For the design of the garden near the cottage, various combinations of crops, colors and fences can be applied. For processing beds use all sorts of primary means and materials. For example, it is very interesting to fencing for beds from a plastic board. Similar structures have a number of their advantages, and the main of them is low price and beautiful appearance.

Pluses of plastic beds for beds

Until recently, a natural board was the most commonly used material for the design of native beds. Its indisputable plus is the naturalness and practicality of use. But unfortunately, a lot of time this board will not last, and after some period it rotches. Therefore, it makes sense to consider the option, how to make a garden garden from plastic panels.

Plastic is very durable and practical material, and this allows you to create many diverse forms and modifications in the design of the furniture bed. The indisputable plus of plastic design is the simplicity of installation with which any dacket can cope, including women.

Designs for the fence of the Giber PVC panels have many different types and are presented in a very large assortment. Similar products made of plastic are more common among dachensons for the fence of the beds than, for example, a wooden framing. They acquired such popularity not only due to low cost, but also due to practicality in the use, durability and many other advantages that are not in wooden and stone models.

It is important to note that the PVC board is capable of 100 percent to hold water that has fallen into the design of the bed fencing. Plastic products also have a large number of Additional advantages that have already rated many dachensors.

The advantages of plastic fences can be considered:

Varieties of fences

Plastic products for beds are made from a special material.which even when heated does not emit harmful substances into the soil, so the owners can be confident in the ecology of cultivated crops, vegetables and fruits, flowers, and so on. Besides modern models There are also improved characteristics.

Such fences allow you to purchase an environmentally friendly material area. It is not modified under the influence of moisture and sun rays. The design will never crack from the frost and is not melted under the sun, so you can use such devices in any climatic belts of the world.

But this is not all the advantages that artificial material has. It will never spoil insects, in contrast to the tree, which can eventually crumble over time. Such material is also not subjected to rotting and corrosion, spread of mold, etc.

High beds from plastic panels can be made without much effort, the main thing is to purchase plastic. A huge amount of such material on the market, and it has many diverse variations. Basically distinguish four main types of plastic products:

• plastic border tape;
• garden constructor - practical products;
• PVC panels;
• plastic mesh fence.

Some structures look like natural materials and successfully imitate them. For example, there are options that imitate wood and stone, and deprived of all flaws.

Features Ribbon for Bordeur

The plastic fence is very often used to fencing the perimeter of the site, beds, flower, etc. Since the material has high flexibility, its use allows you to create an outline and forms of the desired type. On the market you can find border ribbons whose height can be from 10 to 50 centimeters. Such sizes will be enough to make several raised beds in the territory.

In such structures, the Earth does not scatter when watering or during precipitation. At the same time, the roots of the plants will be well protected from the influence of water.

If the project is required to take large square On the beds, as well as to reduce the places of growth of other cultures, then the right decision will be to buy broad ribbons for flower beds and flower beds, and for other purposes it is better to establish non-fragile designs.

Even without special practices in this area can establish a similar tape. With such a task, any owner of the garden can cope. Included must always be detailed instructions Assembly, as well as additionally a set of fasteners.

To install, you first need to beat the bed with a small moat. Then the trench need to pull the tape, and it is desirable that two people do this work. When the tape stands still in the trench, it should be equipped with spicy for fixing. Then it only remains to fill the entire shape of the earth and press well. For wholeness, the design is required to be copped with brackets. She can fulfill his direct purpose for several years. If there is a need, the plastic elements can be dismantled or rearranged into any other place.

Many owners of country sites prefer flexible border versions of products. Such ribbons can create unique designs and forms. They are very well suited to form a curved configuration. Especially since their cost is low, and a large selection of material allows you to make any designs. And if you make every side of a border of different colors, it will look like it will be bright and spectacular.

To get a relaxed atmosphere on the bed should be used dark colors plastic. And to underline a certain detail, you need to install bright shades, for example, yellow or red.

Garden constructor

The most popular type of design for the garden, flower beds and land plots are a garden designer. Because of its elasticity, such a device makes it possible to make unique aesthetic forms, flower beds and beds of any size near the house on the garden - and small and large. Such a design consists of plastic parts that are fastened in a certain way. Basically, the manufacturer provides the instruction in which the entire process is described.

As a result, you can collect a single design with solid sides, into which the soil is embanked and a garden is formed. The main advantage of such models is their versatility. The garden designer can create both large and small buildings, in contrast to the garden board. She holds the land very well within the garden, and also does not miss moisture.

Such structures are very small, so there are no restrictions on the type of soils, etc. They can be installed on the ground with loose and bulk ground. Garden constructors are also actively used to install multiple bed tiers. To form a special type, plastic panels can be bent or shifted relative to each other.

The installation itself is not a complex process. It is enough just to fold all the elements among themselves, connect fasteners from the kit and install at the required place.

Options for framing from PVC panels

In addition to the classic options for plastic fences, there are many other non-standard designs and forms of structures. For example, the design with the imitation of stones can be made a garden labyrinth and apply for various purposes, for example, for fencing:

Such designs have special protrusions and recesses from below, due to which you can easily mow the grass near them. The fences prevent the breeding of weeds near the flower beds, have aesthetic appearance, do not catch up and easily spread to the ground. Basically, such structures have several elements whose height ranges about 8 centimeters, and the total length is about 3 meters.

There are other imitation options:

• brick;
• metal fence;
• fence from the vine;
• forged fences;
• in the form of plastic flowers, etc.

Polymer

Classic plastic structures are not the only material that is used in the construction of a bed near the cottage. Many owners country houses And land plots were increasingly started using wood-polymer composite (DPK).

Prefabricated designs have several important advantages:

Groans from DPK-panels are well carried out heat, their color resembles natural wood, as well as a natural wood texture. Nevertheless, such material is not ideal and has its own minuses. If it is in contact with moisture for a long time, it can start to absorb it, and with time the mold will appear. Products advise to process special substances so that over time they have not begun to collapse under the influence of ultraviolet.

As can be seen, plastics designs for beds can be diverse. There are craftsmen who make homemade fences from plastic bottles. This option will be free, but not so beautiful as purchased special panels.

From this article, you can find out the features of such products as beds from a plastic board: scope of application, pluses and cons of structures made on their basis, varieties of plastic fences, as well as their technical and operational characteristics. The reader will get acquainted with the specifics of plastic panels, borders, ribbons, designer products, as well as fences made of wood-polymer composite.

Fencing designs for beds in finished form are presented in the market in an extensive range. Plastic products are the most common and in demand among the owners of country sites. Such success is due not only to low cost, but also practicality, the durability of these structures, as well as many additional advantages, at the expense of which they won in comparison with wood, metal or stone.

One of the main advantages of plastic is its low cost

Note! The plaque from polyvinyl chloride (PVC) is capable of 100% the moisture obtained by the soil during watering or rain, inside the design.

Why buy plastic fences for flower beds and beds

Plastic products are characterized by versatility and mass of advantages, which are appreciated by many dackets.

Advantages of plastic products:

• practicality - products have a small weight, which allows them to use them even on the bulk soil. Over the garden, made of a solid plastic board, can be pouring a sufficiently high soil layer. If necessary, the size parameters of the frames, in particular height, can be increased by adding additional parts;
• aesthetics and a wide selection of design - Buyers are available various options borders or plastic fences, on the basis of which you can create a bed of unusual curved forms;

• resistance - plastic products are not subject to negative impact of corrosion, they are preserved at an initial form over the years, without reacting to moisture and other negative environmental factors;
• the ability to maintain color for a long time - products made of high-quality atmospheric plastic are not burned in the sun. Even under conditions of prolonged exposure to ultraviolet rays, plastic elements will retain their original color and shape;
• extensive application scope - a rich assortment of products with different configuration and coloring allows you to support any exterior of the house and create a unique in the courtyard landscape design. Plastic structures are used to zoning the yard, forming decorative fences to highlight the bed or paving track, as well as for focusing on individual objects;

• simple installation system - installation and dismantling does not cause absolutely no difficulties, and the designs themselves are mobile and can be used repeatedly.

Varieties of garden fences for flower beds and plastic beds

Plastic designs of the beds are made of a special material that does not release toxic substances in the soil even when heated. Modern products have improved characteristics. Due to this, the owner of the site can buy fences for garden beds that are not terrible high or low temperatures.

Note! Under the influence of frost designs are not covered with cracks, and the straight sunlights are not able to melt them. Therefore, beds from plastic can be used in any climatic conditionswithout fear that they ruin.

Artificial origin of the material is also associated with some benefits. First, insects cannot damage products, as they do not attract them. Secondly, plastic is not subject to such processes as rotting or corrosion. Thirdly, the material does not have comfortable conditions For the development of mold.

You can buy plastic beds for cottages in any specialized store, the market offer includes several product categories:

• border tape of plastic;
• flexible fences, called garden designer;
• panels "Garden board" from polyvinyl chloride;
• fencing in the form of a plastic grid.

There are many variations of plastic fences for beds for sale, to buy these varieties of products can be used any color and size. Some types of structures realistically imitate natural materials, such as wood or stone, without at the same time their shortcomings.

Features of plastic borders for tribes in the form of a ribbon

Plastic fencing in the form of a ribbon is widely used by dackets for organizing a garden and flower in the site. Due to the flexibility of the product material allow you to create structures with outlines of various shapes. On sale are presented, the width of which varies in the range of 0.1-0.5 m. This height is enough to break the raised beds in the territory.

The plastic tape protects the mound from the blur by water when watering the garden is carried out or rain rains fall out. In such conditions root system Plants will remain in their places, it is reliably protected from damage to flows.

Helpful advice! If the site is required to limit the growth of bushes, for these purposes it is recommended to buy a plastic border for a large width beds, for zoning lawns, organizations of flower beds and decorative gardens, as well as the formation of bulk paths more expedient to use narrow tapes.

The process of mounting the border tape does not require experience or special skills. With this task, any dacket will cope with this task. Included with the product supplied manual of the manufacturer with detailed description Procedures and set of stakes for fixing the border. To set the ribbon, it is enough to dig around the perimeter of the future bed, a trench of a small depth. Then the tape should be pulled, it is desirable that this manipulation performs two people.

After the tape is placed in the trench, the stakes are installed on the sides, which will fix it in the desired position. It will only be left to fill the land ditch and carefully tumble it. In order for the design of the garden to be solid, it is necessary to connect the edges of the tape with brackets with a stapler. Such a garden is able to serve for several years. If necessary, it can be easily obtained from the ground and transfer to another place.

What can I buy fences for beds in the form of tapes: features of the range and rates

Designers of the landscape and owners of country sites prefer the border ribbons for the reason that this type of product has increased flexibility. Based plastic borders You can create unusual flowerbeds and beds of a bizarre form, the ribbons are perfect for the formation of curved lines. The price of the material is low, and the extensive range opens up new opportunities for design.

By purchasing ribbons of different widths, you can create multi-tiers or flower beds on the site, which, thanks to their decorativeness and compactness, use high demand for dacities. Products of various colors are on sale. The multi-tiered design of the bed will look more spectacular if the sides of each tier will have a different shade.

Middle rates on border ribbon:

Helpful advice! To create a relaxed atmosphere on the site, it is recommended to use the tapes of dark colors. For the placement of accents around certain objects it is better to use bright borders, such as orange, yellow, red.

Plastic boards beds: product specificity

Despite the fact that the curb ribbon has many favorable properties, it is unable to become an alternative to the hard fence. The design of the beds from PVC panels can withstand a large soil pressure, a random gift of the shovel or other garden tools during the treatment of the garden. This type of product is called "Garden Board".

Externally, it looks like panels. Their length can vary, but the maximum limit of this indicator is 3 m. Board width - no more than 15 cm. In the end parts of the boards there are fasteners and groove recesses that significantly simplify and speed up the process of assembling the beds. Due to this system, you can create structures of any size.

The assembly of beds from plastic boards is carried out with the instructions of the manufacturer. A set of products, in addition to panels, includes stakes made of plastic. To construct a bed to make enough board boards with a protruding attachment and groove grooves. After assembly, the product is installed on the ground and is fixed at the expense of plastic stakes that are driven into the ground. At the end of this process, decorative plugs are installed at the fasteners, so that the earth does not fall into these holes.

At what price you can buy ready-made beds from plastic for the garden and how to apply them

Plastic boards are used for the construction of floral flower beds and beds on the household plot. In addition, this type of product can be applied to the improvement of the local area, protecting the sandbox on the playground, a zone intended for recreation, lawns and other objects. Panels are characterized by high strength. The surface of products is smooth.

Sets of fences for beds from plastic panels can be used in the finished form. Manufacturers offer dozens of coloring, so the summer residents have the opportunity to create interesting compositions. Products are not afraid of temperature differences and prevent the soil erosion. Only high cost can be attributed to the disadvantages of such beds.

Note! Plastic garden board can be used as a fencing for greenhouses and greenhouses. The panels are suitable for installing the framework and are able to withstand the load of the entire design.

Middle rates for beds from plastic panels:

Garden constructor

Garden constructor is one of the varieties of fences for beds made of plastic. This type of product makes it possible to show a fantasy and build a beautiful decorative garden or flower bed on the summer cottage, and completely any sizes and shapes. The garden designer is a set of plastic parts that are connected in a certain way. As a rule, the manufacturer's instructions that are in each package describes in detail the entire process.

As a result of the assembly, a one-piece structure is obtained in the form of a side, which is used to form a bed and fixing the soil. The main advantage of the garden designer is its versatility. Unlike the garden board, the elements of the designer allow you to create on the site both large and small fence depending on the needs of the owner. The finished design perfectly keeps the soil within the bed, as well as moisture, required plants for development.

Note! Products have a lightweight weight, so there are no restrictions on the state of the soil. Such beds can be installed on areas with loose or bulk soil.

The garden designer is successfully used to create multi-tiered structures. To give a garden or flowerbed an unusual appearance, you can form curved lines or achieve asymmetry for forms (for this it is enough to shift tiers relative to each other). Installation process is extremely simple: enough to buy plastic Grokes In the required quantity, connect the part with the fastener and install on the site.

Article on the topic:

Interesting ideas for registration cottage plot and greenhouses. Using healthy materials to create an unusual design Grookok.

Price of the Garden Designer for Groakers:

Unusual options for fences for beds from plastic panels

In addition to standard plastic fences, there are many product options with unusual design. For example, a garden labyrinth consists of plastic elements that imitate real stones. Products have a gray coloring. Despite its ease, this plastic fence has durability and resistance to negative weather factors.

A garden labyrinth has an extensive scope of application, it is used to zoning various objects on the site:

• flowerbeds;
• beds;
• and decorative reservoirs (ponds);
• flower beds;
• tracks;
• landscape design elements;
• lawns.

The border-labyrinth looks restrained and not striking, it will optimally fit into the space of any country area. Sections made of plastic are easily deepened in the soil. Most often, the kit consists of several elements. Their height is 0.08 m, and the total length of the set is 3 m.

Note! The garden labyrinth has a special protrusion and notches, thanks to which it can be without interference to mock the grass in bed. At the same time, all vegetation on the border of the garden is protected from the growth of weeds.

There are other options for plastic fencing with imitation:

• brick;
• metal fence with an interesting color;
• forged fences with openwork design;
• color stakenik;
• wicker fence from the vine.

Decorative fences are found in the form of plastic flowers and other objects.

Features of DPK beds: characteristics and advantages of products

Many dackets resort to the construction of beds from boards made on the basis of a polymer composite (DPK).

Such products possess several significant advantages:

1. A simple assembly and dismantling system, which involves a special system of fixtures.
2. Durability inherent in all polymeric products.
3. Aesthetic appearance - products made of wood-polymer composite imitate a real wooden board. The material is well amenable to staining procedure, so there are many color variations on sale.
4. The ability to create a flower and beds of an unusual form.
5. Smooth surface of products.
6. The ability to achieve savings in the construction of a garden, purchasing instead of expensive materials of the DPK-panels, which according to characteristics exceed the usual wooden board.
7. Simple care system and practicality.

Groans made from DPK-panels are characterized by high, maintain the colors of natural wood species, as well as their natural texture. The disadvantages of the material are a bit, but they still have. With long-term moisture contact, the design tends to absorb it, which is why mold may form.

Note! The products are recommended to be processed using a special protective composition to prevent the destruction of panels under the influence of ultraviolet.

Specifications of fences for gardening from DPK

For the manufacture of DPK-panels, a mixture consisting of plastic and wood flour is used, so this variety of material can be called relatively natural, if compared with PVC products. After mixing the components, the polymerization process occurs, as a result of which the panels acquire new properties, therefore the designs of such beds are widely used in rustic construction.

Product specifications:

In the process of assembling the beds, two types of parts are used: directly the board and hinge with swivel mechanism. To fix the structure, the presence of special pegs, which connect the elements among themselves, and also apply to increasing the height, if it is necessary to increase this indicator.

The grid, as a fence for the beds, does not take such popularity as previous product options. But she has its advantages. This type of fences will have to be placed if the children play with the ball on the plot. A soft plastic network stretched between supports will protect the plants from damage.

Features of assembling beds from plastic panels do it yourself

To build a bed from the DPK panels, you will need a set of boards and lags that will be used as columns. In addition, it is necessary to stock decorative plugs, which will prevent garbage and dirt entering the rotary hinge mechanism, as well as corners that close outer angles.

Garling manufacturing technology:

1. The plaques made of wood-polymer composite are cut into pieces of the desired size. The length of the segments is selected taking into account the dimensions of the future bed.
2. The height of the angular columns should be 0.2 m exceeding the upper limit of the fence, the difference in a similar indicator of internal columns is 0.5 m.
3. Boards are bonded between themselves in a seamless way. Such a result is achieved by mounting one panel to another as close as possible. The presence of gaps is not allowed. For the purpose of saving, it is allowed to use bars from wood or metal corners as refinites.

Helpful advice! Bonding panels can be performed at different angles, so that it appears to experiment with shapes of beds. The minimum permissible angle is 60º.

After the assembly, the box from the DPK panels is fixed on the angular supports in such a way that the free cutting of the support exceeding the height of the fence is located below. He will subsequently burst into the ground. The formed framework should be carefully transferred to the place where the garden will be organized, and align the design diagonally.

After that, the installation sites are determined by the installation of the corner supports, the installation of the box is performed according to this markup, intermediate columns inside the design. To secure boards on supports, it is recommended to use selflessness. At the end of the work, corners are cut, they are fixed by self-draws.

Most designs made of plastic are supplied almost in the finished form. The assembly technologies of such elements are very simple and most often consist only in a consecutive connection of the elements available in the set. For this reason, plastic fences for the beds are so popular.

So that the rain does not blur the land and did not harm harvest, you can make a fence for beds from plastic panels. Thanks to such designs, the beds will look neat. Previously, wooden panels were installed as fences, but even with the annual painting, the tree absorbs moisture and begins to rot and collapse, bacteria multiply in the wood. It is much more economical to use plastic fences for beds. They do not spoil under the influence of ultraviolet, rains they are also not terrible. They act like a good decoration of the household site.

Cutting fences are set for several reasons:

1. 1 Suriable ground can be blurred after watering or rain. Bursts in such cases are simply necessary. They will not give the nutrient ground to spread around the perimeter, creating drips and dirt.
2. 2 With the help of plastic fences, you can create a reliable base for the greenhouse.
3. 3 Bordeur of plastic protects the bed with weeds from entering it. It is sticking to the ground, so plants such as reed and drinking can not penetrate it.
4. 4 Grokes look aesthetically and well maintained, if they protect them with plastic curbs.

Plastic panels have plenty of advantages over other types of materials:

1. 1 Use them in any region. They have resistant to sharp temperature differences.
2. 2 Low cost of plastic panels.
3. 3 The material is not subjected to rotting and fading processes from the effects of ultraviolet rays. It does not appear fungus and mold. Therefore, beds from plastic panels will preserve for a very long time.
4. 4 Plastic panels are strong, but have sufficient flexibility, so you can create garden structures of a variety of forms.
5. 5 The material is not toxic, and harmful substances that disturb the microflora are not distinguished into the soil.
6. 6 The special departure of plastic panels is not required, you can simply clean them from dust and dirt with the help of water from the hose.
7. 7 plastic acts as a barrier between plants and weeds, without giving the latter to penetrate the bed.
8. 8 To install panels, no specialized knowledge and tools are needed.
9. 9 Due to the variety of sizes, you can do as high Grokesand low.

Taking into account such a number of advantages, plastic panels are very popular among dachens. They appreciate them for practicality and convenience acceptable to the price and due quality.

The market presents a huge range of plastic products for beds:

• flexible border tape;
• panel "Garden board";
• fencing "Garden Designer";
• plastic grid.

Everyone can choose a suitable fencing depending on financial capabilities and wishes.

Border tape: Specifications and installation work

Plastic border is a popular and convenient fence. It costs cheaper than other types, easy to install and looks beautiful. It is sold in the form of plastic tapes, the length of which depends on the specific manufacturer. The material is very thin, about 0.5-2 mm, and the height is 10 cm and above. The selection depends on the height of plants planted on the site. With the help of a curb ribbon, you can create a bed of any form. Ribbons are wavy, corrugated and most different colors. It does not affect the practicality of the material, only on the appearance of the site. Burgundy ribbons can be used to fen the dacha river tracks: through them gravel will not be saturated. Plastic ribbons can be fencing shrubs that grow from the root. Wide borders from 25 cm are designed for inclined beds so that water does not flow with water when watering. Ribs can be removed the greenhouse around the perimeter so that weeds do not penetrate it.

For the installation of curb ribbons you need only one helper. Before installation, you will have to dig up a shallow trench around the bed, in the corners and perimeter to install pegs. Cheing are usually sold complete with a border. The distance on which pegs are put is written in the instructions for the kit. Then the curb stretches, and the groove falls asleep the earth. In winter, the borders are better to cover with something, and it is also impossible to step on them.

What is a "garden board"?

Great option of fence for beds - plastic board. It is distinguished by strength and is not afraid of mechanical exposure. The width of the boards varies up to 15 cm, and in length it can be up to 3 m. Installation of plastic boards - the process is not so complicated. Products are equipped with grooves for reliable installation convenience.

Garden boards can be fencing not only the beds in the country, but also children's sandboxes.

They have a smooth surface, capable of withstanding almost any loads, they do not have scratches.

The colors of the boards are diverse, the gathering will not be difficult to construct a bright decorative composition. Plastic boards are resistant to temperature differences and high humidity. For installation in the greenhouses, they are best suited, if necessary, you can attach a frame or a film. Thanks to such designs, high beds will not crumble. The only drawback of this type of plastic fences is a big value.

Installation of a garden board does not require any special skills and takes not much time. To start the board are connected to each other with the help of special grooves. Peers are dripped in special holes around the perimeter. The holes are closed by stipulated by the plugs.

Border "Garden Designer" and plastic mesh

One of the types of flexible curb ribbons - "garden constructor". It is a tape of plastic elements that are connected without much effort and closed into the chain. Thanks to this constructor, it is possible to build a bed of any shape and sizes. Installing them is very simple: the links are connected to each other with the help of special fasteners and are fixed around the bed. They are fixed with the help of sharp protrusions that are at the bottom of all elements. This method of fixing is the most reliable.

For the fence of the plots or division of a large area, a plastic grid is used. It has an attractive appearance. The advantage of plastic is that it is not subject to corrosion. Especially relevant to use the grid for those who have children. It perfectly withstands even the direct hit of the ball, reliably protects fragile plants from children's pranks. A plastic grid is installed in the same way as metallic. On the perimeter of the limited area, columns are put, a canvas is located between them. It is important to tighten the grid for better stiffness and reliability.

Budget options

Finished plastic panels for beds can be purchased in a specialized store, but they are not so cheap. As budget option Fences can be used plastic bottles. They over time accumulate in every home. Creative decorative curb can be built from plastic bottles.

Working with bottles, you need to follow several rules:

1. 1 It is advisable to take bottles of the same size and color. You can also use the container of different colors, but they are better to install in a certain order so that the garden looks aesthetic.
2. 2 Before building a border, the bottle must be washed, remove the labels and dry. After that, cut part with the neck. Bottles are installed by races up.
3. 3 For decor, you can use others made of the same bottles, elements.
4. 4 To drain the design, bottles can be filled with sand. If desired, the finished fence is easy to paint in any color paint designed for external work.

Plastic borders are becoming increasingly popular than due to its low cost, strength and reliability due to its low cost, strength and reliability. Any dacket can choose the most suitable and financially favorable option. Plastic fences are installed very simply and do not require any additional care. It is sometimes enough to clean them from dirt. They help to create a unique design on the site due to the diversity of color.

Today, fences for the beds are presented in a wide range. For the arrangement of its nursery and giving it decorative qualities, protective structures from plastic panels are actively involved. In addition to the feet, similar material for the branch of clubs and beds. Let us dwell on the benefits of such a design and methods of its installation.

Description and photo of fences for beds from plastic panels

Plastic fences today are presented in a wide range. Each design is different in its form and sizes.

Looks like, you can see in this article.

Plastic ribbon.

In this case, the product has a kind of a flexible, which is involved in the formation of raised beds of various sizes. Its design can be used to separate lawns and flower beds from tracks. The ribbon is characteristic of the average degree of rigidity. The height can reach 20-50 cm. This is quite enough to form a comfortable fender construction.

As a result, you get a bed that does not blur and keeps shape perfectly. Delivery of this tape occurs in rolls, the length of which reaches 50 m. One roll will be enough to protect the entire area, and its cost is absolutely small. With a wide ribbon, you can limit the growth of berry bushes.

What looks like, you can see in this article.

Also, the ribbon is actively used to fencing flower beds and beds of various shapes: round, oval, incorrect. Thanks to which you can expand your designer opportunities. Coloring can be the most common color, but the design of green and in greater demand is in great demand. brown color. Thanks to the flexible tape, it is possible to create multi-tiered flower beds, which will become an excellent decoration of the front of the house.

The process of installing the tape is very simple, since the bursts and instructions are coming with it. The installation of pegs is carried out at the corners of the garden and the same all over the perimeter. The ribbon is then fastened to the pegs, and the lower part goes into the ground. When installing the tape, it is necessary that it is in the stretched state. Due to this, you can get the necessary strength.

Garden board

And although there is a large number of positive qualities, the curb ribbon does not have sufficient rigidity. For this reason, she will not be able to withstand impact. The greatest strength is the fencing from plastic, which are often called a garden board. The design is presented in the form of panels, the length of which is up to 3 m, the height is 15 cm. They are equipped with grooves and fasteners, as a result of which the assembly occurs very quickly and easily.

With the help of such a design, it is possible to protect not only the beds and flowerbeds, but also holiday sites, children's sandboxes. The garden board is made in the form of a smooth and smooth surface for which high strength indicators are characteristic. It is not affected by mechanical factors, even able to withstand a strong blow. The color solution of the panel may be the most different. Thanks to this, everyone will be able to build a well-thought-out composition that will become an excellent decoration for your site.

The design of this type is actively used in the fence of greenhouses, closed beds, because it is very easy to mount metal carcass and film. Garden boards of their PVC firmly protect the beds from scattering. Products are not afraid of moisture and sharp change of temperature. The only disadvantage of such a fence is considered its high price.

The process of assembling garden boards is simple. For this you do not need to possess special skills. The equipment involves the presence of instructions and pegs. After unpacking the set, you must connect the hotel panels using grooves and protruding elements. Now everyone to install on the ground in a vertical position and begged, using special pegs. Plugs are used to close the holes in the fastening of the pegs. Then the design acquires aesthetic look.

Garden constructor

This is another kind of PVC border, with which it is possible to create a bed of any shape and size. The design assumes the presence of separate parts that are connected to a single integer during the assembly.

Positive quality design

The fender construction made from PVC includes a whole complex of important advantages. From here you can allocate the most common:

1. The practicality of small PVC fences for the beds is high on the bulk and loose soil. Thanks to this product, it is possible to form a full-fledged flowerbed by adding land into it. In addition, it is possible to get a multi-tier bed.
2. Can be received different kinds Frames - in the form of oval, circle, curvilinear.
3. Does not affect moisture and does not destroy.
4. Under the influence of the Sun, it does not lose its color.
5. Easy installation.
6. PVC fencing will be a real decoration for your dissing plot.

Application area

PVC fences are actively involved for fence. And it is not by chance. Such a demand is connected with the fact that the design has a long service life, and according to external qualities, they do not inferior with metal products. In addition, plastic fences are not afraid of corrosion influence. Such products are actively involved in the fence sports field, because they have high strength and are able to withstand a straight blow from the ball. It is more convenient to use such types of beds.

The next area of \u200b\u200buse is the rental of fence for construction sites. Such grids will be excellent protection of the building forest, because through such a fence will not fly dust and various garbage. When installing the grid, you need to monitor it to be perfectly stretched. Only it will be possible to achieve the necessary stiffness and reliability.

How to make it yourself

The plastic fence is definitely expensive pleasure. Not every dacket can afford it to buy. Therefore, today it has become possible to make a beautiful and durable fence with your own hands. The most sought-after option is the use of incommary plastic bottles. Most people buys drinks, and then just throw away.

Initially, it is worth removing the narrow part of the packaging along with the neck. It is necessary to try to ensure that the remaining part with the bottom was the same diameter with each of the bottles used on the fence structure. After that, tard fill the earth, perform a shallow groove that will serve as a framing for the site. Turn the tank with the ground up the bottom, install. You can pull the rope from one end of the groove to another in advance. This will allow you to monitor even building the fence.

When all prepared containers are filled with land and installed, it is worthwhile to the ground around the edge. If you choose bottles by color decisionYou can get a fence that will become a kind of highlight of the entire household plot.

In the video - the ideas of fence with their own hands:

Plastic fence for the bed - this is an excellent opportunity not only to improve the quality of plant care, and also give beautiful view yours land plot. Every gardener has two options - buy a ready-made fence or make it personally. No matter how much way you choose, it is necessary to understand that each of the presented design will be in its own way to decorate your garden and at the same time perform its direct responsibilities in terms of creating favorable conditions for growing specific cultures.

From this article, you can find out the features of such products as beds from a plastic board: scope of application, pluses and cons of structures made on their basis, varieties of plastic fences, as well as their technical and operational characteristics. The reader will get acquainted with the specifics of plastic panels, borders, ribbons, designer products, as well as fences made of wood-polymer composite.

Fencing designs for beds in finished form are presented in the market in an extensive range. Plastic products are the most common and in demand among the owners of country sites. Such success is due not only to low cost, but also practicality, the durability of these structures, as well as many additional advantages, at the expense of which they won in comparison with wood, metal or stone.

One of the main advantages of plastic is its low cost

Note! The plaque from polyvinyl chloride (PVC) is capable of 100% the moisture obtained by the soil during watering or rain, inside the design.

Why buy plastic fences for flower beds and beds

Plastic products are characterized by versatility and mass of advantages, which are appreciated by many dackets.

Advantages of plastic products:

• practicality - products have a small weight, which allows them to use them even on the bulk soil. Over the garden, made of a solid plastic board, can be pouring a sufficiently high soil layer. If necessary, the size parameters of the frames, in particular height, can be increased by adding additional parts;
• aesthetics and a wide selection of design - customers are available to various options for borders or plastic fences, on the basis of which it is possible to create a bed of unusual curved forms;

• resistance - plastic products are not subject to negative impact of corrosion, they are preserved at an initial form over the years, without reacting to moisture and other negative environmental factors;
• the ability to maintain color for a long time - products made of high-quality atmospheric plastic are not burned in the sun. Even under conditions of prolonged exposure to ultraviolet rays, plastic elements will retain their original color and shape;
• an extensive scope of application is a rich assortment of products with different configuration and coloring allows you to support any exterior of the house and create a unique landscape design in the yard. Plastic structures are used to zoning the yard, forming decorative fences to highlight the garden or sidewalk path, as well as to focus on individual objects;

• simple installation system - installation and dismantling does not cause absolutely no difficulties, and the designs themselves are mobile and can be used repeatedly.

Varieties of garden fences for flower beds and plastic beds

Plastic designs of the beds are made of a special material that does not release toxic substances in the soil even when heated. Modern products have improved characteristics. Due to this, the owner of the site can buy fences for garden beds that are not terrible high or low temperatures.

Note! Under the influence of frost designs are not covered with cracks, and the straight sunlights are not able to melt them. Therefore, beds from plastic can be used in any climatic conditions, without fear that they will ruin.

Artificial origin of the material is also associated with some benefits. First, insects cannot damage products, as they do not attract them. Secondly, plastic is not subject to such processes as rotting or corrosion. Thirdly, the material does not have comfortable conditions for the development of mold.

You can buy plastic beds for cottages in any specialized store, the market offer includes several product categories:

• border tape of plastic;
• flexible fences, called garden designer;
• panels "Garden board" from polyvinyl chloride;
• fencing in the form of a plastic grid.

There are many variations of plastic fences for beds for sale, to buy these varieties of products can be used any color and size. Some types of structures realistically imitate natural materials, such as wood or stone, without at the same time their shortcomings.

Features of plastic borders for tribes in the form of a ribbon

Plastic fencing in the form of a ribbon is widely used by dackets for organizing a garden and flower in the site. Due to the flexibility of the product material allow you to create structures with outlines of various shapes. On sale are presented, the width of which varies in the range of 0.1-0.5 m. This height is enough to break the raised beds in the territory.

The plastic tape protects the mound from the blur by water when watering the garden is carried out or rain rains fall out. In such conditions, the root system of plants will remain in its places, it is reliably protected from damage to flows.

Helpful advice! If the site is required to limit the growth of bushes, for these purposes it is recommended to buy a plastic border for a large width beds, for zoning lawns, organizations of flower beds and decorative gardens, as well as the formation of bulk paths more expedient to use narrow tapes.

The process of mounting the border tape does not require experience or special skills. With this task, any dacket will cope with this task. Included with the product supplies manufacturer's instruction with a detailed description of the procedure and a set of stakes for fixing the border. To set the ribbon, it is enough to dig around the perimeter of the future bed, a trench of a small depth. Then the tape should be pulled, it is desirable that this manipulation performs two people.

After the tape is placed in the trench, the stakes are installed on the sides, which will fix it in the desired position. It will only be left to fill the land ditch and carefully tumble it. In order for the design of the garden to be solid, it is necessary to connect the edges of the tape with brackets with a stapler. Such a garden is able to serve for several years. If necessary, it can be easily obtained from the ground and transfer to another place.

What can I buy fences for beds in the form of tapes: features of the range and rates

Designers of the landscape and owners of country sites prefer the border ribbons for the reason that this type of product has increased flexibility. Based on plastic borders, you can create unusual flowerbeds and beds of a bizarre form, the ribbons are perfectly suitable for the formation of curved lines. The price of the material is low, and the extensive range opens up new opportunities for design.

By purchasing ribbons of different widths, you can create multi-tiers or flower beds on the site, which, thanks to their decorativeness and compactness, use high demand for dacities. Products of various colors are on sale. The multi-tiered design of the bed will look more spectacular if the sides of each tier will have a different shade.

Middle rates on border ribbon:

Helpful advice! To create a relaxed atmosphere on the site, it is recommended to use the tapes of dark colors. For the placement of accents around certain objects it is better to use bright borders, such as orange, yellow, red.

Plastic boards beds: product specificity

Despite the fact that the curb ribbon has many favorable properties, it is unable to become an alternative to the hard fence. The design of the beds from PVC panels can withstand a large soil pressure, a random gift of the shovel or other garden tools during the treatment of the garden. This type of product is called "Garden Board".

Externally, it looks like panels. Their length can vary, but the maximum limit of this indicator is 3 m. Board width - no more than 15 cm. In the end parts of the boards there are fasteners and groove recesses that significantly simplify and speed up the process of assembling the beds. Due to this system, you can create structures of any size.

The assembly of beds from plastic boards is carried out with the instructions of the manufacturer. A set of products, in addition to panels, includes stakes made of plastic. To construct a bed to make enough board boards with a protruding attachment and groove grooves. After assembly, the product is installed on the ground and is fixed at the expense of plastic stakes that are driven into the ground. At the end of this process, decorative plugs are installed at the fasteners, so that the earth does not fall into these holes.

At what price you can buy ready-made beds from plastic for the garden and how to apply them

Plastic boards are used for the construction of floral flower beds and beds on the household plot. In addition, this type of product can be applied to the improvement of the local area, protecting the sandbox on the playground, a zone intended for recreation, lawns and other objects. Panels are characterized by high strength. The surface of products is smooth.

Sets of fences for beds from plastic panels can be used in the finished form. Manufacturers offer dozens of coloring, so the summer residents have the opportunity to create interesting compositions. Products are not afraid of temperature differences and prevent the soil erosion. Only high cost can be attributed to the disadvantages of such beds.

Note! Plastic garden board can be used as a fencing for greenhouses and greenhouses. The panels are suitable for installing the framework and are able to withstand the load of the entire design.

Middle rates for beds from plastic panels:

Garden constructor

Garden constructor is one of the varieties of fences for beds made of plastic. This type of product makes it possible to show a fantasy and build a beautiful decorative garden or flower bed on the summer cottage, and completely any sizes and shapes. The garden designer is a set of plastic parts that are connected in a certain way. As a rule, the manufacturer's instructions that are in each package describes in detail the entire process.

As a result of the assembly, a one-piece structure is obtained in the form of a side, which is used to form a bed and fixing the soil. The main advantage of the garden designer is its versatility. Unlike the garden board, the elements of the designer allow you to create on the site both large and small fence depending on the needs of the owner. The finished design perfectly holds the soil within the bed, as well as moisture, the necessary plants for development.

Note! Products have a lightweight weight, so there are no restrictions on the state of the soil. Such beds can be installed on areas with loose or bulk soil.

The garden designer is successfully used to create multi-tiered structures. To give a garden or flowerbed an unusual appearance, you can form curved lines or achieve asymmetry for forms (for this it is enough to shift tiers relative to each other). The installation process is extremely simple: it is enough to buy plastic beds in the required quantity, connect the parts with the help of fasteners and install on the site.

Article on the topic:

Interesting ideas for the design of the country area and greenhouses. Using healthy materials to create an unusual design Grookok.

Price of the Garden Designer for Groakers:

Unusual options for fences for beds from plastic panels

In addition to standard plastic fences, there are many product options with an unusual design. For example, a garden labyrinth consists of plastic elements that imitate real stones. Products have a gray coloring. Despite its ease, this plastic fence has durability and resistance to negative weather factors.

A garden labyrinth has an extensive scope of application, it is used to zoning various objects on the site:

• flowerbeds;
• beds;
• and decorative reservoirs (ponds);
• flower beds;
• tracks;
• landscape design elements;
• lawns.

The border-labyrinth looks restrained and not striking, it will optimally fit into the space of any country area. Sections made of plastic are easily deepened in the soil. Most often, the kit consists of several elements. Their height is 0.08 m, and the total length of the set is 3 m.

Note! The garden labyrinth has a special protrusion and notches, thanks to which it can be without interference to mock the grass in bed. At the same time, all vegetation on the border of the garden is protected from the growth of weeds.

There are other options for plastic fencing with imitation:

• brick;
• metal fence with an interesting color;
• forged fences with openwork design;
• color stakenik;
• wicker fence from the vine.

Decorative fences are found in the form of plastic flowers and other objects.

Features of DPK beds: characteristics and advantages of products

Many dackets resort to the construction of beds from boards made on the basis of a polymer composite (DPK).

Such products possess several significant advantages:

1. A simple assembly and dismantling system, which involves a special system of fixtures.
2. Durability inherent in all polymeric products.
3. Aesthetic appearance - products made of wood-polymer composite imitate a real wooden board. The material is well amenable to staining procedure, so there are many color variations on sale.
4. The ability to create a flower and beds of an unusual form.
5. Smooth surface of products.
6. The ability to achieve savings in the construction of a garden, purchasing instead of expensive materials of the DPK-panels, which according to characteristics exceed the usual wooden board.
7. Simple care system and practicality.

Groans made from DPK-panels are characterized by high, maintain the colors of natural wood species, as well as their natural texture. The disadvantages of the material are a bit, but they still have. With long-term moisture contact, the design tends to absorb it, which is why mold may form.

Note! The products are recommended to be processed using a special protective composition to prevent the destruction of panels under the influence of ultraviolet.

Specifications of fences for gardening from DPK

For the manufacture of DPK-panels, a mixture consisting of plastic and wood flour is used, so this variety of material can be called relatively natural, if compared with PVC products. After mixing the components, the polymerization process occurs, as a result of which the panels acquire new properties, therefore the designs of such beds are widely used in rustic construction.

Product specifications:

In the process of assembling the beds, two types of parts are used: the board itself and the hinge itself with the rotary mechanism itself. To fix the structure, the presence of special pegs, which connect the elements among themselves, and also apply to increasing the height, if it is necessary to increase this indicator.

The grid, as a fence for the beds, does not take such popularity as previous product options. But she has its advantages. This type of fences will have to be placed if the children play with the ball on the plot. A soft plastic network stretched between supports will protect the plants from damage.

Features of assembling beds from plastic panels do it yourself

To build a bed from the DPK panels, you will need a set of boards and lags that will be used as columns. In addition, it is necessary to stock decorative plugs, which will prevent garbage and dirt entering the rotary hinge mechanism, as well as corners that close outer angles.

Garling manufacturing technology:

1. The plaques made of wood-polymer composite are cut into pieces of the desired size. The length of the segments is selected taking into account the dimensions of the future bed.
2. The height of the angular columns should be 0.2 m exceeding the upper limit of the fence, the difference in a similar indicator of internal columns is 0.5 m.
3. Boards are bonded between themselves in a seamless way. Such a result is achieved by mounting one panel to another as close as possible. The presence of gaps is not allowed. For the purpose of saving, it is allowed to use bars from wood or metal corners as refinites.

Helpful advice! Bonding panels can be performed at different angles, so that it appears to experiment with shapes of beds. The minimum permissible angle is 60º.

After the assembly, the box from the DPK panels is fixed on the angular supports in such a way that the free cutting of the support exceeding the height of the fence is located below. He will subsequently burst into the ground. The formed framework should be carefully transferred to the place where the garden will be organized, and align the design diagonally.

After that, the installation sites are determined by the installation of the corner supports, the installation of the box is performed according to this markup, intermediate columns inside the design. To secure boards on supports, it is recommended to use selflessness. At the end of the work, corners are cut, they are fixed by self-draws.

Most designs made of plastic are supplied almost in the finished form. The assembly technologies of such elements are very simple and most often consist only in a consecutive connection of the elements available in the set. For this reason, plastic fences for the beds are so popular.