External angles of walls are most vulnerable to damage, especially if there are small children or animals. After all, plaster mixes are not durable and slightly touching the corner with a small object for damage. As a result, if the angle is assessed by wallpaper, they are formed dents, and if painted is painted, then notched. Therefore, it is necessary when repairing an apartment to strengthen the external angles with special corners.

Corners are plastic from PVC (on the photo on the left) and metal. Metal corners are installed during the repair of walls in front of them alignment and putty and at the end of the repair are not visible. Plastic corners are installed after the walls of the walls with wallpaper or painting. Plastic can be different colors and you can pick up a corner of the color of wallpaper or wall flattening. Plastic corners can be installed at any time, for example, if the external angle has lost appearance As a result of damage or blocked mud.

Using a metal corner profile

The protection of external angles with a metal corner profile is preferable, since after the end of the repair of the area of \u200b\u200bthe corner profile is not visible and, most importantly, the problem of aligning the angles and the walls of the walls is solved.

The length of the standard corner profile is three meters, so before installing it, you need a tape measure to measure the length of the angle and cut the excess part of the profile.

Since the corner profile is made of thin steel, it is well cut by metal scissors. The sides of the corner cut to towards each other, and not the cutting portion is easily reheated by several beggars.

If the angles of the walls are direct (if the walls are lined with plasterboard plates), then the easiest way to fix the profile corner with small carnations, as shown in the photo. If in the angle it is not possible to score cloves or it is uneven, then it is necessary at a distance of no more than 50 cm from each other to apply a small amount of plaster, alabastra or rothband, and until the solution froze, apply the profile corner to the leveling corner.

To reliably fix the profile corner on the wall in the case of the presence of a gap between its sides and the wall, it is necessary to fill these gaps with a spatula before alignment or spacure walls.

Such a measure will prevent the bending of the corner when aligning the walls and will ensure reliable fixing the corner as a lighthouse.

After the solution, which fixes the profile corner, will freeze can be started to finish the adjacent walls. In the photo you see how the corner is hidden by the Rotband in the walls departing from it.

The use of the profile will make it possible not only to securely protect the angles from destruction, but also to make almost perfectly smooth external angles. All six external corners in the hallway, when repairing it, I protected and leveled with a corner profile.

With the help of plastic corners

PVC plastic corners are used to protect or decorative finishing of painted flooded wallpaper or finished decorative coating external catch of walls. But these are not limited to them. With success, the PVC corners can be used for decorative window finishes and door slopes, layouts of panels and in many other cases. Corners are made of different colors and even produced transparent. There are from 10 mm wide up to 100 mm, 1.5, 2.3 and 3.0 meters long. There are also corners in the form of an arc, specially intended for installation on corners in the arches.

Plastic corners are fixed usually using liquid nails, but there are corners with an adhesive layer applied with an adhesive layer protected by anti-adhesive paper.

It should be noted that plastic corners can be glued only on enough smooth anglesOtherwise, the slots formed between the side of the corner and the wall can only worsen the appearance. Therefore, before making the decision to protect the angle of the angle by a plastic corner, it is necessary to determine whether the cracks will not appear. To do this, applied to the corner a long construction line or a flat board. A corner of PVC is rather elastic and if the nonlinearity of the corner of the walls is smooth, the gap will not appear.

PVC plastic corner I applied to decorative decoration and protection against the destruction of the angles formed by the wall and slopes entrance door. Corner was chosen 10 mm width white colorSince the slopes were painted with white water-making paint, and the walls had a color of coffee with milk. That of it turned out to be seen in the photo.

Since the angle formed by the slope and the wall was not straight, then use the line for the Marking of PVC Corner was difficult. Therefore, the markup was performed by applying the corner to the place of the future installation and the point of the point saw the marker.

The thickness of the plastic corner is only 1 mm, so by pressing it to the corner of the table for repair, the corner is easy to cut the jigsaw. Side of the metal is suitable. In order for the end to be smooth, it is necessary after its sawing to walk on it fine-grained emery paper fixed on a wooden bar.

To secure the corner, it is best to use liquid nails. When buying liquid nails, you need to make sure that they are intended, among other things, for the attachment of PVC materials. If liquid nails are high-quality, then it is almost impossible to exhaust them from the corner after drying. I used liquid nails whose packaging you see in the photo.

For reliable consolidation, it suffices to apply small portions of liquid nails at a distance of 15-20 cm along the entire length of the corner, as in the photo. Next, the corner is applied to the planned location, pressed and is held over the time specified in the instructions on a particular brand of liquid nails. Typically, the clutch time is several minutes, and for complete drying, a day will be required.

Next places a horizontal corner, cut into size and applied to fitting. If there is a wedge-shaped gap between the corners, then with the help of sandpaper, fixed on a wooden bar, hangs the end to the desired size. It is better to make a horizontal corner with a millimeter longer than it turned out at fitting. In this case, if it was mistaken, it will remain the possibility of fitting.

With the fitting of the vertical corners of the door slopes, since their lower end is always closed by floor plinth. Therefore, it is always possible to accurately fit the contiguous ends of the corners.

If high strength is not required, then the external angles of walls can be protected using decorative corners of MDF coated with decorative plastic film. With the help of such a material now do the doors and facade of the kitchen. Corners are easily processed, allow you to protect the outer angles from 90 ° to 180 °. The range of corners of the MDF is represented by a large selection of colors and drawings, which allows you to choose them under the color of wallpaper or the walls of the walls. Outer angles protected by this corner have a beautiful appearance. You can fix them in the corners by any liquid nails. I used this type of corner for the decorative framing of a large mirror, fixed directly on the wall.

Wallpaper and covered outer angles need protection. Wallpaper from frequent contact rubbing, putty collapses. It is possible to solve the problem with decorative corners. Corners to protect the angles of walls can be from different materials.

Corners to protect the angles of walls: selection options

This technique of decoration of the angles of walls - protective corners - not all, but there are no special alternatives. In any case, on the walls of the walls of the wallpaper, the corner is still better than protruding and torn canvases.

Only one solution integrity solution is available without using decorative corners - do not make a sharp sense angle, but rounded. In this case, there will be no problem with its finish. You can simply wrap the wallpaper canvas without cutting it. But it is necessary to bring an angle ideally, otherwise it will have to cut again, and, it means that the question of protecting the interface on the corner will again rise.

It is important to choose the decorative corner correctly so that it does not look alien. There are special techniques for this.

Pick up the corners to protect the angles of the walls must be based on the total design of the room. There are several standard solutions:

In general, select the corners to protect the corners of the walls must be tied to the room design. You can do this after furniture will be placed and textiles will be placed. In this case, it is easier to present the end result. Because the picture in our head can be very different from reality.

If you do not manage to choose an acceptable color, and the corners in the apartment should be protected, pay attention to transparent plastic corners. They are different species - Hard, flexible, with different wall thickness.

Types of protective corners: from which materials

In terms of application, corners are for external (on the street) and internal use. So far we will talk about how to protect the corners in the apartment and the house - in the premises. Let's start with the materials. Corners to protect the angles of walls can be:

The most running is plastic corners to protect the angles of walls. Do not think that such a defense of slaughter looks. In any case, it is no worse than the wipe corners. Simply plastic is the type of different - polished, with a metallized effect, with a satin (matte) surface, with various relief. It is clear that in order to find something defined or special, you will have to run around construction stores and markets. But the types of registration is a lot. If the corners to protect the angles of the walls are chosen correctly, they organically fit into the design, absolutely not attracting attention. At the same time protect and decorate the joints very reliably.

Forms and sizes

Finished corners are usually an angle of 90 °. The angle itself is not always sharp, there are options with rounded. By type, the corners to protect the angles of walls are divided into:

• hard
  • external;
  • internal;
• flexible (plastic, rubber)
• universal.

Questions can only be universal. These are two plastic lanes or MDF connected by a thin strip of flexible material of the same color. Thanks to this connection, you can make a stupid or acute angle, internal or external - without a special difference. But according to the reliability of protection, it is inferior to hard - all the same flexible part is quite thin.

It is also worth knowing that the corners can be with the shelves of the same and different widths. More often meet with the same, but it is quite possible to find such that one is wider, the other is already.

The width of the shelf from different manufacturers is different. Plastic, for example, can have a shelves from 10 mm to 50 mm. MDF corners are minimally made with a width of a shelf 20 mm, metallic - from 10 mm, but the maximum long shelf is 90 mm (aluminum). So choose from what.

What to bump

The choice of the method of attaching the corners to protect the angles of the walls depends on the material of the corner, on which surface they will be attached to. Most often apply glue. And in the leaders "Liquid nails". This is a universal composition, but before buying, check that the specific brand can glue the materials you need.

You can plant the corner for glue, if it is smooth, without big flaws. If there are pits / hollows, you can hardly stick it. In this case, you can use silicone. If glue white corners, silicone can take white. Under the colored it is better to take transparent. Not everywhere it is advisable to use acidic. Although it is cheaper, but can damage metals or paint.

In both cases, the wall and corner must be clean, dry. The composition is applied to the corner, it is pressed against the corner, fixed by strips of painting scotch. We grab in 40-60 cm. If everything is exactly, it is possible and after 60 cm, if you need to repeat the form, after 40 cm or even more often.

Leave in this state until the glue dry or does not harden silicone. Look at the packaging. Then the painting tape can be removed. It differs from the usual tape by even paper wallpaper Split without surface damage. But to be confident, try to glue and open in an invisible place.

Corner of foamed rubber - M-shaped and universal on self-adhesive basis

There is one more option of how to glue corners on the wall with wallpaper, painting. You can use bilateral scotch. It is first to glue to the corner, then removing the protective coating, press the corner. There are corners to which Scotch is already glued. Some types of foam rubber or plastic (usually flexible or universal).

Arch decoration

Arch design often becomes a problem. In general, there are not so many outer corners in the apartment, but they have sure arc. And in the passage they are very often referred. That furniture, then another cargo or simply not fitted in the opening. And there is no question with a direct part of the questions, then the rounded part may be a problem.

In general, universal corners can be used for the arch. They are flexible, which is very convenient. There are flexible non-universal - plastic, from a special polymer of increased elasticity.

But in general, the arches applied multiple width Shelves. They are even called arched. They have one shelf 10 mm (outer) second - internal - 30 mm and more. They are easily rushed. In the bubble do not twist, but any curvature of the arc is easy to get. It will only be necessary to use reliable fixation during the drying time of the glue.

If you do not want to be a regular corner, it can be done heating plastic. For this work, you need a construction hairdryer. Normal - for hair - not suitable, as it is too low. You still need a template for which we will bend plastic corner. Take a piece of fiberboard, tighten the screw or leaving nails, forming the profile that you need.

So you can arise the corners of the arch protective corners

Begot start from the middle. Heat the site, constantly pressing on the middle, and a hairdryer moving from the center to the edges. So you need to bring the corner to the desired curvature and leave in such a position. So that it does not straighten up, in parallel with the number of self-tapping soles make holes under the second row. The distance between the rows is equal to the width of the shelf corner. After plastic bent, we insert and slightly tighten the screws. After cooling the plastic, they remove them.

How to cut finishing corners

Almost always corners to protect the corners of the walls have to cut. They are sold straightfights from 2 to 3 meters long. The cutting tool is selected depending on the type of material. For wood and metal, thick plastic needed a hacksaw, that's just a canvas different - on wood, and with a fine tooth for metal or thick-walled plastic.

Slim plastic can be cut with a construction or stationery knife, sharp scissors. If you need to cut perpendicularly, it is easier to use scissors. They are dotted to the angle on both sides, bend the corner, the remaining millimeters do the stationery knife. If there are flaws, they can be easily corrected with the same knife or sandpaper with very small grain (polishing).

If the plastic corner should be cut along the fold, cut it along the inner corner with the help of a stationery knife. Slowing to the whole thickness does not make sense. It is necessary only to leave a noticeable lane. Then we flex a piece that you want to delete. It breaks away at the place of cut. Orthodics we clean the knife or sandpaper.

When you make repair with your own hands, if you are not a professional in this matter, there are many questions that require immediate and proper decision. It applies to finishing the corners in the apartment. Corners are external and internal, rectangular and not very. And now there was a problem, how to put them in order, that is, it is possible to correct and decorate. Internal angles are often not very noticeable by their curvature, because they are hidden under wallpaper or under decorative plaster and are forced furniture. Other business corners external. They usually always in sight. But let's try to figure out and find ways to solve this problem: while repairs to correct the curvature of the corners allowed during construction and somehow transform the corners.

So, internal anglesthe walls can be aligned with several ways and here are the two most common:

• by plastering the angle and adjacent wall
• correction of angle with plasterboard

Plaster Any surfaces, as you know, the process is quite time consuming, dirty and long. If you decide to go exactly this way, calculate all the pros and cons. You need to look at, much is the corner of the distance from perfection (90 degrees). If the error is too big, then there is a lot of work, because together with the angle there will have to stucked most of the wall. And more than 2 cm, the plaster cannot be applied, otherwise the thick layer crackles. And you will have to do this work several times, imposing a layer behind the layer. You need to estimate, so you need this ideal angle, and maybe you can leave everything as it is, limiting it with decorative trim. If you still decide to stucked, use a metal corner, which is called the countercultuary. The angle is pre-ground and countercultants are glued onto the shtclotch, slightly pressing it into another soft plaque mixture. This corner will provide the desired straight angle. The countercultuary is equipped with both sides along the edges of the reinforced grid, which will go under the plaster and thereby make an angle strong and smooth.

With help gypsum Carton You can align a variety of irregularities on any surfaces. If the curvature of the angle is small (up to 2 centimeters), then a frameless way of mounting sheets of plasterboard sheets is used. If more than 2 cm, then the framework of wooden bars or metal profiles is built and plasterboard is attached to them. Plus this method of aligning the corners and walls is that with the help of sheets of plasterboard, you can achieve almost perfectly smooth walls and straight corners in the room.

But there is a big minus room becomes less.

Which way to choose, decide for yourself. Do or not level alignment of corners and walls-this question, too, everyone is solved for himself. And if you think that the decoration of uneven angles will be enough, read the article further.

If there are children or pets in the house, the external angles are especially vulnerable. Wallpapers will wander decorative plaster At the corners will fall off. Unpleasant picture. But is it possible to exclude this process somehow? Sure! After all, now there are many decorative building materialsallowing it to do.

I chose plastic corners for itself to protect against damage to external corners in your corridor. This is an external angle, hoveed by wallpaper. We recently made repairs and wallpapers still fresh.

But if you look close, then the angle looks like this: an ugly junction between different wallpaper.

I measured the height of the corner from the floor to the ceiling and bought a plastic corner in the construction store. He cut off with ordinary scissors the desired size and inside smeared it with liquid nails.

And finally, glued to the corner. Agree, so much better. Of course, it was possible to choose another color to the corner, but I wanted contrast.

That's how it looks close. The angle in our corridor began to look careful and hid small irregularities.

As you already understood, the outer angle can be aligned and protected from damage using plastic corners. Now we are talking about those corners that glue right on top of the wallpaper. In construction stores, they are represented in different colors. Corner length is usually 3 meters, but the width is different: from the very narrow to wide. You need to choose in width, depending on how much the angle is heavily.

The more flaw, the wider there will be a corner. Look in the photo below, in stores you can find rectangular and even semicircular corners. Before you buy, think about which corner is suitable in your case.

But there are also such corners that stick to external or internal angles even before the walls are pasted on the walls. These corners are glued into the inner or outer angle, put off and thanks to this angle becomes much smaller. The wallpaper is pasted on top, decorative plaster or other finishing finish is applied.

As already mentioned earlier, a plastic corner can be closed both external and inner corner and even a bog between the wallpaper. But then it will not be a corner, but a plastic strip. Some decorative plastic corners are equipped with a sticky ribbon, removing the protective layer from which, without using glue, stick plastic on the wall.

Plastic corners look good on the walls with wallpaper. But S. tile Plastic is not very tied. But if you are not against the combination of plastic and tile, you can use them together.

There are plastic corners that are decorated for metal, such corners can come to almost any tile.

Ceramic corners can be used to finish the external and internal angles of walls with ceramic tiles.

If an external (or internal) angle is completely far from perfect, you can hide it flawed under decorative stone.

In construction stores you will find that shade and form artificial stonewhich you like.

Today, decorative corners on the corners of the walls - important element Decor. They help protect problem areas from mechanical damage. Their installation prevents damage to the road, gives the framing the interior of the finished appearance. We will tell about where such elements can be used, from which materials they are manufactured, as attached to the surface.

Source static.tildacdn.com.

Usal scope

Corners - the most problematic place. When repairing their repair, it is difficult to make a beautifully arrange. Wallpapers pasted on them, after some time, go out and dug. When furnaces are driving in the room or during permutation, there are often damage to solid large elements, which leads to an occurrence of a sloppy appearance. Prevent all this can be used if you purchase decorative corners for walls and install them even at the stage of finish finish. They will completely close the ends, allow you to form a smooth transition of one material to another, cover some sins of poor-quality work of the malaria.

Decorative Corners - Decor Element, Having Finished Completed Appearance Source Design-Homes.ru.

In addition to purely technical function, the angles are aesthetic load. If a white profile close the perimeter of the window opening, the window will look better. This technique is often used when, according to the design requirements, the window is not covered with curtains, but is executed using blinds. In this case, the color of the corner must coincide with the color of the wall finish. When the contrast is applied, the profile acts as a separate decor element. It immediately rushes into the eyes and becomes the original part of the interior.

Source i0.wp.com.

Designers love to apply corners decorative and for external framing of the doorway. Especially it becomes relevant when the wall thickness is larger than the width of the door box. This difference is completely closed by goodwill, and then overlap corner elements, the color of which completely coincides with the color of the door.

Source Skobdom.ru.

The external corners of the walls are needed, arched openings, protrusions and niches. Installing the corners will prevent the risks of their damage from a random strike. It is relevant when the walls are simply twisted or saved by wallpaper. In addition, it is easier to make cleaning and eliminate traces of hand. If the corners are closed with a plastic profile, follow the cleanliness will be easier.

Source sprofiles.ru.

Corners can close the ends of the wall, decorated with ceramic tiles or wall panels. Often, such materials of the edges remain not stitched, so the edge looks unavoidable. Profile installation helps to completely hide such a defect.

Source profil-mo.ru.

Another scope of application is to decorate the external corners of the structures collected by plasterboard. Today, the creation technology is actively used. open shelves, racks from this material. Shakes closed by a profile look more aesthetic.

Arch, the angles of which are closed with a decorative corner

With the help of decorative corners, you can make a framing for large mirrors, cover the plinths, any joints that take the angle shape. There are profiles under the plaster, model for ceramic tiles, profile products for baths, furniture.

Source 1Decor.ru.

Varieties of corners

Exterior Products and their specifications Depend on the material from which profiles are made. It determines the scope of use.

Source I.Bayimg.com.

Metal

For the manufacture of such corners, aluminum, brass or steel is used. Corners made of brass and steel have a smooth well-polished surface. Aluminum profile is represented in three species. There are on sale polished samples, anodized products, or decorative coating corners.

Source kantiere.ru.

Most often, such products are used in the furniture industry, but also designers like apply them when the walls are made up with furniture shields, MDF or chipboard sheets. In this case, a metal profile is selected, painted in the tone of the main material. Unscured metal corners are suitable for framing mirrors, paintings or posters placed under the glass.

Source www.bradjenkinsinc.com.

The masters use metal corners to create a base for installing light suspended ceiling designs like "Armstrong". With the help of them you can install the lungs plastic panels. They are able to act as anti-slip overlays or as protection edge of the structure from chips and cracks.

Source I.Pinimg.com.

Wooden finishing

Their main scope of use is the finish of the external or internal ends of the walls, covered by a block house, plaquene or clapboard. Are made of expensive or cheap wood varieties, so they have different price. They can additionally paint and lacquer, create various patterns on the surface with a milling machine.

Source static.tildacdn.com.

Recently, designers love to use the reception that allows you to cover the wall ends, assessed by wallpaper or painted painted. This is permissible only if there are strictly straight surfaces.

Avatars.mds.yandex.net source

Choosing this option of finishes, it is important to take into account that a wooden corner is a fragile product, with the slightest effort it can break or crack. To spoil his attractive appearance is capable of excessive moisture or long overheating. Therefore, they can not be fermented by walls and window openings in the bathroom or in the bath.

Wooden corners - fragile product

Elements made of wood with a joinery glue or PVA glue. Liquid nails are suitable for designated purposes. If the walls are not concrete, it is possible to mount wooden corners with finish nails. In this case, the gap between the edge of the profile and the head of the nail should be at least 10 diameters of the fastening element.

Source PILOMATERIAL-Stroi.ru.

Silicone transparent corners

Such products are ideal for the frame of the corners of the wallpaper. They are very soft to the touch. If they close the corners in the nursery, the children will be less injured. Silicone profile has only one disadvantage: its transparent texture is unable to close the finishing defects from an extraneous eye. This must be taken into account when choosing and buying products of such a plan.

Silicone profile - a great tool for ensuring the safety of children Source d.allegroimg.com.

On our site you can find contacts of construction companies that. Directly to communicate with representatives, you can visiting the exhibition of houses "Low-rise country".

Polyurethane

With advent polymeric materials The possibility of decorating residential premises was noticeably expanded. There are corners with smooth surfaces, with a complex relief, artfully imitating the texture of plaster stucco. Unlike a plastic profile, the thickness of the shelf they have more. This makes it difficult to the installation process, but the appearance of the finish from this wins. Polyurethane corner creates a solidity effect. In addition, it can be additionally paints applied in the decoration, and plastic profile not.

Source lative-oboi.ru.

In the manufacture of products used pressing technology. It allows you to create decorative profiles of various shapes. They are not afraid of moisture, temperature drops, serve for a long time.

Source 1Decor.ru.

Manufacturers offer universal white polyurethane corners, they are best suited for painting. There are profiles whose texture is skillfully imitates the tree. Beautifully look at the products, which have a smooth part painted, and the upper ornament is decorated for gold. Such corners are ideal for classic interiors. They are attached to a special glue composition. For these purposes, you can also use liquid nails.

Source CAP40.ru.

Colored plastic

Such products have a smooth smooth surface. They are made of polyvinyl chloride. Manufacturers produce collections in which products are presented by thirty shades. There are profiles that imitate the surface of the tree, metal. The scope of application is not limited to physical parameters, so the plastic profile is used quite wide. For design arches, flexible corners and arched articles are available.

Source kitchenremont.ru.

Mounted plastic profile on the posted wall simply:

1. On the surface of the inside of the profile, a glue is applied with a dotted line at a distance of 30 cm.
2. The profile after that is applied to the surface of the arch or straight end.
3. From above, the corner is fixed with molar scotch.

Source www.tehkomfort.kz.

To glue plastic to the surface of the wallpaper, it is important to make sure that the canvas firmly "sit" on the walls of the walls that the glue under them is good dry and provided a reliable clutch. Otherwise, under the severity of the ceiling, the wallpaper is bothering and hang. It is better to glue corners, a few days after sticking wallpaper.

Video Description

The video describes how to glue plastic decorative corners:

MDF

This material is also used to make a decorative profile. In the process of its creation, two strips of the same size are fastened with a duct film. It is superimposed on the front side. Its color and drawing coincides with the color and pattern of MDF. It is possible to use such products to decorate external corners, and for the framing internal. The degree of corner is not important.

Source Remont-book.com

Note!The corners made of MDF undesirable to exploit in the interiors of rooms with high humidity.

In this way, the angles of the walls, the MDF panels are drawn up Source www.meister.com.

Selection of angle design option

So that the premises of the room harmonized with its filling, it is important when choosing a profile to take into account different factors. It is important to pay attention:

1. On materials of surfaces. If the walls are truncated, ends, closed with a white plastic profile will look ridiculous.
2. On the color of the finishes. The red profile will spoil the overall impression if the room is made in pastel colors.
3. On the style of design. Metal profile is bad for interiors in classic styleBut he is able to emphasize the concept of High-Tek.
4. On the room features. A plastic profile is perfect for kitchen and baths, it is better to choose silicone corners for children's rooms. Wooden with chamfering will be appropriate for recording offices.

Design options can be different. The easiest way to choose the color of the profile under the color of the walls. He merges with him, and will not attract attention to himself. This solution is justified when the surface is often striking, it may be, for example, the angle between the hallway and the room.

Source www.grandecor.ru.

If the choice falls on wooden corners, designers advise to pick up the color and texture of the doors or floor finish. Then it will look organically. If you wish to save, you can buy corners of plastic under the tree.

ImageServer.Ibud.ua source

When creating laconic interiors with a stylistry of minimalism, the choice of metal corners becomes justified. They look good in high-tec, in the loft. Shelf width need to choose such that it completely covered the end of the corner. It is necessary to pay attention to this if the walls are covered with panels, plasterboard, if the insulation and sound insulation is additionally carried out. Such edge structures are always uneven, the angle decorative well closes all defects.

Source krovati-i-divany.ru.

Usually the angle between the slope and the wall is greater than 90 degrees. In order for the selected profile to be well to lie on it, it must be slightly bent. This can be done with metallic, and with a plastic corner. For this, experts advise the product to put on a flat surface with one edge, and then put pressure on top of hand and brush from the entire length of the corner. In the cold season, such a procedure should be done after the product of the day breaks into the room, and will take room temperature.

Video Description

The video describes how the metal profile is installed on the ceramic tile:

Briefly about the main thing

Decorative corners help solve many tasks. They improve the aesthetics of the finishes, protect the walls of the walls and their internal angles from mechanical damage. There are products inexpensive, mounted them are very simple, so if necessary, you can experiment and try to improve the design of the finished interior.

The most characteristic part of the house, from the point of view of architectural decoration, is the corner of the house. In this part of the building, you can see everything, or almost all elements of the facade stucco.

Decor of the oxle of the roof

Svet roof decorates a large or small, complex or simple, single or composite guide cornice. Auxiliaryly below can be the additional dividing strip on the facade, which allows the color zoning of the facade of the house. The angle itself is decorated with a variety of options to visually reduce or increase the height of the structure. Rusta, pilasters, combined options - These are the main types of the facade decor of the house. A separate and most important part of the decoration of the outer walls of the house is facade window decor.

Window decor

The main task in the decor of the window opening is also the leveling of the general proportions of the building due to the decor. In more detail and deployed about design of slopes of windows You can see on a separate page of our site. Also a very important part of the facade decor is an inter-storey, separation strip. With this decor element, the issue of separation is easily solved. different materials Finishing walls of the facade of the house.

Decor walls at home

Also, with the help of an inter-storey molding, we visually reducing not always a proportional height of the house. And finishing in a set of facade decoration of the walls of the private house is. This element is primarily a logical separator between the socket part of the structure and the main wall. Also, the base profile can perform technical functions - smoothing the difference in the protrusions of the wall and the base, drip, etc.

Below are some examples of finishing with the facade decor on the corner of the house. More ready-made facade design options at home you can see HERE.

1. Example Decor facade house

On this example of the facade country house Crubble eaves consists of two individual elements Forming massive filling.

Corner registration at home

The corners of the house are decorated with rustic stones with a chamfer. Rusts on the corner are not joined among themselves, and everyone is mounted on their side.

Window decor, slope

The second floor windows are framed by molding 12 cm width over the wall. The top of the window is complemented by a profile with an angular trimming, as well as a lock stone. On the windows of the first floor, in addition to the molding, a decorative suboofer profile is applied.

Decorative separation

In this case, a double inter-storey separation of the facade was applied. One strip runs along the second floor window sills, and the other on the slab overlap the first and second floors. This technique helps to significantly reduce the visual height of the building. A decorative framework with a fine facade profile is applied between separation strips.

Registration of soccer

Wall decoration materials

2. Example Decor facade house

In this fragment of the architectural decoration of the facade of the private house, the underproductive space is also filled with a combination of two separate stucco elements. The height of the composition is greater than its departure of the roof, which gives a strong undertaking the overall height of the house effect.

Facade stucco on windows

The second floor windows are framed by two separate moldings. On the edge of the slope, a flat profile, a symmetric convex element around it. In the external molding windows embedded brackets that support the massive top of the window. The top profile of the window is made with a bevel, which allows not to cover it additionally with the metal. The windows of the first floor are supplemented with a subooled profile and a curly riding with an angular trimming.

Corner registration at home

The corners of the house are decorated with rusts of different sizes with a chamfer in four sides. Rusts are located at a short distance from the corner.

Inter-storey separation

On this example, one strip is based on the second floor window sills, and the other on the slab overlapping the first and second floors. This technique helps to significantly reduce the visual height of the building.

Finish base at home

The base element is located a thin part up to smoothing the drop in the thickness of the base and the main wall.

Wall decoration materials

The main decoration of the walls is a core or decorative plaster. The finish coating of the walls after the installation of decorative stucco is applied. It helps additionally isolate butt stool decor elements to the wall. The base unit is decorated with marble or granite.

3. Example Decor facade house

In this set of the facade decor of the private house, the sv, the roof is also decorated with a combination of two separate stucco elements. The height and departure of the kit are almost the same, which gives a complete and deep filling of this part of the facade of the house.

Framing of windows

The windows of the second and first floors are decorated with a simple set of molding and window sill with the use of castle stone.

Finishing the corners of the house foam

The corners of the house are decorated with rusts of different sizes of a simple rectangular shape without chamfer. This option of rusts is usually mounted from migratory products.

Inter-storey separation is performed using two types of small profiles located at a distance from each other. The gap between them is painted in the color of the decor, thanks to which we get a wide separation on the facade.

Facing the socle

The base element is located a thin part up to smoothing the drop in the thickness of the base and the main wall.

Wall decoration materials

The main decoration of the walls is a core or decorative plaster. The finish coating of the walls after the installation of decorative stucco is applied. It helps additionally isolate butt stool decor elements to the wall. The base unit is decorated with marble or granite.

4. Example Decor facade house

In this set of the facade decor of the private house, the sv, the roof is also decorated with a combination of two separate stucco elements. The cross section of the elements has a greater number of bends and steps compared to the previous option.

Decorative window finish outside

The windows of the second and first floors are decorated with a large molding around the perimeter. The molding section has a pronounced, convex, rounded shape. The top of the window is mounted at a distance from molding and is supported by decorative brackets.

Facade of the facade of the house

The corners of the house are decorated with pilasters relative to a small width of the facade. Each element is located at a short distance from the corner of the house.

Separation, inter-storey strip

In the inter-storey separation, two separate elements were applied between which there is a strip of architectural ornament. The upper separation bar passes through the line of the second floor window. The lower band passes through the interpretable plate.

Finish the foundation of the house

You can take the composite design of the base part of the house, in this case, and the strip passing along the bottom floor line. This option is advantageous when there are so-called French windows - when the bottom windows are located not high on the floor. The base element is located a thin part up to smoothing the drop in the thickness of the base and the main wall.

Wall decoration materials

The main decoration of the walls is a core or decorative plaster. The finish coating of the walls after the installation of decorative stucco is applied. It helps additionally isolate butt stool decor elements to the wall. The base unit is decorated with marble or granite.

5. Example Decor facade house

This set of elements of architectural stucco can be described as a complex of geometry, configuration with decor elements. An additional thickness traverses are applied to create a larger relief and volume.

Registration of windows outside the house

The second floor windows are framed by a wide embossed molding width 18 cm. From the sub-circuit profile under construction under 45 degrees, addplenate reliefs under moldings imitating brackets are formed. The top of the window also has a complex relief due to a trigger at an angle. Castle stone is embedded in a portion of the windows top profile.

Exterior trim of corners of the house

Separation, inter-storey strip

Finish base at home

The base element is located a thin part up to smoothing the drop in the thickness of the base and the main wall.

Wall decoration materials

The main decoration of the walls is a core or decorative plaster. The finish coating of the walls after the installation of decorative stucco is applied. It helps additionally isolate butt stool decor elements to the wall. The first floor is made with a trap. This type of finish is performed by facade with the insulation of the walls. In the insulation, the grooves are produced, which are then reinforced with the corners with the main wall. The base unit is decorated with marble or granite.

6. Example Decor facade house

In this case, the main distinguishing feature of this composition is a massive, volume fraction of windows. The undercurrent eaves is made of two separate elements. mounted at a distance from each other. The gap between the top. The main cornese and smaller half-on the wall is painted in the color of the decor, which visually gives a single fig.

Design windows outside

The windows of the first and second floors are separated by small molding around the perimeter. Moreover, a curly frame in which the brackets are written. On the ground floor there is a straight top of the window from a large profile. In addition to him on the second floor there is an arched element.

Decor corners of the house foam

The corners of the house are decorated with rusts of a simple rectangular shape of the same size. Such execution is usually made by performers of facade work on the place or from the jogbook.

Separation, inter-storey strip

Between the floors, the volumetric, protruding separation strip. Dimensions and volume it creates an additional relief on the facade of the house.

Finish base at home

The base element is located a thin part up to smoothing the drop in the thickness of the base and the main wall.

Wall decoration materials

The main decoration of the walls is a core or decorative plaster. The finish coating of the walls after the installation of decorative stucco is applied. It helps additionally isolate butt stool decor elements to the wall. The base unit is decorated with marble or granite.

Related Posts:

• Facade design ~ 13+ Ready-made solutions appearance ...