Ventilation and ventilation in the kitchen have great importanceTherefore, the stove in good civilized kitchens is installed. Together with this, the task arises - to calculate what height should be hidden, so that it works as much as possible and did not port appearance premises.

Standards

There are some rules and recommendations related to the safety and efficiency of the exhaust work. On the one hand, it should maximize the smells as much as possible, and on the other hand, the distance between it and the slab should not prevent the work of the housewife and create a fire-hazardous situation. We suggest you look at the Table Settings Table Standards.

The height range is not accidental. Choosing an accurate level, you will be repelled from three factors:

• hood power;
• design, room configuration;
• the growth of a person who most often stands at the stove.

At your own discretion, you can slightly increase the installation height, but it cannot be reduced.

First, it will make it difficult to work at the slab, the cook will constantly hit his head, it will be uncomfortable to look into the pans. Secondly, the extract can be very hot, and in some cases there is a possibility of fire on the soot on the filter.

In the instructions, it is usually indicated what should be the distance from the slab to the exhaust, which greatly simplifies the choice. In addition, if a specialist will be engaged in this question, he will advise you as it is better to install the entire system, including the location of the socket and the air duct.

When choosing an exhaust, it is necessary to take into account that manufacturers in most cases indicate the ideal parameters in the technical passport, in which the free air flow passes through the blade. In fact, the efficiency of work will be less due to the resistance of the filters (for recycling units) or the insufficient section of the ventilation channels (in the case of setting the exhaust type systems). In the first case, it will be enough to calculate the productivity according to the classical formula P \u003d QX12, where q is the volume of the kitchen in cubic meters, and the number 12 corresponds to the recommended air exchange per hour and increase the resulting value by 30-40%.

If the household appliance will work in exhaust mode, then it will not be completely correct to consider its performance. The fact is that no matter how big the kitchen, the extract will miss through itself only a certain amount of air - it all depends on the pressure being created, as well as the cross section and configuration of the ventilation channel. According to the existing SNiP, the exhaust highways have a cross section of no more than 150x150 mm, which means that if you need to remove 500 cubic meters of air, then the exhaust unit must create a pressure of at least 8 pa. If you take into account the complex configuration of the ventilation mines, as well as obstacles in the form of a decree of bricks that have fallen during the construction of bricks, speakers of the solution and thresholds at the junction of the reinforced concrete blocks, the bandwidth of the channels will decrease by more than 10-20%.

Calculate the exhaust parameters can be found according to the special formulas (the methodology can be easily found on the network), or to use a graph of the dependence of productivity from the pressure of the unit and cross-section of the exhaust channel. One of these diagrams is given below.

Choosing a drawing in terms of performance, should be based on the maximum pressure indicators and the ventilation channel section

FEATURES OF MONTAGE

Measure the distance between extractor and hobs It is necessary from the lowest edge of the exhaust to the burners. It should be attached strictly by level, since the ability to adjust the position in the future will not be.

Before hanging a hood, you need to pay attention to two more important issues related to the choice of place. It is necessary to take care of the output of gases into the ventilation shaft and about connecting the device to the power supply. In this regard, the location of all communications should be exactly indicated on the kitchen plan.

If you enter into new apartment Or do overhaul, then draw up the plan to consider the installation of all electrical appliances in the house, including hoods. If we are simply about replacing some equipment in the kitchen, you will have to adapt to the current circumstances.

Opinion expert

The judgment that the extract should provide a 12-fold air exchange in the kitchen room, can be considered very controversial. I want to remind you that this unit is an element of local ventilation and is not intended for servicing all the kitchen room - for this purpose, the housing is equipped with a system of general ventilation. Such a delusion often leads to the acquisition of a more noisy and expensive system of high power, while with removing smoke and steam from the kitchen slab can also cope with a much less productive unit.

Another equally common mistake is to embed an exhaust duct into the ventilation shaft. First, the cross section and the hydraulic resistance of the general duct-exhaust ventilation channels will remove not more than 250-300 m 3 / hour, so the lion's share of performance can remain unclaimed. Secondly, excessive pressure in the riser will create inconvenience in the above apartments.

The third fact that matches a lot of disputes is the effect of drawing power to the installation height. It would seem that the smaller the productivity of the unit, the lower it must be installed (of course, strictly observing the recommendations at the lower boundary of the placement). Of course, these judgments are not deprived of rational grain, but effectiveness household appliance A large extent depends on the correct selection of its size, as well as compliance with the actual operating conditions. Practice shows that the installation height should be such that the vertical deviation of the external dimensions of the plate and the hood was in the range of 5-10 degrees. For the minimum allowable mounting height, this corresponds to 10-15 cm horizontally.

When choosing an exhaust, it is necessary to take into account both the height on which it will be installed and the dimensions of the kitchen plate

Extrazhk configuration

When choosing a hood, be sure to pay attention to its size and power. It must completely close the cooking panel, then the work will be effective. For very high people, you can stay on the model made at an angle. In this case, you will be easier to approach the stove.

You probably noticed, the height of the hood over gas stove More than electric. This is due to the fact that a living flame is burning on gas burkers. Soot, settling on the drawing filters, can ignore if you hang the device too low. Over the electric stove distance can be reduced, since it is less fire hazardous.

You can adjust the installation height depending on how the installation is made. There is a special classification of extracts by type of installation:

• dome and fireplace hoods are attached to the wall;
• the island is fixed to the ceiling;
• the angular is mounted in the corner of the kitchen;
• flat - the upper part is fixed in the suspension cabinet, and the back side to the wall;
• built-in - installation is carried out completely in the suspended cabinet.

If the size of your kitchen is small, you can recommend installing a flat or built-in model. They fit well into any room and have enough power to eliminate kitchen smells. In addition, many flat models are pulled out the lower panel, which allows you to increase the area of \u200b\u200bthe device.

When you decide to purchase an exhaust, we recommend measuring your stove width, clarify the area of \u200b\u200bthe kitchen and the height of the ceilings. It is necessary to consider and how many people live in the apartment, how often do you cook at home, smoking anyone in the family. Knowing all these parameters, you can choose the optimal model, and then easily determine the height on which it must be hung.

Cooking in the kitchen requires constant air circulation. To eliminate odors, kitchen hoods with connected to ventilation.

Hood in the kitchen is a necessity in the modern world

Installation kitchen Extraction You can make our own. Before that you need to choose suitable option With a certain power. Hood eliminates dangerous products of combustion and protects the surface of furniture and walls from soot and fatty sediments.

To independently perform an exhaust connection in the kitchen, you should familiarize yourself with the nuances of the installation process.

Products differ in composition, functionality and form. Before installing, it is worth familiar with the benefits of the options offered.

What type of exhaust to choose?

The work of the exhaust structure depends on the internal device. To standard devices. The mechanism of the product contributes to the withdrawal of dirty air through the ventilation channel.

Recycling devices are cleaning air from harmful substances using filtration systems and return it back.

Combined structures operate simultaneously on hood and filtering.

So that the unit worked properly it is necessary to clean the filters every six months.

Combined model very much like housewives

Stand out next species Products:

1. The attachment is attached under the lockers. It is required to recycle air. By installing installation, you need to ensure that the device's device does not send air to the surface of the furniture.
2. Embedded extractor or integrable is characterized by practicality. Similar structures are sold already built into furniture. The devices have functions of air vent and recycling.
3. Desktop products remove contaminated air. The small distance from the stove to the hood contributes to the effectiveness of this process.
4. Fastening the scene of the fireplace type is performed above the stove. Such devices are distinguished by large sizes and functionality.
5. The island products are mounted to the ceiling and are located above the furnace structures that are located in the center of the room. Designed for efficient airlows.

Set the hood over the gas stove at a distance of 800 mm, and above other cooking surfaces at a distance of 700 mm.

The size of the device depends on the design of the plate or oven. For a small electric stove, no overall extract is required.

The size of the exhaust exhaust device corresponds to the stove.

The hood for the kitchen consists of the following elements:

• the engine is considered the main element of the drawing, the tightness of the winding helps to reduce noise;
• for the fence of dirty air, an engine impeller is used;
• the filter of several layers is used for fatty particles and requires frequent cleaning;
• elements are placed in the steel case.

Hood should not be less area hob of plate

Proper installation of construction

The simplest scheme make a hood in the kitchen - it hangs her over the stove between the cabinets.

When installing, you need to take into account access to the outlet and to the opening on the output. It will be necessary to disguise.

Before installing, it is worth considering options. The device case can be hidden in the closet, for a special panel or in a special box.

Selection of tools

Preliminary calculations are carried out, as the difference between corrugation diameters and air ventilation may occur. These designs are mounted tightly so as not to create noise and vibration. The mounting of the corrugation to the wall is also tightly mounted.

To install the design, additional tool sets and special materials will be required. They are preparing in advance:

• details of fasteners, screws and dowels;
• drill with different nozzles;
• screwdriver, scissors and hammer;
• plumb or level;
• corrugation for ventilation;
• mesh and grille for the emerging hole;
• scotch and electrolovik;
• sealant and mounting foam.

Mounting tools are practically in every home

Installation process

Extraction kitchen oblique requires special attention. When it is installed, you need to explore the instructions well.

Before installation work, the height of the drawing above is calculated electric stove. The main stages of installation is:

• fastening the product to the wall;
• connecting a design to the system of air ducts or placement of the filtration device;
• electrical connection is performed.

Installation consists of the following sequence of actions:

1. The device is checked for possible defects. Attention is paid to the backlight and functioning of filters and valves.
2. Measurements are performed for fasteners. It uses the level. The markup is applied under the dowel.
3. Before drilling, power supply in the kitchen zone is turned off.
4. The air vent is made of aluminum corrugation. The device is cut to scissors to the desired shape and mounted.
5. The damper is done - the box for the valve. This uses a thin metal sheet. The product is fastened with a mounting foam into the vent hole.
6. A device dome is created. It is attached on the brackets or is located in the hinged cabinet. Holes cut through the jigsaw.
7. Holes are made, where dowels are attached for supports. Hang hood over the gas stove follows horizontal position.
8. Corrugations using clamps mounted for hood. Shakes are processed mounting foam and sealant.
9. valve. Places a special grid. To connect an exhaust to ventilation, it is required to check the tightness of all connections.
10. The device connects to the outlet and trial starts.

When installing the ventilation design, it is recommended to reduce the number of pipe bends. At each turn, the power decreases by 10%.

The bending of the duct should be with the minimum number of knees

Independent work must be carried out taking into account safety. The following recommendations will help optimize the installation process:

1. Pipes can be flexing at right angles.
2. It is not necessary to narrow the output of the connecting structure, as this will lead to noise when working.
3. The allowable height of the device above the slab is at least 650 mm.
4. It is necessary to perform a regular replacement of filters and their cleaning.
5. If stainless materials are used, then aggressive means are not used when cleaning.
6. Additional installation of the check valve will protect against the return of contaminated air into the room.

Why require regular exhaust maintenance?

After installing the exhaust design, regular maintenance of the product is required. The grease filter must be washed once a couple of months. The coal filter will have to be changed every six months.

Reduces the performance properties of the burning gas stove without dishes. In this case, the frequent breakdowns of the structure occur.

If the device does not turn on, then check the lighting mechanism to control the power circuit. If it is working, then breakdown in the motor or control system.

When the motor operates at one speed, then the causes of the breakdown should be sought in the control mechanism.

It is worth considering the safety of the device.

1. If length network cord Short, then an exhaust socket is installed next to the dome. It is impossible to increase the cord and use isolate for connections.
2. If it is impossible to install an additional outlet, then the extender is applied through a tee. As an option - a separate line from the shield is performed. Specialist should do this job.
3. Since the hood is an electrical device, then you need to ground.

View video

To properly complete the setting, you need to comply with security and pick up a special tool. Quality service after installation will extend the life of the design.

On kitchen plates, the hostess are prepared to 90% of all dishes. This creative-routine process is accompanied by the release of steam, pleasant (and sometimes not very) flavors, small particles of fat and harmful products that are formed during the combustion process. All this is saturated with surrounding space, and first of all the air in the kitchen. Without a ventilation device, it is not to do here, but it should be the distance from the plate to the exhaust to provide cleanliness in little room?
You will be able to find this topical question in today's article.

Optimal height values \u200b\u200bfor different aggregates

The height of the extraction of the hood over the tile is determined taking into account the 2 components - the type of cooking surface and constructive features Equipment location for specific kitchen. It is necessary to understand that the height is never "tied" to the size of the air intake, component elements or the type of device.

The only exception to the Rules - Kitchens with low ceilingswhere to withstand the recommended distance between the cooking surface and the hood is not possible.

note! Experts recommend correcting the height of the installation of the intake design within 10 cm from the nominal calculated value.

Read the same:

Horizontal solutions

To determine exactly what is the height to install the hood, only if there is data on the type of kitchen slab used. Based on this, and the distance between the influx and exhaust is selected. The specified type of equipment is established taking into account a number of parameters (such as a hob, the performance of the intake unit, etc.).

The ratio between the growth of man and the height of the installation of the device

But what distance is considered optimal in the ratio of safety and efficiency?

The norm for each device is its own, but there are adopted standards weighing advisory in nature:

• the distance between the hood and burners of the gas stove is from 65 to 85 cm;
• the minimum value of remoteness from hobs Electric type - 60 cm, and the maximum - 80 cm.

These data are valid only for devices recorded strictly horizontally.

Horizontal type assembly installation video

Installing drawing with your own hands. Yasammogu-TV

Inclined aggregates

Assembly inclined type

When installing models of inclined type, it is extremely important that the distance between the stove and extractor corresponds to the following values:

• from 35 to 45 cm when working with an electric stove;
• from 55 to 65 cm - for gas burners.

In conditions real cuisine Ventilation devices are customary to be installed where the operation is not only effective, but also convenient for the hostess. The above distances are experimentally established values \u200b\u200bconfirmed by years of practice. You can calculate them on your own, that's just a number of variables will have to be taken into account:

• kitchen Square;
• planning features of the room;
• approximate area of \u200b\u200bthe hob;
• performance and drawing type;
• rising family members, housewives.

note! The exhaust unit is simply attached to the electric stove, so the height increases without much difficulties, if necessary. But to lower the equipment below the minimum level is strictly prohibited.

If you do not comply with the installed distance and hang the unit too low, there is a high probability that the device will function in constant heating conditions. And this is fraught with premature failure faithful assistant. In addition, if the extractor is installed too low above the electric stove, it will be easy to use it uncomfortable.

Videos on the installation of an inclined type unit

Installation (installation) inclined exhaust Krona in the kitchen. Full process.

Based on decades of practical exploitation, specialists have formed their own recommendations regarding what height should be hidden. There are inslace rules for aggregates placed above the base of the gas burner. They are specified in the user instruction or installation guidelines that are attached to each model of the exhaust unit.

Here are just a few examples:

1. 1. Products from Bosch are traditionally considered one of the highest quality on the market. The average power of the aggregates is 650 m3 / h. Hang the drawing of the specified performance is better at a distance of 65 cm from the surface of the burner.
2. 2. Decisions manufactured by the Shindo brand are characterized by reliability and availability. For the most part, we are talking about the horizontal device of medium power. The average performance of the devices is 450-500 m3 / h. The kitchen hood is mounted at an altitude of 75 cm above the electric stove. Over the burner open flame, the device should not be.
3. 3. Products of the domestic brand Saturn can not boast of high power, but at the same time performance in 240-300 m3 / h will be enough for the average mistress. Recommended distance to exhaust - 75-80 cm from the burner.

What products to buy and from which brand is to solve only you, but in terms of the altitude of the installation of the aggregates are almost identical. It should be noted that the distance from the surface of the gas stove to the exhaust is determined by a number of important requirements:

• convenience during operation;
• levelation of the probability of self-burning (especially if there are tables with other household devices nearby);
• effective dirty air fence over a stove, stove.

Given the listed requirements, it can be argued that the most secure and acceptable distance from the cooking surface to the exhaust is in the range of 70-90 cm.

RESULTS

Before buying an exhaust device, we recommend clarifying the dimensions of the plate (in particular its width), the height of the ceilings and the total area of \u200b\u200bthe kitchen. Then, you should decide on the number of family members, the intensity and frequency of cooking food. These data will allow more competently pick up the optimal unit. And the height of the hood is indicated in the instructions for each specific model. With certain skills, install it with their own hands will not be much difficulty.

Ventilation devices are prerequisite Clean and comfort in the kitchen. They remove the combustion products from the air and ensure the absence of Gary on the surrounding items. Extracts protect furniture from small particles of fat and a satellular kitchen smell. But in order for ventilation to work reliably and efficiently, the distance between the hood and stove is maintained correctly.

On the principle of operation, the exhaust devices are broken into two types: circulating and equipped with an air duct. Inside the first installed coal filters, through which the air passes, cleaned and returns back to the room. They are convenient for installation in kitchens of small sizes, where there is no room for the air duct. The distance from the hood to the slab in this case is done small.

Second-type exhaust instruments are connected to the ventilation system. With their help, polluted kitchen air is displayed out. Such devices are designed for installation in large rooms. Exhaust devices are also distinguished by design:

When buying a stretching device, it is better to be advised by experts about its power. In a small kitchen, you should not hang a bulky powerful unit, and a weak exhaust will not fit. The size of the exhaust instrument must coincide with the parameters of the hob.

Professionals have developed optimal standard distances from the gas stove to the exhaust. The height of the hood over the gas stove according to the standard is not lower than 75-85 cm, it is installed above the electric stove at an altitude of 65-75 cm. This distance needs to be strictly withstanding.

If you hang the device above, it will absorb the air badly, why the harness and smell will quickly spread all over the room. If below - it will interfere with cooking, while there is a risk of overheating of the device, which will determine its coating or ignition will result. To determine which exhaust device is suitable for the kitchen, you must take into account the following factors:

• type of cooking surface;
• room design;
• the power of the unit;
• technical installation standards.

Installing an exhaust to trust the specialists, but a person confident in own powercan do it yourself. To set an exhaust device with air circulation, you need to calculate the installation height and mark the necessary points on the wall surface.

In the wall, drill holes for fastening elements. Extracts are installed on the tapping screws and hooks that are included.

The aggregates with the air duct are installed in the same way as circulating. After installing the housing, the exhaust pipe is mounted, then turned on to check the work. If the extractor works badly, then inspect the connection locations with the ventilation system and the integrity of the pipes.

Usually, the air ducts are made of thick foil. In order not to disrupt the design of the room, they are covered with PVC or drywall boxes. The most efficient design of the air duct is with short straight pipes and a small amount of knees. If the bends are too much - they will interfere with the passage of air.

The power outlet for connecting the hood is mounted at a distance of 2.5 m from the floor. It should be located 10-20 cm above hinged lockers, left or right from the duct. For hoods it is better to use electrical outlets With grounding. With sharp voltage jumps, they will turn off and protect the device from the brave.

So that the devices work efficiently, you need to follow. There are several care tips:

• After each inclusion, the device needs to be wiped from fat and dust.
• Immediately after cooking, turn off the hood should not. She is left to work for a few more minutes so that she absorbed all pollution.
• Coal filters change every six months.

Competent set hoods Clear the air indoors and ensure the purity of the surrounding items. When buying, you should select a model that corresponds to the size of the kitchen, the interior, preferred by the cleaning method. When installing for efficient and safe operation, the norms of distance from the plate to the exhaust defined in the technical documentation should be observed.

None modern kitchen Does not do without drawing. They are relevant to separate kitchens, but especially important when the apartment is Studio, where kitchen space United with a residential room and all odors immediately spread throughout the room. The article will be told about how to choose the right and how to make an exhaust assembly in the kitchen with your own hands.

Method of installation of drawing directly depends on its model. Therefore, at first it is necessary to consider which types of hoods are.

Types of kitchen hoods

Hood is a device that filters air above the stove or a hob. Classify them in several parameters.

Difference by air purification

• Exhaust with flowing system cleaning. They perfectly cope with the purification of air from oily evaporation and soot. Connect directly to the ventilation shaft. For its maximum efficiency, the exhaust size must match or be greater than the cooking surface. In order for the flowing system to cope, there are powerful and rather noisy motors on it.

• Recycling hoods. They have coal filters. Passing through them, the air is cleared and falls back to the room. Filter cartridges need to be replaced often, it is impossible to wash them. Most often, such a system is equipped with flat models of exhaust.

Tip: Filter is in any type of hood. But somewhere it consists of several metal lattices assembly, which can be washed, and somewhere he is a disposable coal. If its function is clear in recycling models, then in flow hoods, it protects the ventilation shaft from large fat particles.

Important. Modern models of hoods are equipped with a special ARS system. Once something burns on the stove, it automatically turns on. In addition, it has a motion sensor, it costs to get closer to it, the backlight lights up brighter.

Difference by fastening

• Dome or mile. These are high-power devices. Frequently complemented by large functionality. Mount to the wall above the stove, occupying all the space above yourself. Do not need to change filters.
• Embedded. These compact models are practically invisible on kitchen headsetSince embedded in a special niche. Require direct connection to ventilation, which allows them to be perfectly cope with fat and unpleasant odor. Metal grilles and their regular cleaning is required. It is allowed in a dishwasher.

• Island. Require a lot of space, as they are attached to the ceiling above the stove. They are equipped with a powerful engine that can easily cope with the cleaning task. This is due to the fact that they are often installed in the middle of the kitchen, over the working island. Hoods from this category have beautiful designs and a high price.
• Flat. Mounted in the case when there is no access to the ventilation mine. This self-sufficient device is running from the network. It has an average power fan that drives dirty air through replaceable cartridges. The cost of the hoods themselves is low, unlike filters that will have to periodically buy.
• Corner. Relevant if the stove is located in the corner of the kitchen headset. Due to the popularity of the form, it is released with running and recycling systems.

Important . Choosing the model should be paid attention to its height. When installing, it should be located above the gas surface at a distance of 75-80 cm, and over electrical - from 65 to 80 cm.

What hut choose

Extracts are chosen at the design stage of the kitchen headset. It is necessary to know its exact dimensions in advance and the fastening method. In addition to these parameters, it is worth considering the noise level (especially important for apartments studios), a method of management and modes of operation.

Tip: Hood power must be calculated based on total sizes Kitchen facilities.

Power

• As a rule, household exhaust all have almost the same power. But there are interior models that possessing beautiful designare low-power and to clean the air they will need to work for a very long time.

• If the cleaning system is selected for public catering, then the power indicator is very important. What he is higher - the better.
• To accurately calculate power, it is necessary to resort to the formula, which develops from the ratio of the cubic volume of the kitchen and the performance of the exhaust. For example, the length of the kitchen is 6 m, the width is 3 m, the ceiling height is 3 m. Cubic volume is 54 m³. The resulting value is multiplied by 10 and receive 540 m³ / h. It is in this form that the manufacturer is indicated in characteristics. The resulting value is the lower allowable when choosing an exhaust, otherwise the model will not cope with air purification.

Modes of work

• Almost all modern draws Have several modes of operation. In some cases, this is a pushbutton switch that you can select one of the two modes. But more often - several buttons (4 or more). More expensive hoods have sensory control.

Noise level

• The degree of noise affects air performance (the parameter that is calculated at the volume of the kitchen) and the power of the fan. What they are higher, the noise will be higher.
• But, as a rule, inexpensive options are no longer more due to the lower quality of the materials used. Therefore, it is worth checking her work while buying in the store.

At what height correctly set the hood

• On average, its lower edge should be above the plate at 65-90 cm. The lower, the more efficient its work. But if you fix the hood below 65 cm, they can spoil her separate elements Due to high temperature, too strong steam or fat splashes. Yes, and it will be inconvenient. It is possible to put above 90 cm only if the growth of the owner is high and the power of the device is sufficient.

Tip: If the stove is electrical, then the height of the mounting of 65-70 cm, and if gas, then 75-90 cm.

Installation of dome drawing with their own hands

• Dome hoods have a flowing filtering system and require direct connection to the ventilation shaft. For the fan, the socket must be located next to it.
• Before assembled, the kitchen set should already be installed. Given the height and width of the product, there are marking on it.
• Hood must be firmly attached to the wall. Therefore, under the extracts for drawing in the kitchen, the holes are initially drilled (if the wall is wooden) or hollow out by a perforator (if concrete or brick). Dowels insert into them and with the help of bolts, fastening attachments are screwed (which comes in the kit).

• When the frame is fixed on the wall, it comes to connect the drawing with your own hands. To do this, on the upper part of the dome, we dress the corrugation to the duct and hermetically fixed by the clamp. The second end is summarized and fixed to the ventilation lattice. So that he gets hermetically selling plastic circuits.
• With the help of a lit match, check the performance of the exhaust and if everything is fine, the corrugation is closed with a decorative overlay, which is provided with an exhaust.

How to install the built-in hood with your own hands

Unlike the dome hood, embedded almost imperceptible on the kitchen headset. It is installed either in the hinged box or in retractable panel. Consider a simpler way to install in the locker.

• The hinged cabinet in which the hood is built is ordered strictly by its size. These characteristics should be attached to the exhaust instructions.

Tip: If the kitchen is ready, you will have to make up to sizes. And if the cabinet itself can be reduced independently, then its facade will have to be ordered.

• Since the hood is embedded, its lower edge should be by the level of the cabinet. Therefore, the bottom is raised to the height of the device and fasten to it. The weight of the design is quite large, it is necessary to complete the collection of the cabinet especially carefully. The bottom is recommended to fix on Eurovints.

• The cabinet will mask the air duct. It is cut through the electric bike hole for the corrugation. If the ventilation shaft is located in the wall behind the cabinet (so often make in country houses Especially for exhaust), they drink the back wall. If as in the apartment at the ceiling, then the upper one.
• The cabinet is put on the floor, on the side and to it, on the self-tapping screw, screw the housing of the hood. Then everything is deployed in place and firmly fix. Due to the high weight of the cabinet with an exhaust, it is not enough to mount it to the wall on the bolts. To enhance, the metal profile is first screwed to the wall for hinged cabinetsAnd already hanging on it assembly.
• Next to the hood and ventilation are fixed by the corrugation. Extracts are connected to the outlet and experience it for performance. It remains to attach the facade of the cabinet, and the work on it is completed.

How to install flat recycling hood

• This is a suspension design that is hung over a cooking surface. Since the cleaning system in it is recycling, therefore, it does not have an air duct and its form is flat.

• On the housing of the housing there are holes for its mounting on the wall. Under them in the wall perforator, holes are made and a dowel-nail is inserted.
• Sports are attached to them (if they are included) and the extract is fixed on them.
• It remains only to connect it to the network and the extract is ready for operation.

The principle of the extraction of the hood is simple, but there are nuances, which will depend on the quality of its work and ease of use.

How to attach the air duct to hood

• Only as independent construction At home, you can design a vent hole in the kitchen under the hood in such a way that it will be located nearby, and only a small adapter is needed for the connection. In all other cases, either a flexible corrugation, or a plastic hard tube for an air duct is used.
• If the choice fell on the plastic smooth pipe, then fittings are needed in the form of rotary angles. Also required at least 2 adapters that connect the air duct with extractor and ventilation.

• All connections are tightly adjacent to each other, but to achieve complete tightness of them plant them.
• The main advantage of such a pipe is a beautiful appearance that does not need additional decoration by screens and boxes.
• It is much easier to work with a plastic corrugation, but due to low aesthetics, it is advisable to disguise it.
• If there is a pipe or corners for gasket for ventilation, the corrugation is simply indispensable. It easily bypasses all obstacles without additional connecting elements.
• The corrugation is sold different diameters, you need to choose the hole on the hood on the hood.

• One end of the corrugations are attached to the exhaust and tighten the clamp. Fixation is obtained durable and additional insulation will not be required. It is attached to the ventilation using a lattice.

Tip: If there is a suspicion of deterioration of the drawing, you need to replace the corrugation. When operating in it there is a fat and harness that impede effective work.

How to attach the air duct to ventilation

• The ventilation is in each apartment, located in the kitchen and the bathroom and is a grill and opening behind it, which goes into the ventilation system of the mines at home.
• To attach a hood, a special flaps is bought in the store of household goods. It is the same size as the grill on ventilation.
• The grille is removed and the shield is fixed in its place, which is made of cast plastic with a round hole for the air duct pipe.

Unfortunately, direct connection, though simple, but has an important flaw. When designing old houses, the ventilation was not provided for using it for hoods in each apartment. Therefore, through the overall channel, the smell through the hood can be delayed in neighboring apartments. In addition, the pressure of the air flow will change in the mine, and only the most powerful hoods will be able to stretch the air into it.

• To avoid this, you can invite a ventilation specialist who, after inspection in place, will give recommendations for choosing the drawing model, its power. Perhaps and will hold the necessary cleaning of ventilation.
• You can also make ventilation yourself, connecting the air duct directly to the street through the window.
• Last option - Installing a recirculation exhaust, which does not require air duct.

Tip: B. modern houses Individual ventilation channels are provided and there will be no such problems.

Mounting kitchen drawing with their hands video

Where is it better to arrange a power outlet?

• Very often, the hoods have too short wire to reach the usual outlet. And most of the houses do not provide a special socket for it. Therefore, either you have to make the wiring and strobhide walls, or use the extension.
• If repairs are made in the kitchen, it is advisable to make a separate outlet for an exhaust.
• It should not be located in close proximity to the stove and washing. It is best to make it upstairs, to the right or left of the hood.
• To protect against droplets of voltage and brave motor, the outlet grounds.

Assembly and installation of drawing This is a fairly simple process with which you can cope on your own. But it is important to follow the instructions that are given to a specific model. And then the kitchen, and the whole apartment will be under reliable protection from Gary and strong smells.