Menu

Garden tracks from plastic with their own hands. Decorative fence for cottages and traffic track

To help hostess

Plastic bottles were widespread. Many throw them out after use, and quite in vain. Of these, you can do whatever. Track out plastic bottles Do with your own hands will require minimum costs from your side. But it is necessary to prepare to be prepared in advance. The main stage is the collection of the required material.

Before using plastic bottlesThey need to be carefully laundering from the contents of the content, remove all the labels and dry the material in the sun.

Before using plastic bottles, they need to carefully launder from the residues of the content, remove all the labels and dry the material in the sun.

Prepare sand or ordinary earth, crushed stone, shovel, bucket, garden scissors, alignment boards, formwork. Subsequent actions depend on the method that you have chosen to create a garden track.

Fill the bottles of sand or earth so that with further operation they do not adequate under your feet. Then you need to carefully catch the sand in the container. Drop the trench for about a month and a half spades. Install the formwork - To do this, secure the boards on both sides of the path. In the prepared space, impose a household garbage - dry leaves, broken brick, sticks, etc. Flip the sand pillow from above so that in the future the path did not go into the ground.


Fill the bottles of sand or earth so that with further operation they do not adequate under your feet.

When everything is ready, put the bottles horizontally and cover them with boards so that they evenly plunge into the ground. Empty places formed between packaging, pour sand and cement and use the boards again. With the help of a sprayer, Pollow the mixture and let it dry, so that cement hardened. Your track is ready. If desired, the bottle can be painted in a variety of colors. With their help, you can divide the garden plot into several functional zones and give appearance Garden certain nobility.

Play a very important role and are his decoration. Interestingly and unusually looks track of five-liter bottles. Fold them, dry and cut down the bottom. Insert the eggplants one to the other, the resulting empties between them flood with sand. Make several rows into the trench - a specific number depends on the width of the path. Between the rows, put the construction mixture and, using the sprayer, fill with water.


Interestingly and unusually looks track of five-liter bottles.

Roads from covers

Another option of using bottles - lid. First prepare workplace: Note the future path, if you wish, put the formwork and see the earth, pre-laying the construction trash there. Lay out all the traffic jams, cover top with boards and sink so that all covers are on the same level. Empty gaps can be covered with sand and go through the board again, and then the brush to remove everything unnecessary. The track from the plugs from plastic bottles will look more interesting if you lay it out in the form of a beautiful pattern.

The alternative is the path from the inverted covers. It is created by the scheme described above. The only difference is not to be covered with a construction mixture. Such tracks from the plugs are not intended for permanent walking, only in decorative and therapeutic purposes.

Track from Dyshek

Fold the bottle and cut the bottoms, sort them in size and color. If desired, the material can be painted in different colors. Prepare a trench, put into her finished donyshki and sink. For an additional decor you can use glass bottles. They can be put on the site of formwork with ramps up and drive up to the ground level. It is interesting to look different. The result is a beautiful garden track.

Bottles from yogurt bottles

If a huge amount of container remained in the country, left after yogurt, you can make a beautiful garden path. To do this, fill the bottles of foil and paper of various colors. You can fold the pieces of chopped foil into the tubes, which, after filling, turn out inside. As a result, the foil or paper will be scented along the bottle wall, and the remaining space can be filled with sand.

The process of creating a track is similar to laying conventional plastic bottles from under the water. As a result, it turns out a spectacular decoration of the country area, which will delight you and your guests for many years.

Benefits and flaws of bottles

If you decide to make the tracks from plastic bottles on your site, it will be useful for you to know their advantages:

  • brightness;
  • ease of installation;
  • strength and durability;
  • minimum costs;
  • stylish cottage decoration.

Among the minuses can be noted the following factors:

  1. Need to raise a large number of Tara or covers.
  2. Finished paths are pretty slippery.
  3. Deformation at high temperatures.
  4. Flexibility - with time, the packaging is erased and fades under the sunny rays.

Before work, make approximate sketches on the sheet of paper. The house, fence and the rest of the decor should be harmonized among themselves. Decide whether the tracks will be monochrome or not, with a picture or without. If you plan to lay out the pattern, depict it on paper, calculating the required amount of traffic jams for each row.

The width of the track depends on its purpose. For walking, it should be at least fifty centimeters, for other business needs - eighty. If you want to get a durable coating, the plugs are better laying onto a concrete solution. When mixing the solution, you can add dyes into it. Then bright colors will be blocked between the covers. Instead of sand in the bottle, you can apply foil, wrapping paper, candy polls, etc.

Any layout method is easy to execute, but the practicality and beauty of the track depends on the correctness of your actions. Knowledge and adherence to all nuances will help to avoid trouble and achieve positive results. Therefore, if you have the opportunity, consult with a practitioner.

Where else can your fantasy be turned around, as not in the country. Here the abilities of the household are manifested in all its glory. In addition, often for this you do not need large investments. How many around the material that is practically thrown into the street. In the first positions, empty bottles and corks from them are firmly. Dacha decorations are obtained not only beautiful, but also quite cheap.

And how much joy they can deliver to children and adults. Plastic bottle is on all 100%. The covers will turn out beautiful panels on the wall of the house. You can perform original tracks from the plugs from plastic bottles in the garden or lay out a beautiful platform near the house. You can organize a sports corner for a child, where it will not only play, but also get a charge of cheerfulness. The covers can be used to arrange a path with obstacles. Lay them better than a smooth side down, leaving the ribs from above. In this option, a good massage for children's legs is obtained. The tracks from the plugs from plastic bottles are obtained very beautiful, if you make a pattern, selecting the harmonious combinations of colors.

True, there is one condition. The prepared material must be much, and one with this problem is difficult to cope. You need to connect friends and acquaintances to collect the desired amount. For a collection of material may take several years. But how nice will warm the soul made by their own hands the photo made in a warm course will allow you to remember a pleasant strand even in winter. Collect traffic jams for a long time, because their size is small, so you can come up with another option. For example, make tracks from plastic bottles. There are several technologies that can be used. If you want to use the bottle of the whole, then it is better to make a border of them, thus determining the form of a path. For this purpose on the sides of the track, dig a shallow narrow groove. In her, the neck down tightly stacked the bottles across the entire route. Then I return the land to the place and everything around will be tamped. If you have a good land in the country, you can stay at this stage.

If clay prevails, it is better to make the inner part of the track from the plugs from plastic bottles. Or combine all parts of bottles. Very nice on the site, the tropics created from plastic bottoms. To do this, cut off the lower part of the 1/5 bottle from its height. Top leave for blanks that can be used to create plastic palm tree. In order for the tracks from the plugs or from the bottoms from the bottle well the form, it is desirable to prepare the basis. If you comply with all the recommendations, you first need to pour rubble, thoroughly pull the sand of a large fraction from above. Having created a tight pillow, you can upload the path of the track from the plugs from plastic bottles. This, of course, is a very laborious process, but what kind of beautiful is the site. If you want to make a stronger coating, then the plugs are better to lay on the prepared base of concrete. But it is necessary to do it quickly until the cement grabbed. Use metal corks. They also fit well and can serve as decoration.

Tracks from plastic bottles and plugs from them

If you wish, the track can be made with your own hands, and it will suit this unusual material for this, like plugs from plastic bottles. Include your imagination and using tips, create a unique and practical art object at your country. And it is necessary for this very little: hard work, free time And our advice.

When it comes to a throwing material, many believe that it is much easier to work with it. This is not quite so. If you want a garden track not only a practical element landscape design, but also his business card, you need to follow some rules. They primarily relate to the choice of material and its preparation.

We choose the material

They say plastic decomposes not earlier than in 100 years. It's great! Indeed, in this case, it is perfect for garden tracks (for garden). The palette of plastic covers is quite extensive. The material does not lose its bright color for a long time, and besides durable.

In the photo - Tracks from plugs from plastic bottles:

To create beauty to move can go:

The main requirement for plastic covers is a high density. After all, there are a serious load on the tracks. And it will be a sorry of the spent forces if the coating serves a long time.

For the track you will need a lot of such material. You can independently make a calculation:

  • measure the tube diameter, 1-2 lithuan bottles It is 3 cm;
  • 1 meter placed 33.5 traffic jams;
  • 1m 2 will require 1122.5 corks;
  • multiply this digit to the area of \u200b\u200byour track, and you will get the total number of lids.

Here you can familiarize yourself with approximate prices for pumps for waterfalls and fountains.

Such a number of beverages One family will not master, even if you collect all the lids from bottles and cans, including water, beer, yogurts and even medicines. Connect to the project of all we can:

  • announce your decision to create an extraordinary element garden design friends, acquaintances and neighbors;
  • give the cliche about the collection of covers in social networks;
  • try to negotiate the supply of material with employees of the nearest cafe.

But before starting the construction of traffic jams, you need to soak and clean. Some inscriptions on them during this procedure are laundered. Others have to remove the solvent.

How to do

Corks can be laid differently:

  • face up (as a result, a smooth surface is obtained);
  • ribs up (such a track can be used instead of a massager);
  • inside up (the coating is in fact).

In the photo - tracks from plugs from plastic bottles with their own hands:

The last option is suitable only for small sites under the canopy. Otherwise, during precipitation, water and dirt will accumulate in the removal of the plugs. And for such an uneven surface is hard to care for.

Mosaic laying scheme

This is the most creative part of the work. Before starting directly paving, you need to decide exactly how your track should look like. You can lay out the covers with smooth rows, despite the color. As a result, you will get a multi-colored stove of color glare in your garden. This path attracts the look and looks spectacular.

But if you want something more extraordinary, pick up the pattern for your track yourself. This will help you with a cross-stitch schemes. Walkway women look good with color geometric patterns. If you are confident in your abilities, you can choose the drawings more difficult. Some daches create real story panels under their feet in their garden. It is in the country that such decorations are popular.

Experiment with color. Acquire children to this work. During a fun game you can come up with your drawing for track.

Tools and materials

Despite the low cost of the material, the approach to creating tracks from traffic jams should be serious. Sometimes they advise just to lay the cork mosaic to simply dissolve the soil and begin to create, sticking caps directly into the ground or layer of sand.

Such a carpet will not live for a long time. Not only does the caps do not hold out the lids and begin to fly away one after another, so also the grass will hurry to germinate between them. It is better to spend more time, but to do everything is kindly.

  • covers of different colors;
  • cement;
  • sand;
  • glue construction or ceramic tile;
  • wooden bars and planks for formwork.

Any track must have a base. Whether it is a path, powered by a paving, wood or plastic covers. First prepare the platform. For the construction of the track you need:

  • decide with the track area and make markup;
  • remove the turf and the top layer of the soil;
  • drop the trench in a depth of 10 cm;
  • drink supports along the edge of the excavation;
  • make a wooden formwork, and nails need to score on the inside of the design;
  • will set the struts for reliability (the optimal distance between them is 1 m);
  • fall asleep layer of rubble, gravel, broken brick;
  • prepare a solution from cement and sand (4: 1) and add one part of the glue to it, the mass must be medium consistency;
  • pour a small amount of solution to the prepared platform;
  • quickly lay the covers, according to the selected scheme, slightly press them into cement;
  • the solution should almost completely cover the covers;
  • after the cement is hardening, go through the rigid brush along the top layer in order to remove the extra cement.

The solution quickly solidifies, especially in hot weather, and laying mosaic requires a lot of time. Do not pour the entire track completely. Work in sectors. Spice your drawing on parts or conditional squares and pour small areas.

on: tracks in the garden do it yourself

Dignity

  • The coating performs an aesthetic function not in and damage to practical.
  • Material does not require material investments.
  • Plastic makes good temperatures.
  • Such tracks do not lose their aesthetic appearance for quite a long time.
  • The paths from the unusual mosaic are easy to repair: any lid can always be replaced.
  • The covers do not need to paint. They contain a resistant dye, which will easily survive the winter.

Disadvantages and methods to combat them

But such paths are not perfect, there are serious shortcomings. But knowing in advance what difficulties can arise with them, you can easily avoid them.

  • Plastic paths from covers become very slippery after the rain. Such coatings should not be arranged on the central tracks. Their place in the garden and near the recreation areas.
  • The icing track becomes dangerous. If you need to walk in it in winter, it is better to combine a mosaic of plastic covers with drawings from cement, ceramics or wood.

Here you can see styling sandy paving slabs.

Other options

The coatings of the combinations of plastic covers with bat look well ceramic tiles. Small sizes of elements allow you to lay out bizarre and extraordinary patterns. The result is a distinctive track from bright elements. Such a garden patchwork will decorate the garden and put the emphasis on the site.

The drawings can be diversified with metal covers. And the adherents of the ecodesign will like the tracks from wine traffic jams. Cork tree is a noble material with unique properties.

Health track from different covers

Homemade massage tracks in the garden have become quite popular. They love children and adults. After all, walking bass legs on the textured surface not only nice, but also useful. For such paths, the cement base is needed to which different material is placed.

Caps from juices, glass cans, corks, buttons, sticks. All this good sort by colors and sizes. Then you develop a sketch. Here you can play not only with color and texture, but also by laying. The cover laid on the end will create a convex surface, and the downstream down - will give a smoother plane.

From bottles

Ordinary bottles can serve as a wonderful material not only for making crafts for giving plastic bottles, but also for the device exclusive tracks in the garden. To do this, use whole bottles or their parts.

How to make plastic bottles

Plastic Bottles Track - good way Recycling containers. But empty bottles do not withstand serious loads. Therefore, before building a track, they need to be filled with sand, fine gravel or dry soil. If you want to diversify the color of the bottles, put inside the colored paper, foil or pour a little dye, and only then fall asleep sand. When the material is ready, proceed to its laying.

Without a cement pillow, do not do in this case. Only a pit for her need to dig deeper - by 1.5 bayonet shovels.

  • Gravel poured on the bottom, build formwork.
  • Bottles are placed sideways in the trench and poured with cement mortar.
  • Compacted masonry. To do this, the board is put on the track and pass through it.
  • After drying, the formwork is removed.
  • Decorating the edges. For this, any mosaic will suit.

Can be done interesting tracks From the lower parts of the bottle. For this prepare the trench of a depth of about 15 cm.

  • Cut off the bottle of the bottom (leave 1/5 height).
  • Make a formwork and concrete pillow.
  • In the wet solution to lay a bottom.

From the remains of bottles you can build interesting garden sculptures Or guards for seedlings.

How to make glass bottles

The technology is largely similar to the previous one. Only glass bottles do not necessarily fill with sand, although the sand will give them extra strength. It is better to take bottles from under champagne or wine, but beer.

Install them mostly neck down. For such a track, you need a rather deep trench. Therefore, bottles for tracks are often cut and used only the bottom. Stacking technology is the same as in plastic.

Very cool looks like a backlit path. To do this, you need to build small light bulbs under the bottle. It is better to take LEDs - they are durable and economical. Bottles are also suitable for the construction of walls, fences and borders. According to the link you will find information, how to make crafts from bottles for the playground.

Conventional lids are cheap and practical material. They are well suited for the paving path of varying degrees of tolerance. The surface decorated in this way looks cozy and colorfully. And in order for them not to be knocked out from the overall style of the site, add the garden with bright mosaic sculptures and panels in the same color scheme.

More information

Garden track made of covers for children with their own hands. Master class with photo

Efimova Alla Ivanovna, educator GDDOU№43 G. Kolpino Saint-Petersburg
Description: Work can be performed with children from 8 years, with the help and guidance of an adult. The material can be useful to all who is fond of creativity, loves gardening.
Purpose: Work will serve as excellent design. garden plot, creates a wonderful mood.
Purpose: Creating a beautiful and unusual track.
Tasks:
- to create children to create tracks with a cement mortar;
- to know with the process of the cement mortar;
- develop imagination and fantasy;
- Love love and interest in nature, creativity in all its manifestations.

Hello, dear guests! Today I want to talk about how you can create a beautiful and unique track from the remedies. For a long time, we have gotten out the plan for building a track, as it was necessary to accumulate the material, from which they decided to cook. Copy all winter. We are all a lot of water drinking water, lemonade, juices, and the caps from the bottles of a speech or throw out. But in our case, we copied.
Copy covers and decided to lay out the path to our small pond at the cottage. This is our first job in such a technique, but I think not the last one. There was a lot of ideas and really want to bring them to life.
Materials and tools:
- Supreme, eurocement, water;
- bucket for the kneechen solution;
- Master OK;
-2 bucket from under mayonnaise (container for measuring cement, sand and water);
-Relator and mixer for concrete;
-breaks from bottles;
-shovel.


Cement mortar: For 1 bucket (from under mayonnaise) eurocent, we will need 4 sand buckets, 1, 25 bucket of water .. The sand should be sifted, or just in the manual, namely, I did, remove large stones, seek sand through your fingers. When all the ingredients are covered with the container, it must be mixed with a perforator with a concrete with a mixer for concrete, literally 7-10 minutes, to a homogeneous mass. My solution interrupted in a concrete-mixture, as the husband poured the foundation for the fence, and my son and my son decided to lay out the path.
Master class:
We have already been on the plot, and the path to it was, but the usual one of the rubble. First of all, we need to be determined with the place where we will have our path, draw or beat (as I did) the path of the path, removed the crushed stone and started work.


To begin with, we will define our lids in colors.


The path was drawn, you can proceed. We decided to put the edges of our path with red covers. We need to first post a little cement and quickly until the cement froze, we begin to lay out the path.



Then we decided next to the red near the three rows of green - this is our grass.


Son offered to lay out a couple of trees, the trunks laid out brown traffic jams
(I also first a little cement and lay the covers).


Then the idea was born to lay out a house, as the summer in the yard, thought up and put the sun to write down the path. The carcass of the house decided to lay out of red caps, windows and a yellow yellow roof. The sky laid out blue covers.



Then begin to fill out an empty place between the rays of the sun, we decided to lay on the one hand on the white covers, the other side is blue. You can leave, of course, and so, but we wanted to continue.


We proceed to fill the space between the trees. Tried to lay out the flowers and that's what happened.




Fill out all the remaining space, as the soul wishes.


Our path is ready, I think it turned out not bad. Thank you all for your attention.




You can lay out any drawing, which is enough material and fantasy. We wish to continue our work, summer mood, beautiful summer ideas, and most importantly embody these ideas into life.
We wish you all summer, warmth and comfort.
I draw summer
P. Pranuza
I draw summer -
What color?
Red paint -
The sun,
On roses lawns
And green - field,
In the meadows of the pouch.
Blue paint - sky
And the stream of singers.
And what paint
I will leave cloud?
I draw summer -
It's very difficult ...

Time to guid beauty on cottage plot There is always a little - all the forces take the garden with a garden. But recently, many people do not regret the time and effort to make their plot beautiful and unique. Take, for example, plastic bottles. With each trip to the country's dacha, drinks are brought with such bottles, and for all summer this container is accumulated a lot. Of course, you can collect them in bags, take away away and just burn. But it is harmful to ambient. We offer another option and now we will tell how the track is made from the plugs of plastic bottles. By the way, and the bottles themselves can not be thrown away, but make a lot of useful things of them.

Benefits

- low cost. Plastic bottles are much everywhere, you can ask the plugs from them from neighbors and acquaintances or just remove from those bottles that lie inconsolated in the bushes;

- Pretty simple in the manufacture;

- It looks elegant, beautiful and fun;

- Long service life.

1. First of all, select the type of future track. Think some ornament will be uploaded. Then prepare a place for the path. If necessary, you dug under the trash trench for one and a half bayonet shovel.

2. It is best to use cement mortar In proportions one part of the cement and four parts of the sand. Some people before placing a mosaic from the traffic jams to grow ground, slightly moisturized with water and begin to lay out the cork carpet. But long he will not last, after some time the plugs one by one will begin to fall out. Therefore, use cement mortar.

3. From fine rubble, do the base and confuse it. Then put about five centimeters of the solution, put it on it metal grid with cell 3-4. Then there is still a layer of sort of centimeters five. Highly liquid solution is not needed, otherwise everything floats.

4. Begin in the lid solution. Purify them on the fresh solution until it grabbed. They can be highlighted in the form of a selected pattern or simply in any order. It will be easier to work if you have not immediately worn the track, but to do it in parts, plots of centimeters fifty. It is better to take multicolored lids, the drawing of them will look very beautiful.

5. The lid depressed into the solution must be aligned with the help of a sheet of plywood, along which the rubber image is slightly tapping. So that the lids do not squeeze back, put the same Phaneur and press it on top of bricks around the perimeter and one put in the center. Then the load distribution will be uniform. The process, of course long, but it turns out indescribable beauty!

1. Make tracks from covers and dongs of plastic bottles. You can attract children, let them cut off the bottoms from bottles with scissors, and then help you do the track itself.

2. Prepare a place for the track and set the formwork there. On a well-tumped earth, smear the sand layer in the formwork. Align and water with water.

3. Now in wet sand, start to press the covers and bottoms. From the bottoms, you can lay out the floral cleaner, and lay out the lids any pattern or picture according to the cross-stitch pattern. Do not regret the time and such original tracks will bring the beauty of your site and the joy to all family members.