Make a greenhouse from window frames with your own hands. Greenhouse from old window frames

28.03.2019 Fruit and berry crops for the garden

How to make a greenhouse do it yourself from old window Rams?

The rationality in the presence of greenhouses for vegetables on the plot is clear to many. Short summer season Sometimes accompanied by cool weather and protracted rains. However, the desire to get good harvest, regardless climatic conditions, Surrounded by all summer houses. In addition, the forces that you spend on the care of plants should be justified by an effective result. Properly organized greenhouse is able to accumulate heat and maintain the desired microclimate inside the space.

Part of people are addressed to create a greenhouse to those skilled in the art, the rest are boldly taken for business and build a design with their own hands. With independent performance, other technologies are also used. However, such a greenhouse from old frames is considered the easiest option, it is enough to build it enough. Glass in its properties is better suited than the film for greenhouses with vegetable crops. It not only allows the sun's rays to penetrate the greenhouse better, but also retains it longer inside.

Important moments for construction

Let us dwell on some details that it is important to know to build a greenhouse from old wooden beams right:

In addition to suitable place For construction in the country area, greenhouse dimensions also determine the size of the existing old window frames;
If you need a reliable design, which is designed for long exploitation, it is better to make a carcass of the greenhouse capital. An excellent option to create a solid foundation will be brickwork. The roof for the greenhouse can be made by a separate removable element that is dismantled for the period of winter and snow loads. If the brick version of the frame is not suitable for you, you can build a base using boards;
When building a greenhouse from unnecessary old windows, the upper part of the frame can be done with one or two slopes. For inclination of the roof in both directions you need to pre-lay the skate beam in the middle. If a single-sided greenhouse is planned, its location should contribute to the maximum sun coming during the day. Such a condition is favorable at the state of plants;
In case the old windows are much, it is better to fulfill the entire frame of all of them, because such greenhouses from the frames pass much more light, contributing to active development vegetable crops In the period of growth. However, it is necessary to be attentive to not damage the integrity of the mounted glasses in the side part;
Do not forget that your structure should be hermetically. In addition, the greenhouse assembly requires accuracy and accuracy, you still need to take care of eliminating the slots between the elements. You can fill the seams with your own hands using sealants and special smeasters. The better space from the inside will be isolated, the better for plants;
Provide several backups that are able to maintain window frames at a time when you need to work in a greenhouse, causing vegetable crops;
Place for a greenhouse from old window elements, choose the most unlightened. It is desirable that water supply to the structure for a convenient watering is provided. An excellent option is to build a greenhouse, connecting it with another existing capital construction;
If the frame is made of wood, take care of the protection of the design from the rotation process. Before mounting the frame, you must first over the perimeter to distribute the runneroid, and the lower part of the reference structure from the boards to impregnate the resin. Subject to these measures, the base of the greenhouse from the window elements will serve for a long time;
In order for the life of a greenhouse from old wooden beams to be obviously impressive, it is better to build a brick base for a skeleton support.

Consecutive steps during construction

Preparatory stage:

Measure all the window frames that you have. Most often, elements of old frames differ from each other in dimensions;
Knowing sizes, you can understand how the distribution of elements on the frame is the most optimal. If all elements for the greenhouse are the same, difficulties in their distribution will be minimal;
Fix your decision after calculations in the drawing, at least schematically. Thus, you do not have to do the same work several times, remembering the final version. In the drawing fix entrance door And places allotted for beds, mark the distances between them. Do not forget to make a handle. Most often, the passage is 800-1000 mm.

Next, consider the main stages of the construction of a greenhouse with your own hands.

Determine the optimal place

It is necessary to fit very closely to the choice, since the competent placement of the greenhouse on the site is one of the main components of a successful harvest. In order for the sun to warm the soil of greenhouses from window frames as long as possible, select the site, next to which there will be no high shrubs and trees. It is also desirable to retire from the buildings on the site, which discard the impressive shadow. Square for the greenhouse should be protected from drafts caused by the wind.

The land plot for a greenhouse must be even. Landmark for placement of construction - from north to south. Choose loose soil for plant installation. Avoid the proximity of groundwater when placing the design, it is better that the soil be moderately dry.

Mount the base with your own hands

The foundation for a greenhouse from old frames is quite simple to build, since this construction does not create a special pressure on the basis. The foundation may be a ribbon, for this, around the perimeter, the greenhouses arrange a deepening in the ground and poured it with a concrete mixture. Also, the base is performed from bricks and wood. The brick and concrete version are more durable.

There is a base of metal, it is also used for the carcass greenhouses from window elements. Such foundation is mounted strictly under the support pillars.

The main requirement for organizing the foundation for a greenhouse from window frames with your own hands is a matching level. Control this parameter with a special device.

We prepare window frames

This stage implies a dismantling of elements of frames of unnecessary parts: fasteners, loops, window handles, etc. Next, sand the surface of the frames, remove the old layer of paint. If these conditions are met, the new paint will be distributed evenly and forms a reliable protective layer that prevents the process of rotting. Additional treatment of wood from rodents will not be an excessive event.

Mount the frame with your own hands

Before installing window frames from wood, you need to build a frame for a future greenhouse. Its construction does not represent much difficulty, it is necessary to be guided by the size of the drawing, during the preparation of bars the necessary dimension. The assembly of elements among themselves is carried out by means of special screws and nails.

Fastening elements to frame design

In order for the construction to be sustainable and served for many years, the installation of the frames is better to carry out with the help of screws and self-tapping screws. These fasteners are not more reliable than nails, however, they are able to reduce the likelihood of glass damage. Space between elements close by sealants or mounting foam, depending on the size of the gaps. Thus, in the greenhouse will be observed the necessary conditions Sealed space.

Roof construction

The best option is the two-tie roof with a skate bar, arranged along the greenhouse. So you correctly organize the removal of rain and melt water into the waste pipe. The material is better not to apply for the roof of the greenhouse, choose the lighter material. Excellent solution The roof of polycarbonate will become, its value on the downhole of the greenhouse design is quite acceptable.

The list of materials that can be used for the manufacture of a greenhouse is not limited to polyethylene film and polycarbonate. Mini-greenhouses are collected even from window frames that are cheap and serve not one year. Any gardener can boldly begin the manufacture of a glass greenhouse, who at least once with his own hands built a little greenhouse.

Pros and cons of window frames as a material for a greenhouse

The window frames used as raw materials for the construction of mini greenhouses are assessed positively because:

through the glass passes ultraviolet rays, as a result of which the plants grow rapidly and give fruit;
the design of glass holds inside the required amount of heat;
glass coating is much easier to purify from dirt than film material;
the cracked glass can be easily replaced, and the torn film is not.

The disadvantages of such a greenhouse are considered:

the need to put it on the foundation;
high risk of glass damage to hail or other beetles of weather;
creating inside the design of the overall hot microclimate (if the greenhouse is not ventilated by the opening of the window), which is why plants may be yellowed.

Photo Gallery: Greenhouse options from window frames

Each window frame looms freely when it is required to ventilate a greenhouse
Two long window frames were used to create a greenhouse In the greenhouse of a small height, it is better to plant cabbage seedlings Plants in the greenhouse are planted on a layer of manure and fertilized soil Greenhouse can be created easily and from the minimum amount of materials

Drawings and sizes

If the gardener decided to make a greenhouse from window frames, then it usually considers two design options. The first one can imagine as a small and low house with a single-sided roof, and the second is like a small structure with a roof in two slope.

Greenhouses are created so that water is not delayed on their roof

These greenhouses have the same length and height. Only the width is distinguished from each other. The second greenhouse, the top of which is not covered with one, but two window frames, more spacious. But it will take more materials and construction skills for its construction.

Therefore, the hosts of the gardens prefer to build a greenhouse in the form of a house with a single roof. If you plan to plant high plants in mini-greenhouse, for example, tomatoes, then the height of a lower side wall should be increased to 40 cm.

Greenhouse frame made up of vertically installed boards

If you wish, you can make an in-depth greenhouse covered with glass frame. Such a mini-greenhouse will allow you to quickly grow vegetables in early spring.

The in-depth greenhouse is suitable for gardens that want to get large fruits of vegetables

To create an in-depth greenhouse in the ground, the pit is pulled out with a depth of 75 cm. It is laid by manure and a fertilized land. On top of the created ridges, the window frame is layered with a size of 160 × 106 cm mounted on the bubble.

South and North Puben - Materials for the manufacture of an in-depth greenhouse

Glass greenhouse can be built from one long or several window frames. Most. optimal option It is considered a rectangular frame with large stalks, because it will give plants more light. Although there are no special criteria for the choice of this building raw materials. The main thing is that the glass is integer, and the frame tree is not rotten.

To create a greenhouse, it is preferable to take large window frames

To create mini greenhouses, windows remaining after repair. You can find the used windows through an ad in a newspaper or in an enterprise that dismantles the old wooden frames and puts plastic double-glazed windows in their place.

All frames taken as building raw materials for the construction of a greenhouse must be absolutely the same. When using different wooden windows, it will not be possible to make a greenhouse with hermetic, because the frames will not fit tightly to each other.

It is advisable to find window frames with forms. They will avoine a greenhouse, without raising his glass roof.

Fortochka window frame used for the construction of a greenhouse will become a vent

Window frames are recommended to prepare for further operation as a greenhouse material. This implies the replacement of broken and rotten parts, as well as disassembling the handles, scores and unnecessary fittings. Wooden elements of window frames are required to sprinkle with an antiseptic, which slows down the process of damage to wood under the influence of precipitation.

Materials and tools

To implement the idea of \u200b\u200bcreating a greenhouse from window frames, you need to find the following materials:

concrete solution;
bricks;
Three thick boards;
2 thick boards;
6 cream trimming;
2 thick boards in the form of a rectangular triangle;
one long window frame.

During the construction of a greenhouse, the material for the foundation, frame and roofs will be needed.

A mini-greenhouse should be collected from these parts with:

loops;
nails;
self-tapping screws;
screwdriver;
door handle.

We build a greenhouse from window frames with your own hands - Rogshagovaya Manufacturing Guide

The greenhouse falls into several actions:

Video: Beauties to build a greenhouse from glass frames

Greenhouse in the country - the necessary structure. It is built from a small amount of materials and accounted for the gardener of cheap. You can save even more on the manufacture of a greenhouse if instead of film and arc use window frames. Of these, it will be possible to build a mini-greenhouse that easily opens and is distinguished by a good microclimate.

Our climate is changeable, strongly depends on the time of year, so some plants do not affect or give a weak harvest. To fight this, people came up with greenhouses and greenhouses. With their help in some cases, it is possible to receive a harvest even in winter or collect two harvest for the year.

Materials used for greenhouses

What is the difference between the greenhouse? Is he greenhouse? Mainly sizes. A man itself comes to the greenhouse itself, and in the greenhouse there are only plants.

Despite the fact that the industry offers various designs of greenhouses, many will want to save and make their facilities from girlfriend. Below will be told about it.

Stages of eating their own greenhouses:

collecting material (frames) for greenhouse;
selection of places for greenhouse;
choice of greenhouse design;
installation of the foundation;
walling;
crossing the roof.

During the construction of professional greenhouses developed in institutions, study which materials it is better to use. Here they pay attention to the translucent material of the material, which rays the material is passing, and which absorbs and the like. However, in private farms, the material is not particularly accounted for.

Polycarbonate is best suited, but it costs quite expensive. More accessible are glass frames. The fact is that people from time to time make repairs in their apartments, while they often change windows, throwing out old frames on the landfill.

Glass in the frames is very well suited for greenhouses, before it was done from it. The lack of glass is that it can crash. In small farms, this risk is reduced.

The film is also often used for greenhouses and greenhouses, but it is short-lived.

What is the window frames

For the greenhouse you will need quite a few frames, therefore, most likely, they will not coincide in size. This must be considered. In addition, the frames may be without a glass or a damaged frame. In the first case, instead of glass, you can mount something else in the frame, for example a film. In the second case, the defect is easiest to close the mounting foam. Mounting foam is useful and in the case when it is necessary to close large slots.

The frames themselves are today wooden. It is just very good, as the tree is easily mounted - the frames can be simply knocked down or nailed to a single rail. In the future, we can expect the appearance of plastic and metal frames. Installation of such frames is somewhat different than wooden, but also is easy. The metal in the frames is most likely thin, so the screw is suitable for the attachment.

A feature of the frames with the inserted stalks is that the glass in the frame is moving freely. That is, the expansions due to temperature fluctuations glass is not afraid.

Selection of places

Here is the illumination of the construction. In addition, it is possible to turn the design itself relative to the sun in the most acceptable way. Otherwise, the owner's taste.

In some cases, the greenhouse is attached to the house wall, it turns out something like a winter garden. Lighting in this case is less than in a separate building (because light penetrates not from all sides). However, there are also its advantages. The greenhouse protects the construction from external influences, gets heat from home and itself prevents heat leakage.

The greenhouse should be such that you go freely in it. Most often they are made rectangular with the calculation of the width of the bed. Usually in the middle there is a path, according to which a person walks, and on both sides of the path there is two beds or dual beds. It's comfortable.

To save material, greenhouses are sometimes made in the form of a semicircle, if you look at the front. However, not to build such a design. If you do from them, then it is most likely a rectangular parallelepiped, on top of which the roof is mounted.

Some developers of greenhouses pay attention to the need to ventilate the greenhouse, for which the vehicles are made. The need for this exists. If you want to control the microclimate, then you will make a greenhouse of hermetic with the possibility of adjustable ventilation. Otherwise, it is better to do not pay much attention to the tightness, that is, the small cracks leave.

It should be understood that the warmth is going under the roof. For more uniform warming up, there should be a high height or good ventilation. On the other hand, the smaller the volume of the room, the better it is warming up. Since the weather is different, you will not achieve the perfect design. Be sure to pride the ventilation. For this purpose, you can make two entrances to the greenhouse opposite each other (from the ends).

Additionally, it is possible to provide heat heating. Here you need to proceed from your wishes.

Step-by-step guide construction design

Foundation

The foundation is usually installed under the capital design. At the same time, the depth of its embezzlement reaches one and a half meters (or more), which is due to the depth of the primer of the soil. The objective task in this case is to avoid under the influence of cold temperatures of the soil beam under the walls of the house.

In the case of a greenhouse, it is not necessary to establish a deep foundation of necessity, since the design is light and flexible. In this case, the appointment of the foundation is to isolate the wood frames from dampness and land.

Walling

As a rule, the frames are wooden. Often they come dual. Such frames must be disassembled into two, because Greenhouses are made in one layer of glass. Also, these structures usually have a bevel. So that it does not interfere with the docking frame, they are deployed in the right way.

You can simply knock down the wooden frame with nails. But if more capital design is required, then all frames of one side are attached to a single bar (rake, etc.). The bar must be mounted on top and bottom. You can still attach in the middle. If it goes inside the greenhouse, then the stalks of plants can be tied to it.

Instead of nails, it is better to use selflessness for wood. So less risk that the glass breaks down, and it is easier to attach a harping design.

When plastic windows Self-tapping screws and bolts. If you are creating plastic to bar, then you can score a nail. But the hole for him will have to do in advance.

If the metal frames are most likely thin steel or thin aluminum. Material like an aluminum profile, but may be thicker. If the thickness is large, then you will have to drill holes. For metal, self-tapping screws have a smaller step than for wood.

The most convenient material is wooden frames. And they are easier, if you have to, and reliable fasteners.

Methies

Hardware is fasteners. Currently, in stores you can find steel corners and plates of different shapes. All of them with holes for nails (self-tapping and the like). In some cases, they are very convenient and well replaced with other types of compounds.

If the connection is complex and the tree (joint) can not be adjusted, it is better to use steel hardware.

Crossing the roof

The roof is optional to do from the frames. The fact is that the glass is still fragile material. It can be installed vertically, it will last long and the danger does not represent. In the case of the roof there is always a danger that Grad will go such that it can break the glass. There is also a danger that a lot of snow will gather on the roof, which will produce glass.

An undesirable roof to do from film or glass. The glass is dangerous, may fall on the head, so it is extremely not desirable to make the roof of the roof of the glass. If you make a roof with the use of film, then, most likely, it will last no more than the season.

The roofs for greenhouses are made either directly (usually double) or semicircular. If you distract from hail, then for double roofs The frames are suitable. On top of such a roof, the horse is mounted so that the water is not going on top. Cracker is an area that covers the very top. Traditionally, the roofs face the wall plane. This is the right decision in case of winter - the icicles will not crawl along the walls. The film can be attached to a semicircular roof.

You saved on the walls, for the same roof you can use polycarbonate. Polycarbonate allows you to make a roof and straight, and semicircular. In addition, it is quite rigid and light, so requires a minimum of a frame. This material is not beating and is good for the roof.

Wooden frames are excellent material for the construction of the walls of the greenhouse. It will come to you completely free. Greenhouse from such frames can be collected per day. However, it is desirable to use polycarbonate for the roof.

In contact with

September 17, 2016
Specialization: a professional approach to architecture, design and construction of private houses and cottages, new products in the market of building materials and finishes. Hobbies: Growing fruit trees and roses. Breeding rabbits of meat and decorative rocks.

Everyone knows the problem with the former in the use of construction materials. Where to give old wooden window frames, if in the whole house or in the apartment put metalplastic? If there country cottage area, then mini greenhouse from the windows is the excellent application of this material.

On average, a new greenhouse from polycarbonate area 20 square meters It will cost from 15 to 25 thousand rubles. A greenhouse from old windows will cost a maximum of five thousand, given the costs of the foundation and the purchase of new boards for the frame.

Optional to erect the monumental structure, you can limit the mini greenhouse. How to build such a greenhouse with your own hands? I offer two alternative methods.

Choosing a place to build a greenhouse

In the photo - Mini Greenhouse, Frame Rama on top of the skate, slope of at least 40 degrees

We build a greenhouse on a well-lit open placeSo that the trees and buildings do not give shadow. If the plot is small, then focus in such a way that the morning and daytime sun illuminated a greenhouse, and you can donate evening sunny rays.

In the length, we have a greenhouse from the east to the west. In this case, the sun will come to plants evenly during the day, the sprouts will not be curved.

If we build a small greenhouse without a ribbon basement device, then the humidity of the soil does not take into account. But when the greenhouse is arranged 20 meters square and more, this is when the frames are many, the foundation must be placed on a dry place.

Greenhouse size and foundation device

Even shallow ribbon foundation Under the greenhouse, it is necessary to build in the place where there is no close occurrence of groundwater. I have on the plot in two places at the depth of one and a half already the ground is wet, and there before the house was standing. So in this old house was constantly raw. Wet, the foundation gradually collapses.

We choose a dry area, preferably with soil from the chernozem, under which there is a layer of sand. It is clear that not all of us are happy owners of fertile lands. Because if the soil is clay, then for the greenhouse it will be necessary to prepare the soil before building the foundation.

Under the greenhouse requires a certain composition of the soil:

The bottom layer - gravel or crushed stone is a drainage that will skip excess water and will give the roots of the plants to breathe and prevents posting.
Next, a layer of sand is needed - all plants love light soils at the rustic root, which allow a thin growing root to form and grow freely.
Only the last, the upper layer should be fertile. This is a layer of chernozem, enriched with humus, pre-prepared by a compost from leaves or complex mineral fertilizer (nitroammophos).

Greenhouse size

A small greenhouse with their own hands from old window frames in the foundation device does not need. A frame of boards or timber can be put right on the ground.

So that the boards are not discharged, the lower axle must be treated with a protective primer on a tree or squeeze. Ruberoid is also suitable for which the lower square of the frame and the rack is turned around, in the height of approximately Santimeters 50 above the ground level.

the most comfortable beds - one meter wide, they are easy to handle from both sides;
the walkway between the beds make such a width so that it was convenient to move. If it is not planned to use a garden car, the optimal width of the track is half meter;
the optimal width of the greenhouse is four meters. Three beds and two tracks are placed here. Loss of arbitrary.

You can plan a future greenhouse pre-on paper. Make a drawing - a couple of minutes, but it will help to navigate in the desired number of frames and boards, and optimally smash the desired number of beds and tracks.

Fundament device

The foundation is necessary for a large greenhouse, as the mass of frames with glasses is rather big. A greenhouse from the window frames is installed with their own hands on a shallow (50 - 60 centimeters) ribbon foundation, since the frame under the weight of the frames can give shrinkage and the design is deformed.

for a pattern of 10 square meters, the foundation on the posts is suitable. The calculation of the number of columns is carried out on the basis of the number of window frames. Ideally, each frame should rely on two columns;
you can make a foundation from concrete, bricks or use the finished weld metal frame;
It is important to remember that the brickwork without a foundation with time "rides", and it is impossible to plunge it into the soil. Therefore, under brick columns, it is still necessary to fill the base of concrete.
in regions with strong frosts, it is worth using the natural warmth of the soil. Therefore, the greenhouse is plugged into the ground about half a meter or meter, depends on the depth of the launch of the Earth in winter;
simple ribbon foundation flooded by normal scheme: trench, formwork from boards, fill concrete, frozen, removal of formwork.

The foundation is required before installing the frame to cover the rubberoid. This will help to additionally protect the wooden framework details from dampness.

Much more convenient welded frame. Why? For the reason that, if desired, the greenhouse can be transferred to another place. If you fill the foundation, then this is a stationary building.

I think you will be interested, there is information regarding the assessment of the country site. So - when assessing real estate on the site, all covered buildings on the foundation are included in the general economic area for which the tax should be paid. Therefore, it is cheaper to cook the frame foundation for a greenhouse, which is easy to disassemble before the arrival of the assessment commission.

Mounting frame for frames

Before making a greenhouse from window frames, all wooden parts should be treated with deep penetration primer, as well as paint wood. It will keep it from rotting. All the old frames carefully cleaned the paint and fit the details so that there are no cracks.

Do not clean the windows and loops, they will be useful for installation and subsequent ventilating greenhouses in summer time. If the frames are different in size, then they group them in such a way as to less high on the ends of the greenhouse, and the higher closed the long part of it.

On the sides will be installed the doors and you can sunmatch the missing height of the boards, but the length is better to be solid.

For the framework of the frame, the bar is quite suitable for the 50x50 or unedged board, the thickness is 40 - 50 mm, no longer needed, as the weight of the entire structure increases. The board for the island is preferable, since its width allows you to securely secure the frames on the self-tapping screw, and give our base additional rigidity.

Frame elements:

Lower strapping - dimensions around the perimeter of the foundation. Brussia can be copped with metal corners on self-drawing, and not nails, it is more reliable. If the strapping is performed from the board, then to give stiffness in length, you can install another or two boards.
Racks are attached vertically to the bottom strapping. They are mounted in the corners, in length and on the sides with a step equal to the width of the window frames selected for the greenhouse. The racks for one row should be lower than differently - for 40 degrees. Distribution at the height of the racks - 30 centimeters.
The top strapping is the base for the roof. Greenhouse Window from Ram must have an angle of a skate of at least 40 degrees so that the water is calmly flowed and accumulated in the film.
Double roof on such a structure is impractical. The roof is suitable in one slut. In order for the film to be securely secured, the step between the roof rails should be no more than 60 cm. For the roof you can use guides for drywall. They are lungs and very simply attach to the tree with self-draws.

We spend the whole fasteners only on the tapping screws. Mounting with nails during operation does not withstand critics, a year later, the whole design will be fused in the wind.

Fastening frames to frame

There are some important nuancesthat need to be taken into account when fixing the frames to the finished carcass:

Mounting step by self-drawing 25 - 30 centimeters, not less.
Shakes between frames must be sealing. Suitable mounting foam or ordinary shirt for windows. Additionally, you can pave a thermal tape or rubber seal.
For reliability outside the frame, too, it is necessary to attach with self-draws, here a step may be more than 40 - 50 cm.
For reliability from the inside, the frame can be fixed on the bottom board. Krepim is also on the wood screw.

If old frames are a bit, then the northern side of the greenhouse can be seed or thick. But Faneur must be painted, as it is very quickly coming in disrepair from rain and snow.

Installation of roofing

Roof material - dense polyethylene film For greenhouses or polycarbonate. The glazing of the roof is an ungrateful matter. Grad, heavy rain or squall and have to change glazing, and the price of glass is now rather big.

Minus films - for the winter, this canopy will have to be removed, and reliability leaves much to be desired. Dignity - a single roof is suitable, less work and consumption of building materials. The step of the crate under the film is not more than 40 m, as it saves and rainwater accumulates in it.
Polycarbonate is more expensive than the film, but this is a more reliable option, moreover, it allows you to install arched roof.

A homemade greenhouse of small sizes is better to cover with the film, it is not difficult to remove it for the winter.

Montage of a row roof frame

The order of work is as follows:

By the length, we mount two bearing timber, they will be attached to the roof rafters.
To the upper strapping, secrets, depending on the greenhouse length from three to six pieces.
It is important to determine the angle of inclination of the rafter, it must be the same.
Slinged by mounting to the bearing brusche with vertical columns (farms).
Further, on the rafters, we apply a crate from the ridges for fastening the roof coating. For polycarbonate, the step of the rails of 60 - 80 centimeters, for the film 40 - 50 cm.
On the crate crepaim the roof. Film is desirable to fix with thin rails to rafyles, for reliability.

That's all, our greenhouse is ready, you can bring water and install electrics and lighting.

Summary

In the video presented in this article, you can see the entire process of building a greenhouse from old window frames. If readers have some interesting offers and innovations, I invite you to discuss them in the comments.

September 17, 2016.

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!

How many necessary things people simply thrown into a landfill, not understanding the value of some things. To take at least old car tires - you can make a remarkably beautiful flower bed, with your own hands, it was written in the article "".

Today in the store you can find a large range of greenhouses for your household economy, but the prices of them are not the most democratic. Not every gardener can afford such a luxury.

In our time, many are changing wooden frames of houses on new plastic. Old frames, as a rule, thrown into a landfill, not understanding what kind of valuable construction material! From old window frames, you can easily make an excellent greenhouse for your site with your own hands. According to its qualities, she will not give up anything purchased in the Polycarbonate store. In this article we will tell you how to make a greenhouse from the frames do it yourself.

Greenhouse is a very useful tool for successful cultivation Vegetables. In the greenhouse, you can land seedlings when the street has not yet been established stable warm Temperature air. Stew in older wooden Lamps Help keep the right air temperature and lighting mode. The vents can serve as vents that are built into the frame. Construction of such a structure The case is very not difficult and cheap, it is important to know the steps of work and have a material at hand.

Greenhouse from Ram: Stages of construction

Before starting the construction of the greenhouse, you need to measure the frames that you have in stock. The fact is that they often differ from each other. Then you need to think about this option to install the frames that will be the most optimal. To do this, you will need to fit all the frames. The easiest option is to take the frames of the same height and width.

Measuring the width of the frames, you will need to determine which width will be a greenhouse. Be sure to draw a drawing or at least a scheme of the future greenhouse, it is much simplifying your work in the future. In the drawing, it will be advisable to designate the place to enter, as well as the location of the beds and the passages inside. Usually, they come from such a calculation: the beds make 1 meter wide, and the passage of 80-100 centimeters.

Choosing a place

It is very responsible to approach the choice of places of greenhouse. You need to choose a large smooth land plot that is well covered sunlight. It should be taken into account that the place is well protected from a strong wind to protect the future greenhouse from possible drafts.

Nearby should not be large trees and high buildings, as it will create shading. The greenhouse at the selected place is placed in such a way that it is located from the north to south.

Now a few words about the soil. It is best to choose a plot with loose soil so that it is not close to groundwater and the earth was relatively dry. Even the soil with a small layer of sand is allowed.

Building foundation

Build a foundation for the greenhouse is very simple, so the greenhouse is very easy.

For example, you can dig a shallow trench around the perimeter of the greenhouse, and pour concrete. Such a foundation is very reliable and long serve you.

And you can buy a metal foundation in the store. It is installed only under the most supporting columns.

The foundation should be made by level so that everything is exactly.

Preparation frame for greenhouse

Before installing the greenhouses you need to pre-prepare frames. From all the frames it is necessary to remove everything too much: loops, handles, etc. Then, with the help of the skin, you should remove the old layer of paint. It is necessary in order for the new layer of Lög Rivne. It is necessary to paint the frame to prevent the premature rotting of wooden frames.

You can also process the frames with a special tool that scares rodents.

Making framework

For future greenhouses need to be done wooden frame. It is done very simply, according to the drawing. A bar is taken and scolded the desired length.

Bromes are mounted with nails or screws.

Installation of window frames to frame

For fastening the frames to the skeleton itself, it is best to use selflessness or screws. This does not mean that they are reliable to nails. However, when you clog nails, there is a chance to break the glass.

After installation, you will have several slots, they will need to be built by mounting foam. So there will be no drafts in the greenhouse.

Roof greenhouse

It is best to make a roof of a greenhouse with a skate. It will provide the best flow of water. For the roof, it is better not to use frames. For these purposes it will be light material, for example, polycarbonate. On the roof of the greenhouse it will cost not expensive.

You can cover the roof with multiple layers of the film.

The roof should be done in such a way as to ensure the unobstructed flow of water.

After building, the greenhouse remains only to equip it inside - to build a bed, shelves, racks, etc.