In this article, we will respond to a frequently asked question in the construction and finishing area: what better plasterboard Or plaster? Everyone has their own opinion on this subject, however, assessing the answers of experts and just amateur builders, we have formed some thoughts about this. To begin with, let's consider "for" and "against" the finished materials.

Pros and cons of materials

Plasterboard is a very popular material, both in the West and East. However, good specialistswhich truly know how to create miracles with drywalls much more than Masters-plaschers. But also cement-sand plaster https://profmarket74.ru/smesi/shtukaturnye-smesi/ has the right to life, she has many fans, it is no less in demand. Is it connected somehow with its wonderful properties or with the fact that some customers and performers have a conservative view of repair work?

Plasterboard

Spearly plasterboard is called dry plaster from the gypsum, which is included in its composition. Today, he is the leader in the field of building materials in the United States and Europe. Proper work With it will provide your walls an ideal-smooth surface that is perfect for the finishing finish of any kind.

Plasterboard is a sheet, inside of which plaster is located, its external layer - cardboard. The material is designed to finish the ceilings and walls from the inside of the room. In addition, the sheet can be used to create wall or ceiling structures inside the house, it is important only that the humidity in the house is at a normal level - the increased indicator does not affect the plasterboard structures.

However, this problem is solved - there is a special moisture resistant plasterboard, which is used in rooms with high humidity. However, if the humidity is too high, even moisture-resistant plasterboard must be replaced after five to seven years, its appearance will be completely not the one due to the constant impact of moisture.

Whatever plasterboard you have chosen, usual or moisture-resistant, it will become an excellent space for the incarnation of the most unusual fantasies. Alone or with a specialist from it you can create almost any designs and patterns.

Plasterboard is an excellent finishing material that in the hands of a talented wizard turns into clay, in the hands of the sculptor.

Now you can allocate the advantages of drywall:

• has excellent sound insulation indicators;
• finishing work using drywall - dry and without unnecessary dirt;
• it helps to create the most interesting designs on the ceiling and wall, due to the fact that it is easy and fine.
• walls from can "breathe" and absorb excess moisture;
• installation is much easier and faster than the decoration of the wall by plaster;
• between the wall and plasterboard can be placed insulation.

Minuses have little plasterboard:

• on the wall of plasterboard it is extremely unwanted to hang heavy items;
• the wall decoration is plasterboard is not the final stage, after decoration, the wall still needs to decorate or decorate in some other way. (This item is most likely not even minus of this material, but the specifics of working with it).

Plaster

Stucco - this is the view finishing work, and material. Nowadays, cement-sand plaster is often used for finishing work. Some types of plaster can be used as an finishing surface finish, which is very convenient if it is not allocated for repair too much time.

For many years, the plaster does not lose its relevance, properly applied, it is safe for health and durable

Plasters are different, most popular types:

• Normal. Widely used for internal and external work. It happens both improved and simple. Plastering can be given a moisture or sound absorbing effect with various additives;
• Decorative. This is a plaster of different colors into which various pigments and colors have been added.

Places may differ and thanks to the basis that may be non-aqueous or water.

In non-aqueous types there are polyuritans, they play the role of binding particles. Such types of plaster are in demand in all types of finishing work. These epoxy resins can be added, and if there are such additives, these compositions are used exclusively for internal work. In addition, the plaster on the non-aqueous basis is used to apply texture plaster.

If you are interested in the plaster, which you make your own hands, then you should know that it can be done on both water and non-aqueous basis. It all depends on your preferences and the desired result.

I also want to mention the dignity of plaster:

• If everything was done correctly, "on conscience", taking into account the technologies of application, then the walls decorated with plaster will not need to be repaired at least twenty-thirty years old.
• The cost of plaster is several times lower than the cost of drywall, but if you use the services of the Master-plaster, it will still have to work. But taking into account such expenses, the price of plaster will not be higher than the price of plasterboard, the maximum is the same costs.
• Well trimmed by plaster wall - shockproof, strong and reliable.
• On the wall covered with plaster, you can hang everything that your soul wishes: paintings, lamps, bedside tables, and how you remember, the drywall of high loads does not withstand.

If you are not sure about your abilities and have never come across the plastering process, it makes sense to turn to a professional. Otherwise you risk getting not neat and not a durable result

Like plasterboard, plaster has small disadvantages:

• The process of plastering is the "wet process", that is, there will be a lot of dirt, while the process of finishing with plasterboard - dry and clean. Sometimes this indicator is a decisive, both person, in the question, which is better - plasterboard or plaster, preferences first.
• Plastering - a long process, the experience of the employee and the quality of the surface that need to be plastered is playing a major role. With drywall, everything is easier - the installation is quite simple, the condition of the walls is practically no important, due to which everything happens faster.
• If the status of the walls is very bad - there will be a lot of plaster on her alignment.
• A person who has previously not engaged in such issues is unlikely to be able to do everything himself.

What specialists say

Plasterboard or plaster? - Provocative question, and I would not want to somehow allotten any other way to finish the premises, because each of them finds his admirer.

This method of finishes, like plaster, appeared for a very long time, much earlier than plasterboard, and remains incredibly popular today. The cement plaster is most often used, but as it turned out, it is better to use the plaster or lime for the premises. Gypsum can "breathe" better cement or limestone. It is ecologically cleaner, and this is very important for human health, especially if children are in the house. Cement is usually applied on facades, and not in residential buildings and premises C. high humidity.

What is the plasterboard? Gypsum, and this, as we have already spoken, environmentally friendly natural material, which does not affect human health with a negative way. Gypsum is covered with cardboard.

Plaster - without it sometimes nowhere!

Probably, this is one of the most popular issues related to finishing: what better plaster Or plasterboard on the walls? Each of these materials deserves attention, and each of them has its own characteristics.

Stucco is one of the oldest materials for finishing, known since ancient times. It is practically "classic" in the construction world, and still benefit. Therefore, we can safely say that such a finish is very relevant.

Plasterboard appeared not so long ago, but quickly won the big "army" of fans. It is convenient to use, copes well with his task, and in general adds new features for finishing. Thanks to these peculiarities, he became a worthy competitor to plaster, but could not displace it from the construction market.

So what is the main difference between them? What disadvantages, and what advantages have materials? Can I choose perfect option For walls in accordance with the price and quality? You will find answers to all these questions in this article.

Individual features of materials

To begin with more details, consider the plaster. At the moment, the mixture is most often used on the basis of cement-sand composition. Most species are used as black wall processing, smoothing and aligning the surface. But there are other varieties of mixtures intended for finish finish Walls.

Types of plaster

You can fly the walls by any of the types of mixture, depending on which result you want to get. Naturally, the finish species of plasters have a cheaper price, but for capital alignment of the walls are not suitable.

In general, all plaster can be divided into two main categories:

1. Decorative. Special segments that make it multicolored are added to such plaster. It looks very original, and opens wide expanses for creativity. It is also worth noting its special structure that allows you to create trimmed patterns. Plasterboard instead of plastering in this case is clearly not suitable.

1. Normal. It is mainly used for coarse, rough wall decorations both inside and outside. It can be in the form of ordinary composition and improved. Some special additives allow it to get a sound and moisture-absorbing effect.

Each species include multiple elements, including polyurethanes, which are linking link. Epoxy resins are also added, mainly for mixtures intended for interior decoration premises.

Noteworthy is the fact that the plaster can be made according to its preferences by choosing a water or non-aqueous basis. Of course, before you choose the basis, it is recommended to try several options. Therefore, plaster walls or drywall does not exclude an individual approach.

Of course, there is little different between the plasterboard, except with dimensions and thickness. But, there is another indicator that spends the edge between them - moisture resistance. The plasterboard itself is very much exposed to moisture, but thanks to special additives, it is capable of better to resist her.

Plastering or tinkering surface drywall - to solve only you, but to study these options definitely worth:

1. Normal. Standard View Plasterboard, which consists of a completely ordinary cardboard sheet, inside which is the plaster base. With it, you can separate not only the walls, but also the ceiling. You can also make individual walls, if you pre-put the framework. A serious disadvantage of the material is the fear of water, so it is categorically not recommended to install in rooms with high humidity.

1. Specialized. It is not surprising that for such a period of time since its appearance, manufacturers have found a way to make moisture-resistant plasterboard. In contrast to the usual view, it takes a high level of humidity much better.
   But despite this, it must be replaced in 5-7 years, since it loses its initial look. There are also refractory drywall, his name speaks for itself. And its fire resistance is truly great.

Material characteristics

As I said above, each of these materials is good in its own way. Although they are intended for one purpose - wall decoration with subsequent alignment, but the root is completely different.

Plaster

The plaster for a long time enjoyed in great demand, which slept a little with the advent of plasterboard. But immediately there was one question - the cheaper to align the walls with plasterboard or plaster? Looking at the advantages of plaster, as well as its disadvantages, you can give a more detailed answer.

pros

So, allotes such advantages:

1. If you compare the plaster and plasterboard, then their price is immediately rushed into the eyes. Given the value of the material only - plaster wins unambiguously. Although there are still other factors that need to be considered, but you will learn about them just below.
2. Properly posked walls will help you achieve the desired result for many years. Well prepared and applied plaster, it will be very reliable and shockproof.

1. The material provides a long-term perspective without additional work. Finish the finishing stage of the finishes and can enjoy excellent results up to 25 or more.
2. Plaster does not cause problems to hang some objects on the wall, be it pictures, technique or. You can do all this with your own hands, without additional work and the involvement of specialists.

disadvantages

Of the minuses, I can not mention such:

1. Such works can take away a lot of time. Of course, it largely depends on the initial state of the walls themselves, well, as well as from the work experience of the plaster. Although many specialists make such work in a short period, but, unfortunately, with a serious markup.
2. Please note that the plaster falls under the category of wet works associated with the kneading mortar, etc. Therefore, during the repair, be prepared for a dirty setting. If you want to avoid this, then such work is not suitable for your walls.

1. If your walls have a big curvature, then it will take a large amount of material to eliminate it. It is not entirely profitable, as a plasterboard will cost cheaper in this case.
2. If you are poorly understood in such work, you will be very difficult to control the masters. Not every employee will do work on conscience, and perhaps in advance or because of laziness, can allow a number of technological errors that can no longer fix.

Probably you noticed, the plaster has a neutral characteristic, with its number of advantages and disadvantages. But plasterboard also has a similar situation. Which one?

Plasterboard

Plasterboard is enough universal Materialwhich provides a wide variety of repairs. You can completely align the walls by sacrifting the small area of \u200b\u200byour room. What else is noteworthy material?

Benefits

The advantages of it are:

1. Wide opportunities in design. Thanks to the plasterboard, you can create really interesting things, ranging from convex walls in the form of a built-in stand, and ending with the ceiling. Its universality is really great, so if on the question: "What is cheaper to plastering the walls or hesitating the plasterboard?", Early versatility arises, then the choice is obvious.

1. Works with drywall transfers dry and are uniquely cleaner. If you do not want to mess around with water, then this is your correct choice.
2. Another useful feature of the drywall is the ability to "breathe". Such walls are capable not only to absorb, but also to give moisture.

1. Plasterboard has excellent soundproof properties, and also allows you to create an additional layer of thermal insulation.
2. Work with GCCs are carried out much faster.

GlKl Mounting Disease occupies a place, but the ability to hide under the trim all wires

1. Plasterboard is a rather fragile material, and therefore it does not allow to hang heavy items on the wall, and if it is very necessary, additional strengthening is required.
2. The cost of the material itself is slightly higher than the price of plaster.

Do all flaws overlap all the flaws - to solve only you. But despite the minuses of GLK, its popularity grows every day.

So what is better?

And so we approached the final choice between two ways to finish the walls. But be that as it may, there is simply no unambiguous answer to this question. Even if you ask: "What is cheaper - plasterboard or plaster?", Then the answer will be very relative.

Although the plaster itself is cheaper than GLK, work can do it much more expensive, and this is not including their duration. Therefore, it can be said that the cost of finishing is almost equal to each other.

Unambiguous instructions for choosing finishing works does not exist, but I will give good advice - Rely on the dimensions of the room, as well as what you want to get ended up.

Would you like to insulate the house, thoroughly align the walls or at all - to make an extra wall? Plasterboard will help you with this. And if you own a room with irregular heating in winter, a small area and high humidity - then the best choice There will be plaster.

In the photo - a wall of plasterboard with illumination.

Short outcome

As in many matters - it all depends on your preferences. I think when choosing should be focused on the indicators of your room, it will not be superfluous to carefully examine the advantages and disadvantages of materials.

Have questions? Specify them in the comments. And for the full view of the topic, see the video in this article.

November 2, 2016.

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!

Before doing repair work The question arises which material is preferable to finishing the walls and ceiling plaster or plasterboard.

Each of these materials, in addition to many advantages, there are some drawbacks. In this article, we consider species, characteristics, pros and cons of these materials, ways to finish the walls. Based on this data, you can choose the appropriate material for a specific case.

Plasterboard or plaster

Both materials are very popular when performing repair work. Let's try to figure out than to separate the walls with plasterboard or plaster, which is better to use to make the walls of beautiful and durable.

To choose optimal option To fulfill finishing works, you need to study the properties of drywall and plaster mixtures.

Based on the knowledge gained on the types of materials, you can choose the most suitable option.

Everyone chooses construction Materials Individually, based on its own requirements, the functional purpose of the premises and budget.

Plasterboard

Gypsum sheets are completely harmless to humans

Frequently use plasterboard instead of plaster to quickly and high-quality walls.

The material is a sheet made of several layers: in the middle is a layer of gypsum, with the outer and the inner side, the layers of cardboard are glued. It appeared on the market not very long ago, but managed to prove himself among builders at the expense of many of his advantages.

Gypsum is manufactured on the basis of natural materials, it is completely harmless to humans and ambient. Special tools are required for processing this material.

A slightly watered sheet, you can give it a convenient form, so it is often used for the manufacture of arched and wave-like structures.

Released types of plasterboard Consider in the table:

№	Type of plasterboard	Characteristic
1	Wall Sheets (GLK)	Gray sheets, 12.5 mm thick, 1200 mm wide, 2300-2500 mm long.
2	Ceiling lists	Ceiling, niches, manufactures arches, multi-level structures. It has a thickness of 9.5 mm, 1200 mm width, a length of 2000 and 2500 mm. It is cheaper than the wall due to the smaller thickness.
3	Flexible (arched)	They differ in a small thickness of 6.5 mm and the presence of fiberglass threads that increase the bending strength. They are stacked in two layers, as very thin. The cost of the design is pretty high due to reinforcing filaments and double consumption of material. Release sheets 1200 mm wide, 3000 mm long.
4	Fire-resistant (GKLO)	Distinguished by the presence in the gypsum layer large number Reinforcing fibers and other additives making it resistant to fire. It is used in rooms with elevated fire safety requirements and for finishing fireplaces and chimneys. It has light - grey colour, thickness 12, 5 mm, width 1200 mm, length 2000, 2500, 3000 mm.
5	Moisture-resistant	Cardboard and core are impregnated with special moisture protection compositions. Suitable for use in wet rooms.

Sheets are necessarily marked:

Any type of drywall does not burn and does not support burning. When exposed to fire, the core is charred, which leads to its destruction. Fire resistant brands withstand the fire and are not destroyed.

Plaster

Inside the room walls are separated by a plaster or limestone mixture

The stucco is used for a very long time, it has proven itself when performing outdoor and interior decoration.

Plastering on a cement basis is most often used for external work.

Gypsum and lime mixtures are used to finish indoors.

We produce a wide variety of compounds that differ in the components and methods of application.

Classic plaster

Consider in the table the species and characteristics of plastering mixtures used for draft works:

№	Type of plaster	Characteristic
1	Mineral	Made on the basis of lime with the addition of sand, sometimes plaster. The wall, lined with such a mixture, has high steam-resistant, resistant to ultraviolet, fire, bacteria, mold. Sold in the form of a dry mixture, which you need to breed before use. The disadvantages include small elasticity, during operation it can crack.
2	Acrylic	Made from acrylic resin on a water-dispersion basis. The surface treated with this composition is resistant to moisture, withstands the temperature differences, elastic, is not affected by fungal lesions. Durability of 25 years. It is manufactured in the form of a ready-to-use mass.
3	Glinian	Move from clay with the addition of straw and cellulose fibers. Stained with pigments. Allows you to get both smooth and textured surface.

Decorative plaster

In addition to classic plasters, produce a lot of mixtures for decorative finishing works.

Consider the main types in the table decorative plasters and their properties:

№	Types of decorative plaster	Properties
1	Silicone	Mashed on the basis of silicone resin. It has the highest cost. It is used complete with primer on silicone basis. Forms a steamproof, elastic surface with high water and dirt-repellent properties.
2	Structural	Heterogeneous grainy mass with the addition of quartz, wood fibers, small pebbles, marble crumbs.
3	Textured	Manufactured based on lime flour. Applies a surface embossed structure.
4	Venetian	Made on the basis of marble flour, a transparent surface is obtained, almost indistinguishable from marble.

If there is no experience of applying plaster to get the perfect durable surface, it is better to turn to professionals.

Characteristics of drywall and plaster

To choose the most suitable material, you need to study its strengths and weaknesses.

On the basis of the table, consider the characteristics of the most sought-after materials used for finishing works:

Type of material	Plasterboard	Plaster
Surface preparation	Not required	Required
Time execution of work	Quickly, within 1-3 days, you can separate the ceiling and walls in the rooms. Easy processing.	Works are performed in stages, apply a rough layer when the surface dry, covers the finish layer.
work experience	Not required. Simple smooth designs can consolidate a person who has no experience in construction work.	A black layer can also apply a newcomer, but for the application of some types of finish coatings will have to hire a professional.
Laying Communications	You can pave cables, pipes for plasterboard.	It is required to stick the walls.
Insulation	The heat insulation material is easy to pave under plasterboard.	You can warm the walls under the plaster, but it will take time and completion of additional work. Sometimes the plaster is applied to plasterboard, under which the insulation is laid.
Soundproofing	High.	Low.
Fractional formation	Not formed.	The surface may crack during operation.

The decoration of the walls of plasterboard without stucco is undesirable. The thin layer of the plaster mortar is an additional protection of the material. When stacking with wallpaper, it allows them to be replaced without damaging the cardboard layer. If you stick the wallpaper immediately to the cardboard, with the next repair, it will take off with wallpaper.

Plasterboard need to plaster

Plasterboard will have to spit

After the walls were crushed with plasteron, they need to plaster: close the joints and apply a thin layer of putty.

This process is performed faster than with full wall shocking.

What is needed by plastering plasterboard:

1. Plasterboard has bevelled edges, so the joints and hats of self-tapping screws need to shake. Along the joint is glued to the tape, covered the plaster mixture on top. After drying it, they perform the grout of sandpaper.
2. After the stamps of the joints, you need to cover the sheet with a thin layer of plaster. To do this, use the finish mixture, diluted to the consistency of sour cream. Apply it to the surface of the roller. About what is cheaper, see this video:

Last stage of drywall stain water-emulsion paint Or they apply a third, more dense layer of plaster under pasting with wallpaper.

What material is better

We reviewed the characteristics of plasterboard and plaster. Even experienced builders cannot unambiguously answer that better, drywall or plaster. It all depends on many factors, and the choice will have to be done to each independently on the basis of the advantages and disadvantages of each material. Read more about what to choose, see this video:

If you want the room to be less dirt and humidity, then perform the walls of the walls without using plaster. Plasterboard sheathing significantly speeds up the process of performing work. If you load the walls suspended shelves, it is better to separate their plaster. Such a surface will withstand any loads.

Finishing works indoors are often associated with the need to level the walls. Typically, various plastering formulations or drywall are used for these purposes. The resulting coatings are characterized by quality supporting abilities and decoration features. To understand what is better: plaster or drywall, you need to learn more about these materials.

Plaster is a general name for a group of materials that are used to create a smooth surface by applying a specific layer. They can be made on the basis of cement, gypsum, lime or clay. Sand or other mineral fillers add to the binder. Special additives are also used to increase the viscosity and plasticity of the material. Some additives are used to accelerate or slow down the drying plaster.

These materials are primarily divided into plasters for outdoor or internal work. They can also divide on subspecies, depending on the quality of the coating after drying the solution. In addition, there are compositions for heat and sound insulation. In most cases, plasterings have a white or gray color, but some decorative mixtures add a kel during production. The material can be supplied in a dry powder form in bags of 25 and 50 kg. There are also ready-made solutions that are sold in plastic containers of various volumes.

Plaster - the general name of a group of materials that can differ significantly as in texture and appearanceand on operational properties

If we talk about the positive sides of this material, the following are especially allocated:

1. Long service life. Subject to the technology of manufacturing and application on walls, plaster can serve under 30 years. This in this case is about the rough leveling finish, the decorative serves as 2 times less.
2. Compared to drywall, buying materials for plastering will cost a little cheaper. You can save approximately 50% of the budget, subject to use inexpensive cement mixtures For alignment of surfaces and a thin decorative layer. If you consider the cost of work, then plastering, ultimately, costs 10-20% cheaper.
3. After drying, the wall becomes durable and protected from various influences. This allows you to hang decor, furniture or equipment on it. At the same time, plasterboard will not be able to withstand serious mechanical loads, so such an opportunity disappears.

Watching walls look very aesthetic and fully prepared for decorative trim

The main disadvantage of plasters is the complexity of work with them. The mixture must be prepared correctly, bring to the desired consistency, and then to the limited period of time transfer it to the surface being processed. Serious are also required preparatory work Before plastering. The plaster dried for a long time, usually takes from 2 weeks to a month to spend work from beginning to end. Violation of drying technology leads to damage to the coating, so you will have to wait anyway.

Too large walls of the wall or a significant amount of defects are difficult to fix with the help of plaster. For this you need a lot of solution, which leads to additional spending. Also, one layer of plaster should not exceed 25 mm, and between them should be a reinforcing grid, which complicates the work. It should not be forgotten that the inexperienced master will be difficult to determine the quality of the solution and the finished coating, so the flaws during application are inevitable.

In some cases, a reinforcing mesh and a large consumption of solutions are required for wall plaster

Features of plasterboard

Plasterboard is sometimes called "dry plaster", since it is the closest analog it. In Western countries, we prefer to work with plasterboard work with plaster, but they are used in our latitudes to the same extent. Plasterboard is a sheets of dense solid paper, between which there is a layer of plaster. It is designed to equalize surfaces, thermal insulation or disguise engineering communications in rooms with a normal level of humidity.

On a note! For bathrooms, basements and other wet rooms, it is recommended to use a special GLC with a polymer layer, which is protected from the harmful effects of water.

For premises with high humidity it is better to use GLC with a polymer layer

Simple plasterboard will serve about 15 years under normal conditions, moisture-resistant in the bathroom will need to be replaced by about 7 years. After mounting the sheets of the material, a perfectly smooth surface is obtained, which can be decorated with any ways.

Of the advantages of this material, it is necessary to highlight the following:

1. Plasterboard - already the finished product you just need to install. The work is not conjugate with the appearance of a large amount of garbage and pollution.
2. This material does not require additional sound insulation, because it blocks the sound itself.
3. Plasterboard is able to quickly recruit and give moisture, so it does not accumulate under the surface.
4. With it, it is possible to separate not only smooth coatings, but also create intricate bends, arrange an interroom opening in the form of the arch and so on.
5. Mounting of drywall occupies much less time than applying plaster composition.
6. Between the sheets of the GLC and the treated surface, the insulation can be paved, for example, mineral wool to effectively use the space.

The first and main thing negative trait GKC is to reduce the internal volume of the room. The fact is that the sheets of the material are not installed immediately on the wall, but on a metal crate. In addition, the installed plasterboard can not be considered finished finish. It will be necessary to put the seams between the sheets, staining, facing tiles or pasting with wallpaper.

Mounting frame for plasterboard significantly reduces room area

It is important to remember that drywall is a rather fragile material, so on the walls decorated with them, you can not hang furniture or heavy equipment. This disadvantage can be partially leveled by setting additional fastenings to the crate before directly installing sheets, but if this is not done before, it will have to remove the material to enhance the wall.

In what cases is the plasterboard better plaster

Installation of GLC is preferable in cases where the wall is raised more than 80 mm, it has a lot of cracks, chosen, influx, uneven joints, chips and other defects that are inherent in concrete and brick structures. Also, this material is more suitable than the plaster mix when you need to quickly finish the repair. Even inexperienced house master Could cope with the ceiling and walls in 2-3 days. Professional plasters also work quickly, but still need to wait for drying.

On a note! Plasterboard is a material for homemade masters that do not have special Education and the rich experience of finishing works. The entire installation process is reduced to drilling holes and installing fasteners.

Such a finish is suitable in cases where there is no possibility or desire to strob wall. All engineering communications can be masked using sheets of this material. If the pipes and wiring are not in the natural gap between the GLC and the wall, then in it you can pass the insulation. Usually used mineral woolSince it is not very expensive, but effective.

The layer of insulation inside the carcass for drywall creates additional heat and sound insulation of the room

If you plan to decorate surfaces with staining, it is better to use drywall instead of plaster. Microcracks do not appear on the sheets, so the finishing layer will not suffer. Also, this material can be installed in conditions high humidity and low temperature, which cannot be said about plaster.

When the plaster is preferably drywall

In compliance with manufacturing technologies and applying, the resulting coating of plaster mixes is characterized by a significant level of mechanical strength, so if you plan to hang on the wall large furniture and equipment, or there is a possibility of damage, it is necessary to abandon GLC and stacking the surface. Also plaster better suitable In the event that there is a significant risk of flooding, or simply in wet rooms. If such a nuisance happens, the plasterboard will come into disrepair, and the plastered surface will simply dry.

Even heavy tiles can be installed on the plastered walls. Also, the plaster is better suited if the walls have a small amount of defects. It is not recommended to use drywall in close rooms, because it will take it without that crammed space.

Plaster perfectly suitable for alignment of walls and allows you to save space

Do you need to plaster drywall under the wallpaper?

In some cases, it is not necessary to choose that the plaster or drywall is better, but on the contrary, to use both of these material together. The fact is that when blowing GLOs without prior preparation, the rolled material is tightly stick to the cardboard, so you can only change the finish coating together with the plasterboard. The layer of plaster under the wallpaper should be minimal, only in order to create a small layer.

Cost of materials and works

To understand what is better: plaster or plasterboard, you can resort to the calculation of the value of materials and works.

Suppose there is a room of 3x4x2.5 m. For plasterboard, the following will be required:

• Sheets of plasterboard in the amount of 20 pcs - the approximate value of 7000 p.
• Reiki and steps for the crate - 40 pieces of both - 4000 p.
• Two packs of dowels - 400 p.
• Five packings of self-tapping screws - 400 p.
• Serpentanka - 100 r.
• Primer (10 l) - 620 p.
• Putty (3 bags) - 1200 p.

At the moment good master On average, take 500 p. per square meterbecause you need to process 35 square meters. m, then the cost of work is 17500r. Final sum - 31220 p.

Plaster or Plasterton: Cost difference - insignificant, time difference - Great

For shuttering:

• 10 Printing cans - 6000 p.
• 24 bags of plaster - 4560 p.
• 3 bag of finishing plaster - 600 p.

The cost of work is 600 p. per square meter. The plaster will have to pay 21000 p. The final cost of work is 32160.

The difference in the cost is insignificant, but in time is very large. If you plan to quickly complete the repair, then it is better to stop the choice on plasterboard. If solid repair actions are required, it is better to choose plaster.