the correct and safe operation of the electric dryer, you must adhere to several requirements. The energy consumption of the Ten will be 1 kW at least and to connect it will have to withdraw a separate outlet. From it, in turn, the conduction is stretched by a cross section of at least 2.5 square to the electricity itself. The line for nutrition is necessarily equipped with an automatic fuse.

By choosing in favor of a device with an electric heater, you can not depend on the time of year and the heating season. You can use this device quite economical, including it only when it is really required.

Ground

The key point is grounding of the heated towel rail. The location for fastening the ground wire is usually already provided by the manufacturer. It remains only to put a protective outlet and pave it into the shield three-core wire. In case the grounding through the panel for some reason is not provided, you can implement a "reinstallation" - make a jumper between zero and the ground. Such grounding is performed at the minimum distance from the shield.

As you can see, installing and connecting electrical and combined dryers will require certain skills and knowledge of working with wiring. Implement similar or to trust the experience of professionals - to solve you. Sober evaluate your strength and do not risk if not sure in a qualitative result.

The heated towel rail helps to quickly get rid of the excess moisture in the bathroom and dry the wet accessories. New models of "dryers" not only perfectly cope with the lack of microclimate, but also decorate the interior. However, the attractiveness of the design is simply obliged to combine with functionality, do you agree?

Useful information on how to choose the best equipment for the arrangement of the bathroom, we are pleased to share with you. The submitted article outlines the information collected in the course of real preparation for the purchase of the device. It dismantled all questions that can arise from the buyer.

We offer you detailed description The characteristics you want to pay attention to the acquisition. Here is a review of products from the manufacturers leading in the segment. The selection criteria are justified by weighty arguments, the information was confirmed by photos and video recommendations.

The bathroom is the most wet place in the house and an apartment, so it is necessary to provide additional heating of the room. Heated towel rail It helps to quickly dry towels or underwear, prevents the appearance of mold and eliminates the reservation of the floor and wall decorations.

Besides, modern models are stylish decoration The interior of the bathroom, as progressive designers are constantly working on the appearance of devices.

Chrome-plated wood-shaped towel rail is the perfect version of the water design with the traditional location of the elements, convenient for drying wet things. Installed in the free zone on the wall

Water heated towel rail As standard, it has the appearance of a curved pipe, in the middle of which hot water circulates. If the water supply ceases to circulate, the performance of the product is stopped.

Choosing water heated towel railFirst you need to take into account the level of pressure in the pipes. According to the current building standards and the requirements of the GOST, the water pressure in the water intake reinforcement is more than 6 atm.

When choosing a dryer for a towel connected to a centralized DHW system or to water heating, find out which pressure is able to withstand the device

The water pressure in the pipes of apartment buildings can be 2.5-7.5 atm. The indicator depends on the place of construction, the quality of communications and the number of floors in the building. In private houses, usually 2-3 atm. Therefore, before purchasing, it is necessary to learn the indicators of the plumbing system and add multiple positions to the hydraulic blows to the resulting value.

Water efficiency heated towel rail Depends on the pipe sweep area. The original design in the form of the ladder has the ability to give the maximum amount of heat and easily transfers the hydraulic blow.

When choosing a dryer, you need to pay special attention to the diameter of the pipes. In some cases, a special adapter is required for mounting and connecting a heating device.

The greater the total area of \u200b\u200bthe pipes, of which a water heated towel rail, the greater its heat transfer. If you do not suit the devices from thick pipes, it is better to take a device with thin but often located elements

Basic criteria for choosing a water model

Bathroom repair involves the replacement of outdated plumbing equipment, including heated towel railconnected to the hot water system (DHW) or heating. When choosing a heating device, not only the external attractiveness of the product should be estimated, but also the strength of the material.

Not every model heated towel rail It is able to withstand regular operating pressure drops that occur in the heating centralized system of apartment buildings.

It is worth considering that peak pressure values \u200b\u200bin pipes can reach 10 atm. Therefore, it is important to know which specifications And the peculiar features of the heating device should be paid first.

Important is correct. In most cases, the installation is carried out before the start of finishing finishing works in the bathroom.

This is significantly saved by finance and time spent on mounting work. Many installation problems are easier to solve using modern electrical models.

In most cases, the installation of water dryers is produced in bathrooms with a connection to the heating pipeline or to the hot water supply system

Appearance heated towel rails

In form heated towel rails water type can be divided into several different species. Standard models include heating appliances that have a kind of curved pipe. Externally, they can resemble the letter "P" or "M".

IN last years Modern models of heating structures of unusual sizes and shapes are gaining popularity. For registration modern interiors Consumers often consider models of progressive design, for example, in the form of a zigzag or ladder, represented by manufacturers in different modifications.

Heated towel rails in the form of the letter "M" and "P" is characterized by heat transfer to 500 W. Laconic models will be useful in baths of limited area

Upgraded models are available to consumers that may have additional functionality of the shelf type. Today, designer types of dryers are gaining popularity that may have original forms. In this case, the practical device will become a stylish jewelry of the bathroom, add a bright and unique note in the interior or will emphasize a certain style.

The modernized heated towel rail in the form of a ladder will not only perform its direct functions, but also stylishly decorate the bathroom

Thus, the modern market offers a large selection of water models heated towel rails A variety of forms:

• ladder;
• zigzag;
• U-shaped;
• M-shaped;
• P-shaped;
• drowned;
• double-circuit.

Besides standard models Water heaters for the bathroom, consumers are offered exclusive designer models. They are distinguished by intricate unique design.

Advanced thermal devices - the best way for modern design. Wave-shaped heated towel rail is perfect for modern bathroom interior

The structures or special hooks are sometimes added to the designs of the original shape. External attractiveness and practicality is reflected in the cost heated towel rail.

Priority material manufacturing

During the choice of a heating device of water type, not only on the technical characteristics and shape of the product should be focused. It is important from what material it is manufactured. In the production process of water heated towel rails Use the following materials:

• stainless steel;
• black steel;
• non-ferrous metals (brass, copper, aluminum).

There are chrome, polished and painted water heated towel rails. If the owner of the house or apartment decided to change the heating device in the bathroom, it interests it, from which material it is better to choose a heating device for drying towels and linen.

To do right choice, analyze the features and characteristics of water structures from different materials.

Instruments from ordinary of steel.Steel - Iron alloy with carbon and other elements. Specifications and properties of steel depend on additional components.

Reliable heated towel rails From durable black steel almost no different from structures from ordinary stainless steel. Steel radiators are perfectly conducted and covered outside with a special layer that protects it from corrosion.

Water heating devices made of iron are considered the most budget option and are ideal for consumers who want to save. The lack of models of this type is a relatively short life life of the product.

If you do not have a significant amount of funds during repair, then the Iron Unit is the most optimal option.

Steel coolers with powder protective-decorative coating are in high demand due to the low cost of products and a universal design suitable for bathrooms of various styles

Heated towel rail from iron and its alloys is suitable for country houseswhich have an autonomous heating system. The fact is that in the apartment, the radiator from this material is faster rust, clogs the impurities and salts settling daily on the inner walls of the pipe.

This significantly reduces the service life of the device, so specialists are not recommended from steel to the centralized heating system.

Heated towel rails Stainless steel.Heating devices for bathroom made of stainless steel are reliable units that will serve the owner for a long time.

To the main advantages heated towel rails From the stainless steel, their property can be withstanding high pressure and corrosion resistance. Stainless steel models have excellent thermal conductivity.

To disadvantages of such heated towel rails You can attribute the high cost of products. For the price they are several times more expensive than steel and copper structures. In the modern market, you can meet the budget analogue of the radiator - heated towel railPainted under stainless steel.

The minus of the product - in violation of the rules of operation, it quickly loses an external attractive view.

Water heating devices for drying stainless steel towels and linen are more expensive than products from a conventional steel alloy, but they will serve much longer

Regardless of the water quality of a water radiator from a stainless steel will hold a long time. There are chrome, polished and painted water heated towel rails Stainless steel. In order for the radiator from steel to rejoice for a long time with his attractive appearance, choose chrome models of a domestic or imported manufacturer.

Brass and copper devices.Heated towel railsMade from brass pipes are the "golden middle" between the two types of steel radiators.

The material has an attractive golden color, which gives it part of the components. Brass turns on the copper alloy with zinc, more often with iron, aluminum, tin and other elements. This is the most common copper alloy, characterized by plasticity.

The service life of a aesthetic heated towel rail from brass or copper is 5-10 years old, but with gentle use, it increases markedly

Water heated towel rails From brass or copper are not affected by corrosion, it is a bit more expensive than similar stainless steel products.

The maximum allowable pressure that can withstand such a brass or copper radiator - 6 bar. In connection with this feature, they are perfectly suitable for installation in private houses, in which water pressure usually does not exceed 3-4 atmospheres.

Method of fixing devices

An important point to which you want to pay attention to when choosing a water radiator for the bathroom is the method of fastening or installation. Although the installation is not a very difficult task, it requires the attraction of a professional for proper installation. A qualified specialist not only competently perform the installation of the unit, but will also save the manufacturer's warranty.

All types of water heated towel rails Connect to risers, as they must be connected to the existing water supply system or heating. They fix them most often on the wall, less rare on the wall, with a floor. Installation option depends on the specifics of the model and the preferred installation option.

Gallery of images

# 1: Installation of wall models

When choosing between fastening on the floor or wall, the tenants of apartment buildings are more likely to prefer the wall mounting. This is the perfect option for premises with limited area.

Wall-mounted heated towel rails are relevant for small bathrooms, where many furniture and appliances are usually located on the floor.

In a small bathroom, such a design can take a place of a towel bracket. If the bottom of the wall is lined with tiles in the bathroom, you can install heated towel rail Below or above the border or buy a device that can be mounted on a bathroom wall with a level drop.

# 2: Installation of outdoor devices

Established Near Wall Outdoor heated towel rail Can perform features of additional heating of the room and contactless drying. For example, you can place over a water radiator hanger for bath towels.

At the same time, the warm air raised from the water device will dry the wet towel. The bath will look more attractive than with woven things on her walls.

The floor heated towel rail is the device of the original non-standard design, which will decorate the bathroom in the classic, retro or modern style.

Disadvantages of outdoor heated towel rail: It is not suitable for a small bathroom and requires additional repair work.

Connection options "Dryers"

Choosing water heated towel railIt is necessary to take into account the way of connecting the structure. There are 3 main types of connectivity:

• Side. It is used for vertically elongated devices. This is the most versatile method suitable for standard snakes, systems with "recessed" pipes and for individual ladder models.
• Lower connection. It requires the presence of cranes of the Maevsky and normal head of hot water. Suitable for dimensional models, often applied in the ladders.
• Diagonal. This connection method ensures efficient water circulation, requires additional pipe gasket. Suitable for large structures, ladies and their modifications.

One of the most popular types is a heating device with side connections. Such models are in demand due to the features of the device and simplicity of connecting the unit to the plumbing network. When buying lateral heated towel rail It must be borne in mind that some models are not suitable for standard domestic systems.

The model with side connections is distinguished by aesthetics due to the hidden system of communications. The pipe with the coolant is disguised in the wall

Generally accepted diameter of risers in apartment houses - 1 or 1.4 inches. According to foreign standards, the connecting dimensions are 3/4 or 1.5 inches. If you have acquired heated towel rail With such dimensions, you must additionally purchase a special adapter, with which you can perform installation work.

Design and size heated towel rails

For the bathroom of any style you can choose water heated towel railwho harmoniously fit into the surrounding interior. Large selection of devices allows you to pick up suitable option Products under classic, ultra-modern and other style directions.

A significant role in choosing the device attracting the device for drying towels is given to the external coating of the product. Many modern manufacturers prefer to use water coverage heated towel rail Popular materials today - chrome and polished brass.

If you wish to create an exclusive interior, you can pick up models of radiators designer design With the effect of made up gold, bronze, matte nickel and others. The main condition is to selected heated towel rail corresponded to the style of the bathroom.

The heated towel rail, made in retro style, will become an accentuating element of the interior. Copper and brass are perfectly combined with natural materials: wood, stone, brick

Water radiators for drying can include additional items. These are shelves for storing bath accessories, hooks for linen and bathrobes, etc. Previously decide whether there is a need for such additions, since each additional function increases the final cost of the device.

You should pay attention not only on the design of the heating device, but also on the size of the product. It is important how many towels will be able to simultaneously dry on the radiator and will not spoil the cumbersome design of the aesthetics of the room.

Large-size heated towel rail (with a large total tube long, long or wide) additionally performs the function effective heating Premises

Should consider that heated towel rails With a large surface area, underwear and towels are heated faster. If in your plans not only to dry the towels, but also to pull the bathroom, pay attention to the larger structures of the radiators.

Additional equipment functions

Modern - energy efficient Fixtures that are beneficial to constantly leave in the ones. This is due to the fact that for heating the initially cold radiator, the temperature is required, significantly large than is required to maintain heat already preheated device.

Manufacturers, taking into account the wishes of all consumers, developed models of devices for drying, equipped with lock switches and timers. Progressive models allow you to achieve a given temperature without outside interference

The presence of a timer allows you to set the activation program of water heated towel rail Before taking a shower or bath. Thanks to this towel, it will be warm when it will be needed.

Switches and timers can be built-in or act as a convenient separate option. Some models are equipped with a thermostat to maintain the desired temperature temperature according to your wishes.

On the rules and schemes for connecting electric "drying" you will learn by reading our site.

Manufacturer: Domestic or Imported?

Great demand in the modern market of radiators is used as heated towel rails domestic producers and overseas counterparts. Italian, German and Finnish trademarks deserve special attention from imported models.

Consumers are offered a variety of heating devices, starting with budgetary aggregates of traditional execution, ending with non-standard premium-class devices

If you consider the fact that the products of European manufacturers are mainly intended for connecting the radiator to the heating system. Products of domestic manufacturers are usually focused on connecting a construction to a centralized hot water system.

European manufacturers do not take into account the quality of water circulating water pipes and use thin-walled steel as material. In this case, the inner walls of the radiator usually do not have an anti-corrosion coating.

For hot water, water is used, which includes mechanical suspension, salts and chemical impurities. These elements contribute to the appearance of corrosion, and the suspension is settled on the walls of the device, reducing the inner diameter of the pipe. Especially this negatively affects the place of bends of the product.

The water coming from the water supply system does not contain oxygen, and the coolant from the boiler is enriched with them, which is why many choose heated towel rails Domestic production, which are adapted to the terms of our communications.

Water heated towel rails of domestic production Sunerja Podaz - high quality for affordable price. Pressure - up to 25 atmospheres, cost - 12,500 rubles

Metal low quality is sensitive to various impurities and quickly loses its operational properties and comes in disrepair. To insure from poor-quality products, it is necessary to give preference to proven and reliable manufacturers.

In addition to famous global brands, companies with budget options work in the market heated towel railswhich strictly follow the quality of products.

Important characteristics of water modifications

If you want to buy the most economical and relatively inexpensive model, it is better to stop the choice on standard M-shaped or P-shaped products. They are great for the arrangement of a small bathroom.

To install such a water design, you will not need to breed or change pipes. To dry the towels, it is enough to connect it to the pipeline.

In order to dry a significant amount of towels and linen, as well as for heating the room, choose models with fairly wide pipes. It is desirable that they are made of anti-corrosion and wear-resistant stainless steel.

During the purchase heated towel rail Be sure to specify. Models, similar to the usual radiator, can be connected exclusively to the heating system.

When choosing the optimal model of water heated towel rail It is worth paying particular attention to the fact that it cannot be corrosion, it was able to withstand sharp pressure drops and various kinds of hydrowards.

Before you pay for the selected product, carefully inspect it for the presence of dents, chipping chips, if it is, scratches. Examine the quality of welds and connections

If you do not have an idea about the features of this product data, it is recommended to use the services of professionals. It will save you from the need to repaid in case of unsuccessful installation of the design.

To acquire high-quality and durable water heated towel rail, pay attention to the coating of the product, the execution of welds and threads on the ends. It will not prevent the availability of appropriate certificates for purchased products. In addition to the warranty coupon, a hygienic coupon with the name of the manufacturer must be included.

Conclusions and useful video on the topic

The roller will clearly familiarize themselves with the dominant aspects of the choice:

We tried to give you general ideas about water heated towel railsthat will help in choosing the optimal model. Considering the material of the manufacture, the degree of stability of the product to corrosive processes, technical specifications and features of the instruments, you will be able to choose the optimal model heated towel rail.

Want to tell you how to choose a heated towel rail for your own bathroom? Have questions in the course of familiarization with the article, want to inform interesting information? Please leave comments below the block below.

Today, the heated towel rail is not only a heating device that supports optimum temperature in the bathroom, but also important element interior. There were those times when people did not pay attention to what the equipment looks like. Today, every homeowner wants to have in his bathroom high-quality, beautiful and reliable plumbing and devices. What secrets need to know? First of all, it should be understood that this drying is precisely. Formally, it is a plumbing product designed for drying linen and towels. However, in reality it multifunctional elementwhich makes the bathroom warm and dry.

The quality of heated towel rails to be paid attention to when choosing

To purchase a truly reliable and durable device, pay attention to the following points:

The presence of a hygienic passport;
- availability of a passport for equipment;
- there is a warranty card, with the name of the manufacturer's company prescribed in it;
- The state of the outer surface. Before selecting a heated towel rail to install in the bathroom, you should carefully examine it outer surfaceIt should not be irregularities. Also pay attention to the quality of the thread - the connection should not have burrs.

It is known that water circulating in the water supply system contains dissolved oxygen, which can cause corrosion of pipes and instruments. Every year new solutions for this problem appear.

A vivid example of such a solution can be called a double-circuit heated towel rail, equipped with a heat exchanger capable of protecting pressure from jumps and steady aggressive medium. No less effective way The fight against corrosion is the use of stainless steel stainless steel products in the production of sanitary products and such non-ferrous metals as copper, plumbing brass and aluminum. However, the use of copper drying is recommended where all the water supply is made of copper. But aluminum and brass dryers are perfectly combined with pipes from metalplastic.

Heated towel rails are made from seamless or suture pipes. The cost of seamless products is slightly higher. However, all models must meet the requirements of SNiP and GOST.

Classification of heated towel rails in appearance:

Standard. The devices have a conventional form, while the bending to the profile resembles the beech "P" or "M";
- upgraded. Equipment complemented by shelves;
- Design radiators. They represent the designs of different forms that are not only characterized by high functionality, but also play the role of excellent design design. The heat transfer of such devices can reach 2 kW (for example, a "Foxtrot" or "Lestenka" heated towel rail).

The modern market offers a wide range of plumbing products for bathrooms as domestic and imported performance. Based on the operational parameters, it is necessary to give preference to the products of domestic production, as they can be connected to the heating system, and to the water supply system. European options are intended directly for the insert in the heating system.

If you cut imported analogs in the water supply system, there is a great risk of corrosion development, since for the most part they are made from black steel. It is worth considering that the heat carrier moving through the pipes heating systemdoes not contain dissolved oxygen, therefore heated towel rails are less susceptible to corrosion, while in water supply systems, water produces a boiler, water in which is more saturated with oxygen.

Good circulation of the coolant can be provided with circulating pump low power. Due to its work, almost any drying will be able to achieve heat transfer equal to 2 to W.

Types of bath towel rails:

High heat transfer coefficient;

Low electricity consumption;

Lack of risk of leaks;

Ease of use;

Corrosion resistance;

The degree of heating is controlled by the thermostat.

Water or oil acts as a working fluid.

• water. Today it is the most popular and practical products for bathrooms. They are connected to the HBS system or the heating system. Before making your choice, make sure that you can be a genderly seizer of proper quality. After all, this plumbing product will operate in elevated temperatures, may experience strong pressure and hydraulic blows. Having preferred products of proven manufacturers, you will get a device that will serve you for a number of dozen years;
• combined. Such models have absorbed all the advantages of electrical and water analogues. Externally, they practically do not differ from their "fellow", however, they have heating elements. This product is produced from pipes, the connection to the system is carried out through an intermediate heat exchanger. The cost of such a heated towel rail is slightly higher, in comparison with water, but high quality, strength and safety of the device is quite justified.

Equipment is attached in a stationary and turning method.

The size of the bathroom, the level of humidity and the ability to fasten the equipment in the place where accommodation is planned are important when choosing a heated towel rail. Carefully studying the peculiarities of the bathroom, you can correctly select the model of the towel rail. Pay special attention to the method of supplying hot water, room layout, diameter and material material. Today, a heated towel rail is not only a heating device that supports the optimal temperature in the bathroom, but also an important element of the interior. There were those times when people did not pay attention to what the equipment looks like. Today, every homeowner wants to have in his bathroom high-quality, beautiful and reliable plumbing and devices. How to choose the right towel dryer, what secrets need to know? First of all, it should be understood that this drying is precisely. Formally, it is a plumbing product designed for drying linen and towels. However, in reality, this is a multifunctional element that makes the bathroom warm and dry.

The advantage of electric heated towel rails is that they can work autonomously when the heating season ends, and besides, it is much easier to be installed on the wall. Criteria selection data devices a bit. Basically, when buying, you need to pay attention to the type of heating, power, form and, of course, the manufacturer. Next, we will tell you how to choose an electric heated towel rail for the bathroom for the price and quality.

Type of heating

There are three types of heating: cable ("dry"), liquid ("wet") and combined. In short, consider the advantages and disadvantages of each variety.

In the first case, the pipes are heated due to an insulated cable located inside. This version of execution is recommended to choose if you only need to dry the bathroom towels. If you decide to choose an electric heated towel rail and for heating the room, the cable model will not fit, because Most often has small power. This is the main drawback of the "dry" heating. At the same time, the positive moment of choice is that cable models are cheaper, spend less electricity, the temperature is incremented faster and besides, it is much easier to mounted.

Liquid electric heated towel rail It is recommended to choose if you need to additionally warm the bathroom. Devices with "wet" heating have a higher power, as well as longer remain warm if you turn off them (but at the same time heated longer). At the same time, the lack of such models is considered higher cost, increased electricity consumption and the need for strictly vertical installation. As for the latter, it is impossible to call it a disadvantage, because In 99 out of 100 cases, they are carried out strictly in a vertical position from aesthetic considerations.

Well, the last, combined models are recommended to choose if there is a sufficient amount of money, because The cost of devices operating from central heating and from the mains is significantly higher. The advantage of these devices is that they can work from heating in the autumn-winter period and when the hot water is disconnected from the network.

Review and reviews of specialists on this issue you can see on the video below:

Review of the merits of products

With options for execution of devices figured out. Now let's talk about how to choose an electric heated towel rail through the rest of the parameters: power, manufacturing material, form and manufacturer.

Power

The second, no less important selection criterion is the power of the heated towel rail. To properly select the device model, it is recommended to calculate on the area - 140 W / m 2, which is quite enough for drying things and additional heating of the bathroom, even if there is a small window in the room. If the room in heating does not need, for example, you decided in the bathroom, you can choose the power less, without applying the calculation by area.

Here, again, do not forget about the fact that the models with the "dry" heating are much weaker and at the same time cheaper!

Material of manufacture

Most often, electrical heated towel rails are made of conventional steel, stainless or non-ferrous metals. As you understand, the first version of the fulfillment is the best, but at the same time the most short-lived. This is due to the fact that the steel is additionally covered with an enameled coating, which over time begins to swell and collapse. Recommended for home and apartments to choose a stainless steel heated towel rail, which is chrome in addition to this. Such a model will be optimal for the price and quality and at the same time durable. Devices made from non-ferrous metals (mainly alloys of copper, brass or aluminum), have the highest heat transfer, but due to the fact that they have a high price, are much less used.

The form

As for the form, you can choose an electric heated towel rail of any performance. To date, the following form devices are popular:

• ladder;
• E-shaped;
• snake;
• M-shaped;
• U - shaped;
• with the upper shelf;
• swivel.

The most popular is a ladder, which perfectly complements the interior of the room and besides practical to use - you can spend a lot of towels and linen. We recommend when choosing to pay attention to the products with the upper shelf on which you can put clean towels, saving the place in the bathroom.

I would like to pay special attention to mobile electric heated towel rails. Their advantage is that the device can be easily rolled to the balcony or in the kitchen. In addition, when installing, you do not need to drill the walls. If the bathroom is big, think about choosing a floor heated towel rail.

Well, there are design models of products that will not only cope with drying towels, but also complement the interior of the bathroom. Self interesting decorations We provided in the photo below:

By size, you can already choose the appropriate option based on the room area. It is clear that the more product is, the better the heating will occur.

The presence of a temperature regulator

It is very important that the controller is installed on the case, with which you can specify a certain temperature mode. On liquid models, the regulators are more common than on cable versions. This is due to the fact that the first higher power (up to 2 kW), which must be adjusted for the economical operation of the device.

The question is how to choose a heated towel rail, you need to decide at the start stage of repair, and not after it is completed. There are several reasons for this: first, they differ in size and, secondly, by means of connection. In this article, along with the site, we will deal in all kinds and sizes of existing towel rails to choose a suitable Santechnicor.

What a heated towel rail to choose

How to choose a heated towel rail: Does the value of the form

There are only two traditional forms used for the manufacture of heated towel rails - this is a serpentine and ladder. To the question of which heated towel rail to choose, I will answer this: the ladder is much more convenient in operation. It allows you to dry things along the entire length. In addition, significantly more underwear is placed on such a device. And, as a rule, in the heated towel rail "Lednka" more square Heating, which means that the bathroom will be warmer. The question is brewing why then many people give preference to the coil? There are two reasons: the first is low cost (it is usually twice as lower than that of the ladder), and the second is the installation conditions. People just do not want to additionally pay for the alteration of riser under the towel rail in the form of a ladder.

Heated towel rail-snake photo

In addition, there are combined heated towel rails that combine elements both "lades" and a serpentine. To be more accurate, then they belong to the ladder, as they have the same connection principle - snake-like nozzles are simply added to it, which make it possible to perform the operation of the heated towel rail.

Towel dryer Forest photo

The size of the towel rail is no less important than its form

Almost all currently produced heated towel rails differ in size. On the one hand, it is not too important classification, but on the other - it is not without it. The main parameter that determines the solution of the issue, how to select the size of the towel rail, is the distance between its liners - the size of a multiple 50mm is considered standard. There are heated towel rails with a distance along the centers of a supply station from 300mm to 700mm - all other dimensions fall out for the standard size.

How to choose a heated towel rail

In addition, heated towel rails may have different width. Some confusion may arise here - the Lestenka heated towel rail is the width of the width and is the distance along the centers. The second size is a height that can vary from 400mm to 1200mm. As for the coil, then everything is just the opposite - the distance along the centers causes its height, and the width can vary from 400 mm to 1000mm.

How to choose the size and shape of the towel rail

Choosing a heated towel rail to dimensions, one thing should be taken into account - he must harmoniously fit into the room, but it will make the principle "fit or not fit on the wall" will be wrong. It is important that he does not look massively and did not attract unnecessary attention.

Secrets of choosing the described Santhekpribors look in a video that will tell about how to choose a heated towel rail for the house.

Heated towel rail from what material it is better to choose

To date, only three materials are used for the production of heated towel rails: black steel, copper and stainless steel. It is even good, do not have to break your head long over the question of which water heated towel rail to choose.

1. Black Steel - a budget optionWith a weightedness. Here you and the rapid rust rates, and the exfoliation of the chromium coating. Such plumbing devices acquire very risky, as they are made in most cases from suture thin-walled. And if it is used a solid tube, the cost of such heated towel rails is equal with the price of such devices made of stainless steel.
2. Stainless steel - these sanitary pribers could be called eternal if it were not for one "but". Stainless steel heated towel rail is strongly exposed to the so-called wandering currents, which is critical in apartment buildings. These soot "beat a stainless steel", turning it over time in the sieve. In addition, if you are going to perform an independent replacement of the heated towel rail, then you should know that the threaded compounds of stainless steel are very capricious. You want to securely seal their palauls, you will have to dull the thread so that it does not cut it. As a rule, stainless steel heated towel rails do not have a protective coating - to achieve the mirror glitter they are simply polished.
3. Copper - heated towel rails from this material can be called eternal. The lack of such plumbing devices is the cost - this is the most expensive view of the towel rails. In addition to the fact that copper itself is by no means cheap metal, so also the technology of its soldering and chromium is not cheap.

Copper heated towel rail for bathroom photo

What to choose: electric or water heated towel rail

The classic genre is considered a water heated towel rail, connected to the heating system or hot water supply. The last case is used exclusively in those situations when hot water circulation is ensured.

Solving which heated towel rail to establish (water or electric), it is necessary to be guided solely by one principle - the presence of a permanent source of the liquid coolant. If you do not observe in your bathroom with disinfect in your bathroom with hot water, then you can safely mount the water heated towel rail. If its stable work is violated by the absence of hot water, it is better to give preference to an electric heated towel rail.

Electric towel rail photo

How to choose ? The criteria for its assessment is somewhat - low power consumption and the presence of a thermostat that provides control the desired temperature. In all other, you should pay attention to the form and the material, and size.

At all the ideal option For apartments and houses with interruptions in the supply of hot water there will be a so-called combined heated towel rail, capable of working from electricity, and from a liquid coolant. There are no such devices on sale, but it is enough to make it yourself. To do this, you will need to buy a "Lestenka" heated towel rail, connect it to a source of hot heat carrier with the help of cranes, using the eyeliner only on one side. In the remaining two build a crane of Maevsky and a TEN with a thermostat (the latter is installed in the lower liner). Now, if there is a coolant, we open cutting cranes and provide the operation of the heated towel rail from the central network of heating, and in the absence - close them and turn on the electric heater.

How to choose a heated towel rail to the bathroom

Well, in conclusion, several tips that will allow you to finally decide how to choose a heated towel rail. Special attention should be paid to two things - these are specifications (especially working pressure) and eyeliner diameter. The last moment is especially relevant when replacing the old heated towel rail.