Regular and correct haircut of a living hedge is a very important condition for this decorative part of the garden always please you with its fresh green and neat appearance. Haircut gives hedge tidy decorative View And, moreover, contributes to the formation of a more thick crown, strengthen the growth of the side branches and the leaves of the plant.

Live hedge cutting tools

For a haircut of a young hedge of small sizes, it is preferable to use a hand tool - ceattoror gardening scissors:

• they are less injured by the plant,
• after such a haircut, there are more than all living leaves,
• the haircut itself will be done more carefully.

For more mature plants and the hedges of large sizes apply electrical tools:

• custore
• chainsaw
• electric scissors.

How to cut a live elevation

In order to make a bleeding intake with smooth lines, the haircut is carried out along a stretched cord or using a special frame for bleeding from a bright wire.

Terms and quantity of haircuts

1. Living hedges of young plants in the first 2 years need a one-time annual haircut, which is carried out in early spring or late autumn.
2. In the future, the number of haircuts in the season can be increased as needed to 2-3 times a year.

1. First stage - Conduct plants

• Plants with a weakly formed crown cut into half the length.
• The branches of well-formed mature plants are cut by a third.
• Such trimming is made for the next season after landing.
• So, if the plants were planted in the spring, then the first trimming is carried out in the fall.

2. The second stage - form a hedge

• The purpose of the form is to give the hedge of the desired profile and increase the thickness of the branches.
• Do not strive to give hedges the correct rectangular shape with flat vertices and sides.
• With this shape of the haircut, the lower shoots are lack of light, gentle and die away.
• It is desirable that the height height has a much larger width.

Forming haircut haircut

The most natural shapes of haircuts are rounded or trapezoid profiles with a wider base below. Then all shoots of the plant are developing in a good light, and the hedge retains a beautiful well-groomed look.

1. The first forming haircut of deciduous hedge should be carried out on the 2nd year after planting plants.
2. In young plants, no more than 1/3 of the annual growth of shoots are cut, and the ripe plants of the branches are cut to half the growth.
3. An unnecessary length is removed by making a braid cut over well developed by the kidney.
4. When forming rectangular forms, the side branches of the hedge should be cut more deeply than the tops.

Anti-aging haircut

If the hedge lost its beautiful view and decorativeness, then it is necessary to apply measures to restore it.

In this case, it is carried out rejuvenating haircutwhich includes two stages:

1. in the first year there is a deep haircut on one side of the hedge, retreating 10 cm from the trunk,
2. for the second year, deep haircut is carried out on the opposite side.

Conduct sanitary trim in a timely manner - cut the dry old weak branches, as well as pests affected by pests.

For each type of plants from which an elevation is formed, there are features in the haircut. List some of them.
_

Haircut of Live Hollow from Barbaris

Of all the shrubs, Barbaris retains its spectacular shape after a haircut. In addition, it can be successfully created by quite complex curly profiles.

1. Strike an elevation from Barbaris, even a lot of scratched, you can at any time of the year.
2. In addition, Barbaris triggers a haircut of 1-2-year branches.

Bararis has many wonderful advantages. Currently, a huge number of barberry varieties with the most various options Coloring leaves, which makes it possible to create very beautiful multicolored hedges.
___________________________________________________________________

Hawthorn

With a timely haircut and leaving, the hedge of the hawthorn grows very thick, practically impassable.

1. To create such a hedge, the seedlings of the 2nd year are cut off at a height of 15 cm from the soil, and then one or two of growing shoots leave, cutting all the others.
2. Until the hedge grows up to the desired height, re-emerging the shoots intertwined with each other.
3. Horodi's haircut produce every year in summer and spring.

_____________________________________________________________________

Haircut of a live bleed from turquish

The turquoine is especially appreciated for its high conquest, thanks to this, the hedge is resistant to the irregularity of the haircuts and is easily restored even after trimming on the stump.

1. The haircut of the turquish should begin as early as possible, at the moment when planted plants moved into growth.
2. First, only the tops of the shoots are cut slightly, after the branches will grow by 15 cm, the procedure is repeated. Such a stage of preparation of the crown to the formation lasts 2 years.
3. Then you can proceed to the formation of the hedge profile. The most optimal form of the profile is trapezoidal.

It is necessary to maintain the shape of the hedge, we need frequent regular haircuts for 3-6 times in the season from May to September.
___________________________________________________________________

Hawk haircut from coniferous

Hedges of ate very beautiful and shades, however important condition Care for such a hedge is careful compliance with the regularity of the haircut. Launched coniferous hedges cannot be fixed, since the branches become too powerful and the cropping is not amenable.

1. In the first year after planting, the plants are not exposed to pruning to give them the opportunity to better adapt.
2. On the next year The haircut is carried out in May or June, while shortened the top shoots about 1/3 of the length, and the side - by 2/3.
3. At the same time, it is necessary to strive to give the hedge of the desired profile. The most optimal trapezoid form profile, but the rectangular form is also allowed.
4. In subsequent years, the bleeding form is maintained by trimming, which is carried out at the end of June during the period before laying new kidneys.
5. Hollows from Juniper and Tui must be cut every year, giving them a trapezoidal form. Strike such hedges are much easier, but it is very important to observe the regularity of the haircut, conducting it at the end of each June.

Livestores can be originally to issue a plot, split it into sectors, to burn out of curious neighbors. So that the planting performed its decorative and applied function, you need to care for it: to properly cut, form, feed. We will tell in the article as a trimming of a living hedge occurs, with which periodicity it needs to be carried out.

So that living fences look so carefully, they should be cut from 2 to 5 times / year and more often, which depends on the type of plants

Basic rules trimming shrubs

Basic caring events relative to the ground part of the living ingreders are haircut and pruning. Crop live fencing follows not only to preserve its beauty. Due to the correct formation, each plant will be strong, and the composition will be harmonious, dense, uniform.

In order for the procedure to offer benefits, you need to adhere to 10 simple but required to comply with the rules:

1. Prothesing to produce strictly in the period allotted for one or another type. Otherwise you can destroy the plant.
2. Crop the living fence of intricate shape is preferably using templates.
3. Plan the shape of the hedge initially, the formation gradually, following the target target.
4. If there are bird nests in the branches of hedges, the trimming procedure should be closed until the young birds are not evaporated from them.
5. Crossing to carry out the type of plant from which a living fence consists.
6. Live fences from plants having foliage, trim regularly.
7. Vegetable fences from conifers can not be trimmed later than the third decade of August, otherwise the new shoots will not have time to fully observe to frosts.
8. The fence under triggery is well powered.
9. After pruning the plant need to water.
10. You should choose to choose tools for trimming.

By purchasing fixtures for the cutting of plants, it is necessary to pay attention to whether they are made of high-quality material, whether they are convenient to keep them in the brush, for what specific goals are planning to use the tool, etc.

Types and goals Pruning live fences

There are several types of trimming of living fences. Each of them fulfills its tasks and is carried out at the appropriate period of the year.

No. p / p	Type of trimming	Goal	Time spending
1.	Forming	Formation of the crown and determining the density of its saturation branches	Mid-February - March
2.	Adjusting	Support for specified parameters formed crown, achieving the balance of lighting	As needed, but not in the winter and not during the candy
3.	Regenerating	Return opportunity to grow, blossom, fruit	February - mid-April, August - September
4.	Rejuvenating	Impetus for the formation of young shoots in the aged plants	Mid-February - mid-April, August - September
5.	Sanitary	Elimination of dead, sick, interfering branches	All year, except for winter and the period of active inactivity

Tip # 1. Choose the time for rejuvenating trim depending on the type of hedge. In the evergreen hedge, it is carried out in April - the first days of March. Falls are better to cut at the end of winter while they are still resting.

Features of the primary and subsequent trim

Freely growing plantings do not need to be modified artificially. Folded fences need triggered. And those and other varieties of hedge in the first time after landing require care.

Such light trim is necessary to increase the thickness of the branches

Primary trimming. It depends on the quality of the rooting of the plant, the idle of plantings in the future. The haircut launches the intensive growth of young shoots, stimulates the development of the root apparatus. The table below shows the information relative to the primary trimming.

When the plant has grown. The resulting deciduous fence that has reached the desired size is cut off often (almost every month). It is useful to break the crown - 1 time / a few years, in spring before the kidneys appear.

Old, thickened branches are eliminated, and the young shortening for two thirds of their length. The formed fence from conifers will cut at least 2 times / year, but for some plant species - less often.

Working tools for trimming branches

Attention should be paid to the choice of tools that are covered and haircuting plants. Cheap, low-quality tools quickly come into disrepair. They are loosened at the base, and the blades lose sharpness. If trimming branches with such devices, it is possible to put significant harm to the plant instead of the expected benefit.

To achieve a qualitative result, such tools are suitable:

• the secator is used for delicate actions (for example, to cut plants with thin branches);
• scissors with blades-teeth are used to remove large-caliber branches, widespread stems;
• suchkores - designed to work with the most thick, highly harvested branches;
• electronics - to their help resort to the purpose of making plants in the intricate form (double-sided tool) or for the design of direct hedge sites (one-sided).

For quick and high-quality coercion of the tops of large hedges, it is convenient to use electrical trimmers.

Board # 2. For large evergreen shrubs (for example, Laurea Cherry) it is advisable to choose a secateur. Scissors can strongly damage sheets, which will provoke the loss of plant decorativeness.

How to trim and form bushes

For trimming and forming decorative and deciduous shrubs (for example, viburnum, lilacs, flashes) they are cut by the secret one after the landing. Primary trimming is carried out in spring, at a height of 30-40 cm from the soil. Further requires the correction of the CZD shape twice / year.

For living fences, curly annuals and perennial lianas are also used (wild grapes, tea rose bushes, ivy, etc.). Plants are quickly branched, because the formation is required regular. Use scissors or a secateur. Form plants, creating arched complexes, shadow their arbors, fences. Rose and grapes cut in autumn. Hop Liana, Ivy should trim the early spring.

Features of plant formation, more often than the rest used in the creation of living fences:

• Privet. In order to form a shrub with a beautiful crown, it needs to be regularly cut off from the 2nd year. In modern landscape design Distribute semicircular, spherical, cubic figures. Cropped with suchkores and a secateur. As a result, flowering decreases, but the increase in branches and foliage is enhanced.

For the first time, more than ½ shoots are cut on the turquish, in the future - up to 70% increase.

• Spirea.Pruning depends on the variety of plants. Bushes, forming flowers on last year's branches, can not be cut every year. Crop the plant at the end of flowering, to the root. In the spring - remove up to half the length of the branches. Other varieties need careful annual cleaning. The branches in the spring are cut to the first kidney.
• Hawthorn. It is not necessary to cut the hawthorn fence from the soil, it will still not help get rid of the stem of the trunk. Pruning is carried out once in the season. Remove the lower branches above the pronounced kidney. Young shoots allow you to grow up, and then they cut off.
• Thuja.The plant reacts well to the haircut, quickly acquires new shoots. The first time is trimmed in June when you specify the form. Correction is carried out in the middle of summer. The width of the vertex of living fence should be of its foundation.

Cuts young triggers with a thickness of up to 0.5 cm with special scissors.

• Spruce.Form a spruce hedge in spring. So that the planting had a beautiful view, it is necessary to restrain the growth of ate. Trimming allows you to make a fence fluffy and moderately high. It also helps to give the original shape of Crown.

In the ground, stakes (along the run of the hedge) and stretch on them the twine. Fix the rope to the desired height, length or width. In other words, create a peculiar limiter to be trimmed. A sparkler tool, follow the fact that the twine does not shift. A lot of effort to make a simple design from columns and ropes, it will not be necessary. But there is a lot of benefits from her. The hedge will acquire the correct, harmonious form. In addition, the cropping process will pass faster and easier.

Caring for planting after trimming

After trimming, the plant needs to provide high-quality care. It implies fertilizer and adequate watering. It is best to make fertilizer in the first months of spring. Use:

• compost - 3-5 cm thick it is laid around plants;
• complex (universal) mineral supplements - suitable for all species of plants;
• special mineral fertilizers - Used for a specific type of hedge (deciduous, coniferous).

Well affects the condition of the cropped plant is abundant watering and mulching of the soil, as well as regular weeding, soil loosening. If it is incorrectly to care for a living feed after, trimming can weaken plants, lead to loss of decorativeness, to the death of plants.

You can climb the soil with dry grass, the ground with a layer of 5 - 8 cm.

Typical mistakes of gardeners

Many are trying not to expose young plants at all in the first few years after their landing in the ground. This is also wrong. It is necessary to carry out the correct cropping of planted plants to prevent their rapid growth in height. If the pruning does not do, the base of the plantation will be naked, and the top is too dense. Also, by trimming in the early stages of the development of the hedge, they stimulate the abundant appearance of roasting sprouts.

Quite often, inexperienced gardeners do not give the proper values \u200b\u200bof the fantastic plant after cleaning its ground part. Even if the trimming was produced correctly, the lack of due nutrition worsens the condition of the living hedge. Cutting the branches, we deprive the plants providing her trophic foliage. It is recommended to make useful mineral substances in the soil, mulch.

Even freely growing hedges Sanitary trimming is necessary at least 1 time / year

Answers to frequent questions

Question number 1.Is it possible to use cut shoots and leaves as a mulch?

During sanitary trimming with live branches, branches and foliage should be collected and burned. They can be sources of disease and harm healthy planting.

Question number 2.How to correctly relate the width of the hedge to height during pruning?

In order not to be cut over the lower part, the hedge should be more widely, rather than above. It is advisable to cut and form it in such a way that the width from all sides of the living fence with an increase in height by 1 m decreased by 10 cm.

Question number 3.Are all living fences need to cut?

Free-growing hedges do not cut. It is advisable to apply sanitary, stimulating trimming.

Question number 4.How deep should the haircut of a living fence?

Surface haircut, when only shootings are removed, leads to breaking and loss of decorative plant. The depth increases as the hedge grows.

Question number 5.When to trim the flowering shrubs?

Shrubs that form inflorescences on old growth are trimmed and form immediately after flowering. The rest form early spring.

Summing up, I would like to recall that exact terms, character and methods of haircut depend on the type of plants. The importance of proper trimming is difficult to overestimate. It defines the health and beauty of the living hedge. It is because to approach this stage of care for plantings should be responsible and carefully.

Geometrically correct and neatly trimmed alive hedges are striking by their sophistication. Topiary art is a whole science of a figure haircut that requires not only high mastery, but also the knowledge of botany. The haircut should be started immediately after planting plants. The hedge cannot be launched, otherwise it will be difficult to bring it into a proper form, and when using some plants - and it is impossible at all.

Hollows from deciduous rocks, if they were planted in autumn, chopped into 1/3 of their heights in March. If they were planted in the spring, then the first trimming is carried out only in a year: that is next spring. Immediately after landing, a solid trimming is required to cause abundant growth of escapes at the base.
Plants purchased with cereal roots must be trimmed by half a height, and seedlings grown in a container - approximately 1/3. On this and the trimming is completed in the first season.

In the second year, the plants are slightly cut (about 4 times for the period from May to August). Such light trimming is necessary to increase the branches of the branches and give the desired form. It should be carried out regardless of the height of the plant. In subsequent years, the haircut is carried out to give landings of a neat species.

Deciduous bushes are better to trim the early spring, before the appearance of leaves, and coniferous rocks - in April or late September. Falling plants are easier to carry the pruning procedure than coniferous. The technique of haircuts of the living formulated hedges is very different from trimming evergreen or leaf falling shrubs and, to some extent, more simple and convenient.

Strong trimming (at a height of 15 cm from the soil level) is necessary forges from the Tern, hawthorn, turquish, a snowy year and Tamariks. Hollows from Barbaris, Beech, Samshat, Kizylnik, Japanese Beckleta, Grab, Some types of honeysuckle, picracuds, rosemary and laurel viburnum holds only 1/3 of the height of their growth and slightly shorten the side sprigs. Almost without trimming, hedge leaves from Aucuba of Japanese, cypress and cypressovka, Loch of narrow-mounted, Mojhevilnikov, Lavrovichny, etc. In such plants, only those sprigs that give them an unclear appearance are shortened.

In 2-3 years after landing, the living hedges are usually completely filled with sprigs from the bottom. From this time they need to allow growing up and maintaining needed species and form by limiting the growth of the side branches. Some plants require a strong haircut, others - weak. Some trees and shrubs require periodic haircuts from May to October. Until the plants reach the desired height, the side shoots are cut off strongly, and the growing up slightly pouch. Thus form, for example, bleeding from the tern, hawthorn, rocks, some types of honeysuckle and turquish.

Many plants require 2 haircuts per season: the first spend in July or August, the second - in October-March. Growing on the sides of the branch strongly, but growing up - only hanging. When the hedge reaches the required height, the upper part is also subjected to severe trimming. This group includes some barberries, beech, all kinds and varieties of the Kizylnik, some species of cypress, Japanese rebel, juniper, piracker, rosemary, snowy year, Tamarix, all kinds of teu, tees.

Subsequently, only one haircut may be required in the season, and maybe much more. For example, plants such as self-sewing and turquoine require the services of "hairdresser" every 5-6 weeks, as it is very quickly losing a neat look. Trim shoots better about 1 cm above the past cut. It is so prevented by the appearance of prophesin and the thickness of the hedge increases.

Before the procedure, it is recommended to apply the land along the green fence of the film - this will significantly simplify the cleaning of cropping. The growth of trees and shrubs can be slowed down if, attaching the necessary shape with scissors or a secaterator, pollimate them with special chemicals, braking development in height.

Continuing the topic of trimming decorative wood plants Consider today the question of haircut (for molded landings) and pruning (for freely growing) alive fences, in the care of which these "green operations" are very important points.

Why do you need a haircut of live elevations?

The haircut of the living ingreders is made to enhance the growth of side shoots, increasing the thickness of the crown, to obtain an even profile of the alive hedge.

How often do you need to cut a live elevation?

Harge Harge is carried out annually. In the first years, usually take a single haircut for the growing season in early spring or late autumn. In the future, the number of haircuts can be increased to 2-3 or more, depending on the rapid growth rate. With 2 haircuts per year, re-produced in June-July (at the same time the hedge increases height much faster than with a single haircut). Multiple haircuts are being taken during the summer as the new shoots are growing and the loss of clarity of the hedge lines defining its profile. The number of haircuts can be reduced by a chemical way with the Cutlass (ICI) preparation, which prevents the growth of young shoots and is applied after the first trimming.

Shrewing depth

The cutting depth increases as the growth and age of the hedge increases. Initially, it is 1/2 - 2/3 of the average length of shoots. As hedges approached, the haircut can be even more deep, up to leaving heights with a height of 1-2 cm.

Upon reaching a certain height, the top haircut is carried out constantly at the same level by removing the raised shoots.

Most gardeners with obvious reluctance cut the living hedges are not strong enough, removing only the ends of young shoots. As a result, it is a dense, high-livest fence after a few years acquires an unattractive look and saves. So that this does not happen, the hedge should be trimmed as close as possible to last year's trimming. It will keep their shape and density, and also prevents breakdown of plants after heavy snowfalls.

How to cut the launched live fence and nuances of a haircut of the living fence of a different profile, see here.

Haircut of old live swelling in 2 reception

Rejuvenating trimming can be applied not only to launched hedges. It is resorted to it in the case when the hedge has come, ceased to be decorative and perform a protective function. Since it takes a lot of strength to restore the shape of the plant, it is better to carry out rejuvenation in two receptions. In the first year, only one side of the hedge is cut off, cutting off the branches at the distance of the width of the palm from the trunk. The other side is cut off as usual, and the next year it is rejuvenated in the same way as the first. Simultaneously with the trimming of the plant, it is necessary to help how to help, pour and inspire the soil so that they can quickly recover. In urgent cases, pruning can be carried out simultaneously on both sides.

What to cut?

(See here).

In order to obtain the same haircut profile along the entire length of the living hedge, it is made according to the stretched cords or use the template corresponding to the desired outline of the cross section of the hedge. When having a haircut relatively high living ingreders use benches moving along them as work performed, with a haircut of living walls - stairs.

In the next video, you will hear a lot practical SovietsHow to cut the living hedges of flowering and flaky shrubs, and you can also see the process with your own eyes.

Pruning freely growing alive hedges

Freely growing living hedges are impossible. They use a sanitary, stimulating, light imaging trimming. Removal of dry, old, weak, thickening crown branches is especially important for beautiful and fruit and fruit plants.

It should be borne in mind that the generative kidneys in these species are laid on shoots of different ages: in some - of the current year (roses, Buddudrey, Spirey), from others - the previous one (Henomelles, hawthorn, cherry, apple tree, forzition). In order to obtain abundant flowering, the pruning of such plants is produced according to them biological features: The first group - before flowering, the second - after it. For getting good harvest Fruit plants cut to flowering.

Cut leaves and shoots must be carefully assembled and burned (if it does not have a special purpose), because They can be sources of propagation of pests and diseases.

- Decoration of any site. However, such a decoration requires regular maintenance of its kind, that is, a haircut of a living hedge is a systematic and mandatory operation for each gardener. It is necessary not only to maintain the shape of the shrub crown, but also for better growth and health of the plant. Therefore, you should be able to spend it with my own hands should every gardener-amateur, and professional - especially.

The haircut of the living hedge depends on the age and type of plant, season and from many other factors.

Let us dwell on the fundamental: you can only cut the cutter and only so as not to interfere with flowering, do not overlook the lower part of the design and do not spoil the shape of the leaves. These are the main criteria that apply absolutely to all structures and violate which is not worth it, otherwise the health of the plants may be at risk.

Live fence is furious and informed (free-frequency). In addition, they distinguish fences and height:

• low (so-called borders, up to 0.5 m height);
• medium (0.5-1 m);
• high (1-2 m);
• walls (over 2 m).

In the free-growing fence, natural features of plants are preserved in their natural form. Folded hedge is devoid of individuality of each separate elementAll plants in it are littered with a certain, not natural and natural, but a geometric or other form. Live fence may consist of deciduous and coniferous rocks. In each case, the haircut has its own characteristics. The haircut tool, depending on the length, height, age and composition of the hedge, can act:

Shrub shrub circuit Live hedge: A, B, B is correct; r, d - wrong.

• secator;
• special scissors;
• costort;
• chainsaw.

The secret and garden scissors are best suitable for young small hedges, since they are less injured plants and provide care. More mature or long fences are cut with electrical scissors, bushodezes, chainsaw. In this case, it is important that the blades are evenly sharpened, otherwise it is possible to injure and split the ends of the branches. To be smoothly, the haircut is carried out on a stretched cord or a special bright color wire frame.

Back to the category

Stages of cutting branches

New-pop hedges of young plants should be cut every year. Usually, the haircut is carried out in early spring or late autumn.In the future, depending on the actual need, the number of haircuts is communicated to 2-3 times a year. The first trimming usually happens the next season after landing. But if the plants planted in the spring, it can be cut in the end of autumn. Stages of the haircut:

• pruning plants;
• formation of living hedges.

The weakly shaped crown in plants is cut into half the length. If the branches of mature plants are well formed, then a third of their length is cut. The incision is made oblique, it is desirable for the resulting kidney in mature plants. Fraging the plants in this case is inappropriate, since insufficient circumcision of the branches is fraught with the possibility of breaking overgrowns, degradation of individual sections of the fence, incurability of growth. Repair such missions will help only trimming on the stump and years of waiting. Therefore, it is necessary to cut the hedge, confidently, without fear, but without fanaticism. Proper trimming will provide a thick growth of vegetation and larger foliage that reliably protects your pricework from wind, curious eyes, dogs and strangers. It is almost impossible to overcome a well-formed alive hedge without special tools.

Back to the category

Forming a live fence

When the branches are shortened, it is time to begin to form - the impression of the desired profile and increase the thickness of the branches. Most often, this is a correct rectangular shape with flat peaks and sides. The fact is that this form The most simple, to form it even a novice gardener can. It is easier in support and care and optimal for high wall thickets. The only nuance for rectangular form is a recommendation that the height height has exceeded the width. It is necessary so that the bottom shoots do not have a shortage of sunlight and did not die. Also branches from the sides need to cut more deeply than the vertices branches.

Other popular haircut forms: trapezoidal or rounded, when the base thickets is much wider than the vertices. This allows plants at all levels of badges to receive sunlight and actively develop, while maintaining beautiful and well-groomed appearance. For mature plants, timely haircut is needed not only in decorative and preventive purposes, but also in sanitary. The trimming of old and weak, dry or affected by pests of the branches helps to preserve the health of the entire fence.

The haircut is also useful as a rejuvenating agent if the hedge has lost its decorativeness. In this case, circumcision is carried out in two stages: in the first year, the deep haircut is made only on one side of the hedge at a distance of 10 cm from the barrel, the other side should be cut the next year. After any haircut, sanitary, rejuvenating or annual, it is recommended to hide the hedge abundantly, to fertilize and cover the soil under it peat, bevelled grass or bark of trees. It will contribute to a faster plant restoration, their good nutrition and growth. When the hedge is fully formed in height and form, it has to cut it much more often, since even a slight reflection of the branches spoils the hedge profile.

You can cut the hedge using stretched wire cords in order to maximize the shape. However, special frameworks are much more convenient. For the formed alive hedge, the correct compliance with the form is unusually relevant. Usually, the height of the haircut is increased annually by 4-6 cm until the specified level of height is reached. All the above recommendations are common, but individual breeds have their own haircut nuances.