Many argue that the decoration of concrete and metal stairs to wood is better than making wooden, as cheaper, do not creak and more reliable. "How many people, so many opinions," therefore do not argue with supporters of concrete or metal structures, you need to deal with these issues yourself.

High price of ladders from wood: Fact or myth?

When choosing concrete or metal structures, you should not forget about the need for their subsequent finish. You can perform this in several ways:

• Install only wooden steps - in this case you have to think appearance risers and pick up material for the trim. The reason will cost cheaper, but taking into account the financial costs of finishing materials and work the final cost will be approximately the same compared with the manufacture of similar by parameters wooden design.
• Waste a tree completely (from below and on all sides) - regardless of the base material, the price of such a staircase will be much higher than just wooden.

It is also important to take into account the complexity of work - with independent finishing with a tree of metal or concrete base, the workpiece will have to be customized on the place under the existing dimensions of the structure.

Problem Skripov

Metal stairs will also creak. This may be caused by such reasons:

• poor-quality assembly and welding of structures;
• not enough rigid fastening to walls or semi.

As a result, the friction of parts of metal among themselves (under the influence of loads when walking along steps) leads to a screen. Similar flaws are quite common, and their elimination is a laborious process. An even more difficult repair will be in the event that the places of fastening of metal parts are hidden under wooden finish.

Concrete stairs do not creak, but the situation is different with their finish. Make steps perfectly smooth in height is not always obtained, so for alignment, as well as the fences of wooden steps from concrete you have to use liners from plywood or OSB. But the more structural elements in the node, the higher the risk of squeaks. Also, the quality of concrete base finishes and the absence of hoptes depends largely on the level of artist's skill.

Question of reliability

The reliability and durability of wooden stairs depends on the wood breed used for their manufacture. Designs from oak, beech and ash, which are characterized by high hardness, will serve at least 50 years. And for proper care And compliance with the conditions of operation, their service life will be much more.

Another feature - the manufacture of wooden stairs is performed in the workshop room according to previously developed drawings. This allows you to take into account all the nuances still at the project development stage guarantees the exact correspondence of the sizes of all the same structural elements relative to each other.

Do not worry about the fact that the wooden staircase will creak. Designs made in production conditions with compliance with fastening and gluing technology are completely devoid of this shortage. Lufts may appear after decades of operation. But this is not a problem, since experienced specialists know many ways that allow you to not completely get rid of squeaks, then it is minimized to minimize them.

A tree is warm, durable and natural material, so wooden stairs have no analogues on external and operational qualities.

You can buy the second floor, and, most importantly, pick up a comfortable and comfortable staircase upstairs. But, the stationary staircase is not so little, especially if it is overall. But the manufacturers have tried to please all categories of citizens - so inexpensive stairs appeared on the second floor of the cottage.

As a rule, price reduction occurs due to a decrease in the size of the ladder itself.

Strangely enough, but it is small structures that are gaining popularity, as:

• They look very adequate;
• Fit in almost any interior;
• The price is significantly lower, and the variety of species remains.

Indeed, monumental structures are not everywhere will be to the place, which is especially concerned with small houses with a second floor.

The stairs have a number of requirements, including the width of the passage to be equal to the width of the stairs. The second floor is also hardly big, and the huge passage will simply ruin everything.

Not everyone affarted the expensive options, especially if only the house was completed, and the repair was completed. Acceptable price helped small-sized stairs to take their niche on the goods market. Indeed, the diversity of materials and the design options for logging on the second floor allows you to find exactly what I want, even at the most arrogant taste and complex interior style.

It is quite possible to make a wooden staircase, if you competently approach this process. On how to do this, we will tell in the article :.

Materials for inexpensive stairs

Often, the price itself affects the material itself, from which the staircase is manufactured. Moreover, almost always the choice of expensive materials instead of the usual is caused exclusively to the prestige and the desire to boast. And on the operational characteristics, inexpensive materials are often even better and more reliable.

Most often, inexpensive stairs are made from materials such as:

• Concrete;
• Metal;
• Wood.

The concrete staircase is considered one of the most reliable. It can be found in any entrance of a multi-storey house. Street staircases are made of the same material. But this does not mean that such a design can not be used in the country. Maybe it looks like not too beautiful and expensive, but reliability is guaranteed.

Stairs, consisting of metal, are rare, it is clear - so that the staircase is durable, the metal should not be soft, and weighs such a design a lot. Most often, the metal is combined with other materials, for example, with tempered glass. Metal wrought railing looks especially effectively.

Depending on the size and material, the cost of the screw staircase can begin from 10 thousand rubles, which is really quite inexpensive. Even if the staircase is made to order, then you can save anyway. The main price of the price is, oddly enough, for additional work - measurements, drafting diagrams and drawings, as well as the owners are often compiled by the estimate. If you do everything yourself, it will save at least 15 percent.

As many as many can save, refusing the finish. It can be done independently. Yes, and independent installation will leave the owner about 20% of the total amount.

The most economical version of the spiral staircase - with a stop at the carrier pillar. It is made from metal pipewhich has a diameter from 5 cm. The fan of a wedge-shaped fan is attached to it. There are other options - with a support on the wall, on cosos, well type. However, it is such a design on a pipe that is the most reliable. It also makes it possible to perform a rail device, which provides additional safety. This is relevant for the elderly and families where there are children.

It is necessary to take into account the fact that the spiral staircase is very significantly saved by space. If for a big house it is not so relevant, then for small premises This configuration will become a real salvation. In addition, to separate how the steps themselves and the supporting pipe can be different ways. For example, they are painted with special paints, covered with varnish.

Cheap stairs for summer cottages on the second floor

It is clear that those people who are trying to save on the installation and decoration are unlikely to order a staircase for several hundred thousand rubles from the precious woods, and many people begin to doubt the quality and reliability of inexpensive structures.

It is worth considering that:

• The finished staircase may differ in size;
• Order specifically - expensive;
• Inexpensive models can be made of poor-quality material.

All these doubts are quite easy to dispel. Yes, the finished sets for mounting stairs have strict proportions, but you can not be mistaken if you do well all measurements. The ladder on request also may not hit the wallet too much if part of the work take over. And the savings on the materials are due to no low quality, but the similarity of all models - they are the same to the last screw, and vary only in size, and quite slightly.

A pleasant appearance inexpensive staircase will provide grinding. She will eliminate borrowers and other troubles. In addition, increase durability and strength.

Further finish is made solely for the taste of the owners. Wooden designs are usually covered by varnishes. But the metal is quite painting, not only the railing, but also the steps.

Comfortable inexpensive stairs to the second floor for cottages (video)

Choose an inexpensive staircase model for country house Not too complicated. And even here you can make everything much cheaper if part of the work will perform the owners. Inexpensive - does not mean bad, so no need to be afraid of such structures. They also serve for a long time, and look beautiful.

Good luck in experiments!

Details: Cheap stairs to the second floor (photo of examples)

It all depends on the product of what quality you expect to see (and observe for many years) in your home. If you are not embarrassed by errors in the form of malnutrition, cracks between the details, squeaks when walking, poor-quality painting, cheap glue

etc., but for a small price, then you will quite satisfy the economy version from shops providing a number of construction services.

If you are attracted to the quality of materials, assemblies, painting, you are a 100% client of furniture salons and professional manufacturers who control the manufacturing process from the measurement stage, drawings and project before mounting and passing the facility to the customer.

So, consider a cheapest option. You are going to the store, where you can buy everything for repair, construction, etc., buy details for your future staircase and begin to fool with this "designer" (or yourself, if you have the necessary tools or hired installers). And it seems to be a full-fledged staircase in the house instead of a ladder, but where are unexpected and unpleasant "surprises" (slots, screens, etc.) come from?

All this is very simply explained. If you ordered a staircase from professionals, we would get the following advantages:

• on your facility will make all the necessary measurements taking into account all the nuances: the features of the frame, the placement of windows, etc.;
• you will be provided with drawings, you will agree with the type of stairs, design, material, color and, of course, the terms of manufacture;
• the material is fluttered to the brilliance (not only on the machine, but also manually);
• all the details of the stairs retain their appearance, as they will be made of a sliced \u200b\u200btimber, glued with high-quality glue;
• you will also see your staircase in the draft version (during the preliminary assembly) and at this stage will be able to adjust some nuances;
• during the draft master, the master will force the details taking into account the uneven walls, the errors of the carcass, etc.;
• after that, the details are spoiled and painted again. Painting will be a multi-step using high-quality paint materials;
• and now, this product of great work will be brought to the installation ... Rich and luxurious, she will delight you, cause a feeling of delight from your guests.

Is it all available in the economy?

Make conclusions, solve and order from professionals!

Most Popular

Security: how to close the ladder from the child

When the child first becomes his feet and makes the first steps, he begins a fascinating journey through the house. On his way there are new items. They, of course, are very interesting for little manBut, moreover, they can be extremely unsafe for his health.

What staircase to choose a metal or wooden?

Design a staircase should be designed before the construction of the inner partitions, given the material from which the house was built, the size of the opening, the distance between the inter-storey floors and the location of the structure. What product to put in a residential premises so that it successfully fits into the interior, was distinguished by practicality and durability?

The basis of any staircase is its functionality and aesthetics. The practical component is paramount. But the appearance plays a significant role.

What material is made of design, affects it technical specificationsand on the design. Consider questions, what staircase is better: metal or wood, which affects the use of each of these materials, and where it is better to use such a design.

By appointment, all stairs can be divided into:

• Entrance;
• Internet;
• Passing;
• Workers.

By location, they can be outdoor or internal, according to functionality:

• Stationary;
• Portable;
• Transformable.

The stairs differ in the manufacture of the manufacture:

• Concrete;
• From natural stone;
• Brick;
• Wooden;
• Metal;
• Glass;
• Combined.

Type:

• Screw;
• March;
• Combined.

Marsh stairs are most common in use.

They are easy to manufacture, can be:

• Single-sample;
• Two-hours;
• Multi-hour.

Screws are more suitable if necessary to save space indoors.

Combined options are often chosen for individual projects.

Designs of stairs

Constructive staircase consists of:

• Carrier system;
• Steps;
• Fences.

As a carrier element can be:

• Boosters;
• Theets;
• Hospitals;
• Racks.

Kosomers are one-piece supporting beams, the steps are attached to them from above. On the crosses most often made marching wooden stairs.

The guards have special grooves on the inside, where the steps are inserted.

Bolf can serve as fastening steps to the wall, and also fasten them among themselves.

Central support racks usually have screw staircases.

Metal supports are most suitable for the device of screw and curvilinear stairs.

Fencing stairs consist of:

• Railing or handrail;
• Reference and intermediate pillars or bassine;
• Decorative elements.

Each of the elements of the stairs are presented their requirements. In addition, the entire design of the staircase should also correspond to a number of conditions.

Basic requirements for stairs

The basic requirements that the material of the staircase must match:

• Strength;
• Moisture resistance;
• Durability;
• Chemical resistance;
• Resistance to atmospheric influences;
• Fire safety;
• Ease of installation;
• Environmental purity;
• Convenience in operation;
• Ease of care;
• Aesthetic appeal.

Additionally, steps must have high abrasion resistance, have a non-slip surface.

In addition, the value of the design of the staircase is of great importance.

Stretching staircase

According to the strength characteristics, the tree is significantly inferior to the metal. However, the valuable wood species have sufficient strength necessary for normal operation of the staircase.

The most solid rocks are:

• Maple.

From the other options it is better to choose a larch, which is stronger than pine and other soft trees.

By strength connections individual elementsWooden designs also losing metal. Over time, the tree dissipates, the joints of the compounds are loosened.

There is no such problem from the metal staircase. The design of the metal staircase has:

• Reliability;
• Stability;
• Rigidity.

An exception is aluminum. It is a soft material, it can be easily deformed.

Moisture resistance elements of stairs

The impact of moisture is equally destructive and for untreated wood, and for conventional steel. All wooden elements must be protected from water using special means:

• Moisture-resistant impregnations;
• Colors;
• Varnishes.

With the outer operation of wooden stairs, such protection is needed. It will be constantly updated. For example, beech unstable to moisture may be deformed, and the larch is not amenable to rotting.

Modern production technologies make it possible to produce wood-based materials that are reliably protected from the destructive effects of water. For example, a wood-polymer composite.

The usual steel is absolutely unstable to corrosion, and requires mandatory processing. So that the rust does not reduce the strength characteristics of the metal structure, the metal color is needed by special compositions. In addition, the metal will need constant care to maintain the appearance of the stairs and increase its service life.

Corrosion resistance is:

• Stainless steel;
• Aluminum;
• Chrome steel.

If the design of the staircase is assembled not on welded connections, then from these types of metal systems can be operated on the street for a very long time.

But if welding applies, the locations of the elements require special attention. They must be carefully cleaned and covered with protective compositions.

Durability

Wooden stairs can serve for quite a long time. Visual examples are magnificent staircases in many historical buildings.

But this requires the use of valuable wood species, which is excellent prepared, well succumbed, processed by special compositions from:

• Rot;
• Mold;
• Fungi;
• Insects;
• Rodents.

In addition, appropriate conditions for the temperature and humidity regime are needed. In the future, the finished design should be constantly maintained in aesthetically attractive form.

Exterior wooden stairs, which were not on time and properly processed, quickly lose normal appearance.

Restore it is sometimes no longer possible. Metals, stainless steel has the longest life.

The usual profiled steel will last longer wood.

But it also requires special processing and subsequent care.

Stability of materials to aggressive and atmospheric influences

If we compare the resistance of the tree and metal with respect to aggressive and atmospheric influences, then metal structures have higher technical indicators.

The tree is very susceptible to most acids, alkalis and other adverse factors.

Fireproof stair system

If you consider the issue of fire safety and metal, it is definitely deciding not in favor of wooden structures.

Wooden staircases in the building should be located away from any possible foci of fire. Even the processing of their special flame retardant compositions does not give a complete warranty of fire safety.

Metal structures resist the exposure to high temperatures much longer. Of course, they also lose their specifications As a result of the long action of open fire. But in the process of fire, the metal does not highlight the combustion products, it does not occur on it.

In order to reliably protect the metal designs of stairs, they are covered with special flame retardant compositions and paints.

Easy processing material and installation design

The tree is much easier to handle than metal. For this reason, it is possible to independently perform more forms, sizes, decorative elements.

Metal is increasingly harder. In the factory conditions, it is very plastic and can be performed:

• Profile products;
• Casting;
• Forging.

But all this will have ready-made details, or separate modules from which you can collect not so many options for stairs. As a rule, the instruction of the manufacturer is attached to them.

The manufacture of individual structures under the order immediately leads to the rise in the cost of the product. Independently perform a wrought staircase or use welding machine, Few people can.

Environmental purity material

The naturalness of the tree, its valuable properties for creating a favorable microclimate indoors are well-known facts. No other material compete with this is not able to.

Often the choice in favor of the wooden staircase in the house is made precisely for this reason. The tree creates a unique coherent and warm in any room.

From an ecological point of view, there are no questions from an ecological point of view. However, when various chemicals are used to protect wood, it is required to be very carefully approaching their choice.

Environmentally friendly Material - Tree

Important! It is categorically impossible to use for wood processing inside the house materials intended only for outdoor use. They, as a rule, protect the wooden surface from various adverse effects, but distinguishes the substances dangerous to human health.

It is necessary to pick up impregnations, paints and varnishes with natural components. More trust deserves products with certificates - famous brands.

Metal itself is an absolutely clean environmental material. The problem with metal stairs can create its treatment with unsafe compositions.

Therefore, they should also be suitable for their choice.

Ease of exploitation of stairs

Wooden stairs are more convenient for operation than metallic. Safety of descent and lifting for not slippery steps that areolate sounds, the pleasant nature of the steps and railings is an indisputable advantage of a tree. They do not create inconvenience when walking.

The only serious disadvantage can be called the presence of the screenshots. It often occurs in the process of operation, due to the drying of the tree or improper assembly of the design.

The disadvantages of metal stairs when operating them can be called:

• Slippery steps;
• Low noise insulation;
• Heating designs in the sun and strong cooling at low temperatures.

Slippery metal stages can represent a serious danger, the movement on them requires greater caution. If there are children in the house, then use the metal staircase becomes even more dangerous.

The noise that is created during the operation of the metal staircase can be reduced by applying special coatings of steps.

Metal has a property to respond strongly to the temperature, which makes it unsafe in use. With long-term heating of handrails in the sun, they can cause burns. When the temperature ambient It goes in the range below zero, the unprotected skin of the hands can also suffer from direct contact with the metal.

One of the options to avoid this is the finish of the railil tree.

Aesthetic attractiveness of stairs as decor element

The question of the design of stairs from wood and metal is purely individual. Someone prefers naturalness, natural beauty of wooden structures.

Others will choose from metal products.

Purely metal designs of stairs can not boast of such a large variety of performance options like wooden models.

The cost of the design of the stairs

From the tree the most a budget option - Pine staircase.

For a metal staircase, the simplest design from ordinary steel profiles.

But it is very little costly and, accordingly, purely practical options. Not about any aestheticism here does not particularly have to speak. If you choose more design solutions, mostly metal staircase will cost more than a wooden.

Yes, when using exotic tree species with the use of artistic decoration elements, the price is exclusive option It can reach huge amounts.

Which staircase is cheaper: wooden or metal - depends on the type of material, the complexity of the design. But this choice is purely individual.

Combined designs of stairs

In order to use all the advantages of materials and reduce, or even eliminate their disadvantages, you can use the combined version of the stairs.

The combination of metal and wood in the structures of a very common phenomenon, they perfectly complement each other.

From metal and wood stairs can be used both inside the building and outside.

Stairs on a metal frame

Mainly extinguished staircases are mainly used, which consist of:

• Metal carrier frame;
• Wooden steps;
• Combined fencing.

That is, the metal acts as a longer and reliable support option. Tree attached an attractive appearance, ease of use. Wooden stairs with a metal base can be made of any shape and size.

The main advantages of them are:

• Durability;
• High strength;
• Rigidity;
• Stability;
• Easy assembly.

The cost of the combined design is most often much cheaper than a fully wooden staircase.

Modern metal production technologies allow you to create lightweight structures. They can be sewed not only with natural wood, but also various materials on its basis.

In order to reduce the cost of the stairs, you can combine expensive wood varieties - for elements with high operational load, and cheap breeds - for products less subjected to wear.

For example, made of solid wood:

• Steps;
• Supports;
• Handrails.

From pine or birch can be raised:

• End parts of steps;
• Framework;
• Plinth;
• Other vertical parts.

Wooden steps that are attached to a metal frame, get rid of scribeing, they can be easily replaced if necessary.

In addition, wooden steps have the greatest safety when moving along the stairs. Less probability of slipping - injuries when falling will not be substantial.

Posted by stairs metallic frame A completely new look is quite simple, if you completely change all the wooden elements.

Combined staircase - Photo

Metal frame can be completely closed with wood.

The construction strength will be high, and aesthetically it will look like a wooden.

Stairs with combined frame

You can combine different variants Supports and fences. For example, wooden steps are based on one side on Kosur from the tree, and the other side is attached to metal hospitals. Metal fence gives the design additional strength.

The options for a combination of ladder structures made of wood and metal is a lot.

Combined fencing of stairs

Another option is to combine the staircase fence.

Cold metal railing and handrails are trimmed with wood or completely performed from it. Support poles can be made from both materials.

Filling the internal space between them is possible from decorative metal elements.

• For the outer operation, it is better to choose a variant of a metal staircase - it is less susceptible to external atmospheric effects;
• Indoors fit perfectly combined option - The combination of strength and stability with the aesthetic component will give the user much more convenience than mono-material stairs;
• For the device of the attic stairs transformers, it is better to choose lightweight metal structures;
• Any work stairs should be made aluminum;
• Fully wooden structures, unambiguously, perfectly fit into the design of a wooden house.

What is better: metal or wooden staircase? Everyone comes to this question individually. There is no unambiguous answer here, and everyone has a choice. More information about the designs of stairs from wood and metal can be found by looking at the video in this article.

When erecting a multi-storey building, it is worth considering the whole project as a whole. Special attention should be paid to the staircase, since some models of these products are best fixed as the house buildings.

In this regard, a natural question arises: "What staircase to choose?". Thanks modern materials You can easily build a wooden, metal or concrete staircase of almost any form. It is necessary to take into account not only the cost of the ladder itself, but also the costs of its finish. Therefore, we consider all the pros and cons of products from the most common materials, as well as the forms of stairs.

Types of stairs

There are three main types of stairs that are built in country houses:

• Straight. This is the simplest and cheap embodiment of the staircase independently of which material it is made. A free space is formed under the staircase, which can be left unchanged or fill it with niches and cabinets for storing things. As a rule, the width of such a staircase does not exceed 1 meter. Also, the direct staircase allows you to build the most comfortable steps, the optimal width (slightly longer than the feet of the adult).
• Movie. In this case, direct zone appears between the two staircases. Such structures are optimal for spacious premises with high ceilings Or if the house is assumed to more than 2 floors. The staircase can be a M-shaped or p-shaped.
• Screw. This is an option for small areas.

All these stairs can be made of both metal and concrete or wood.

Metal stairs

Such stairs are optimally fit into the design, in which there are forged fences, railing, and so on. But they are also perfectly combined with wood, glass, stone. These are reliable, durable and very strong structures. They are able to withstand heavy loads, and the installation of such products is carried out at any stage of construction or after its completion. Metal fireproof, resistant to mold and fungus. In addition, such stairs are cheaper than all.

But there are such structures and cons. For example, if we are talking about a metal staircase without any finish, then its steps will be very slippery. Therefore, these elements are recommended to produce from plastic or wood. And if you think that in contrast to the wooden structure, it does not creak, then they are very mistaken.

Useful! Several stairs are served longer, powder paint powder.

First, if the metal is too thin, then the steps will also be a little under the weight of a person. Secondly, if the steps are metallic, then every step will be accompanied by a hum. If there was not enough rigid fastening to the walls or pumped up the welding, the steps will crush the steps of any tree.

Initially, this option may seem cheaper. Concrete stairs are really worth almost twice cheaper than wooden analogues. But if you build this design, it will not look comfortable. So you have to think about the finish. Some completely cover the concrete tree at all, which significantly increases the cost of the finished product.

If we talk about the pros, then it is worth it:

• Long service life (up to 40 years). Reinforced concrete is able to cope with huge loads.

Useful! The service life largely depends on the climate in the region of living, as well as on the parameters of the frost resistance of the selected concrete.

• On concrete does not affect moisture. This is a fire-resistant material.
• Concrete structures are not interesting to rodents and insects.
• Fast manufacture. Such designs are erected directly in place in 2-3 days.

Useful! Despite the speed of manufacturing such a staircase, specialists are recommended to fill concrete simultaneously with the construction inter-storey overlap or so-called box.

• Lack of load on the wall design. Moreover, we can say that the concrete staircase is an extra point of support.
• No screenshot. Even if a tree was used for decoration, there should be no such disadvantage. The creaking will appear only if the steps are too uneven.
• Multifier forms. Concrete is a very plastic material.

Useful! If you build a wooden screw type staircase, you will have to install the central support pole. In the manufacture of concrete structures, such a need disappears.

Concrete stairs are:

• Monolithic. In this case, they are flooded in place and represent a single whole.
• National teams. You can order the staircase parts and then install it in the right place.

But there are such structures and cons. For example,:

• Concrete stairs due to their impressive weight are suitable only for stone, monolithic, brick, collected-monolithic and other homes with a reinforced design.
• If you sew the whole staircase with a tree or "referring" it under marble or another stone, then its cost will be higher than a wooden counterpart.

Also for independent erection will need a lot of strength.

Features of the installation of concrete stairs

First you need to prepare formwork. After that, the armature is installed and concrete is poured. The first stage is considered the most difficult, and if you have conceived a more complex form, it will be easier to pass the work to the master. Either you can make a straight one-sided design located between the two walls. In this case, side elements of the formwork are excluded, which greatly simplifies work. To do this, it is enough to simply draw the outline of the future staircase on the walls.

Easily more complicated if the design adjacent to the wall only on one side. To do this, you will have to consider the ending elements of the formwork. If you do wrong, the whole design "will go".

Many believe that the tree is significantly inferior to concrete and metal. But in fact, it all depends on the quality of wood. For example, oak, beech and ash are characterized by high hardness. Such stairs serve at least 50 years. And if the owner of the house periodically cares for the staircase and produces processing, then this period can be enlarged twice.

Useful! Due to the low weight, wooden stairs are suitable not only for concrete, but also for frame and wooden houses.

It is also not quite true to the statement that all wooden stairs will creak. If the design is made for all technologies, there will be no such shortcomings. By the way, the most high-quality stairs are produced in the workshop, and not in place. At first, the drawing is being developed (if the elements will not match each other a little, then the creaking and cracks and crack will appear sooner) and then the production process begins. On the one hand, it guarantees quality, and on the other hand brings us to the main mines of such products.

Among them should be allocated:

• Long term making. If a concrete staircase is ready after 2-3 days, it will take at least 40 days to produce a wooden structure, plus the time spent on delivery and installation.
• The possibility of installation only after the completion of capital construction and internal draft works. Otherwise there is a risk of damaging wood. In addition, dust, construction trash will affect it.
• Additional load on the walls. Although the tree and weighs less concrete, it does not have its own support. In addition, in the bearing walls will have to install special mortgage elements, which will reduce their strength characteristics.
• Fire hazard.

In addition, a tree like rodent and insects like a tree. If the room is badly ventilated, then mold and fungus starts.

Wooden Stairs Installation Features

In short, it starts all with the compilation of a detailed drawing. After that, the steps that are connected to two growths are cut. Next, the bars are installed that these steps must support.

Although the tree does not need additional finish, it is better to paint it. To do this, it is necessary to pre-level the surface. If necessary, a special putty for wood is used. When the putty layer is dry, it is necessary to span the surfaces well. It is done in two stages.

At first work is performed using coarse sandpaper, then more delicate processing is performed. The greater the surface will be, the better the entire staircase will look, so much attention is paid to this stage.

After that, the tree is impregnated with the compositions that will help protect it from insects, fungus and mold. At the next stage, the surface of the stairs is desirable to be covered with a primary composition (selected in accordance with finite color).

Useful! The paint for the wooden staircase is also the desired special. You need to buy alkyd or urethane type compositions.

If you paint the staircase, there is no desire and you want to keep the beautiful structure of the tree, then emphasize it and protect the material from the external influence with the help of a veil.

In custody

The quality of the stairs directly depends on the master who made it. It often happens so that it is even started to creak concrete stairs. For example, if the steps turned out to be uneven, and a tree is used as a finishing material, such products are guaranteed to be labeled.