Do you want the child to spend time in the fresh air and at the same time it was in sight? Worried about the safety of the kid? Then it's time to make children's swing do it yourself! Thanks to this decision, you will not only save money, but also get the opportunity to make a design with all your wishes. Make a swing "on the grow" or to organically enter children's Corner In the landscape? Easily! And start better with studying five optimal implementation options playground.

Typology Swing - We study available options

Why reinvent the bike, if everything is already invented before us? But you can make your highlight in the project project and even necessary!

Swing as a platform element

So, depending on the type of swing, the requirements for their layout are changed:

1. Swing with the only axis of rotation - the classic and most simple performed. The seat in them can only move in one direction (back and forth), perpendicular to the beam, on which the design is suspended. Minimum height From the surface of the coating to the seat in this embodiment is 35 cm.
2. Swing with several axes of rotation (the seat is also moving from the sides). Suitable for older children and are quite difficult performed. The minimum distance to the Earth is identical to the first type (35 cm).
3. Swing with one point of the suspension ("sockets"). In this embodiment, the suspension elements (ropes or chains) converge into one point, narrowing up. Such a projectile must be located not lower than 40 cm above the surface of the site. The same distance should be left from the seat to the support structures.

Classic swing with one axis of rotation

Tip! It is advisable to install several swings on the site different types Or one large on whom at least two children would fit. After all, guests will probably come to your child!

From what and how to make a swing - top 5 options

Inventive parents are used to organize children's leisure different materials. Suspended children's swings created by their own hands can be made of automotive tires, ropes and even rim from the old bike. But it is necessary to remember one unshakable rule: all the elements of the suspension should be flexible! It is not allowed to use swings suspended, for example, on metal pipes or other hard details.

Creative swing-plane

PVC pipe cradle

After construction, there were trimming of PVC or polypropylene pipes? Excellent! Of these, there will be wonderful swings for a small child.

Attention! Products made of PVC pipes are collapsing at the expense of fittings, so you can fix the oversight to the manufacturing process at any time. Then the polypropylene will have to be connected using soldering.

Polypropylene Pipe Swing

For the manufacture of the seat-cradles you will need:

• PVC or polypropylene pipes 25, 32 or 40 diameter;
• fat plywood;
• fitting;
• tools for cutting and digesting pipes;
• bright paint for outdoor work.

Taketing for the manufacture of a children's swing with their own hands, remember the importance of staining the elements of the playing area in bright colors. The child perceives the contrasting shades with peripheral vision. Therefore, playing in the sandbox, he will notice lateral vision that the swing is already busy, and will not fall under the swinging design.

In order to make a swing, pipes must first cut:

• 2 segments of 30 cm (side handrails);
• 1 piece of 40 cm long (back);
• 4 pieces of 25 cm (for seats);
• 6 segments of 20 cm (for sides).

A sheet of plywood should be attached to the finished seat, pre-drilled in the holes of the hole, and hang the design on the chain.

A simpler way to make children's swing do it yourself, is presented in video instructions.

Video: Children's swing from polypropylene pipes

https://goo.gl/tfdrnx

Important! The swing from polypropylene pipes is not very durable, since this material becomes fragile under the influence of the Sun. But such a product is enough for a while until the child grows out of the seats-cradles.

How to make a swing-nest from bicycle rim

Swing-nest, his external species A more reminiscent small hammock is one of the most beloved children's shells. You can ride on it as sitting and lying, and if it allows size, then even together!

For the manufacture you will need:

• bicycle rim with a diameter of 29 inches;
• thin polypropylene tube;
• 4 rings and 2 carbine for fastening;
• color and white rope.

Seat manufacturing instructions Swing:

• Polypropylene tube Bend and skip inside the rim, tied the design through hole holes.
• Weave the "seat" from the rope according to the Dream Catcher scheme provided below.
• Complete the whole design with colored ropes, turn the rings for fastening and hang the swing.

Dream Catcher Scheme for Seat

Tip! On top of the rim with a pipe, you can put the pipes for thermal insulation of pipelines. They are compacted and additionally lock design.

Metal swing - how to cook a children's corner

Make children's swing do it yourself from metal, as in the photo, easy. But make such a design safe for small fidgets much more difficult.

Metal swings L-shaped

First you need to decide on the type of carrying structure. For P-shaped swings you will need a serious foundation. While L- and A-shaped structures can be installed simply to the ground, a little insertion of the support.

Scheme of children's swings with a staircase and a horizontal bar

The struts of the L-shaped swing can be welded with each other by making the bottom strapping. This design will be portable and at the same time sustainable enough to do without the foundation. However, the elements of the lower strapping need to deepen a little in the ground or sand to protect the child from the blow of the metal when falling.

How to make a children's metal swing with their own hands:

1. Pipes 32 diameter (you can use the old left after dismantling the heating, etc.) Cut into size. You will need: 4 segments of 250 cm for "legs" of the L-shaped swing and 5 pipes with a length of 240 cm (4 for lower strapping and 1 for the upper crossbar).
2. Cut the frame according to the scheme below.
3. Clean the metal, process to the design and paint it into 2 layers.
4. Drop a square trench with a side of 240 cm and set a swing in it.
5. Lower strapping to fix with the help of fittings (drive off the segments of rods and bend them, fixing the pipes of the design).
6. Pleep the trench sand with stones, align the platform.

Wooden swing for a cheerful company

For the manufacture of a children's swing from a tree with their own hands necessary:

• glued bar 8 per 8 or 10 per 10 cm;
• fat plywood;
• larch or other solid tree breed;
• boards;
• chains, rhy nuts, screws, screws, studs and bolts.

Wooden swing for children

Instructions for the construction of children's swings for two:

1. Using a garden drill, dig a pits 1-1.5 meters deep and 20 cm in diameter.
2. Make the "sleeves" from the frontier) (chop the walls).
3. Pail into the pit of broken bricks or large stones and pour all concrete.
4. When concrete grabbing, hindow metal corners (mortgages) to which supports will be installed.
5. Overhead parts of concrete pillars span with a grinder and paint in a bright color.
6. The basis to pull the 120 mi screws, after making feeding in a bar and installing the hairpins. To cut the struts and attach them to l-shaped on the hairpins.
7. Make a seat of thick plywood and larch boards or other wood with thin screws. Cove the design with a special varnish and attach the chain along the edges.
8. In the posts to make rugs and install them in the corners.
9. Suspend the seat on the chain.

And for the smallest mini-hammock, in which Kroch can even take a little bit! This will require dense fabric, ropes and wooden planks.

Swing-hammock for a small child

Ride a tire - Tire placement options

For the manufacture of children's swings from the tire, it is necessary very little time and minimum of materials. But the pleasure that the child will receive from skiing is just huge.

Swing for the smallest

How to make children's swing from the tire do it yourself:

1. Make the markup of the tire - draw a rectangle in the middle of the tire (the edges at the same time need to leave for the handles).
2. Gently cut a piece of rubber and bite off all sticking metal pieces of wire from Steel Cord (or polish the edges).
3. Remove the tire with the tread inside, so that when the swing, the child did not get injuries.
4. Secure the design on the chains and hang to the tree branch or crossbar on the carbines.

The usual car tire opens a huge scope for fantasy. From the milk rubber, you can cut a horse, tractor or real bike! And you can make a tarzanka for the baby games.

Tire Swing Horse

Ten important rules for child safety

Suspended children's swings made by their own hands must comply with the following rules:

1. If the seat has one suspension point, the attachment of its elements must be completed in such a way as to prevent twisting when swinging. Ropes or chains should not be twisted with each other when used!
2. If the chains perform as the elements of the suspension, they are better to process them. For this purpose, unnecessary garden hoses are perfect! So you will protect the child from the fingers in the links of the chain.
3. Do not place more than two swings on one frame. Otherwise, the risk of colliding children when swinging is increasing.
4. The landing zone should be covered with sand or cutting bark. This will soften the blows at the inevitable drops.
5. The seat should be light (plastic, rubber, wooden) and sufficiently spring (sides are preferably hammering rubber). It will save the child from injuries when hitting the swing.
6. Do not land plants with spines around the perimeter of the landing zone.
7. All wooden parts should be carefully treated with a planer, pollute and cover with a special varnish to protect the children from the off-beam and scratch. And the bolts and other metal fasteners are to drive into the tree so that there are no protruding parts.
8. The most secure L- or A-shaped form of supports. At the same time, the wider the spread of the "legs" swing, the less the load on the design during its use. Accordingly, the slower the details of the projectile are wearing.
9. Remember that the Karabina, which mount the suspension swings, need an annual replacement, because they wear out very quickly! Do not hang the design just on the hooks. With active swing, they can easily break. More reliably use carbines with plastic inserts that protect the part from abrasion.
10. The rope at the point of contact with the attachment knot is better soaked with machinery or solidol. This will prolong its service life and protect the child from falling as a result of the cliff.

Triangular children's safety struts

Baby swing - reason to use the whole family in the process of manufacture! All can help. And even the smallest member of the family, for which the design itself is both a construction, should take part in the work. The main thing about not to forget about the safety of crumbs!

Video: Swing for giving with your own hands

Yes, we were all small when we know perfectly well and understand what they mean a swing for a child, which indescribable delight is experiencing a child swinging on them.

In town, city or village swing are located in the courtyards and special playgrounds, in rest parks. Parents know how difficult it is to pick up their child from such a site, picking up the child home and can't wait anyway))). Your baby will constantly ask for a fabulous place where the winged swings are located, but the moms and dads do not always have free time For walks at the request of their colors.

In order to facilitate life and cats and adults, the author came to mind a brilliant idea, and what if you make a swing right in the house?
Parents can deal with the affairs of the house, and the baby can enjoy and having fun swaying on the winged, under the supervision of course.

Buying ready-made swings for the house does not make sense if your hands grow out of the right place, you need to do the author by the example of the author who made the simplest simplest and essentially free swings for their fidget.
Namely, as you can see in the photo, old denim shorts, chain, carbines and from these simple materials are perfectly visible, see what happened.

Discussed all the advantages of the present invention, go to the method and the assembly method demonstrated by the author in the photo and explanations.
To assemble the swing to a young father, it took:

Materials
1) Denim Shorts
2) chain
3) Watering Hose
4) Carabins 4 pcs
5) Armature
6) Wire

Instruments
1) scissors
2) Pliers
3) Roulette
4) Hammer
5) adjustable key

Everything is ready and the author proceeds to work, first of all prepared denim shorts, paying them in the right places.

The armature in the form of a ring was bent, then inserted into the belt loops, that's what happened.

For greater reliability, the seat of the hoop was cluttered with a ribbon.

Further, the author in the precautionary measures hid the chain into the casing from watering hoseIn order to protect the children's fingers from an unsperested injury. At the end of the chain, screwed the wire and inserted into the cavity of the hose, dragged, everything is ready for operation.

The author attaches the Karabina to the hoop.

Doing it naturally on both sides.

The resulting swings are fixed on the ceiling transverse beam, as shown in the photo.

All this is done with the help of carbines, for greater confidence in the reliability of the design of the chain residues, they are tied up with a node, or screwed with wire.

Well, such wonderful swings were made by the author, everything is very simple and accessible.
The child can ride round days to be always under the supervision of adults, do not interfere with mom under his feet when it prepares or erases. Perfect option For a young family.

Swing at the cottage is not only a place for children's entertainment and fun, but also a great way to rest after working in the air. It has been proven that the effect produced on the human body with swings contributes to pacification, reduced stress and rapid rest. So why not get such useful device at home? In this article we will tell how to choose and build a swing in the country.

If you think that the swings are all the same and differ only with sizes and materials, you are very mistaken. There are many different designs, among which you can choose the optimal option for your needs.

Distinguish next species Swing:

Choosing materials

Garden swing You can make literally from anything: wood, plastic, metal, fabric, etc. But each material has its own performance characteristics to consider when planning the design of the swing. If you want to build stationary swings, the fabric is better not to use, because it will be constantly subjected to atmospheric phenomena (scorching sun, rain, night frost) and very quickly come into disrepair.

Cast-iron forged details will serve for a single decade and do not lose the original appearance at all, but they will have to pay for such pleasure. Optimal option - Wooden swing from boards or bars. They require minimal care, periodic small repair And they can serve faithfully for many years.

For children, plastic or rubber structures are suitable, covered with removable covers that can be changed and washed as contaminated. If you still want to use the fabric, say, make a swing hammock, then make the design to be removable. So you can remove it into the house during the rain and extend the deadlines. Use cloth for sewing covers, capes or pillows for swing.

The optimal combination is a metal tree - such a design will endure even the most severe wintering. Wooden swings for the winter should be covered with a film to prevent direct contact with foliage and snow. Otherwise, rotting can begin, and even the most nice varnish will not help save wood.

How to make stationary wooden swing

Below will be outlined detailed master class About how to make spacious swings for 3-4 people. This option is suitable for relaxing near the decorative pond, swimming pool or in the shady fruit garden.

What instruments and materials will be needed to build a swing at the cottage:

• saw;
• plane;
• lobzik;
• screwdriver;
• grinding machine;
• pine boards and bars;
• carbines;
• fasteners (selflessness);
• welded thick chain;
• weather-resistant transparent varnish (yacht).

The length of fasteners and the size of the carbines should be selected according to the parameters of the used boards and bars. Consider that in addition to our own weight, the swing must withstand the average weight of 5-7 people, even if it is designed for fewer people.

Progress:

Important moment: If you make stationary children's swings on this scenario, the seat is best to mount from the support beams at a distance of at least 30-40 cm so that the child will not accidentally press the child during skating.

Suspended swing from pallets

Palests can be useful not only during the transportation of goods and goods, but also in the household. It turns out magnificent swings, and if you attach a droplet of creativity, you can get original and stylish decoration cottage plot. Here we will describe how to make a swing at the cottage from building pallets and offer some very interesting decisions.

To create the simplest suspension design, you will need a pallet and a thick strong rope (you can rope, steel cable or chain). You can hang the swing on the thick branch of the tree. If such a branch is not observed on the site, you will have to make a reference rack, as in the case of stationary swings.

And if you have found not alone, but two or more pallet, you can make a truly "royal" swing, equipping them with a back, armrests and putting up soft pads ...

In any case, the pallets must be stitched, covered with a mourn and transparent weatherproof varnish. If there are children in the family, you will finish them to work and trust the booze acrylic paints (then covered with varnish).

How to mount a swing to the support

There are several proven and reliable ways to attach a swing (bedrooms, shops, etc.) to the bars of support. By choosing any of the following ways, you can make stable and safe adults or children's swings for giving.

Methods for fastening the swing:

Unusual Garden Swing: Photo

Finally, we suggest you see the photo of the dacha swing, which, perhaps, will inspire you to create an original design.

In order to build comfortable and beautiful swings, it is not necessary to spend the fabulous amounts. You can use the most unexpected healthy materials. We have already described the option with pallets, but another original feed - swing from old doors:

In the attic, the old unsuitable skate or snowboard was poured? Inhale the second life in it and make an unusual swing:

Probably the easiest and cheapest option - swing from the old tire:

Do not hurry to throw out the old chair - it will work out very comfortable pendant swings:

Very cute and unusual children's swings for cottages (from old wheels you can make a deer, horses and even dragon!):

Children can ride clock on street swings. The child attracts a sense of flight. IN apartment houses Swings are installed in playgrounds, and in private areas they put caring parents.

A simple design makes it possible to make suspended swings with your own hands. Moreover, children can be attracted to the design, construction or decoration process.

Street wooden swing - children's joy in flight

Production of a tree swing is the most common practice. This is not surprising, because they are distinguished by such advantages:

• environmental friendliness;
• availability of sawn timber;
• relatively low cost;
• easy work with wood;
• safety. Wood material soft, it reduces the risk of serious injury when falling.

Thanks to the properties of wood, children's wooden swing can be found in almost any private yard or in the country. From the point of view of mobility, they are divided into stationary and portable. Swing from wood, unlike metal more often make in stationary, because The tree does not have sufficient, for sustainable standing weighing (the frame of wooden swing requires reliable consolidation).

Based on this feature, it is necessary to think about the installation site of the swing.

Where to put a swing?

Choosing a place must be taken into account:

• browsing. The child can be in mind if possible;

• remoteness. The economic zone and located near the reservoir is not a place for games. In the absence of other options for installation, you need to protect the zones of the fence. Also trace the swing to be placed at a safe distance from fences, walls with windows, trees, etc. Obstacles for flight. Set swings next to communications is also not worth it;

• illumination and shadiness. The installation site should be light, but create a shadow, especially in the summer at noon time;

• humidity. Street swings from the tree will come into disrepair from excessive moisture, not to mention its harm for the child;

• lack of drafts;

• absence poisonous plants, allergens, honeycomb, prickly shrubs;

• surface relief at installation site. Place setting a swing need to be aligned. Then it is not necessary to vary the length of the support pillars, and the child will not interfere with the enjoyment of his beloved fun;

• the quality of the attachment of each node of the swing.

How to make a swing from the tree do it yourself - step by step instructions

To be confident in reliability, you need to build a swing on your own. The phased guide for newbies will refer to the right direction and construction plan.

Stage 1 - Children's Design Children's Design

Children's wooden swing should be safe - this is an axioma! In many respects, their ability to stably stand is determined by the support configuration (frame). Before getting to work, you need to decide which framework of wooden swing will be optimal for installation. After all, its form affects the safety of the design and determines the place and method of its installation.

Types and types of frames for swing

P-shaped frame

It is considered the most economical model. It uses less lumber for its manufacture. In addition, supports do not interfere with the movement of the child, and cannot cause his injuries by negligence. However, for stability, the design needs to concrete supports, therefore it is stationary. The frame is ideal for installation on soft soil and making suspended sectional swings.

L-shaped frame

Sometimes it is called the support in the form of an inverted letter "V". More stable compared to the previous option. This option allows not only to hang the swing, but also create a children's corner.

X-shaped frame

It is a type of l-shaped, only the mounting of the bars supports is not performed at the place of their joint, but slightly lower, at a distance of 150-200 mm. In place of intersection of vertical bars, jumper is stacked. This is a simpler way to manufacture support. It should be noted that such a frame requires additional strengthening in the form of a side stop.

A-shaped frame

The most reliable of all designs, due to the jumper, which enhances it. It is precisely such a frame to give preference if it is planned to expand a swing due to the ladder arrangement, the installation of the rope for climbing and other elements of the playground.

Stage 2 - Wooden Swing Drawing for Children

The presence of a drawing or sketch of the swing helps to determine the optimal dimensions of the design, calculate the load, select the proper section of wood for the manufacture, determine the amount of material and the parameters of the blanks.

Drawings of a tree swing must contain:

• frame configuration (shape);

• dimensions of wooden swing. It should be noted that the size of the swing is height, as well as the perimeter of the base;

• the presence and place of installing additional reinforcing elements (kosynock, spacers);

• the number and type of seating (taking into account the age of the child);

• view and length of suspension (ropes, chains, cables, etc.);

You can make an additional drawing with the petal breakdown and the size of the blanks.

The dimensions of the wooden swing are determined on the basis of:

• the age of the child - the length of the suspension, the size and configuration of the seat depends on it;

• growth - determines the length of the suspension.

You can make a swing "on the grown", then:

• the optimal seating width is 600 mm.

• seat height over ground - 500 - 550 mm. This will allow on the one hand to dig and stop the swing on their own, and on the other - it will not interfere with riding;

• height from seating to crossbar - 1 600 mm. To ensure that the child is convenient to rake standing;

• the overall height of the swing from the surface of the Earth to the crossbar is determined taking into account the thickness of the seating.

Council. Seat and suspensions must withstand the weight of the child. For practical considerations, it is better to make a margin of strength up to 100-120 kg (several children or child and adult).

3 Stage - Material for Wooden Swing

To make wooden swing with your own hands you need to choose the right wood. It is better to give preference to solid wood breeds - oak, larch, or cheaper from ate, pine, birch. The main thing is that the sawn timber is dry, good quality, without dropping bitch, holes and other defects.

Depending on the type of carcass, you need to prepare:

• for the P-shaped frame - 80x80 or 100x50 timber - 2 pcs. For all other skeleton types - 4 pcs.;

• for crossbar - timber (log) in the same section - 1 pc.;

• for seating - Boards 600x300x25 - 1 pc. For the manufacture of seats for children up to 2 years, additional elements are thought out - back, knobs, fences;

• for suspension - a welded chain with an anti-corrosion coating or a robust rope (the one that climbers use) is suitable. The suspension length is equal to two heights of the swing. On average - 4 500 mm - 1pc;

• for fastening the frame - Tree Self-tapping screws 80x4,5 - 40-50 pcs., As well as the screws 50x3.5 - 250 pcs.

• for fastening the suspension - carbine, suspended hooks, steel corners. Quantity - depending on the fastening method;

• for wood processing (protection) - primer;

• for decor - paint or wood lacquer.

• for concreting racks - cement, gravel and sand (for mounting a P-shaped frame).

It will take from the tool: screwdriver, saw, planer, grinding, level, drill, plumb.

4 Stage - making homemade wood swing for giving

From theory, we turn to the practical implementation of the project. Consider how to make wooden pendant swing do it yourself.

Preparation of a place to install a swing

After selecting the place you need to remove the remnants of the construction trash, remove spiky shrubs and align the platform.

Note. Some users advise concreting the platform under the swing, motivating this by the fact that in the place where children are repelled from the ground, a pit appears in which water accumulates. Others believe that it is a smaller of trouble. After all, the fall on the concrete basis is a serious risk.

Timber preparation

Street hanging swings made of wood should be safe for children. Therefore, you need to pass each workpiece to eliminate the appearance of the zoom. And also cover all the wooden elements of the primer. You can rejuvenate ready-made swing, but then there is a possibility of wood destruction in connecting places.

Installing a frame for children's swings from a tree

As it was considered above, there are several ways of the framework of the framework. Therefore, consider the main nuances of the installation of each of them:

P-shaped frame. The arrangement begins with the fact that the vertical racks and the top jumper are fasten. Then you need to dug two recesses (the depth is 1/3 from the height of the support). Pour on the bottom of a chump-sand pillow, install the rack, concrete, wait for the concrete, and install the suspension with the seat.

Note. The lower part of the supports is mandatory to be processed by any means that will prevent the rotting of the wood. The most budget and reliable option will be the use of spent engine oil.

L and A-shaped swing frames are usually also collected on Earth. PERFORMANCE ORDER: Four supports are drove at an angle for a more reliable connection. Then to the node to attach the upper crossbar. In the case of the A-shaped frame, the crossbar is added, which makes the design more stable. Then the assembled frame is installed on the prepared place. For reliability, you can pour into the soil (previously treated with primer against rotting) or fasten the lower part of the supports to the ground with a long rod and a bracket.

X-shaped frame for swing. It is done similarly to the previous one. Only the ends of the supports are nothed down, but they are fixed with each other. In the formed upper corners, the jumper is stacked.

Note. In order for the installed X, L and A-shaped frameworks to fall into the soil, users recommend concrete patch under the base. Thus, the probability of saccy of design is eliminated and its mobility is saved.

Weak place x, l and a - shaped frames at the vertical junction site and jumpers. To make this node, long screws are used, but as they say the masters, it is advisable to use the cap-nozzle of suitable sizes. The photo shows this item and the place of its installation.

Council. Bold the screws in the manufacture of the framework are necessary in this way: first drill the hole with a diameter of a little less than the diameter of the self-press, and then collect the blanks on the self-tapping screw. Some masters advise to reliability to sneak off the billets, while others recommend to enhance the node by using metal linings or wooden struts.

Sitting device for swing

The method of manufacture and seating material for swing is determined by the child's age. Children are not demanding of the design, they will fully arrange a seat of a tire or simple blackboard. In this case, you can count with a dozen ways to manufacture.

Mounting swing to the crossbar

Suspension (cable, rope or chain) is attached to the crossbar. Suspension is a swing assembly for fastening the swing on the crossbar. The suspension accounts for the maximum load, which means that special safety requirements are put forward to it.

Note. The seating is performed only on the chains or cables, and not on wooden or metal suspensions. Garden swings are designed for adults and do not need to be adjustable, and the country's cottage swings for children need to be corrected as the child grows.

Fastening the suspension of swing and seats can be performed in several ways using different fasteners:

throw the rope through the crossbar and tie or fasten the bracket;

with metal linings that are attached to the crossbar at the top; with the help of carbine.

Material prepared for WWW.Site site

By screwing into the crossbar of the anchor and fastening the suspension to it.

By covering timber.

5 Stage - Decorative Design of Swing

Decorating a wooden swing performs a dual function. On the one hand - protects wood from exposure external factors. On the other hand, the original swing design forms a beautiful and bright element of the playground. The main rule - paints and primers must be high quality and safe, so as not to harm the health of the child.

As an additional decor, you can install additional jumpers on the frame, which will increase it, and the children will have a staircase that will be interested in those who expect a queue for skating.

Wood swings care

Care is to check:

• attachment nodes;
• suspension;
• seats;
• quality paintwork.

• report swing the load greater than the one for which it is calculated;

• avoid shock loads (sudden sitting on the seat);

• try to distribute weight on the seating plane (not to roll);

• ride perpendicular to the support. Suspended swings are designed for riding along the supports;

• stick to the moderate amplitude of swinging to avoid overturning the loose swing.

Conclusion

The reliability of the installation of suspension and seating, and at the same time the strength of the entire design is checking on themselves. If nothing is deformed under the weight of an adult, then the child will endure. Nevertheless, wooden swings for giving need a periodic examination of the main node and fastening grounds.

Any caring parents tend to ensure that the pastime of their Chad is as saturated as possible and interesting. How can you diversify the child's leisure during the holidays at the cottage? The easiest and most expensive option is to make children's swing do it yourself. Especially since it is not at all difficult, if you show the smell.

How to choose a material for making a swing

Of course, in order to independently make country swings, you need to possess not only certain construction tools, but also the skills of working with them. Therefore, before you decide on construction, it is necessary to appreciate your strength. Swing for cottage from metal is definitely a fundamental building.

But in order to build it, you need to know how metal behaves in certain conditions and need to own welding apparatus, grinder, hacksaw.
If you do not feel confident enough to implement such a global project, then you may be more suitable wooden swing for giving.

A tree is a simpler material in processing, and even non-professionals will be able to cope with construction. Just choose to build enough durable wood variety. Suitable fir, cedar, birch, oak. And make sure that there are no defects - bitch, holes, etc.: After all, not only comfort depends on it, but also the safety of your baby. Of course, you can use as a material for manufacture and plastic.

However, its only dignity is low cost. It does not apply to environmentally friendly materials. In addition, if you want your swing for the garden not only kids, but also adults, plastic to you, unambiguously, does not fit. However, often swing in the cottage can be built literally from what is at hand - you yourself are perfected.

\u003e Simple ideas for creating swing do it yourself

Wooden Palet, which remains you after construction workmay become an excellent basis for swing. You also need a solid rope and a fairly strong tree, where you can place a swing. If there is no suitable tree, it will be possible to insert poles-supports.
In very simple sight You can tritely strengthen the rope on the pallet and tie it to the support. If you wish, you can complicate the concept, connecting several palaces among themselves, building a back with a swing, having painted beautifully.

2. Snowboard swing or skateboard

Snowboard broke, and the board remained from him? It can become an excellent basis for street swing for giving. Despite the seeming brittleness, the snowboard is very durable and withstands heavy loads, so it is ideal for the role of a seat a swing. The main thing is to securely attach it to the ropes and hang on the support.
If the roller mechanism remained on the skateboard, it makes the manufacture of a swing with your own hands an even simpler task. You will be enough to build from the rope of the loop and turn in them a skateboard: the wheels will fix the ropes and hold them from slipping.

This type of swing can be attributed to the classics of the genre. Construction Everything also begins with the construction of the BRUSEV-supports - wooden or metal, and the transverse beam between them. In the upper beam screwed bolts with rings. One end of the rope is attached directly in the tire, and the second - it is done in the rings. You can use chains instead of ropes.

As a support, all the same tree can serve as a substantial acceleration process. country swing do it yourself. This option is reminiscent, rather, Tarzankka, and does not pretend to be special aesthetic.
In general, if there is no special desire to try global construction, as a handy material for the manufacture of children's swings for giving, anything can be used:

• logs;

• bars;

• plate;

• even the seat from the chair or chairs.

The main thing is to give will Creative.

Photos of various swing for giving