Garage is not only a parking lot of the car. This is also a workshop, and a resting place, and the club in interest. Therefore, the arrangement of the garage must be comfortable and thoughtful. On a small area it is necessary to place a lot of things, and they should be comfortable. Self-timers for the garage will help this. What only the people do their own hands. From the elementary shelf to the complex device. All this can be made it yourself. But you need to know how. Several ideas on the modernization of the garage and the plan of their implementation in the article.

Self-wear for the garage: ideas for arrangement

The arrangement of the garage is a long-term process. Immediately do everything will not work, you have to constantly upgrade something, change, instinct something new. At the same time, mainly use homemade garage. It requires less money Yes, it still gives pleasure - to make the necessary thing - it is expensive.

Storage of tires and wheels

Each car owner faces the problem of storing the unreasonable "shoes" for the car. Where to join the tires - the sick question. In general, the storage method depends on whether they are mounted on disks or not.

So the tires with disks can be swallowed or stored lying - in the form of a stack by folding them alone on the other. For hanging tires, it is possible to use luggage straps, chains, a metal cable with a diameter of 4 mm and more in a polyethylene sheath. Fasten the belts to the ceiling, the wall, to the top of the beam.

Another available way - Drink pins or hooks into the wall with a small bend radius. The distance between the hooks is slightly larger than the tire diameter. The length of the pin should be such that they do not stick to the tire limits. You can fill them with almost under the ceiling to get the wheels.

Tires without disks can only be stored "standing". For them make special shelves. They are usually welded from the profiled tube. 20 * 20 mm, maximum, 30 * 30 mm. You can also use the corner. Cooking the round pipe is inconvenient, but it can be done from it. - Tires are stacked and held in this case better.

The width of the shelf is the 4th multiple bus width, plus the stock is 10-15 cm for some freedom. The height of the rear wall is slightly above the outer diameter of the wheel. The design is simple \u003d from the side reminds right triangle. Having, to cook such a shelf will not occupy labor.

Shelf for storage tires - Excellent garage homemade This is a factory option with a very inhuman price tag. But it can be borrowed by the idea - the crossbars can be rearranged depending on the size of the tires ... there is little shelf for tires in the garage with a limited space. Tire no - you can fold the shelf

Such shelves are usually hanging on the wall. But the place must be chosen so that the light does not fall into the rubber - it will deteriorate from it. Not the most complex homemade garage, but very useful.

Workplace

Probably, the largest amount of homemade for the garage is associated with the workplace equipment and tool storage systems. And - not the only way to solve this task. First of all, it is necessary to decide where the workplace will be located. There are three options:

• On the entire width of the long wall. If the garage has sufficient length and is the ability to "steal" about 1.5 meters. Dignity - everything is located compact, at hand, does not interfere with walking along the car. The lack of such a solution - you have to wear tools if work is carried out on the street.

  Countertop and many boxes. The main thing is to remember where it lies

• Along one of the long walls. This location is chosen if the garage is wide, but not long enough. It makes sense to position the table and workbench to the left of the entrance - from the driver's seat. But it is not critical. The disadvantage of this location of the workplace in the garage is to move with some caution, but it is more convenient to make / carry out tools into the street.

  The main thing is to properly place the tools

• Taking one of the corners. This is an intermediate option. Moreover, one of the parties can be made longer, the other is shorter.

  Place a desktop in the corner of the garage, and next to put a sofa - the wrong problem of occupying two adjacent sides - a great idea

The table or workbench for the garage makes the boards, we are plywood. Inexpensive, quite reliable. If there is a welding machine and reconciliation skills, you can weld the frame from the corner or profiled pipe. Write again better by moisture-resistant plywood. It turns out a smooth abrasion surface. Of course, it is possible to use and, but the laminating layer is rapidly damaged.

To "not walk" the place under the tabletop to install the shelves or make boxes. Boxes are more comfortable, but to make them - that is still a fruit. It is quite possible to make the shelves and put the boxes knocked from plywood. Plastic boxes and baskets are also suitable. But the walls must be thick.

There is, by the way useful idea - Make a rack for storing a tool from a used canister. Find those whose handle is located on top. Next, everything is simple - one of the sidewall is cut and in the future, this canister is used as a box.

It is not necessary to make a whole rack - it's still difficult to remember where what is. But on the same principle you can make boxes for the shelves. On the ends, by the way, you can stick out the inscriptions or pictures (with pictures the identification occurs faster). Such homemade garage make satisfaction - create useful thing From garbage - a pleasant feeling.

Storage of tools

The most difficult task is to organize the storage of the instrument in the garage. It must be done so that everything is in order, but at the same time, it was at hand and in sight. Moreover, closed boxes are suitable only to very organized people who always put a thing in place. Otherwise you will constantly rummage in the boxes, forgetting where it lies. There are several ideas for convenient storage Trifles and tools. These are completely simple homemade garage.

Quickly solve the problem will help the usual metal mesh. The reinforcing mesh of wire 2 mm is suitable, the cell is 10 cm. Bold it onto the wall, some twirl twin, flex, make hooks, crossbars, etc. You can buy special hooks that are attached to the grid (there are shops selling trading equipment), and conventional double-sided hooks that can be bought or to do from wire are suitable.

Mesh on the wall - way to quickly organize tool storage

Screwdrivers conveniently stored on a special shelf. You take the board, plywood, a thickness of 10-15 mm. The board needs to be good - so that there is no zoom. At then in the plane, drill the holes of different diameters into one or two rows. If the board is quite wide, you can make the holes more larger - for the chisels or even for the handles of the hammers. All chips again cleaned. Now we have to come up with a mount on the wall. You can use a regular bracket. Screwdrivers, chisels, other similar material are inserted into the holes. Convenient, quickly, all in sight.

There are also useful garage homemakes that allow you to organize the storage of the hand tool. Passatia, pliers, pliers, etc. Place convenient problematic. You can hang on the grid. It is convenient to hang, hang - no. But there is a simple decision - to attach the unintelligo board and put on it tool. So that it is conveniently "sat down", the board on one side run. In the cut, it should be similar to an equally chaired triangle.

Yet simple idea To store rechargeable tools, charging and spare batteries to them. Make a shelf as a photo above. At the bottom of the dutches of different formats, and the upper are used as ordinary shelves. The idea is that everything is in one place, quickly gets / installed in place. These homemade garage will make a workplace convenient. Maintain order will be easy.

Camera carrying for garage

Even with very good lighting in the garage itself or day on the street, under the bottom of the car visibility is very low. To illuminate the front front, portable lamps are carrying. These are the simplest homemade for the garage. You can begin with the epic of the arrangement and equipment of the garage space.

In the simplest version, this is a cartridge attached to the wire, a small crochet screen can be attached to it. Such a completely uncomplicated thing. Light bulbs use ordinary - incandescent or housekeeper under standard cartridge. It's not bad, except that these light bulbs be fighting very often, you need to look for how to hang them so that they shine in a particular place. In general, the design needs to be improved. There are several options for alteration.

Unbreakable cartridge for lamp

This lampshade is plastic bottle Perfectly protects the fragile flask of the energy-saving lamp. You can also use lED lampBut the incandescent will not go - too much heats. The design is ordinary - cord with a fork and a cartridge at the end.

The main task is to find a plastic vessel with the walls of translucent milk plastic of medium thickness. Transparent will not go - it will not dispel the light, too thin walls will not save the lamp from strikes. After finding a suitable vessel remains trifle:

It's simple, but such a plander allows you to brightly illuminate exactly the right area, all the rest of the space is flooded with even light, not cutting eyes.

Carrying from LED Embedded Luminaire

The simplest and most common homemade for the garage are portable lamps. Without them, it is inconvenient not only in, but even just on the workbench. Need flat built-in lED lampwhich can be included in 220 V. These models are called "tablets" due to their form. Still need a cord with a fork, piece plastic window sill - To integrate the lamp. A slice of the window sill in size should be greater than the lamp. Specific dimensions Pick yourself. Further actions are:

Everything, homemade carrying is ready. This option is for installation on the floor. The movable leg allows you to change the angle of inclination. So that it is less turned over, inside the case (in its lower part) you can fix a couple of loads.

Secure the cord from carrying the ceiling

Amenities fold out of the smallest things, and help in this very simple homemade for the garage. For example, you can remove the cable from a portable lamp under your feet. Carrying usually make a cheap cable. It is not the most flexible, poorly folds, his coils on the floor fall under the feet. In general, enjoy uncomfortable. You can protect yourself and carry - to hang the cable to the ceiling. The solution is simple, but very effective.

Here is such a "suspension" to the ceiling for carrying can be made with your own hands per hour

• Two anchors with a ring at the end.
• Screed for cable.
• Clamping clamp.
• Metal cable. Long depends on the size of the garage - it is necessary from one wall to another.
• Steel / plastic rings or a steel wire and a piece of pipe to make these rings.
• Carrying with a long cable - its length is about double garage length.

The cable is stretched along the long side of the garage. It is more convenient - not far from the "Worker" wall, where the workbench or other equipment is located. Works are a bit:

Well, that's all. You can use. With such a device, the carrying can be reached into any end of the garage, the cable is not confused and does not cling. Conveniently, time requires little.

Garage compressor do it yourself

The compressor is needed in any garage. And, by the way, this is not the most difficult homemade for the garage. A low-power compressor for a garage to swing tires and other small work can be made with their own hands from the utility materials. For example, from the compressor from the refrigerator. To do this, you will need:

• compressor from the refrigerator;
• a hermetic cylinder with thick walls (you can use flask from the fire extinguisher, a small gas cylinder);
• safety valve for 8 atm;
• pressure gauge;
• fitting;
• oxygen hoses with couplings (select the length on the basis of the sizes of your spare parts);
• the base for the compressor - the thick board is suitable, a piece of plywood.

In order not to download any nasty to the tires, it is desirable to still put a filter - for separating oils, dust and other contaminants. The scheme of the homemade compressor is represented in the photo.

The compressor should be with a starting device. It is included in the network, we look at which air is suused, we note it. You can put a car filter on it - clean air will be hardened.

From the cylinder and the safety valve we collect the oil separator receiver. To do this, we cut two fittings into the balloon - for the input and outlet of the air. At the inlet, we put the safety valve to it with the help of an oxygen hose by connect the output of the compressor.

At the outlet of the receiver-oil separator, we put another oil automotive filter - to remove oils finally. The filter connects with the pressure gauge, and there is already a hose from it, which connects to the bus through the corresponding adapter.

The assembly is completed. But it was convenient to carry this device to carry this device, everything should be consolidated in some way. You can cook frame sizes, attach wheels and handle - for convenient transportation. One of the options for a compressor to swing the wheels is described in the video. There is no receiver, but its functions performs oil filter. You can do it, but with the receiver, the design is more accurate.

Since the compressor in the refrigerator is low-power, it may take a long time to swipe the wheels. You can make it more powerful by installing two compressors that will be run simultaneously. Accordingly, the pressure will be charged twice as fast. But this installation requires a more solid security group. Such homemade requires a little more equipment, as the scheme is still more difficult.

The arrangement of the garage plays the same role in the life of a man, as well as a comfortable kitchen for a woman. This room is distinguished by practicality and asceticism. Here all things are intended for a specific purpose.

With the modern development of the automotive service, the car owner is rarely engaged in self-eliminating any breakdown in the car, both minor and serious. Machine box now serves more for a comfortable parking lot of the car and bring it into order (guidance of purity).

The car itself is such a device, the full operation of which requires technical work, Required space and special equipment. Such work includes:

• change of rubber tires or disks;
• accumulator charging;
• replacement of oil (depending on the season and mileage of the machine);
• refueling wipers with water or non-freezing liquid;
• a number of preventive and regulatory work with the brake system and the engine.

How to equip a garage? First of all, this room is intended for parking and car maintenance. In addition to the main task, the automotive box performs and many other necessary functions.

It serves as a workshop, and storage room, and a place to make, storing fishing and hunting accessories, and even a kind of club where men are going to discuss their problems.

When the room is intended solely for car maintenance, it can be equipped with minimal amenities. If the car owner knows its device perfectly perfectly and is an empty owner, then a lot of accompanying functions are superimposed on the Autobobes, which provide for the internal arrangement of the garage for their implementation.

Premises for servicing and parking machines today are built by whole complexes that have similar boxes, but the arrangement of the garage with their own hands inside each owner performs individually.

Features of the room for the car

Car box must be equipped with benign ventilation. Any car operates on gasoline or diesel fuel, and naturally, these materials allocate pairs, which, accumulating and reaching a certain concentration, with the slightest spark can lead to an explosion.

Based on this, when you are trying to equip the garage with your own hands, it is necessary to provide elementary means of fire extinguishing.

When the engine is running carbon monoxide. When the room is in the room with a working engine and the ventilation system is poorly arranged, there is a threat of poisoning, which admits the likelihood of a deadly outcome.

In such a room, the production of many works use a power tool that requires increased electrical wiring load, such as:

• drill;
• perforator;
• bulgarian;
• grinders.

Special attention to the arrangement of the garage with their own hands should be paid to the wiring. It is best that the entire boxing electrical system is designed for a higher load and network voltage larger than 220 V.

Any closure or spun spark in the room where fuel and lubricants are located, can lead to a fire.

Interior arrangement

Which is a separate room, arise from its owner constantly, as any needs arose. Often in enters the car, the cellar for storing food, canned food and vegetables for the winter is also digging.

Each host, as a rule, plans an internal workplace in the garage for the production of small locksmiths. The arrangement of the garage with their own hands can occur anyhow, but the main thing is not to forget about its initial purpose, nothing should interfere with the car maintenance work.

The internal arrangement is starting with the markup of working zones performing certain functions. The main and largest zone is a parking place for the car. In the center of this site, often the car owner is equipped with a special pit for convenient operation with the bottom of the car. On the floor pits, a place must be assigned a place to install oil storage containers, gasoline or diesel fuel and other combustible liquids. A wall that refers to the working area is determined, and, accordingly, the machine will stand at the most distant distance from it.

The arrangement of the garage should be done so that everything is in its places and did not arise the jet of things that can sprinkle from touching or push and damage the car. Many owners have a question: how to equip a garage inside with your own hands?

Must first include the installation of the workbench and hanging the shelves. The workbench establishes the vice necessary for the implementation of technical works that concern not only cars. All necessary tools, parts, mixtures and liquids are stored on the shelves.

At present, during the abundance of cars and a shortage of a place for their parking, there were automobile complexes consisting of 2-3 or more floors. In the box, located on the second floor, no longer do the observation pit. The owners of such premises appeared the tier of the upper hollow shelves, forming as if the second ceiling.

This design, of course, does not provide unhindered access to the bottom of the car, but significantly increases the useful space of the room, which can be used.

The garage for the man and especially the arrangement of the garage, as a dressing room for the lady - Hobby, Relax, a means of self-expression and peace of mind. It hovers a special aroma of machinery, sawdust and winter rubber. Often the garage has a multipurpose value. This is the parking lot, and the storeroom, and the workshop, and the place of the part of the male company. The arrangement of the garage to its taste and color - Work is purely male, but, as in any work, there are details and tricks. About them and talk.

Wall decoration

When selecting finishing materials for the garage, it is necessary to take into account some target features of the room. The material should be non-flammable (the garage is a cluster of fuel and lubricants, to ignite which is quite a spark), which does not absorb dirt, moisture-resistant and resistant to mechanical damage (suddenly the bumper hooked). What can meet these requirements?

1. Plaster. Cement-sandy solution plasters lines walls And smoothes irregularities.

Attention! All works should be carried out qualified, otherwise there is a risk of cracking.

After grouting all roughness, we apply a protective layer facade paint (It is suitable for use in an aggressive environment). If your garage does not shine a large volume and the place is enough only to go around the perimeter around the machine on tiptoe, try using paint warm, pastel tones at least for visual expansion. However, be prepared for the fact that such a surface will quickly get dirty.

2. Lining from PVC. If your garage is quite generous on square meters, you can afford the economical installation plastic panels From PVC ("eats up" to 10 cm. Spaces). Thanks to this stock, you can heat Fire resistant mineral Vata. Garage walls. Facade lining fire-resistant, waterproof, eco-friendly and externally pretty presentable, but, unfortunately (and maybe fortunately, if the car is a car without scratch), it does not differ in high strength indicators. For color varieties, use the lining with the printed print or alternate the panel of different colors. Such a strip will benefitly emphasize the exclusivity of your Autoboba.

3. Tile I. facing brick. To date best options For the garage arrangement. It is easy to clean, durable and durable. Ceramic tile has a great specific weight than lightweight facing brick, Poet put it only for strong walls with an additional packing of the reinforcement grid. Both of these material have another disadvantage, and this is the price. Cost finishing work Also can fly into a penny. But imagine what envious whists you will hear from your friends when they will see the walls of your garage, decorated under red Brick, and in the center of the panel with formula-1, laid out with shallow tiles. It's worth it.

The garage is both the house for the car, and the repair shop, and the club in interest. That is why the arrangement of the garage box should be thought out to the smallest detail. On a not very large area, it is necessary to place many items so that, if necessary, everything is at hand.

A small instruction on the arrangement of the garage will help to cope with this task. You do not need to possess great skills of skills, you should only apply the maximum fantasy and the minimum of effort. But first of all, we will define where to start.

Garage design

The division of the garage room on the zone is also important as the distribution of free space in the apartment. If you correctly determine the purpose of each meter of the garage area, the workplace device will be completely simple. You can only install comfortable racks and additional auxiliary elements.

The passage zone is a free place. It is advisable to put a clothes hanger. In the light access area there are casual trifles. It will place objects that use everyday demand.

The main thing they should be:

• fire-resistant;
• durable;
• resistant to the impact of various factors.

Moreover, the finishing material should easily be laundered and not absorb odors. Not all materials possess such qualities.

Suitable building materials:

• Plastering mixes. The ideal foundation will hide all the irregularities and defects of the walls.
• Thin trim board (lining). It is used for both internal and exterior finishes.
• Tile. Here you have to work hard, and at the cost not suitable for everyone. At the same time, ceramics is a profitable option. She is non-combustible, just wash and durable. If the walls garage are lined with tiles, you can forget about repair for many years. Registration of the garage premises

Planning the garage area always makes you think. In particular, those who keep order in everything. To equip the garage with your own hands does not make it difficult if you know some tricks in the arrangement of working areas. There is always the opportunity to allocate some space for the necessary tools.

The ideas for the garage do it yourself are so diverse that it is possible to discuss this for a long time.

If you are engaged in the repair of your car yourself, then you just need workbench. It is possible to make it from wooden bars of the desired parameters. But the countertop is obliged to be made of metal.

Large importance is attached to the location of the shelves and racks. They are given the main place indoors. Preferably, such structures are installed along the walls. The photo shows the options for arranging the garage.

You can visually expand the garage space with suspended shelves of metal grid. There you can put old things that will be more useful.

Inscriptions and original stickers will help you place all objects by type.

Small metal parts will always be in place if they are placed on a magnetic tape.

Hooks for hangers can be made of old spanners. They perfectly be a rubber hose or overalls.

Old plastic jars will serve for storing carnations, cogs and similar small items.

The subject of pride I. stylish decoration Your modern garage boxing will be a camshaft, type of organizer. To do this, it is necessary to strengthen the metal sheet with through stuffing and put on the hooks into the holes. From now on, all the tools and items that you use most often will always be in sight.

Bicycles and other sports accessories always occupy a specific area. They can be suspended to strong brackets. So you will save square meters and achieve order on your small territory.

Photo of the arrangement of garage

How to equip a garage with your hands interests many of its owners. It is known that the garage for the car enthusiast is the second home.

This construction is intended for the safety of the car, this is the place where his owner suits the mini workshop, in which you can make repairs, and sometimes it is for yourself a small corner for recreation. How to equip the garage is invited to get acquainted from this article.

Basic provisions for the arrangement of the garage

The main condition for the construction of the garage is to ensure heat and dryness in it. Even in the most severe frost, the car should not be wrapped. If possible, you need to arrange.

In addition, it is necessary:

• Perform the protection of the room from the penetration of foreign ones.
• Provide free and easy access to equipment and tools.
• Think well, what homemade equipment for the garage will need to repair the car. Where it is better to place it.
• Where to install racks, hang shelves, arrange a workplace.

Supplement garage equipment can be aware of observation pit and workbench with tools.

How to place racks and shelves

You can provide maximum comfort in the garage in the presence of sufficient free space, which is often complicated. A large space is stored equipment and working tools.

Therefore, if we equip the garage with your own hands, you should maximize the maximum place to allocate under the shelves or racks (see), but it is necessary that they allow them to freely move around the room.

You can hang the shelves everywhere where no one will cling to them or hit:

• Over the windows, if available.
• Above tables.
• Racks, as shown in the photo.

Tip: When the shelves device, the distance to the machine on each side should be withstanding at least one meter.

• It is convenient to accommodate the shelves to use the wall, located furthest from the gate. Here you can store the compressor, work tools, install the workbench - everything is at hand and does not interfere with the movement on the garage.
• For large quantities The shelves should be installed and a small locker, where it will be possible to hang work clothes, keep the vehicle.

How to better equip the observation pit

Before proceeding with the arrangement of the observation pit, it is necessary to decide - what homemade garage equipment there can be placed and the feasibility of this. It makes no sense to fulfill the arrangement of the observation pit to the one who often uses the overpass on the street.

When solving that such a pit is needed, it should be considered:

• Her walls and bottom are performed from concrete.
• The edges are strengthened with metal corners.
• The observation pit should be closed when it is not used.

Tip: To collect water, accidentally falling down, follows in the corner of the pit to arrange a drainage well of such sizes so that it is convenient to pull out the accumulated water from it. For protection from accidental falling into it, the hole is covered with a grid.

In the observation pit it is possible:

• Place the homemade garage equipment, which will be needed during repair.
• In the walls, arrange a niche where it will be convenient to fold the tool used.
• It is worth taking care of the lighting of the pit. Luminaires are installed here or a place for the location of the portable lamp.

For minor work under the hood, replace the disk or changing the wheel is a fairly standard set of car enthusiast tools and jack. And to perform more complex works you need to use special garage homemade equipment.

What special equipment is worth using in the garage

Convenient additions to equip the garage with their own hands are:

• Crafting table. It is better to use wood and metal for its manufacture. Metallic sheet is covered work zoneThat protects the tree from premature wear. The workbench is better to produce with two or three levels to accommodate in it as much as possible things you need.
• Welding machine.
• Water oil separator. It can be used to purify air from vapor, oil droplets, water and other small particles present in it. Such a device is quite convenient to use when the car is painted for a uniform distribution of paint for metal.
• Washing. Such garage equipment homemade is necessary for care external species cars. In this case, the hose or pipe is supplied to the garage of water and the drain is made in the sewer.

Tip: When organizing a car wash, it is necessary to protect electrical wiring and lighting with special care.

How to make high-quality ventilation and lighting

Well organized ventilation:

• Eliminates the room from harmful and unpleasant odors.
• Protects it from the appearance of dampness and large dusting (see).

Ventilation holes are usually made on both sides of the gate, not far from the floor surface and closed with lattices. On the opposite wall, the same holes are made, but under the ceiling.

The best light is natural, so it is better to think about the presence of a window in the garage.

In the absence of such a possibility, several lighting zones should be taken:

• General.
• Above the workplace.
• Portable, used to illumination in the most necessary case.

How can you equip a place to work in the garage

With the workplace arrangement, the most important thing is to provide as much free space as possible.

In the garage space occupy:

• Car.
• His replaceable tires.
• Crafting table.
• Tool kits.
• Unnecessary things can be stored
• The pit is used as a cellar.
• Walls are hanging out with gardening equipment.

If the garage is located on a private site or dacha, then for cleaning too much here, most likely there is a cellar, a barn, a warehouse or household premises, and completely unnecessary things should simply be thrown away.

If necessary, it is done:

• Garage repair.
• Warming of all its elements.
• Interior decoration.

After that, it is equipped with a workplace.

There must be:

• Conveniently.
• Cozy.
• It is provided with everything necessary what is required for the owner of the garage, which is associated with the different interests of the hosts of the premises. Some will repair old receivers, others carry out the repair of garage equipment, someone carry out a wood thread, and someone is more interesting to modernize the garden tool.

The special instruction on the organization of the workplace does not exist. Here everyone decides himself what he needs. But some recommendations should be considered.

These include:

• The device is a convenient desktop, which can be ready-made workbench.
• The table should have several boxes where minor workshops will be posted:

1. instruments;
2. different fasteners;
3. jars with solutions;
4. diodes and other little things.

• Over the table lay the shelves, hooks, as shown in the photo.

It should be noted that it is important how tools and additional accessories will be located, but you should determine and what they will be. In addition to the standard set, the interests and personal requirements of the garage owner are taken into account.

Most likely, you will need:

• A hammer.
• Screwdriver Set.
• Pliers.
• Lubes.
• Caucasics.
• Soldering iron.
• Bulgarian.
• Electric drill.
• Electrolzik.
• Screwdriver.
• More serious equipment and machines.
• Related accessories: vice and clamps.

In addition to the workplace arrangement, in the presence of free space, you can envisage a corner for recreation.

How to equip a room in the garage can be viewed on video.

In addition to the acquired standard tool set, many car enthusiasts make some devices themselves. It can be unique wrenches, to dismantle and install the vehicle nodes, you will need a puller and other minor devices.

More complex equipment includes homemade welders, Compressors, filters for cleaning compressed air from condensate and oil vapor. Comfortable, cozy and multifunctional garage - the dream of any car enthusiast.