W. good owners The house is always perfectly clean. This also applies to plumbing. But sometimes, after long-term operation and with rare preventive cleaning under the rim and on the walls of the toilet, various contaminants appear, which is very difficult to eliminate. This problem is not very pleasant, but it is possible to cope with it quite quickly. Let's find out what means (and how) you need to clean the toilet so that it remains clean.

Causes of contamination

Before deciding how to clean the toilet, it is necessary to classify pollution and understand the reason for its occurrence. The following types are considered to be the most common:

• Urinary stone;
• Lime tax;
• Yellow raid;
• Rust;
• Black.

Types in the photo

Urinarystone appears due to urine stagnation in the toilet

Lime raid affects due to the deposition of minerals that are contained in water

Yellow raid appears due to clogging of the hole from which water is supplied

Rust often appears due to faulty drain tank

Black appears due to the constant finding of water at the same level

And now let's learn the cause of this or that type of pollution. So:

• The urinary stone appears due to the forgetfulness of the "users" to the toilet. After the help of the needs, a person may forget to drain the water. If this is repeated often, urine dries on the walls, which leads to the appearance of divorces, and subsequently - and urinary stones. It is quite simple to get rid of them, but it is best to simply not bring the case to their appearance, in a timely manner cleaning plumbing.
• Lime tax is the deposition of minerals contained in the water on the walls of the toilet. It is worth noting that they are present both in river water and in a diverse. Thus, the more often you wash off the water in the toilet, the likely that the problem is aggravated.
• Yellow raid is eliminated very quickly. But if you run the situation, it can become the main reason for clogging holes through which water is supplied to clean the inner cavity of the toilet.
• Rust most often appears due to a faulty tank. If even a small stream of water is constantly flowing, over time, it forms a rusty strip. You need to repair the tank, otherwise such a problem will chase you constantly. It should be noted that the greater the iron is contained in water - the faster the rusty raid will appear.
• Black appears in the place where water is delayed. This is the most simple problem, eliminate it easier. It is necessary to simply regularly work out the inside of the toilet bowl by the Yershom, especially in a place where the water level ends.

Useful advice: on the rough surface of the inside of the toilet bowl, the raid is formed much faster. Therefore, in some cases it will be easier to trite to buy a new plumbing with an ideally smooth surface.

How to clean folk remedies

If you have already "launched" the purity of the toilet, and even the lubshik does not help, you need to resort to people's ways to eliminate pollution. Folk ways It can be used in private homes having a local sewer system (septic) and plastic pipelines.

Useful advice: During cleaning toilet bowls, it is necessary to protect the respiratory and hand organs from entering poisonous vapors and cleaning products. Use rubber gloves and respirator. Also take care of the eyes from splashes.

Table vinegar

Table vinegar helps get rid of lime raids and blade in the toilet

Table vinegar can dissolve lime raids and a blade at home. To do this, apply it to polluted areas and leave for a while. Before proceeding to the procedure, you need to pump off the water from the toilet and wipe the inner surface of the bowl over the dry cloth. After that, moisten the napkin with vinegar and impose it to the problem area. After about 4-6 hours, clean the leament of the scraper or the hero. If necessary, repeat the procedure. To strengthen the effect, first warm the vinegar to + 50 ° C, and then add a food soda to it (1,5 tablespoons of soda) or iodine solution (in equal proportion) will be needed to it.

Technical sorval acid

Technical sorval acid will help get rid of the blade in the toilet

Technical sorval acid looks like small colorless crystalline. This is a fairly effective tool with which you can get rid of the blade. It is poured under the bezel and withstands about an hour. Solochic acid crystals can also be brewed with water or alcohol. The effect will be about the same. After 60 minutes, wipe the smeared surface with a cloth and clean the ears.

Lemon acid

Lemonic acid will help get rid of the nour and yellowness in the toilet

Lemon acid is an inexpensive substance that can be bought at any store. It copes perfectly with many pollution, including stone bending and yellowing on the toilet. A packet of citric acid sachets for approximately 12 hours split raids and stone. To achieve maximum effect, it is better to repeat the procedure 3 times in a row. Lemon acid is one of the substances capable of returning your plumbing perfect look.

Baking soda

Food soda will help get rid of the nour in the toilet

Food soda is also effective to eliminate the bowl on the toilet. Need to pour it into large quantities At the places of severe pollution and leave all night. In the morning, rinse the water and pull the places to which the soda was applied yesterday. If the first time it did not manage to delete all the tax, repeat the procedure.

Carbonated water, coca-cola

Using Coca Cola, you can delete any toilet dirty

The soda, which contains citric acid in large quantities, is able to clear any toilet contamination. The best way In this category - Coca-Cola. To clean the plumbing, you will need several bottles of soda. Pour sweet water in the toilet overnight. In the morning you will not notice the slightest traces of pollution, as it is a conclusion. You can also simply moisten a rag with a gashed water and put inward the bowl of the toilet to the contaminated surface. Efficiency from this will not suffer.

Chemicals

Before applying this or that chemical means, it is necessary to familiarize yourself with the instructions. Before using chemistry, protect your arms and put on the mask so that in the process of cleaning do not impass the acids and alkali contained in such means.

Useful information: Some chemicals cannot be used to clean the toilet, if you have plastic sewer pipes or local septics (septics).

Liquid acids and alkali

Dozens of toilet cleaning agents are presented in stores.

• Ortophosphoric acid (5-7%). With its help, you can not only clean the toilet, but also eliminate the corrosion of the internal parts of the drain tank. Approximately 100 ml of the acid solution into the drain tank and the bowl of the toilet bowl should be left, leave for 10-20 minutes, and then wash off with water and clean the surface with the hero or brush. Orthophosphoric acid costs suspiciously, but in this case the price is not related to efficiency. Note that orthophosphoric acid does not affect rubber and plastic. It is necessary to use it extremely carefully, we must wear rubber gloves!
• A solution of hydrochloric acid (33%) is a very active substance that can be used to clean the toilet. Working with her, you must be as cautious as possible. Be sure to keep your hands and try not to breathe evaporation. It will be enough to just wipe the acid polluted sections with a solution, then pour one glass of fluid in the toilet. This is enough to clean it completely, just wait 20 minutes. At this time, it is advisable to cover the toilet with a lid. Note that hydrochloric acid can not be used if you have plastic water pipes. This substance is contained in the production of brands "Cillit" and "Toilet dot".
• Liquid battery electrolyte. As a rule, they enjoy car owners, but sulfuric acid with impurities of distilled water can clean and your toilet. Even if the raid seems "eternal". Apply and withstand battery electrolyte is necessary according to the same rules as hydrochloric acid. This tool is not suitable for regular use.
• Chlorine. To date, a lot of cleaning products are produced on the basis of chlorine. Among them are both both familiar and inexpensive whiteness and an advertised imported "Domasestos". It is important to know that drugs that contain in their composition chlorine, extremely negatively affect health. Despite its high efficiency, it is extremely undesirable to use them on a regular basis. How to apply chlorine correctly? Apply it on dirty areas and leave for 40-60 minutes. Then, blame the sorshik toilet and drain the water.

Useful information: Some people advise to pour "whiteness" directly into the drain tank. This method is quite effective, but it is extremely dangerous for the female reproductive system.

• Popular cleaning products. In household chemicals, there are a huge range of funds created to combat old pollution and toilet on the toilet. They are produced in the form of gels, creams or solutions. It is often applied by 40-60 minutes under the bezel, after which the toilet is cleaned by the Jershik. The procedure can be repeated several times in a row, if it was immediately possible to eliminate all pollution.

Powders abrasive

CAUTION: Abrasive powder can leave scratches on faience coverage

All abrasive cleaning products that are sold in stores are not bad clean the toilet. But small granules often leave micro scratches on the faience coverage. Because of this, the lime raid will soon appear again.

If there is no alternative abrasive option, use abrasive cleaning agents as follows: roll out all the water from the toilet bowl and pour the cleaning substance to it (the exact number is indicated in the instructions). Then leave the tool at least half an hour to start acting. After that, proceed to clean the surface. Take advantage of the hero or rigid metal washcloth. It is necessary to rub until the contamination is completely eliminated. Of course, this procedure is affordable and quite tedious.

Tank pills

Toilet pills perfectly disinfect it and fighting with a wave

Special tank tablets are not just effectively fighting with a climb and blade, but also disinfect toilet bowl. In addition, they possess a pleasant smell, which can also be considered a plus. Tank tablets disinfect the surface of the plumbing and prolong the timing of its operation. Buy Packing Tablets and place one capsule in the tank. After it starts dissolve, the water in the tank will be painted in the color of the tablet. This means that she began to act. As soon as the painting pigment disappears, put a new capsule in the tank.

In addition to regular prophylactic cleaning, it is also necessary to adjust the pressure of the water supply to the tank. This will significantly reduce your waste on utilitiesAnd also relieve from the constant appearance of lime deposits on the toilet. The most effective way is to put several filled plastic bottles in the tank. This will help reduce costs and save 2.5-3 liters of water during each use.

In the case of buying a new plumbing, give preference to the toilet bowls on which there is a double drain button and the mode of economical water use.

If you do not have a desire to melts yourself with a dirty toilet and cleaned it, call a professional from the cleaning company. It will be much faster to cope with pollution through special equipment and "professional" cleaning substances.

Periodic toilet cleaning does not take away from you a lot of time and effort, but will help protect the toilet from pollution. It is prevention that is the best way to deal with the nourge, stone and yellow. If your toilet needs to be overhaul, use our advice - and it will be successful.

The bathroom testifies to the pureliness of the owners of the apartment, so the bottom of the toilet must simply glisten. There are special storesthat help clean the knee of the toilet, however, it is necessary to apply them regularly. Some are wondering how to clean the toilet from the blade, which accumulated over long time.

How to clean

With the help of imaginary substances and devices and knowledge, how to clean the toilet to shine, you can provide complete cleanliness for a long time. To clear the toilet to the gloss is quite possible with the help of conventional caustic soda.

This tool is characterized by the fact that it is able to destroy any substances and contributes to a qualitative and rapid elimination of fat. Cleaning needed carefully, pre-put on gloves.

• select entire water from the toilet;
• pour cleaning bleaching liquid and wait 2 hours;
• wipe the bottom of the toilet brush;
• rinse all clean water.

Having attached a little effort, it is possible to perfectly clean the bottom of the toilet from rust, as well as various contaminants. After cleaning, the yellow-brown crust remaining from the blade, which is almost impossible to eliminate similar chemicals.

The toilet cleaning is performed with the help of acids. Salonic acid is able to quickly clean the toilet, high-quality eliminating the remains of accumulated rust, any type of pollution, including the existing urinary solar stone. Highly good to a tool It is "silit", which contains an acid in its composition. For a long time, leaving pure acid in the toilet should not be, because it can significantly damage the surface layer of enamel. This tool must be pre-diluted with water and wash off a few minutes after applying.

You can perfectly clear the bottom toilet bowl by vinegar. It is best for these purposes to use acetic concentrated essence. It is quite possible to use sulfuric acid extracted from the battery, because it acts as an electrolyte. It will help to get rid of severe rust.

If you need to qualitatively clear the toilet from the lime-plating and disinfect the surface, killing all the microbes, you need to use chlorine. It bleach perfectly and helps to eliminate the yellow flare, just clean the surface with a brush. Many are interested in how to clean the toilet to get rid of the yellow plaque and lime deposits. For these purposes, PEMZA is perfect. It is best to use such a means attached to a special stick. In combination with various cleansing abrasive drugs, the pumice helps to remove even blockages.

Perfectly helps to fight with a raid and the existing blade and oxalic acid, which saves even from rust and can be used in conjunction with other means.

How to eliminate pollution in the most running cases

Very difficult to clean old toiletHowever, there is nothing impossible. It is no longer so smooth in the surface layer, because it is very scratched, damaged. Even with regular cleaning, it will gradually be contaminated by various substances more and more. Many for this reason are interested in how to remove the stone in the toilet, the surface of which is no longer so smooth and smooth.

It is perfect for cleaning the old toilet "Coca-Cola", which will help to give an excellent whiteness and brillia to the toilet. In the toilet form you need to pour 1 bottle of carbonated drink and leave for 2 hours. It is just an excellent tool for cleaning the toilet from the blade and accumulated lime-plane. Whatever cleansing the mixture, you need to comply with certain precautions:

• should not be tilted very close to the toilet so that harmful evaporation does not fall into the respiratory tract;
• needless to wear rubber special protective gloves;
• it is necessary to ensure that the remedy does not fall into the skin or eyes.

If there is an allergic response to chemicals, then it is best to use more natural tools that are added to the bottom of the toilet (pre-remove the water and blown with a cloth).

How can you eliminate the blockage

Residues of oily and coarse food poured in the toilet, and other blockages can provoke obstruction sewer pipe. Clean a very strong blockage help Vatuz or big ordinary plastic bottleWith which you need to pre-cut the bottom.

Making certain pushing movements, it is possible to reduce the resulting plug so that water began to flow freely. And the cable will help to get rid of an excessive blockage, but it needs to be competent.

In addition to mechanical methods for cleaning the toilet, there are also chemicals. It will help hot water from the intermittance from the inside. To eliminate the cloth, it is necessary to pour boiling water into the toilet to the toilet, which will help very quickly and qualitatively clean the pipes.

It is necessary to carry out the cleaning process very carefully, because the coating can crack from the sharp change of temperature. Hot water You need to pour very slowly so that the surface can warm up well.

Do not forget about the diverse specialized means that are designed to clean the drain. However, it is necessary to strictly follow the rules for the use of such funds, this will help excellently eliminate the blockage provoked by the accumulation of pollution.

What you need to do to glitter

In order for the toilet to be very clean and brilliant, it is not necessary to apply excessively strong chemicals. It is enough just to maintain your toilet in pure form. Additionally, you can add a special tool to the tank that will serve as auxiliary protection. To maintain the purity and gloss of the toilet, it is necessary to take into account the existing rules:

• it is necessary to ensure that the water is inconspicuously imposed from the tank;
• no need to pour out the remains of fat and throwing food into it;
• you need to constantly clean with the help of the hero;
• it is necessary to regularly rinse with specialized detergents.

It is worth remembering that new products are much easier to contain all the time cleanly than with time to devote a lot of strength and time to clean from strong pollution, spoiling a smooth surface.

Each hostess dreams of her house glitter from purity. But modern life Women do not always provide this opportunity. Work, children, family - now and there is no time for cleaning. If the toilet is not subject to the toilet for a long time, wearing a blade can be formed on its surface. The blade is an outflow of minerals, which, together with urine, fall on the walls of the toilet. Usually, the blade is formed under the brine of the toilet, as well as in the place of water stagnation.

Why the blade is formed

1. Most often, the urinarystone is formed on toilet bowls with late and insufficient plum. This is especially true in families where there are small children. The kids do not always remember the plum and minerals from urine enied in the walls of the toilet.
2. If the drain bar is defective, it also contributes to the formation of a lime-plating and blade.
3. Plumbing with a defect or rough surface is an ideal place to accumulate dirt, microbes, plated and stone.
4. Old toilets with a long service life are most susceptible to the formation of urinary stone.

The blade has a property to grow and increase in size. If it does not fight with him, it significantly narrows the clearance of the toilet and pipe hole. Therefore, if you encountered such a problem, you do not need to tighten with its solution. You need to fight the blade here and now!

1. First you need to drain the water from the toilet. It is easy to do with a mug with a handle - just pull the water. After all, any means acts much more efficient without water.
2. After that, put on gloves and respiratory mask. Most modern chemicals quite aggressive.
3. Take any cleaning agent, on the label of which it is indicated by its ability to fight blade. For example, a toilet duckling made on the basis of hydrochloric acid is very effective even in standing water. In the household chemical line, the Domasestos has a special means for the blade for blades. According to the manufacturer's application, this tool completely destroys even old year-old growths. Very effective in the fight against urinary stone and Cillit, its performance is celebrated by many mistresses. Another powerful tool of household chemicals is Mr. Muscles in granules. He not only cleans the toilet from the blade, but also whitens the surface. The choice of professional household chemicals remains yours.
4. Apply the chosen tool on the bezel to the toilet and in those places where the urinary stone has grown. Leave for a couple of hours. It is impossible to use the toilet at this time.
5. After the designated time, spend the walls and bezel to the toilet brush. It is better not to use metal brushes, they can scratch the plumbing, which leads to the re-education of the plaque.
6. Of course, to get rid of one time from a dense and thick plaque will not succeed. If necessary, the procedure can be repeated. In this way, you will get rid of the thickness of the blade with the thickness of the blade with the thickness of the blade, until you bring it completely.
7. Please note that during processing in the bathroom there should be no children and animals. Chlorine-containing household chemicals are very toxic.

How to get rid of urinary stone with handicrafts

If there are no specialized gels at hand, you can use the fact that you have at home. Here are several effective ways Getting rid of urinary stone.

1. Vinegar. This is an excellent removal of blade removal. For this we need vinegar, food soda and iodine. These ingredients will be found in every home. A glass of vinegar must be slightly warm. Take not very strong, 9% is usually enough. Be careful - do not inhale the pair of preheated liquid. After that, add a spoonful of food soda to hot vinegar and a teaspoon of iodine. Mix the composition and pour it into the toilet. It is best to do it overnight so that the prepared means have time to expose. In the morning, go through the toilet with the brush and thoroughly wash everything.
2. Bleach. This is very aggressive and very effective tool To combat urinary stone. However, it does not act in water, it needs to be preached. Pour the glass of any chlorine-containing bleach and leave for several hours.
3. Lemon acid. This is another productive way to get rid of the plaque. It is not necessary to do anything, just pour a lemon acid packet in the toilet 3-4. Leave for a while. Fully the stone does not remove it, but small growths will be easily eliminated.
4. Chlorine. Buy chlorine bag and pour it into the toilet. It is best to leave the remedy for the night. Chlorine not only helps to destroy the stone, but also disinfects the surface, which is also important. In addition, after chlorine-containing means, the toilet will shine white again as new.
5. Anticalc. This is a universal means to remove any type of plaque - scale, blade, limestones. Pour the bag of this powder overnight in the toilet. In the morning you will find that the blade began to fall off himself, right with pieces. Pollution remains will need to be cleaned with a brush or an enshik.
6. Oxalic acid. This tool is suitable for labor-based and solar growths. Solving acid can be bought in housekeeping stores, it is a powder white color. When using oxalic acid, it is very important to wear a respirator and gloves, as a means is very toxic and aggressive. If the urinarystone is localized only in the place of plum, the acid needs to pour into the water. If the stone was formed on the toilet bowl, you need to apply a little powder on a cloth and carefully wipe polluted areas. Leave the toilet for a while, after which it takes it over a rash and press the drain button.
7. Carbonated drinks. This is a modern, but very effective tool of getting rid of the blade. Take a couple of bottles of Coca-Cola, sprite or phantas and pour into the toilet. Leave for three to four hours. High citric acid concentration destroys the stone and cleans the toilet.
8. Electrolyte. This is the most thermonuclear effect against the blade. The electrolyte is used in car batteries, but perfectly destroys various kinds of growths. However, before use, you should make sure that all the pipes of your sewer system Metal. Plastic pipes may be damaged. So, pour a little electrolyte in the toilet and leave for a couple of hours. After that, act similarly to the previous ways - clean and flush.

It is worth noting that the urinarystone appears on the launched plumbing when the toilet cannot be cleaned for a long time. Therefore, in order to avoid similar growths, it is necessary to clean the toilet to determine the toilet with preventive tool regularly. Any household chemicals can cope with a little pollution. To do this, it is enough to pour a little chlorine-containing means on the rim of the toilet, and then wash off all the water.

Also pay attention to the correctness of the drain tank. If water flows constantly, it contributes to the formation of limestone and urinary stones. This is especially true in regions with rigid water. To soften the water, you can put a small filter into the tank, which will protect the toilet from various kinds of growths.

Beautiful prevention of blade formation is special plates and tablets that are attached to the inner wall of the toilet. With each drain, the surface is cleared and disinfected, which is important for general hygiene.

As noted, the blade is formed on rough surfaces, in places of chips and cracks. To avoid this, you need to take care of the surface of the toilet and not brush it with abrasive means. It is not necessary to pour out hot food to the toilet - it can cause the formation of microcracks.

Old, damaged toilet bowl is a potential place for blasting urinary stone. By eliminating it once, be prepared for his re-appearance. To avoid a constant struggle, you need to buy and install a new toilet with a glossy surface. Watch out for its condition, regularly clean its surface, and the blade of you will no longer bother you!

Video: How to drop the toilet in 15 minutes from one year old blades

The cleanliness in the toilet is one of the priorities of a conscientious hostess. All items in the bathroom are contained clean not only due to aesthetic considerations, but also for hygiene purposes. Toilet exclusion. This subject of plumbing needs to be laundered from ordinary daily pollution and periodically arrange general cleaning: Missing all parts of fixtures (tank, cover, chaulchak, etc.) and prevent the appearance of rust, stone, clutch. Otherwise, the toilet will become a seating for bacteria or it will be born and will deliver a lot of unpleasant hassle. There are many ways to clean the surfaces from pollution.

What to clean the toilet

Today, the assortment of cleaning products for plumbing is very wide. But in addition to household chemicals, there are folk recipes for compositions. We list the main folk and professional funds.

Folk remedies

Folk recipes for cleaning the toilet bowl are primarily intended for regular care. Soased sediments and pollution will require special vocational money.

• Vinegar. 9% vinegar solution Heat up to 40 - 50 degrees, pre-cover with a capacity with a lid. For the procedure, there is enough one glass of 250 ml. Add one tablespoon of soda and iodine droplet. With this solution, pour the toilet or apply a moistened napkin to a dirty place. Wait from two to six hours and proceed to the removal of dirt. This means is suitable for removing lime raids, since acid corps mineral sediments.

  Vinegar helps in combating limescale on the walls of the toilet

• Lemon acid. Lemonic acid, like vinegar, will help get rid of the climb and blade. Put the contamination with citric acid crystallines and leave overnight. The powder should not be absolutely dry, it is necessary that the acid is rushing to the consistency of the casis. The amount of funds depends on the area of \u200b\u200ba dirty place. If citric acid has not helped from the first application, you can repeat the procedure. Some hostesses advise add to citric acid woodwoodwhich will give the effect of foam.

  Crystals citric acid will serve as a cleaning agent for toilet

• Baking soda. Soda helps to cope with mud on various surfaces. It can be applied to the cleaning of the toilet. Pour soda to dirty areas and leave for the night. In the morning, we carefully treat the stains with a rod or sponge and rinse with water. If necessary, repeat several times. Another way to clean up with soda: pour soda to the surface you need to clean and wait for half an hour. Then pour the vinegar and, while the reaction goes, wipe using the jarshik. The soda will help in the fight against bold rest and disinfect the surface, and acetic acid will cope with limescale and rust.

  Food Soda - Universal Cleaner

• Coca Cola. Finally, to the toilet bowl, it is possible to pour into it to all the known cola, which includes orthophosphoric acid. She will remove the nails and the stone. Pour better overnight to ensure that the means is guaranteed.
• Mustard powder. For everyday cleaning, the mustard will fit perfectly - it disinfects and flushes a fatty film. Dry mustard (1 tbsp. L. Mix with starch (100 gr.) And lemon Acid (1 Art. L.) Add waters to turn out Cashier, and apply on the walls. After a couple of hours, wipe the sponge. With the solar rust and rust mustard, it is not possible to cope, so it can only be added to it as a disinfectant.

  Mustard powder can serve as an antimicrobial agent

Professional means

Special tools include strong acids, pitch or chlorine. Therefore, before using them, take care of your safety: put on rubber gloves, protect the respiratory organs. Unlike popular "soft" cleaning products, professional household chemicals copes faster with mud on the toilet surfaces, acting more aggressively.

• Oxalic acid. The remedy is sold in pharmacies and housekeeping stores. Apply this powder on the wet rag and sweete the contaminated place. If there is an opportunity, pour acid into the toilet and leave for the night. There are also professional agents based on oxalic acid - Ultra Sanoks, Sarma - gels of domestic production.

  Sorrelic acid corrosive sediments on the walls of the toilet

• Orthophosphoric acid. 5-7% solution of this acid will perfectly cope with air pollution. And this means can be pouring into the tank. Plastic pipes using orthophosphoric acid will not suffer. Fill in a toilet and a tank with an acid for 15 minutes, and then wipe thoroughly and wash. This tool removes rust and limescale. But it is possible to purchase a miracle reagent in auto shops or in stores specializing in radiosters, since the appointment of orthophosphoric acid is used for soldering.

  Orthophosphoric acid helps to eliminate rust

• Chlorine. Quite often in public toilets we meet the caustic smell of chlorine. This is not surprising, since chlorine has antibacterial properties and bleach perfectly, so it is used in places common use. But at home regularly use chlorine for cleaning is not recommended, because it is able to damage the ceramic surface of the toilet, and it is harmful to health. But in isolated cases, you can still use such a means. Especially if you need to disinfect and whiten the bowl. It will be suitable for the well-known bleach based on Chlorine "Whiteness". Apply "whiteness" to the surface, and after half an hour, wipe using a jarshik or sponge and rinse with water.

  Whiten whitens and disinfect

• Hydrochloric acid. On the Internet there are advice on the use of a hydrochloric acid solution, but in its pure form it is very dangerous, so we recommend using only funds based on it: "Silit Bang", "toilet dot", "Domasetos". In addition, all professional agents are equipped with a comfortable thin spout for cleaning the surface under the rim and have a thick gel consistency. Everything else on many packages with factory funds there is protection against children.

  The domain is a hydrochloric acid

• Peumolux. Peumolux is a cleaning powder based on soda. The pematuks also includes marble crumb, dull and fragrances. The effectiveness of the pematuk is achieved due to the abrasive structure. Therefore, it is well cleaned to clean and the blade. Before applying the powder, throw out all the water from the toilet. Purify the remedy for dirty areas and spend the sponge. The minus is that the powder scratches the surface, and in the microcracks in the future the dirt is clogged.

Do not use electrolyte to clean, as some sites advise. The risk of getting a chemical burn exceeds possible efficiency.

It is worth noting that if you have a colored toilet, then it is not necessary to use drugs with citric acid and chloro. They can whiten the surface or leave a divorce.

Let us summarize: folk remedies are safe, but require great effort and time when cleaning. Special tools are dangerous to health, but when proper use Credit with cleaning more efficiently and faster. The choice is yours.

How to wash the toilet

When the tool is selected, proceed to cleaning.

Instruments

For washing, you will need:

Start cleaning

To stay with satisfied the results of cleaning in the toilet, follow the following procedure:

1. Remove all the unnecessary toilet bowl so as not to spat. Do not put your funds and tools on the tank: they can simply fall inside.
2. Before cleaning the bowl of the toilet, remove water from it using a vanza.
3. If the sand has accumulated inside, which is not washed off by a simple plum, try to pour the water bucket at the same time and work with a vacuum. Sand should leave.
4. Moisten the toilet inside the warm but not hot water. So your medium will be easier to cope with mud.
5. Apply a cleaning agent to dirty sections inside the bowl, not forgetting the surface under the rim. The time to wait after applying depends on the type of means, but not less than 30 minutes. It is necessary to disinfect the toilet.
6. While the means acts, go to cleaning external surface. Start from above: Wipe the tank, handle, cover. To do this, use the same tool as for the inner surface of the bowl.
7. Wash the seat thoroughly and wipe it dry.
8. Apply the loop to which the seat is mounted and clean it with a rigid sponge or jarshik. An ordinary rag will not be able to get to all areas of the loop.
9. After the seat, I wash the glass - the bottom.
10. Next, we return to the inner surface and with the help of a rod or sponge we rub the means and purify from contamination. We will definitely remove under the rim where many dirt and bacteria accumulate. Then we wipe the bottom of the bowl, and then clean the drain to the bottom.
11. Close the lid and drain the water with the remnants of the means.
12. After cleaning, do not leave the lubshik wet in the tray, but dry, putting it under the cover of the toilet - water stalks into the bowl. So you will avoid breeding bacteria in the tray and unpleasant odor in the toilet.

Preventive measures

In order not to deal with rust, stone and a ride, prevent their appearance, following these recommendations:

• do not allow DC current to do this for this, follow the serviceable state of the drain tank;
• do not dispose of food residues in the toilet, especially fatty waste;
• use fixtures that support cleanliness with each plum - discs, tablets, containers with detergent gel, fastened under the bezel;
• at least once a week, wash the toilet to the cleaning agent.

Cleaning toilet bowl. Video

So that Plumbers always pleased the eye and did not become a source of disease, clean the toilet regularly, applying adequate tools and methods. And timely prevention will save you from additional effort when cleaning the toilet bowl.

So, every morning I get out of bed, we go to the bathroom and from convenience as well external view Our friend "Toilet bowl", often depends on the mood, which is why it is so important that the shine and the perfect appearance is the first pleasant moment of the coming in the morning. To achieve all this, you need to know how to wash the toilet at home without much effort.

It is about this that a conversation will go ... So, you decided to change the appearance, blurred with razavchin racks, clogged with microbes and blades, a long-suffering toilet bowl. Getting Started to this hard work, try to first decide what you want to get as a result, perfect shine without rust or kill all microbes?

We can say that you will be interested in to clean the toilet easily and quickly, effectively cope with all these problems.

You can easily deal with all this perfectly, contacting already known cleaner brands, such as: "Toilet duck", "Domasetos", Santri gel. Effective toilet cleaning products, give their desired result, rust disappears, microbes are killed and there is shine. Although not always, but still doubts, and how they affect the surface of the toilet and how much it will last.

Let's see how to clean the toilet from the climb so that it becomes perfectly white, brilliant and clean without chemistry so that he serve us for a long time and did not lose his appearance.

To avoid the doubts we keep us, remember the newly forgotten babushkina recipes. These small tricks will help you, get such a necessary desired result.

How to clean the toilet soda

To clear the toilet from a lime flush to the shiny shine, remember about ordinary food soda.
So, we clean like our grandmothers "soda food". This recipe will tell you how to clean the toilet at home soda and vinegar. The main thing is to do everything according to the instructions!

Clause toilet food soda

To the outlined cleaning we do the following:

• we sprinkle the abundantly inner surface of the toilet bowl of food soda, let it stand from half an hour;
• then poured with vinegar;
• while everything is foaming and boils, we carefully work the brush.

The result from the effect will affect you: neither rust, nor lime attack, no blade, only perfect shine.

How to clean the toilet with mustard powder

Here is another, long-forgotten recipe, how to clean the toilet folk remedies. Probably every hostess in the house there is an unrelated pack of mustard powder. Yes, with it, you can clean the toilet to shine, prepare a remedy for mustard, vinegar and ordinary starch, which will undoubtedly be found in every home.

Clean the toilet with a mustard powder

Recipe funds Next:

• take 1 tablespoon of mustard powder;
• there, add 1 tablespoon of citric acid;
• i fall asleep 1/2 part of the starch pack;
• everyone is thoroughly mixed with the addition of ordinary water.

Tool for cleaning toilet bowl is ready, proceed to cleaning. We apply to the surface of the toilet and leave for a while, then wash off the brush. The effect is guaranteed excellent and without much effort.

Clean the toilet ushius

Recall the usual vinegar. It will also give an excellent and effective result, without effort will save the toilet from the blade inside.

Recipe funds and method of application:

• we take and heat up to forty degrees a glass of nine percent vinegar;
• add a small pinch of salt into the heated vinegar;
• all this is mixed to the complete dissolution of the salt and pour on the walls of the toilet;
• we leave for the night for a better result;
• in the morning we wash off running water from the tank.

Everything is perfect, easy and simple - the toilet is cleaned to shine.

Clean the toilet wood ash

Remember people's recipe To clean the toilet with wood ash. So, a pair of lemon acid packs and wood will make your toilet smile, and shine an amazing gloss.

Cooking recipe and use method:

• we take ordinary wood ashes (it will give the effect of abundant foam, which will facilitate further cleaning);
• alast mix with citric acid (everything is equal in equal amounts and proportions);
• on the night we fall asleep into a glass of toilet bowl, in the morning everything is cleaned with a brush, easy and effortless.

This composition will help get rid of unwanted pollution.

Much can be remembered and applied in practice, but it is better not to forget that the daily cleaning is so ordinary jarshik and a little ordinary cleaning agent for the toilet, will give you the opportunity to not think about the difficulties of cleaning unwanted heights. All done during work will save your toilet in perfect condition and save nerves, strength and time.

And now we offer to watch a video about how to wash the toilet correctly, as well as about the rules of care for it:

We hope that our advice will help you quickly clean the toilet and get rid of unwanted towels, herdes and rusts in such a wetland.

If you have your toilet cleaning recipe, then share it with other users in the comments to this article. We will be very thankful!