Designing systems of autopolivation and irrigation. Device of irrigation systems. Equipment for automatic drip irrigation system
- Features of the system system drip watering
- Design system automatic watering
- Equipment for automatic drip irrigation system
- Automatic irrigation system: Important nuances
- Assembly and connection of the system of autopolivation: Step-by-step instructions
Watering is an event that is necessary for the existence and development of almost anyone cultural plant. However, not every gardener has a desire or time in a dry season to spend its time with a hose in hand or follow the work of sprinklers. For independent irrigation, it will be necessary to come to the garden in the morning and in the evening, to the garden or to a greenhouse. This requires a lot of time, especially if the site is not near the main place of residence. And if the plants are carefully hidden from unfavorable external influences in the greenhouse, then they will need to watered them much more often, because, firstly, it is impossible to rest even in the rain, secondly, in the greenhouses moisture from the ground evaporates faster than in the open sky. That is why many experienced gardens and gardeners are installed in their greenhouses of drip irrigation systems. This term is indicated by several different, combined general Principle Actions: They do not need direct human participation. These systems include: depth watering, micro drip irrigationWatering with sprinklers whose work is managed by automatic.
Of particular importance is the irrigation system in the meadows. To have a beautiful and green lawn, you need a lot of things. Such is the usual watering, which in everyday daily life turns out to be a very complex and almost impossible task. The automatic irrigation system is universal, and we would have told a brilliant solution to any of the problems described above. It can also be controlled by a computer or telephone. The system also has rain sensors that can accurate humidity.
With their help, the system delivers the desired amount of water at the right time, without overestimation or limit. Yes, of course, investments are needed. But ultimately this investment in your own business or personal garden or backyard. Regardless of the goals, this is your solution that is fully justified by all the advantages of our automatic irrigation systems.
Features of the device drip irrigation system
All automatic irrigation systems are a conductive element - a pipe or hose, a flow and pressure of the fluid in which is adjusted using automation.
As a rule, there are programmers, timers, filters and a variety of cranes valve control units or pumps - that is, instruments that run and control the process of automatic drip irrigation. Very comfortable sensors that are able to independently determine the level of humidity in the greenhouse and, if necessary, turn on the water supply. The most expensive and most effective is the deep watering. With this mode, water does not wash the earth from under the roots of plants, does not make fruit and leaves. The deep irrigation system in the greenhouse submits the necessary moisture directly to the roots of plants.
But in the end, the service is not enough and requires little effort. He is in full of pleasure looks at the beautiful and green Garden. A sufficient incentive, given the natural and natural emotions that provide us with plants around us. Do you want to be a fresh and beautiful lawn in your garden, which everyone could admire and even envy? Forget about infinite and strained manual watering. Automatic irrigation systems will solve your usual irrigation, never forget, work without stopping and save your time and money.
Honored attention of gardeners use drip irrigation systems. Such systems allow you to organize a round-the-clock watering in the greenhouse. Water comes in exactly in such quantities, which is necessary to ensure the normal development of plants. If you decide to acquire a modern drip irrigation system for your greenhouse, be sure to consult a qualified specialist, because The market presents a huge range of watering plants, the cost and equipment of options may differ very significantly. The specialist will help you choose this option that will fit into the affordable budget and will be the most the best way Calculate the solution of important problems with watering, taking into account available data, such as: Greenhouse area, drip watering time, power supply, water source. For the device of drip irrigation in the greenhouse, you need the following:
Mr. Novak from Brno has been using a garden for lawns for several years. Enough penetrated and consumed a lot of water. In long banks to walk with water until they left him the ear and the filled cart shot straight to his leg. Even before, Mr. Smith decided to automate watering, he asked us to give a quantitative assessment, how much time saved him and water stress - calculated as the amount per year. Automatic irrigation not only for rich with a huge garden. He pays for all - the investment will be returned soon.
Why do you need your irrigation system?
Lawn, flowers, trees and vegetables require from 2 to 6 liters of water per day per 1 m 2 Garden. The precipitate will not contain this amount. Watering systems for you are non-stop assistance for adequate irrigation throughout the garden, process complex forms and all types of terrain and vegetation to additionally prevent flooding. Irrigation system \u003d Beautiful lawn without work.
- The kit itself.
- Water tank.
- Gaskets.
- Nut.
- Awl.
- Filter.
- Flexible hoses.
- Traffic jams.
- Vinyl or copper hoses.
Back to the category
Design of automatic irrigation system
Automatic operating irrigation system supplied and assembled throughout the Czech Republic relieves you from all irrigation problems. We will take care of the design, implementation, installation of electrical and water supply, garden modifications, maintenance and wintering. We will verify the completed system, correct it, teach it in the operator and give it to carefree use.
When irrigation is usually carried out
Saves time and work - watering for you without stopping, even when on vacation, reacts to the weather - the sensors prevent water loss, fever and frost does not affect appearance - advanced sprinklers are automatically hidden, represents - the lawn and the garden looks beautiful and vividly, saves water - evenly regulates the distribution of water, uninterrupted operation and long service life is easily controlled. We carry irrigation from spring to the beginning of winter, indoors and winter. The perfect condition is after landscaping and sowing lawn, but the finished lawn is not an obstacle.
Systems of autopolis are very effective, but expensive enough. In order not to waste my money, it is necessary to thoroughly think out and plan and plan, and after that it is decided whether this idea has the meaning.
Planning the automatic irrigation system begins with the most important thing - the choice of water source. Is there a suitable source on your country? If there is any, you need to determine how much water it will be able to provide. For example, it will be 4 m³ / h for a plot of 6 acres. If you have a central water supply on your site or you plan to take water from a pond or river, then problems will most likely not be. And if the well or well, then you need to know its volume. If the source volume is less than the desired amount or it will be equal to the desired value, then after 1 hour you risk remain without water.
You are planning a garden or new landing? where it will be necessary to prepare irrigation passages. In winter irrigation, we disconnect and drain water. In the spring, adjust the system and return it to operation. We provide warranty and post-warranty service.
The cost of implementing individual irrigation
For an accurate budget, we need to measure the schedule and calculate the price on which several factors affect. You do not need to worry about any hidden surcharges. We will develop a customized solution for watering and give you a complete quote with a breakdown of material. If you approve it, we conclude a contract with a fixed price and a consistent delivery date.
In addition, water from the well or well must be checked for salts. If the salt content is higher than the norm, then with time your flowering garden or beds in the greenhouse turns into a saline desert.
It is necessary to correctly calculate the area for watering. To do this, take the paper, pencil and roulette. It is more convenient to use millimeter paper. Scale can be taken 1: 1 (1 m in 1 cm on the leaflet). From the total area of \u200b\u200bthe greenhouse, remove the area of \u200b\u200ball inorval places. Next, with the help of a roulette (you can simply steps, accuracy up to a millimeter is not important here) Measure the area of \u200b\u200bthe plots for which the automatic watering is needed. Display these sections on the plan. Specify their area. All this data will be needed to calculate the desired number of rods and their parameters.
Saving time and money using a turnkey irrigation system!
When ordering irrigation for the key you will receive free. Initial consultation and evaluation of land, optimal and economical irrigation design, 2-year-old wintering. Are you interested in an automatic system for the optimal irrigation of your greenery? Send us an optional request using the form below - you will receive a free pre-consultation, and then the ready-made "turnkey" offer. Please provide a phone or email address so that we can contact you in the near future, answer questions and organize a personal meeting.
Take a look at your sites and on their area. It is necessary to determine which site will just be enough spinner. So, for example, if you have a plot of 20 m², then it will be enough to install 1 point and choose an irrigation with a coating area of \u200b\u200babout 22 m². Setting two or more points on one area of \u200b\u200birrigation will be more expensive. It will be easier to provide an acceptable pressure level in pipes. However, if various structures do not fall into the area of \u200b\u200birrigation, which do not need to water, you will have to design a system with several irrigators of a smaller area of \u200b\u200baction so as not to spend in vain water.
There are two similar specialized systems on the market. Both are too expensive, you pay for them about two and a half thousand crowns. The second name was sent to a small editing. And we asked: is it expected that the "player" who is ready to pay this account will pay? The kit is a simple pump with built-in clock. Once a day it turns on, and the water rolls out of the water. Water flows in droplets of drops that have three different colors depending on the power of watering. For each of them you can install up to 12 hoses.
Food on the site you need to install two or more rods, then spread the splashing zone in such a way that they intersect. In this case, dry zones will not. About the scale, too, do not forget.
Now fueled the pipelines for the automatic watering system. They drawn from the point of water intake into the system. Try to organize a gasket with as far as possible pipe flow. It is not recommended to lay them too close to other communications.
Depending on the flow, you can define flowers depending on their preferences, and each of them gives an optimal amount of water. We went through the line. First, we need to know how much water flower needs to be used to what it is used to. In accordance with this, we gave the amount of water from the divider.
The light gray split gives 15 ml of water per day, 30 ml of gray and 60 ml of dark gray. In addition, you can attach up to three parts of each of the crochets for watering scored in color. Depending on the amount of water, you can combine about any quantity for each flower.
Back to the category
Equipment for automatic drip irrigation system
In any system of irrigation, whether it is in a greenhouse or lawn, you must enable the pumping station. The power of the equipment for the automatic irrigation system is selected in accordance with the required pressure in the system. To provide a pressure of 4-5 atmospheres, there will be quite enough ordinary budget hydrochet, which in a large assortment is presented in construction supermarkets. If there is a low pressure in your water supply system, then you need to add a storage capacity of 0.5 m³ to the hydrophore.
Time when it sells the system, has nine liters. Therefore, it is recommended to calculate how many benefits you need every day. And multiply this number on the number of days when you are out of the house. There are no problems with the choice of another, larger space, or rather, sniffing flowers in the bathroom and filling as a messenger of the bath.
Do not underestimate this figure, the pump may be damaged during operation. In this case, you can hardly apply a bond. You will not find any controls on the transformer to set the charging time when the transformer is enabled in the socket. Time changes after each re-enable transformer. After a possible power failure, time will change depending on the re-activation time.
Pipes for the system are picking up at your discretion. Most a budget option - Blue plastic. From the point of water intake, a pipe with a diameter of 40 mm will be needed, which is paved to the first tee in the system separating the central highway. Next, the pipe with a diameter of 16 mm or 32 mm is laid. At low pressure, it will be possible to do with a pipe with a diameter of 32 mm. From electromagnetic valves - a tube with a diameter of 16 mm.
Do not forget to blind all unused holes in the separators. You will have a flood in the apartment. Quints should be higher than the water level at the time, otherwise the drops will continue, even when the pump is turned off. If you have flowers that need less than 15 ml of water a day, you can assemble them on a pod and allow water to drip there. Quintyls should be ceramic so that they can absorb water. On the other hand, if you want to add more weight, combine more than one pipe with several different springs.
If it is an hour after the end of the vignette, pour water into the machine, leave the flower from the divider less power. That is why he pays the "setting" system before leaving. As a rule, it is argued that the plant is better beats less than you. However, it would be nice if this product has enriched the range of rental companies in specialized stores or in the hobby markets. For a person who travels more and more for a long time, this is an interesting advice. Especially for those who depends on their colors - so they can relieve life.
The system must be designed so that the location of the valves is as compact as possible. Preferably in one place, then such wells will be a bit. This will allow you to save additionally. The number of adapters, couplings and tees, and their diameter should be selected according to the features of the project.
Modern automated system is a computer. Even with such an inexpensive device, you can order a drop of water, splashing for a week. For some households there may be a pressure limit of 4 bar. This is not the only brand on the market.
The greater choice offers Gardena, an expert in the segments of the hobby system of watering. It would be nice to choose one of the starting sets to try. According to him, these sensors make an automatic bombardment of the perfect assistant. When the system detects that the soil is a little wet, it will correct yourself, and therefore people get automation, even if they do not know, only with automation you can keep in touch with a jug, but you can achieve perfection with the system, it comments.
Next, you need to select the rods. The best option for the greenhouse is drip irrigation. For the device of such a system, drip tubes for the length of the beds, injector and drip fittings will be needed. Injector can be delivered later. It is necessary for feeding fertilizers. For watering lawn, rotary rods are best suited. Such irrigation irrigances cover maximum Square, and inoperative time they are invisible. Fan or static rods are well suited for watering colors.
But it is true that these sensors are no longer so cheap. The automatic irrigation system begins with a water source. It may be pond, pond or pond, well or water supply. If the pump is used, it should be constructed, especially with respect to the irrigation system. Kitchens for residential buildings usually do not have the desired characteristics. In case of use drinking water To damping the water pump, you can also use as a domestic water supply. Another element of the system is filtering.
It is important for reliable operation. It deals with the removal of water from solid and biological pests, especially from the moment of death. You can use the full range of filters for different systems. Direct or disk ribbons are simply used or flushing, longer open presses or pressure filters and other devices. The filter selection determines the type of water source and, moreover, the filter tip during attenuation. Without reliable filtering of the irrigation system, it cannot work reliably.
The most important element without which the watering system is simply not automatic, is the controller. Modern controllers have many functions, on the number of which the cost of equipment depends.
The closing valves of irrigation systems are controlled by Seleoids on the team of the flame control unit. They are calculated, performed, are monitored in individual groups at the same price. They are installed in the gym and are available after the elevator. These fittings usually do not require any maintenance, except for monitoring in winter and spring and spraying. The powerful element of the bombs are scrapers, falling hoses and micromatic elements. Dispensers can be separated in accordance with the distribution of water for sprayers and rotors, depending on the location of the underground and overhead, depending on the power, distance and material of the execution.
Few who gives pleasure every day to water the lawn near the house from the hose. Yes, and you can argue about such irrigation. You can forget about it if you make automatic irrigation of the lawn with your own hands. First specify irrigation rates, decide on the water intake point and select the type irrigation system. After that you can independently draw the scheme and calculate the auto oppression, and then proceed to the installation. Step by step instructions and useful recommendations They will help to cope with the work.
Lawn irrigation rates and other requirements
Regular watering is the key to beautiful emerald grass. To make automatic irrigation with your own hands on all the rules, you need to follow certain norms. It is important to take into account the flow of water, its temperature, time and frequency of irrigation.
Automatic watering on the plot
Perfect Temperature for Grass
The ideal conditions are considered as close as possible to natural. For gentle grass, it is very undesirable to exposure to cold, below 10 degrees, water. In order not to harm the leaves and the root system, it is desirable to water the lawn with water of about the same temperature as air and soil - no less than 18-20 degrees.
If water for automatic irrigation is supplied directly from the well or well, its temperature is usually very low. To solve this problem, accumulative containers are used - tanks in which water is heated. The system of automatic irrigation spray water on the smallest particles. They instantly heat in warm air and plants receive water acceptable temperature.
Automation will start itself in the programmed time
What time and how often to water
Depending on the air temperature, the frequency of irrigation of the lawn changes. If the weather is cloudy, there is no strong heat and the scorching sun, the automatic watering can be reduced to 1-2 times a week. In the arid period, grass needs daily irrigation. Otherwise, propellant begin to appear, the leaves fasten, wither and yellow.
Automatic watering is good because it is possible to completely forget about the care of a lawn, caring only about the timely haircut. It is important to choose the time of watering. It is best to do this in the evening or early in the morning. Then water will be able to impregnate the soil well, and root system It will be time to appreciate moisture before the hot sun is dried.
It is extremely unwanted to water at noon. At this time, the strongest is observed solar Activity. Drops that fell on the grass instantly evaporate, leaving burns on gentle shoots.
Water consumption for watering - how much
Main question - What should be water consumption on watering lawn. This is a relative parameter. Water consumption depends on a number of factors:
- soil type;
- grass grade;
- the location of the lawn;
- weather conditions.
Water consumption ranges from 10 to 20 liters per each square meter
Clay soils, loam and other heavy soils kept moisture well, so on such a plot of lawn should be watering less. Sand, light soils need more frequent and abundant irrigation, because water quickly goes into deeper layers.
The generally accepted rate of irrigation of the lawn by 1 m 2 is approximately 10-20 liters. With this consumption, the Earth is impregnated with water by 15-20 cm. In the usual manual watering, this indicator is easy to check the experimental path, but when using automatic, it is a bit more complicated.
During the operation of the automatic sprinkler, put an empty transparent container on the lawn, for example, a jar. When it is filled with about 13 mm, 10 l / m 2 water will be poured on your site. If you need a consumption of 20 liters, wait until 25 mm of water is added to the bank.
Another factor affecting the water consumption is the location of the lawn. If the site is located on an open sunny area, more water will be required for each meter than the lawn in a deep shadow. However, it is necessary to take into account that the shadow can be different. If it gives large trees that grow on a lawn or near it, water may need even more, because deep powerful roots of trees suck out a lot of moisture from the ground.
The main rule of irrigation of lawn is better less often, but more abundant. Frequent minor wetting surface of the earth will not bring the desired effect. Most of the water evaporates and without reaching the roots, and the earth from such watering will cover with a crust and will not pass the air is vital for the root system.
Choosing a place of water intake
Based on the regulatory consumption of water 20 l per quarter. m, it is easy to calculate that for watering a small lawn, an area of \u200b\u200b10 square meters. m will need 200 l (0.2 m cubic meters) each time. In hot weather or in the first season after laying a rolled lawn coating, when irrigation is carried out daily, and even twice a day, such water consumption can fly into a penny.
In order to make a fleet of lawn with their own hands, you can use one of these options for water intake:
- central water supply;
- well;
- well;
- outdoor reservoir.
Well and small pump can be invisible on the lawn
The lawn irrigation system connected to the central water supply is a stable option. Water is always in unlimited quantity. But the auto oppression is a large load on the water supply network. The system requires high pressure - no less than 3 atmospheres. At such a pressure, all the neighbors immediately feel that it began to irrigate, because in their pipes the pressure can fall significantly.
To prevent this, the system of automatic irrigation of the lawn is connected to bypassing the water supply at home. To adjust the pressure drops, the equipment is equipped with an expansion tank, which is filled with water and maintains the desired pressure in the pipes.
Good alternative - Shahny Well or Artesian Well. Both options require initial financial investments, but then it will be possible to swing freely clean water in unlimited quantity. In this case, the pressure is supported by the pump, but no one will suffer from the neighbors, because at their pressure, it will not affect their pressure.
If in open access on the site is a pond - pond, access to the river or lake, can be used by this option. But to neglect the cleaning step is unacceptable. Despite the fact that the organic inclusions that such water are rich can become good fertilizer For the lawn, large particles will very quickly score all the nozzles.
How to choose a fleet system
Automatic irrigation of the lawn is not so easy to choose - there are several types of its varieties. It is very important when choosing to take into account the type of sprinkler and the control method, and for this you need to get acquainted with all possible options.
Types of automatic watering
There are two techniques of automatic irrigation of the lawn:
- sprinkler;
- drip.
Installation for irrigation in a circle
Sprinkler type auto pumping system - with spinners, is a pipeline wiring throughout the lawn area. At certain points on the surface there are special distributors. The grass is watering from above, as in natural conditions during the rain.
To understand how the lawn auto oppression is arranged drip type, It is necessary to imagine flexible perforated hoses that are decomposed on the site. Hoses are connected to the water intake point, and water enters plants through holes without pressure. Since the type of these pipes is usually not very aesthetic, an underground irrigation technology is used for automatic irrigation.
The underground watering device for the lawn requires the laying of hoses with holes not over the surface, but directly under the ground. So water falls directly to the roots. So that the openings are not clogged, used agrofibular. With this scheme, the consumption consumption consumption is reduced, and the scene is obtained by the desired amount of moisture.
Sensor to control humidity
How to manage automatic irrigation
Auto oppression management is carried out using a special controller that can be configured in accordance with its preferences. This happens using the valve system that opens and close in accordance with the settings of the microcomputer and timer. There are programmed modes that speed up the configuration process and facilitate control.
The high-quality system will be equipped with a sensor measuring soil moisture. If recently it was raining and the ground is still quite wet, automatic watering will not re-fill the lawn. The sensor will react and postpone the inclusion. There are also frost sensors that protect against watering with a sudden cooling. You can configure the installation so that irrigation will be carried out exclusively according to the sensor readings, and you can use it as an addition to manual adjustment.
Some models combine the coverage of several sites at once. Thus, it is possible to set a specific program for watering the lawn, and the other is for irrigation, for example, flower beds. Multitasking timer can cope with two lawns.
Types of splinters
What splinters to choose
There are many raspberry varieties for automatic irrigation of the lawn. Each manufacturer tries to improve existing models and come up with their own design of the "ideal" distributor. The most running varieties of rods:
- rotary;
- static;
- oscillating;
- hose sprinkler.
Pulse models are watered with thin jets
Rotary splinters consist of two parts: fixed base and moving rotating head. During rotation, the water jet is sprinkled at a certain angle, with a turn around the axis. Pulse splashpers provide watering in a large range, the entire area is evenly irrigated.
Static irrigators are fixed. They feed water in a given plane. Circular static irrigation heads spray water in all directions - 360 degrees. There are adjustable models that can be configured so that watering will be carried out by 25-360 degrees, which is very convenient with a complex lawn configuration.
The first two varieties is not the best way For plots rectangular elongated form. Irrigation is carried out within the circumference, so it is difficult to descend the irrigation scheme to accurately. A good alternative is the oscillating sprayer for watering the lawn. It is a perforated tube on the basis of which moves along a given trajectory. As a result, the scope of such an irrigator has a rectangular shape.
Oscillating sprinklers for rectangular sites
The sprinkler hose is a long flexible tube with a multitude of holes. When water is supplied to the pipe under high pressure, irrigation is carried out of all holes immediately - in all directions.
Auto parking laws do it yourself
If you want to save at the cost of installing the automatic irrigation system, or you just want to try your hand in this case, you can make installation with your own hands, without attracting qualified personnel. All the necessary equipment is now sold in free access, and make up the plan and the drawing you will certainly be able to independently.
Plot irrigation scheme
Scheme of automatic watering
To understand how to calculate the fleet of lawn, you need to make technical documentation of your project. Start the design of the self-made system is necessary with the compilation of a detailed drawing. On the scale, designate the loop outline, all shrubs and trees, if they are on its territory or in close proximity to it.
Then the fireproof scheme is being developed. Depending on the area and the geometric shape of the site, sprinkles are selected. You need to portray a schematic radius of the action of each rod. Such a drawing is called an irrigation area coverage plan.
When you defined with the location of all spins, you need to work out a water supply scheme. Starting should be from the place of water intake. On the plan, please all pipes on the scale, as well as all fittings and fittings.
In accordance with the plan produce all earthworks
Since the resource of the water intake point is not infinite, you need to know its bandwidth, that is, how many irrigation lines can work simultaneously in optimal mode without loss of quality. The calculation is made depending on the range of splinters - than it is more, the higher the need. Produce measurement:
- Connect to the water intake point hose.
- They flow the time for which the 10-liter bucket is recruited.
- Measure the distance from the point of water intake to the very long point of the site.
- For every 15 m add 1 s.
Water consumption table with spins
The total need for connected devices that can be serviced simultaneously must be below the water intake bandwidth. If the entire automatic system cannot be launched simultaneously, it is separated into several separate branches and cut off with valves. Another rule - rotary and static raincoats must be installed on different lines.
Now you have three documents on your hands: the plan of the site, the irrigation scheme and the planning plan of the water supply, the necessary performance of the equipment is determined. Based on this information, you can create a estimate to count the value of materials.
Lines are separated from the highway using valves
Necessary equipment
When the project is drawn up, you can proceed to the choice of facilities for watering the lawn. Standard system includes:
- pipeline;
- sprinklers;
- controller;
- EM valves;
- pump;
- filter;
- pressure level regulator.
Installation equipment automatic system
Pumping station For automatic irrigation, it must be seamless based on the calculation of the water consumption of the system. Chief Criteria - operating pressure. The filter must protect all the equipment for watering the lawn, in particular, nozzles, from possible pollution and blockage by large particles.
For optimal work of the sprinkles, you need to correctly pick up the nozzles for watering the lawn. Some automatic watering in the specified sector, the other - the strip. The use of nozzles allows you to rationally position the rods on the lawn.
Right nozzle irrigation
Water pipes for gas watering are usually carried out from pipe-PVC. The diameter of 32 mm is the most appropriate. Due to the small length of the pipeline, the diameter of the pipe does not make sense. All connections are necessarily compacted. PVC pipes are quite elastic. If desired, the rotation of 90 degrees can be done without the use of the coated fitting, and simply beating the pipe to the desired angle. In this case, you can do one only tees.
Rainers are connected to a trunk tube by means of cutting fitting. Each branch of the system is regulated by the valve. Valves are combined into groups. Groups are placed in special protective boxes. One box can be installed up to four valves. To connect to pipes, the valves are put on special saddles and fix the compression clutch.
All valves must be set hermetically
Installation of automatic irrigation of the lawn
When all equipment is purchased, you can proceed to direct installation. Instructions, how to make a fleet of lawn properly:
Works are carried out so as not to spoil the lawn coating
In order for automatic watering to light the hectare of a long and without unpleasant surprises, it is necessary to take care of it:
- We regularly inspect and clean the nozzles from possible contaminants (land, sand, beveled grass).
- If the soil in the spray area asked - add a new or shortening the fastening fitting of the splinter.
- Check the battery of the controller in a timely manner.
- For the winter, the system must be allowed: to drain the water, blow the valves, move the sensors into the room.
- Control the status of the filters.
Installation of the automatic irrigation system is a rather troublesome lesson. Since after the end of the work, all the equipment will be hidden, it is difficult to eliminate malfunctions on time. Therefore, performing the installation, you need to be 100% confident in your abilities, and even better - entrust this task to professionals.