What woman does not dream of a wardrobe created on their own sketches? This design will allow you to get rid of the bored cabinets with uncomfortable shelves, and if the room space allows, you can create a cozy corner that will become not only a place to store things, but also relatively spacious fittingry.

The easiest option is a design of a dressing room made of drywall: this material is very easy in operation and allows in a short time to mount any complexity solutions.

Design options

The creation of a dressing room made of plasterboard will take you not more than 2-3 days, but before installing the design, all important aspects should be thoroughly calculated: convenient location, structural dimensions and its functional filling. All these factors must be taken into account at the design stage in order to prevent errors.

Choosing a place

In many apartments, there are already ready-made "surplus" and storerooms that can be used as a wardrobe room. In this case, you will only need to take care of the structure of the shelves and the installation of the necessary fittings. If there are no suitable rooms in your apartment or house, you can select space under the dressing room in one of the rooms or in a wide corridor.

Most often, such storage premises are equipped in spacious bedrooms. For the construction of the design, the so-called "dead" angles are distinguished - sections, or not at all involved, or occupied by cabinets and chests.

Tip! To determine the optimal place for the dressing room, draw on a sheet of paper outline of the room and cut out scaled furniture elements from paper, which will remain in the bedroom after repair. Moving bed, stands and dressers on the "room", you will find a comfortable area for construction construction.

When choosing a place, consider that optimal size The designs should be at least 1 * 1.5 meters, on a smaller area you simply will not be able to conveniently place all the things you want to remove.

Configuration

There are several options for configuration of storage facilities:

1. "Corridor". With this option, the new room is drawn along one of the free walls. On the fenced area and rods. This design, although it allows you to remove all things from the bedroom, but it is considered not entirely comfortable - in the close pass, you will most likely be uncomfortable to deal with your wardrobe.



2. Square. In this case, a square or rectangular area is highlighted in the room. The spacious design will allow you to conveniently post here and racks with shelves, and shoes, and even - if this allows the bedroom area - an ironing board or a dressing table.



3. Angle. Another option to create a spacious premises for storing things, while not so explicitly released in the interior and does not take away the useful space at the bedroom.



4. Polygon. The free configuration of the content of the new premises will optimize the cost of the useful space in the bedroom and in the dressing room. "Raised" from the corner, the construction of its walls will create a convenient geometry of the room.

The configuration selection should be based on the presence of a free area in the bedroom. It is important to keep the balance to keep the new construction in the room did not make it even closer than the cabinets from which you strive to get rid of.

Doors

Since the concept of a wardrobe includes a certain isolation, you should consider the registration of entry into it. The door must be comfortable and not to take away the useful space in both the new room and in the bedroom.

It is clear that the use of swing doors is not the best choice. The optimal will be the variant of retractable canvases or light folding structures. In a specialized store you will help you choose the perfect door.



Important! If the storage room will be closed tightly, it is necessary to further provide its ventilation by making the gaps at the top or installing the lattice in the walls. Without these measures, textiles can begin to smell unpleasantly.

But doors can not be used at all, leaving the passage to the room open. In this case, the opening can be issued in the form of an arch - the round the form will give the design of intimacy and airiness.

Space Planning

So, you have decided on the configuration and an area of \u200b\u200bfuture dressing room made of drywall. After that, the most responsible design stage is followed: planning its internal space.

First, the depth of all shelves is laid in the drawings: usually 55 cm. This size is enough to optimally place on horizontal surfaces, seasonal blankets, and also conveniently placed longitudinal rods for hangers.



After this, the space is distributed into several functional zones, it is usually divided into three levels:

• top, for storing overall and rarely used things (tourist equipment, tools, hat boxes, etc.);
• medium, for storing proprietors;
• nizhny, for storing unused shoes.

The last two levels are predetermining when planning. From the floor should be postponed the height of the shoe or shelves for storing shoes, and then distribute the remaining and plots with rods:

• the optimal height of the shelves for things is 40 cm;
• height of the zone for shirts, coal and blouses - 100 cm;
• the height of the storage of dresses, costumes and outerwear is 150 cm.

In addition, when planning space, it is necessary to allocate one of the walls under big mirror And organize optimal lighting In the designed room, since there will be no natural light in it.

Installation and sheathing

Having a detailed drawing of the future design on his hands, you can easily choose the necessary materials for the work in the desired volumes. Calculate the consumption of HCL and various profiles will help you in the store where you will be purchased to create a dressing room made of drywall.

Creation algorithm:

1. First you need to accurately place the floor, ceiling and walls in accordance with the existing drawings with the project.
2. On the lines of markup with the help of dowel-nails, the guide profile is attached (Mon). After fixing each item, check laser level Or plumb vertical between ceiling and gender mon. In the doorway, the guide profile is not mounted.
3. The guide profiles are connected by vertical racking elements (PS) in 60 cm increments. The ribs of stiffness located near the walls should be fixed on the concrete dowel-nail.
4. To enhance the design, the rack profiles are connected with horizontal segments of the guide elements. These horizontal framework lines are also located at a distance of 60 cm from each other.
5. On the perimeter of the ceiling (with an indentation of it by 7-15 cm for passing the lamps), the Mon with the constant control of the horizontal level is fastened. Ceiling profiles (PP) are fixed to the frame with 60 cm increments. For optimal distribution Loads Each PP should be attached to the ceiling by straight suspensions.
6. The created ceiling lattice is strengthened by the transverse screwing of PP.
7. The doorway is strengthened by a timber in the size or duplicate rapid profiles.

The finished frame is verified by the level, after which you can start it with the walls of the wall. The sheets are rebounded according to the size of the site being closed and are attached to self-drawing to the rapid profile.

Important! In the course of the work, it is necessary to take care of the gasket and removal of wiring for sockets and lighting devices.

The dressing room first is trimmed from the inside, then sound insulation is laid into the created partition, and then the wall is closed with plasterboard from the outside. Last Stage - Device suspended ceiling From GLK: sheets are screwed to PP, and at the output place of the wiring is drilled by a crown of holes for spotlights.

Large and spacious wardrobe, unfortunately, can afford not all, but to make her compact and convenient version with their own hands forces to everyone. To do this, you will need only a small share of skills and plasterboard.

Basic features and room requirements

One of the main functions of the competently decorated dressing room from the GLK is an ordered storage of things. In addition, using a wardrobe, you can get rid of the need to use a wardrobe, while at the same time clearing the room from litters.

Another fairly obvious function - saving space, because by building a convenient construction for storing all sorts of things, you can save yourself from the need to use large number Different shelves, bedside tables and boxes.

In particular "modest" in relation to the free space of rooms, it is possible to easily solve the problem of an insufficient number of space, installing the sliding doors instead of the swing doors.

Not the last role when installing a dressing room made of plasterboard plays a factor in the comfort of the room and its competent decor.

Council. The facade of the design can be additionally issued. decorative elementsCombined with the rest of the interior, as well as install a large mirror in the door, which will allow you to visually expand the space.

There are a number of requirements that are high-quality, albeit the homemade dressing room must match:

1. The size of the design should be at least 1x1.5 m. There are such a number of space enough for a comfortable location of basic clothing and constant dressing.
2. The depth of the zone intended for the outerwear, dresses, etc., should be at least 1.5 m, and zones for storing short things - 0.5x1 m.
3. Availability upper shelves For storing hats, various equipment and other seasonal things.

Attention! The project should be created at the rate of which the number of things will be stored: it is not necessary to equip the room with an area of \u200b\u200b"stock".

Features of filling and choosing a place

For arrangement of a roomy and comfortable dressing room made of drywall, it is important to take into account the presence of several main elements:

• Lower sections are designed to store shoes;
• The upper sections are suitable for hats and accessories. Here you can equip retractable drawers or special partitions for baskets;
• The crossbars are used for storing sleeping bags, as well as hanging on the hangers of the top and any easily entered clothing.

Deciding with the size and filling of the storage room, it is important to easily choose the place to improve the dressing room of plasterboard:

Technology construction work

Before the beginning mounting work It is necessary to prepare construction tools and purchase an optimal amount of material. So, for the construction of a dressing room of plasterboard, you will need:

• Building level;
• Perforator;
• Screwdriver;
• Putty knife;
• Knife on plasterboard.

Also for work, of course, plasterboard, putty and metal profile are required. If necessary, you can add to this list mineral Wat.

Your attention step-by-step instruction For the construction of a dressing room of plasterboard with their own hands:

1. 1. The first and, perhaps, one of the most important stages is to create a competent sketch of the future design. Before starting work, it is necessary to make a room drawing and a dressing room located in it with all the elements in the original sizes.
   2. The second stage is the transfer of all the main nodes from the resulting drawing on the walls. To do this, you can use the usual pencil. The profile position is indicated using a conventional construction tape.
   3. Next, it is necessary to fix the framework frame. The first thing is fixed by the carrier bar. Dowels are used for this. Be sure to check the horizontal horizontality during this process using a level. A vertical profile is inserted into special grooves in a step of 0.5-0.6 m and fixed. It is important to correctly fasten the carrier profiles on horizontal surfaces (floor, ceiling). After fixing all profiles, hooks and crossbar are fixed on them using self-tapping screws.

1. The drywall is measured and is neatly cut off with a special knife. The sheets of the material are fixed on the profile by self-drawing on the reverse side.
   The next step is the overlooking the outdoor side of HCL profiles. If desired, you can fill the space between the sheets of mineral wool.
2. Installation of electrical wiring is a very important stage, since it will depend not only the illumination of the room, but also the safety of the room during its operation. If in the wall where the design is mounted, there is already a socket, the better. If there is no such, you will have to tinker. Be sure to consult a specialist regarding the ability to mount point lighting.
3. The simplest version of the lighting is the use of LED tape.
   Installing the door. As already mentioned earlier, optimal option For homemade dressing room made of drywall - sliding design. It is fixed with the help of special roller mechanisms. If you do not have experience in this case, you can simply replace the doors with a dense tissue curtain.
4. Treatment with putty. After the end of the installation work, you can start finishing. The entire surface of the design must be treated with putty. Then cover the primer layer. When the material is completely dry, you can move to the finishing finish: painting, sticking wallpaper, trimming of wood imitation, etc.

As you might make sure the creation of a dressing room made of drywall do it yourself - the case is not easy, but very interesting. And with a competent approach to operation, the result will be spectacular and practical. Good luck!

Dressing room of plasterboard: video

If you know how to make a dressing room made of drywall with your own hands, you can easily create a new comfortable room for storing things in your apartment and free the rooms from all over.

Many dream wardridge dream of a bedroom, and with the help of drywall it is quite possible to implement in any apartment.

It is easy to work with this material, so you can make a dressing room with your own hands with my own hands, who has little experience in repair and finishing work.

Photo of the creation stages will help you not get confused, perform all the steps correctly and get a beautiful and comfortable dressing room as a result.

Before starting work on creating a wardrobe, you need to decide on the place where it will be located, as well as the size of the future structure, which, in turn, depends on the functions that the construction will be performed.

Home Function Wardrobe - Storage and Systematization of Things and Clothes.

In addition, such a structure will help you to make other rooms of the apartment more free: to release the corridor from the outerwear, make unnecessary things from the bedroom, etc.

With the help of a dressing room, you can safely save space, abandoning big cabinets in other rooms, because now the clothes can be stored in one place.

Finally, the dressing room made by your own hands can be decorated in the bedroom or other room where you decide to put it.

The bedroom is not the only convenient place to accommodate the dressing room. Moreover, in some apartments, it is small and physically can not accommodate such a structure.

If your apartment is a dead-end corridor, then the dressing room can be located here.

Thus, you rationally use the empty space of the corridor, not taking this square meters At residential rooms.

The presence in the house NIS is another excellent opportunity to place the dressing room. However, it should be borne here that the depth will succeed exactly like a niche.

And if it is not too deep, then it is better to refuse this option.

Other interesting option - Equip the dressing room on the balcony or loggia.

Minus such an idea is that its implementation will require you a lot of cash investments: the balcony will need to insulate and spend high-quality finishso that it is isolated from moisture.

However, if you do it all with your own hands, it turns out not so expensive, and the location of the dressing room on the balcony will save you a residential space.

One of the most common and convenient options for placing the storage of things - living room. Most often, the wardrobe is done in the bedroom, just burning part of the space.

The minus of the method is obvious - loss of living space. However, if the room is not too small, then the wardrobe will fit organically, given that drywall products are quite compact and occupy a minimum of space.

See what the wardrobe looks in the bedroom and other places of the apartment, you can in the photo in the section.

View as many options as possible so that you have ideas about the location of your design, taking into account the maximum rational use space.

To make a high-quality dressing room, you need a plan where all internal modules and wardrobes will be reflected to ensure that the design is convenient to use.

Standard dressing room includes several mandatory elements. First of all, it is a crossbind, equipped with tremers, on which the upper clothes hang.

Also need a section at the bottom where shoes will stand. It can be a shelf or small boxes.

At the top of the design usually make a place to store hats, and on the sides there are shelves on which casual wear will be.

It is not bad to make several boxes where you can store underwear, socks and another trifle.

If the wardrobe is used the whole family, then it is necessary to take into account and make it more spacious and functional.

Stages of work

After the approximate plan is ready (you can make a dressing room like this, as in the photo you liked, and not to invent yourself), you need to prepare materials and tools that will be needed in the work.

You will need:

• plasterboard;
• metal profiles;
• level;
• minvata (if you need insulation);
• selfless
• screwdriver;
• dowel;
• perforator;
• putty;
• putty knife;
• primer mixture.

The plan needs to make the size of the future design to make the wall markup in accordance with them.

The competent drawing will be required to you in work, so if you have never done the drawings earlier, refer to the one who has experience, or find a ready-made option.

If the dimensions are incorrect, then the design will not work.

In accordance with the drawing, it is necessary to note the pencil on the walls the main components of the design. To make it easier to put profiles, markup can be made using adhesive tape.

After marking, you need to fix the carrier bar on the wall (it is better to do it with a dowel), and then check the correctness of its location.

Vertical profiles are inserted into the slots of the plank - later the shelves, crossbars and other parts of the dressing room will be fixed here.

Shelves on the brackets are fixed in the design with the help of self-tapping and screwdriver. Following the rod for trempels, on which hooks will be.

Plasterboard must be cut according to the size of the drawing on the sheets of the right shape and the magnitude. To do this, use the knife.

The finished material must be fixed from the inside of the frame with a screwdriver. Do it need it carefully, because Plasterboard rather fragile. Use photos with stages of work to do everything right.

If you decide to make isolation, you need to lay out mineral wool from the outside of the frame, before starting the construction of the design.

The layer will make the dressing room more warm and quiet, which is relevant if you build it on the balcony. But in the bedroom thermal insulation is optional.

Among other things, in the dressing room you need to spend the light to use it it was convenient. Pour the wiring is not more difficult than collecting the design itself, and you can easily handle it with your own hands.

In the absence of experience, use the video stages.

Of course, perfectly, if in the wall to which the dressing room is adjacent, there is already a socket. In this case, you will only have to choose the type of lighting and buy lamps.

But if there is no socket, it can be done. In this case, you can resort to the services of the electrician and make in the dressing room point lighting on the ceiling or upper shelves.

This is the optimal option for the dressing room, because You will be able to save space as much as possible. Yes, and it looks like this very stylish.

You can make a socket yourself if you have the appropriate experience.

The last stage you need to see the frame of plasterboard outside, consolidating the sheets of material on metal profiles.

If you decide not to engage in lighting, and inside the design there are no wires, then instead of the trim, you can simply paint the dressing room or go to the same wallpaper as in the bedroom or room where it is located.

Dressing room can be isolated with the door - it is better to choose a sliding design. For visual increase Spaces in the bedroom, you can equip the door with glass.

There is a simpler and cheap option - just get the entrance to the cloth.

After creating a dressing room made of drywall needs a finish. You need to cover the entire surface with putty and primer, paying special attention to the joints and seams.

As a final finish, a dressing room can be seen by a tree, go with wallpaper or paint.

Best of all, of course, the wooden coating looks - it will look equally good in the bedroom, corridor or on the balcony. But you can use other options.

In addition to cladding, you can think about and any additional decorative finish: for example, glass, painting, images, etc.

It is best that the dressing room "merged" with the room space - so it will visually take less placeAnd also organically fit into the room space.

It is possible to decorate the dressing room not only outside, but also from the inside: to paint the shelves, or sack using the decoupage technique.

Do it yourself with your own hands, and you will get a full-professional dressing room at a bargain price.

Construction Materials

Peter Kravets

Reading time: 3 minutes

A.

If the apartment becomes too difficult to store seasonal things, and the entrance hangers are missing for all clothes, then you need to make a storage room. This special storage provides for the placement of various items and equipment.

In most cases, the design can be made from drywall, using for this part of the bedroom or corridor. Any square meters that can be separated by the partition are construed into the repository. Consider how the storage room made of drywall do it yourself in an apartment or house and what to prepare to start work.

After determining the place where the placement of the pantry is made, you need to figure out what area you can allocate for the construction and which configuration it will be. Such information is enough to start negotiation. It is important to comply with a certain sequence of work in order to prevent flawlessness or miscalculations.

How to make a project?

Project preparation is one of the most important stages of the settlement. With the slightest error, you can get unpleasant consequences that will lead to the demolition of the structure.

First of all, you need to make a sketch of the compartment with the pantry. If there was a repository at this place, it is enough to measure the area and draw the scheme on paper. When finishing the room, the design is calculated with an accuracy of a millimeter, the optimal configuration is selected.

In the aisles should remain about 80 cm for the movement of a person. According to these data, a sketch is drawn up. If there are difficulties with the choice of configuration, you need to explore the typical projects or collect your project from several favorite design details.

Accounting doorways

The presence of the door and the type of its arrangement is significantly affected by the entrance to the storage room, as well as the size of the opening. The door can be made like swinging flaps or like sliding canvas as in the cabinets.

For the installation of such systems, it is not necessary to hire specialists, because you can buy ready-made systems with rollers and guides for them. These components are installed in any door canvases and are made very quickly. In terms of cost, they are distinguished by affordable - only a few thousand rubles.

Improving the reliability and durability of the shelving is achieved by its careful fastening to the walls. If there ready projectthen there are fixation sites. Experts recommend making additional frame elements, so as not to be afraid to spoil the wall or damage the rack.

It is also necessary to pay attention to the loggia or balcony - in the case when there are two such rooms, one of them is usually given under the pantry. In this case, you can get an additional useful area in the apartment for comfortable accommodation without rubbish and unnecessary things.

Choosing materials

To mount the design of a plasterboard profile, you need to purchase a rack profile PS2 (50 * 50mm). This material is enough to arrange the wall sufficiently strong for the storage room.

The design of such a profile will not be very thick in width and does not take a lot of space. From the point of view of sound insulation and conductors, the dressing room in such parameters does not need. The profile is fastened throughout the perimeter and determines the location of the walls of the repository.

The design is trimmed with plasterboard (GLC profile 12-15mm). Loads on the partition will not be, the humidity inside does not exceed the permissible indicators. Choose a profile with increased resistance to water or moisture, as well as profile plates from the gypsum fiber, meaningless.

Mineral wool is stuffed inside the design, which is needed to provide minimal insulation. Microclimate inside the pantry even subject to the absence of products should be maintained normally so that things are not spoiled. In this case, there will be additional sound insulation of the design. The surface is trimmed with putty. For seams you need to use the grid. The base is strengthened by primer.

The finish coating can be the paint of the washing type. This option will be quite reliable and inexpensive, color can change if necessary. Make lighting, for this you need to buy a power outlet in advance, wires, switch. To save energy, you need to choose light sources of LED light. Lighting will be reliable, durable and safe.

Selection of racks

Racks and shelves are chosen from materials according to the project. The cheapest will cost the chipboard, which are suitable for any design. Color and texture, inexpensive price make plates with the best option.

The advantage is the possibility of conventional cutting material into pieces of the desired form, which frees the owner from buying or renting expensive equipment for cutting. Purcharged accessories, selected under the chipboard kit. Racks need to be collected from already sliced \u200b\u200bpieces, in which case the work will be high-quality, simple and fast. It may be necessary to help to maintain parts in the installation process.

How to make a frame and wiring?

Consider the sequence of arrangement of plasterboard pantry. First of all, you need a frame that is pretty simple. A partition is built, markup on the wall, floor and ceiling, drill holes for guide profiles, fix the elements, put the racks and carry out the installation of the jumpers.

Marking

Using the building level, put markup under the guide profile. Marks put a pencil, in dark areas you can glue a greater tape. In order for the markup to be accurate, pick up cords that are convenient to operate.

The holes are drilled to install the dowels, while the profile is applied to the wall and put mark in the holes. To fix, you need to take a dowel 6 * 40 ... 50 mm, then the installation will be rapidly. The carbon diameter should be 6.0mm with a length of greater than a dowel.

Fastening profile

Cart profile can be very fast. In each of the holes, the dowel is inserted, scoring the screw, which cuts the entire structural structure inside the concrete surface. Such a fastening is very reliable. In the floors, especially wooden, are not drilled, since the guides are simply screwed up with 30 mm screws.

Vertical stands

Set vertical racks that are inserted in a step of 0.6 m in the grooves (guides) and fixed with self-draws. Experts call their bugs. In cases where the design has an angle, it is strengthened, connecting two profiles. The wall with such a fastening will be more reliable.

At the door, the design must be enhanced by additionally mounted jumpers. They are made throughout the rest of the design, especially in places of fastening racks and shelves. Horizontal jumpers are fixed at the desired level, connecting to them other details during the installation process.

After the construction framework from the profile, wiring is made. It is paved inside the design in the hoses of a corrugated type. On the walls make shoes. In order to avoid damage, the wires can be laid in the box, which is hiding behind the shelves. In this case, the pantry looks carefully, since all communications are removed to sockets and switches.

Construction construction

As soon as the frame of the walls are made, they begin to the trim. The sequence of actions is also not recommended to violate. Plasterboard is fixed simply - the sheets put on the profile edges and fasten with self-drawing with a step of fasteners 20cm.

Hats should not perform above the design surface, but not much to deepen it so that the sheets do not burst or not cracked. In places where the sheet can not be placed completely, it is cut into the parts you need and are set in the same way.

All items should be shrinkable so that there are no cracks, but even the most minor should be attached. Work on the trim is repeated on both sides, but inside the design it is predetermined to lay mineral wool sliced \u200b\u200binto pieces of suitable size. The remaining works are repeated.

Shpaklevka

First of all, you need to cry all the seams. For this you need a serpent - self-adhesive tape, allowing to strengthen all the joints and prevent cracks on a flat surface. All screws of self-tapping screws are checked, which should not perform above the surface or drown too. It is enough to spend your fingers to feel where there are disorders.

The putty is applied to the places of all connections, making the hats of self-tapping screws. In the angular places for the smoothness, a special putty corner is needed. It is put and carefully missed the same composition as the rest of the surface. The repeated layer must be thin, and after its application will wait for a complete drying.

Using sandpaper, the surface is maintained. In the case of multiple flaws, it is necessary to re-put it before purchasing a sleek state. After that, the soil of the strengthening property is applied, which will allow the base to absorb the paint less and increase the adhesion of the layer. The finish painting is performed by a roller in two layers, so work will be carried out quickly and with sufficient quality.

How to put the doors and shelves?

As soon as they are over finishing work, Doors are put. When installing on conventional loops, the box enters the opening, then all the work is carried out as when installing the ordinary door. For sliding structures You need to use instructions in finished sets with guides. Manufacturers deliver detailed information and schemes that allow you to work quickly.

Installation of shelves

Storage systems set easy, but the detailed sequence depends on the configuration. Consider how to mount the piping racks. Shelves are attached to vertical racks shelves with screws and corners. Such options are reliable, but require special drills. When installing screws, the durability of the fastening is much higher. When assembling from sliced \u200b\u200bpieces, you need to skil from the outside.

Experts recommend using edges heated with iron. Adhesive compositions melts and stick to the chipboard. It is important to prevent burns during heating. For hangers install rods from metal pipes Especially for furniture. They are fastened with flanges, since only such a way is considered the most reliable fastening in the design. It is important to track the thickness of the walls in the pipes - when loading heavy things should not be a deflection.

Trying to streamline chaos, formed in the cabinets, many mistresses dream of a whole room, where every thing would be given a separate place.

The overwhelming majority of citizens do not have so much extra square. But in almost every apartment there is a place that can be accommodated for the design of a dressing room of plasterboard.

Advantages of design of drywall

For those who still doubt whether it is worth holding a place in the room with such structures, we note that:

• The design will be harmonized with the interior design of the room, and maybe it will become its highlight, because options finish finish A varied and limited only by the fantasy of the authors.
• Making a dressing room made of plasterboard under the power and homemade Master with experience and newcomer.
• With this room in the room, it will be easier to organize space.
• The design will help save place in the apartment, since you can abandon bulky cabinets, chest of drawers in other rooms.
• With all its advantages, the dressing room of drywall do it yourself, it will cost inexpensively.

What you need to take into account when preparing for work

First of all, you need to decide on the installation site.

Note! Walk-in closet There should be no less than 1 × 1.5 m. And the optimal size of 6 square meters. m.

Options:

• Niche. Suitable if it has enough depth and width. Otherwise, it is not possible to equip the dressing room with convenience.

• Corridor. It will work perfectly if it ends with a dead end.
• Balcony or loggia. Provided that this room is insulated and is isolated from moisture.
• Corner of the room. It is especially convenient when the dressing room made of plasterboard in the bedroom.

You should also immediately consider the following points:

• What door will be installed. Given that it takes an extra place for it, one can consider the option with a sliding mechanism.
• How will the internal space be paid. The configuration of the dressing room and the location of the door depends on this.

At the last point we will stop more.

Space Planning Wardrobe and Creating a Scheme

Without a scheme, you can allow serious errors when, in the end, it will be easier to re-build the design than to correct them.

The procedure for compiling a scheme:

• On paper outline the size of the room on the scale, and indicate the placement of the dressing room. You need to measure and specify the exact dimensions.
• Determine what the size of the shelves, compartments will be. The optimal depth is 50 cm. The scene for the outerwear is calculated on the basis of its quantity and sizes. Height - about 150 cm. At the bottom you need to take place for shoes. It can be shelves or small boxes.
• Indicate location, door dimensions. Let not scare sliding systemsAfter all, today you can buy inexpensive, already equipped mechanisms, to put even a beginner.
• Note on the scheme of the place of attachment of racks. It is necessary in order to know where it is worth installing additional frameworks.

What will take for work

Necessary materials:

• Statione profile PS-2 5 × 5 cm.
• Profile guide.
• Plasterboard sheets 12 or 15 mm thick. Load on the design will not be like high humidity in room. Therefore, overpay over the thickness and additional properties of meaning has no meaning.
• Mineral wool. It is needed to fill the internal partition space.
• Chipboard and accessories for shelves and boxes. Deciding with their dimensions, you can order elements of the desired size.
• Door with accessories.
• Putty.
• Grid for seams.
• Priming.
• Material for finishing finish.
• Lamps, socket, wires. Without lighting in the dressing room, it is not necessary, so you should think in advance how many lamps and where they will be located.

Instruments:

• Screwdriver.
• Perforator.
• Dowel 6 × 40 mm or 6 × 50 mm.
• Construction level.
• Saws.
• Knife on plasterboard.
• Putty knife.

Procedure for performing work

Installation is carried out in several stages, including frame construction, finishing, installation of doors, lighting and storage systems. Let us dwell at each stage in more detail.

Installation of carcass

• Start with markup. Apply it using a level, plumb and construction pencil. A painting tape can also help out where the pencil is not visible.
• Drilling holes under dowel. It is better to do with holes in the profile. For wooden floors do not need to do it. Profiles to the surface are simply screwed by self-drawing.
• Profile fastening: Dowels insert into the holes and scoring the shock screw.
• Install vertical racks: in increments of 60 cm insert them into guides, fixed with clouds (special screws). Corners need to be strengthened by installing two vertical racks in two connected profiles at once.
• Where the shelves are, the horizontal jumpers are installed. It will later need to attach elements.
• Door opening should also be strengthened by setting additional jumpers. Note! After the framework of the frame, try the design. With moderate loads, it should not be fed.
• Laying wiring inside frame. To do this, use a corrugated hose. If the wires need to run along the wall, you can pave in a special box so as not to stick the surface. Wires are displayed in places where the outlets will be located, switches, lamps.

Frame covering sheets of drywall

• Apply a sheet to the edges to the profile, and fasten every 20 cm with self-draws with a step of 3.5 × 25 mm. Do not drag hard fasteners. You need to screw in so that the hat is not sticking out. If necessary, sheets easily cut.
• Mineral wool is stacked.
• The inner side is trimmed. In the same way as external.

Finishing design

• Singing seams with sickle ribbon. It is necessary to strengthen the joints.
• Putting the joints and places of attachment. Corners are processed with a spacious corner.
• A thin layer is applied to a putty on the entire surface and rubs after drying.
• Grinding walls. It will improve the adhesiveness of the finishing finish with the material.
• Staining the surface in two layers.
• Door installation. Here the work is made according to the manufacturer's instructions.

Installation of shelves and storage systems

Working with chipboard has its own characteristics:

• The shelves are attached to vertical racks with special screws - confirmants. Corners - Polkter holders can also be used, but the reliability of the design will decrease.
• Shelves ends need to be punctured by the edge. For this, except for the material itself, it will take iron.
• The rod for things should not have too thin walls so as not to be bombed under the weight of things.

Please note: doors on the cabinets does not make sense. The open system in this case is much more practical.

Ease of use of the wardrobe depends on the properly organized storage system in it. If the work is done correctly, the design will increase the space of the house and facilitate cleaning.