"What are the best window profiles?" - a question that is asked by everyone who wants to finally install energy-saving windows in their home. However, despite the external similarity of all structures, inside all the profiles are completely different, some of which do not correspond at all to SNiP RF and are not recommended for installation in residential premises. First of all, when choosing a window system, it is necessary to pay attention to the number of cameras and the thermal resistance coefficient (the higher the better). Next important parameter PVC windows are provided for the possibility of reinforcement - this increases the load-bearing characteristic of the structure, contributes to an increase in the service life of the system and its resistance to plastic deformation. To make it easier for the buyer to decide on the choice of a high-quality window system, this rating was collected. So, TOP 10 best firms and models of PVC window profiles:

aluPlast

Aluplast opens the quality rating of window profiles. The company provides a good range of technical solutions for window systems. The latest developments in energy efficiency are embodied in the AluPlast energeto series. The Energeto 8000 model has excellent thermal resistance values ​​when installing a triple glass unit - 1.27 m2 * C / W. According to the manufacturer, if the structure is not reinforced with steel (this reduces the bearing capacity), its thermal conductivity is significantly reduced, reaching a thermal resistance coefficient of up to 1.67 m2 * C / W.

Deceuninck

Deceuninck is on the 9th place in the rating of pvc profiles. The Belgian company has been manufacturing PVC window blanks for about 40 years at production facilities located in Europe, Asia and North America. The flagship of all Deceuninck lines is the 84mm Eforte model. This system is recommended for installation even in the northern latitudes of Russia due to the high coefficient of thermal resistance - 1.1 m2 * C / W. The service life of "Eforte" is 30-40 years, subject to the temperature range from -60 to +75 degrees Celsius.

Proplex

The Russian company Proplex ranks 8th in the rating of window profiles in 2018. All Proplex products are manufactured in Russia, therefore, prices for finished products from this profile are much lower than imported counterparts. Proplex produces 5 different window systems: 2,3,4,5-chamber. For installation in summer cottages, loggias and non-residential premises, a two-chamber Proplex Outline is recommended - the cheapest design with a heat resistance coefficient of only 55 m2 * C / W. A more reliable system recommended for installation in apartments and residential premises is the four-chamber Proplex Comfort with a thermal resistance of 0.8 m2 * С / В, which fully meets the requirements of SNiP RF.

Kaleva

The seventh place in the rating of pvc window profiles is taken by the Kaleva brand. The firm produces a dozen different models, each with its own advantages and disadvantages. The most inexpensive option with everything you need is Kaleva Standart - this is a four-chamber profile with the possibility of steel reinforcement and a built-in double-glazed window filled with an inert gas argon, which has a very low thermal conductivity. The five-chamber window system Kaleva Titan Plus is the most heat-saving and sound-suppressing design of the company. Feature of Titan Plus: in addition to the main two-chamber 40mm step-glass unit filled with argon, shutters and one more external glass are built into the system - thus this model provides an incomparable degree of insulation, thanks to the step-glass unit with three independent air partitions, two of which are filled with argon.

Montblanc

Montblanc (read MONBLAN) is the leader in the 2018 ranking of plastic window profiles in terms of price-performance ratio. Mont Blanc is an Austrian company that has been producing low-cost high-quality profiles for translucent structures for over 15 years. Due to the opening of the Mont Blanc industrial plant in the Moscow region in 2001, the company gained wide popularity in Russia. The company produces several lines of window systems: Montblanc, Reachmont, Goodwin and ECP. All products have a guaranteed service life of 40 to 60 years and an installation width of 58 to 70 mm, except for the eighty millimeter Montblanc Grand with six air compartments. A four-chamber system Montblanc Quadro with a thermal resistance coefficient of 0.8 C / W per m2 is recommended for installation - this is a high indicator that meets the requirements of GOST and Building Codes and Regulations in many regions of the Russian Federation.

Salamander

The TOP 5 rating of profiles for plastic windows in 2018 is opened by one of the most expensive brands in the rating. The company has three different systems in its range: Salamnder 2d / Streamline / BlueEvolution. The cheapest option is considered to be a three-chamber 2D with the possibility of reinforcing the inner chambers with steel. Wall thickness of Salamander 2D: outer 3mm, folded 2.5m, and inner 1mm - this provides a good noise reduction rate (up to 46dB) and high energy efficiency class A +. This model is designed for the installation of a single glass unit. Salamander BlueEvolution is the next model recommended for installation in any region of Russia. BlueEvolution is the only profile available on the Russian market (meaning at a reasonable price) with a maximum width of the built-in double-glazed unit - 60mm (if desired, you can install a three-chamber double-glazed unit). Salander BlueEvolution is ideal for the continental climate of Russia: it protects from heavy rains, effectively maintains the temperature even at -40 degrees, and reliably resists drafts, thanks to an elastic rubber seal.

KBE

The 4th place in the rating of pvc window profiles belongs to the German manufacturer KBE. The names of the KBE lines are banally simple and depend on the profile width: KBE 58/70/76/88. As anyone who plans to change windows should know, the wider the system, the more chambers in it, which means that the heat saving rates of such a structure are obviously high.

The best option for installation is the KBE76MD model - this is a six-chamber design made using greenline lead-free technology from recycled polyvinyl chloride. Recycling PVC allows you to "kill" "two birds with one stone" at once: to dispose of PVC waste, and to save on the cost of raw materials, which directly affects the retail price of the product.

The most important thing in the greenline technology from KBE is the complete preservation of the physical and mechanical properties of the material, that is, raw materials for primary processing are no different from recyclable materials. The best product from KBE is the 88 mm KBE AD made using greenline technology: this model has an outer wall thickness of 3 mm and 6 independent air compartments inside with the possibility of aluminum reinforcement - all this provides an unconditionally high rate of thermal efficiency and noise reduction.

VEKA

The bronze medalist of the rating of the best pvc window profiles goes to VEKA. VEKA offers 8 models of class A with an outer wall thickness of 3mm. The most economical solution is VEKO Euroline: a structure with three air chambers designed for a step-glass unit up to 24mm (usually two glasses - one chamber), the sashes and frames in which it is possible to reinforce for greater system reliability.

The energy-efficient A ++ class VEKO Swingline series will be the optimal solution in terms of price-quality ratio for offices and apartments: 5 independent air chambers with an outer wall thickness of 3 mm will provide warmth and comfort in the room even on harsh winter evenings. The most expensive and massive example is VEKO Alphaline. This model is equipped with six air compartments with a total width of 90mm - these are the most heat-saving windows from VEKO, in which you can install a double-glazed unit up to 50mm thick (3 glasses) and enjoy peace and quiet all year round.

WDS

WDS ranks second among the best profiles for plastic windows in 2018. The manufacturer has several product lines in the assortment, each of which has a difference in noise reduction coefficient, heat saving and the number of cameras: WDS 400/500, WDS 4/7/8 Series. The best in terms of price-quality ratio is the A-class model 60mm WDS4, equipped with 4 independent air chambers, the possibility of aluminum reinforcement up to 1.5mm. For northern latitudes, it recommends the WDS8 series for installation: a six-chamber metal-plastic profile with the ability to mount a double-glazed window up to 44 in width - this model retains heat 2.5 times more efficiently than the WDS400 / 4Series.

Rehau

Rehau is the leader in the rating, the best profile for plastic windows in 2018. The range of the company consists of 7 types of profiles with a different number of air chambers, construction widths and sound insulation levels. The Rehau Euro-design series is an affordable and high-quality three-chamber profile with a thickness of 60mm, therefore it is recommended for installation for those who do not want to overpay. For those who love sound sleep, Rehau Intelio will be a real find: a five-chamber 86mm thick profile with a noise reduction coefficient of 36dB (without a glass unit).

In cold climatic zones, the 86 mm Rehau Geneo will help save up to 80% of heat: the six-chamber design provides high tightness, maintains a colossal gap between the temperature ranges in the room and outside the window, and also creates reliable protection from drafts, thereby maintaining comfort and coziness in indoors throughout the winter, even at -60 degrees. According to the manufacturer, all Rehau products have a minimum service life of 40 years, and some models even 60 years.

No one will refute the truth that in our latitudes, good windows in an apartment or house are essential. Many buyers are confused by the apparent simplicity of the designs. It is believed that there is nothing particularly complicated in plastic windows - an ordinary frame, glass, a simple locking mechanism. There are differences between window designs and are often quite significant.

There are significant differences between windows from different manufacturers. In the last 2 decades, PVC structures have become popular. PVC profiles differ in material quality, uniformity, thickness, width. There are a number of other parameters that the manufacturer of high-quality windows takes into account - we will analyze them in the further description. In the review, we will consider the top manufacturers, the best pvc windows in 2019-2020.

What are the best pvc windows to choose?

First of all, it should be noted that quality material for a PVC profile it has a smooth structure without roughness, graininess, has a uniform color, odorless and irregularities. Polyvinyl chloride is resistant to moisture, chemicals (solvents, acids, oils), and temperature extremes. High quality PVC is harmless to the environment and people. The best PVC profiles are resistant to the adverse effects of high and low temperatures, not subject to deformation and discoloration.

A high-quality profile does not change shape due to metal reinforcement. Such products provide reliable thermal insulation and have good soundproofing properties. In addition to heat conservation and sound insulation, plastic windows can perform other functions: protection from heat and bright sunlight, protection against burglary. In the first case, glass tinting is used in the manufacturing process, in the second version, hardening and reinforcement are used.

Due to the presence of many companies on the market, buyers often do not know which pvc windows are better. Experts recommend choosing designs not only by brand or cost, but also by personal preference. Relying on the quality of products with a low price and an unknown company is also not worth it.

Criterias of choice

When choosing plastic windows, you should pay attention to especially significant indicators: the number of double-glazed windows and air chambers in the profile, the thickness and width of the profile, the quality of the fittings and the sealant. On the question - which profiles of pvc windows are better. The normal width of the profile to ensure thermal insulation and silence is at least 50 millimeters. The best specimens are 58 to 70 millimeters wide. In northern and very noisy areas, wider

The profile thickness for residential premises must be at least 2.5 millimeters (inner walls) and 2.8 millimeters (outer walls). Thinner walls have less thermal and noise insulation properties. The optimal number of air chambers in a profile is from three to eight units. The more cameras the better.

Experts advise against choosing ordinary glass. Nowadays, double-glazed windows with fire-resistant, laminated glass (practically not broken) are being produced. Specimens are available with a special coating to reflect the sun's rays. Reputable companies do not skimp on the quality of fittings. Good locking and stopping devices are an equally important part in plastic windows. Silicone and rubber are used as good seals. These materials do not deform and are durable. Rubber seals are less durable and cost significantly less.

Top manufacturers

There are many large companies and small firms. It is difficult for a buyer to choose a particular brand. The quality and cost of products varies greatly. The main global manufacturers of quality windows:

• Veka;
• Kommerling;
• Deceuninck;
• Rehau;
• Montblanc;
• Salamander;
• LG Chem;
• Schuko;
• Kaleva;

There are many small, little-known companies. The quality of the products is difficult to verify. Therefore, when choosing, it is better to focus on reputable brands.

Best plastic pvc windows

The review includes plastic windows, taking into account functional features, demand and customer reviews. The list was compiled after analyzing the characteristics, properties of structures. The popularity of the brand, competitive qualities and cost of products were also taken into account.

Popular brand profile Rehau

Average cost - 9500 rubles

In Russia, the German brand "Rehau" produces high-quality plastic windows with a high degree of wear resistance. Rehau is one of the world's leading sellers. The company's products are manufactured in many countries, have international certificates of quality, safety and compliance.

Many models of profiles are installed in children's and medical institutions. Defects in production are excluded due to absolute control by the management and specialists of the company. The service life of Rehau window structures is 50-60 years.

Companies for the production of profiles "Rehau" produce several types of multi-chamber and simple high-tech window structures. Profile material of German developers can be used for the production of custom windows. Company profiles differ in characteristics, dimensions and parameters.

The main types of profiles: Delight Design (70 mm, 5 chambers), Rehau Brillant Design (70-80 mm wide, 5-6 chambers), Geneo (86 mm wide, 6 chambers), Euro Design (60 mm, 3 chambers), Intelio (86 mm, 6 cameras), Blitz (60 mm, 3 cameras), Sib Design (70 mm, 3 cameras and 5 cameras thermoblock).

1. Brillant Design is a premium profile. The material has improved characteristics in terms of sound insulation and heat saving. Air impermeability and moisture protection are provided by 2 types of sealing. Locking mechanisms provide increased burglary protection. The thickness of the glass is more than 40 millimeters.
2. The budget version of the Blitz profile has good parameters for keeping warm even in severe frosts. The design has locking mechanisms against burglary, 2 types of seals to ensure air tightness and protection from moisture.
3. The Sib Design profile is suitable for the Russian climatic zone. The constructions provide excellent thermal protection (2 types of gaskets), the possibility of installing a double-glazed unit thicker than the standard version, watertightness, and have anti-burglary locking mechanisms.
4. Geneo's profile is a new development of German specialists. High heat-shielding properties are provided by composite fiber material. The products are lightweight due to the material used instead of heavy steel elements. The design provides excellent sound insulation - 50 decibels, has anti-burglary locking mechanisms, 2 types of seals, a convection limiter.
5. The budget version of the Euro Design profile provides reliable protection against cold, dampness and burglary. The design includes: 2 types of seals, anti-burglary locking mechanisms, decorative film for wood.

Pros:

• a large selection of designs;
• all structures are burglar-proof;
• seals against dampness;
• availability of a guarantee.

Minuses:

• High price.

High quality Salamander profile

Average cost - 26,000 rubles

The profile from the German brand "Salamander" (company "Salаmander GmbH Industrie-Produkte") is produced in Germany. The subsidiaries produce windows under the name "Brugmann". The company produces a wide range of profiles with different parameters and characteristics. Windows are available in color and white.

There is a choice of single-chamber to six-chamber profiles. Profile types: Streamline (76 mm wide, 6 chambers), Design 3D (76 mm wide, 4-5 chambers), Design 2D (60 mm wide, 3-4 chambers), bluEvolution category A (92 mm wide, 3 gaskets, 5-6 chambers, glass unit 60 mm). Average sound insulation properties - up to 46 decibels. The durability of products in conventional years is 45 years. Factory warranty - 5 years, for accessories - 10 years.

Guaranteed frost resistance - up to -55 degrees. Salamander designs include anti-burglary mechanisms (resistance RC2), high-quality seals with resistance to heavy rains of class 9A, resistance to wind loads of B4-C4 class.

Pros:

• Internal and external quality of the material;
• quality is controlled by company representatives;
• Beautiful design;
• long warranty period and post-warranty service;
• different colors;
• excellent heat protection, water resistance, sound insulation.

Minuses:

• A very expensive profile.

KBE profile

Average cost - 7800 rubles

The German quality of the KBE brand was highly appreciated by buyers from Russia. The products are competitive in terms of thermal insulation, moisture, wind, sound insulation and cost. The products have certificates of quality and conformity to ISO.

The company manufactures products: KBE 88 (width 88 mm, 6 cameras), KBE Expert + (width 127 mm, 5 cameras), KBE Select (width 70 mm, 5 cameras), Engin (width 58 mm, 3 cameras), Standard ( width 58 mm, 3 cameras), KBE Expert (width 70 mm, 5 cameras), KBE Energy (width 70 mm, 3 cameras), KBE Etalon (width 58 mm, 3 cameras), KBE Extra (width 127 mm, 5 cameras ), KBE Balance (70 mm wide, 3 chambers), KBE Elita (70 mm wide, 5 chambers).

Guaranteed frost resistance - from -40 to -65 degrees. Average sound insulation properties - up to 48 decibels. KBE's products are supplied from Germany and manufactured at Russian factories. The durability of products in conventional years is 50 years.

Pros:

• Long service life;
• good value for money;
• excellent properties (moisture resistance, thermal insulation, noise protection);
• a large assortment;
• manufacturer's warranty.

Minuses:

• No flaws were found.

Montblanc Profile

Average cost - 7900 rubles

Extrusion STL operates under the Montblanc brand and produces standard and premium profiles. The production uses high-quality primary polyvinyl chloride of German production (Vinolit), which is considered an environmentally friendly and fireproof material.

The concern has a large dealer network and several factories in Europe and the former Soviet republics. The products are distinguished by their beauty, ease of use, and thoughtful design. The glossy, rounded profile shapes are easy to clean. There is a wide color range of products, quality certificates and ISO conformity.

The line of designs includes several main models: Grand 80 (80 mm wide, 6 chambers), City 120 (120 mm wide, 5 chambers), Termo 60 (60 mm wide, 5 chambers), Nord 70 (70 mm wide, 5 cameras), Eco 60 (width 60 mm, 3 cameras, thermal protection class B2),

Quardo 70 (70 mm wide, 4 cameras), Logic (58 mm wide, 3 cameras). Average noise insulation properties of the profile - up to 49 decibels.

Pros:

• Good value for money;
• there are no sharp corners in the models;
• quality of material and workmanship;
• reliable fittings of European quality;
• durability (60 years);
• wide range of;
• reliable noise and heat insulation;
• environmentally friendly material;
• the ability to use in different climatic zones;
• fire safety.

Minuses:

• No flaws were found.

Vеka profile

Average cost - 9600 rubles

The profile under the Vеka brand is produced in Germany and Russia. The company has an extensive dealer network and a number of subsidiaries. The product quality is very high. The Vеka profile is distinguished by increased environmental safety, improved thermal insulation, soundproofing, and burglary protection. The Vеka profile has the RAL quality mark (Germany), international certificates of conformity and ISO quality. The durability of products in conventional years is more than 40 years.

In the production of window structures, energy-saving, soundproof and standard glass units are used. PVC does not turn yellow and does not fade. High-quality seals do not dry out in hot weather and do not freeze in freezing cold. The line of designs includes several main models: Proline (70 mm wide, 4 chambers), Alphline (90 mm wide, 6 chambers), Softline (70 mm wide, 5 chambers), Euroline (58 mm wide, 3 chambers), Softline 82 (width 70 mm, 6-7 chambers), Swigline (width 82 mm, 5 chambers).

Pros:

• High quality material and workmanship;
• a large assortment;
• certificates of conformity, quality marks;
• suitable for all climatic zones of Russia;
• variety of colors;
• environmentally friendly material.

Minuses:

• Slightly overpriced.

Kaleva's profile

Average cost - 10,000 rubles

Kaleva products are highly reliable and simple in appearance. The company produces balcony and sliding doors, plastic windows in the usual version (PVC) and combined, four, double-glazed windows. The company specializes in the production of high-quality designs for loggias and balconies. In the production of products, the company uses high-quality material of Austrian origin, which does not fade or deform under the influence of frost and heat.

The line of designs includes several main models: Kaleva Deco (70 mm wide, 5-6 chambers), Kaleva Design (70 mm wide, 4 chambers), Kaleva Standard (70 mm wide, 4 chambers), Kaleva Design + (70 mm wide , 4-5 chambers), Kaleva Vita (70 mm wide, 4 chambers). The product line includes classic and designer options.

The company independently produces a series of structures in different forms: trapezoidal, polygonal, rectangular, triangular. The products are distinguished by a variety of devices: tilt-and-slide, swivel, swing-out, folding. Protection against deformation and tightness is ensured by gluing the triplex into the glass unit. Average noise insulation properties of the profile - up to 38 decibels.

Pros:

• Attractive design;
• good quality material and workmanship;
• variety of mechanisms and forms.

Minuses:

• Slightly overpriced.

Deceuninck profile

Average cost - 10,800 rubles

The company "The Deceuninck Group" under the Belgian brand "Deceuninck" is one of the leaders in the production of high-quality PVC profiles. The factories of the concern are open throughout Europe and in Russia. The company's products can withstand very low temperatures - up to -60 degrees. No harmful substances are used in production. Elastic seals are resistant to adverse effects of sunlight, moisture, frost.

Deceuninck products have international certificates of conformity and quality ISO. The line of designs includes several basic models: Eforte (84 mm wide, 6 chambers), Forward (60 mm wide, 3 chambers), Favorite Space (76 mm wide, 6 chambers), Bautek (71 mm wide, 3 chambers), Favorite (71 mm wide, 5 chambers). The seals do not freeze in severe frosts and do not dry out in the heat. The durability of products in conventional years is more than 40 years.

Pros:

• Value for money;
• a variety of innovative systems, mechanisms and forms;
• high quality material;
• high-quality assembly;
• good thermal insulation at very low temperatures;
• security;
• a large assortment;
• functionality;
• Beautiful design.

Minuses:

No flaws were found.

Good day! Every person in life is faced with the question of choosing a high-quality plastic window. If you are faced with such a problem, I suggest reading this article.

My many years of experience in working with plastic windows gave me a lot of knowledge, which I will gladly share with you.

The plastic window is made of a multi-chamber system, which not only retains heat, but also protects the house from moisture, dust, wind and noise. For the selection of quality windows, the manufacturer plays an important role in the first place. It is better to choose a window manufacturer based on customer reviews, friends who installed windows. Most popular manufacturers: Rehau, KBE, Veka, Salamander, Proplex.

An important role is played by the material from which the profile, glass unit and fittings are made.

Feedback and advice from our clients on how to choose the best and highest quality plastic windows

If you decide to install windows, then you first need to decide which plastic windows to choose. It is important to know what to pay special attention to in order to avoid many problems. We provide below reviews of plastic windows that are left by our customers. Perhaps they will help you understand the question - how to choose plastic windows.

Anatoly, 45 years old, Moscow:

Pay attention to the type of profile used. The profile can be imported or domestic. Many experts argue that imported ones are of better quality - and this is so. Sometimes, in order to make an inexpensive profile, they use secondary raw materials. Therefore, be sure to check this point with consultants. Carefully study the cut that you are shown as an example - its thickness should be 1.5 mm, it should be made of galvanized steel. Only such a profile will be reliable and of high quality.

Try to carefully consider the supplied accessories. High-quality fittings are made in Germany. The simplicity and ease of control of your plastic window depends on it.

The number of air chambers inside the window must be at least three.

The company that manufactures plastic windows must have samples of work and profile cuts. Production and installation must be certified. Never hesitate to ask for supporting documents and samples. This will later save you from many worries.

The correct plastic windows will serve you reliably. I would like to note that only professionals work in the company "Repair" of windows. You can trust them with your home without a doubt! "

Stanislav, 37 years old, Moscow region:

“… I would like to advise all those who wish to purchase the best plastic windows to pay attention to the quality of double-glazed windows.
A high-quality glass unit should be:
Not less than 32 mm thick;
There must be at least two air chambers in a glass unit;
Must have a heat-reflecting coating;
Glass grade must be M1-polished;
When I needed to change the window in the kitchen in my apartment, I turned to the Window Repair company. The double-glazed windows turned out to be of really high quality - they are not afraid of any wind and frost. Guys, thanks! "

Svetlana, 30 years old, Moscow:

“… Plastic windows - which ones are better? In my opinion, brands such as Rehau, Veka, KBE should be trusted. Plastic windows are really high quality - reliable thermal insulation, ease of operation, burglar-proof system. The windows look solid, there is no noise from the street. I installed Rehau plastic windows in my apartment, and Veka in my parents. With such windows, cold winters are not terrible, and in summer it is quite comfortable with the help of mosquito nets. Thanks to the staff of the "Window Repair" company for their advice and assistance in installation! "

Contact our company and purchase high-quality plastic windows for yourself, which will help you look at the world around you in a new way!

source: http://www.okna-plastiq.ru/

Choosing which windows to buy for your home or office, each of you is looking for the best solution to preserve warmth and comfort, trying to find the best combination of price and quality. The manufacturer of high-quality plastic profiles recommends paying attention to the following parameters of a PVC window:

Profile

There are several grades of profile quality, determined by the thickness of the outer wall. A thinner profile can cost less, but it cannot always ensure the preservation of the consumer properties of the window - heat and sound insulation, geometric stability, durability. The best firms work with a class A profile, which guarantees quality.

Fittings and components

Good quality windows should open and close without problems at any time of the year, protect from dust and street sounds. Cheap seals, handles, rotary fittings and fasteners not only reduce the cost of the window, but also reduce its quality. Indeed, with bad components, even a first-class profile will not save you.

Glass

Pay attention to which glass the manufacturer uses. Good windows have glazed windows of polished glass, often with sunscreen coating. Cheap Chinese glass can later upset you with cloudy stains, scratches and even cracks in severe frosts.

Mounting

Whatever the best PVC windows, improper installation will wipe out everything. We advise you to use the window installation services offered by the manufacturers themselves. Involvement of outside people in the installation or self-installation will void your right to warranty service.

Price

The final cost of the window with installation depends on all the previous points. It is possible to find and supply a window at a lower cost, but the total savings can be up to 20% maximum and the lifespan of the window will be unpredictable. Just find out how much maintenance and repair costs, and consider whether it is worth installing windows that may need to be repaired.

From the experience of cooperation with window manufacturers, we confirm that the most common problems in window operation are caused by poor-quality fittings and improper installation. It is better to spend a little more money and install the highest quality window than to regret the money spent and get ready for the renovation again.

source: http://www.veka.ru/

The rating of plastic windows is one of those criteria by which it would be quite easy to determine the best plastic windows. However, you will not find such an objective and comprehensive rating. There are several reasons for this.

First, the rating of plastic windows cannot be objective, since the assessment will always be based on subjective judgment. Expert or popular opinion is always only the opinion of the subjects based on some criteria, the set of which is very different.

Secondly, the rating of windows cannot give a comprehensive assessment, because window products are a technically complex product with versatile and multifaceted characteristics. It is not at all necessary that the best window should be made of the thickest (widest) profile and the warmest glass unit is not always necessary for glazing.

Thirdly, the rating of brands of plastic windows cannot guarantee the quality of PVC windows in operation. Even the best rating windows can be damaged by poor quality installation or perform their functions improperly due to manufacturing defects.

Which plastic windows are better: Veka, Rehau, KBE?

As in any question: a fish is looking for where it is deeper, and a man for where it is better. In this regard, it is always more interesting for an ordinary consumer to buy a better quality product at a favorable price. Therefore, having an idea of ​​which product from the presented line has the most the best characteristics- it is always easier to find it at the best price.

Choosing windows popular today on the basis of Rehau, Veka, KBE, etc. profiles, a person makes a conscious choice in favor of a well-known and reliable brand. However, windows based on the best technical profile have excellent potential, but do not guarantee superior performance.

Indeed, in addition to the profile itself, the window contains fittings, a double-glazed window, the quality of work of the window manufacturing company and the installers of the installer company. Thus, it is not necessary that a window from the Rehau brand profile will be better than KBE or Veka windows.

Why is there still no better window company and better plastic window?

This question torments both buyers and sellers of windows, journalists of popular magazines and editors. Increasingly, a question is asked on the topic of choosing the best PVC windows on construction forums and in search engines. But the answer, unambiguously fair and correct, has not been found. Why?

One of the reasons is the complexity of the design itself, as we described earlier, which is made up of a large number of elements. Both expensive and high quality components and less expensive, less reliable components can be used here.

Add to this the human factor, which is present in any assembly and manufacturing process using the labor of a living person. You will get a black box with a large number of unknowns at the entrance and a product with mysterious properties at the exit.

Another component that also takes place in determining the quality of the installed window is the installation process. It is not difficult to imagine a situation when a perfectly made window in everything will be irretrievably damaged by an inept installer.

Note!

It was the complaints about such an attitude that we heard in the process of “sanitation” of residential buildings. Installation of plastic windows was entrusted to non-professionals, and as a result, initially good-quality windows turned into a non-functional and low-quality element of a window opening in the end.

If, nevertheless, to determine the best window, then for this it is necessary to compare and select products according to the following rules or in one of the following ways: by price, by quality, by the optimal price-quality ratio.

The methodology of an independent rating of plastic windows, which gives an interesting assessment to the buyer, as it seems, should be based on absolute values ​​directly related to window construction... The quality of services (delivery, installation) can be assessed in relation not to a window, but to a specific window company.

Summary:

• The rating should include products - plastic windows and PVC doors - of the same "weight" category. Having similar, if not the same, technical characteristics. Windows of different segments should be compared in their subgroups.
• The rating should evaluate the same parameters according to a pre-agreed list - the most significant characteristics from the point of view of the window consumer.
• The rating should be compiled by an independent group of experts or formed by public opinion - a representative sample from the aggregate of all possible window consumers.

Only by working in this vein, the results obtained will make at least some sense, and the rating of plastic windows itself will be in demand, useful and relevant when choosing windows and purchasing them.

source: http://pvc-profile.ru/

What are the best plastic windows to install?

At first glance, the design of plastic windows is very simple - glass, frame, handles. However, windows from different manufacturers differ from each other both in quality and in price. Choosing windows of a well-known brand, the buyer pays not for a big name, but for reliability and durability. Let's take a closer look at all the elements that make up the windows, and find out which plastic windows are better.

What plastic windows are best for an apartment or house? Good plastic windows don't just cover a window opening - they serve many functions.

The main one in our latitudes, of course, is heat conservation. Owners of low-quality windows are well aware of the problem they can become in winter. Cold and drafts are inevitable for those who decided to save money and supply the cheapest handicraft model.

But the best plastic windows provide perfect thermal insulation - for example, when it's -5 o C outside, the temperature near the inner glass never drops below +20 o C. In summer, windows can protect an apartment from heat and too bright sun - for rooms facing south, you can choose windows with tinted glass units and protection against infrared radiation.

An important function of plastic windows is sound insulation, especially for those who live near a busy road. Sound insulation depends on the thickness of the glass and the distance between them.
Windows also protect the house from illegal entry.

Helpful advice!

Well-known manufacturers are constantly improving the burglary resistance of windows, and many models are not easy to open from the outside. And, of course, do not forget about such trifles as protection from insects with a mosquito net and from light with blinds.

There are many firms producing plastic windows - about 10-15 largest manufacturers (KBE, Rehau, Veka, Salamander, Schuko, Kommerling, Proplex, Deceuninck, Montblanc, LG Chem and others) and several dozen smaller ones. Each company offers a number of lines of windows - from affordable prices to luxury options.

It is not easy to understand such a number of proposals, it is even more difficult to say which companies of plastic windows are better. When choosing a window, one should start not from the brand or, moreover, the price, but from your own needs. Here's what to look for when choosing a window:

Profile material and uniformity

Usually a profile for plastic windows is made of PVC, reinforced with metal. PVC is resistant to deformation, harmless to humans and the environment, not afraid of temperature changes, moisture, oils, acids and solvents. PVC can be used to make not only standard square and rectangular windows, but also structures of any shape - round and semicircular, triangular, etc.

High-quality PVC of uniform color, its surface is smooth, without grains, irregularities and streaks, it is absolutely odorless.

Profile thickness

The profile is a structure with internal partitions. The thickness of the outer and inner walls of the profile is normalized. Depending on it, the profile is assigned to one of three classes - A, B or C.

1. Class A - outer walls from 2.8 mm thick, inner walls from 2.5 mm. Windows from such a profile provide good heat and sound insulation, they are installed in residential premises.
2. Class B - outer walls from 2.5 mm thick, inner walls from 2.0 mm. Class B profile windows are recommended for installation in non-residential premises. They are less durable, retain heat worse, and do not provide sufficient noise protection.
3. Class C - all other profiles that do not meet standards A and B. There are no strict requirements for a class C profile.

Obviously, the thicker the profile, the stronger and better it is. Most modern window profiles have an outer wall thickness of 3 mm or more.

Number of air chambers

There are several cavities inside the profile - air chambers that provide protection from cold and loud sounds from the street. The minimum number of cameras in a profile is 3, the maximum is 8. The most common 3- and 5-camera profiles. 3-chamber is suitable for windows facing a quiet courtyard or south, 5-chamber is better for windows facing the road or facing north.

A double-glazed unit is called a block of glass, hermetically connected to each other. The space between the two sheets of glass is the chamber. Many people confuse cameras in a profile and cameras in a double-glazed unit, but these are different concepts.

The most common double-glazed unit is a two-chamber one, consisting of three glasses and two chambers between them. However, there are also three- and four-chamber double-glazed windows for particularly cold climates. Single-chamber packages are only suitable for glazing loggias, balconies or gazebos.

The quality of the glass is no less important than the number of chambers in a glass unit. Regular glass is the cheapest, but today many people choose glasses with additional properties. For example, glass with a coating that reflects infrared rays - it is as transparent as ordinary glass, but at the same time it keeps warm in winter and pleasantly cool in summer.

Note!

There are fireproof glass that does not break even when exposed to extremely high temperatures, and glass laminated with triplex - such a window is almost impossible to break, but even if someone succeeds, there will be no sharp fragments when broken.

Quality of seals

Seals are needed so that the window closes tightly, as well as to ensure the tightness of the glass units. Seals are made from rubber, rubber-plastic, silicone or natural rubber. The most inexpensive (and short-lived) option is rubber; rubber and silicone seals are installed in the windows at a higher price. They do not deform even after long-term use, temperature drops also do not affect their quality.

Profile width

The profile width must be at least 50 mm. Most of the best PVC windows are 58-70 mm wide or more. The thickness mainly depends on the number of glasses - the more there are, the warmer and wider the window. In most cases, the width of 58-70 mm is sufficient to provide warmth and silence in the house, wider profiles are in demand in a harsh northern climate or in very noisy areas.

Fittings

A plastic window is a rather heavy structure, moreover, it is constantly exposed to stress - windows are opened and closed every day. Therefore, the fittings for such windows must be especially reliable. Most often, the owners of cheap low-quality windows complain precisely about the fittings - the handles loosen and fail, or even fall off altogether, the window hinges are jammed and warped.

To avoid such troubles, buy windows from reputable manufacturers who not only strictly control the quality of the fittings, but also constantly develop new, more convenient and durable systems. Adjustable fittings are better than unregulated ones - they allow you to open the window just as much as required, and special stoppers will not allow a draft to close the window.

Burglar-proof systems will prevent intruders from entering the house (this is especially true for apartments on the ground floor, summer cottages and private houses). Worthy manufacturers of window fittings include Roto, Aubi, Winkhaus, Siegenia.

The best manufacturers of plastic windows and prices

Manufacturer	Dignity	disadvantages	Cost (for a double-glazed window 1400x1600 mm)
	Durability, high performance of heat and sound insulation, environmentally friendly plastic. KBE windows are hermetically sealed, withstand temperature drops from +50 o C to -50 o C. A well-thought-out ventilation system that does not allow the windows to fog up.	Relatively high price. The plastic may turn slightly yellow over time.	From 13,000 rubles
	Durability, good sound and heat insulation, a wide range of models, environmental safety, frost resistance.	Low sash height and somewhat higher cost in comparison with other brands.	From 13 500 rubles
	Low cost, durability, adaptation to Russian conditions, plastic, characterized by strength and whiteness.	The design of some models is morally outdated. No international certification.	From 11,000 rubles
	Durability, high noise and heat insulation, tightness, a wide range of models. Rubber sealant that is not afraid of low temperatures.	Relatively high price.	From 12 500 rubles
	Low cost, very good design, adaptability to Russian conditions, a wide range of models, durability, full control over the production cycle.	Lack of a certificate for the quality management system, weak fittings, an unpleasant chemical smell from the seal.	From 10,000 rubles
	High quality, good thermal and noise insulation characteristics, laconic design, high-quality glossy plastic, good value for money.	More common in the Far East than in the central part of Russia. The consumer properties of windows from this profile have not been fully studied, due to the relatively recent introduction to the market of the central part of Russia.	From 12,000 rubles
	Very rigid construction, resistant to deformation, good design, reliability, good tightness, a wide range of models.	Heavy profile, not very suitable for doors, built-in blinds that break after a few years.	From 12,000 rubles

As you can see from this table, the products of each company have their pros and cons, so the choice depends on your preferences. Better yet, seek advice from the specialists of the company that installs plastic windows - they are aware of all the strengths and weaknesses of each brand and the intricacies of operation.

From this overview you will learn:

• Popularity rating of plastic windows on the Internet
• Which profile for windows is better according to GOST and Eurostandard
• How to determine a quality profile by appearance
• Tips for choosing a profile for a window

The ranking is based on the statistics of the Yandex search engine. The analysis of user queries allows you to find out the popularity of brands of the profile of plastic windows among the population of Russia. After analyzing the most popular user requests, we managed to identify the TOP-3 of the most popular among the profile systems.

Rating of TOP-3 most popular profile systems in Russia according to Yandex statistics: REHAU, VEKA, KBE.

The graph shows the dynamics of requests for requests:

• - "plastic windows rehau"
• - "plastic windows of the century"
• - "plastic windows kbe"

According to statistics for 2017-2018-2019 on the territory of Russia, the demand leader among Internet users is:

1. The greatest demand is for plastic PVC windows of the Rehau profile. Average 5627 hits per month for 2019.
2. The second most popular are plastic windows of the Century (VEKA). On average, 2510 hits per month for 2019.
3. In third place are KBE windows. Average 755 hits per month for 2019.

Which profile for windows is better according to GOST

GOST is an interstate standard, the requirements of which must be observed in the countries: Russian Federation, Armenia, Kazakhstan, Kyrgyz Republic, Moldova, Tajikistan, Uzbekistan.

The criterion for the quality of plastic profiles for windows in Russia is GOST 30673-99 “PVC profiles for window and door blocks. Technical conditions ".

Criteria and profile class according to GOST 30673:

External front wall thickness	Class A - 3mm + 0.1mm -0.3mm Class B - 2.5mm + 0.1mm -0.3mm Class C - not standardized
Reduced resistance to heat transfer	Class 1 - St. 0.80 m 2 ° C / W; Class 2 - 0.70-0.79 m 2 ° C / W; Class 3 - 0.60-0.69 m 2 ° C / W; Class 4 - 0.50-0.59 m 2 ° C / W; Class 5 - 0.40-0.49 m 2 ° C / W;
In addition, the indicators of the properties of the profiles must meet the list of requirements that determine the possibility of using a window profile for the production of windows: Tensile strength, Tensile elasticity Impact strength Softening point Change in linear dimensions after heat exposure Heat resistance Brittleness (resistance to impact at negative temperatures) Color change after irradiation Change in impact strength after irradiation The tensile strength of welded joints must be at least 70% of the strength of whole profiles (welding strength factor - 0.7) Durability of at least 40 conventional years of operation (2002 amendment, earlier - at least 20 years) Resistance to mildly corrosive acid, alkaline and salt attack Profiles during operation and storage should not have a harmful effect on the human body

Thus, the best profiles, according to GOST 30673, are:

PVC window profiles of any brand with a thickness of the outer front wall from 2.7 mm with a heat transfer resistance of more than 0.8 m 2 ° C / W

They are required to meet other quality criteria in accordance with GOST.

PVC window profile quality according to European standard

To determine the best profiles in Europe, the European standard EN 12608: 2003 is applied.

European standard EN 12608: 2003 "Polyvinyl chloride (PVC-U) profiles without plasticizer for the manufacture of window frames and doors. Classification, technical requirements and test methods" also has the status of a German DIN standard. The requirements of the standard are applicable for countries: Belgium, Denmark, Germany, Finland, France, Greece, Ireland, Iceland, Italy, Luxembourg, Malta, Netherlands, Norway, Austria, Portugal, Sweden, Switzerland, Slovakia, Spain, Czech Republic, Hungary and the United States. Kingdom of Great Britain.

The European standard EN 12608: 2003 has much in common with the Russian GOST 30673, since the domestic standard is an edited version of the European one.

A distinctive feature of the European standard is the division of the profile class into two different climatic zones "M" (zone of temperate climate) and "S" (zone of hot climate).

Profiles designed for hot climates (S) can also be used in temperate climates (M). In countries where both climates exist, profiles intended for operation in a temperate climate zone (M) should not be used in a hot climate zone (S).

The classification of the main profiles according to their impact resistance, determined using a falling striker at a temperature of -10 ° C, is also associated with a significant difference in climate. Profiles of 1 and 2 classes are distinguished.

EN 12608: Class of PVC window profiles for the thickness of the outer front walls

• Class A - greater than or equal to 2.8 mm
• Class B - greater than or equal to 2.5 mm
• Class C - not standardized

It can be assumed that the thickness of the outer wall of the PVC profile is 3 mm, perhaps the most important characteristic of a PVC window, although the European standard says that this should not be understood so.

How to determine a quality PVC profile by its appearance

In the finished window, only the appearance of the profile remains the only method for determining its quality. It is a rare necessity to carry out an examination, disassemble and cut a PVC window frame to check its class. It is much easier to find out the quality by inspection.

So how to determine the quality "by eye".

Manufacturer marking

The film has a PVC profile mark applied by the manufacturer. The protective film covers the main surface of the PVC profile at the stages: from manufacturing to installation in the opening. To avoid damage, the film must be removed immediately after installation. Under the influence of sunlight, the adhesive layer of the protective film will be absorbed into the deep layers of the profile and spoil it. Also, the brand is indicated on the profile itself in the form of laser-engraved numbers and letters.

Uniformity and smoothness of the PVC profile under the film

Homogeneous, even, uniform and smooth surface - the criterion for the quality of the window and profile. The presence of inhomogeneities, deformations or other defects noticeable to the eye on straight and flat sections of the profile may indicate poor quality.

Window frame sealant - shape, type, color

The seal is one of the most important profile elements. A poor-quality seal will not protect against moisture and drafts. Pay attention to its elasticity and absence of damage. The presence of the third sealing circuit does not significantly affect the frost protection, but protects the fittings from the aggressive external environment. Color - does not affect quality. White, black, gray and caramel color of the seal will protect the window equally well. Seals made of EPDM rubber have a more elastic feel and are inserted with separate cords (unlike co-extruded TEP seals).

Frame box width
The thicker window frame, the higher the thermal insulation properties it will have. The number of cavities in the PVC profile - chambers - also affects the characteristics. More cameras, a warmer profile. However, you will not see the profile camera externally. The 70 mm profile can have 3, 4 or 5 chambers.

The chambers in the profile are counted not by the total number of cavities separated by partitions, but by the number of chambers on the way from the outer (street) wall to the inner (room) wall.

Sales volume of plastic windows by PVC profile brand

Among the plastic profiles for windows there are their own "Mercedes" and their "Lada". There are budget options for profiles and exclusive, luxury lines of PVC profiles. At the same time, most often, expensive and cheap profiles are sold under one brand.

Profiles of German brands REHAU, VEKA, KBE, Deceuninck are in the greatest demand. However, this does not mean the poor quality of domestic profile systems or other PVC profiles, which are abundant on the market.

Profine is the company that owns the KBE brand, along with TROCAL and Kommerling.

In Germany, plastic windows first appeared in the middle of the 20th century. The popularity of plastic windows in Germany and the growing interest in them in other countries contributed to the opening of production facilities of German companies, including in Russia.

Three most popular PVC profile manufacturers have subsidiaries in the Russian Federation: Rehau, Veka, Profine (owns the brands KBE, Trokal, Kemerling). The dominance of German companies in the production and sale of PVC window profiles is a merit of effective development and its expansion.

Relying on the popularity of the brand, however, you can get into a situation where preference will be given in favor of a lower quality product - since profiles of different classes are produced under the same brand.

1 ... To choose the best PVC profile for a window, compare profiles of the same weight category.

Traditionally, profiles are divided into three main groups:

There are also special profile systems that cannot be directly compared for this gradation. For example, there are three-chamber PVC profiles with an installation depth of 70 mm, or 100 mm (or more) systems with 4 chambers.

2. It is correct to compare PVC profiles by physical and technical parameters in the certificate of conformity.

For use on the territory of the state, PVC profiles must pass a certification system and receive their quality class based on test results. Detailed results appear in the annex to the certificate of conformity for a specific system (PVC profile of a specific model).

3. It is correct to compare not only the PVC profile itself, but also to know the manufacturer: what materials are used in the window in addition to the PVC profile.

The best windows are produced by an experienced manufacturer using quality and proven components.

Often, even the best profile can be spoiled by unreliable thin-walled reinforcement, poor-quality welding, or poorly assembled structure at the factory.

Pay attention to fittings, double-glazed windows and other structural elements.

4. Trust the installation to professionals. The quality of installation ultimately determines how long and how well the window will work.

It is better to entrust the installation to an experienced team of installers or a specific specialist.

It is not worth paying for a quality product if unskilled workers will do the installation. The installation scheme itself and the stages of its implementation are also described by regulatory documents. For example, the installation of windows in accordance with GOST and the installation of plastic windows in a wooden house differ in stages and preparation.

1
2
3
4
5		High product quality
6		Best price
7		Reputable Russian company. Good performance
8		Best product quality
9
10

Plastic windows are a modern solution for glazing residential, commercial and industrial premises. They are distinguished by their unpretentious operation, can be made taking into account the individual needs of the customer (from size to color) and in comparison with wooden windows have a more affordable price tag.

The review presents the best manufacturers operating in the Russian market of plastic windows. The rating includes both world-renowned brands and domestic companies that use the profile of the most popular brands in their production. The rating given is based on the quality characteristics of the windows being manufactured, as well as reviews of the owners who have chosen the products of a certain company for glazing a house or apartment.

The most popular manufacturers of plastic windows

5 Trocal

The most experienced PVC window manufacturer
Country: Germany
Rating (2019): 4.9

According to the sources, Trocal's activities began back in 1954 - it was then that the production lines (it is not known what scale) began to work for the benefit of creating the first PVC profiles. Honoring their traditions, the Germans to this day produce designs that are successfully used for installation in apartments and private houses.

The problems and main advantages of the Trocal profiles are in the chosen way of uniqueness. The manufacturer relied on increasing the reliability of the structure by increasing the rigidity and resistance to all kinds of deformations. If in the case of windows this approach was crowned with good results, then for doors the reinforced profiles turned out to be too heavy. In terms of design, users were more than satisfied: absolutely the entire line of the company is not devoid of design sophistication, which, in general, is a rarity even for well-deserved market leaders. In general, the level of the company is very high: it is good both in terms of key product characteristics and in terms of cost. An unambiguous contender for the highest position.

4 Salamander

High build quality
Country: Germany
Rating (2019): 4.9

One step away from the prestigious troika, another German brand stopped, which produces perhaps the best window profiles in the world. The personal "curse" of Salamander is status. Due to the fact that they belong to the truly premium layers of manufacturers, the cost of their products goes far beyond the field of action of competitors, which, of course, negatively affects the attraction of a mass customer.

The second negative aspect is ... the clone companies. Huge prices set a precedent for copies of windows of a well-known German company to be stamped in an artisanal way and “merge” into the market in pursuit of the same colossal figures. The precedent is unpleasant and does not play into the hands of the brand at all. But, be that as it may, Salamander continues to go on the intended course and offers the segment more and more innovative developments.

3 Rehau

High-tech production. The most "advanced" brand
Country: Germany / Russia
Rating (2019): 4.9

The third is the permanent competitor of KBE and VEKA, which has won the hearts of consumers (and experts) by being sharpened in a constant search for the ideal profile formula. In the laboratories of REHAU, development and testing of prototypes is carried out day after day, only a small part of which is honored to appear in the store's catalog.

The process of making plastic windows is also notable for its severity. With true German pedantry and punctuality, each technological operation is accompanied by a process of strict control. Thanks to this approach, the Germans were able to significantly reduce the percentage of rejects and reduce the cost of recycling unusable products. But, like all other companies, REHAU also had a disadvantage. Despite the fact that in general the number of consumers is large, some are deterred by the company's pricing policy. Yes, they manage to reduce internal costs, but they are in no hurry to meet new customers (in terms of the cost of finished products).

2 KBE

Customer orientation. The most affordable prices
Country: Germany / Russia
Rating (2019): 4.9

The second contender for leadership is another German representative in the production of PVC profiles, who has earned such a high place due to its total customer orientation. The assortment of the company contains a huge variety of window profiles suitable for both southern and northern regions of a large country, and their cost is a good example for competitors (and, at the same time, the most important advantage of the company, along with the highest quality). By the way, the quality concerns not only the profiles, but also all the accessories accompanying them.

The disadvantage of KBE is prosaic and requires some kind of parallelism. The fact is that German products (produced directly in Germany) are reference. But at the windows produced at Russian factories, there is a blemish in the form of a gradual yellowing of plastic, which some users did not hesitate to point out.

More recently, a plastic window in a house was akin to "know-how" that came far from abroad. Today this thing has become so commonplace that already wooden frames look like a rare curiosity, irrevocably giving way to "eternal" plastic. But which is better: a carpentry product or conveyor technology? What are their advantages and disadvantages? Find out from the detailed comparison table:

Window type	pros	Minuses
Wooden window	Environmental friendliness Excellent decorative properties Easy process of repairing chips and small cracks Protection against the destructive influence of the environment is provided by impregnations and varnishes Good dustproof performance Excellent heat and sound insulation Low dependence on fittings (optionally, you can "embed" any lock or handle)	- The need to periodically update the protective coating - Specific cleaning process - Models without a sealing loop require additional insulation during cold weather
Plasticwindow	Good noise and heat insulation properties Aesthetic and modern appearance Unpretentious cleaning No need for protective coatings Technological fittings that provide several options for opening the window / vents Maintainability Long service life	- Surface defects are very difficult (almost impossible) to restore with improvised means - Dependence on fittings (up to a specific series or type) - If installed incorrectly, they do not provide reliable protection (from freezing in winter and dust in summer), which is "cured" only by re-installation

1 VEKA

The best range of products. The optimum ratio of price and quality
Country: Germany / Russia
Rating (2019): 5.0

A German brand that actively and successfully retains the largest segment of the domestic consumer audience for its products. VEKA entered the Russian market in 1999 and in such a short period of time managed to win a number of significant victories. The open branch of VEKA Rus became the first in Russia to receive a certificate of compliance with the European quality standards RAL - a mark that none of the company's closest competitors has.

In addition, due to the full technical equipment of the production lines of the factories, the company refused to release a low-grade product, shifting all its attention to the production of A-class profiles. This means that all models of window profiles (of which there are six in VEKA) have a high degree of protection against external factors environment and are suitable for use in all climatic conditions.

The best manufacturers of plastic windows of medium and premium class

5 LG Chem

Best oriental supplier of plastic windows
Country: South Korea
Rating (2019): 4.7

The only representative of the eastern branch of the production of plastic windows, which relies on the distribution of goods in the eastern part of Russia. Needless to say: due to the close location, the main consumers of PVC profiles are residents of the Far East (and only a small part of the windows reaches the rest of the large state). This fact largely predetermined the fact that the main characteristics of the product have not yet bothered to deeper analysis and study.

Based on user reviews, we can conclude that LG Chem windows (in all their variety) have good insulating characteristics and are made of high quality glossy plastic. True, the latter often acts as the initiator of problems - if the gloss is damaged, it is not so easy to give its former appearance. As for the price, in comparison with competitors, it is low and, in general, looks good against the background of high quality.

4 Facro

The best windows for the attic of the house
Country: Poland
Rating (2019): 4.7

The Polish manufacturer of plastic windows Facro, thanks to the introduction of innovative technologies and the highest quality products, has earned the trust of consumers and has become the world leader in the roof window market. The main principles that the company is guided by are environmental friendliness, safety and reliability of the window. That is why the selection of raw materials and the production process as a whole is carried out under strict control.

Due to the fact that all products are tested in boxes where various natural phenomena and climatic zones are simulated, plastic windows of this brand have the best characteristics and wear resistance, and are suitable for installation in regions with even the most severe weather conditions. A wide range of windows and high-quality, individualized fittings allow you to choose a unique solution for the attic of the house. In addition, all windows from this manufacturer are equipped with the TopSafe system, which increases resistance to burglary and damage. The products of this company are out of competition, and deserve only positive feedback from users.

3 Plafen

Premium manufacturer
Country: Austria / Russia
Rating (2019): 4.8

Extra-level PVC profiles, the installation of which will satisfy even the most picky buyer. The Plafen assortment includes five model lines, designated by the letters S, T, E, L, C. The main feature is the stylization of profiles under the wood of different varieties, which gives a more expensive look and suits any interior. According to the official website of the company, the minimum lifespan of a window is over 60 years without any serious damage or flaws. In general, the comments of the owners fully confirm such a serious statement by the manufacturers: with good installation, there are no drafts and freezing.

Of course, there were some drawbacks. High-quality windows simply could not help but acquire a solid price tag, which only a small part of consumers could “pull”. And the company itself positions itself as a reliable supplier of windows for business, which also scares away ordinary potential buyers.

2 Proplex

Optimal ratio of quality and cost
Country: Austria / Russia
Rating (2019): 4.8

One of the few trademarks of Austrian / Russian origin, distinguished by democratic prices and full adaptation to climatic conditions country. The Proplex asset can include the excellent quality of PVC, which is not prone to yellowing and has a high level of strength. This fact is often enough for consumers - people are happy to purchase windows for installation both in private houses and in apartments. The only problem is that the brand's assortment contains models, the appearance of which smacks of weariness and obsolescence. These are much cheaper than new developments, but show no less convincing results in all operational parameters.

The second problem of Proplex (much more global) is associated with the scale of the network - the lack of a certificate of compliance with international standards greatly prevents the company from going beyond the Russian market.

1 Deceuninck

The standard of the world quality standard
Country: Belgium / Russia
Rating (2019): 4.9

The Belgian concern, whose world fame is far ahead of the fame among Russian consumers. According to authoritative sources, The Deceuninck Group has consistently ranked among the world's leading manufacturers of PVC windows.

As for the Russian branch, the most significant contribution to the common cause of the company was the receipt of the prestigious award for the creation of the “Favorite Space” profile system. Of the obvious advantages, the fact that all window options have a certificate of compliance with international standards should be highlighted. But this plus negatively affected the price level, "thanks" to which a relatively small audience resorts to installing Deceuninck windows. If we talk about cheap models, then they are frankly worse than similar products of opponents, both in terms of quality and in general appearance. Thus, a world-renowned firm can be content with only getting into the TOP 15 of the best, and not a hint of leadership.

The best Russian manufacturers of plastic windows

10 Kaleva

The only Russian full-cycle company
Country Russia
Rating (2019): 4.5

Kaleva is a Russian company with a by no means Russian name, operating on a full cycle basis. This approach involves carrying out the product from the moment of its design to installation according to the customer's order. A rare case, especially among domestic manufacturers. Nevertheless, even in this field of activity, serious questions arose for the company.

Basically, the company is let down by dealerships, of which there are at least eight dozen. According to customers, the organization of the installation process in some cities is extremely poor and requires subsequent dismantling and re-replacement. With all the quality of PVC profiles in such a situation, they will be pursued by an inevitable loss of performance. By the way, the head office does not bother, but delegates the solution of problems with dealers to the clients themselves. Not the most professional approach, but there is hope that further action will be taken.

9 Plastic windows

Modern design solutions
Country Russia
Rating (2019): 4.6

The company "Window Plastic" is one of the successfully developing companies for the manufacture and sale of plastic windows. Our own production, equipped with high-precision and modern equipment, allows us to increase the volume of products, which, moreover, are distinguished by quality and better geometric shapes. The pride of the company is the ability to satisfy any design decisions, both in terms of configuration and in terms of color. Competitive prices for PVC products from the manufacturer "Window Plastic" allow us to make this product available for any house or apartment.

In addition to standard solutions for the installation of window systems, this company carries out glazing of houses with passive heating. The use of components from global manufacturers in the assembly guarantees maximum comfort, reliability and safety during the operation of the plastic windows of this company.

8 Breathing Window Factory

Best product quality
Country Russia
Rating (2019): 4.6

The brand "Factory of Breathing Windows" appeared on the domestic market in 2006, and today it is the largest manufacturer of plastic windows in the south of Russia. The company's plant is equipped with the most modern high-precision equipment, and the latest technologies are used in the process. Employees of the enterprise are highly qualified specialists and regularly attend refresher courses, including abroad. For the plastic windows of this company, only high-quality European-made components and the Rehau profile are used. This guarantees high quality products and thus has a positive effect on the company's reputation.

This manufacturer offers the most daring and extraordinary design solutions of high complexity. You can order a window for your home almost anywhere in the region, and after installation, the "Factory of Breathing Windows" company guarantees free service support for 7 years. Using the services of this company, consumers in the reviews note the professionalism of the staff and the best technical characteristics of the products.

7 Panorama

The firm from St. Petersburg is not very popular, although it has existed on the domestic market for over 20 years. It would seem that there are not many prerequisites for this. According to consumers, the company's PVC profiles are of good quality and, in general, deserve to be, if not in the TOP-3, then certainly in the top five. They have an optimal balance of stiffness, provide good insulation (in particular the five- and six-chamber profiles Enwin Waiz 70 and Deceuninck Favorit Space), and also have a pleasant appearance. In addition, the cost for all models (at least the standard ones) is within the market average.

The reason for the low popularity of Panorama lies in its approach to customer service. According to experts, the company's service is not distinguished by quickness and intrusiveness ... to such an extent that information about all the options has to be pulled, as they say, "by the thread."

6 World of Windows

Best price
Country Russia
Rating (2019): 4.7

Founded in 2001, in Belgorod, a small enterprise for the production of PVC windows "Mir Okon", by 2008 has become one of the largest manufacturers in Russia using the KBE profile. The most automated workflow allows the company to carry out large volumes of up to 750 finished products per shift. Moreover, all equipment for the plant was purchased from well-known German and Italian suppliers. State-of-the-art production lines guarantee the highest product quality and minimize the potential for rejects.

When choosing plastic windows for a private house or apartment, the price plays an important role, therefore the windows of this manufacturer are popular with the consumer, who, moreover, in their reviews note the high quality of the product and the coherence in the work of the company's divisions. A variety of all kinds of configurations in the manufacture of windows, will satisfy any client's request.

5 Glassland

High product quality
Country Russia
Rating (2019): 4.7

Winner of the most prestigious award in the window industry "Golden Window" on the basis of two recent years, the firm "Steklandia" is respected by consumers. The brand was founded in 2001, and the basis of its strategy from the very beginning of its existence was the production of only high-quality PVC structures. For this purpose, high-tech European equipment was purchased, and the employees were trained at the leading window factories in Europe. Double-glazed windows are manufactured on an automated line of the LISEC company, and PVC products - on the HAFFNER line. Thanks to quality control, the company's products have won trust and are always popular with consumers.

When choosing a plastic window for an apartment or house, the main criteria are the price, appearance and performance characteristics, which have an optimal ratio in the products of the Steklandiya brand. The already large assortment was expanded with products from the Trocal premium profile, which made it possible to satisfy the most diverse customer needs.

4 Rusokon

Integrated burglar-proof window system
Country Russia
Rating (2019): 4.7

For more than 10 years the company "Rusokon" has been presenting plastic windows on the domestic market self-made, and also provides all related services for their installation. The company is one of the 20 best manufacturers of PVC structures in Russia, offering the consumer only the most modern windows of the new generation. This product, thanks to new technological solutions, has improved characteristics of energy saving and sound insulation. They also have an anti-burglary system that is able to protect an apartment or house from unauthorized entry, and the basic set of accessories has been expanded.

The firm "Rusokon" carries out the production of profiles according to an improved recipe that meets GOST and international requirements in terms of environmental friendliness. At the same time, plastic windows of this brand are distinguished by an affordable price and are represented by a wide variety of design options. The company is especially proud of its participation in such popular television projects as the Housing Issue and the School of Repair.

3 Russian windows

Best Breeder of Custom Designs
Country Russia
Rating (2019): 4.8

Having started its history in 1996, the company "Russian Windows" was a small workshop for the production of PVC structures, which eventually turned into a large regional manufacturer. In 2006, the company completely modernized the line, which made it possible to significantly expand the range of products offered and improve its quality characteristics. The adjustment of sophisticated and modern equipment supplied to the plant from such leading manufacturers as Bavelloni, Urban and Bystronic was carried out by highly qualified specialists from the EU who have access to perform this type of work. Also, lines were launched that allow PVC lamination and the manufacture of structures with atypical character and dimensions.
Plastic windows, doors and other products for repair and construction, manufactured by "Russian Windows", are subject to strict quality control at all stages of production. This guarantees the absence of defects and the highest quality of the final product. Thanks to this approach, the company was awarded the Consumer Confidence award in 2013 at the All-Russian competition of manufacturers. Today "Russian Windows" offer the widest range of products, while guaranteeing timely delivery and installation, which is confirmed in their reviews by consumers who are completely satisfied with the quality of service.

2 Labrador

The most high-tech manufacturer
Country Russia
Rating (2019): 4.9

Firm "Labrador" is the most large manufacturer metal-plastic (PVC) and aluminum windows in St. Petersburg, and one of the most high-tech in Russia. The production process is fully automated - modern equipment is installed at the plant, which makes it possible to produce seamless windows with a more attractive appearance. The partnership with VEKA guarantees the high quality of the profile used in the production of windows.

The company's products meet all quality standards and are regularly certified. Plastic windows of the Labrador brand are distinguished by a competitive price, while, in terms of sound and thermal insulation, they significantly surpass some analogues. The company also offers installation services in accordance with GOST and free warranty service for 10 years. In their reviews, users positively note the presence of climate-controlled double-glazed windows, affordable prices and good service.

1 Montblanc

Optimal balance of performance
Country Russia
Rating (2019): 4.9

Montblanc is a subsidiary of the STL-Extrusion concern, which has risen markedly over more than ten years in the market. Its main asset was the development of an extensive dealer network, thanks to which the brand acquired a solid customer base. Not the same as the German brands, but still quite decent.

From the point of view of advantages / disadvantages, the company has a strikingly one-sided positive balance - only the absence of an ISO certificate of conformity at factories located in Russia can be recorded as a liability. Otherwise, there is a complete idyll: both in terms of the quality of windows, and in terms of accessories (provided by partner factories), and in terms of durability. Montblanc currently has seven profile types, each with a unique set of chambers and widths for different climates. A good and inexpensive option for glazing houses and apartments.

How to choose the best plastic windows?

The main obstacle on the way to choosing the right plastic window for a house and apartment is the fact that there are many different profiles. But the difficulties of buyers are associated not only with them - any window has many nuances that can dramatically affect performance. Therefore, in the process of choosing "Quality Mark", it is recommended to pay attention to the following aspects:

Profile type. According to well-known standards, window profiles are divided into three groups: blind, pivoting and tilt-and-turn. The former will be suitable if installed on large areas that do not require ventilation. The rest of the options, on the contrary, are best purchased in small, ventilated rooms.

Number of cameras. Here you should be guided by the following principle: the more cameras a window has, the warmer it will be in the room. Choose the number of double-glazed windows according to climatic conditions: from three for severe winters, and less if you live in warm regions of the country.

Glass. Recently, manufacturers have moved away from using ordinary glass, replacing it with low-emission, enriched with silver atoms, samples (even safer, even newer). It is very simple to check this: a lighted match in the case of "emission" glass will give not a red, but a violet glow.

Fittings. An element that we recommend not to save on. Whatever the frame (it's a profile), the main consumable of plastic windows is the hardware (handles, locks and combined awnings).

Manufacturer. Advice, last in order, but most important in terms of importance. Pre-selection of the manufacturer will give you the opportunity to look at something in the range, as well as find out the approximate cost of the order. We strongly recommend taking a closer look at the TOP-15 nominees.