Furniture fittings today are presented in a large assortment, which makes it possible to choose. Not so long ago, the facade of furniture was the same, and she herself had the kind of a swing box.Now the process of nomination has become simplified with the help of guides.

One of the elements of convenience in modern furniture is retractable fittings.

The role of the retractable systems is sufficiently important because they enable the maximum drawer extension. Thus, it is not difficult to pull its content.

They are used in any type of furniture, where there are retractable structures and modules.

The action of the guides for the boxes is due to the movement of the metal-produced generated from the metal with the help of balls or rollers.

Ball guides as well as roller consist of their two parts. One of them is attached to the box, the other on the side wall.

Depending on the type of movement, they are separated into two types: roller guides and ball guides.

Roller guides.

Ball guides.

Ball guides

Ball systems allow you to fully push the box and can withstand a lot of weight. Some structures are withstanding about 60 kilograms. Set ball guides in any plane.

The varieties of ball guides are many, they differ mainly in height, as well as by the degree of extension and the presence of the closer.

Compared with roller, ball guides have their advantages:

• IN possibility of regulating the system in 2 directions;
• B. eschmy drawer;
• D. duty of operation;
• ABOUT escalation of work with a strong load;
• IN possibility of complete extension.

Today, the furniture is more often equipped with roller and ball guides.

Despite all the positive parties, such guides are more expensive than roller. But if there is a need to install the guides in the structures where heavy items will be stored, then you should give preference to ball systems.

Ball guides have many different modifications, with various designs, sizes, fastening methods, extension degree.

Roller guides

The drawer extension in this type of guides is possible only incomplete, but also the cost of them several times lower than the balls. Roller guides create noise when opening a box, crash rollers should be used to eliminate such an effect.

Roller guides withstand dynamic loads up to 25 kg.

The load that roller guides withstand is 25 kg. By stopping your choice on roller guides, it is important to take into account their thickness: so that they serve for a long time, it should be from 1.2 mm.

Roller guides are partial extension guide.

Varieties of guides: metaboxes and tandempoxes

Based on the two previous types of guides, more advanced boxes produce.

These guide systems appeared relatively recently.

Selecting guides

To choose a guide system that will serve for a long time, first of all, you need to pay attention to the thickness of the metal. Especially if these are roller guides.

Roller guides are the simplest devices and installation guides.

This parameter depends on how much accessories will work. The ideal thickness is 1-1.2 mm. Deciding to buy a smaller option, the guarantee that the retractable boxes will serve a long period, no.

Covered roller guides with durable epoxy enamel.

The choice of fittings is also in the preliminary inspection of the product: it is important that the guides are smooth, without defects.

Be sure to check the rollers or balls, they must function efficiently.

Installation of roller guides for boxes

1. Installation is worth starting from the attachment of two guides to the bottom of the drawer. The roller at this time is located at the rear wall of the box, the second end of the plank must rest in the facade.
   

   

   Boxes to be installed guides.

   

   Fastening guide to the side surface of the drawer.

2. The plank for the bottom of the box is attached by self-stakes, it is not worth the sidewalls to the sidewalls, because the second video is moving along the side. You should pay attention to the hats of self-tapping screws. They must be lower than the surface of the plank, so as not to interfere with the drawer.
   

   

   Box with installed guides.

   

   Marking of guides on the walls of the facade.

3. Attach the second pair of the guides of the furniture, it is necessary to make preliminary pencil marks. When the place for the guide is noted, it is applied to the mark and fasten using the screws.

   

   This manipulation repeat for all three pairs of guides.

   

   Build a box with installed guides.

   

   We establish the boxes themselves inside the box and get the finished piece of furniture.

   Video: Build a drawer with a sliding tandembox mechanism.

   Retractable boxes with different mechanisms - 50 photo ideas:

   

   

The kitchen arrangement is not easy task. In this room, it is very important to comply with not only designer unity, convenience and beauty, but also ergonomics of space. Especially acute question rational use The space is felt in small areas in the area, in which everyone needs to fit the furniture and accessories necessary for the kitchen.

Considering that it is just necessary to work in the kitchen a large number of Utensils, dishes and technical devices, kitchens in small apartments often look closed. Until recently, the problem of lack of useful area in the kitchen area was solved with suspended shelves and compact furniture. However, today the hoses have an excellent opportunity to make even the most small room in the area comfortable and convenient, pose retractable systems for kitchen. Boxes, baskets and other retractable mechanisms will help equip the kitchen in the most ergonomic way, providing a pleasant work for cooking and no less pleasant meals. About such modern systems today and will tell the "Dream House" in this publication.

How to equip the kitchen with retractable systems

Modern retractable systems for the kitchen allow you to maximize each centimeter of the room, without clinging to the space. Systems are mounted in furniture in such a way that externally, their area does not increase, allowing to embody the most intricate design solutions.

Systems retractable boxes For the kitchen is the most common way to save space. As a rule, they are mounted inside the suspended or floor cabinets. When opening the door of the cabinet from its subsoil, one or more multi-level boxes, designed to store the most different kitchen devices. The advantage of drawers is that when opening, they are completely rolled out out, which allows you to maximize its rear area. In this case, the built-in fastening elements hold the open box in the desired position, without giving it falling.

Retractable kitchen boxes can have different sizes and different internal sections in which it is convenient to store one or another. Sometimes, when opening one door, all drawers are put forward, thanks to which the hostess can immediately see and take the thing they need.

It is necessary to equip the cabinets with drawers so that all the necessary devices are located near the work surface. For example, under the can be retractable sections for the kitchen, in which cutlery, cutting boards, etc. can be stored. Near the slab should be equipped with more volumetric sections in which it will be convenient to store, pan, bare, etc.

An interesting analog boxes are retractable bottles for the kitchen. Their difference from previous systems is only in size. As a rule, in width, the bottle design does not exceed 15-20 cm, which allows you to mount it in narrow places where normal cabinet Just not fit. Inside the bottles are several sections intended for storing narrow and high things.

Good assistants in the design of a small kitchen area are retractable baskets for kitchen. Most often wicker baskets that complement the kitchen with interesting designer accents are installed in retractable shelveswhich roll out out, sliding on the guides. Depending on the functional destination, the retractable baskets can be installed both in the upper and lower boxes. This element is indispensable for storing products that need ventilation, such as vegetables or bakery products.

Additional retractable kitchen systems

In addition to storage baskets, many devices facilitating the cooking process are extremely necessary in the kitchen. Let's look at several such systems that can safely be called the ideas of ergonomic kitchen design.

1. Retractable cutting boards

Extendable cutting board Mounted inside the countertops and, if necessary, expands it. This usual kitchen accessory In unusual interpretation, it is often equipped with an additional container, which is convenient to collect bread crumbs or chop vegetables for salad. If the sizes of the table top are allowed, several boards are mounted in it different materials, for example, from plastic and wood.

2. Retractable table

This is an indispensable addition for very, in which it is impossible to equip dining area. The retractable table can be mounted in the worktop or in the boxes under it, or climb up and install on the leg.

3. System "Carousel"

Most often, kitchen furniture has the form of a Latin letter L. Accordingly, it has roomy, but not particularly comfortable angular lockers. The inconvenience of these lockers is to get used and the impossibility of filling the entire surface if the cabinet is at the top. The "Carousel" system allows you to easily solve this problem. The design of the system is mounted either to the door or to the sidewall of the cabinet, and when the opening is completely extended outward. Universal sections allow you to store the most different dishes and utensils in such a system - from plates, glasses and cutlery to a saucepan and pan.

4. Retractable dumps for kitchen

Travel buckets are installed under the sink. Retractable garbage buckets for the kitchen, as well as drawers, can be attached to the reverse side of the door or installed on the shelf traveling along the rails. Some models of trash containers, when opening the door, the cover is automatically lifted.

5. Narrow vertical appliances storage boxes

A narrow vertical box is usually installed near washing or stove. There are no shelves and grids in such boxes, but they are great for storing all kitchen appliances. The retractable mechanism of these boxes is similar to the bottle, which we considered above.

Other retractable mechanisms, systems and sections for the kitchen

Depending on the layout of the kitchen, almost all of its retractable elements can be opened both directly and at an angle. Also, a retractable, retractable or even retractable wardrobe can be used to save a small room. All guide elements of such systems are manufactured in such a way that the doors and shelves open smoothly, without making a single sound.

Roller guides The most simple device and installation guides. Price average 50-100 rubles. For a couple. They look roller guides as in the photo below, you probably saw them, and more than once.

Covered roller guides with durable epoxy enamel are found on sale guides of different colors, the most common colors of the cream. You can find roller guides for drawers with a depth of 250 to 800 mm, that is, practically for all cases.

Roller guides withstand the dynamic load of up to 25 kg, you can hardly store something more severe in the dresser or in the box in the closet of the coupe. Cons of roller guides are noise with which they are extended and closed, partial extension. But the low price levels these shortcomings.

According to the installation scheme, the gap between the outer part of the side wall wall and the sidewall of the body of the product should be 12.5 mm or 25 mm to two sides, usually 26 mm are taken at calculations. This means that the dimensions of the drawer in the width must be less than the internal space of the couch by 25-26 mm.

Ball guides

Ball guides, or as they are called telescopic guides, are able to withstand a large load, have a smooth move. The cost of the guides is 300-400 rubles. For a couple. There are options with closers and without.

Ball guides as well as roller consist of their two parts. One of them is attached to the box, the other on the side wall.

In order to disconnect them, you must click on the retainer, as shown in the photo.

Of course, it is possible to install and not disconnecting, but this torment is something that happened to try on your experience. As a result, a negative idea of \u200b\u200bthe ball guides can be formed about the complexity of their installation. In fact, everything is simple.

Installation of ball guides The elements are made on the side walls of the cabinets and the sidewalls of the drawer.

The most commonly used ball guides with a height of 45 mm, the dimensional row of the guides from 250 to 700 mm, withstand the load up to 36 kg, which is more than.

Calculation of the box on ball guides It is similar to the calculation of roller guides, the dimensions of the drawer are defined as the size of the internal space minus 26 mm (12.7 mm + 12.7 mm).

Metaboxes

Metaboxes - The system of extension on the basis of roller guides. Material Metabox - steel with a thickness of 1.2 mm, covered with high-strength enamel. Price 300-400 rub. For a couple, the production of "BLUM" in the area of \u200b\u200b600-700 rubles.

Tandem

The technology of hidden guides tandem provides a smooth move even severely loaded boxes. The box is easily removed from the guides without tools.

Tandem - This is a smooth and complete or partial extension. Boxes can be like a built-in closer, and without. Tandem can be equipped with TIP-ON (opening system by pressing the facade). Cost of guides 1000 -1500 rub. For a couple.

On the guides for boxes Tandem can make a box under the sink. Since the washing has a convex part, which is inside the case, then standard, that is, the direct design of the box is not suitable here. Convex part or bottom of the sink will not allow the box to close. In this case, the bottom of the cut-out drawer is made, the walls of the DSP drawer are attached to the cut. The whole design is installed on the tandem guides.

Application guides tandem. It involves the use of a 16 mm thick chipboard, although it is possible to solutions using a 18 mm thick chipboard.

The most expensive segment of the market of guides for boxes. The board of the drawer (Tsargi) is made of thin-walled steel, unlike tandems, where the case of the box is made of chipboard.

The kit includes fastenings to the facade and fastening the rear wall of the drawer. Detailing includes the bottom and rear wall of the chipboard, like a metabox. Guides are similar to tandemams, have smooth closing, with closers.

Tandempoxes can be equipped with a system of opening that does not require the installation of the handle to the facade, it is easy to press the hand to the facade.

Tandempoxes of various heights and varieties of the range significantly exceeds metaboxes. Consider on the example tandempoxes Blum..

Height N, the height of the tsargi drawer 68 mm, the lowest box

Height M, height king box 83 mm

Height C, Height Tsargi Box 115 mm

Used for high facades, the rear wall is increased, also added realing. Minimum height Internal space for a drawer 191 mm.

Height Also D, Tsargi Height Box 83 mm

Used for high facades, the rear wall is also increased, but instead of two clubs, releasing the Boxside - a lining on the king of the drawer. The minimum height of the internal space for the drawer is 224 mm. The solution is mainly for kitchen jackets, not for cabinets coupe.

Two triple tubular holders and ringer tubes allow you to make a special box on tandembox guides to a sink. Thanks to the cut in the bottom of the box, it allows you to get around the sink discovering inside the body.

Another interesting solution From Blum This is the use of tandembox guides for an angular tube, which is called Space Corner..

A set of accessories includes a number of specific elements that are not in other guides and fittings, frankly, not cheap. Space Corner allows you to effectively use the angular space in the kitchen, and the use of ORGA LINE separators additionally structures storage space.

at first lEGRABOX boxes Positioned as elite products that was not available to a simple mortal furniture maker. The case was not at all in price, and the price, by the way, the highest in comparison with other systems of extension, and in the complexity and accuracy of the manufacture of other parts from the chipboard, the accuracy of milling the bottom of the box, the accuracy of drilling the side walls of the housing and facades. Therefore, LEGRABOX boxes were offered to furniture enterprises that produce high-class furniture.

Installation, calculation and installation of guides for boxes

A little to know which guides for boxes, but the question arises, how to calculate and install guides.

On the Internet there are a large number of ways and approaches in the calculation and installation of the guides. I use a simple, with a clear interface program from Blum called Dynalog, for the design, use the Dynaplan module.

The program allows calculate and roller guides, and metaboxes, tandempoxes and tandems. At the exit, we will receive a list of parts with dimensions, necessary accessories, drawings drilling side walls and facades. Special furniture programs are expensive, there is no point in mastering them and especially buy, if you want to make products for home yourself.

As an example of the base product, I will bring a tumb of 616 mm high, a width of 600 mm, with a depth of 500 mm with overhead facades with a height of 200 mm, drawers from a chipboard height of 150 mm, gaps between 4 mm facades.

If we want to calculate installation of boxes in the wardrobe, then note that with the depth of a 600 mm cabinet and an internal partition of 500 mm, we carry out the calculation for deposit facades, the facades will be inside between the side wall and the partition, as well as between the horizontal walls. Side gaps are better to do 4 mm in the embodimed facade variant.

Tenderbox SLIMSide box

Tenderbox SLIMSIDE box is an extension system with thin elegant lateral walls, a thickness of only 13 mm. Smooth sidewalls do not take a millimeter from the useful inner space of the drawer, which ensures flawless functionality. The range presents 3 heights of the side walls: 80, 120 and 170 mm. Due to the high walls, there is no need to use additional extensions and rails to make deep boxes.

Tenderbox SLIMSIDE box offers 3D adjustment of the facade up and down, left and right, back and forth to achieve his perfect position.

Due to the full extension of the boxes provide good review and open the maximum access to the contents for optimal storage organization. Synchronized guides - accurate, controlled and absolutely smooth motion of the box.

SLIMSIDE Created for discerning consumers for which design and specifications. For those who draw attention to the details, appreciates comfort and perfection even in trifles. This is the choice of real professionals in the furniture industry.

Each box is packaged individually, which simplifies the assembly of the box and the order process. The kit includes: guides hidden with 3D adjustment (left and right), side walls with built-in facade adjustment system (left and right), plugs with SlimBox logo (2 pieces), fastening to the facade (2 pieces), CLIP-ON guide lock (2 pieces), adapter of the rear wall of the box (2 pieces).

Tenderbox slimside is:

· Full extension and smooth closing

· Stylish appearanceEasy installation

· Hidden synchronized guides

· 3D box adjustment: in height, depth, left and right

· Independent railing

· Material: Steel, with epoxy coating, Anthracite color

Tenderbox drawers system refers to one of the most popular types in the type market - the so-called "double-wall boxes" or boxes with steel sidewalls. Thanks to the sidewall material, this box is resistant to moisture and therefore widely used in the segment kitchen furniture and furniture for bathrooms.

Tenderbox boxes use modern guides of hidden installation with closers, which provide a silent course and smooth closing effortlessly with a permissible load up to 30 kg. Thanks to the full drawer, the boxes provide a good overview and open the maximum access to the content for the optimal storage organization.

In the assortment of components Tenderbox, various materials and height of the decide to increase the height of the drawer are available:

Classic fence for medium and high drawer - Reheling;

Practical steel extensions on the sidewall of the box;

Elegant tempered glass extensions;

Steel replenishments with perforation.

Combining drawers of different heights with extensions, you can achieve optimal distribution Available space for efficient storage:

Low boxes can be used for shallow trays under the appliances and kitchen tools;

Middle height boxes with railing or steel apparent - under low dishes and frying pan;

Deep drawers with additional high sidewalls - under pan and large-sized objects.

Tenderbox drawers system and accessories to them will help make your furniture functional and ergonomic. Assortment of sizes of boxes, as well as available color solutions Presented in the table below:

C. covered guides for wooden boxes of full extension with an adjustment and shock absorber, 3D adjustment.

Benefits:

3D facade adjustment provides not only tested adjustment in height and slope, but also adjusting width and depth. Exactly and convenient, without the use of tools.

The hidden installation of the guides will bring aesthetics and elegance into your furniture, because all the design elements are hidden from the eye of the user. Hidden installation is technologies for high-level furniture, unmatched outside and inside;

The possibility of full extension provides unlimited access to the contents of the drawer, due to which all items are equally visible and easily retrieved;

The built-in depreciation system provides a lung and silent slip;

The average optimal dynamic load on the box is 30 kg;

The conclusion mechanism is designed for 60,000 opening / closing cycles, which is at least 10 years of operation.