When creating diverse interiors, especially retro, art deco and other styles with folklore motifs, designers are involved in nostalgic moods. And now our apartments are transformed into stylish apartments, which organically fits any designer whim: stucco, bent furniture or shirma. With your own hands you can easily recreate both this vintage item, and the whole appropriate accessory of the apartment.

Shirma do it yourself

Recently, Shirma was perceived as just a strongly outdated detail of furniture. But on it still nostalgic many of our compatriots. Moreover, the screen has recently popularized in a much greater extent than the notorious ottomanka and goats.

Modern designers give this subject of interior new life Not just like this: Shirma allows you to divide the space for separate areas, while creating a small secluded corner. To obtain such a practical nice thing, it is not necessary to spend huge money for luxurious antique samples.

Do not rush to throw out old doors - of which you get a great decor element for your home

You can make a screen from smooth boards ...

... or from ready-made door flaps that are sold in building stores

Decorative screen is performed quite simple and with your own hands. For example, even if it is not perfectly owned by the skills of performing carpentry work, then make a framework that will serve as the basis for the manufacture of individual flaps, it is possible and without resorting to wise technologies. Of course, they must clearly coincide in the sizes, be perfectly even, not to go out, which is only true to real stoles-professionals. But the current opportunities allow us to do without such difficulties. Just instead of the basis of the future island of Screens, you can take a ready-made framework from any store of artistic and creative works. These durable subframes are made quite professionally and efficiently, and therefore they are well suited for the manufacture of the screen. And since they are produced in a variety of sizes, they can be easily chosen for the manufacture of the most optimal shirm for our conditions.

You can not even modify the doors if they are in a decent state

Shirma will divide the house on the zones if there is a need

For example, it will take 9 standard subframes of 50x70 centimeters to obtain a three-grated screen with a height of 210 centimeters with a height of 210 centimeters. They need to be grouped by three frames for each sash. Of the 6 frames of the size of 60x90 centimeters, you can add a score of 180 centimeters with sash of two elements and so on.

We make a screen of 4 sash. You will need 4 smooth boards.

You will also need wallpaper, your taste

Boards need to be painted from all sides. But if you have little paint, you can only paint the ends

Then on the boards (after full paint drying) glued wallpaper

It turned out such a beautiful screen with my own hands.

In the choice of subframe, it is necessary to proceed not only from the desired proportions and the planned screen size, but also from the range of assortment proposed. When choosing from the available frames, you can significantly save time and simplify the fulfillment of the tasks set in front of yourself. As the same principle is being made. The only difference is that it is much easier to perform it, because the size itself is less than a third. In addition, the consumption of funds is also significantly reduced. But in such a shirma it is not without a decent decor. After all, if its "adult" analogue can be performed at all without any decorations, then children's interior Prehastages to fabulous toy parts.

How to Make: Required Tools and Materials

To prepare for work, you need to stock consumables required by the necessary consumables.

1. After the design of the design, you need to purchase the required amount of wooden frames of the same size, which is selected by the number of sash and height of the planned screen.
2. It also takes a dense material for tosing subframes, the calculation of which is calculated taking into account the allowance, that is, at least 3 centimeters is added on each side. The fabric is desirable to choose with a pleasant pattern and color. It is important that Shirma is beautiful also on the lumen.
3. You will need another dense decorative braid of such a width that will allow you to close the ends on the subframes. Its length should be calculated so that it is enough to cover all the sash around the perimeter.
4. Fastening braid and fabric is convenient to carry out a construction stapler, which can be purchased in a business store or on the market.
5. The sash can be combined with the help of piano or card loops, for mounting which a screwdriver is useful with a set of screws.
6. Fastening subframes in each section is performed by bolts, nuts and an electric drill, which will also have to get in advance.
7. You also need glue for fastening the braid, and for painting the wrong side of the subframes you need to prepare acrylic or oil paint.

To make such shirms, you will need only half the doors, fastening and paint.

After preparatory work You need to check the draft of how to make a screen with your own hands, and you can proceed to work.

• The adjacent side of the subframes must be drilled, enter the bolts into the holes and firmly pull the subframes that form a single shutter for the screen. On long sides of the section need to strengthen with the help of longitudinal planks.
• It will not be superfluous to cover with the cloth each of the flaps on the front side. This part of the subframes is easily determined: the planks of its slightly begged inward, forming a bulk form. In this work, it is important to adhere to a strict order to obtain a uniform tension of the fabric and eliminate its sagging. The first clip is driven into the middle part of each of the parties having a greater length. After that, it is driven along a clip to the edge of each side. The same actions are performed on the opposite side. At the same time, it is important not to forget to constantly pull the fabric. Further sides alternately are fixed. After the end of the rough tissue stretch, each side is made by 3 staples that ride until the stop. Gradually, the rest of the clips are fully attached while simultaneously pulling and smoothing the fabric. As a result, the gap between each two paper clips should not exceed five centimeters. In order for each angle of the sash to look aesthetically, you need to lay a neat tissue fold on it. Surplus fabrics protruding for the edge of the subframe should be trimmed with scissors.
• Further around the perimeter of all sashes is tested, which is fixed using glue. An uneven calf of the fabric is hidden, the clips are hiding, which protects the floor from the scratch when the screen is deployed.
• All wooden parts available for Furnishing need to paint. The paint is selected in the tone of the trim fabric to give shirma beautiful view On each side: with facial, with an invalible and end.
• It will only remain copold with loops all prepared sash, after which Shirma will be ready for use.

Such door flaps can be bought in a construction store

And fastening there

It remains to connect the sash and paint them into the desired color.

Interesting Shirma with their own hands, the master class of which is offered on many sites, it turns out using electricity. On the basis of the previous idea, you can construct backlight for the screen. Then it will turn out not just a piece of decor and furniture, but a full-fledged lighting portable device. The essence of the crafts is that the backlight must be closed with an inside of the subframe. The backlight must correspond to the size of the screen and tighten the material for the color of the entire product. The winding can serve, for example, organic sheets. And in the resulting voids from the inside the screen is mounted light bulb or even a more secure LED. In the evenings, Shirma will help create an atmosphere of comfort and successfully transform space.

In many versions of Shirma, which serves today, just a charming element of the interior is borrowed from Japan. As ancient times, the Japanese was visually divided by the dwelling, they used them to create a privacy site. Today, Shirma again serves not only original element Decor, but also a practical means of zoning premises. A beautiful, elegant screen can be independently made in a trendy vintage style.

Optionally, a homemade screen can be decorated, for example, with the Decoupage technique

For operation, you will need 6 wooden pars of 1.8 meters long, 6 panel short lengths, which depends on the estimated width of the screen, and in turn depends on the size of the room. To determine the appropriate size, the width of the room is measured and the resulting number is divided into three. It is also necessary to stock up the cut of the opaque material of the colors, painting tassel, 4-door hinges, a stapler for furniture, old letters, notes and pages from books. It is also necessary to work with a strong tea with welding, iron, PVA glue, screw screws, nails, hammer, braid or decorative plank.

Shirma-partitions do it yourself Frame based on wooden bars. After the assembly of three wooden frames from bars bonded by screws, the finished frames are attached to the door hinges and lacquered. Cutting the tissue is cut into three rectangles of the corresponding dimensions. It remains to start creative work. From the title pages of favorite books, old letters or love notes, writings, poems and other commemorative leaves are made by photocopies. They artificially stare strong welding of tea, after the absorption of which the paper strokes the iron. So the effect of antique sheets is obtained. The next step is the gluing of the compiled sheets to the tissue. After complete drying of the glue, the fabric is neatly stretched on one of the frames and is nailed with a furniture stapler. After that, the fabric is strongly stretched and nailed to the other side of the frame. It is necessary to ensure that the folds are smoothed, and the fabric was glued as uniform as possible. The cropped edges of the tissue and clips on it are stuck with a braid or covered with a decorative plank. Free frame bars are processed by the skin, to give them a vintage look. After that, Shirma is ready for use!

Video

The lifting partition for the room is a slightly forgotten interior element, equally worthy to be called and decor, and furniture. The multifacetedness of its functionality and sophistication performed by the amazing find in modern decoration premises. Thanks to the impermanence of lightly portable design, the design with its use will never be boring. Showing a fantasy tool, you can make a screen for the room with your own hands.

Having bought a screen for the room, it may seem to you at first glance a rather non-serious and not functional subject. But it is in frivolousness, impermanence and ability to instantly modulate the space of the room manifest itself the main advantages of this subject of the interior. And if necessary, Shirma is easily removed, thereby not having a lot of space.

Classic models of Shirm consist of three separate sections interconnected by loops and folding along the type of harmonica. Frames are usually performed from light material, such as tree or plastic. For filling, textiles, skin, dense paper, twine, polycarbonate and other materials are used. Such screensavers work perfectly as the delimiters of the residential space of small areas on the square of the rooms.

Lightweight versions of wooden partitions are shirms, skillfully created from rathana or yav weaving. Pleasant and quiet colors of products from Amber to Olivekova will emphasize naturalness in the interior. Decorating sophisticated and weightless screens from bamboo curly houseplantsThey can be used as a decor stylized under garden gazebo.

Metal wrought-iron shirms are visually light and transparent, but their designs are quite massive. Such products are performed rather a decorative component, so as to deploy or fold them, it is necessary to attach a certain force. In addition, if their legs are not supplied with the spyers, they can damage flooring. Openwork and graceful, they will bring a romantic mood to the interior. Appropriate for spacious rooms of private cottages or overall apartments.

Universal shirms - with shelves or pockets can simultaneously separate one part of the room from the other and perform the role of racks and shelves. Given the preferences, in the pockets and on the shelves of such screensavers, you can position books, figurines, vases and other decorative things. If such a screen is to cover the place of desktop, pockets are used as penalties for stationery.

The design of the screen screen is a representative of stationary placement models. Such screensavers do not fold and mounted to the floor on an ongoing basis. Screen frame can be made of wood or metal rod. Plastic, textiles and even woven metal cable can perform material. There are screen models inexpensive shirms for the room, the legs of which are equipped with wheels for free movement. They can be laid, they are compact and suitable for modest apartments.

Width-Partitions for residential rooms

To bring an element of originality to the interior, it is not necessary to purchase designer models at a high price, you can buy an inexpensive screen for a room from a collection of photo partitions with an image appropriate and mood. In product catalogs, there is an incredible number of options with any plots suitable for various style directions. Such an acquisition will be quite by the way for a small room, and for spacious premises.

Screens in the interior: photos of flawless models

The functions of such a delicate object as Shirm is quite diverse. It easily copes with the separation of space, it closes the creative disarray of the working office or an insufficient bed from an extraneous eye, protects from the annoying sunlight or simply acts as an element of the decor. Some models are made of moisture-resistant materials and can be used in bathrooms.

The widths of the oriental style, decorated with painting look unsurpassed. Image motifs can be the most diverse: trees, flowers, birds, animals, figures of people. Particularly luxuriously look at partitions, the filling of which is completely carved or inlaid by gems. Such products will become an impeccable decor for colonial style adherents.

A skillfully chosen shirma from wooden frames, covered with silk cloth, is capable not only to serve as a separator for the room, but also emphasize the shared taste of the owners of the house. Using almost weightless shirma, you can visually balance the massiveness of the main furniture and refresh the already familiar interior. A model with multiple sections looks particularly interesting.

Helpful advice! A low screen with the use of stained-glass or matte glass can be used as a slope by setting it on.

Small models of folding wrought structures are used as a fireplace screensaver, which looks more harmonious in such a framing. Folding shirma-partition with mirror flaps will close a part of the space from the review, optically increasing the other half of the room. This version of the performance will not just decorate a small room in the area, but will save from the feeling of shy in square meters.

Shirma from an openwork wooden lattice painted in white color, creates a sense of the holiday in the room and gives it an elegant and fresh species. At first glance, the apparent fragile, such a model is associated with green garden, recreation and sea. If the screen is defined as stationary, it can be decorated with decorative alive or artificial plants.

Options for using Shirma for the Children's Room

The proof of the incredible versatility of the room lifting-partition is its use in children's rooms. There are a lot of options and all of them are functionally justified. The main purpose of the screen in the nursery is a breakdown of the room for an educational and sleeping or gaming zone. Buy partition to a child's room better from a natural, safe and lightweight material.

Suitable light design With Ramami Is wooden bar and tissue fixed with ties. It is easier to care for such partitions: as contamination, textiles can be easily and quickly removed for cleaning or washing. It is very convenient to use in a children's model with built-in shelves, pockets, as well as frames for photos and drawings.

Helpful advice! Shirma with shelves, which is placed in the children's room, should be stable to avoid random tipping.

While the baby sleeps, you can burn the breadth of the baby bed from the window, protecting against sunlight or from the light, which is used by the elder child when performing lessons. If the children's room is also intended for both a boy, and for a girl, with the help of a partition, you can organize a comfortable zone of disguise.

For a young family with a small child, in the property of which there is only a small one, you can buy a decorative score with a double-sided pattern. She will become fast way Create a cozy corner for the baby. Select the models, on one side of which the children's drawing is applied, on the other - the ornament suitable for the style of the whole room.

Often in the children's rooms install screen screensavers with screens from PVC, which are bright images of favorite fabulous and cartoon characters. Such a colorful thing will surely contribute only to the good mood of your child. One of the creative usage uses for the children's room is a puppet theatrical performance.

Bathroom shirma

It is very convenient for the folding wiring partition for installation in a spacious bathroom with a window: it can be used as a speed to tanning the window opening or, moving, form a space for a small locker room. You can install a screen with pockets for storing small bath accessories, and equipping the partition with hooks, it is convenient to place some home clothing on it.

Recently, shirma-fences for the bathroom have become popular. Such structures look more presentable than traditional curtains, and due to transparent filling, do not overload the room. The bathroom screen allows you to use plumbing for both bath taking and as a shower. Such a barrier protects high quality space from droplets of water when taking a shower.

There are several variants of shirma designs for the bathroom. It can be a model with a frame of several sections. Usually, two extreme sections are installed motionless, and the other two are moved along the aluminum profile by means of rollers. The number of sash in the model is determined by the layout of the bathroom and the position of the bath itself.

Frameless scrolls are made of 8 mm glass without framing. For accurate adoption of water procedures, it is possible to use a single stationary partition fixed by the vertical side to the wall, horizontal to the side of the bathroom. There are shirms with one panel attached to the wall by means of a loop, which allows it to open.

Frameless - the most convenient option for the bathroom

Helpful advice! Very convenient for the bathroom model of a frameless screen of two sash, one of which is still, and the second can open, with an angle of rotation of 360 °.

Where to buy a score-partition for room

You can purchase an exclusive shirma model by ordering the product on furniture factory Or referring to the enterprise forged products. But you need to be prepared for the fact that work on individual orders and sizes will cost you a penny. It is much more profitable to buy an inexpensive width-partition for the room in the online store or on the site for the implementation of the objects of decorative furniture for the interior.

Internet catalogs offer a huge selection of various performance at reasonable prices. An assortment of models using photo printing is calculated by hundreds of options. A convenient search system will help find the product like a photo or price. Specialists of the company can provide advice on the choice of the product and the calculation of its cost (in the case of an order for individual sizes). Discounts and promotions are possible, a warranty is provided for all item.

By resorting to the services of online stores, you can choose a score-partition that meets your preferences relative to design, functions, sizes, materials for manufacture and cost. On the sites you can find cheap simple products, which can be found even students, as well as pick up elegant models using rathant or decorated with carvings. The main thing is that the model is consonant with the style of your room.

Many use photos of the Schirm options as an example in order to try to make a unique partition in the room with their own hands. Not only photos of products will help, but also posted on the Internet master classes Shirma with their own hands. Creating this element yourself, it is possible to embody his personal creative idea in it.

How to make a screen for the room with your own hands

The fact that the shirma-partition made by its own hands will cost much cheaper is no doubt, but, in addition, such a thing will have every chance of becoming a real decoration of the room. Make a simple screen is easy, and the fascinating process of its manufacture will bring you a lot of pleasure.

Tools and Materials for Manufacture

A small screen made under the old days, it will be appropriate to look almost in any room. Vintage decor elements have long become an indispensable attribute modern interiors: They create a nostalgic warm atmosphere in the room. In addition, extinguishing the screen, it will be pleasant to sit in the chair for reading an exciting book.

Before making a screen with your own hands, make sure you have the entire necessary tool and material. For the manufacture of a small wooden width partition, consisting of three sections, will be required:

• wooden timing with a cross section of 40 x 40 mm - for the manufacture of the frame, it will take 6 bars with a length of about 2 m and the same elements are slightly shorter;
• fabric cut, preferably dense and light-tight - to fill the screen sections;

• pages with text or verses, carved from books, newspapers, personal notebooks, diaries - to decorate the screen linen. If some tenderlook you will be needed in the future, you can simply make copies for work;

• a solution of tea welding - it will be needed to give sheets of paper aged. It is advisable to prepare a sturdy solution;
• scissors, painting brush, PVA glue, wood varnish;
• hammer, carbon, roulette, screwdriver;
• nails, selflessness;
• building stapler - for fixing the fabric to frames;
• door canopies - you will need 4 small neat hinges for connecting screen sections;
• tape for decoration.

Helpful advice! For the manufacture of frame-partition frames, other materials can be used, for example, bamboo bars, aluminum or plastic profiles.

Sequence of performance

Work starts from assembling framework frames. Bruks need to be adjusted in size sizes and combine into the frame. When bonding bars should be used by the coal to keep the straight angle and prevent sowing sash. Between themselves, the elements of the frame are connected by means of screws or nails. The finished designs are covered with varnish and leave until the coating is completely drying.

The next step will be the connection of the sections among themselves. First, with the help of a roulette on each sash, places for fastening the loops. It is necessary that the distance from the top and bottom jumper to the loop in each of the three sections was at the same level. The loops are neatly fixed with self-tapping screws.

Further, proceed to the cutting fabric. 3 parts of the appropriate size are cut out of it. Before the fabric is attached to Ramam, it decorates it. A tea solution is applied to the prepared paper pages with a brush. Before applying, welding should be thoroughly strain through a small siter. So that the paper after drying is not wrinkled, each treated sheet should try the iron. When all sheets are dried, they are glued to the fabric.

Preparation of paper sheets under the "old"

Each sheet is covered with a thin layer of PVA glue and glued to the canvas. When performing this procedure, you need to ensure that the glue does not flow into the fabric. After that, give glue to completely dry. Prepared fabric fill the screen sections. With the help of a stapler to one of the sides of the frame fasten the web, and then, pulling the fabric, fix it to the rest of the frame elements. The recommended distance between the brackets is 4-5 cm.

If you need to put the coming relatives, to sleep in the same room, find out how to make a screen from girlfriend and quickly make it.

How to make a screen with your own hands - ways

In order not to spend money, make it from the material that is in the presence. If guests arrived at the cottage at the cottage for the weekend, but there is no free room, separate the corner for them using fiberboard or dense packing cardboard.

Making Shirm begins with the preparation of material and equipment, in this case it is:

• fiberboard sheets or dense cardboard;
• small door hinges or scotch;
• paint;
• hacksaw or stationery knife;
• bar and sandpaper or grinding roller.

Consider two options for the manufacture of such a folding wall.

Shirma Cardboard - 2 options

You will do this in an hour if you need to quickly divide the room for two. If you have a box from the TV, it will fit perfectly.

1. The easiest way is to cut the top and bottom (small sidewalls) and remove the place of the first and fourth grain.
2. You will have a large rectangular canvas with three vertical seams. Now you need to bend these seams a little differently: the first and the third leave the same as it was, but the second to exacerbate in the other side. Then, when laying, this temporary wall will be well fixed.
3. The second way is suitable for those who want to make a beautiful screen. The basis is the same box from the refrigerator. Cut it from above and below, so that only big sidewalls remain. You can leave all four or three. Steam parts are identical, relative to each other, both pairs are cut into the mirror image.
4. The spikes of the pattern are repeated, but these slots begin with one, then from the other edge. Match two blanks with solid parties, glue them in these places with scotch. If you have 3 canvases, then there will be 2 seams. If four - then it turns out 3 seams.

Bear the cloth only on the reverse side, then the screen will be well to develop. To decorate, you can paint cardboard or attach a self-adhesive film.

Shirma from dvp.

1. Using a pencil, apply a drawing to the surface of each of the three blanks, cut down all the fibers of the jigsaw.
2. Sharp edges need to be seized, then - to paint each sheet of fiberboard in the desired color.
3. To connect the blanks, attach to each one side from the three loops - at the bottom, below and in the center. The second sides of this accessure are screwed to the second width of the screen. Also join the third workpiece.

The grinding device is quickly done if the bar is crushed by sandpaper and consolidate it on it.

See how unnecessary doors can be turned into this item. Old could remain after repair, they can be found, because people, making the mortgage conversion, get rid of these items. And you will make a wonderful screen. It can be put not only in the room, but also in the garden, separating the corner of the cottage.

From old doors

If they are not in very good condition, then first remove the peeling paint, squeeze the resulting deepening with a putty on the tree. When it dries, slightly squeeze so that the surface becomes smooth. Then pass the primer.

When it dries, cover the canvas with two layers of paint. If it is acrylic, the doors will be ready for subsequent work after half an hour, but it is better to wait an hour.

After that, you need to attach a loop. How to do it is shown in the following photo.

As you can see, two door canvases put vertically on a long sidewall, one side of the loop is screwed to the left door, the second - to the right. But the third workpiece is bonded on the other side so that the result of the assembly resembles the harmonic.

Immediately, do not twist all the screws to the end, you must first align the doors, then secure the screws securely.

The design will be quite heavy if you want to make a light folding wall, then look at another master class.

We make a screen of fabric

As you can see, such a shirma is well addressed and there is little space in this position. To do it, take:

• wooden bars cross section 30x30 mm;
• self-tapping screw;
• screwdriver;
• the cloth;
• furniture stapler;
• braid for risks;
• saw.

Next, follow this plan:

1. Decide with the size of the finished product. If you want in the unfolded form it was a 2 meter high, and the width is about three, then you need to knock down the frame for each of the three sections so that they get 2x0.7 m. To connect two segments of bars, match them, attach the side of the screws, Screw it.
2. Downstairs should form legs. Put on a flat surface two bar 2 meters vertically, upstairs, between them, place one, with a length of 70 cm. Exactly the same need to be placed in the lower part of the structure, but by lifting this bar to the top by 20 cm - such a height will turn out legs.
3. Cut 3 cloth with a size of 187x77 cm in size (2 cm from one and the other side so that there is no cracks in the width, 3 cm - inserts on the seams - 1.5 cm on each side).
4. Turn the cloth from all sides, step up the edging. Surret of the rigors - 4 pieces on top and bottom, 9 pieces from the sides. With the help of them, tie the canvas to the ram. Then it will be possible to shoot the cloth and erase these details. But if you want to use washing canvas, such as Bologna, and so that no one can pry through the screen, then you can attach a fabric to frames with a furniture stapler. If you do not have such a tool, bring decorative nails.

That's how to make a screen from the fabric so that the product is easy. If you want the room to be the object of the situation, similar to an old or position the favorite photos on it, then for you - another cognitive lesson.

How to make a scrome book?

An extraordinary effect can be achieved if used tight cardboard. That's what you need to use with such work:

• cardboard;
• stationery knife;
• putty;
• putty knife;
• cork canvas;
• burlap;
• bachek;
• scotch;
• photos or wipes with a pattern;
• pVA glue;

Determine the sizes of the folding partition. You can make 4 canvases. Put the first sheet of cardboard to the surface. On its top draw the pattern, cut out. You can apply a picture onto everything canvas. For the decor of the outdoor and inner sides, take the burlap, cork cloth, napkins or photos. Make a simple pencil that where you will be located. Cut fragments from traffic jams and burlap, stick them into place.

Take care that burlap threads do not look out around the edges, make them inside the needle.

If you decorate the screen with photos, stick them. If you like a decoupage technique, then remove the top layer from the napkins, lubricate the place on the cardboard, attach these paper blanks here.

When the glue dries, cover 2-3 layers of varnish.

Beautifully look at the other decor elements, similar to flowers. To make them, cut out from the remnants of cardboard billets of such a form.

Lubricate them with glue, ranging from the center, attach the turns of the twine. When the elements are dried, stick them into place.

Collect the walls of the partition, gluing them with scotch.

You can decorate a screen and in a different way, perpetuating on it cut out newspapers, pages of your favorite book. To do this, first make photocopies from them. So that the partition is looked like a relict item, you need to form leaves.

Occupus brush into a strong tea brewing, john the paper. When the moisture remains on it, take them to the shirma from the cardboard, taking PVA. Leave that the product is dried.

That's how to make a screen with your own hands, spending at least a minimum of money.

Such devices are used and when creating a home doll theater. They are suitable for kindergarten. If a child has a birthday, his peers will come to visit, show them a puppet play. It can be a finger theater or characters will be put on hand. They are also simply made with their own hands, like a wall-partition from girlfriend.

How to make a screen for a puppet theater

To make such, in the form of a house, you will need:

• cardboard;
• hole puncher;
• shoelaces;
• paint or colored paper;
• scissors;
• stationery knife;
• line;
• pencil.

Master class of manufacture:

1. Based on the sizes presented, make the side walls, the height of which is 50, and width 30 cm. The size of the central wall is 50x50 cm, it is cut along with the triangular roof. In the center with the help of a stationery knife is made window.
2. Decorate the screen with colored paper or, painting the item.
3. In the side walls, make 2 holes with holes or scissors and four in the central one. Match the notches, connect the parts with the help of cords or rope segments.
4. This shirma is small, it is put on the table. A man sits behind, putting a glove with characters, shows them from the window. If you want to get a few children from behind, then make the walls are higher and wide for the guys can get to the window.

If the presentation of children will show adults, then the screen may be the following.

These same calculations are suitable for the usual screen. If you celebrate a children's birthday in nature, then also include a puppet player in the celebration program. You can make such characters in advance so that they are like members of your family, guests. Stick a photo of each character present on the face of the character, try to imitate his speech. But all this needs to be done so that the guest is not offended, but laughed from the soul.

Shirma is useful in nature and in order for it to be located inflatable mattress and relax. Then see how the shirma-harmonica will be mastered. This consists of five canvases. If you celebrate in the country, use unnecessary doors and loops to them. But these details need to be securely secured on the ground, using pegs and rope, as well as metal pins.

If you wish that Shirma consists of several elements, then make it a team.

Shirma - Volume Partition

To make it, you will need:

• color cardboard;
• stationery knife;
• scissors;
• butterfly pattern.

Applying a template to the cardboard, cut out the blanks with scissors. Then, do in each stationery knife 4 slots - 2 at the bottom and at the same time. To connect the first five butterflies, place one in the center, to the upper slots - on the right and on the left, put on the winged insect. In relation to the main, they will be perpendicular. Also fasten two butterflies below. For the same technology, create the entire score. At any moment it can be disassembled.

If you want to make a stationary screen, then attach butterflies from cardboard to each other, skinning cuts.

You can make a bulk partition and from plastic bottles, cutting butterflies or other figures from this material.

Here's how to make a screen with your own hands using a screw or throw material.

Do not deny yourself the pleasure, conveniently sitting on, see the process of creating such a product in a video.

The next partition is also an organizer. In the pockets sewn to it, you can put various items that will be at hand and are not lost.

• 2. French connected. Shirma may not only be divided, but also to combine. Mounted in a wide simpleness between the windows, it turns out to be in the spotlight, not giving the space to "collapse" into parts. Shirma work Jean Cocteau, a couple of sheep and Pierre's photos and a housing introduce a fairly conservative interior of this bedroom an element of artistry.

• 3. Collected Works.Decorating with shirms with painting - a long tradition. Such an object is able not to simply simulate space, but also to fill it with a new meaning. For example, with the help of a screen depicting racks with books, it is easy to turn any room into a reading room. And at the same time emphasize that the owners of the house - people are intelligent and not indifferent to the printed word.

• 4. Open book.In order to study in detail a skillful painting on the sashs of the Japanese screen, it is required to place it at the eye level. To do this, you will have to either sit on the floor, or hang a screen on the wall. The plot must be "read" to the right left. It is advisable to muffle the light at the same time - after all, twilight reigns in Japanese homes. Then gold on Shirma will flicker, and not shout, and the paints will become soft and refined.

• 5. Third way.This semi-empty hotel interior, weathered in neutral color gammaThere was every chance of becoming one of those transit zones that do not "cling" the eye. The situation saved Shirma, thanks to which the premises acquired a new dimension. Of course, we are not so naive to take painting for the real landscape. And yet urban streets leaving in Perspective, unwittingly suggest on reflections: where to move on - right, left or straight?

• 6. Hit full!To fulfill its primordial destination - to intrigue and hide - such a screen will not be able. But thanks to her in your bedroom, there will be no surveillant corners that need to hide from prying eyes. For greater practicality, you can insert a mirror in one of the beds of such a mini-dressing room.

• 7. Divide and conquer! Make the kitchen isolated or combine it from the living room? Truth lies in the middle, and her name is Shirma. For example, the owner of this Paris Loft uses the Claustra Rarity Score, invented in the 60s by Brothers-designers of Clawing in the 60s.

• 8. Feed from the corner. This angle is a typical "dead zone" - the approach to it is blocking the armchairs and a table by the fireplace. Shirma not just "justifies" the existence of this noise. Its mirrored flaps reflect the light and visually expand the space. The only problem - Shirma is close to the head of the bed. Think carefully, whether you will arrange such a neighborhood: admire the in the morning of his stayed physiognomy - the entertainment is not for everyone!

• 9. Holy place. The eternal problem is how to use space under the staircase - Kelly Hoppen designer decided with the help of shirma. Openwork design of black lacquer rings has become a background for a yellow "eared" chair. However, in this interior, Shirma solves not only decorative, but also spatial tasks - serves as "watershed" between the dining room and the sofic zones.

• 10. Reliable rear.Sit back to the door or the window is extremely unpleasant. In this interior, the problem is solved by the screen, forming a niche like and a giving a sense of security. I can not even believe that before us is not a cozy ancient mansion, but a modern open space.

• 11. On times, about moral!Since the screen has first got into Europe, the interest in them was faded, it flared up. Another splash happened during the time of the village of Deco, when shirms made using varnish, metal and glass were included. In the photo - a typical representative of that era, although it is not antiques, but a skillful stylization. The author of the facility is a modern American designer Thomas Fisint.

• 12. All intensity.Sometimes the screen takes on the role of architectural elements (such as columns, niches, etc.), changing the proportions of the room and adjusting to the solemn way. Installed on both sides of the bed, they form Alcov.

• 13. Up to 16 and older. As they say, comments are superfluous. Before us, the object is useful in all respects. It remains to add that such a screen will be useful not only in the nursery, but also in the office or, let's say in the kitchen. If you do not like the chalk (after all it cries), insert a magnetic board with a special coating into one of the flaps with a special coating on which you can write markers.

• 14. All head! Shirma often acts as a head of the head. Here this idea is brought to its logical completion: the sash is covered with the same cloth as the porcelain of the bed and the upholstery of the chair. But you can do otherwise - play in contrast by making a screen with a central element of the interior.

Teach the theory

Aks to the question of how to make a screen with your own hands, we can say that in the general It looks like this: it is necessary to make frames, then stretch the material on them and connect the frames with the help of loops so that the shirma can be folded. In this case, the width of each linen of the screen is about 50 centimeters, and their height is approximately 170-180 cm: it is when observing such sizes with this element of the interior will be easily and pleasant to use.

It is also worth noting that the classic shirma, as a rule, should have three or four separate parts that it is customary from the cloths of the same size and drawing. To create a screen with your own hands, you have more likely to be needed by the following tools: wood-hacksaw, drill, pliers and pliers. If you complain about creating a model using metal structures, then you will need a metal knife and a welding machine.

We try in practice

In order for our conversation with you about how to make a screen with your own hands, has acquired a specific character, you can record the "recipe" of its "preparations". So, you will need 6 brucks of wood having a length of about 2 meters, and 6 shorter bars from which the width of the screen will be folded. You will also need to purchase a fabric of any colors you like. It should be repeated from the place where this screen will be. For example, for the children's room, you can choose more fun and bright fabric, which will create a playful mood at the kid.

In addition, to create a screen with your own hands you will need to cook 4 door hinges: if your accessory will have three sash. Also, do not forget about the painting tassel and varnish that you will bring in the "order" of the screenshot. It is worth noting that when performing this work, you should also not do without nails and hammer or self-screws. At the same time, some experts use a stapler for furniture and various elements of decorative finish.

The technique of work will be as follows:

1. You need to create a frame of bars. To do this, we make 3 wooden frames, and then fasten them with each other screws.


2. With the help of door loops, the frames of each other. In order for the basis for the screen to be fully ready, cover it with varnish and let it go well.


3. We reproduce the fabric of the desired dimensions, leaving 2 cm from each edge to the bending. Then the resulting billets gently stretch on the frame and nail the stapler for furniture. It is very important that the fabric is stretched strong and smooth. If you wish, you can decorate the resulting score by any elements of the decor.

Otherwise, the screen, made with their own hands, is ready and can be put in its place and enjoy it with beauty and solitude.

________________________

Shirma - partition is a fairly interesting and universal decor element, thanks to which you can easily zonate the room. Therefore, if you would like to create separate zones in different rooms, then boldly begin the manufacture of the screen - partitions.




Such a home screen - the partition is quite easy to manufacture, just prepare everything necessary materials and tools.

. Wooden bars 2 m long, 6 pcs;
. Wooden bars in the width of the room (measure the width of the room, dividing 3) - 6 pcs;
. Covenate of dense fabric (coloring choose your taste or to the tone of the interior);
. Brush;
. Door loops - 4 pcs;
. Varnish;
. Furniture stapler;
. Glue;
. Self-tapping screws - screws;
. Nails;
. A hammer;
. Decorative Tape

Instructions for the manufacture of shirma - partition

1. To begin with, you need to make a frame for shirma. We use prepared wooden bars. From the prepared bars you need to prepare 3 wooden frames, connecting the bars with each other with screws.
2. Frames connect door loops among themselves.
3. With the help of a tassel, open the frames with varnish to impart brilliance.
4. From the prepared tissue cut 3 cuts for each frame in accordance with the size of the frames.
5. Each of the sections of the tissue are glued with glue to one side of the frames, then fasten the brackets using a furniture stapler. Next, pull the tissue, and fasten the brackets on the other side of the frame. Make sure that the cloth is naked smoothly and symmetrically.
6. The front side of the screen - the partition is ready, now it is necessary to aesthetically arrange the inner side of the screen. To do this, use the prepared braid, which is carefully shoved on the edge edges of the fabric.
After that, all the main works are finished and your screen - the partition is ready for operation. Optionally, you can easily issue a screen, decorating it with appliques, original inserts and photos.

We are confident that Shirma is a partition made by hand, will become beautiful decoration Your housing. Creative success and good mood!

___________________________

Theme of this article - Shirma do it yourself.

As I said in my article, you can zonail the room different ways. Including with the help of shirma.

This is a very convenient option that allows you to change the space with the speed of light! Especially if you have a few shirm of various design (or the basis of the screen is one, and the panel (filling) is different). After all, the mood also happens different - and the world around must change accordingly!

Panels can be made of fabric, wood, plastic, stained glass.

Early in the design screen is needed not only from the style and color of the interior, but also from the functions that our shirma should perform. If it is necessary to tightly extinguish some part of the room, then you need to choose less transparent materials. It can be a tree, an opaque plastic, an opaque fabric (or light, but very smallest), possibly stained glass window.

If you only want to visually separate part of the space, you can restrict ourselves to transparent materials or even make a screen with decorative holes.

And if you need, the screen can safely set up in the angle and release space, for example, for a party!

Make a screen can be completely calm with your own hands. In addition, you will know exactly that such a screen as you have no anymore! Thanks to this manual, you will make it simple enough!

If you have children - this is a great opportunity to connect your child to the creative process of creating! Everyone will be fun and interesting! The main thing is to connect a little imagination!

You can safely use almost everything that you can find at hand: bright colored fabrics, old broken hairpins, skin pieces (you can cut out of the old bag), beads, beads, paints, various ropes, drawings of a child, photos, etc.

And if you feel the strength to do it - go ahead!

So, for the manufacture of a wooden frame, we will need the following tools and materials:

1. Directly the wooden planks themselves (we recommend to take pine width 6 cm, and about 2 cm thick). There must be 24 pieces: 1.70 m long - 12 pcs., 0.6 m long - 12 pcs. (or take 6 pcs. 1.2 m).
2. Designed for a screen with three sash.
3. Simple pencil with a square.
4. Glue joiner with painting tassel.
5. Varnish for wood.
6. Sandpaper.
7. The chisel is thin.
8. Joiner's vice - 4 pcs. (It is smaller, but then the process itself will take longer).
9. A hammer.
10. Hacksaw.
11. Tree screws (D \u003d 3 mm, length can be taken 13 cm). Approximately 100 pcs.
12. Screwdriver (if any).
13. Steel corners - 12 pcs.
14. Loops - 6 pcs. or 9 pcs. (depending on the type of loops)

First.

So, we take our wooden planks, retreating on each approximately the edges of the edge from two sides, mark the line, parallel to the edge of the plank.

Note: These lines must be on one side of the bar.

Second.

On these lines, we wriggle with hacksaw until the middle of the thickness of the plank.

Third.

We take the hammer and a thin chisel and do the words (we remove the tree about half of the strip thickness) to the lines marked and inscribed.

Fourth.

We take two long strips and two short, we apply glue to the inner part of the wrist and collect the frame. The places of the globe clamp the joiner's visits and wait until the glue is dry.

The same makes the same with the rest of the planks.

Fifth.

It is necessary to polish the resulting frames with emery paper. Then cover them with a varnish for wood.

Sixth.

Now we take the corners and fasten our frames in the corners.

Shirma is a detail of the interior, which is used for various purposes, most often for zoning space. Today, such shirms have somewhat expanded their sphere of use. You can install an attractive door to the veranda or in the dining room, arrange a comfortable and quiet place for reading and homely needlework.

Flexible and Single Designs

Modern flexible designs are multifunctional. They can be used not only as a convenient partition, but also as the original door to the veranda, in the living room like unusual element General interior decor. With such a flexible screen, which can be bent into any direction, zonaps a place for reading or work. On an open veranda, such a design will serve as excellent protection from the bright sun or light breeze.

Often, design with sash applies to design interiors. It consists of several individual elementsrevealing due to the installed loops. The size and number of sash can be different - it all depends on the appearance and style. Such wide serves excellent decor element. Single screen screens are rare, they are intended for wardrobe. The design consists of one large sash screen, reinforced on the frame. It looks much easier than the options listed above.

Back to the category

Rama for Shirm

For the manufacture of durable and reliable design, it is necessary to carefully approach the choice of frame. For the classic option will fit wooden Rama with individual flaps. Material for work is selected based on the size of the screen. For example, if the shirma door is manufactured with a shearing of wooden carved panels or stained glass, it is best to take wooden bars for frames. They will exceed a great weight of the design.

Wooden rails are used in the event that light fabrics are used for trim, cardboard, rice painted paper.

Today are wide scores with a frame of the lightest bamboo, vines. For Shirm B. modern style It is best to use metal aluminum and light steel frames. They look great with transparent panels from polymers and glass. If you wish, you can install light sources in the form of LED tapes on the frames.

Back to the category

Vine or textile?

Shirma flaps can be made of the most different materialsThe choice in the stores is chic, so without buying, even the most arrogant decorator will not go. Before going to the store, you need to decide what the design will be: transparent or deaf, combined type. In many cases, unusual coatings are used with slit silhouettes, narrow slots, perforation of different shapes.

Construction scheme partition-screen: A, B - appearance; in - device and frames of the frame; G - carriage.

The deaf shirma is a classic option with opaque sliding flaps. Often it is a door installed in order to effectively split the space of a large room. For the manufacture, dense, opaque materials without slots are used. Most often it is textiles with a beautiful and unusual pattern. Each shift door is tightened with tight silk, sint, atlas, carpeted and tapestry fabrics. It turns out original and luxuriously.

If the screen will be used as a door, it is best for the sash to use thin wooden panels. In this case, it will be a reliable and attractive partition between the rooms. If desired, it can be completely removed. More often such an option is used for dining rooms and living rooms, for dressing rooms and bedrooms. The surface of wooden panels is recommended to decorate carvings.

Screens that are trimmed with cardboard are usually used to fencing space. This is most often partitioned for wardrobe. They have a slight weight, easily fold and unfold. The surface of the Cardboard is usually painted with paints, it can be decorated with fine tissue, colored paper. But the strength is such a shirma door has a small, sometimes it is just an elegant detail of the interior.

Transparent Screens are used more for decorating. Their covering is made from materials perfectly transmitting light. Usually it is thin translucent and transparent fabrics. Today apply and more modern materials - polymers and glass. Beautiful shirma door from stained glass will be the highlight of the veranda or living room, a large dining room, but its weight will be significant. This should not be forgotten when the frame is for the design.

Shirms whose flaps are considered unusual and beautiful are decorated with sisal screens, natural wicker vine. Such structures skip light, differ in low weight and air industry, most often they are decorated with vegetable ornaments. Designed such designs for bedrooms, children's rooms.

Back to the category

Decorative elements in decoration

To make an attractive and unusual screen with your own hands, it can be decorated with various decorative elements. Use for this weaving, floral elements, glass beads. In some cases, instead of tissue for upholstery, beautiful dense meshes and weaving from ribbon, beads, rhinestones are used. Fabric screens are usually painted with acrylic paints. In this case, the drawing can be additionally decorated with applications, separate floristic elements. For fixing accessories, glue perfectly.

The use of such decorative techniques allows not only attractive, but also convenient. Wicker structures have low weight, they are easily rearranged to another place. It is advantageous distinguished by decorative scrolls from classic wooden, covered with cloth.

Back to the category

Mounting shirma

Beautiful and comfortable Shirma is able to decorate any room. This design is quite simple to collect yourself. To make a classic screen with your own hands in the form of folding flaps from the fabric, you need to spend just a couple of days. The longest process is paint drying.

To make your own hands a classic sliding screen with an upholstery of the fabric, it is necessary to prepare the following materials and tools:

• subframes made of wood in the amount of 6, 8, 9, 12 pieces (depending on the number of sash). Subframes are proper in the form of convenient rectangles;
• to make a screen, you need a dense fabric for upholstery. It should have a beautiful and original ornament. Calculate the metrar of such a fabric simply. It is enough to take into account the size and number of subframes, calculate the total area of \u200b\u200bthe tissue, adding 3 cm per battery on each side. If a complex form frame is used, then you will have to pre-draw a sketch according to which the fabric will be painted. Consumption directly will depend on the type of pattern;
• dense tape for the edge of the fabric. How to calculate its length? It is necessary to simply learn the perimeter of each subframe, multiply by the total number of sash;
• construction stapler for fastening fabric;
• card or piano loops that will be attached to the edges of subframes. As a result, all the flaps will be able not only to develop, but also turn into any direction. Such loops on the subframe are attached with self-drawing;
• drill, nuts, self-assembly for assembly;
• glue for braid;
• oil or acrylic paint for wooden surfaces. You can use regular lacquer instead of paint, the selected shade of the selected shade.