Door handles relate to those elements of accessories, which, constantly in motion, take on fairly heavy loads. As a result, after a while they can break or clog it. These problems can avoid the corresponding products of even the most authoritative manufacturers, including those like Sirius.

Figure 1. The knobs are distinguished by durability and simplicity of installation.

Based on these circumstances, it should be prepared for the fact that sooner or later door handles Sirius will have to disassemble and fix it. It is not difficult to do this. However, in order not to poke blindly with a screwdriver or sewing in various parts of this important device, risking breaking the built-in mechanism or spoil decorative coating, it is better to simultaneously read a small instruction.

Before proceeding to the disassembly and possible repair of the failed door fittings and do everything correctly, it is recommended to deal with its main types. It is necessary to know how high-quality disassembly / assembly and maintenance depend on the features of one type or other type.

Classification of door handles

The modern market for construction and repair offers an impressive choice of a wide variety of species of this product depending on the design, design and used raw materials. Nevertheless, it can be "squeeze" in the framework of the three main types:

1. Stationary handles. Not connected to the lock (if it is in the door), attached to the doorway directly with screws. The lack of mechanical communication with the lock allows the specified elements of the accessories of a wide variety of forms. Often, a roller clamps are sold with them, which constrain the doors in the closed position. Optimal for equipment doors with aluminum frame or glass doors.
2. Purpose door handles. Present accessories with a special latch on the spring built into the end end. Its function is to ensure the fixation of the door in the closed state. When opening (pressed on the knob lever), the latch enters the inside of the case, allowing the door to open. Mounted both on external and interior doors.
3. Door knobs. They have either a spherical or any other form (for example, the shape of the lever). Make up a single system with simple design mortise castles. In their central part there is a locking well, while the key is inserted from one side, and on the other hand there is a special button or a retainer in the form of a lever (butt). Widely used for equipment interroom doors, but especially popular with doors for bathrooms and toilets.

Features of the installation of pens Sirius, their advantages and disadvantages

Handles-Nobies (Fig. 1) Currently gained great popularity from builders and repair professionals.

They won their status with the versatility of use, speed and simplicity of installation, durability and reliability in operation (designed for trouble-free operation of up to 200 thousand cycles).

Their design and materials from which they are made will provide good strength and protection against mechanical and chemical damage.

In addition, for the production of these handles, a wide range of metals and special coatings are used (from relatively cheap chromium to expensive PVD spraying), which are able to satisfy almost any individual customer request. Thanks to its aesthetic appeal, they fit very well in almost any interior.

However, these handles have their drawbacks, which are quite a bit. In fact, the only significant minus of the Nob-design is that when installing such a handle, you have to do a fairly large mounting hole in the door (up to 50 mm). Of course, if the customer has a desire to replace the fittings of the specified type on a castle of any other design, it will be quite difficult to do without replacing the entire door canvase.

Tools required for removing and disassembling door handle

In order for the entire removal, disassembly and maintenance The specified door element has passed quickly and efficiently, you should prepare a small number of most ordinary tools:

• cruciform or flat screwdriver (depending on the screw type used in the knob);
• a special key that has an emphasis for assembly and disassembly operations (sometimes it can be replaced by the usual selection);
• adjustable key;
• pliers.

How to remove the knob nob from the door canvase?

Suppose that such a handle is already mounted in the door. Thus, before disassembled parts, it will have to remove it from the door canvase.

It all starts with the fact that on the side on which the blocking button is located (lever), the decorative top lining is removed. Removal is carried out using a stop key (or sewn), which are powered by a swivel retainer, located inside the housing.

After that, the knob with the axis of the retainer is easily removed from the housing: it is enough to pull for it. Two screws are twisted with a screwdriver. The halves of the door handle unfolded in this way are removed.

In some cases (for example, when reinstalling the door to another place) door handle Disassemble on parts is not necessary. Limited only to the removal with the subsequent installation on the opposite direction.

In a similar case, the handle is installed in the reverse order. The housing of the embedded latch-tongue is inserted into the end of the door leaf, turning it onto the bevelled part in the closing side, and is screwed to the door with two screws from the end. Then change the location of both half to the oppositeWhat they had earlier.

By half, on which the locking well is located, the part is screwed from the reverse side with two screws on which the blocking lever is connected. It should be strictly observed that the axial tube of the square section and the flat metal plate inserted into it inserted through which the lever blocks the rotation of the handle around its axis, they got up as required in accordance with the position of this element of the accessories on the door.

After that, a handle with a decorative lining is put on the fixed design. To secure it to secure it on the put place, at the time of installation, the pad is slightly pressed on the stopper of the swivel retainer. He must drown, giving the opportunity to the body clearly in the right place. The pad with the handle lives to the position of the rigid installation, while it is necessary to trace the groove on the lining case accurately combined with a locking protrusion on the presser part of the mechanism.

How to disassemble the door handle: sequence of operations

If further disassembly is required, it continues to withdraw the cutting ring. After his removal, the washer installed under it is cleaned.

Then, removing with a screwdriver the upper washer, you can examine the technical condition of the twist spring. The possibility of further functioning of the handle directly depends on its state. The spring will have to be replaced if the mechanical breakdown or the product is detected demonstrates a noticeable weakening of twisting. It is not possible to remove this part of special work, just to pose it with any screwdriver.

When disassembling the locking device, it is recommended to pay attention to the mechanism that is located inside the door canvase. After all, most often it can be used to mount the handle. From the end of the door, the mechanism is covered quite simply, for what you should unscrew the screwdriver (screwdriver) screws by which it is attached to the door.

The locking mechanism extracted from the door canvase is thoroughly cleaned by contamination. It is also recommended to wipe and the remaining elements of the entire knob design.

The keyboard mechanism on the door canvase in the sequence, reverse sequence of its removal and disassembly is collected and installed.

Nuances of disassembly

It remains to remember some nuances that should not be forgotten by performing this work.

By unscrewing one part of the handle, it is necessary for another half of the door from the back of the door with hand. If this is not done, then after removing the connecting screws, the specified part can jump out of the connector, fall on the floor and damage.

The accuracy of the installation and reliability of the functioning of the rotary retainer must be checked from the retainer, and from the drum device to which the key is inserted.

To determine how correctly the handle is mounted, it is necessary to check its performance. To do this, both sides alternately turn both pens until it stops. They must stop in the same position.

Sometimes, in order not to deliver excess troubles, with an obvious deterioration in the functioning of the entire handle mechanism, it is better not to change defective spare parts, but to replace all the fittings.

It is not difficult to notice, nothing complicated in the process of disassembly of the Sirius door handle with their own hands. It is just desirable to throw off the rush and carefully follow the recommendations developed by experienced masters. In this case, the success and quality of work is guaranteed.

Door handle - the most necessary element for interior door. Open the sash - swing, sliding, folding, without this device is extremely inconvenient, so it is a more popular accessory than the same castle or latch.

Door handle: Classification

These fixtures may have quite a variety of forms, but are divided into two large groups.

• Stationary - do not have connections with the lock and are installed as an independent device. The handle serves only in order to hold it, open or close the sash. Molds, as a rule, using screws to almost any surface. The handle design can be the most diverse. The most popular form was and remains P-shaped, in the form of a bracket, which is fixed vertically. If there is still a need to limit access to the room, the roller latch from the inside of the room is mounted on the sash. The photo shows the stationary view of the fittings on the interior door.

• Purpose - the mechanism is somewhat more complicated. The presence of a faual latch requires cut into the door cloth and the formation of the corresponding groove in the box. At the time of pressing the spring, the latch retracts and the door opens. When the handle is free, the latch is in the extended state, and the sash can simply shut. This method provides a more dense fitting of the sash to the frame, which means there is a higher sound and thermal insulation of the room.

The mechanism provides for an emergency opening: A slot is located on the front side, which allows you to open a locked sash with a screwdriver or other flat item.

Pressures are divided into two categories.

• With a solid lining-Palet - mounted through the lock. Attention should be paid to the axial rod, on which accessories dresses - it should be equal to the thickness of the door canvase. The length of the element can be corrected. In case of breakdown, you need to change the entire mechanism. The photo shows a sample.
• With separate lining - is installed with or without lock. It matters only the size of the lining and the magnitude of the key opening.

• Nobies - Round shape knobs are a type of pressure, but can also be known called swivels. The action is similar, but to open the sash you need to turn the Nob. Typically, the mechanism is supplied with a locking button, pressing which allows you to rotate the ball on the other side of the interior door and open it. For emergency breaking, a slot is also provided with the front side of the device. In the photo - installed on the interior door handle-nob.

How to disassemble a stationary door handle

Since its structure is the simplest, then the breakdowns associated with stationary fittings arise rarely. As a rule, the need to disassemble the handle occurs when the owner wants to change outdated or inappropriate model design. In this case, the actions are very simple: screwdriver with a flat end is unscrewed and the knob is removed.

A variant is possible when the accessories on both sides of the door is installed on the overall axial rod. It is checked like this: the handle is held on the one hand, and with the opposite turns against a clockwise arrow. If the fragment is unscrewed, then the accessories are rod. You just need to gently unscrew the first fragment, and then take out the second door.

How to disassemble a handle

In this case, it will take a few more time, as it is known in advance that both fragments of accessories are connected by one rod.

1. Screwdriver remove screws holding the lining. Pallet is removed.
2. You should explore the four-mounted rod. In some models, the axial element and accessories are additionally supplied with a fixing rod with a hat. If it is so, then the holding element is removed, and the accessories easily unscrewed from the axis.
3. The second fragment is removed from the canvas with the axial rod. It should be previously removed the second lining.

How to disassemble round fittings

The sequence of actions is almost the same. To disassemble the mechanism, a flat screwdriver will be required and an emphasis key included in the lock kit. If the key is absent, any other object is suitable with a thin edge.

1. From the side where the Nob is without a key - simply swivel, the screwdriver comes with a screwdriver and the lining is removed.
2. Nob fixes the mechanism stopper. In order to disassemble the accessories, you should hold the lock with a key or other subject with a thin end, and remove the freed fragment.
3. With a screwdriver, both fragments of fittings with the front and end side of the canvase are removed.
4. Shipping screws that hold the faleva latch and the mechanism is removed.

On the video about how to disassemble the door handle is described in more detail.

The attentive and responsible owner will take care of the repair and replacement of extensive household items. Door handle - the functional element of the fittings, with which various problems occur due to frequent use: the mechanism can also click. Often, the places of fasteners weaken, as a result of which the handle is cleared, and it becomes uncomfortable to use it. To find out which element was worn and broke, it is necessary to access the product inside. Thus, to replace outdated parts or all the product on a new one, you need to dismantle fastening from the door leaf. To do this, consider in advance the question of how to disassemble the door handle. After reading the best way, you can reduce the costs of time and effort.

Depending on how this element of fittings includes, the technology of its removal and dismissal will have differences. How to remove the handle from the door, it is easy to learn using a phased parsing scheme. Main types of designs: stationary, pressure, swivel or knob. To remove the stationary handle from the door is the easiest way, since it is in no way connected with the lock mechanism. Accordingly, when removable, the pressure and swivel disassemble.

When you may disassembly

• Breaking. The harder the design of the product, the higher the probability of emergency breakdown. Also worth paying attention to the price: too cheap accessories for the door is unlikely to last long. In addition, if the door is often used, the fastening can be disretened faster. Therefore, when the product is selected, its intensity of use should be taken into account. Where the handle does not use so often, you can choose cheap options. If the knob will have to be repeatedly subjected to workload during the day (for example, for the door to the bathroom), it is necessary to choose a product with high strength indicators.
• Planned room repair. In the formation of a new design of the room, the old products "do not fit" into a new picture of the design.
• Fastened surfaces decorative elements . Typically, the first internal details come out, especially castle parts and locking tongues. But sometimes the inner part serves for a long time without breakdowns, and outer surface Acquires a lighted and cutting look. In this case, it is worth the replacement.

Stationary handle

Stationary door handles differ from similar products simplicity. They are not associated with the lock mechanism and are fixed with the help of self-tapping screws or screws. Remove and replace them are not difficult. It is necessary only to unscrew the fixing elements and release the product.

It happens another option. If the screws are not visible, you need to rotate one part of the product to the side, keeping another part in place. This is typical for stationary fastenings of round shape. They are usually fixed using the main axis.

Pressure handle

Pressure design has an internal mechanism connecting it with a shut-off fault tongue. As a rule, these are products "g"-like form. When naked on it, the tongue disappears in the doorway of the canvas, and the door opens freely. The deeper the tongue enters the hole of the doorway, the more you need to produce pressure. Accordingly, the construction is more convenient such a design at which deep pressing is not required. The mount is made immediately from two sides of the door. General procedure for removing the product of the pressure type:

• Remove the main part. On the bottom handle, there is usually a bolt or a screw that needs to be unscrewed.
• It is necessary to remove the decorative lining, which hides underly the screws of the main part of the structure. The cover in most cases is attached with thread.
• Unscrew the screws, pull the part on yourself, holding the mount on the other side of the door cloth.
• Removal Design on both sides, you can get a castle release.

Handle-Knob.

The design feature of the "Knob" is that the castle is embedded in its center. At the same time, it can externally resemble the usual swivel or pressure option. This type of product is most prone to frequent breakdowns, so the owner is relevant to how to disassemble a round door handle. The disassembly of this design can be more complex than other types of door fittings.

Before disassembled it, you should look at carefully and find where the pin is located. Usually it is located on the side of the room and helps to fix the handle on the door. To find it may have to be tinted, as it can hide under a decorative lining. A special key with a focus is immediately applied to the kit.

• Using a screwdriver or other subject, clamp the pin.
• Remove one handle and unscrew the screws.
• Remove the second handle.
• We unscrew the bolts and release the lock.

Disagree In the question, how to mount the Knob, will not work. You need to do all the same manipulations in the reverse order.

Round handle with socket

The way its removal is distinguished by the fact that it is usually necessary to disconnect the elements by manually. The part that is located closer to the door canvase should be held, and turn the upper part. Thus, the upper element will be removed from the thread.

The second step is removed the outlet, unscrew the screws and remove the axis. Dismantling should be done carefully to avoid damage to the decorative elements.

Disassembly and parsing of the door fittings will not be great difficulties, if carefully and thoughtfully familiarize themselves with the peculiarities of its internal device.

Door accessories - a mandatory element for rare exceptions, and in this case it is not about its complete absence, but about invisibility. There are the very following different types These accessories, however, the door knobs for interior doors can be called the most popular option.

Variety of fittings

The appearance of accessories can be the most diverse - from elegant products of Italy to deliberately rough, imitating antiquity. More important is the design diagram of the device.

This feature is distinguished by 3 main types of fittings.

• Overhead - or stationary. They do not include any locking mechanisms and serve only in order to open or close the sash. The shape of the accessory may be the most diverse: P-shaped, round, sculptural. You can disassemble such a handle using a conventional screwdriver.
• Pressure - includes a locking mechanism. When pressed on the pressure lever, as a rule, a M-shaped, the force is transmitted through a special rod and displays a latch tongue from the locking groove. Thus, open intercommunal sash.
• Knob - have a round, oval or other volumetric form, although in fact they are distinguished from other types of door accessories, the presence of a more complex lock, which allows you to locate the room from the inside. This option is very common in living rooms and hotels, but it is rare in apartments. The photo is an elegant version of the accessory.

Accessories are performed from the most different materials. Moreover, the value of the product itself, and the design of the fittings. So for the pressure option, metal is most often used, less often plastics - the latter is too soft and fragile and with an excessive intensive pressing quickly comes in disrepair. The outline model is performed from wood, and from metal, and from plastic.

For a round model, metal and glass, both silicate and organic, are most often used. As a rule, glass is painted in different colors, form patterns and even an image in the depths of the item. No less popular variant of the combination of metal with glass. Such a combination is especially effective in the sculptural execution of fittings.

Knob handle diagram for interior door is quite simple, which makes it easy to disassemble and fix the fittings in case of its breakdown. You can manage this on your own.

Scheme disassembly knob

Accessories, especially if we are not about the elegant product from Italy, but about quite ordinary imitation from China, breaks pretty easily. The fact is that such cases are not provided for some serious locking mechanism, so that this kind of products are made of sufficiently soft alloys.

The handle on the side of the indoor room inside the sash holds the lock pin. For softness, it is supplied with a spring. In fact, to disassemble and fix the lock is quite a thin sharp item to prescribe on the pin. But, as a rule, the last is unobesened, so there are somewhat different.

How to disassemble the knob of the interior door?

1. To begin with, remove all the decorative lining, which do not allow you to get to the mechanism. The linings are attached by the usual screws, which are unscrewed with a screwdriver.
2. Then a thin sharp tool, like a screwdriver or sewn, pressed on the lock pin and pull the handle. In the photo - the extraction of Knoba.
3. Then on the end part of the web where the latch is released, unscrew the bar. Usually there is enough crust screwdriver for this, however, there are models for which a special tool is required.
4. A screwdriver is attached to the bar and carefully pull the latch.

How to fix the product depends on damage.

As a rule, springs are tied or weakened, but other damage occurs.

How to fix the knob of the interior door with different damage to video.

Interior doors are sold without accessories, only the door and rack can be included in the package, from which the door frame is to be assembled. No in the canvas and made in the factory conditions of holes for installing locks and handles. This is due to the fact that the handles, being standardized, have different designs and dimensions. In addition, the choice of fittings depends entirely on the preferences of the buyer. Therefore, in front of a person who has settled repairs with the replacement of interroom doors, the problem of choice - to invite the wizard or set the handles yourself. It should be noted that, deciding to install doors with your own hands, with the installation of door handles you will definitely cope.

Types of handles for interior doors

Door handles for interior doors can be classified according to the installation method, a method of operation, form, material, the presence of a lock.

By the installation method, stationary (overhead) and mortise models are distinguished. The overheads are attached to the door leaf, and for mortise it is required to drill holes in it.

By way of work there are:

One of the most popular materials for the production of door handles - brass. In addition to beautiful aesthetic properties, brass is practical and durable.

The interior doors, as a rule, do not install complex castle systems. The exception serves the plumbing castle installed in the bathrooms and bathrooms.

Installing the handle on the interroom door

Consider the features of the installation of the most popular model for interior doors - knob-knob. Puts are usually installed on the hung door, but many experts recommend to install the cloth to install. True, it is not always possible to do it easily.

Council. If the web is not removed from the loops and the installation is made in the rude door position, move the chair or some item to it so that the door is fixed during your work.

Tool for installation

The tool will need the most common, which is in every home:

A markup scheme is applied to the door latch, but simply make markers for holes without it. From the lower edge of the canvas on both sides, 1.0 meters is measured. From each edge of the door you need to die 6 cm and the mark is made. With the help of the kitchen, there is a strictly horizontal line that connects these two points. At the end of the canvas, the mark with a pencil and seer is placed on this line in the center. Planking the latch and the sharp knife cut the veneer. We remember that the plank must be bundled in the canvas of the door so that it makes it a single surface with a web.

Some experts advise to begin drilling from the end part of the canvas with a feathery drill. With such a sequel, the chips when drilling the crown will fly into the already made hole, and not to score the crowns.

Feather drill should go to the depth of the blade, no longer needed. The drill is pressed against the point on the shell end and the hole is dried. Then, with the help of the crown, the holes are drilled alternately on each side of the canvas, it is not necessary to do it through them. As soon as the opposite side appeared the tip of the crown, the drill must be stopped and proceeding with drilling on the other side. So the veneer when the crown is not damaged.

After the holes are ready, with the help of the chisels and the hammer make a sample on the cutting line cut the line under the latch bar. Install the latch and twist two screws. Self-tapping screws are better not to be "regular", which are attached to the latch (they have an ordinary soft metal), and high-quality.

Using the key that is included, disassemble the handle into two parts so that it can be installed. To do this, one fastener screw must be loosen, another unscrewed. The central rod is inserted into the hole and on one side the fastener screw is tightly twisted. Then the second half of the knob-knob dresses on the rod, and the second screw is tightened. Self-sides are tightened from both sides, which will close decorative lining and the self-tapping screws will not be visible.

After installing the knob, it remains to install a "return" on the box. The door is covered, but not to the end, and the pencil mark the upper and lower edge of the tongue. With the help of the square, the distance from the edge of the canvas to the center of the latch bar is determined, and this size is transferred to the door frame. Then the "Furniture" bar is applied to the box, the knife cuts the knife, and the chisel is made cutting down the bar and the tongue. The door closes and checks the work of the latch.

Then the plank is installed on the box. Special "pockets" for sale for deepening under the tongue, plastic or metal are made. Self-tapping screws that fix the "Furniture" bar can be closed by self-adhesive plugs. After that, the installation is completed.

How to disassemble and assemble the door handle of the interior door?

The installed knob-knob can be disassembled in two ways, depending on its design. Unfortunately, such models most of them have enough quality and often fail.

The disassembly of one design begins with the fact that it is necessary to carefully fit and remove the decorative lining. The lining has a special groove, usually he looks down. Unscrew the screws will interfere with a spherical handle, so it is necessary to squeeze the lock pin and simultaneously with a little effort to remove the handle from the central rod. Once the ball of the handle is removed, unscrew the screws will be very easy.

To disassemble the second design, which does not have a locking pin, you need to click on the spring pin with the key of the supplies through the process hole and remove the ball of the handle. If the key lengths are missing (it happens), use a simple nail. Then the decorative lining and screws are unscrewed. If you can not find a springtime pin through the technological hole, it means that the knob's knob was collected incorrectly. Turn the decorative overlay 180 °, and the problem will be solved.

Collective handle in reverse order.