In the search for what is most often a person before leaving the house? It may be a mobile phone on which you have to call from another or home. Points that are forever somewhere hide. Well, the most important thing is the keys. It is their loss that causes the greatest stress when the meeting remains a few minutes. So that all these things are always in sight, it is important to know how to make the key to do it yourself.

What it can be

The key is a small device, the design of which is limited only by the creative abilities of a particular person. She may be:

• Wall. It is usually closer to the eye level to always be an accessible out. It may have in its design hooks, and a more creative method of fastening a ligament can be applied.
• Pocket. It is a small wallet, in which the keys are hidden. Such a product is useful because it makes it possible to exclude the appearance of scratches on any gadgets, as well as prevent the appearance of holes in pockets and bags.
• Desktop. In this case, it can be made in the form of a small box with attractive patterns. In order not to forget to put the keys in it, they put on a special key chain.
• Place the door of the locker. Many near the exit is set by the truma. Why not use the inner surface of the door with a greater benefit.

This subject does not necessarily have only habitat of keys. Additionally, it can be adapted for business or other notes. Special mount will be useful for glasses or mobile phone. In addition, additional shelves will allow not to forget where the last time the brush and the shoe cream was left. Also here can be stored portable drives (flash drives), well, or the lids from them, which certainly strive to go somewhere. If the wall keys are located close to the door, then it is better to provide additional levels of protection, so that no one, while looking at the hand, could not take hold of a bundle.

There is a huge amount of finished options. They are developed taking into account the place where they will be used. For office or other companies make metal products that have a built-in castle. Hotels boast decisions that are created for a specific interior. Warehouses are not sophisticated, but are designed to perform their main function, and not please the eye. But repair of the house or apartment is the reflection of the inner world of its inhabitants. Therefore, it requires an individual approach.

Variants of wall keys

In hand creative man Any little thing can become an element of design or decor. For the manufacture of the simplest option, you will need:

• the branch of the intricate shape;
• metal hooks;
• self-tapping screw;
• dowel.

As the first element, a good solution will be the bitch from oak, larch or other wood, whose wood is characterized by high strength. But it is not fundamentally, you can take what you like most.

• Entry paper tree is shattered. If possible, the bark is considered. This must be done, because It may start unpleasant neighbors that cut wood.
• With the help of a drill, several holes are drilled. Everything will depend on how many key ligaments are in the family. The diameter must be slightly less than the diameter of the hook thread. Two more additional will be required for mounting to the wall.
• To give the desired tone, the product can be covered with mourn. After complete drying on the surface, it is worth walking in shallow emery paper to remove the risen fibers.
• The next step is behind the varnish. He will give the suspension complete appearance. You can use both matte and glossy, everything will depend on what better suitable To the interior.
• The element is applied to the wall, and marks for mounting for mounting are made.
• The perforator is prepared by holes, dowels are inserted and the key is screwed into place.
• Hats of self-tapping cuts. You can decorate them with lining or putting on wood.
• The last stroke will screw the hooks and hanging bundles of keys.

Such an option will be excellent solution For baths, houses from a church or log. Well suited to the interiors, where a tree was used when finished. Additionally, each hook can be marked with some symbol. Their application is carried out by an electric dear or other way.

Most at home has pictures with photos. Some of them may have been dusting for a long time on the shelves, since they are nowhere to put. There is an advantage to breathe in them new life. This will also be needed:

• glue;
• a small piece of plywood or fiberboard;
• decorative hooks.

If the appearance of the frame is not much like, then it can be stuck and painted in that color that suits best. Plywood or fiberboard is adjusted under the dimensions in such a way as to fit on the protruding sides of the frame. Additionally, this element can be covered with any cloth. In this case, you will need to make a gap of several millimeters on each side. The case is fixed with glue. They are also attached hooks to the surface. The last stroke will install on the wall.

In another embodiment, you can not use sheet material to close the frame. Enough after it is processing into the inner top end, spin the hooks and additionally decorate them.

If you have skills to work with a logged hand saw or electric, then you can implement another unique project. It will take:

• plywood segment with dimensions of 25 × 15 cm;
• morid or paint.

Before the start of manufacture, it is worth thinking, in the form of what I would like to see key chains. This can be a figure of a boy and a girl, circles of various diameters, figures of objects to which the keys are. Next, you can find a suitable simple drawing on the Internet or draw it yourself. Thereafter:

• Overtakes are processed. The chamfer and the corners are removed. Make it can be manually emery paper or with grinding machine.
• Drawn or printed picture is applied to the plane. It is necessary to do this so that its lower part coincides with the lower edge of the workpiece.
• Image handle or pencil is transferred. It can be simply transmitted by a suitable metal object.
• The lines are supplied so that they are clearly visible.
• A manual or electric jigsaw, which is installed with a small tooth, cuts on the intended circuit.
• Figures are postponed to the side.
• The main sheet is cut by 5 mm from the bottom end. It is necessary that the key rings are a bit performed.
• The surface of the carved products is grouped to remove all chips. Holes under the rings.
• Optionally, the surface can be treated with varnish, paint, mourn or make some pattern with the help of the dear or cutting knives.
• The product is screwed to the wall.

Such a key can be adjusted for each family member. For example, for dad and moms are made of larger key chains, and for smaller children. Each of them will have its own place and no longer will be lost.

Another one interesting decision There will be a key of a small bar. For work you will need:

• bar 25 × 8 × 3 cm;
• facial circular saw or jigsaw;
• vice or stand in which you can withstand angle of 45 °;
• metal or wooden blanks.

Wood is well processed using a grinding machine or other device. Corners can be rounded a little, but it is not worth overdoing, because The product will lose its appearance. Then every 5-7 cm are made transverse lines. Over these tags are carried out in 45 °. They must be up to the middle, otherwise the design simply will lose their strength. The bar is fixed on the wall so that the slot go down. For each key bundle, a small metal or wooden key chain is made. In shape, it can be anyhow, but its thickness should coincide with the width of the cut. When the keys are no longer needed, the keychain is simply inserted into the slot.

From keyfobs you can refuse. Then the slits can be made of this size so that one of the keys are swam. It will be enough to insert it into place and everything is ready. The slots do not necessarily be at an angle. It is possible to arrange them and completely horizontally.

Other an interesting option There will be the use of small furniture locks. They can be purchased in any specialized store. Their number must correspond to the number of family members. Additionally, you will need:

• wooden bar;
• finger drills;
• screwdriver;
• sand paper or grinding machine.

The bar must be such a thickness so that the inner part of the castle can fully fit in it and not look out. Finger drills will be needed two sizes. The first must correspond to the diameter of the core, and the second is the diameter of the clamping nut. The tree is processed as desired so that the form and configuration of the final product approached the existing elements in the house. Marking is carried out. In this case, it is necessary to take into account the width of the facing ring. The lesser diameter feather drill is drilled with the front side. Talking the lock. With the help of the roulette, the thread length is measured for nuts. From the opposite side to the depth of a little less threaded, the hole is drilled by a large drill. It is necessary to drown fastening element. The design is fixed on the wall. Each keyhole is signed or highlighted in a specific color.

The original decision can be the use of decoupage techniques. In its essence, it represents the process of decorating various surfaces like a pattern or picture. For the entire operation you will need:

• any wooden billet;
• napkin or rice card with a pattern like;
• pVA glue;
• acrylic lacquer;
• acrylic white paint.

The surface is well cleaned and polished. Next is preparing a background for applying the desired image. For this, the facial side is painted with a white composition. After drying the first layer, you must apply one more. Thus, it will be possible to hide all the flaws. From the napkin or rice card, the desired area is broken. Either the edges are simply broken up so that they are not smoothly cropped, since it will not look so attractive. The drawing is placed on the middle of the prepared surface. A large tassel applied PVA glue. Starting from the middle and move to the edges. It is in this case that it turns out to be well smoothed paper, as well as remove all air bubbles. The glue must be seized and dry. If the edges remained empty, they can be reappeted. Selected painting composition In the tone with the overall picture. A small piece of porporal washcloth is cut and clamped into the clothesp. The device is foaming into the pigment, the surplus is removed and rushing in the intervals where there is no lining. The last stroke will be a protective varnish. It is applied with two layers. To make it easier to see oscillates, it is enough to turn the plane to the light. After drying, it will be necessary to walk in shallow sandpaper to align the shortcomings. Hooks are selected at will.

In addition to open options, it is possible to make a secret, which will be hidden by a picture or other decor element. To work, you will need a small wooden box. You can take any of the cigars, creams, the old casket is also suitable, which is no longer used for its intended purpose. On the top of the cover mounted frame with some beautiful picture. The wall is deepening. If it is plasterboard, then it will be enough to cut it on the desired size. In the case of a concrete wall, it will have to be a little tinted. The contour is cut with a grinder with a diamond circle, and the rest is knocked down by a perforator. The main compartment is placed in the middle and secured by self-draws and dowels to the wall or spacer mechanisms for plasterboard and the crate. For the main cover, you will have to choose a loop that would allow it to open with it with the picture frame. Hooks are made inside. If you do not show anyone, it will be difficult to guess what kind of drawing or photo is hidden.

If there are children in the house who love to play in the LEGO constructor, then some of its parts can be used to fix the keys. For this, a single plank or a small module is perfect. It must be glued to fasten onto the wall. A small brick will be used as a keyfob. There are ready-made elements in which holes are already made. In case of their absence, they are easy to drill or relax a hot seer or nail. When you want to leave the keys, you need to attach part on the fee.

The variation on the topic of LEGO will be the use of men from this designer. It is necessary to proceed as described above, but the figures for the bar is better to glue. Hardly fix your hands. The ring is inserted into the palm or just hanging on the forearm. It looks pretty - it seems that the designer asks not to forget the keys to the house.

A convenient and unobtrusive option will be a unique design that will allow you to hang the keys without even looking. For the implementation of the idea it will take a metal magnetic plate. These are usually used for knives in the kitchen. It is enough just to choose a comfortable place near the exit, fasten it to the wall and use. The more keys not from non-ferrous metals, the more reliable the bunch will hold.

Do not limit yourself in terms of materials used. For example, do not buy ready-made hooks. If the house remained an unnecessary keys from the old castle or apartment, the holes in them are perfectly suitable for fastening with a self-tapping screw to the surface, and the hound ends will be for hanging. Forks can be used for the same purposes. IN aluminum products Teeth bend in such a way as to get a greeting gesture with two raised fingers or branches curly plants. Small wooden bones, glued on the base, will also perform as holders.

A beautiful solution that will be suitable for almost any interior will be the use of beads or wooden balls. To perform work, you will need:

• balls of various sizes in the number of ligaments;
• small wooden bar;
• durable thread or chain.

In the balls are done through holes. Through the holes are the rope or chain. Its end is fixed with a smaller bead or a beautiful nodule. The second part is attached to the ring. In the processed bar, transverse slots are made and it is fixed to the wall. In order to hang the product, it is enough just to turn the thread into the slot, the balls will not give the bundles to fall out.

You can add any key using a small drawer that will serve as an organizer. You can buy it in the store where home apparel is sold. Often their purpose is to store clothespins. He is also easily going out of small planks of plywood. Such a product will be an excellent device for mobile phone or glasses.

It is much more convenient to carry things with you when they are neatly packed. The pocket key is not only a functional accessory, but also part of the image of its owner. It can be performed with any pattern or be with the namesmable coat of arms and initials. All this is really done independently. For one of the common options, you will need:

• skin flap with a size of 16 × 10.5 cm;
• rivets for skin color;
• riveter;
• tURNING TURNING WITH CARABINS;
• scissors;
• punch.

The key will look prettier if its edges round. To apply markup, you can use the cover from the bottle, the key from the intercom or something suitable. Next, the actions go in that order:

• A blank with carbines is applied to the intended place of installation.
• Tags from the holes are transferred to the skin.
• Inside the bundle with keys and the edges are wrapped. This will allow you to try where it is necessary to set rivets so that the product is closed. The corresponding mark is made.
• The space that is under the keys is made of a lining of the same skin. This will strengthen the rear wall and prevent its wear.
• For applied labels, the hole is made by holes.
• Rivets fixed the workpiece, and then rivets are attached to the weapons.

An additional highlight will be a line of contrasting thread, which can be done with a small indent from the edge.

Another option can be made on the principle of the multitole. In order to determine which particular skin piece need, you need all the keys to assemble in one pick up and copold them with something. It will be necessary to attach them to the material and make the mark of the width with a margin of several millimeters. Next, the sociuses are made and marks are applied. One of the sides remains open, and the retainer is a strap. The essence will be that the keys will be in the case, and you can remove them on the principle of the perico knife. Of the additional components you will need recordings and furniture fasteners. The latter is usually used to fasten the cabinets located nearby. It is a threaded bolt that enters the tube. Hats they are made equally.

• In places where the keys will be secured.
• The elements are stacked in place, small leather gaskets are located between them so that they do not rub and rank.
• Furniture fasteners are inserted.
• In the strap and on one of the sides are fixed rivets.
• The lower part is set by the lover, to which you can fix the keychain or something else.

Someone prefers a key in the shape of a wallet. To do this, a piece of leather is selected, zipper is selected in it. Ends are sewn. Inside the small braid is mounted with a ring or carbine. The bunch of keys is hanging on it.

Desktop key

Desktop key is very often located on the truma. Installed in the most prominent place to, go to the apartment, without looking at throwing keys and do their own business. In her role, you can use any small saucer or packaging from jewelry. Exist ready solutions In the form of products in the form of a shell or small lockers.

As you can see, wooden key keys or metal are an affordable solution. You can make them alone using what is at hand. Many of the solutions can be used as a basis for their own research. We are wondering what ideas you have. Share them in the comments to the article.

Video

How to do beautiful key Japanese-style tree:

Master class on the manufacture of a pocket key:

Photo

Useful advice

If you want your keys always in your place, and you did not lose them, then perhaps you should think about the key.

Some keys can be made with your own hands, and others acquire.

Here are the most original keystones that will suit anyone who wants to have order in the house and who welcomes original ideas:

Keystone (photo)

1. The clavicle in the form of honey cells.

For labor bees, this ecologically secure keyboard contains five magnetic hooks that are gently attached to their places. Material - bamboo.

Wall-mounted key

2. Lego Klyuchant.

Children, Loego lovers, and anyone will appreciate the convenience of such a key. You can attach any detail here to improve the key.

Keystone from a tree

3. Kochist of squirrels.

If you are lucky enough to find suitable wood, then you can make a key out of it, having screwed the hooks and attaching it to the wall or simply putting it on the floor or on the table.

Here is another closer option from Koryagi

The key to the hallway

4. Klyuterna, as in an old hotel.

The design is simple, but tasteful. He will return you back in time with its vintage view. You can add a number for beauty or registered shortcuts.

Keystone on the wall

5. The key to the door handle, as in the book "Alice in Wonderland."

These handles are made in style door handles 19th century. They were carefully painted and to attach real keys to them, keychain keys were made, which are inserted into the "lock". Handbags can also be hung on such handles.

Wall-mounted keyword

6. The key to the nautical theme.

Keyman house

7. The keystitch in the form of a garage.

This key is similar to the previous model, only instead of the shelves - a small garage, and instead of ships-key chains - a minibus. This key can also become an excellent gift.

Keywords: master class)

8. The key to the tennis ball.

You will need:

1 Tennis Ball

Stationery knife

Superfloa or suction cup

Shilo, big nail, screwdriver or other sharp object

Toy eyes (optional).

1. Make an incision ball in the center, using a stationery or ordinary knife. Be careful, as the tires in the ball are dense and the sharp object may damage.

2. Opposite the door, make a shill hole for the suction cup. If the ball is simply glued to the wall or chalkboard, then in this case you can no longer remove it.

* You can glue toy eyes for beauty.

How to make a key of a tennis ball (video)

Keychable for home

9. The keystitch in the form of piano.

Keychains are made in the form of black keys on the piano, and the keystone itself in the form of white keys. Black keys are attached to white. In addition, each "black key" is a whistle.

10. Klystone in the form of peacock.

When you insert the key in this toy peacock, it reveals the tail.

Wooden key

11. Romantic key.

Among the incorrigible romantics, there will probably find those who want to go to the house such a key. Keychains in the form of wooden men (he and she) are attached to a wooden house with a heart in the form of a heart.

Sleeping key

12. The keystitch in the form of a fun face.

It is suitable not only for keys, but also for glasses that are put on the "nose". Such a key must not be attached to the wall, it is enough to put it on the table and hang the keys on her mustache.

Metal key

13. The keystitch from the wrench.

Such an invention will be useful not only for storing keys. You can use this intended wrench at any time.

Wall keller (photo)

14. Keystone in the form of a crocodile.

Just glue or attach this crocodile to any surface and hang on its mouth keys and put various trifles.

master Class

Wall keyword with your own hands ... The hallway also requires decoration. Excellent decorative element This premises can be a wall keyword with their own hands. Make it quite simple, and materials for wall key Load in any house. We offer to make a key, imitating a brick wall.

Wall keyword with your own hands: step-by-step master class with photo

So, the master class on the manufacture of the key on the wall requires the following materials:

1. Thick cardboard;
2. Nice photo or picture;
3. A small piece of wallpapers (optional);
4. Paper napkins white color. You can take a lower layer with multi-layer colored canteen napkins;
5. PVA glue;
6. Acrylic and watercolor paints;
7. Acrylic glossy colorless varnish;
8. Four little carnations (for attaching a wall key with their own hands) and stationery nails as hangers for the keys themselves);
9. Tassels, scissors, simple pencil, line.

So, how to make the key with your own hands.

Cut the rectangle from thick cardboard. Its dimensions coincide with the size of the finished product.

Our cardboard has a not very attractive reverse side, so we decided to take it with wallpaper. From a piece of wallpaper, we cut a rectangle, greater main cardboard on a centimeter on each side. Purchase your cardboard.

Now we will define the picture. We found in the magazine photos with the type of Edinburgh.

Cut.

From the cardboard we cut many small pieces. These are future bricks.

We stick into the center of the base the picture and begin to shock it with bricks. Bricks can be glued at least on PVA, even on the usual adhesive pencil. Bricks must have gaps among themselves. Bricks should be uneven and put with a shift (i.e., as they lay out the real brick wall).

Fill bricks all the space around the picture.
Bricks are slightly entering the picture, and in some places, on the contrary, do not get to it.
We take PVA and a brush and begin to abundantly cover bricks with glue.

We cover the smeared with a napkin and a dry brush on a napkin. The back side of the tassels are watched the gaps.

So gradually glue all the bricks.
The edges of the napkin on the outer perimeter are cutting and wrapped with glue so that they stick to the base.
Now we wash the entire surface again.
It is necessary in order for the product to be durable.
Now our brickwork needs to die. It will take at least 12 o'clock. This will look like a product after 12 hours.
Cardboard has become a bit harder.
We start painting bricks. First, paint only bricks in terracotta color.
We used the usual watercolor for children's creativity. There was just the desired color, so I didn't have to mix anything and invent. We try to make watercolor not very liquid. Those. The brush is slightly wetted with water and firmly loose in paint.
Paint dries very quickly. Now draw the extender. For this we used the gold acrylic paint. Draw only seams between bricks. So that the bricks are not monophonic, tap them with a tassel with gold paint and smear the sponge.

The same gold paint paint free space near the picture. We leave until complete drying.
Acrylic paint dries very quickly, so after 15 minutes after 15, the product can be covered with varnish. Clean wide brush will apply acrylic varnish on the entire surface (including the picture).
Varnish will not only give the key gloss, but in the future it will protect the paint from burnout and contamination.

And so the wall key, made by your own hands, will look on the wall.
We beat the key to the wall with small carnations. They took the stationery nail and painted it in golden color. Dali dried, and knocked into a key.
Hats of nails that knocked off the product to the wall, also painted gold.

Of course, the keys hanger can be made from different materials: Ceramics and metal can be decorated in decoupage technique or paint. You can make the keyboard keyboard - in the technique of scrapbooking. We have conceived a hanger, which would like travels and at the same time was an extraordinary and functional framework. For the manufacture of the key, we used a wooden board and a favorite photo.

WHAT DO YOU NEED?

Materials

• wooden board 40 x 20 cm, 1.5 cm thick
• photo 15 x 20 cm
• hooks 4 pcs.
• watercolor paints
• acrylic matte varnish

Instruments

• lobzik manual
• drill
• nozzle on a drill pin of nylon
• brush
• sandpaper

Watercolor paints We used exclusively in a small craft intended for the use of the house. It is more correct to make wood with morlogs.

Description:I imagine the autumn decorative key performed in the decoupage technique.

Step-by-step key manufacturer

1. Materials and tools: A plate, a napkin with a suitable image, PVA glue, sandpaper, scissors, brushes.

2. Prepare the surface. Oktrinate the smell of sandpaper, coated with acrylic soil. We choose a napkin with a suitable motive.

3. Cut a fragment of napkins in size.

4. Remove the extra 2 layers of the napkin, and with the help of PVA glue, we glue to the surface (decoupage technique).

5. After drying the adhesive, on the crown of the tree with the help of a masticine we apply a putty for the volume of leaves. Instead of putty, you can use a structural paste.

6. From another napkin, cut out the same motive with the image of the crown and glue, closing the applied volume with the help of PVA glue.

7. Cover the foliage, additionally betraying the volume that simulates gel pasta.

8. After drying, the paste becomes transparent.

9. On the ends of the future key, we glue the golden potal, then the image is fixed with acrylic varnish 1-2 layers.

It remains to attach hooks and use. Now the keys will always be in place!

Very original keystones are obtained from a conventional frame in which the keys perform the role of the picture. Of course, the frame should be decorated with thread with twisted elements, perhaps with gilding. In general, the frame should be in itself the work of art.

How to make a keys from the branch?

A very unusual decorative key will succeed in conventional squigs or thick branches. Do not rush to laugh. This beauty may look like this:

The cost of such a key is minimal, the material is environmentally friendly, and a funny bright decoration will raise the mood before leaving for work. True, such a key will look only in a well-lit room.

On the example of the key, you will see how to make imitation brick masonry From cardboard. The fantasy will tell you what other home objects can be decorated with the same reception.

For the key, you will need:

Thick cardboard (from any box or drawer).
Napkins or toilet paper - they should be dense (with abundant lubrication, they do not turn into "porridge").
PVA glue.
Acrylic paints and varnish.

As the basis (rear wall), the keysticker that we will decorate the bricks, it is better to take a rectangle from the fiberboard or plywood - hooks, loops will be attached to this basis.

Cut from cardboard rectangles-bricks are approximately the same size and stick them to the base, leaving the gaps between them.

So we put all the surface needed on the plan. In our example, the keyboard is glued to the center with the inscription, and on the top panel - the picture (work in the decoupage technique).

Leave to dry.

The dried composition is painted with red-brown paints. Great brick painting in combination with bronze, silver or gold paints (at first some of these paints are painting the seams between the bricks, then we paint bricks, leaving the shine between them).

When the paint is driving, it is possible to go through the same bronze or golden paint with a dry brush (brush with a macaus bronze, on the not necessary paper lubricate the paint with the brush until it becomes almost dry and only now they will visit her bricks) in some one direction.

Covered transparent acrylic varnish (it is better to use a matte varnish).

We attach metal accessories and the key is ready. Want to hang yourself, you want - give someone.

Today I will tell you, dear needleworks, as I did this key.

I'll tell you today, but here to make her, taking into account the drying of paints and varnishes, buying all sorts of little things like a self-tapping and ribbons - three days, no less, so if you are wishing to repeat my glorious feat - get ready immediately, the matter is unprecedented.
The keystone I wanted a long time, very useful in the household thing. And then all kinds of keys are lying wherever neither fall. Especially those that are not used every day. Here, for example, the key from the barn is irretrievably lost in the winter, I had to change the castle. I was still lost the key from the window, and I can't wash it from the inside, and there is a sorry to beat. I drove, of course, the window with curtains, but still insulting.
To buy the key to the toad - and the thing is the inadessive, and the napkins in the comedwork a whole collection of unused. And just we need - a piece of plywood and jigsaw, preferably electric. Both of these things were found from Manochka 4Repawka and she kindly granted me such a blank:

In addition to the preparation, we will need:
1. Some tree soil;
2. Acrylic paints;
3. If we want to make cracks - crackering agents;
4. Napkins (decoupage cards, printouts with a pattern - what someone like);
5. PVA glue (or special. Glue for decoupage);
6. Glue type "moment", "super gel glue" either a glue gun (that is, something very, very durable)
7. Different tassels;
8. For grids - polymer clay (you can take wooden blanks, ready-made woven grids, who can - can, for example, make a grid of newspaper tubes - very cheap Material; In general, options mass; I took a polymer clay because it was not fitting anything in the farm, but somehow did not think about newspaper tubes);
9. Ribbons, needles, strings, scissors.
10. Hooks, loop, screws, screwdriver.
11. Patience. Just a sea of \u200b\u200bpatience.

So, let's begin. We take our billery and the first thing they do - it is so ground. I used this means:

Specially buying such things do not need, they are expensive. You can use, for example, aquastop. Ground on both sides to extend the life of our future key.
Here is a blank after primer:

Further, the idea was like this: the key to be "under an old", so I chose a gentle drawing with lilies and decided to make cracker. Two-component me so far did not conquer and not to risk, I decided to use one-component.
For the lower layer took such an acrylic enamel:

Attention! Such enamel is better not to use. It has very low adhesion, lacquer and other paints are very bad. She remained after staining foam ceiling plinths (Ksati for these purposes it is ideal), you need to use somewhere.
Therefore, so: the bottom layer is painted with acrylic paint of the color that our cracks will be.
After complete drying (I have in accordance with the instructions for enamel it is 24 hours, artistic paints Much less) we bring the crustured varnish, I took this:

We are waiting for drying to the low (if you cut - cracks will not work)
Next we apply white acrylic paint. Here is the result:

Next, we take a napkin and cut the motive (I broke off).

The drawing on my napkin is very gentle shades, after removing the two lower layers of the napkin, it almost ceased to be visible. When I put a napkin to the key, it turned out that in places there are cracks (the cracks are large) the motive is absolutely not visible. Therefore, those parts where the flower should be, I presented with white paint. Accordingly, the layer turned out to be inhomogeneous, despite the sanding of the newly applied paint. There was two outputs: either to remove all the layers and start working again (make cracks smaller and refining), or try to turn the lack of dignity. I chose a second option. Two circumstances played here: 1) the overwhelming number of "jambs" of needlework works can somehow beat and pretend that it is so conceived; 2) The essence of nature is lazy and if it is possible to neglect to achieve the result without loss of quality - I must definitely "something" neglected. The output I found the following: Apply a thin-thin layer of white paint in the place where the napkin will be and without waiting for a complete drying, I stuck up the unwinding paint with a paper napkin (attached, pressing, and immediately removed). It turned out to be irregularities and roughness, which, according to my expectations, had to strengthen the effect of the paint-cramped paint.

Everything. It remains to wait for a complete drying - and you can glue the napkin. I really like the way of gluing the napkin with water: apply a napkin, slightly urine in the center, if something is uneven - we take the dry edges, slightly lifted and rely on the napkin again. And so slowly, slowly, very accurately, from the center to the edges. Next, while the napkin did not dry, I apply on top of her here is such a special glue for decoupage:

I love him for not necessarily to apply it to the billet or on the inside of the motive - you can simply apply over the napkins and everything is wonderfully stick. Next to the photo tassel, which I work when gluing motifs is very convenient for these purposes.
Here is the result:

Top to cover the necessary amount of layers of finishing varnish. I had enough two.
While lacquer dries, you can go with a lattice. I used the polymer clay "bebik", I bought half the pack, had enough to teelle in the bail.

Just rolled and cut sausages of the desired size and quantity, especially without worrying about the ideal form. The main thing for me was - the perfect length. A little had to face with the future "roof", it was very difficult to try on the workpiece, the "roof" of something and the matter tormented at the same time to come up or stretch into length. But perseverance won - coped.

Finished details I planned to paint the same bronze enamel, which was used for cracks (so it was white polymer clay), but fate ordered otherwise.

That is why my doping oven, capable of keeping the temperature not lower than 180 degrees, either a saucepan with plastic handles, accidentally forgotten in the oven, but the details after the baking turned out to be such an interesting color:

To be honest, I was very even delighted by this fact: and I liked the color, and the problem disappeared with the detail staining.
Further everything is simple. Apply, trying to take a glue gun and collect our puzzle. Voila:
Next, take a ribbon for the leaves:

The edges cut and very, very carefully fix with the help of a lighter (the flame to bring from afar, slowly and neatly), as a result, you can get very cute roundings on the tips:

Next, all this can be placed on glue. However, I decided that let it be better than the flowers will be removable, they can be easily erased.
Buds to the leafs sewed not in the middle, but like this:

Long edge is left for tied to the lattice.
Everything. The key is ready. Hooray!

Send the material to you on E-mail

interesting ideas For your home! "\u003e

Each apartment should have an order, and all things must lie in their places, it also concerns the keys. Each person has a bunch of home, garage or office. In order for the subject to be constantly at hand, at one time was invented a small, but very important accessory, this is a wall key. It is easier to make it easier to make it simple, you only need to show a little fantasy and follow the recommendations of our review.

The most original ideas for your home

In general, the keys house can be divided into two main categories: open (metal, wooden, leather) and closed models (used for careful or strict storage).Wall-mounted key kelks are light construction With a holder that simply complements the overall design of the apartment.

To make the key to the hallway with your own hands, we will need:

• Wooden blank in the form of a house.
• Napkin with an image.
• Glue composition for decoupage.
• Tassels.
• Matt lacquer.
• The ground mixture of light color.
• Scissors.
• Texture paste.
• File.

Decoupage of the wall keyword do it yourself, the first stage of the work:

Photo	Description
Prepare the surface	Initially soil wooden house Two layers, then plaster.
Cut the image	Cut the desired image with a pre-cooked napkin.
File Lizard Pattern Down	Be sure to separate the layer where the drawing is depicted and applied glue composition. Then a lie image on the file drawing down. The result is smeared on top of glue.
We place the image and applied varnish	After that, the stationery file raise and apply to our house. We place an image with a glued with glue and we pass on a fayer roller. After all the works, we gently remove the file and let me dry out the product. Borders painted light color And we wait until our key will dry out. After that, we apply several layers of matte varnish.

Discovering a house

At the second stage, we are decoking with your own key decoupage keyword. We will need a brickwork template and a structural pasta for further action.

First you need to glue the roof and with the help of a masticine to apply a layer of paste, which gives the structure.After driving, we apply the glytter and a silver shade of paint. Once again, let me dry, then the house is covered with varnish, dried and mounted fasteners for keys.

Decoupage pocket key

In addition to wall and desktop key, there are also pocket models. Such a thing is not just an image of the owner, but also performs several functions. About how to make a hand key with your own hands we describe a little more. Take the easiest but popular option. For this we need:

• Leather flap, 150 * 105 mm.
• Suitable leather color rivets.
• Billet for keys storage with carbines.
• Punch.
• Scissors.

Pocket keeper will be much more prettier if it rounds the edges. To make the markup correctly, you can use the usual cover from the bottle.

• First we apply the workpiece with the carbines.
• We put the key ligament and wrap the edges to determine the place for rivets and make a mark.
• Under the key under the keys we make a gasket to strengthen the whole model.
• For all applied labels using a bandier, we perform holes.
• Fix rivets the workpiece and secure riveting on weapons.

A special raisins will give a decorative firmware from a contrasting thread with a small indent from the edge.

Article