The door handle is used several times a day, which leads to the need to repair a device or a complete replacement. The first stage of work is the analysis of the handle and finding out the causes of the breakdown. How to disassemble the handle of the interior door on your own, read further.

The main types of handles for interroom doors

The interior door can be installed handles of the following types:

• stationary. The handle does not have any elements of the latch and serves solely to cover or open the door. Stationary handles can be installed with one or both sides of the door;

• pressure. Pressing on door handle The latch mechanism is drawn into the pen, which leads to the possibility of opening. If the handle is located in a horizontal direction, the door is closed and fixed in the selected position;

• swivel. The latch-retainer is activated by turning the handle. Rotary handles for maximum user convenience are priority made round forms. Round handles are also called knob knobs.

Purpose and rotary handles can additionally be equipped with key locks.

Disassembly of the handles

When the handle disassembly is required

Self-disassembly of the handle may require:

• when forming a screen or jamming-latch mechanism. In this situation, it is enough to smear all the work items. Machine oil or a special mixture of WD-40 is used for lubrication;
• in case of irrelevance of the device due to a long period of use or absence of a careful relationship and periodic care. All door handles require regular inspection and timely lubrication of moving elements, which increases the period of operation of the product;
• to carry out the current, for example, to replace the latch or tighten the fastening bolts that lock the device on the door canvase;
• to replace the handle to a newer or perfect model. New models are on sale, which can serve as an interior subject or have a greater degree of protection.

How to disassemble an intercommercial handle for repair or replacement? To do this, it is necessary to familiarize yourself with the following instructions that are developed by experts for the most popular types of pens.

Replacing stationary handles

To replace the stationary handle, you must unscrew the locking screws that may be located:

• on the front of the handle;
• under the decorative lining.

To remove the decorative lining it is enough to care enough to pick it up with a sharp tool from one side.

Disassembly of rotary handles

To disassemble a round handle, you must prepare:

• special key for weakening the retained pin. The key comes with a handle. If a special device is lost, you can use any hex key suitable for diameter;
• screwdriver.

Disassembly of the handle is made as follows:

1. on the decorative pad, you need to find a hole for the hexagon key. It is most often located below or on the side;
2. the key is inserted into the hole and slightly clicks. In this way, there is a weakening of the retaining pin;
3. with the other hand, the handle is removed. To do this, it is enough to pull the device for yourself;

1. at the next stage, a decorative pad closing the hole in the door canvase is removed;
2. under the lining there are fastening bolts that need to be loosened with a screwdriver. After performing this operation, the door handle disintegrates into two parts.

If you need to replace the rotary handle, it will be necessary to remove the latch. To do this, it is enough to unscrew the fastening screws located on the end part and fixing the corresponding mechanism.

Removing the latch mechanism

The process of self-disassembly of the swivel handle is presented on video.

Disassembling pressure handles

To disassemble the handle with a pressure mechanism, a screwdriver will be required, as suitable as possible for fastening bolts.

The disassembly process is performed according to the following scheme:

1. at the first stage, it is necessary to remove the decorative lining. The pad can be attached in two ways:
   • with the help of thread. To remove the item, you need to rotate the lining several times counterclockwise;
   • using the retainer tongue. To remove the lining, it will take a sharp tool to push the tongue a little in any direction;

If, due to pollution or breakage, the pad is not turned away, then you can resort to the help of a screwdriver and a hammer. The screwdriver is inserted between the overlay and the door. Hammer blows on the screwdriver handle allow you to move the mechanism from the place and unscrew it completely.

1. at the next step, you need to unscrew the bolt, located at the bottom of the handle. With this mounting element, the knob itself is fixed to the mechanism with the latch;
2. under the decorative lining there are two or three screws that fix the main mechanism;

1. after unscrewing all fixing elements, the handle is freely pulled out.

The shut-off mechanism of the pressure handle is removed as well as the handles with the rotary system.

Having become acquainted with the proposed schemes of disassembling door handles to repair the device or replacement, without the help of a specialist. To install the handle, you can be guided by an instruction attached to a new device or perform all the steps of action in the reverse order.

Door accessories are experiencing significant loads every day, so over time it fails, and then it is necessary to disassemble the door handle and replace it with a new one. Even the highest quality fittings has its own service life and with its expiration, it requires repair or replacement. Often door handles are installed during the installation of the door block. Representatives of the company that sold the doors, or these works make a brigade of repairmen. And when the handle breaks, it is necessary to disassemble it yourself, and in this case information about the methods of disassembling the door handle will be useful.

Before proceeding to the disassembly of a broken handle, it is necessary to determine its type, since it depends on how to disassemble it.

Door handles are now produced in various shapes and structures, but in general it is possible to submit their classification in the following form:

• Handles Nobies. They externally resemble a ball (but there may be another form), in the center of which is the key well. Such a knob opens with one of the sides, and on the other hand there is a locking button. Most often, such handles are installed on the inner doors.
• Purpose knobs. They are equipped with a latch embedded in the door, which, when you click on the handle goes inside the door dense. In the usual state, the latch tongue is advanced. These handles are usually equipped with cutting castles. When disassembling this design, it is important to remember about the location of the latch. The lining on these handles are separate (sold complete with the lock) or Paletny (solid). Can be installed on outdoor and internal doors.
• Stationary handles. They are attached directly on the door leaf with screws, not connected with the lock. Included with such a handle, a roller latch can go, which fixes the door in a closed state, and when the door is opened easily. Such handles can be in the form of a bracket, planks, P-shaped, round, curly, etc.

How to disassemble a stationary door handle

After finding out the type of handle (whether there is a snap-in mechanism or it is normal), proceed to its disassembly.

1. If the knob is fastened with self-drawers, then using a screwdriver, unscrew the main part, and after it is removed, the handle is examined for damage. As a rule, you can choose exactly the same handle and install it damaged. The main thing is that the lining on the door coincides with the previous option, because in the place of attachment of the previous handle there are already holes for the screws that will be difficult to hide if they are not coincided with the new overlay.
2. If the handle presumably has a common rod, then you must first make sure: on the one hand hold the door handle, and on the other hand, they turn against the clockwise - if the handle is unscrewed, then it is stripped. In this case, unscrew the element on one side, take out the structure on the other side and select the most similar version of the new handle. If you wish, you can replace such a handle with a latch if the place from the rod closes the new overlay.
3. Handles with mechanical latches are removed like this: Using a screwdriver, unscrew the screws, removing the decorative lining around the handle. Such handles, as a rule, consist of their tetrahedral rod and the latch tongue mechanism. After removing the fittings, you can see what the handle is kept: sometimes a hole in the tetrahed rod is made and in the same handle itself, and then they make a small crane with a hat through them. In this case, the crashes are removed and the handle is easily removed. From the opposite side, take the handle along with the four-rod rod, also by unscrewing the overlay.

How to disassemble a round door handle

In order to disassemble a round door handle (or nob handle), it is necessary to follow some rules. To perform this work, you will need flat (or cross depending on the fastener) screwdriver, as well as the key to the focus, which should go bundled with the handle.

• First, a flat screwdriver is pushed and removed a flat pad around the handle. Then a special key or any thin and sharp item is pressed on the opened stopper and pull the handle. Carefully remove it and from the side of the handle removed, unscrew a pair of screws. Two parts of the handle are removed from the door cloth and then unscrew the screws that hold the latch, they also hit the door.
• It happens that there is no need to change the door handle, you just need to deploy it and install in the reverse order. To do this, first insert the latch of the bevelled side of the tongue to the side closed door And screw this element with two screws. Then in the desired side of the door insert the part of the door handle, where the mechanism is located for the key. From the reverse side, the clamping part is inserted and fastened with two screws. It is necessary to check that the handle is easily rotated and returned to the initial position. If necessary, it can be aligned, slightly moving to the side.
• Then they put on a decorative bar, and the remaining item inserts into the clamping part of the handle. The square rod with a flat plate should be in a handle smoothly, so the retainer of the handle turns in such a way that the slot in it coincides with the same position of the square rod with the plate.
• At the final stage, they wear a handle, and when it comes to the stopper, it is interinted, pressing across the axis of the presser part. Then they move to the stop removable part of the handle, reaching the presser construction. The decorative bar is combined over the groove and put on completely. After that, check the fixation of the handle and its work - for this, on each side (and from the patch of the fixer, and on the side of the drum mechanism of the latch) rotate the handle until it stops.

Any owner will be useful to know how to disassemble the handle on the door, especially interior. This accessure is subject to a serious test of all residents, so someday it will fail, and it will be needed to replace another. In this case, you will not need to call specialists, you can cope on your own, saving at the same time on the wage of the employee. Especially since this case does not require great skills, but only a few skills. The dismantling process may differ depending on the type of handle, but the whole process should not cause special difficulties.

How to remove the handle with the interior door? Before proceeding to the analysis of the mechanism, you need to figure out what kind of classification it applies. The division occurs in several criteria. The described below is suitable precisely to parse the handle, because it has a classification according to constructive features.

Varieties of handles

Pressure. Such a handle is attached on both sides of the door web and has a M-shaped form. Opening occurs due to the load on the handle, after which the tongue is driven. The disadvantage of this accessory is that it is very effortful.

Swivel. The opening method is the same as the pressure, only the tongue is driven by not by pressing the handle, but its turn. Such models are often not very comfortable, because to scroll it, your hands need to be dry, otherwise they will slip. When replacing them, there is a reasonable question about how to unscrew the interior door handle.

Stationary. This handle has no latch. It is attached by self-drawing directly to the door of the door. It happens one or two-way, while the axial connecting element has.

Reasons for pars

Disassemble any of the models of door handles is not so difficult, because they have a similar design.

At the same time, the analysis of this accessure is required extremely rarely. What causes can cause it? How to remove the handle with the interior door?

The first reason is a breakdown. She meets most often. Often, Chinese models are susceptible to breakdowns that are not designed for permanent and coarse load. If the prevention of certain elements is not observed, the accessories come into disrepair. It should be repaired, and sometimes to replace the element entirely.

Next reason is the need to replace. Every year the market is updated with new and improved models. At the same time you can pick up color gamutsuitable for the interior, or put a new, more functional and reliable model.

Repair indoors often implies change style. Do not take care of the attention and door handles. Therefore, it often raises the question of how to disassemble the door handle.

Another reason is spoiled appearance. If the item is made of low-quality material, threads and scratches will be visible on it very soon, which negatively affects the entire interior.

Remove the pressure handle

How to remove the handle from the interior door of the push type? This mechanism is more complicated for disassembly, because in its design there is an axis rod, due to which the handle holds. It is delayed by a tetrahedron.

The process of parsing the handle must be started with removal of the plugs around it. They are attached to self-drawing or tightly pressed. They are very simply removed using a minus screwdriver.

On the one hand do the door you need to unscrew the accessories and extract. Then the second part is removed on which the axis rod remains.

If the handle is with that it is also extracted.

Compliance with the sequence and accuracy will remove the mechanism without problems without damaging the details and without creating unnecessary trouble.

How to remove the handle with the interior door swivel with a socket?

When in fittings swivel type No side of the hole in which you can insert a key or screwdriver, then the items are separated manually. Both parts of the handle should be scrolled in different directions and gradually remove from the thread. One of them will be axial rod.

Similarly, the socket is removed and cogs are unscrewed. When the axis is removed, you can do the following elements - latch or lock, if there is such a need. When decorative parts are removed, you need to follow the use of your strength, because overlooking it, you can damage the elements.

Remove the swivel handle

The knob with the lock for the interior door of the rotary type is removed as follows.

This will require a key to clamp the spring mechanism. Often it is not included in the packaging with the product, but it can easily replace a nail or other thin object.

First of all, you need to remove decorative plates that can be simply posed with a sharp object.

To push the sightlened pin with a key or nail, inserting the tool into the process hole located on the side. Together with this pull the handle and remove it along with the cap.

After you need to push the mounting screws located on the plate. Then two parts of the handle fall to the removal with the axis.

Collect back handles for doors round will not be difficult, only all actions must be done in the reverse order. First comes which is fixed with the plate, then the axis is inserted, the fasteners are put on it. Decorative inserts are mounted last. The main thing is not to forget that first the decorative flange is like, and then the main part of the handle is attached.

Remove the stationary handle

How to disassemble a stationary door handle? They are less common to break or deform. This is due to the lack of moving elements in it. Often the door handles of this type after removal are not repaired, but change the entire one. The removal process occurs as follows:

1. Screwdriver unscrews unscrew.
2. One part is unscrewed from the rod, and the second is removed with it.

This design may not have a central rod, this is much reduced process. It will only be necessary to select the desired screwdriver to unscrew the screws of a certain diameter.

Remove the handle with the latch

First of all, when the handle latch is dismantled for interior doors with an automatic retainer, you must remove the screws with a screwdriver. Next, discover the overhead items. Using unscrewed the rod.

After that, pull out the swivel mechanism, wrapped with a spring.

Popular way

There are several ways that the handle latch is removed for the interior door of the circular shape with the retainer. Here is the most popular of them.

You need to remove with a screwdriver, first from the part where the device is located. On the opening stop, it is necessary to press and at the same time pull the handle to yourself.

Then the retainer is pulled out, for which screws are unscrewed, after the latch is released.

Thus, to disassemble any door handle with your own hands does not make great difficulties.

The handle is a necessary door fittings element designed for convenient door opening. The practicality of the door design largely depends on the external aesthetic species, constructive features and the functionality of this accessory. With constant use of the door, the handle, regardless of the material and type, often comes to unsuitability: wear out, breaks. Therefore, with any problems, it must be repaired or change to another. In order not to call the wizard, this procedure can be done yourself.

Brief instructions About how to disassemble a door handle, read the reader with this simple process.

By the installation method distinguish 2 types of handles:

• overhead;
• curling.

Overhead fittings are installed on the door leaf using a plank, for a mortise design, it is necessary to have a hole in the door.

By destination there are:

1. input;
2. interroom.

By functionality, door products are divided into 2 types:

• movable;
• stationary.

Movable handles are released in 2 versions:

1. swivels (knot and buttons);
2. pressure.

The pavement of the door handle depends on its type and structural features.

Construction features

Stationary handles are produced without latch and locks. Elements of mounting to the door block are screws or screws. Such fixed structures are decorative, serve exclusively for the movement of the door. They can be 1-third or 2-sided different shapes connected by the axial element. They are installed on interroom or plastic balcony door blocks, rarely - on the input.

Pressure products are 2 rod levers, which are connected by a rod passing through the door block. In such a device, when you turn the faleva, it enters the inside of the door and locks it. With the help of elements are mounted outdoor and.

The main advantage of the model is its reliability. The failure rate of pressure mechanisms is much lower than others.

The rotary mechanism is most often performed in the form of a ball or a button with a diameter of 50-60 mm with a locked lock in the center of the round handle. The locking well may have a 2-sided output or 1-sided with a latch. The door opens with a simple turn. In such fittings there can also be a door opening block. Therefore, they are often used in the door structures of the bathrooms and interior blocks, and also called knobs.

They differ in compactness, simplicity of installation, low cost, but have such disadvantages, as a small strength and short-life due to the jamming of spare parts inside the mechanism.

Rotary and pressure products are distinguished by the form and method of opening the latch.

Composite elements of the mechanism

Rotary and push doors for interior doors have such spare parts and details:

• latch;
• planck or socket;
• decorative flange;
• fasteners;
• special key for pressing and removing the mechanism.

A set of door accessories with a keyhole comes with keys.

Required tools

In order to remove the handle of the interior door, you need to prepare such tools:

1. drill;
2. feather drill;
3. milling cutter;
4. flat screwdriver or screwdriver;
5. roulette;
6. marker;
7. chisel;
8. a hammer.

How to remove

Disassembly of the door fittings is not problems in the presence of required tools and minimum theoretical knowledge on the device of the mechanism. You can remove the door handle yourself without causing a wizard. To do this, you need to act according to the instructions:

• Cut and fix the door in a fixed state.
• Patty the decorative flange knife and pull it a bit. Under it are the fasteners that need to be unscrewed.
• On the decorative flange of the pressure device is a spring-loaded locking pin. Put it with a screwdriver. In the rotary models, the pin is located inside the housing. In order to get to it, insert the key or sewn through the technological flange hole. If the pin is not forgiven, rotate the flange until the moment of contact with it.
• Click on the pin, simultaneously delay door device.
• Unscrew the fastening screws.
• Separate the inner part of the door item from outer, remove the handle and decorative flange.
• If you need to remove the latch and replace it or repaired, unscrew the screws that lock it from the side of the door block, remove the bar, then the mechanism.

When installing accessories, it is not worth disassembled it on parts. It is attached to the door design in the reverse order. If the handle or latch is subject to repair or replacement, they produce further disassembly.

How to disassemble a door handle

The replacement of the door handle is carried out in order to carry out its repair due to breakdowns, wear, if there are failures, scratches, to improve external view, as well as with the complete replacement of the door block.

Before starting work, establish the type of mechanism, its features, because Some models with simple device disassemble easily, and some have more complex elements, such as latches with retainers. Performing such works is difficult. Therefore, it is necessary to consider the replacement of each type of door fittings separately.

Circular

To disassemble a round door handle or knob, it is necessary to follow such recommendations:

1. Picker with a decorative flange or lining with a simple swivel block without a key.
2. Shell, nail or special tap on the opened stopper.
3. At the same time, carefully pull the handle and remove it.
4. From the side of the removed part, unscrew the bolts from the fastener plate and disconnect it from the door canvase.
5. Out off the cylindrical mechanism, latch.
6. Remove the screws, disconnect the tongue.

If you do not need to change, it is rearranged. This happens as follows:

• Insert the latch so that the beveled part of the tongue look towards the door closure.
• Screw 2 screws.
• Part of accessories with a drum for a key Insert the door design on the other side.
• Attach the clamping part and secure 2 screws.
• The handle should be rotated without jamming and freely return to normal.
• Correct it. To do this, you must carefully hold one side and align the second.
• Attach the decorative lining.
• Insert the remaining part of the handle.

The accuracy of installation and operation is checked both by the position of the retainer itself and the drum device with the key.

Stationary

The stationary product has a simple design, attached to the door with screws. Therefore, it is rarely breaking, and it is removed only in the case when it is necessary to change it to a more functional model.

To unscrew the accessories for the interior door, it is necessary to carry out such actions:

1. Inspect the door mechanism for the presence of axial rod. To do this, hold one hand to the handle, the other - turn it.
2. If the mechanism is located on the rod, remove one supporting side, the second is detected independently.
3. If the rod is not detected in the handle, unscrew the screws holding the knob using a flat screwdriver.
4. Remove it, carefully pulling over.

When the mechanism is unscrewed, it is necessary to gently hold the hand to the hand, so that after removing the connecting screws, the part of the product did not fall out of the connector and was not damaged.

For interroom doors

In the pressure device, the process of his disassembly causes difficulties. This is due to the fact that accessories are attached on the axial rod and tightened with a 4-year-old.

To repair the handle of the interior door, the disassembly of the pressure mechanism is carried out in 3 stages:

1. Clean the screws that hold the lining, remove the plugs.
2. Then you need to weaken the fixation of the rod and separate the 4-face square.
3. Remove the lining on the other side, the remaining part of the mechanism and the axial rod. After removing the parts, you need to pull the handle on yourself.

Pressure is ready to replace or repair.

How to fix the handle

Often the repair handle is carried out in such cases:

• the mechanism is not returned to its original position;
• the handle is hijacked, heavily turns;
• does not move the tongue when turning, pressing the device;
• the handle falls out, while the base is not damaged.

Often the cause of these problems is wear, abrasion of parts for permanent operation. Therefore, it is periodically necessary to lubricate the mechanism spare parts and a keyhole, clean from dust and dirt. With lubricant, the door product scrolls so that the viscous fluid is evenly distributed over the items.

If the handle is obsessed, it is necessary to correct and pull the fasteners.

Sometimes it is required to repair fittings in a metal Chinese door. Chinese-made products from the silumin come into malfunction, break down, and mount the lock in such a door is not easy. It's easier to replace the mechanism. The principle of operation is similar to replacing the element in interroom doors.

In intercompensary

In the door handle for interior doors, the repair is most often produced when the handle is disappeared. The base remains attached.

The reason is the use of poor-quality accessories, as a result of which the retaining ring could break out or disappear.

For repair work, the following steps are performed:

1. Discontinue the base from the door.
2. Inspect the lock ring. If it moves, it is necessary to adjust its position and install. If the ring bursts or breakdown, it is changed with further mounting of the handle.

The duration of the procedure is 15-20 minutes.

Repair of the door handle of the interior door is carried out if the accessories do not return to the normal position after opening the doors.

The cause of the malfunction is a breakdown or spiral displacement.

To replace the spirals carry out such work:

• remove the device;
• discontinue the damaged part, replace it;
• top to fix the locking ring;
• machine mechanism.

If the spring burst, it can be made with your own hands from a small piece of steel wire. Preach it, warm on fire to bright red and lower in cold water.

Removal and repair of the castle

Repair of locks of interroom doors is difficult to perform. Causes of faults are different.

When operating cheap poor-quality door fittings from the silumin, a breakdown of a 4-graded pin is possible. Solving the problem - buying a steel mechanism from proven manufacturers and its full replacement.

A common lock fault - incorrect tongue operation. This is possible with a short pint. The square can move in the direction of the latch, press it, reducing the functioning.

Repair work Castles are carried out in this way:

1. A long pin is bought, the length is measured.
2. With the help of a grinder, it is shortened to the size of the size.
3. Then you need to disassemble the lock of the interroom door.
4. Square is changing, door fittings are installed.

When installing the handle, the base should cover all the holes that remain from the previous mechanism.

The lock with the handle can replace or repair even a novice master who knows how to use prickly tools.

Door handles have a variety of forms, but are divided into several main species:

• Stationary. Such handles are not connected to the lock, often equipped with a latch, and exist as an independent accessory door. They only serve for the convenience of using it. Such handles are attached to the surface of the door leaf with screws and have a diverse design. Their most popular form is the P-shaped, which has the form of a bracket fixed vertically.
• Pressure. Their internal device is more complicated. The presence of a latch knob in the mechanism requires its inserts into the canvas entrance door and performing the appropriate hole in the box. When you click on the handle, the latch tongue is moved to the spring and the door immediately opens. In the free position of the handle, the latch is extended, and the door sash can be slammed. Pressure handles provide a dense connection of the web and the door box, and as a result - high sound insulation of the room.
• Rotary, or knobs-naroes. Usually they have a spherical shape and a keyhole located in the center of the case. To open the front door, the handle must be rotated along its axis. The swivel handle itself can be opened with the key, on the other hand it is the locking button.

Disassembling stationary knob

After determining the type of stationary handle, the interior door can be processed to its dismantling.

When fixing a stationary handle with screws, you need to unscrew them with a screwdriver, then remove it and inspect to search for damage or replacement. To change the handles, you need to pay attention to the fact that the new door on the door can be identical previously installed. This is due to the fact that in places of attachment of the old handle on the interior door canvas there are holes that will be difficult to disguise if their location does not match the fastening drills of the new overlay.

If door handles have one common rod, you need to make sure before disassembling the door handle: On the one hand, you need to hold one handle, and on the other hand, the canvas should be rotated counterclockwise. If the attempt succeeds, it means that the handle is rod. With a positive result, it must be unscrewed on the one hand, on the other hand, take out the entire design and select the identical removed new handle.

Handle with a mechanical latch to remove easy. Using a screwdriver, you need to unscrew the fastening screws of the decorative lining, and then remove it. After that, you need to determine which attachment has a handle. Usually it is connected to a four-sided rod with a key that is done through their coinciding holes. Therefore, removing the key, you can easily remove one handle, and the second door to the opposite side along with the rod.

Disassembling round handle with socket

Before disassembling a round door handle with a socket, it is necessary to inspect it well. If in the side of the handle there are no fasteners under a screwdriver or key, you need to separate its elements manually. To do this, it is necessary to hold the handle from the door canvase, and its other part is to rotate, removing from the screw thread.

After that, you need to remove the outlet, unscrew the screws and remove the axis of the handle. If necessary, you can repair or pull the lock and the latch. The decorative parts of the handle must be removed without excessively zeal, so as not to damage the parts of its mechanism.

Disassembling round knob-nob

The knob knob disassembled with a flat or cross screwdriver and a special key with a focus, usually it turns on to the knob.

Initially, you need to pry with a flat screwdriver, and then remove the handle lining. After the stopper becomes visible, you need to press it a sharp and thin object and pull the handle on yourself. From the remote handle, you need to unscrew two screws. Then, after removing the parts of the handle from the front door, you need to unscrew the screws holding screws. It should also be removed from the door.

It happens that the round handle requires no replacement, but reinstalling in reverse order with a turn. To do such an operation, you need to insert a latch in the canvas, facing the bevelled side of its tongue in the direction of a closed door and fix it with two screws. After that, in the desired side of the door, you need to insert a part of the handle with the key for the key. On the other hand, install the clamping part and fix two screws. It is necessary to make sure in the easy turn of the handle and return to its original position.

After that, it is necessary to install a decorative bar, and in the clamping part round knob - The remaining item. The rod of the square section with the plate should be smoothly set in the handle, so its retainer must be rotated until the slot is coincided with the position of the rod.

At the end stage, the handle needs to wear, and when it will reach the stopper, it needs to be "drown" by pressing the presser part of the axis across. After that, the removable part of the round handle must be pulled until it stops to the clamping structure. The decorative bar must be combined into the groove and fully put on. After that, you need to check the work and fixation of the handle. To do this, from the side of the patch of the lock and the latch mechanism, you need to turn the handle until you stop.

Disassembling push handle

In the pressure handle mechanism, the entire design is fastened with axial rod and tightened with an additionally tetrahedral.

• Start the disassembly process should be removed around the knob of the plugs with a screwdriver.
• Then it is necessary to weaken the tetrahedron fixing mechanism mounting the rod.
• After that, you should unscrew and remove the accessories from the axis on the one hand.
• Then you need to take out another part of the handle together with the locking rod. If there is a lock in the fittings, its mechanism should also be removed from the door web.