Nowadays, many people seek to be atmosphere of comfort and beauty in their house. As a rule, we do it with different ideasHelp us to make the design of the house in a certain style. We also try to decorate their interior with various elements of the decor, bringing some mysteriousness and originality into it.

In this article we will focus on such an important detail of the interior, such as the lampshade made by their own hands. If your favorite lampshade is completely worn out, it can always be reappeted, thereby breathing into it new life. It can also be made independently for a lamp, night light, ceiling or floor light source.

Benefits

Two hundred years ago, the first lampshades were created. Such an interesting name came to us from French and in translation means "muffled light". As a rule, they were made of leather, wood, or fabric, but were especially popular and trendy in those days were lampshades of multi-colored glass and crystal.

You can also use any materials you like when making this beautiful and exquisite decor element for your lamp.

In order to reorganize the lamp to the lamp themselves, it is necessary to pick it up with a not too complex design, so for this you will be suitable for the simplest floor lamps and night lights. They can be both outdoor and suspended. After all, the intervention in their simple mechanism from the vertical base and a round frame will not be a big problem for you.

Usually, such lamps are very easy to choose the details or replace them with a frame of a wire, whether the wood is metal. The main thing is that the lamp with the lampshane holds very hard on his design. At the same time, the lamp with lampshade will never be damaged and will not fall, and you can safely transfer it to any place convenient for you.

Master classes with description

Maschery or decorate lamps with lamps with lampsharis is a creative and interesting occupation, while very fruitful: it gives the opportunity not only to make a unique element of the decor, and in full compliance with the style of the room, but also helps to save money. You just need to purchase the most uncomplicated lamp or night light for a little money and decorate it for every taste. This will help you with various manufacturers and materials.

At home you can create lampshades for every taste. To do this you need Any good night light, lamp or floor lamp, as well as frame and base for them.The lamp should be a LED or energy saving so that neither the material from which your lamp shade will be made. Making such a piece of decor, you must carefully comply with all safety standards, because work with electricity can carry a potential threat to fire or shock.

Try not to use materials that can easily ignite and having toxic compositionnot to harm yourself and others. The frame of any form can also be made independently from the wire or purchase ready in advance.

As items for finishing the lamp, you can use the most extraordinary things, ranging from children's toys and finishing building materials or plastic and paper items.

From wood

The most durable and moisture resistant are considered wooden lampshadeswho will serve for a long time and at the same time will fit into any interior in classic or modern style. But usually they have a greater relevance for a bath or sauna. For the manufacture of such a lamp from a tree with their own hands you will need a roll of paper, a simple pencil, wood and self-tapping screws.

Using these materials, you can make an angular lamp:

• To do this, draw a frame layout in the form of a trapezoid. Please note that the side details must match the wall to which the lamp will be attached.
• Next, take the wood and apply the mockup pattern on it and cut it out. You can handle wood with paint or varnish. Of the three wooden planks, one centimeter width and a centimeter thickness thickness make a frame.
• Combine the top and bottom of this frame on the sides and in the center. Measure the distance from the middle to the edges and cut out a few more slats of this size. The planks must be made in self-drawing from the inside.

• You can also make a lamp from the vine or dry branches. To reap the lamp of dry branches with your own hands, you will need sprigs of various sizes, a lamp, a base for lampshar, glue, paint, tassels.
• Before gluing the branches on the base, polish it with sandpaper, then wipe with alcohol. So the branches will be baptized. Next, take the branches and stick them in a different order to the base in a circle.
• After a complete drying of the lampshar, attach it to the lamp.
• So that the lamp looks bright and modern, paint the sprigs of silver or golden acrylic paint. Combining these shades, your lampshade will be in a nordic style and will decorate any interior.
• You can also add various decorative elements in the form of cones, chestnuts, feathers, artificial leaves, beads or sequins.

Weaving from the vine and branches never lost its relevance, and if there is a desire to please yourself, as well as create interesting home decor items, then it can be done independently, only having studied the sequence and rules for working with such material as a vine.

For labeling lampshar or various items you can use branches of all varieties and you. It should be done in the spring before the first shoots will appear on the branches, so that the product will be high-quality and has served for a long time. Excellent material will become excellent willow Breaks, Straws and Cameswhich are also harvested in advance. As a rule, it happens in the autumn time of the year. And for a solid base of products, the branches are suitable walnut and willow.

Ponds for the product You can pick up a different size and make tapes for decoration. You can still change the color of the product, holding it for some time in the water. This will give him a more refined appearance.

From paper

The advantage of such material, as paper, is its availability and ease of manufacturing products of any forms. A lampshade made from newspaper tubes is one of the most popular and creative ways. For weaving such a lamp lamp, newspapers or magazines, a bottle, scissors, glue, disc, paint or varnish are needed.

Operating procedure:

• The tubes are harvested in advance by folding and gluing, it is also necessary to dry them well.
• Next, we cross three tubes, put the bottle and weave on the spirals. Thus, the lamp shade is expanding by overlaying the tubes on each other. Thus, we achieve a certain size, glue and cut off the unnecessary tubes. After that you need to paint the lampshade and cover with varnish.

It will be very easy to make paper a lampshade with butterflies. You can also use various fakes in the Origami technique.

The frame of the lamp is taken as the basis of the lampshar. Next, cut out a large number of Butterflies on the template and fix on the frame with a transparent fishing line or white thread. Such a product will look very original and fit well into the child's room.

Any elements of the decor will rise to decorate the lampsher. Consider several useful ideas To decorate such lamps. To add some brightness, get several butterflies in the stationery store or make them yourself. Next attach it to your lamp to your lamp. Such an idea of \u200b\u200bthe decoration of the lighting device will have to taste with any child or adolescence.

An even more original idea is to decorate the lamp with special aromatic bags, which contains dried herbs and essential oils. This will create you a romantic and cozy atmosphere in the room or bedroom.

A pleasant aroma of herbs and colors will always be present next to you.

If you are interested in collecting herbarium from flowers and leaves and decided to use them to decorate the lampshar, then you definitely not be mistaken, creating such unusual element Decor. You just need to stick them to the finished lamp and give a dry glue. So you will succeed rustic style lampshadewhich will decorate any interior in the country or in the house.

Abazhur of wallpaper It will be an excellent idea. Its creation does not require high costs and effort. Consider the best interesting optionMade in the form of a harmonica. This will require the frame of the lamp and wallpaper. On the required cutting of wallpaper, draw the stripes, the distance between which will be at least two centimeters. Then fold the wallpaper in the form of the harmonica and make holes on the top of the segment. Then you need to turn the lace to secure and glue the design.

Another idea of \u200b\u200bcreating lampshar - from the napkin. To do this, you need to have glue, openwork knitted napkins and an air ball. Next, we take the napkins and wash the glue, put them on the balloon and wait for complete drying. The ball can be pierced or lower, and to attach a light bulb to the obtained lamp.

Napkins can also be paper. Cut them on the equal parts, wake the lamp glue and stick to its surface. To the lower or top of the lamp, you can attach a ribbon or braid, which will give it a more vintage appearance.

From girlfriend materials

For the manufacture of lampshar made of primary materials, it is initially necessary to decide from which means it will be made, and it is also necessary to have a frame for a lamp. This basis can serve an air ball or a ball.

Another option for creating a lamp shade is the usual five-liter plastic bottle. To do this, you will need to cut the top of the bottle and paint it from the inside of any bright paint, and outside the blue or green. To the edges of the bottle looked more neat, take a teip tape on them under the color of your lampshar.

Do it yourself you can do Abazhur of plastic cups. To do this, you will need a stapler, wire, a wooden base and a cartridge with a lamp. Next, the glasses are fastened in a circle, and the cartridge with a lamp and a design of cups is attached to the wooden base.

Such an original and practical lampshade will serve as a decent addition to your interior.

Any healthy material can be used in labeling. Cocktail tubes are no exception. To do this, it is necessary to prepare about two hundred straws, which, with the help of the construction glue, glit on the glass base of the lamp. And from finely chopped multicolored tubes you can make a small night light in the form of a cube.

The easiest decoration solution is to glue cocktail tubes vertically, so that the old lamp becomes even brighter and beautiful.

Will not make a lot of work to make abazhur of simple evincible wire and beads. To do this, it will be needed pliers and pliers to give a variety of forms. It may be curls, leaflets, hearts, circles and patterns. Such simple design will look very original. You can also make the basis of the wire and pull the cloth or the skin on it.

A lampshade of cardboard do it yourself very simple in the manufacture and will be different unusual speciesThis will find a place in any room. To do this, you will need to cut four frames from durable cardboard and attach to them from the back of the lace to them. For this, not only ordinary threads, but also various ribbons or tapes can be used.

Thus, you will have a flashlight, which additionally needs to be glued with glue. After that, you can paint this unusual lampshade in any color and install on the lamp.

Cork or self-adhesive paper can also be perfectly suitable in the manufacture of lampshar. To start on old lamp Apply the paint of silver color, then plunder it with cork paper. On top of them rush sprigs of different sizes. And if you have a felt, then you can sew from it a new lampshade. To begin with, make a pattern for the base of the lamp, sew its parts and pull on the base. Decorate various applications.

From thread

The most eco-friendly option for your home will be a lampshade made from the twine or the twine with their own hands.To work, you will need a thread of two different colors or varieties, a needle, a balloon, glue and a cup. In order for the thread to be impregnated with glue, it must be done through a glass with glue or a jacket with glue. You can do this with a needle.

Next, take the ball and draw a circle on it for the opening for the light bulb, while winding the ball so as not to hurt this circle. After that, we leave the ball for a while so that the glue is good as the design and the design is not deformed when the air is lowered from the ball. Next, insert the cartridge from the old lamp and the resulting product to the ceiling into the hole.

Another unusual way Decorate the lampshade - it tie it crochet. To do this, you will need the basis for lampshar, yarn, knitting hook, glue. According to the knitting scheme, you associate two openwork products of the required size and completely enjoy the lamp shale. Patterns can be diverse.

To give a smooth type of product, apply a mixture of water and glue, diluted in equal proportions. During drying, you can give to the lamp by any form. Next, install it on the flooring or lamp.

And in order to make a brazed lamp shade with their own hands, take the frame from the old lamp in retro style. This element will make an unusual your interior and emphasize his dignity. For the manufacture you will need threads, glue and sprayer. Wipe the basis of the lampshar arbitrary and uncomplicated movements.

Watch the threads are tightly wrapped. After that, divert glue with water and splash from the sprayer to the threads so that after drying, they kept a certain form.

Manufacture laundier from Juta It will be an excellent ideas for those who want to decorate their home. To do this, you will need a jute thread, glue, wire, decorative leaves. First you need to make a lamp template that will match the lamp frame. We screw screws or carnations to the finished template. Then, by contour of the layout, we stretch the thread and drag it vertically throughout the contour. Next, we make a weaving horizontally and process glue.

Immediately after drying, remove the product from the layout and glue the side parts. In order to decorate the lampshade, take decorative leaves of ivy and secure wire to the base of the lamp. Such a lamp will create an atmosphere of fabulousness in your home.

From fabric

First you need to pick up a lamp fabric for lading. It may be tissue of any density and rigidity. The choice of material will depend on what the frame of the lamp is made, but preference is worth paying dark tissues, and not transparent, as it will be more practical.

In order for the color of the emitted light to be cold, use the tissue of blue or green shades, and for cold light, pick up yellow shades or red.

If the base for the lamp is made of wire, it is necessary to apply the paint or wind the tape so that the fabric does not deteriorate with time. Sew the product can be manually or on sewing machine. You will also need iron, pencil, centimeter, threads and glue.

First you need to remove the measurements and cut the template that will approach the lamp shade. Next, cut the pattern by the template and pick up the thread to the fabric. On the sewing machine we shoot the details and then smoothed them with an iron. The next step will be gluing the product to the base of the lamp. It takes carefully to hide the seams, tightly tightening the frame. Ready lampshade sufficiently dry and wear on your lamp.

Cozy evenings with a book in the beloved chair, spiritual tea drinking with homemade kitchen, romantic dates with loved ones ... and above all this is a familiar, familiar, traditional lamps for desktop lamps, a wall lamp or a lamp standing on the floor.

Beautiful lampshades made by their own hands become notable and indispensable interior items. They contribute to the daily life of romance notes and fill the homely atmosphere with warmth and beauty.

Fabric, paper, beads can be material for making lamp lamp. Showing fantasy and patience, you can transform an old lamp lamp for lamps to be unrecognizable. Such an exclusive element will make the interior individual and truly homely.

Master class on making lamp lamp with their own hands

Popular material from which the lampshade do with their own hands is a fabric. Flax, silk, jeans, organza - any option.

Suitable a whole piece or strips of matter. You can simply cover the frame with a stinging cloth, make a one-photon with relief colors from the same matter.

It is important to understand in advance where your lampshade will "live". A romantic surroundment requires the corresponding "companion", strict minimalism - the other.

Council of the specialist: as the basis for the lamp, you can take a frame from the old lamp. Make it out of hard wire yourself is also easy. And the lamps should choose an energy-saving type - so that the fabric does not catch up.

How to make a beautiful lampshade with your own hands?

You can make an edging from the bound ribbon or from Ryush.

Lamps lamp lamp and fabric

The second homemade lampshade is also performed from the fabric. You can make it on the basis of the old lampshar. And you can transform so typical product purchased in the store:

Shade lamp with their own hands. Photo

- The first step is to measure the circles of the upper and lower rings, as well as the height of the frame;
- add two centimeters from each edge to the resulting sizes so that the seams can be performed;

Shade lamp with their own hands. Master Class

- We take a sheet of thin plastic and cut out a rectangle or a trapezium from it - the basis on which the homemade lampshade will be held;

How to make lampshade with your own hands. Step by step photos

- cut out the fabric in size, with the help of the scotch of the painted gluing it to the table;

- glue matter on plastic;

Master class - lampshade with their own hands. Photo

- we enhance the resulting detail of the lamp shade and tighten its edge with the help of clamps;

- We celebrate the place on the fabric where the seam will be;

- we remove the clips and glue the glue line on the planned line; We press the joint with something heavy and let it dry;

Homemade lamp lamp. Photo

- Then we turn the lamp shade with your own hands and also glue inside;

- Now you can smoke the combination of the housing with rings;

- when everything is well fixed, we remove the clips;

- decorate the bottom and top of the lamp by paper using paper tape; We glue it so that one edge goes beyond the rings;

- free edges bend inside the case and glit;

- the strip of the tissue of another color length to the height of the lamp is laid and the width of five centimeters fold in half, bending the edges inside, stroit;

- we apply glue to the inner surface of the tape and glue;

Shade do it yourself. Step by step photos

- we stick the strip on the seam on the lamp;
- Cut two tapes from paper of the same width as the finished strip for the seam; Then glue it to the upper and lower edge of the lampshar; fix the clamps; On top of a paper we glue the band from the fabric.
Homemade lampshade ready.

The ideas of making lampshar do it with a photo

Such a "floral" lampshade will perfectly complement the romantic interior.

A little fantasy - and a bouquet with motley robes is ready.

Gentle tones create a romantic mood.

"Oracle" from white roses is an excellent addition of strict simple design.

This wonderful lampshade brings down the memories of grandmother's napkins.

Here are the origami style lamps will look good in a minimalist interior.

Another representative of the ancient Japanese art creation of masterpieces from paper.

Salad-blue smears perfectly fit into the design of green tones.

Beautiful lampshade outcard or castle pictures

It turns out a beautiful and original lampshade. We will need a picture with locks, scissors, tape, cutter and a small lamp (lamp).

It happens that so you want to update the interior, but it is not known where to start. Sometimes you just need to change the lighting. But buying a new lamp costly, and in some cases it is not even required. We invite you to consider several master classes on how to update the downtown

What you need to create lamps

Update lampshades for their own hands can be absolutely any materials:

• cloth;
• artificial colors;
• skin;
• threads and rope;
• paper and so on.

Also be sure to have such tools such as scissors and a glue gun.

Simple and original way to decorate the old lamp

Such lamps are very well suited for the female interior in the style of chic. To give the lamp to the lamp, take such materials:

• shade;
• artificial flowers (color browsing can be bought in stores for creativity, but you can buy bouquets and cut off the caps from them, sometimes it turns out cheaper);
• glue pistol;
• scissors.

Master class how to update lampshade for desktop lamp do it yourself:

1. Cut from the colors extra pieces of the stem, leaving only a cup that connects the petals.
2. Heat the adhesive gun.
3. Apply a little hot glue to a cup of one bloomer and stick it to the lampshar. Start working from the upper or lower edge. Flowers glue either in a circle or in the rows, tightly pressing them together.
4. Hot glue dries quickly, so work carefully.
5. When you attach the entire lampshade, flourishing the flower petals.

Tip: Interesting lamps for desktop lamps are obtained with a combination of several colors that smoothly flow.

Geographical lampshane

Such a lamp will look great both in the living room and in the child's room.

You will need:

• shade;
• map;
• tape;
• pVA glue;
• some water;
• brush;
• adhesive pistol.

Master class, how to make geographic lamps for desktop lamps with their own hands:

1. Prepare a map. It can be bought in the store, print either it can be special sheets for decoupage.
2. Mark the required width on the map and cut the rectangle. If you are not enough for you to completely wrap around the lampsier, add another piece.
3. Divide in a small amount of water.
4. Cover the map on the reverse side by glue and gently stick it to the lamp. To the fingers, smooth the pummers, if such appear.
5. Wait for complete card drying.
6. Cut extra pieces of paper.
7. Preheat and with it take the tape along the edge of the lampshade at the top and bottom.

Geographic lampshade ready!

Books Sheets like decor

Similarly, as in the previous mater class, you can decorate lampshades for using bookpasics.

To do this, shoot a few sheets from the old book and hang their edges so that they are not shabby. Lubricate each sheet with PVA glue and glue it to the lampshade in chaotic order. At the edges, paper should perform a little. When all sheets are pasted, overpower the edges inside.

Warm shameter with the effect of ombre

Such a lamp is ideal for the cold season, as it will make a height of heat and comfort to any interior.

List of what you need:

• shade;
• several types of yarn suitable for each other in color palette (for example, white, dark blue and turquoise);
• adhesive pistol.

Master class, how to make a beautiful lamp lamp with your own hands:

1. Put a small drop of glue just above the base of the lamp to the lamp (approximately at a distance of one centimeter from the edge).
2. Stick to a drop of one end of yarn. Choose the one in which the shade is darker.
3. Wipe the lampshade yarn, trying to make each new row firmly faced the previous one.
4. Mix a certain height in one color. The last turns should not firmly fit together, and be at different distances, a little chaotically cover the lampshade (picture 1).
5. Stick with an adhesive gun yarn another shade. The new color must be on the level of the old (picture 2).
6. Wash the yarn around the lampshar, while you will have to prevent two colors in some rows. It is necessary that the shades have a smooth transition and the striped pattern did not come out.
7. When you wrap the required level of the second color yarn, make several free turns (picture 3).
8. Mix the third color of the yarn, not forgetting to glue the tip.
9. Complete the amusing of the lamp. For this, the third yarn should go dense rows to the edge of the lampshar, and the end is sharpening (picture 4).
10. Turn over the lampshade and domidate yarn to the end.

Warm abazhur ready!

Shades with roses

You will need to take such tools and materials:

• shade;
• cardboard;
• pieces of fabric;
• green yarn;
• tape;
• glue pistol;
• scissors;
• pencil.

Master class, how to decorate the lamp shade for a table lamp with your own hands (the photo of the process is attached):

1. Draw on the cardboard floral leaves, and then cut them out (picture 1).
2. Stick to the edge of green yarn with a glue gun (picture 2).
3. Motion tightly yarn around the leaflet (picture 3).
4. Stick the tip's tip and make a few more leaves (picture 4).
5. Cut from the fabric several strokes with a thickness of about one or two centimeters (picture 4).
6. Fold one strip in half, drunk a little glue inward over the entire length (picture 5).
7. Tightly twist the strip, sometimes dripping glue to the edge so that it does not comply with (pictures 6 and 7).
8. Roll into a little edge of the figure, and you will have a rose (picture 8).
9. Make a few roses, different in size.
10. Gently stick roses at the lampshade (picture 9).
11. Do not forget to rinses in some places leaflets.

Volumetric lampshade ready!

New ombushur with the Effect of Ombre

To make a smooth and beautiful transition of one color to another, a suitable coating is necessary. To do this, it is recommended to make lampshade with your own hands.
You will need:

• lamp shade;
• cotton monophonic fabric (preferably white, beige or light gray);
• little bath or basque;
• paint (watercolor, for hair, for fabric, gouache and any other liquid);
• adhesive pistol.

Master class, how to make a lamp lamp lamp with your own hands with my ouston effect:

1. Take the lampshade frame and fabric.
2. Turn on the adhesive gun.
3. Wrap around the lampshar cloth and gently glue the edges. Excess the cloth cut off.
4. Top and lower edges Wrap inside the lampshar and glue them with a glue gun.
5. Fill the basin or bath with half water and dig paint in it.
6. Lower the lampshade not completely in the bath and pull it out from there.
7. Do this procedure several times, gradually reducing the height of the dipping. Thus, the paint will be absorbed again at different levels, creating a smooth transition of shades of one color.
8. Hang up lampshade in the bathroom and let him dry.

All is ready!

How to make label from scratch

In the previous master class, it is told how to upgrade the boring or outdated lampshade. And what to do if nothing to work with and not even framework? Then you can easily make the lamp shade personally.

For this you need to take:

• the cloth;
• malyary Scotch;
• large line and centimeter;
• pencil;
• scissors;
• plastic sheet (can be found in construction stores or among the goods for needlework);
• wire rings;
• large clips-clothespins;
• pVA glue or;
• glue pistol;
• special splitter for lamps (sold in lamp stores).

Operating procedure

Master class how to make a new lamp lamp with your own hands:

1. Take a centimeter and measure the diameter of your wire rings. It will be the diameter of the lampshar.
2. Put the plastic sheet on the table and measure the length and width of the future lamp
3. Cut the placed rectangle.
4. Expand fabric on the table with an invalid side.
5. Secure the edge of the cloth so that it does not move.
6. Cover the plastic rectangle layer of PVA or bilateral tape.
7. Gently attach a rectangle sticky side to the fabric.
8. Press the fabric to the sheet and roll it up.
9. Cut excess fabric.
10. Twist the cloth.
11. Spread the cloth with a glue gun.
12. Connect storage with closures and put the item on the table.
13. From above on the seam, put the load so that it does not worry.
14. Wait dried the part.
15. Place inside the details on top and bottom over the ring.
16. To the top ring, attach a special splitter.
17. Enclose rings with a glue gun.
18. At the edges, pin the clips-clothespins so that the rings are better glued. Leave the detail for a while.
19. Stick to the top and bottom of the lamp tool tape, half of which wrap inside.
20. Cut the strip of fabric, turn it out and stick to the seam.
21. Cut two more fabric strips, also turn the edge and glue them to the top and bottom of the lamp.
22. Wait until all the elements are dried.

Brand new absentee is ready!

The lamp lamp lamp, chandeliers or lamps were created to muffle the light of the lamp. However, this accessory may eventually wear out, losing aesthetic appearance. In this regard, many owners have a dilemma, throw away the working lamp or try to renovate the lampshade using the old frame. There are many ways to correct the situation by showing a little imagination.

Decor of lampshar with flowers

Original lampshar decor

The idea of \u200b\u200bdecorating lampshar

Handmade products today are very popular. Create a new lampshade for chandelier or landscaner can be from any girlfriend or purchase some components in the store for needlework. The simplest I. affordable materials For creativity - paper, plastic, thread or cloth. You can also create original decoration For lamps of old disks, natural materials - grape vines, seashells, stones or broken glass. Original, tissue lampshades of jeans, burlap, linen ribbons look original. As additional decor elements, beads, buttons, satin or reps tapes can be used. This article contains interesting and unusual master classes on the independent design of the lamp from different materials.

Below is a table where some types of chandeliers made by their own hands are shown, and what materials are needed for their manufacture.

View of the lamp	Main materials	Short description	Degree of complexity
Teter chastley	Empty Tetra Packages	From the empty TETRA PAK packages, strips of 21 mm and 19 mm are cut out, of which hexagons and pentagons are made. Collecting lamp using Origami equipment
Wire chandeliers	Stainless Knitting Steel and copper wire	The easiest way is to wind the wire template for the lamp in the form of a spiral. It can be a bucket or flower pot.
Plastic plastic dishes	Empty plastic bottle of 5 liters Disposable plastic spoons Thermopystole	The bottom on the bottle is cut off. The spoons are laid down with cuttings, and the main parts are glued to the bottle, imitating fish scales. To do this, use a thermopystole. If you wish a spoon, you can paint acrylic or aerosol paint.
Disk lamp	Laser disks Wooden round base with a diameter of a little more disk 3 Metal racks Long luminescent lamp	A hole for a starter with a switch is drilled in a wooden basis and a lamp is mounted. It is also necessary to install metal racks to be driven. Holes are drilled on the disks, and then ride them.
Chandelier from hangers	Wooden shoulders 2 Metal Round Basics of Different Diameter	A smaller base will serve as the upper part of the chandelier. Handers are attached to both bases with different angles vertically, forming a trapezoidal shape of the lampshar.

Lamp decoration with ribbons and beads

Decor of lampshar with flowers

Original lampshar decor

The idea of \u200b\u200bdecorating lampshar

Decoration of amusing accessories

Ideas and their embodiment

Create paper lamp shade is the easiest and most affordable way. The shortcoming of it is the briefness of the material. For a longer service life, such chandeliers can be used cardboard. Below are some examples of making a lampshar using paper.

Plafond Mobility

For the manufacture of such decoration, the following materials will be needed:

• PVA glue;
• Scissors;
• Thread (it is better to use a kapron thread, it is much stronger than normal);
• Beads;
• Colored paper;
• Plastic or wooden round base (diameter is selected individually).

The essence of the creation of the lampshar consists of rolling out various decorative elements on the thread and fastening it to the base. To do this, it is necessary to cut different parts from the colored paper. They may have the shape of butterfly, hearts, birds, animals, ballerinas. These parts are fastened with the help of glue, and several beads of different diameters are rolled between them. To create a bulk element, for example, a heart, you need to take 3 identical billets and glue them with each other.

Lamp decoration with ribbons and beads

Decor of lampshar with flowers

Original lampshar decor

The idea of \u200b\u200bdecorating lampshar

Decoration of amusing accessories

Chandelier from butterflies

Materials required for work:

• Scissors or stationery knife;
• Single cardboard;
• Glue pistol;
• Wire;
• Leske or thin twine.

If you do not have a thermal system, you can use silicone rods for it. You can melt them over the usual candle.

Wire is needed to create a flange frame chandelier. To do this, take a piece of wire and roll it into a circle, fixing the ends of the pliers or the round-rolls. The fishing line will perform a suspended element. It should be cut on 3 of the same piece, the length of which depends on the desired height of the fastening of the lamp. The fishing line must be attached to a wire based on the same distance from each other.

Lamp decoration with ribbons and beads

Decor of lampshar with flowers

Original lampshar decor

The idea of \u200b\u200bdecorating lampshar

Decoration of amusing accessories

Next, on a piece of cardboard, you need to draw and carefully cut butterflies of various sizes. The lower part of the ceiling can be treated with curly scissors. The cardboard itself turns into a cone-shaped form, and the joke is sick or attached with a stapler. Its upper part is attached to the frame. Those butterflies that were cut out can be driven on additional slices of the fishing line, alternating them with various beads, and fasten inside the slap. After switching on such a lamp on the walls, images of flutter butterflies will appear.

Another simple design idea is the creation of a chandelier of thick threads or yarn. From materials for such handmade will be needed:

• Tangle with threads;
• Balloon;
• Children's cream;
• Glue PVA.

Lamp decoration with ribbons and beads

Decor of lampshar with flowers

Original lampshar decor

The idea of \u200b\u200bdecorating lampshar

Decoration of amusing accessories

Initially, it is necessary to inflate the ball to the most round shape and lubricate it with a thin layer of the children's cream. This is done so that the threads do not stick to the rubber surface of the ball. Next thread is wetted in the glue and winding around the ball. Winding is made throughout the surface balloon, leaving a small part in order to later put it on the basis of the lamp. After the thread is completely dry, you can blunt or burst the ball, and in your hands there will be an original round lamp shade from the threads.

More detailed and visual execution of the lampshar for chandeliers can be viewed in the Master Class video.

Video: lamp décor do it yourself

Table lamp do it yourself - one of the most available methods Decorate the interior and give it an individuality. As soon as the designers of the pro and lovers are not thrown over them! The reason is simple: in relation to the functionality and capabilities of creative expression to the required costs of materials, labor and skills, the desktop lamp firmly holds in the top of the leaders among household items. In this article and we will see what you can do with it, it is not particularly straining or a hand or a wallet. Only fiction.

What to do?

Rate bearing lamps (pos. 1 on the next. Fig.) Light the working area that does not require the operational movement of the light spot on the table surface: dressing table, writing desk. Capabilities decorative decoration In this case, the greatest. Technically, the design of the desk lamp on the rack is most simple. The possibilities of operational adjustment of the illuminated zone are practically absent. Light adjustment working area It is possible if there is a thyristor voltage regulator in the lamp, but the spectrum of the emitted light changes significantly.

The vast advantage of racking desktop lamps is the possibility of obtaining relatively simple funds t. Naz. Cosneiss-square focus diagram (DN) illuminator, see also at the end. The costerans-square DN provides within a certain angle of the function of the uniform illumination of the working area (see Fig. Right), which dramatically reduces fatigue from intense intellectual labor.

Lamps on a leaving hinge bracket (pos. 2) are more suitable for technical creativity. The lamps on the bracket-pantographer at home are impractical and technologically complex, and make a lamp on a flexible bracket at home will cost more than buying ready.

Desktop lamp design on a broken bracket is limited by concise-utilitarian forms. The design is more complicated than the lamp on the rack primarily due to the requirements of electrical safety, see below. The possibilities of operational adjustment of light in the working area are wide and largely illuminated by the area, and in its illumination with a constant spectrum.

Console table lamps (pos. 3) in everyday life are less common, because For stability require a heavy base and, most often, a counterweight, which complicates and increases the cost of construction. The possibilities of operational adjustment of light in the working area in the console lamps are less than that of the lamps on the brackets, however, it is possible to obtain a squa-square DN.

Desktop lamps without elevation of the light source over the support surface are no longer table lamps, but night lights (pos. 4). The principal difference between those and others is that the working area with certain requirements for the light in it is not available. Accordingly, the light from the night light can be anyhow, if only health does not harm.

Design

In the desktop lamp of any type you can highlight the trail. Design elements:

• Electromechanical - Provides the stability of the lamp and a safe supply of power to the cartridge of the lamp.
• The reference - supports the illuminator or reflector and, possibly, allows you to change its position.
• Illuminator - an electric bulb in the lampshar or reflector.

The electromechanics in the design of the desk lamp the role plays only inspired, because it is possible to be stubbing into the support of the illuminator. Designer delights come on support and illuminator. In the rack lamps, as a rule, the main aesthetic load is barbered, and the rack complements it; In the hinge - on the contrary. But exceptions from this rule is complete.

Electromechanics

The board lamp electrochem is simple: network plug, cable, switch, bulb cartridge. Sometimes the voltage regulator is added. Suspended cartridge lamp E27 (under the base of the lamp of the usual width, pos. 1 in fig.) It is possible to mount only on a threaded shank M10 or M12. The cartridge for a narrow base-minion E14 is also attached to the thread or on the lamella in the form of a steel strip; The nest under it is shown a green arrow on the pos. 2. For the desktop lamp, chandral cartridges are best suited (pos. 3) with precipitated threaded flanges: between them you can hold the steel tablet with the lampshar frame or the clamp for fastening on the hinge. Drawings of the chandelier electric cartridge E27 of different modifications are given on the pos. four.

Make a desk lamp is necessary to ensure its electrical safety. This is especially true for lamps on hinges and console. Safety of the desktop lamp is simple enough:

1. The cable must be taking round in double isolation.
2. Conductive cable veins are flexible, from many wires. The cross section lived from 0.35 square meters. mm.
3. Cable Wiring Places Through Conducting or Capable Design Details should be protected by sufficiently strong flexible dielectric sleeves, cuffs or knee.
4. The cable inside the lamp design should not be stretched.

The scheme of the mechanical part of the support with a prift of the homemade racking lamp is shown in Fig.:

The cable from the inside before entering (is highlighted in color) is tied by a nodule or pull through the holes of the dielectric locking washer, so that, pulling it outside, the cable could not be cut inside. Decorative finish from polymer clay (plastics, cold porcelain) on a chipped brawl plastic bottle - Optimal option at home, but, of course, only one of many. Want, for example, to sharpen the decorative shell of the rack from the tree - please only on the mechanics of the village as it should. However, polymer clay as material for the desk lamp allows you to implement the most original ideas Its decor and fully satisfies safety requirements: dried polymer clay - mechanically durable not wetting non-flammable dielectric.

Original supports

It is not necessary to burn a fairly complex and requiring turning work, if its lamp lamp is lightweight, for example. From the threads (see below) or thin rigid plastic, and put the light regulator in the support, etc. Electronics is not assumed. In this case, a sufficiently stable lamp support is obtained from "Puzza" glass bottle With a wide bottom, pos. 1 in fig. A narrow bottle can be pulled out by sketching the pebbles in it (pos. 2), steel balls, etc. The cash holder is fixed on the neck with a regular threaded cork or a piece of solid expand solid foam, protested along the threads of the throat.

The hole for the cable in the bottle is drilled by a tubular thin-walled diamond drill. But the glass is not at all the fact that the tile, so it is necessary to drill it:

• The bottle is put on the side and securely fix.
• Around the future holes are pushed out of plasticine height 2-3 cm.
• Water poured into the resulting hole.
• Drilled under a water layer at least 2500 rpm with a gentle and smooth feed.

As a bottle from the whiskey "Jack Daniels", a table lamp is made, see the video below:

Video: Bottle Table Lamp do it yourself

Such a lamp will organically fit into, steampunk and other technogenic-utilitarian. Just do not make a mistake, do not try to make it lampshade from flower pot or any other dishes. Technogenic-utilitarian styles are not a meaningless journey of the hob, their concepts are clearly thought out. The elements of the interior for them should be related to industrial, not agricultural or food production. Lampshade, for example, need a tin reflector from an old production attachment on a pantograph, automotive headlamp, a small spotlight, etc.

In fig. On the right shows another very original version of the "real big" table lamp of ... Rope! It is done in this way:

1. The rope take natural organic overlap 6 + 1, i.e. 1 strand along the axis and 6 around the circle;
2. The segment of the rope is stretched with hands and weakens, turning simultaneously in different directions against the direction of the obsession of strands;
3. The axial strand is neatly pulled out and insert instead of a thin-walled copper tube with a fishing fishing line for a cable tightening;
4. The rope with the tube inside is tightened by turning his hands in the direction of the obsession;
5. The ends of the rope are firmly fixed on the tube with a winding with a cord;
6. Tighten the cable into the tube;
7. Bottling and knit knot. You need to bend little, carefully so that the tube does not adversely;
8. The rope is once again tightened, selecting the seed strands, and soak acrylic varnish.

Note: The tube must be taken for air conditioning systems, from oxygen-free copper. The red-walled gas or electrical tube in the node will certainly admire.

Features of the hinge

The mechanical part of the desk lamp on the hinge bracket is more complicated. The lamp shown on the left in fig., Does not comply with the requirements of electro- and fire safety: the cable is clamped in combustible parts and with the manipulation with the illuminator can be pulled out. Its hanging down the loop can be coated with hand or sharp item.

The cable to the bulb cartridge in a desk lamp on a hinge bracket should be carried out according to dielectric non-heat knees or between the sidewalls of his links, or if the hinge is solid, on its top, in the center and right in Fig. In this case, the cable on the link of the hinge must be consolidated. If the links of the hinge tubular, the cable is paired inside them. In any case, ω-shaped cable loops with a diameter of 60 mm, but not less than 12 diameters of the cable make over the fuses of the hinge. At the transition of the cable from the bracket to the illuminator ω-loop, they are made from 90 mm, but not less than 20 diameters of the cable.

The balance of the desk lamp on the joint changes wide limits and ensure its sustainability is quite difficult. Producers, because of this, sometimes invent such systems, which is easier than a flashlight shine than setting up the light from a soul miracle, see fig. left. Therefore, desktop lamps on hinges are often supplied with screw clips.

As a screw clamp for fastening a homemade table lamp to a tabletop, a small joinery of the clamp is perfectly suitable, see fig. on right. Better clips for a lamp from a furniture store: It is cheaper, keeps more reliable. Capturing clamps is wider, and the lamp can be attached to a tabletop by any imaginable and unthinkable thickness. It is necessary to ask for a joiner, because Sponges of fitter clamps without a soft coating.

In the lamp holder, the clamp is converted by a socket from the steel tube with a diameter of on from 10 mm and a length of 120-150 mm. In the tube approx. Half lengths make longitudinal cutting width in the thickness of the clamp of the clamp. The nest is attached to the clamp through bolts. The nest is tight, but not tight, insert a steel pin with an eye, which is a fixed link of the lower hinge bracket lamp. Well here are suitable hooks for pendant chandeliers with a curved end in the ring; The carving on prevents them in a smoothly rotate in the nest.

Adapting the clamp under the lamp holder, it must be remembered that its cage is made of highly carbonated steel; So it is necessary that the luminosity of the clamps can be denied under the oppression of compressible parts. High carbon steel is very hard and rather fragile, so it is necessary to drill it with a carbide drill at 800-900 rpm with a non-strong smooth feed. Kolotnoy solid objects and try to adjust the clip of the clamps can not!

Illuminator

This desk lamp node should give the right light into the working area and is often the main decorative element. Here you need to note first of all that compact, light and economical LED illuminators (see Fig.) Well shine only in 3D models. Their light of medical and sanitary requirements for local workshop is still not satisfying.

Reflectors

Illuminators of table lamps on a hinge make reflex, lampshade for them are too cumbersome and hard. The reflector must be selected parabolic, it gives a fairly concentrated and even light. A single conical reflector can be made itself, but the light from it is uneven, tiring his eyes, and much in vain "spread" to the sides. The reflectors of good hinge desktop lamps are made with a reflective surface of the 4th order of curvature (eg, in no more than 20 years of the popularity of "Hobby"), but it is unreal independently.

The output, if the appropriate reflector is not - use a krypton incandescent lamp with an internal reflector, it is also of conscientious producers of the 4th order of curvature. In this case, the manufacture of the illuminator comes down to the installation around the lunch light of any form from any sufficiently durable and light materialprotecting the lamp from random strikes.

The reflector of the reflection of the desk lamp on the hinge bracket must necessarily have up the opening or hole for the output of heated air. Fluorescent lamps - housekeeping and LEDs warm it seems to be weakly, but from staying in a heated airbag, their resource decreases sharply, and they are not cheap.

Shade

Lights of racking beam lamps are performed in the form of a light bulb under. Its appointment not only to be a fertile field for the decor, but also partially a light reflector, which ensures the desired illumination of the working zone of a given value. A downtile lamp lamp can be made hard frameless and soft on the frame. The lamp shade is made more often of the wire in the form of a truncated direct cone, on the left in fig., With simple (in the center) and complex (right) curvilinear form.

The simplest way to cover a direct conical lampshair - ribbon segments. It is time consuming, but it is good because the outer surface is obtained smoothly curved, without dome. The seams on the rims of the lampshar are masked by Ryushami (pos. 1 on the next. Fig.), Braid, fringe, etc.

Circling the fabric in the form of a sweep of a truncated cone for the covering of a conical lampshar no meaning, because As a result, the label is not a conical, and faceted, pyramidal. It will be easier to sew an amusing case from Kliniev, the patterns of which are built step by step completely without the use of geometry:

• On the frame section, the sheet of fine cardboard or dense tight paper is applied;
• Cardboard / paper is adhered to a frame with a rubber band or tape;
• The circuit of the pattern is driving from the inside, it will give the non-roll of the fabric needed for a dense tightness by her lampshar;
• Fabric take satin, sarrenchy or staple weaving;
• It is so that the filaments of the fabric bases are oriented along the longitudinal axis of the pattern.

Ready lampshade are often decorated with sockets, bows, etc. At such a case there is an interesting designer reception: The main fabric take a thin, well translucent colorful, and the outlets are spinning pale pastel tones or completely light, pos. 2. The lamp is modestly in the interior, and it is necessary to include in the dark - all is cleaned.

How to trim the lampshane

On the lamp shade with complex curvilinear ribs (with the "Waist"), a seasy case can be simply throwing and pulling tapes (pos. 3), thread, rubber band. But according to the rules of the inspection of the lamp, the cloth is done like this:

And differently?

There are other methods for making the lamp lamp lamp lamp, allowing to embody in the material a variety of original design ideas. For example, from the usual papers of paper glue-blank (pos. 1 in Fig.) And twice impregnate it with acrylic varnish. After drying, Lanolin is rubbed into the nerd several times until it stops absorbed. A covered with a lanolin, a blank is wrapped up with a thread stretched through the glue PVA, as in the manufacture of Christmas tree toys with their own hands. Device for pulling the thread through the PVA is shown in Fig. Right below. The finished hard case of lampshar with drops of glue is fixed on the frame, which can only consist of the lower rim, fastening screeds and a table cheeper under a chandelier cartridge.

On the same nerd, a hard seamless lampshade of fine synthetic fabric is made. It is wrapped with a cut out of a truncated cone (with the allowance) sweep of a truncated cone. The fabric is fixed along the edges of the paper with the clips and impregnate the acrylic varnish with a wide strip in the middle. When the lacquer dry, the clips remove and impregnate the edges outside. Paper from dried lampshar dyed. Wasters inside cut into bends in the bends are embedded in a thick fishing line and fix the glue drops.

The framework with curvilinear ribs can be spoiled by horizontally strips of fabric (pos. 3) or narrow ribbon, newspaper tubes, straw, etc. According to lighting, an ordinary propylene twine is great, but his aesthetics is ... not even that ... Finally, a soft textile case for lampshar can be sewed with a simple straight sleeve on the diameter of the lower rim, and on top of the dock, pos. four.

Very original

The following 3 variants of lamp lamp lamps are among the externally extravagant, but ensuring very good lighting indicators. What, by the way, it is impossible to say about many homemade textile lampshairs. For example, we buy (steal - sinful, as the captain of Barbosa would say from the Pirates of the Caribbean Sea)) Milk plastic ceiling for street lamp. Not so expensive, perfect light refinement with light scattering, and not beats. And below - a wide opening, through which light will be released enough for local work lighting. Outer surface Plafon decorate decoupage on a transparent basis or paint. What happens in the end - see in Fig. But this is, of course, an option for an amateur, resistant to psychedelic influences.

Plywood or males on the adhesive shade (see Fig. Fig.) Due to the internal reproduction, it has good light light and softens the light. In the table lamp you can even put lED light bulb With matte flask. The rims are the hoops for embroidery of different diameters. In the same way, you can make a desk lamp integrated with lampshade (right in Fig.) On the table, it will take a lot, but it looks original, "environmentally", and the light gives very soft, not taring.

The desktop lamp integrated with the lamp can also be made all of the same wonderful material -; In a thin layer, it is translucent. The lamp-jellyfish (see Fig. Right) Made from it. Production procedure is as follows:

Green lamp

Review the old photos with Lenin, Stalin, Churchill, Roosevelt, Theodore or Franklin Dela, Mahatma Gandhi. Or, if you want, with Hitler, Mussolini, General Tajiye, Chan Kaishi. And pay attention to their desktop lamps. True, look like the one that on the left in Fig? Which in the USSR "broad layers of the population" was not sold? And which spawned popular expression "Green lamp"?

Green Luxury Table Lamps Antique and Modern

"Green lamps" are now produced and well bought up. True, judging at prices (right in fig.) They did not become more accessible to ordinary citizens. The secret of the "green lamp" - in the lampshar of the painted in the mass of green glass, from the inside of the coated translucent (more precisely, on the 3/4 transparent) layer. The shape of the lampsier corresponds to a completely defined mathematical law. Within wide, approx. 3-diameters of the lamp lamp, the working area of \u200b\u200bthe Green Lamp DN, and then the illumination is very smoothly moving into a greenish twilight. A little raised the eyes from the papers - the eyes and mind rest.