Garden swing - This is an excellent fun, leisure and relaxed game. There are always many joy and child laughter around them. By placing them on the site, you will get another place for a pleasant time. This is especially true for young parents. Observing uncomplicated rules for security and creating a design, make children's swing do it yourself.

Children's game in the fresh air has an indispensable attribute - this is a garden swing. Having attached some efforts and creative smelting, adults under the power of creating a fabulous element of a magical garden. After all, childhood - the time of wonders and fantastic discoveries! It is not necessary to buy large game complexes or entertainment sites. You can quickly make with your own hands a simple design, and as a result, the child enjoys swinging, and you are a ringing child laughter!

Most frames for the street with their own hands are created only for one child. We highlight types of main parameters:

Body position

Design with your own trees, for example, can provide for two positions - sitting or standing. The first option is suitable for kids to school age And, as a rule, it is additionally equipped with a backrest and fastening between legs in front. Otherwise, the risk for the child increases increases.

Children's metal swings, on which you can stand, are more designed for teens. In this case, the side mounts are not needed. The child becomes legs on the board, and his hands holds for the rope cables. Additionally, they need to attach across wooden children's hands.

Method of fastening

There are two ways to make a swing for a baby, - suspended and skeleton. The easiest - hang the finished board to the top point of the support. It can be located both without a canopy and under it.

Homemade frames require first to build a seat, which is then suspended on pre-installed supports. This process is more time-consuming and long, but these garden swings are distinguished by reliability and durability. And the photo is confirmed.

Process preparation

Safety

For a child of any age, security is chief Criteria. Make sure that there are no solid vertical supports or buildings about which you can hit. Children's suspended swings require the bottom of the sand or soft grass. In extreme cases, from the tree, if it is a floor of the veranda. Install them so that the child is in mind.

When choosing a material, take into account its ease and security. After all, children's wooden swing, like any other, use intensively, therefore there is always a risk of bruise. To reduce it, set the back, side and front mounts. Be sure to be, if you plan to roll small children up to 7 years.

To mount, choose the ropes, they will not be warm and you can not shove your fingers. Regularly check the integrity of all parts, including those made with your own trees. Lubricate children's swing metal.

A quiet place that pacifies after a hard work, relieves stress and raises the mood - aesthetically ...

Planning (installation site and drawing)

What is more important for you - a plot or garden swing? If the garden then pick up a free area, away from buildings and flower. It can be distressed from the rest of the site with a low chief or border. At the same time, the appropriate space may well be in the depths of the garden, beyond the limits of visibility. Street swings for children in such a place will be unsafe.

Baby swing do it yourself from different materials May require a small restructuring. Perhaps it will be necessary to free the veranda by removing everything too much, severe and fragile. Or cut the old tree, threatening with a drop of drunk branches with the next strong shower.

The playground next to the house is desirable to do with a canopy or under a tree with a wide crown. When in the summer, the children frolic in the yard, take care of the shelter over their heads from scoring sunlight. Well, if it is a veranda or pergola, more about the manufacture of which see. Kids swing for giving place, taking into account the radius of swinging, so there should be free space nearby.

To understand how to make baby swings in the country, do it yourself, pre-sketch design on paper. Choose the necessary form. Below can be considered typical drawings and options, describing in detail the process of creating a swing for children and adolescents.

Instruments

Garden swings and devices for them depend on the material.

Standard you need:

• Roulette and ruler.
• Pencil or chalk for marks.
• Nails, selflessness, nuts, galvanized bolts, screws.
• Garden drill, shovel.
• Cement, sand, crushed stone.
• Primer and paint.

Wooden children's designs will also require:

• Saw, jigsaws.
• Metal corners for fastening.
• Chain or rope for suspension seats.
• Hammer, drill.
• Lesseing antiseptic.

Creating a swing with your own hands, you must have the following:

• Metal hacksaw.
• Bulgarian.
• Welding machine.
• Chains, carbines.
• Pipes, corners and stripes of the desired size.

For tires, you can limit the fasteners and chains or use a solid rope. It is suspended to the upper support.

Suspended swings with their own plastic hands can be made of similar materials. Most often they are suspended for ropes or ropes.

If the main material is a fabric from which the seat for children's swings is sewed, then the wooden bars of small length will also be needed.

What material to choose and how to make

Wood

It has warm, strength, withstands frequent use. At the same time, easy, well swing and does not hit the child much when falling. Locked the Wooden Seat, you can paint the garden swing in almost any colors.

Good, suitable under the overall style of the landscape Wooden swing on cottage plot - This is a joy for children and for ...

Children's swing from a tree with their own hands will be just the place where you can show a maximum of fantasy, given the preferences of the child. For example, a standard design for children in the form of the letter "g" to build with the help of curved wooden sticks, bars, vines, giving the form of a revived fabulous person.

Or use the jigsaw to make the character you need from the finished log. Wooden children's seats can be a simple table attached to the ropes. But they will remember the child forever, and he will be happy to spend time here. Especially if you combine such a construction with a slide.

Experiment with your own seats with a tree. In addition to a simple rectangular board with a back or without it, you can build a seat in the form of a circle, plane, flower, horses. An ordinary chair without legs is suitable.

Metal

For swing, this material is used less frequently, since it requires a long processing spent resources. And the finished design, although it is more durable and static, weighty by weight and is traumatic. For kids, it is not recommended to install a swing of metal on their own, but they will come for older children.

Well, if children's metal swings will be covered with soft material, pillow or rope. It will not only soften the blow, but also prevents excessive heating of solid parts into the sun. To do this, you can install a row of durable fabric or polycarbonate.

Tires

As well as tires, used tires give an adult rich field to work well for his beloved chad. This material is easy to handle, and work with it will take you at least time. Tires are cut with a hacksaw or a special knife to get different shapes. Pluging them with bolts and hooks for the hooks, we get the economical option for the street with your own hands.

Take into account the weight of the child, because such a material can come into disrepair faster. Baby swings for giving from tires are well suited to the kids of younger and middle school age. And here little child It will be unsafe, especially in designs without backrest and additional fasteners. In addition, in summer, rubber is heated and can grasp gentle skin, contribute to the occurrence of diameters.

- A very budget way to entertain children and adolescents. They can be easily moved from one place to others and remove for the winter to the utility room.

Plastic, skateboard board

The finished seat of plastic in the form of a chairs or a rectangular board is fixed with or cable. The probability of getting injured from collision with plastic is minimal. Such swings are children for giving require constant attention, because when the temperature drops or on the weight of the child, the material can crack.

How to make a swing on your own board from Skate? Remove wheels from it and make ropes. It is swinging standing, holding hands for wooden transverse crossbars, employees and additional support.

Fabric, Bacchevka

Durable fabric or tarpaulin is a find for those who love to do everything with their own hands. Mounts are attached to the stitched piece of fabrics, as a rule, wooden. Such children's suspended swings are made in the form of a hammock, a cocoon with holes, a stool or cone.

Baby swings for giving perfectly suitable for kids. They quickly fall asleep in these soft cradle. A more adult child can relax with a book or player.

Baby swing do it yourself from a circle and rope. They are also suspended for the ropes, and the seat is a circle without a back. Its bottom consists of ropes woven in a circle or crosswise. Weaving can take a long time, but this option is convenient, safe and universal. The swing is attached pretty close to the ground, and the probability of the bruise when falling down almost to zero. A wide surface allows you to sit on it, and lie.

Build children's swings for giving with their own hands, if possible, cycling the child and turning the whole process into the game. So you will pay good relationships with the baby, and your credibility will grow in his eyes. Whatever the result you do, it will remain the subject of pride and adults, and children. Swing Garden children - these are touching memories for a long time!

Good, suitable under the overall style of the landscape. Wooden swings on the country area are joy for children and adults. Purchased public models are usually not distinguished by quality and variety. More interestingly and it is more useful to approach the process yourself and make country swings, giving your site a unique flavor. After all, nothing particularly difficult about it.

Wooden swings are divided into three main types:

• • frameworks, standing on stationary supports (classic option);

Frame swings

• • suspended on ropes or cables, such as "Tarzanka";

Suspended swings, "Tarzanka"

• swing- "Scales" or balancing. This type of swing for two.

Any model beats in such a way that all neighbors will envy, and households will escape the garden or yard to the beloved corner.

Where to locate?

If a choice is made in favor of the classic "Tarzanka", hang on the nearest tree, inspiring confidence in terms of strength. When selecting a place for other types of designs, the following factors are reasonably taken into account:

• sufficient distance from walls, fences, trees, wires, prickly bushes and pointed objects;
• illumination. It is desirable that the sun falls into a plot until the evening. So wooden Material insured against refurbishment;
• the surface relief is better to immediately pick up even so that no additional work has to be carried out;
• the place should not be "blowable all winds". Drafts are fraught with rapid colds.

Well, if under the swings there will be sand or soft lawn. This will help you not get a serious injury about stone or fittings.

Drawing

You can do without it. But if there is a serious project with a claim for durable service, then the drawing of the swing for considerations of saving material is better to prepare. Designer homemade swings are not difficult.

General provisions that reflect the drawings of garden swings from the log:

• frame structure;
• dimensions. For swing is the height and area of \u200b\u200bthe foundation;
• places of fixings and reinforcing elements must be marked;
• the number of seats and their type;
• the length of the suspension and their appearance.

Example of drawing wooden swing

Selection of material

It is important to focus on the quality of the material from which the swing will be made. High-quality wood will not only provide the durability of the design, but also guarantees the safety of use.

Do not deceive expectations such rocks like cedar, oak and larch. Also strong enough spruce, pine and birch.

Lumber must be chosen dry, without traces of mold or foci of rotting. There should be no drop-down bitch, cleaners made by pests of holes. It will not be necessary on the wooden frame of large volume, so you can check each board and timber.

Instruments

For the manufacture of wooden swings you will need:

Strong branch

• mixture for concrete solution;
• nails, self-tapping screws, bolts, corners (in accordance with the project);
• roulette and plumb;
• hacksaw;
• a hammer;
• antiseptic for handling wooden parts;
• schlifmashinka (or drill with a nozzle);
• screwdriver.

This is the main arsenal. When everything is ready (material, drawings and tools), we begin to make the gardens swing from logs.

Wooden Swing Care

1. Annual processing of special store or painting will save the product from recessing and pests.
2. From the end to the beginning of the season, it is necessary to cover the swing with a waterproof material.
3. Do not allow the appearance of rust on metal details.
4. Do not give disproportionate loads.

Such swings will delight not one generation, subject to the observance of these simple and understandable rules.

And if the design of your garden will be better fit, then make them will be harder. But they will serve you longer.

Summer season is the sun, fresh air, relaxation and entertainment time. Especially for children who, with great joy, spend all day on the street or in playgrounds, where the income attribute are swing. This is a simple and extremely cast adaptation can be built in the country area with their own hands. Such simple thing It brings so much happiness to the child that any effort on its manufacture will be commemorated to you.

Next will go options for self-making a swing, so the article for the most part addressed to men. But, if you are a woman, and you have skillful hands, we also advise you to read everything to the end, and perhaps you will sincere something new.

The simplest design of garden swings for giving, known to us since childhood is the design of the letter "P".

For its manufacture, you need to take two wooden or metal columns of arbitrary length and diameter under the base. Their size depends on the intended load on the swing. Poles are burned in the ground to a depth of 80-100 cm. Another option is to use two curved metal pipes, I swallow their ends to the ground. Next, it is necessary to install a horizontal crossbar from the steel pipe of a similar diameter on the poles.

Strengthening support pillars.

To secure metal parts of the design, welding or double-sided large diameter bolts will be needed. On the crossbar using a rope or cables is mounted wooden seat. To do this, you can take the usual wooden board 3-5 cm thick, handle its plans and paint bright paint. Swing are ready. They are suitable for both adults and for children over 5 years old.

Gazebo - a swing in the form of a boat.

Baby swing do it yourself

Simple and comfortable kid swing

To make a swing for giving for a child for three to four years, it is necessary to make it necessary to make a comfortable and safe seat. For its manufacture you will need a small square piece of plywood or square board with a length of 40 cm of solid wood: birch, oak or elm. In addition, there will be five wooden pine planks or any other soft wood, with dimensions: 40 cm of length, 2 cm thickness and 6.5 cm wide, four copper tubes with a diameter of 2 cm with a length of 12.5 cm - one pair and 6.5 - Another couple. And two are the same along the length of the strong cable.

Drill in each corner of the seating boards and in four holes with a diameter of 0.6 -1 cm at a distance of 4 cm from the edges. The fifth bar is fastened in front of the swing and helps the child hold on and not fall out. In this bar, also drill holes with a diameter of 1 cm so that the plank can move freely up and down the cables.

Swing with a seat from the chair.

The length of the cables must be measured depending on the height to which you want to hang the swing. Both cables must be done on the one hand in a short tube, side planks and backrest bar, then through the front part of the side planks to the front bar and a long tube and, finally, through the seat in the seat. The ends of the rope firmly lock under the seat and balance the rope. Fastening the swing is carried out with the help of ceiling hooks on the horizontal bar.

Swing - "Woven Pautinka."

Garden swing - "Rocking"

Very popular and simple in the manufacture of wooden swings for the cottage - "Rocking". It will take for its manufacture wooden bar With a square cross section, a sheet of multilayer plywood thickness of 18 mm, waterproof glue, self-tapping screw, color paint or varnish. For the manufacture of swings of this type, the timber is poured into a balancing shaft with a length of 2 m and a rack with a height of 80-100 cm, and two arbitrary sizes are cut from plywood. Dimensions should be calculated on paper and make a drawing, and then transfer them to a sheet of plywood and cutting into the contours using an electrol bike. Entry paper trends all the edges of the parts, and walk on the beam.

The name of the components of the swing.

Electric drills drill in racks through holes For fastening the shaft, and at its ends do outdoor threads. Insert the shaft into the holes of the racks and secure the threaded connection from the axial offset. To do this, screw on the carving of washers and nuts and stroke the threaded connections in any known way.

Collect all the elements of the swing on the screws, feed the antiseptic and cover with two layers of color paint or varnish. Check the build quality - swing should not be flip or unstable. For greater comfort, you can sew soft pillows on the seat and backs. It remains only to insert holders to the ground to a depth of 50-60 cm and children's swing for giving are ready.

Joy and benefit for children and adults.

To give a child joy for all summer, it is enough to collect a swing for giving with your own hands. They are not so invalid, and very useful to children, since in addition to entertainment, they train the muscular system and the vestibular apparatus of the child.

Any caring parents tend to ensure that the pastime of their Chad is as saturated as possible and interesting. How can you diversify the child's leisure during the holidays at the cottage? The easiest and most expensive option is to make children's swing do it yourself. Especially since it is not at all difficult, if you show the smell.

How to choose a material for making a swing

Of course, in order to independently make country swings, you need to possess not only certain construction tools, but also the skills of working with them. Therefore, before you decide on construction, it is necessary to appreciate your strength. Swing for cottage from metal is definitely a fundamental building.

But in order to build it, you need to know how metal behaves in certain conditions and need to own welding apparatus, grinder, hacksaw.
If you do not feel confident enough to implement such a global project, then you may be more suitable wooden swing for giving.

A tree is a simpler material in processing, and even non-professionals will be able to cope with construction. Just choose to build enough durable wood variety. Suitable fir, cedar, birch, oak. And make sure that there are no defects - bitch, holes, etc.: After all, not only comfort depends on it, but also the safety of your baby. Of course, you can use as a material for manufacture and plastic.

However, its only dignity is low cost. It does not apply to environmentally friendly materials. In addition, if you want your swing for the garden not only kids, but also adults, plastic to you, unambiguously, does not fit. However, often swing in the cottage can be built literally from what is at hand - you yourself are perfected.

\u003e Simple ideas for creating swing do it yourself

Wooden Palet, which remains you after construction workmay become an excellent basis for swing. You also need a solid rope and a fairly strong tree, where you can place a swing. If there is no suitable tree, it will be possible to insert poles-supports.
In very simple sight You can tritely strengthen the rope on the pallet and tie it to the support. If you wish, you can complicate the concept, connecting several palaces among themselves, building a back with a swing, having painted beautifully.

2. Snowboard swing or skateboard

Snowboard broke, and the board remained from him? It can become an excellent basis for street swing for giving. Despite the seeming brittleness, the snowboard is very durable and withstands heavy loads, so it is ideal for the role of a seat a swing. The main thing is to securely attach it to the ropes and hang on the support.
If the roller mechanism remained on the skateboard, it makes the manufacture of a swing with your own hands an even simpler task. You will be enough to build from the rope of the loop and turn in them a skateboard: the wheels will fix the ropes and hold them from slipping.

This type of swing can be attributed to the classics of the genre. Construction Everything also begins with the construction of the BRUSEV-supports - wooden or metal, and the transverse beam between them. In the upper beam screwed bolts with rings. One end of the rope is attached directly in the tire, and the second - it is done in the rings. You can use chains instead of ropes.

As a support, all the same tree can serve as a substantial acceleration process. country swing do it yourself. This option is reminiscent, rather, Tarzankka, and does not pretend to be special aesthetic.
In general, if there is no special desire to try global construction, as a handy material for the manufacture of children's swings for giving, anything can be used:

• logs;

• bars;

• plate;

• even the seat from the chair or chairs.

The main thing is to give will Creative.

Photos of various swing for giving

How to make children's swing for giving with their own hands? What materials will be required for this? Together we will look for answers to the questions we set. Let's start with the fact that in the country you need not only to work, but also fully rest.

While parents are engaged in planting plants and weeds, the child can be shown on children's swings.

Construct wooden children's swing do it yourself

Selecting the children's street swings for their baby, parents must take care of them to be safe for him.

Tip! To guarantee reliable protection A child from falling from a swing, front of the chair needs to be installed a special restrictive bar.

Types of children's dacha swings

Street swings can be made of plastic, metal, as well as from wood. Wooden swings for children are considered the most environmentally friendly. In addition, similar models have durability, they are easy to assemble, have aesthetic appearance.

Attention! In order for children's swing, made by their own hands, served their owners for a long period of time, it is important to treat wood with a special protective composition.

The seat for children's swings can be made from the boards, use the old skate, car tire to work, and choose other options, implementing their creative imagination.

The most reliable professionals call street children's swing for giving made of metal. Manufacturers of children's swings offer models on chains, stationary options that can be put on the ground.

Depending on the design, you can choose for children playground Welded, collapsible, as well as forged types of swing for a child.

Original pendant swings, whose seat is made from metal rings, will become a true decoration of the children's playground.

Attention! Plastic options Children's country swings are suitable only for young children.

Manufacturers offer their bright colors so that the kids enjoy the rest. Plastic is not resistant to reduced temperatures, so winter Such designs need to be removed inside the cottage. To secure the baby from damage, it is better to select such models that use a tissue seat that has an additional enclosing structure throughout the perimeter.

Fixation options

Currently you can pick up frame and suspended species Swing for home and cottage. The photo presents the original children's town, which can be made with your own hands on panstone.

In order to create a kid a comfortable stay on the country area, you can use various methods. In addition to the benches, arbors, also an important place occupy a swing, made by the hands of caring parents.

Using step by step instructionsOffered by professional craftsmen, you can make reliable and original designs for your girls and boys without any special problems.

As traditional materials that are used to create a swing, we note wood and metal. In order to increase reliability, improve the external characteristics of the design, many masters try to combine these materials, use decorative forging to decorate the resulting design.

Tip! To make a seat, you can pick up a variety of branded materials left after the completion of the main construction work on the household plot.

For example, you can use plastic, bars, old chairs or armchairs (without legs), reliable rope. For example, owners of personal vehicles can use old car tires in the manufacture of swings.

Tip! In order to create a harmonious image on the site, it is also possible to create original flower beds from old tires.

Original swing options for playgrounds

there is different variants Comfortable and original designs that can be decorated with a landscape on any household plot.

Currently, manufacturers offer several varieties of swing. Mobile products are found in a lightweight form, so they can be transferred to any particular problems in any place on the plot, and for the winter to put into the house.

Family models differ from the analogues with an impressive design. Their device is similar to a bench that has no legs, but has a sufficiently massive back. Due to the fact that such structures have impressive parameters, you can fit on them all family members.

To ensure complete safety of family swings, it is necessary to make a special P-shaped frame. Locks will be strong cables or thick chains.

Tip! If you pull the awning over the design created by the design, or make a mounted roof, in which case you can spend leisure even in the rain.

For the smallest daches, you can select products of products that are made in the form of suspended chairs or original boats. Such structures are presented with strict requirements, especially the framework of the frame.

Attention! Swinging children until the sixth year old should be carried out only under the supervision of parents.

The child is sure to be fastened with special belts so that he does not fall out of the seating, did not get injured.

Variants of country swing

With your own hands, you can make a variety of options for children, taking into account the age of kids, the presence of free space, materials for work.

There are following design options:

They are fixed on a crossbar made of durable metal. Alternatively, professionals offer to use a thick tree. In the process of direct exploitation of this structure, the baby will have a sense of real flight over the ground. Such models are suitable for those who like to spend free time For reading books.

The hammock is an excellent option for complete relaxation, enjoying nature, putting into order of his thoughts and feelings.

Attention! The hammock is designed for weight no more than 200 kilograms.

They are such products when operating which is not necessary

use some additional crossbars. Among their main advantages, we will select the minimum time consumption for the installation of the product, as well as the installation on the selected area.

They consist of a seating that is suspended into several chains or cord. The suspensions are fixed on the sides of the seat. For independent manufacture Such structures, special attention should be paid to the choice of solid and reliable materials.

Similar structures are able to fit several people at once. They have a special design involving fixation at one point. Thanks to this fastener, the chaise lounge can be installed not only outside, but also inside the cottage. As a material used in the production of lounge chairs, manufacturers choose a special hardened steel. A visually finished product has an air look, but in reality the chaise lounge is durable and safe for vacationers.

In order to create a swing from a metal on their own on their own household plot, first needed to be stockpit with certain materials and tools. What will be needed in order to deliver a real joy with your own hands?

Also, a variety of fastening elements (bolts, nuts), a set of discs for the grinder, cement, crushed stone.

After preparatory stage It will be successfully completed, you can proceed to the preparation of pipes. For lateral racks, two pieces of pipe are needed, the length of which is two meters. On the crossbar there is enough one pipe up to two meters long, and you also need to prepare two pipes for the base.

Tip! In the process of cutting billets from pipes, they can remain burstles. To remove them, you can arm with abrasive materials or a file.

After all the elements of future swing are prepared, you can begin with their welding at an angle of 45 degrees. Then at the right angle welded a central crossbar.

To establish the resulting design of the swing, you must prepare two trenches. The width of the recesses made in the soil should be sufficient to accommodate tripods, the depth is allowed from 0.7 to 0.8 meters. Between the trenches made should be fitted with the product.

The support part of the swing created is set precisely in the recess. At first, the layer of sand is placed in it, it is rambling it, then they put the product itself, poured the legs with a layer of concrete.

Scenes are fixed to the frame of the swing, the appearance of which depends on the taste preferences of the owner of this site, its material capabilities, as well as from the age of children for whom they develop such swings.

Conclusion

With the right selection of the type of swing, their size, form, you can create a real one in your household plot children's Corner. At the time, when parents are engaged in growing vegetables and fruits, the kids will have the opportunity to hang on the original homemade structures, to fully experience the uniqueness of the summer holidays.

No matter what kind of garden swing has chosen parents for their babies, these products must be primarily safe for children.