Palm from plastic bottles Creates an unusual harmony in the garden or on the plot. It seems that you rest on the seashore, but around the palm and sand)))). Today dear friends we will consider two interesting master Class for the manufacture of beautiful palm from plastic bottles with your own hands, the author of the data master classes is Olga Akimova and Safater Eshilev. It's not a secret to anyone that a plastic bottle has conquered many of us, because it is a clean material that is very easy and simple to use. Besides, that a lot is important, it is cheap Materialwhat for many has great importance. Crafts from bottles will serve for a very long time, because we all know that the bottle is decomposed very long. So making crafts from them, we purify an environment And creating something interesting and beautiful for yourself. If you suddenly have accumulated a lot of plastic bottles, then it has come to use the time to use them for their intended purpose, which means that you can make a beautiful palm tree.
Probably many of us want in their site a little longer than summer, this is just a palm tree from bottles and will decorate on the plot and we will prolong our imagination at least a little summer period. Palmry says Olga very easily, even the newcomer will cope with this task.

* Scissors.
* Metal rod.
* Drill.

Method for making palm from bottles:
Before the manufacture, it would be good to understand first of the size we will make palm trees and where we install it with you. If you have children, then make such a palm tree on the playground. Believe the children very much like such crafts and they gladly play near them.
We take plastic bottles and look so that they are all clean, if there are dirty, then you need to wash them. We definitely remove all the labels from the bottles and then you can start making.

Take brown bottles and cut off the bottom of them for the height you need.

Now we need to make the branches of our palm tree, for this we take a green plastic bottle and cut it along almost all over the entire length and then we cut it around the edge (as if we do strokes-car).

We take the drill and begin with it to do in every workpiece from the brown bottle of the hole. The holes should be like a diameter of a metal rod.

We did all the blanks, go to the assembly of palm trees, we will make the trunk. We take the brown bottles and the teeth of them will be flexing with outwards, and then begin to wear a metal rod. In turn, insert a bottle into the bottle, look like on the photo.

From above when the trunk is ready to dress the leaves that made from a green bottle. The leaves on the tree are fixing: when the mode is the last bottle on the leaves, we leave the neck with a cork. In traffic jam, we make a hole in the size of the metal rod and fit tightly, it does not need any other fasteners.
That's all, palm from plastic bottles is ready. Look at what kind of beauty turned out from Olga and most importantly such crafts will serve you for a very long time and it's not afraid of rain nor frost.

Palm of plastic bottles with coconuts

Palm trees are needed, palm trees are important. Sasha turned out a little different but also very interesting and beautiful palm trees also with coconuts. Let's look at the process of making it, because someone will like this palm tree and someone else, all the tastes are different.

For the manufacture of palm trees, we will need:
* Plastic bottles of green color.
* Plastic bottles brown color.
* Scissors.
* Metal rod.
* Drill.

Method of making palm trees with coconuts:
We first take the trunk, take brown beer bottles of 20 pieces. So many bottles required Sasha for the manufacture of one palm of 1 m. Height.

Sut off at the bottom of the bottom closer to the base. Cut the bottle then five parts.

Now we will make the bottom foliage of the green bottle. Cut off the bottom and cut it into 5 parts, you will need three billets.

Cut onto it the foliage as shown in the photo.

Fighting the foliage as shown in the photo.

That's how you should work.

We take 2 liters. Plastic bottle of green color.

Also cut off the bottom.

We cut almost along the entire length of thin strips. Tips need to sharpen.

This is such a blank for the manufacture of palm trees.

We begin to collect the bottom foliage on the iron rod. First we insert the blanks that are cut into stripes.

Then we insert the blanks on which they cut out the foliage.

We continue, cut out of 2 lithon bottle Makhrushki

These are such a workpiece.

Of the 1.5 liter bottle, too, the Machruca regime.

For the manufacture of palm branches, it will take billets from 1.5 liter and 2 liter bottles.

If you do not have a lot of green bottles, then transparent bottles can be painted with green paint.

All bottles cut stripes.

At all bottles, we put the lids and drill on 8 mm.

Corners from bottles can be inserted between bottles, it is in order to save bottles.

0.5 l. Bottles cut in size and insert the branches on the ends.

Here are our billets before assembly, you can proceed to work.

We first collect 1.5 liter, and at the ends of the branches 2 liter bottles.

It remains to make coconuts, because we have a palm tree with coconuts. For this Sasha used the old balls, I ordered them with a thin wire that it was for something to be attached.

Kych them in brown. When they get dry hang them on the palm tree.

Instead of the trunk, we use an old unnecessary pipe for 15 and 2.5 meters high. Two holes in it are 8 mm in it. Branches - wire roll 7 mm. 2 meters 1 meter per face.

All palm trees with coconuts is ready.

Copyright © Attention!. Copying text and photos can only be used with the permission of the site administration and indicating the active link to the site. 2019 All rights reserved.

The desire of a person to decorate its home is not limited to an apartment or at home. Going out to the street, it is embodied in flower beds and barisades, in garden bushes and trees. But seasonal changes in nature constantly make adjustments to the beauty we created.

But, how to create such a picture from the subwoofers capable of please the eyes for many years? We will tell in this article.

Material for artificial palm

Raw materials for the manufacture of man-made palm trees will be plastic bottles. This is one of the most common containers on the planet for various drinks.

To create a palm you will need a large number of Simplicate plastic bottles of two colors:

• brown: from under the kvass or beer - for the tree trunk,
• green: from under sprite, Tarkhun or the same beer - for her leaves.

They can be several forms, in this case they will have to alternate them when assembling, but it is better to have the same, coinciding and in color and in form.

The workpiece of the material and will be the most difficult work in the process of "growing" palm trees from plastic bottles with their own hands. But if you have children, and they have friends, then all work can turn into an exciting cultural and educational event with a small palm grove in the end.

Or not end with one palm trees.

Before using the bottle, it should be washed so that the remnants of the drinks in them do not become adhesive Base For dust, and remove labels and remnants of glue, which they were glued.

Assembling palm trees from plastic bottles - step by step for beginners

Production options plastic palm tree - A lot, consider the most common.

1. Barrel.

The basis for it can serve:

• metal rod or fittings;
• wooden pillar;
• dried tree.

Consider the options for the manufacture of palm trunk. For the manufacture of the trunks of these palm trees, various technologies were applied.

IN first case The bottles simply cut off the top, and they rode on the rod, inserting each other. This only remotely resembles the trunk of palm trees, but it simply does not require such a large number of bottles like other ways.

Second option It resembles the first, but in it the tops of the bottles are cut off with a crown, the cloves of which are slightly turned outward.

The third - requires a sufficiently large number of bottles, but thus you can decorate very thick grounds, imitating real species Palms with thick trunks, or to turn the trunks of dried trees, freed from the extra branches.

Sometimes, not to look for such a huge number of brown bottle of the same type, collect the same white, and after screwing their bottoms with self-draws to the wooden base of the trunk, painted with it in one brown color.

Can do it resistant to burnout acrylic paints Or car enamels, although some use cheaper nitroquras from aerosol cans. Sometimes a tassel, after drying the first layer, the recesses are painted in more dark colorIt turns out more realistic. Better after painting everything is covered with colorless frost-resistant varnish.

On the formation of the stem fourth way It also takes quite a large number of bottles, but such an imitation looks even more believable and beautiful. Get such scales using the curvature of the legs of the bottles.

In contrast to the previous options formed from the bottom, the set of such a "bark" is carried out from the rapel part of the "trunk" when the fasteners of the upper layers (self-tapping screws, nails, brackets) are covered with the bottom, and the lowest bottoms in the ground or pumped it.

On the same method similar and fifth option, Only it imitates the type of palm trees, the bark of the leaves, who leaving the thick pieces of the cuttings behind the growth of the trees. You will not describe how it is to form its formation, it is clear from the photo.

And we will illustrate step-by-step photos the simplest of the textured methods, only unlike the photos on which it is shown, and where only the lower halves of bottles are used, we will use all the material. We took a white bottle in order to be a noticeable markup.

To enlarge the pictures, click on it.

The upper part of the bottle, after cutting and bending the tips, turns around and is inserted into the bottom. Both are placed on a metal rod forming the barrel and bending to your taste. For this, the holes of the desired diameter are drilled in the ramps of the bottles, as in the photo.

It is not so large: for the 3-meter trunk you will need 19 - 20 double-liter bottles.

For massiveness and resistance to fmining plastic, in the future, during the internal sets of bottles, you can float sand.

2. Leaves.

Some of them only in a very large distance resemble palm trees, but they are easy to manufacture.

More difficult when you need to work with scissors.

To enlarge the pictures - click on it.

Over the edges of the leaves, you can slightly put out open fire, as in the last photo of this selection, and they will acquire a more natural look, because in nature the leaves with rectangular ends does not happen.

Reliable fastening will be, if to welcome the puck with the tubes, in which the metal rods of the palm branches are inserted into the metallic rods. To the wooden trunk, such a washer can be fastened or simply departing it and insert trimming of metal tubes.

You can collect branches using the bottles themselves.

And you can, cutting off the neck with carvings, use the stapler. Or, inserting the bottle leaves one to one, fasten on the rod only the last.

Video shown step-by-step manufacture Palms made of plastic bottles:

Minipalm from plastic bottles, video

If you are not ready for the global embodiment of the idea of \u200b\u200bplanting palm trees from plastic bottles, such as on the first photo, then you may like a minimalistic idea.

To enlarge the pictures - click on it.

The method of making leaves of one of these domestic palmocks we described, and the video structure for the manufacture of such a composition can help you in its manufacture:

It is also interesting in one of the ways of manufacturing a trunk, which can also be applied in the production of larger palm trees in the courtyard, and another way heat treatment Plastic mentioned by us earlier.

Artificial coconuts, bananas and other palm trees fruits can be made of polystyrene foam, pasted with paper and painted. If you paint them into several layers with acrylic paints for outdoor work, they will be able to live for quite a long time and on the street.

And finally, another video:

Dear readers, if you have any questions, ask them using the form below. We will be happy to communicate with you;)

Crafts for giving in my work occupy an important place. Using the cast material, I was able to turn the courtyard of a multi-storey house to the fabulous kingdom. And white birch of plastic bottles in this kingdom in the first place. This birch is done very simple.
- So, to make such a tree from plastic bottles, we will need:
- Bottles of green and brown for leaves,
- plastic tube and fittings for the trunk,
- electrical cable for branches
- Thin wire.

Photo 1. Making branches: Cut the pieces of an electric cable - for the upper branches in short.

Photo 2-4. We do the trunk: plastic pipe We make holes and consistently insert the segments of the cable in them. Insert fittings into the pipe.

Photo 5 Wood frame in the process. Using this technology, you can make various trees from plastic bottles.

Photo 6-7. Consistently increasing the height of birch.

Photo 8. So we do the top

Photo 9. Top krepim to tree trunk

Photo 10-11. Increase and branch branches.

Photo 11. And now make leaves. To do this, we use plastic bottles of brown and green.

Photo 12. To have less waste, we make the stencil sheet and apply it to the middle part of the bottle.

Photo 13-15. Shell make holes and secure wire to the sheet.

Photo 16. Please note that birch leaves have different sizes and shades. Finished leaves screw to branches, the trunk is painted with paint protein, black red touches, green paint paint branches and birch ready!

Palm from plastic bottles do it yourself how to make

This article sent us a girl from Moscow, Anna Samochanov, « How to make palm from plastic bottles with your own hands».

My youngest Son, he seven years old, loves to make it very much. It doesn't matter what it works - a designer, plasticine or cardboard - any handicraft in his hands turns into something important and useful. He especially likes, when Dad or Mom participates in this process. We, of course, do not always have enough time to such things, but if we are worked out for business, we work together and brought to the end to the end. The most serious of our joint work was palm from plastic bottles with their own hands.

Before closing kindergarten For repairs, all parents were commissioned to make any crafts. The teacher said me: " Your task for vacation - palm from plastic bottles with your own hands" Scratching the backbone, we began to work. Passed brown and green colors, found a couple of long iron rods, prepared drill.

Started from the trunk: from each bottle, the bottoms were cut into a height of about 20 cm. The edges were cut into teeth for texture and rented a little to be like a palm tree scales. In each workpiece, I drilled a hole in the diameter of the long iron rod, which was supposed to serve as the basis for the trunk.

Green bottles We cut in half and edges each cut in the form of leaves. On one of the halves left the necks, at the ends of others, I also drilled suitable by the diameter of the hole.

Having done all the blanks, started assembling!

How to mount palm leaves?
We take elastic rods, not fat, but hard. When we make our leaves for plastic palm trees, we cut the bottles and insert them alone in one, neck in the neck, but we leave a plug on the last bottle. We drill the cork and do the rod, at the end of the rods bend that the leaves would not sleep, that's all.




That's all dear readers, Thank you for visiting and reading my site, I advise you to learn how to make flowers from plastic bottles, and in general, various crafts from plastic bottles look beautiful and naturally. Successes to your crafts !!!

Palm from plastic bottles. Author Oksana Abramova.

I will gladly show you. This is a very fast and exciting process, just collect, cut and cut the bottle!

Master class "Palma of plastic bottles"

Photo 1. For the trunk, we need brown bottles of different sizes from 0.5 liters to 2 liters or 2.5l.
Cut from the neck of the bottle of a little less than half. But the bottom of the bottle, I did not throw away, and in parallel collected the second barrel (above the photo - right). It is cut by analogy with this. But for the assembly, in the bottom, it will be necessary to cut holes with a hot knife (heating the knife to gas stove And I cut the hole of the desired diameter - the size depends on the rod to which you will wear them).

Photo 2. Cut on 8 parts before the place where the narrowing to the neck begins. And give these parts the shape of triangles

Photo 9. We start cutting our sheets from the middle of the top on both sides (about 0.4-0.5 mm), while on the middle of the sheet (between the cuts), we leave at least 1.5 cm.

Photo 10. Intripping each strip in such a sequence: 1-down, 2- skip, 3-up, 4-skip and so on. That is why our foliage will look more magnificent.

Photo 11. For the rod, I used the metal-plastic pipe (with a diameter of 20 mm), the height you can adjust yourself.
We start collecting the trunk, using first details from larger bottles and gradually (to the top of the palm) go to smaller. We collect their neck down, insert each other (a glass in a glass), with each next part, the petals turn into a checker order (in the intervals between the previous one).
The first part, I fucked to a metal-plastic pipe with a narrow double tape (sticks tightly, tried to tear this year and could not), but if you do not trust, then add some glue.
Without reaching about 30 cm. To the top of the stem, our barrel ends and foliage begins. Place the finished sheets in the chess order (each next leaflet in the gap between the previous one), alternating different colors of bottles.
For a beautiful closing of the top of the palm trees (so that it was finished), I cut 1.5 liters in half. Brown bottle, as well as for the trunk. Then she cut it down on top of thin strips (as leafs cut), and collected hands together, as if wrapped. Blucked the neck of the bottle, with the help of the same tape, to the top edge of the pipe.
For fastening, I used the reinforcement (diameter 12 mm.) 70 cm high (30 cm in the ground, 40 cm. In the trunk). And on her, like on SHAPUR, put on a metal-plastic pipe, that is, the very finished palm tree.

Photo 12. Ready!

Summer spending on panstonesThe autumn faces the problem of recycling plastic containers from under all sorts of soft drinks. Palm tree from plastic bottles can be an unexpected way to convert garbage to garden decoration.

How is this possible? It is very simple, if you carefully study the instructions telling about the manufacture of palm trees from bottles, prepare everything required tools, consumables, and be sure to stock up a good mood.

Bottles palm: Possible benefits and use methods

As is known, the plastic used for the production of food packaging in the soil does not decompose hundreds of years. The centralized removal of this kind of garbage is not unwinded everywhere, but I do not want to clog the nearby territories by plastic waste. What to do a gift book in such a situation? Do not have to carry plastic bottles in the city?

Do not hurry! If you carefully collect bottles of brown and green plastic, in the off-season with the whole family in the evening you can turn this container into an unusual evergreen tree.

Palm from bottles will perfectly decorate:

• dooming territory;
• an unsightly corner of the garden;
• plot next to economic buildings;
• playground;
• earth cut near the outdoor pool.

Palm tree from plastic bottles according to the instructions below can be a spectacular decoration on any party, wedding, thematic evening or children's holiday.

The manufacture of the original subject of the decor will not cause difficulties even in people far from this kind of creativity. The main thing before, before plastic bottles make palm trees, prepare everything you need.

What will be required for palm from plastic bottles?

What should be stocking before starting work? Primarily, homemade Master You will need plastic bottles of green and brown. Green are billets for tree foliage, and brown is the future trunks of evergreen beauties. At the same time, the height of the plant and the puff of the crown directly depend on the number of assembled containers.

Scroll essential materials and tools for creating palm from bottles includes:

• plastic container;
• acute stationery knife and scissors;
• durable tape;
• metal bar or plastic tube for the trunk;
• thick rope or wire in braid for the base of the leaves.

When selecting plastic bottles for palm trees, it is necessary to take into account that the trunks and leaves made from the container of the same diameter look like better. If there were green bottles of smaller size in the reserve, they can be used for leaves in the middle of the crown, and here brown small vessels will have to be used for trees of trees of another species or size. Different shades of plastic are not a hindrance. They will only give the man-made plant of animals and brightness.

Bottles Palm: Manufacturing Instructions

A step-by-step description of all the subtleties of creating a plastic tree will help quickly, literally for the evening to assemble with their own hands, stood palm from plastic bottles of conceived height.

The process consists of three operations:

• assembly of leaves;
• creating a plate of plastic plant;
• connections of all parts and editing of the finished tree.

Before plastic bottles make palm trees, the container is necessarily wash and remove all paper and film labels from it.

Although there are a lot of options for creating a plastic tree, the most magnificent long leaves at any selected method are obtained from large, for example, two-liter bottles.

Creating a palm tree from bottles

In prepared green bottles, a stationery knife or scissors cut a bottom part. It is no longer needed, and the upper half will become a blank for the sheet.

It in direction to the neck is neatly cut into thin longitudinal stripes. The larger the diameter of the plastic bottle, the ground and the greasher will turn out the green leaves of palm trees.

These are not the only option to create leaves. If the upper part of the plastic bottle is cut, as in the photo, on four "petals", and then each of them will throw out several times, it turns out beautiful permanent foliage.

The resulting fragments of the leaves are consistently riveted on a strong rope or durable electric cable. On the first workpiece, it is necessary to screw the cover to consolidate the "petiole" of the sheet on the top of the knot. Similarly, the last part of the bottle is twisted.

At palm trees from plastic bottles can be the top of any volume, but the trees are better looking, the crown of which consists no less than 5-7 leaves.

At the base of the finished leaves, palm trees should be a long stalk, to then collect and securely secure the entire design.

Bottles Palm Tank Build

To obtain a similar natural tree trunk, almost the whole bottle will be required, except the bottom of the bottom.

From the bottom almost to the sorry on brown bottles make longitudinal cuts that divide the container on equal petals.

Only a small fragment of the Donets goes to waste

Palm tree, created by your own hands, does not require care, but at the same time is an excellent interior decoration. The master class offers you the opportunity to create two palm options - for the desktop and for the territory near the house.

If you wish to decorate your interior with exotic elements, you can try to make palm trees with your own hands using one of the techniques presented in this master class.

To create the most simple palm option, you will need the following materials:

Wire, thickness and diameter of which will depend solely on your desire for the future of the tree;

Pliers;

Paper sheets with adhesive side;

Any material for turning in palm trees is used here a simple brush for a smoking tube;

Make out of the wire several segments of the desired length, the number of them should be about 8-10. Wire length is the height of your palm, so try to make it optimal for your desire. Blinding paper box Attach to one of the ends of the wire, which will be sheets of palm trees. For each wire, the future leaves are put on.

With the help of scissors, give the squares the desired shape of the petals, in each of which make cuts that reach the wire.

Leaves for palm trees should be connected to each other to get a tree. Now you should take a strip of the rash of any color to impart realism, the most suitable will be brown brown. Take all wires in your hand with leaves and connect them with the winding from the ram. Having achieved the desired palm height, you can cut off an excess from the rash. Leave at the same time one or two centimeters, it will then give a palm stability.

Install the palm tree, giving the desired shape to leaves.

Make palm with your own hands with a large size for placing it in the courtyard of the house can be from simple plastic bottles.

To do this, it is necessary to choose plastic bottles of green and brown, take a couple of iron spots and prepare a drill, as well as a knife and scissors.

To begin with, the trunk should be made. From each bottle, cut off the bottom with a height of at least 20 cm. The edges should be cut into a tooth and beaten for clarity. This will make it possible to obtain the scaly structure of the trunk of palm trees. Also in each bottle billet should be drilled a hole equal to the diameter of the iron rod, it will be the basis.

Now we take green bottles and cut them in half. Further the edges of each bottle are cut in the form of leaves. On one half, we leave the neck, and at the ends of others, drill holes for twigs.

Billets are ready, it's time to start assembling a palm tree!

Font palm leaves are not as hard as it may seem. It is necessary to take elastic rods, rather hard, but not fat. Cutting green bottles insert one into one, throat in the throat, and on the last bottle we leave the cork that we drill and wear a rod, at the end of the rod need to be bandaged that the leaves do not sleep.

Palma from plastic bottles is ready!

An easier option is also possible.