Convenient when the lock is sold immediately with handles on the bar. You do not need to buy anything and guess: or either the inter-axis, and whether the plank is suitable, and whether the shades are coincided. At Palladium, more than 50 mortise sets for entrance and interior doors. In this article - a brief dossier on them.

1. Castles with aluminum handles

Models: AL 1613 (in the photo), Al 1618, Al 1703, Al 1708, Al 1853, Al 1858.

These sets combine the handle material: aluminum lever, bar - made of steel. We advise you to install them on any doors other than leading to the street. Still aluminum - metal light, soft and antipractical. In conditions high humidity (precipitation, fog, proximity of water bodies) Decorplatation is cleaned more intense. In a year or two, the handle will go stains.

How do these mortise kits differ from each other? First of all, the design of the handle, the mid-scene distance (61.5 mm, 70 mm, 85 mm; see the second and third digit in the model name) and removing the keyword from the end plank (40, 45 mm). All values \u200b\u200bcomply with standards, which makes our products interchangeable with many other brands.

The buildings of all locks are made of galvanized steel, a brig and latch (universal - for the right and left doors) - from the Cam. Tests have shown that the nodes of the latch and the riglel are withstanding at least 150,000 cycles. If we assume that a family of three people use the castle, then this is at least 40-50 years without wear.

The package includes a 5-pin cylinder Eurostandard 30 x 30 mm. Its housing is cast from aluminum, and the core and pins are from brass. The latter guarantees corrosion protection, jewelry accuracy of pins, and hence smooth turn and higher secrecy of the mechanism. The cylinder has hardened inserts from drilling. And if you want to protect it from knocking, pulling out and lining inside the matches and pinch, just install the bron alphabet.

Equipment: Castle case, handles on the bar (aluminum / steel), cylinder mechanism (aluminum / brass), 5 keys, screws, scrolling screws.

Price: from 1466 rubles.

2. Ledged locks with handles from Cam

Models: 1702, 1703, 1706, 1707, 1852, 1853, 1856, 1857 (in the photo).

This line of mortise sets is slightly more expensive, but more reliable. Business in material door handles. Cam is durable, like small carbon steel, and when they grab the lever - you feel that the palm crimps the real strong metal. Of course, pull out or twist such a handle is unrealistic.

Another advantage of the Camov handles is practical. In this sense, they are close to brass: years retain the homogeneity of the coating, even if they are constantly raw or hot. For the entrance doors, including the metal, the option is better not. For internal too: it's nice to touch the tsam, he is warmer than aluminum.

The key installation parameters in the TsAM line are standard: the mid-scene distance is 70 mm, 85 mm, bexet - 40, 45 mm. Extended selection of pens. If there were only two models in the aluminum series and both curved, now there are four of them and for every taste: curved and straight, smooth and perforated.

The hull of the lock is seated from steel and galvanized to protect against corrosion. Universal latch and rigel nodes are designed for 200,000+ triggers and the door will survive under standard load. The mechanism is all the same - a 5-pin brass eurocyarder in an aluminum case 30 x 30 mm under the English key. The level of anti-vandality is basic (there is protection against drilling), but it can be pumped, whenking the bronography.

Equipment: Castle case, handles on the bar (CAM / Steel), cylinder mechanism (aluminum / brass), 5 keys, screws, tie screws.

Coloring: Gold, Chrome, Bronze.

Price: from 1703 rubles.

3. On the replacement of the castle sho-25 (Bzal, Baranovichi)

In the 90s, each entrance was the doors with the Sho-25 push-button lock (including the author of the text and its neighbor in the staircase). From the very beginning, there were two problems with the castle. First, any clown with a screwdriver could operate it in 10 seconds. Secondly, a huge hole under the button forever tied the owner to the products of Bzal.

Then everything became worse. If the "Baranovichi" of the Yeltsin era served 10-20 years, then released at 00e and 10e - from force for 3 years. All due to the transition from metal to plastics where only you can not, including the node of the latch. Think: the castle, which in Russia is crashed into steel doors, always had a harvested silhouette larva, and now also got a plastic latch!

Those who are tired of the Dough "Belorus", we offer a set of Palladium 460-25. This is an analogue of "Baranovichi" sho-25 on the installation sizes, and at the same time the pass to the world of locks with the eurocyardrome. And although the euro cylinder itself is not included in the package, you can buy it with us or in any construction store.

One nuance: After changing the lock, the door outside will close the key. But this is even plus, because the button has a property to bring. Frequent cause Replacing SHO-25: The man slammed the door, mechanically pressed the button, and then I understood - the keys remained inside.

About the resource of the latch and brigal: and the one, and the other will withstand at least 200,000 cycles of work. This is more than 50 years of service in a family house of three. Latch itself (like, by the way, and handles) universal.

Equipment: Castle case, handles on the bar (CAM / Steel), retast plank, screws, tie screws.

Need to purchase: cylinder mechanism.

4. In replacement of the castle of ZV4-3.01 ("Zenit-Auto", Dimitrovgrad)

ZV4-3.01 (he is Daaz, "Vazovsky Castle") - this is a lottery: can work out both 10 years and two months. The same applies to his countless clones.

That in DAAZ annoyed most, so it is a handle. In old castles (until 2013 release), they are not spring and savory very quickly. Another vulnerability is a cylinder. He is from the ultra-like silumin and often refuses if you lock the door, raising the handle at this time. Open the lock is more complicated than "Baranovichi", but slightly: enough 2-3 minutes.

As in the case of SHO-25 and ZAZ, the Vazov castle has its own installation holes, far from generally accepted standards. Thus, after breakdowns of the castle there was a choice: or again SL4-3.01, or a new door.

Get rid of daaz-dependent without buying a new door can be. In our line, there are two cylinder locks with faleva handles - SV 4301/03 and Svz 4301/08. They are under the same installation holes as ZV4-3.01: they took out the old castle, installed our place in his place. Another obvious advantage is modern, and not the Sovdeopovsky design.

ZAZ "Motor Sich" and VAZ / DAAZ are the textbook examples of the fact that the "cult" does not mean "reliable." Many who bind to these domestic retro locks came across the problem of breakdown and the search for replacement.

Replace these locks standard will fail due to exotic dimensions and installation sizes .. Fortunately, there are our Palladium 04-6 and Palladium 4301 models, ideally getting at the place of ZAZ and VAZ / DAAZ, respectively. For a while they were sold only in assembling with handles on the bar. Now we re-release the lock data enclosures separately.

Armoric distance - 72 mm, Buxet - 55 mm

Palladium 04-6 can be ordered in our online store. The standard package includes a lock case, a retast plank and fasteners. And the cylinder mechanism is sold separately, but you can use old - from the original ZAZ. They are suitable.

1.1. On the original lock ZAZ 4-6 "Motor Sich"

Along with SCO-25 and WAAZ / DAAZ Zaporizhia Castle ZAZ - one of the door-cutting relics of post-technical Russia. In the 90s there was no staircase, where at least one of this trio did not jut. Moreover, ZAZ was even on steel doors, although the instructions were only stated on compatibility with wooden.

Nowadays, the chlipsky and technically lagged ZAZ 4-6 is a bait for the thief and the feeders of the services for the replacement of locks. Increasingly, it is found in Tambura, subsidies and in wickets, but there is no one in the doors in the apartment, it will not flashed.

Repeat: one of the global problems of ZAZ "Motor Sich" - non-standard landing distance. Most of the mortise locks are sharpened under the 85 mm inter-axis distance and a beta of 50 mm, and here they are 72 mm and 55 mm, respectively. That is, the manufacturer made you to life on the principle "somehow once put ZAZ - now I put every time."

Today, if you want to replace the broken mortise lock ZAZ 4-6, but are not ready to overhauled the door, you are not obliged to return to the miracle of the Zaporizhia engineering thought. You can buy a more reliable analogue with the same landing dimensions. For example, we have.

1.2. Than our door lock Better ZAZ "Motor Sich" and his clones

And in the Zaporozhye castle, many details from the fragile and slightly crumbling silumin. Latch, sleeve with a square under the handle - and those of it. That is why the original ZAZ is inclined to eat, and it happens, it breaks in 1 year. And that's why it happens much less often.

The mid-scene distance - 55 mm, Buxet - 55 mm

There is such an elderly cylinder castle - SV 4-3.01. He is known as Vaz, Zenit, Daaz, sometimes called "Ulyanovsky Castle" (on the deployment of the DAAZ plant - in Dimitrovgrad, Ulyanovsk region). Strictly speaking, all of these different brands, sometimes even different modifications with the addition of some secondary functions. But according to the dimensions and landing distances of the Castle Corps VAZ, DAAZ and Zenit are identical and interchangeable.

Our model 4301 - 100% Analog Family door locks SV 4-3 on the installation sizes. That is, the replacement itself is a pickle case: the hull of the Vazovsky Castle was taken out of the door, we inserted our place. Handles and larva can be rearranged from the old model. If that, decent larvae is sold from us. - True, so far only to the model 4-3.01 (on the trapezoidal bar).

You can in our online store. The kit includes: body of a mortise lock, a retast plank, fasteners.

2.1. About the original Castle VAZ (DAAZ)

The model confidently repeats the fate of Zaporizhzhya ZAZ: the same scenery (Russia and the CIS countries), the same peak time (90s and beginning 00). As in the case of ZAZ, the buyers of SV 4-3 preferred not to notice the word "wooden" in the instructions and put the castle on everything entrance doors basically.

In this and drama. For their own direct tasks - keep the door to the conditional storage room closed - the castle is not bad. Especially in the modification of DAAZ: on the definition of the mechanism, it bypassed the Zenit variation on the subject of SL 4-3.01. But the security properties in all these vases, dazas zero. The body is weak, in addition at all is not protected at all, and from the inside almost to the edges is coating with oil, which is eloquently talking about the quality of the device. Many key nodes, including latch and sleeve with a square under the handle, from the silumin, so quickly break. At the set of larvae of scanty secrecy (total II class), the quality of casting and admission is inappropriate. Opening of the castle without power tool at the thief middle Hand takes 1-5 minutes.