Implement repair in an apartment or in the house is only half of the success. It is important and maintaining its condition for a long period. Difficulty may arise, as small children or pets in a short period of time to spoil wallpaper in a short period of time flooring, Doors and other finishing material. Most of all may suffer exterior angles The walls that are located on the "pass", for example, in the corridor or in front of the entrance to the room. Is it possible to get rid of such an effect on the walls of the house and how will the additional trim of corners in the apartment help?

For such a material for finishing the apartment, like corners, there are several destinations:

• visual angle alignment;
• protection against damage that are inevitable in an apartment or house, especially where pets live;
• protection against pollution;
• decoration and design of walls.

In addition, such a decorative finish of the corner can successfully apply to improve the appearance of doorways, window plumbing and design of the joints of the panels. Their use may be limited only by the fantasy of the owners of the apartment. Thanks to the large selection of decorative corners, you can easily choose the most optimal option For any room.

Advantages of plastic decorative corners

Installation options for finishing materials on the corners of the walls

From the view of the corners will depend on their installation. Plastic products can be fixed using additional means (specialized glue, "skimpical" carnations) or with the help of an adhesive layer, which is already applied to the inner surface of the corner. The explicit advantage of the second variant is the flexibility of the product and the possibility of its breaking at any angle. But not all the material, with which the walls of the walls can be carried out, there is an opportunity, still in the production process, apply glue composition. For example, an artificial stone belongs to this finishing material. It consists of tiles of different sizes that are made of concrete or plaster. Decorative stone can decorate any external angle in the apartment. It is very popular about the design in this way of modern hallways or living rooms (photos can be viewed on Internet portals).

Regardless of the selected type of fastening of this decorative elementThe finishing of external corners should be made only after the repair of the walls is completed. That is, all necessary work: Wallpaper are packed, paint is applied, decorative plaster, etc.

Installation of plastic decorative corners

Before starting to install, make sure that the wallpaper, the paint layer or plaster fright sufficiently, in order not to damage them with a plastic surface. Also, you should purchase an adhesive tool that will be used to fasten the decorative corner. In the event that a self-adhesive model is used, the need for the acquisition of such a means disappears. Please note that the adhesive layer on such corners is covered with protective paper, which should be removed before glue to the wall surface.

As mentioned earlier, it can also be used as "fasteners":

• cloves without hats;
• liquid Nails;
• sealant.

When buying liquid nails, it is followed to pay attention to the fact that the means does not have high strength (the degree of strength is indicated on the package, as well as the list of materials with which this means can interact). Since when used with plastic products there is a risk of separating them. Liquid nails with high strength are intended for heavy (metal) parts.

Despite the fact that decorative plastic corners can visually transform uneven walls of the wall, it is necessary to determine what the level of "curvature". To do this, you can use a conventional ruler or a flat board: it should be applied to the edges of the corners, between which the irregularities are located and analyze the degree of "distortion". If the transition from the smooth wall to the curved noticeable is not much, then you can safely fix the product. Otherwise, if you install a decorative corner on a highly twisted wall, then a slot is formed due to a significant difference in the size of the angle.

Installation of decorative corners does not require special knowledge, it is capable of performing even a novice that does not have sufficient knowledge. Since the attachment of this product follows only after the final processing of the walls, the process is much easier.

Installation Instructions

To mount the self-adhesive corners, the same sequence of actions is applicable, with the exception of paragraph No. 1 (applying glue to the surface of the corner).

Instead of plastic decorative corners, MDF products coated with plastic film can be used, as well as noted earlier, it is possible to decorate decorative stone. All these materials can also protect the angles of walls from wiping and damage. Photos of corners, in the design of which these materials are used, can be found on Internet resources.

Decorative corners of MDF due to a wide selection of colors are capable of becoming a great decoration for any room. To mount them to the walls, you can also use special adhesives, sealants or liquid nails (on the packaging of the selected MDF tool must be in the list of materials with which the adhesive interacts). Like any other decorative corners, such products can be used not only for decoration of walls, window and door spans, but also serve decoration and protection for other interior items.

During the construction of the house, an important role is to finish the outer walls. It not only provides external attractiveness, but also protects the house from the influence of bad weather and ambientThus, significantly increasing the service life. In this article we will look at the options for the outer decoration of walls and corners of the house, as well as we will analyze the variant of the decorative facing of the corners of the building outside.

general information

Before proceeding for the processing of the outer walls of the house, you will need to pre-install windows and doors, if the building was only built. If you plan to finish wooden house Outside, it is necessary that he will give shrinkage. Also consider that wall cladding should be carried out after a complete drying of the tree.

You can work almost at any time of the year, so there should be no complications with this. The choice of coating is often depends on the material from which the building was built. Sometimes there is quite simple plaster or painting, and in other cases an additional insulation of walls will be required.

Also consider that some types of finishes can significantly increase the pressure on the foundation, so before using a stone or brick, make sure that the base is strength.

Types of outdoor wall cladding

Nowadays there is enough a large number of Surface processing methods. Most often for exterior walls are applied as follows:

• wall cladding with natural stone;
• brick coating;
• artificial stone;
• testing using siding or lining;
• application on the wall of plaster.

Let's analyze each option in more detail.

A natural stone

The use of stone for exterior walls will give the house strict appearance. Such treatment of outdoor walls demonstrates the success and wealth of home. To the advantage of cladding the stone can be attributed:

• the strength of the processed facade;
• high service life;
• attractive appearance.

Also consider that thanks to its properties, the stone will perfectly cope with the protection of the surface from the exposure of moisture outside. The stone can be used for both full finishes and for partial, for example, for the base or corners of the building. You can choose two types of building stone: processed or untreated. The last option looks attractive, however, work with it is a little more difficult.

Quite often, granite is used for outer walls, this option also has a decorative effect. A marble is also used, which has greater shades variation. The price is really quite high, so not everyone can afford this luxury.

Another disadvantage is the high weight of natural building materials. However, there is a stone called travertine, it weighs much less, while possesses good effects of sound and thermal insulation. The method of finishing with the help of travertine is greatly simplified, and the price does not bite so much.

Consider that the wall decoration outside the stone in any case is quite expensive and heavy lesson that will require from working special skills and knowledge. Therefore, we recommend paying careful attention to other facing methods.

Fake diamond

Selection of artificial material - a good option For processing outdoor walls. It will not even require any preliminary training. This stone has almost the same indicators as a real material.

This method of finishing makes it possible to give a building a pleasant appearance and it will be necessary only. minimum costs. Consider that the texture of such a stone can be both smooth and embossed, so the choice is yours. There is also a fairly large variation of shades, which will allow the house to provide a unique design.

Siding

Siding in our time gained quite high popularity, due to good performance indicators and quality. This coating is mounted on a mustache - this must be taken into account by performing the wall finish. In general, this material is made of vinyl, but there are options from a metal or even foam. Such treatment of outer walls and angles has the following advantages:

Siding installation must be performed on the frame of the house. Quite often, when installed, the insulation is used. The only disadvantage of such a finish option can be considered a bad combination of siding with other decor options. Consider that the installation should be extremely accurate to prevent damage to the material.

Finishing clap

The lining is made from natural environmental components, so no harm will cause a person. It is made in the form of a treated wooden board. The lining will provide a house with an attractive appearance, moreover, visually lines the outer wall and will provide good noise insulation.

However, such a finish for outer walls and angles has almost all flaws of wood, therefore additional treatment with special solutions will be required. The lining is most often made of the following wood species: oak, pine, spruce, birch, nut and linden.

Using bricks

Brick will provide good defense Outdoor walls and corners of the house from environmental influence. This processing method can be considered one of the most durable options. In addition, the brick will provide exquisite appearance and will not require special care. Mounting method is also quite simple.

Due to the ability to vary the dimensions and shape of the brick, you can create unusual design. The use of buried brick will also make it possible to achieve impressive results. The main minuses of such a finish can be considered a lot of weight and a high price of material.

Facing plaster

The plaster is mainly used when it is necessary to create a decorative effect of the outer wall and ensure protection against fire. Decorative solutions are of different types, silicate mixtures are particularly popular.

Also quite often use acrylic solutions that have improved characteristics. Decorative plaster for exterior walls and angles is presented in many versions, so the choice will be not simple.

This finish will protect the building from moisture and fire. Significant minuses can be considered a low life, which will not exceed ten years, as well as the need for additional leveling of the wall, and, especially angles, which will require time and strength.

Combined finish

There are two ways to combine:

The last combination method began to be used noticeably more often. These ways will allow interesting interior Buildings and endow it with the properties of each of the types of facing.

Finishing of outdoor corners of the house

Corner treatment is often performed from the same materials as the wall. In addition, the case when you want to create a decorative effect. For trim, the corners are used: brick, stone, plaster, foam, tile and other materials. Remember that work with corners is quite hard work and sometimes without the help of professionals it is difficult to do.

To finish the outer corners of the building recently, special panels made of foam, which ensure the creation of an unusual decorative effect. The same treatment is suitable for wooden houses. With such a facing, the building acquires the effect of antiquity and becomes like a castle. We recommend viewing the next video to see the processing of angles using foam in practice:

Summing up

As you can see, the outer decoration of the walls of the house is extremely important occupation, which provides a decorative effect and allows you to achieve additional protection. There are quite a lot of options, and choose one of them will be quite difficult. Each of them has its advantages and disadvantages that were considered in detail in the article. If you wish, you can choose the combination option, but it is necessary to take into account that it will be difficult to finish quite difficult, as special skills and knowledge will be required. The choice of a method of facing the exterior walls will depend only on you and your personal tastes and preferences. We recommend viewing a special video to learn more about the methods of finishing the outer walls of the house and their corners.

A large number of building materials on the modern market allows the interior of a house or apartment in a variety of decor options. This applies to walls, ceilings, doorways, window slopes, etc. But to give lines a finished look and protect them from deformation, protective plastic corners that are easily mounted, have durability, practicality and acceptable price.

Show all

Plastic profiles to protect external angles of walls

Perforated metal or plastic corners are used at the stage of plaster and alignment of walls and ceilings using drywall. Profile options are installed to strengthen the finishing layer of putty and giving the joints and lines in two planes of the perfect geometric shape. With these materials, it is easy to level at least visually external and internal angles Even on the most uneven surfaces.

This material for finishing the external corners of the wall has a number of advantages, among which experts allocate such as:

• Reliable protection. As begress, you neither treat the decorative finish in our apartment, without using these plastic parts after a few months at the joints of the walls, scratches, scratches, chips and other traces appear. Especially if there are pets indoors.
• Elimination of gaps and gaps. The plastic corner copes perfectly with the task of solving the problem on any curvilinear surfaces between the wall panels.
• Improving appearance. A variety of options and colors allows you to transform the decor of the room and give it a finished and beautiful form.



But not only on the outside are plastic corners, they are also used to protect the internal junctions to hide the visible transition from different species Finishes, such as plasterboard or MDF panels with wallpaper and wall plates.

Plastic Corner - Production Features and Applications

With the sealing of angular joints and irregularities on the walls and ceilings, profiles made of silicone, polystyrene, polyurethane or polychloroquinyl are used. The last PVC option remains the most popular and demanded due to its versatility and practicality. Such types do not apply only as "naschelniks". When it is necessary to close the outer line of the window opening, it is better to fit metal analogs or MDF panels.



Otherwise the popularity of the PVC corner is due to good flexibility, durability, ease when installing and grabbing material with various species glue. Another plus is a democratic price, which is why the finishing corner is used if the decor of the premises of the large area is used.



In the form, on which the specific scope depends, the following options for plastic corners are distinguished:

• L-shaped and T-shaped. Used for sealing joints, cracks, seams and creating a smooth edge and angle between plates or panels different in its type.
• Standard (P-profile). Designed for decorating window slopes, arches, interior openings, etc.
• F-shaped. Apply as a material when arranging slopes to close the PVC panels and walls connecting places.

Corners are released in several sizes and virtually any color, under the tree, natural stone, etc., depending on the specific conditions and tasks for finishing. To install on the transitions between wallpaper and decorative plaster Enough itself small corner 10x10 mm. For others internal work Use materials with dimensions 20x20 or 25x25, which are considered universal. Large types (50x50 mm) are used mainly to finish the external arches and the facade of the building.

Finishing of slopes and bathroom

One of the applications of the PVC corner in repair and construction is the sealing of slopes of doors and windows. This material is ideal for closing external corners. The traditional technique of making slopes involves the use of drywall and plaster with a mandatory increase in a special metal profile with perforation.



It allows you to create perfectly smooth surfaces and geometrically equally plane, but after the final finish, the open edge remains unprotected and a plastic corner comes to the rescue.

They close the ends of the facing panels and other external joints, as well as the cross-side and wall intersection lines. Sizes are chosen based on the width and height of the window opening.

Indispension such a corner and when finishing a bathroom with laid out on the walls tile. M-shaped profile closes the seam between the bathroom and the wall. At the expense of its property, the polychlorvinyl is ideal for a wet atmosphere and warns against the appearance of a fungus on the joints and the water strait.



Corners use and to close the slots and joints on input and interior doorway, Especially when used in the finish of lining, PVC or MDF panels.

Using the "arched" corners in the decoration of the room

The arched version of the doorway is becoming increasingly popular, as it gives the room a solid look and frees the real and visual space. Domestic arches most often make metal carcass With plasterboard or from wall foam blocks with a special calculation.



The decorative plastic profile in this case is closed joints and angular transitions from slopes to plasterboard. For this corner, it is necessary to bend correctly so that it does not crack and did not break. Therefore, with the improvement of arched corners, special plastic profile Or cut the usual for small segments of 25-30 cm.



For the archer, the corner of the inequalization version of 17x5 mm is ideal. It bends without disturbing and goes well on adhesive base, not peeling from the edge of the wall. With a small radius of arc use "hot" catching profile. For this, as it is installed, it is heated by a construction hairdryer to a temperature of 60-70 degrees and roll to the wall with a soft painting roller.

The process itself works on the installation of plastic corners is easy. The course of work is no different from the plinth stickers or polyurethane strokes. The main thing is to properly prepare the material and handle it as carefully as possible in order not to scratch and not damage.

When calculating slopes, first measure the profile length for each suggestive corner. Most often, they have a rectangular shape, which means all the joints are made at right angles and cut the joint line under 45 degrees. For the arches or multifaceted archs, the angle was stored on the place.

After the measurements are proceeded to proper cutting. To do this, use a sharp knife or well-sharpened scissors. If there are no such tools, then we use a conventional hacksaw for metal and a ruler for an even cut. All burrs and irregularities are treated with fine-grained emery paper. Next perform a preliminary measurement. Billets are installed on the place of gluing and align in the construction level and pre-fix with painting tape in several places.



After that, it becomes clear how correctly the corner cut of the product at the place of docking two profiles was carried out. Sometimes it happens that a gap appears on the junction line (1-3 mm), especially those who work with this material for the first time. To avoid this, allow the allowance of 2-3 millimeters to the initial measurements, and the excess is erased with all the same sandbags.

The process of sizing and the choice of a suitable material

Before you begin to the final stage of installation of a plastic corner, you need to choose the right glue. In construction stores offer compounds called "liquid nails", they also use some masters. But this cannot be called universal, it is suitable only when fixing thin and small profiles on a flat surface of the wall.

To close the slopes or cracks between the tile and the bathroom, in the complex arches and the transitions from one material to another it is better to use liquid silicone. It is classic, transparent or color, mostly white. Silicone does not sit down, does not drain in contrast to liquid nails and ordinary glue, which have a property with time to rock and crumble.



This is especially true for places with a high level of vibration, in doorways, window slopes. In the bathroom, silicone will not only secure the corner reliably, but will serve as an additional gasket from water and the formation of fungus due to constant humidity.

Technology stickers are simple. Silicone is applied to the inner surface of the profile along the entire length. If the glue and the corresponding formulations are used, they are squeezed out of the tube point, at a distance of 10-15 cm from each other. It is not necessary to cover the whole corner with glue, it will be impossible to smoothly press, and the remnants of the glue blocked the surrounding finish, to bring them later problematic.

The corner is installed on the place of the gluing and gently pressed, and then exhibit the most accurately at the construction level and the ruler. Additionally fix with several pieces of scotch or tape so that it does not change its position. The extruded glue residues are removed by a wet cloth or a paper napkin, when working with silicone, the excess is removed after grappling and drying by the stationery knife.



When docking the horizontal and vertical profile, the first plank is first set, over it top. It is also sampled, but you will definitely apply a small amount of adhesive on the kennels of the joint and then give placams to completely grab, usually takes 15-20 minutes.

The plastic corner is used not only when decorating the indoor room, but also in the outdoor option, at the cottages, bath, wooden house From a bar with clap, on panel facades, etc. The material gives the structure of completeness and additionally protects the tree from excessive moisture and other climatic influences. Acceptable price, durability and a variety of forms and colors make plastic corner an indispensable and reliable detail of the interior.

The rational organization of space implies the thoughtful functionality and the decor of the corners in the apartment. But in any house there are not only internal and outer angles that need to be properly protected from mechanical exposure and destruction. In a small apartment layout, it is important to consider the arrangement of all corners so that each square meter is endowed with useful functionality.

Great idea to save place

Here is a collage of paintings from paintings in the apartment

Decorate the corners in the apartment is best flexible stone

Many it seems that several centimeters on both sides of the angle are completely useless space, but it is not. It all depends on how they are used, the functionality of the useful area - and the arrangements of the corners in the apartment are performed.

Personal space is what catastrophically lacks in a close apartment with numerous households. Sometimes there is no place to retire to distract from obsessive thoughts to listen to good music in headphones after work. For this, it is not so much - a comfortable chair in the corner, which can be separated by a movable screen or a curtain, but it is not necessary. There are options, what will be convenient to sit:

• bag chair;
• advertiser;
• folding couch;
• computer chair;
• soft stool with armrests;
• classic or folding chair bed;
• the chaise lounge or spinous (in the summer they are taken to the country).

A cozy place in the corner is suitable for communication in social networks (for a laptop or at the tablet), it is desirable to have a lighting device. There may be a city telephone here, but also to communicate on a mobile one will want to come to this chair, having heard the call call. Such a corner can be equipped in any room, even in the corridor, but be sure to think about the lighting.

For the decoration of the corners, flexible stone is perfect

Wall decoration flexible stone will look great in the interior

It is very convenient when there is a small coffee table in such a personal space or another horizontal small plane:

• wall regiment;
• console;
• floor lamp with shelf;
• folding countertop.

On a small shelf you can place many necessary things, including tea with a sandwich and charger, if there is a socket in the corner or carrying. Such a corner for solitude can be occupied in turn, but it can be someone's real space. Even if the furniture goes beyond the angle, the method of application will not change.

Working corner - also important functionality, especially when you have to zonail one-room apartment. Equipment and furnishings of the working mini-cabinet varies by intended purpose:

• computer desk;
• writing desk for a schoolboy;
• corner for sewing equipment and cutting;
• place for musical training;
• sports simulators and shells;
• corner artist with easel.

Using compact furniture, you can store everything you need in one place for work, study, development and self-education classes. Conveniently when the ceiling is placed corner regiment, rack or built-in furniture. It is also important to think about how to decorate the working corner of the room - color cases for documents, glass shelves, live flowers, photos within and pr.

In the corner of the room you can make a fountain, it will look gorgeous

It is best to decorate the angles of flexible stone

Such vases will be excellent solution For the decoration of the corners

A collection rack of a small format is useful to those who have nowhere to give their "treasures". Hand-Maid's real masterpieces on the cabinets makes no sense, it is better to put them on the shelves and shop windows.

A narrow corner rack - just the case when without furniture can not do. It is desirable that he does not go beyond his place, then the decor of the angle of the wall is not needed, their exhibits will be replaced. If the furniture is not planned, your needlework can be set as part on the walls of the corner.

The mini-library in the corner is excellent use for a small empty space. If someone seems to be in the age of computer technology, the book went into oblivion, is mistaken. In many homes, books are still appreciated, read and carefully stored on the shelves. They need shelves, racks or stands, optionally corner form, depending on how to decorate the corners of the walls in the apartment with a mini-library.

Fireplace corner, while there can be located real fireplace, Modern upgraded focus or false fireplace. This is a self-sufficient element of the interior, it does not need additions, but over a decorative fireplace, you can place a clock or an original souvenir.

Live corner is another reasonable application for unoccupied space furniture. There may be an aquarium on a tamba or a whole feeder "RUBBER", if in the family they are engaged in the sake of additional income. You can also place a cage with parrots, chinchilla, protein or another rodent. Lenhing for cat or dog - Lower "floor" of a homemade mini-star.

The most common way to take free angular space is well lit room - put big plant, room exot or stand with flowers. If the angle is spacious, the shelf will enter flower pots or vertical landscaping unit.

In the vase you can put the branches of trees

Solving how to reorganize the corner in the room, you should not hurry with the purchase of furniture. Pay attention to the samples that today are quite a few catalogs, in furniture drains and malls supermarkets. For a small space fit:

• compact models;
• corner products.

In the corner of the room you can put alive flowers, it will look very beautiful

In the angle you can put the chest

You can hang pictures on the wall

Before buying it is important to measure the area of \u200b\u200bthe angle so that the furniture fully fit into it. Its functionality I. specifications must fit the room.

In the angle you can put a vase with dry branches

Flexible stone is perfect for decorating the corners

Decorative stone Great for wall decoration

With the lack of " square meters»Corners should not be empty. They are composed of functionality, and the decor of the corners and walls in the 1-room apartment or the living room is obeying general design. Consider that even compact sofas are:

• straight and angular (under the right and left corner);
• with transformation and without layout;
• sliding forward and sideways;
• modular (from individual blocks) and island (located in the center of the room).

In a small corner, they can be put not only on the wall to the wall, but to have diagonally. Folding models must stand so that there is a place under the starting position and in the unfolded form, plus a place to pass.

The rest of the space can occupy any compact furniture. The best corner version of the computer table is combined with a rack to the ceiling, a mass of the necessary little things will be placed on its shelves.

In the angle you can put a vase with flowers

There are special angular paintings, they look unusual

Kitchen and dining area.

Before drawing an angle in the kitchen, see what you can take the maximum. See, whether a fridge will come there, a narrow penalty or a small section of a kitchen headset. They can be placed on each other - until the ceiling.

If in the corner gas column, extractor or counter, such an angle can be decorated with doors hinged cabinet, imitating a full kitchen module. The only difference - the box will not have the bottom and top. You can transform a ready-made sample.

Room corner finishing can be made of decorative stones.

Trim corners flexible stone will be a great idea

In the corner of the room you can put a shelf with flowers

For such a case, most convenient corner models kitchen cabinets. They are more specific, from the door do not interfere with neighboring modules. If there is a small compact table with chairs in the corner of the dining area, it is worth considering the decoration of corners in a small apartment - for a pleasant learning.

Experts argue that the appetite causes yellow, orange and red decor, as well as some shades of green. The subconsciousness passively perceives brown, purple, black and blue food, as well as fed dishes on metal dishes.

Ways to decorate the corners and walls in the bedroom depend on the main furniture - the bed and a wardrobe (wardrobe, dressing room). A small space in the corner of the bed must be equipped with a comfortable plane:

• chest of drawers;
• bedside table;
• bedside table;
• console under the mirror;
• small dressing table;
• locker with a shelf;
• truma.

The angle of the room can be transformed into the workplace

Flexible Stone Wall Decoration Suitable for Decor

The traditional bedroom decor is flowers, paintings, panels, mirrors (on the wall or on a stand). It is important that all objects are harmonized, creating a comfort and a special intimate atmosphere. Appropriate exhibition of paintings in the style of "Nu".

On how else to decorate the corner in the room, see examples in our photo gallery.

Video: Corner decor flexible stone

External angles of walls are most vulnerable to damage, especially if there are small children or animals. After all, plaster mixes are not durable and slightly touching the corner with a small object for damage. As a result, if the angle is assessed by wallpaper, they are formed dents, and if painted is painted, then notched. Therefore, it is necessary when repairing an apartment to strengthen the external angles with special corners.

Corners are plastic from PVC (on the photo on the left) and metal. Metal corners are installed during the repair of walls in front of them alignment and putty and at the end of the repair are not visible. Plastic corners are installed after the walls of the walls with wallpaper or painting. Plastic can be different colors and you can pick up a corner of the color of wallpaper or wall flattening. Plastic corners can be installed at any time, for example, if the outer angle lost the appearance as a result of damage or blocked mud.

Using a metal corner profile

The protection of external angles with a metal corner profile is preferable, since after the end of the repair of the area of \u200b\u200bthe corner profile is not visible and, most importantly, the problem of aligning the angles and the walls of the walls is solved.

The length of the standard corner profile is three meters, so before installing it, you need a tape measure to measure the length of the angle and cut the excess part of the profile.

Since the corner profile is made of thin steel, it is well cut by metal scissors. The sides of the corner cut to towards each other, and not the cutting portion is easily reheated by several beggars.

If the angles of the walls are direct (if the walls are lined with plasterboard plates), then the easiest way to fix the profile corner with small carnations, as shown in the photo. If in the angle it is not possible to score cloves or it is uneven, then it is necessary at a distance of no more than 50 cm from each other to apply a small amount of plaster, alabastra or rothband, and until the solution froze, apply the profile corner to the leveling corner.

To reliably fix the profile corner on the wall in the case of the presence of a gap between its sides and the wall, it is necessary to fill these gaps with a spatula before alignment or spacure walls.

Such a measure will prevent the bending of the corner when aligning the walls and will ensure reliable fixing the corner as a lighthouse.

After the solution, which fixes the profile corner, will freeze can be started to finish the adjacent walls. In the photo you see how the corner is hidden by the Rotband in the walls departing from it.

The use of the profile will make it possible not only to securely protect the angles from destruction, but also to make almost perfectly smooth external angles. All six external corners in the hallway, when repairing it, I protected and leveled with a corner profile.

With the help of plastic corners

PVC plastic corners are used to protect or decorative finish painted floating wallpaper or finished decorative coating external catch of walls. But these are not limited to them. With success, PVC corners can be used for decorative finishing of window and door slopes, designing of panels and in many other cases. Corners are made of different colors and even produced transparent. There are from 10 mm wide up to 100 mm, 1.5, 2.3 and 3.0 meters long. There are also corners in the form of an arc, specially intended for installation on corners in the arches.

Plastic corners are fixed usually using liquid nails, but there are corners with an adhesive layer applied with an adhesive layer protected by anti-adhesive paper.

It should be noted that plastic corners can be glued only for quite even angles, otherwise the slots formed between the side of the corner and the wall can only worsen the appearance. Therefore, before making the decision to protect the angle of the angle by a plastic corner, it is necessary to determine whether the cracks will not appear. To do this, applied to the corner a long construction line or a flat board. A corner of PVC is rather elastic and if the nonlinearity of the corner of the walls is smooth, the gap will not appear.

PVC plastic corner I applied to decorative design and protection against the destruction of angles formed by the wall and slopes entrance door. Corner was chosen 10 mm width white colorsince the slopes were painted white water-emulsion paintAnd the walls had coffee with milk. That of it turned out to be seen in the photo.

Since the angle formed by the slope and the wall was not straight, then use the line for the Marking of PVC Corner was difficult. Therefore, the markup was performed by applying the corner to the place of the future installation and the point of the point saw the marker.

The thickness of the plastic corner is only 1 mm, so by pressing it to the corner of the table for repair, the corner is easy to cut the jigsaw. Side of the metal is suitable. In order for the end to be smooth, it is necessary after its sawing to walk on it fine-grained emery paper fixed on a wooden bar.

To secure the corner, it is best to use liquid nails. When buying liquid nails, you need to make sure that they are intended, among other things, for the attachment of PVC materials. If liquid nails are high-quality, then it is almost impossible to exhaust them from the corner after drying. I used liquid nails whose packaging you see in the photo.

For reliable consolidation, it suffices to apply small portions of liquid nails at a distance of 15-20 cm along the entire length of the corner, as in the photo. Next, the corner is applied to the planned location, pressed and is held over the time specified in the instructions on a particular brand of liquid nails. Typically, the clutch time is several minutes, and for complete drying, a day will be required.

Next places a horizontal corner, cut into size and applied to fitting. If there is a wedge-shaped gap between the corners, then with the help of sandpaper, fixed on a wooden bar, hangs the end to the desired size. It is better to make a horizontal corner with a millimeter longer than it turned out at fitting. In this case, if it was mistaken, it will remain the possibility of fitting.

With the fitting of the vertical corners of the door slopes, since their lower end is always closed by floor plinth. Therefore, it is always possible to accurately fit the contiguous ends of the corners.

If high strength is not required, then the external angles of walls can be protected using decorative corners of MDF coated with decorative plastic film. With the help of such a material now do the doors and facade of the kitchen. Corners are easily processed, allow you to protect the outer angles from 90 ° to 180 °. The range of corners of the MDF is represented by a large selection of colors and drawings, which allows you to choose them under the color of wallpaper or the walls of the walls. Outer angles protected by this corner have a beautiful appearance. You can fix them in the corners by any liquid nails. I used this type of corner for the decorative framing of a large mirror, fixed directly on the wall.